/* debug PC keyboard */
//#define DEBUG_KBD
+#ifdef DEBUG_KBD
+#define DPRINTF(fmt, ...) \
+ do { printf("KBD: " fmt , ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...)
+#endif
/* Keyboard Controller Commands */
#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */
#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */
#define KBD_CCMD_DISABLE_A20 0xDD /* HP vectra only ? */
#define KBD_CCMD_ENABLE_A20 0xDF /* HP vectra only ? */
-#define KBD_CCMD_RESET 0xFE
+#define KBD_CCMD_PULSE_BITS_3_0 0xF0 /* Pulse bits 3-0 of the output port P2. */
+#define KBD_CCMD_RESET 0xFE /* Pulse bit 0 of the output port P2 = CPU reset. */
+#define KBD_CCMD_NO_OP 0xFF /* Pulse no bits of the output port P2. */
/* Keyboard Commands */
#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */
#define KBD_MODE_RFU 0x80
+/* Output Port Bits */
+#define KBD_OUT_RESET 0x01 /* 1=normal mode, 0=reset */
+#define KBD_OUT_A20 0x02 /* x86 only */
+#define KBD_OUT_OBF 0x10 /* Keyboard output buffer full */
+#define KBD_OUT_MOUSE_OBF 0x20 /* Mouse output buffer full */
+
/* Mouse Commands */
#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */
#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */
uint8_t write_cmd; /* if non zero, write data to port 60 is expected */
uint8_t status;
uint8_t mode;
+ uint8_t outport;
/* Bitmask of devices with data available. */
uint8_t pending;
void *kbd;
qemu_irq irq_kbd;
qemu_irq irq_mouse;
+ qemu_irq *a20_out;
target_phys_addr_t mask;
} KBDState;
-static KBDState kbd_state;
-
/* update irq and KBD_STAT_[MOUSE_]OBF */
/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
incorrect, but it avoids having to simulate exact delays */
irq_kbd_level = 0;
irq_mouse_level = 0;
s->status &= ~(KBD_STAT_OBF | KBD_STAT_MOUSE_OBF);
+ s->outport &= ~(KBD_OUT_OBF | KBD_OUT_MOUSE_OBF);
if (s->pending) {
s->status |= KBD_STAT_OBF;
+ s->outport |= KBD_OUT_OBF;
/* kbd data takes priority over aux data. */
if (s->pending == KBD_PENDING_AUX) {
s->status |= KBD_STAT_MOUSE_OBF;
+ s->outport |= KBD_OUT_MOUSE_OBF;
if (s->mode & KBD_MODE_MOUSE_INT)
irq_mouse_level = 1;
} else {
KBDState *s = opaque;
int val;
val = s->status;
-#if defined(DEBUG_KBD)
- printf("kbd: read status=0x%02x\n", val);
-#endif
+ DPRINTF("kbd: read status=0x%02x\n", val);
return val;
}
ps2_queue(s->kbd, b);
}
+static void outport_write(KBDState *s, uint32_t val)
+{
+ DPRINTF("kbd: write outport=0x%02x\n", val);
+ s->outport = val;
+ if (s->a20_out) {
+ qemu_set_irq(*s->a20_out, (val >> 1) & 1);
+ }
+ if (!(val & 1)) {
+ qemu_system_reset_request();
+ }
+}
+
static void kbd_write_command(void *opaque, uint32_t addr, uint32_t val)
{
KBDState *s = opaque;
-#ifdef DEBUG_KBD
- printf("kbd: write cmd=0x%02x\n", val);
-#endif
+ DPRINTF("kbd: write cmd=0x%02x\n", val);
+
+ /* Bits 3-0 of the output port P2 of the keyboard controller may be pulsed
+ * low for approximately 6 micro seconds. Bits 3-0 of the KBD_CCMD_PULSE
+ * command specify the output port bits to be pulsed.
+ * 0: Bit should be pulsed. 1: Bit should not be modified.
+ * The only useful version of this command is pulsing bit 0,
+ * which does a CPU reset.
+ */
+ if((val & KBD_CCMD_PULSE_BITS_3_0) == KBD_CCMD_PULSE_BITS_3_0) {
+ if(!(val & 1))
+ val = KBD_CCMD_RESET;
+ else
+ val = KBD_CCMD_NO_OP;
+ }
+
switch(val) {
case KBD_CCMD_READ_MODE:
kbd_queue(s, s->mode, 0);
kbd_queue(s, 0x00, 0);
break;
case KBD_CCMD_READ_OUTPORT:
- /* XXX: check that */
-#ifdef TARGET_I386
- val = 0x01 | (ioport_get_a20() << 1);
-#else
- val = 0x01;
-#endif
- if (s->status & KBD_STAT_OBF)
- val |= 0x10;
- if (s->status & KBD_STAT_MOUSE_OBF)
- val |= 0x20;
- kbd_queue(s, val, 0);
+ kbd_queue(s, s->outport, 0);
break;
-#ifdef TARGET_I386
case KBD_CCMD_ENABLE_A20:
- ioport_set_a20(1);
+ if (s->a20_out) {
+ qemu_irq_raise(*s->a20_out);
+ }
+ s->outport |= KBD_OUT_A20;
break;
case KBD_CCMD_DISABLE_A20:
- ioport_set_a20(0);
+ if (s->a20_out) {
+ qemu_irq_lower(*s->a20_out);
+ }
+ s->outport &= ~KBD_OUT_A20;
break;
-#endif
case KBD_CCMD_RESET:
qemu_system_reset_request();
break;
- case 0xff:
- /* ignore that - I don't know what is its use */
+ case KBD_CCMD_NO_OP:
+ /* ignore that */
break;
default:
fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", val);
else
val = ps2_read_data(s->kbd);
-#if defined(DEBUG_KBD)
- printf("kbd: read data=0x%02x\n", val);
-#endif
+ DPRINTF("kbd: read data=0x%02x\n", val);
return val;
}
{
KBDState *s = opaque;
-#ifdef DEBUG_KBD
- printf("kbd: write data=0x%02x\n", val);
-#endif
+ DPRINTF("kbd: write data=0x%02x\n", val);
switch(s->write_cmd) {
case 0:
kbd_queue(s, val, 1);
break;
case KBD_CCMD_WRITE_OUTPORT:
-#ifdef TARGET_I386
- ioport_set_a20((val >> 1) & 1);
-#endif
- if (!(val & 1)) {
- qemu_system_reset_request();
- }
+ outport_write(s, val);
break;
case KBD_CCMD_WRITE_MOUSE:
ps2_write_mouse(s->mouse, val);
s->mode = KBD_MODE_KBD_INT | KBD_MODE_MOUSE_INT;
s->status = KBD_STAT_CMD | KBD_STAT_UNLOCKED;
+ s->outport = KBD_OUT_RESET | KBD_OUT_A20;
}
-static void kbd_save(QEMUFile* f, void* opaque)
-{
- KBDState *s = (KBDState*)opaque;
-
- qemu_put_8s(f, &s->write_cmd);
- qemu_put_8s(f, &s->status);
- qemu_put_8s(f, &s->mode);
- qemu_put_8s(f, &s->pending);
-}
-
-static int kbd_load(QEMUFile* f, void* opaque, int version_id)
-{
- KBDState *s = (KBDState*)opaque;
-
- if (version_id != 3)
- return -EINVAL;
- qemu_get_8s(f, &s->write_cmd);
- qemu_get_8s(f, &s->status);
- qemu_get_8s(f, &s->mode);
- qemu_get_8s(f, &s->pending);
- return 0;
-}
-
-void i8042_init(qemu_irq kbd_irq, qemu_irq mouse_irq, uint32_t io_base)
-{
- KBDState *s = &kbd_state;
-
- s->irq_kbd = kbd_irq;
- s->irq_mouse = mouse_irq;
-
- kbd_reset(s);
- register_savevm("pckbd", 0, 3, kbd_save, kbd_load, s);
- register_ioport_read(io_base, 1, 1, kbd_read_data, s);
- register_ioport_write(io_base, 1, 1, kbd_write_data, s);
- register_ioport_read(io_base + 4, 1, 1, kbd_read_status, s);
- register_ioport_write(io_base + 4, 1, 1, kbd_write_command, s);
-
- s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
- s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
-#ifdef TARGET_I386
- vmmouse_init(s->mouse);
-#endif
- qemu_register_reset(kbd_reset, s);
-}
+static const VMStateDescription vmstate_kbd = {
+ .name = "pckbd",
+ .version_id = 3,
+ .minimum_version_id = 3,
+ .minimum_version_id_old = 3,
+ .fields = (VMStateField []) {
+ VMSTATE_UINT8(write_cmd, KBDState),
+ VMSTATE_UINT8(status, KBDState),
+ VMSTATE_UINT8(mode, KBDState),
+ VMSTATE_UINT8(pending, KBDState),
+ VMSTATE_END_OF_LIST()
+ }
+};
/* Memory mapped interface */
static uint32_t kbd_mm_readb (void *opaque, target_phys_addr_t addr)
target_phys_addr_t base, ram_addr_t size,
target_phys_addr_t mask)
{
- KBDState *s = &kbd_state;
+ KBDState *s = g_malloc0(sizeof(KBDState));
int s_io_memory;
s->irq_kbd = kbd_irq;
s->irq_mouse = mouse_irq;
s->mask = mask;
- kbd_reset(s);
- register_savevm("pckbd", 0, 3, kbd_save, kbd_load, s);
- s_io_memory = cpu_register_io_memory(kbd_mm_read, kbd_mm_write, s);
+ vmstate_register(NULL, 0, &vmstate_kbd, s);
+ s_io_memory = cpu_register_io_memory(kbd_mm_read, kbd_mm_write, s,
+ DEVICE_NATIVE_ENDIAN);
cpu_register_physical_memory(base, size, s_io_memory);
s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
-#ifdef TARGET_I386
- vmmouse_init(s->mouse);
-#endif
qemu_register_reset(kbd_reset, s);
}
KBDState kbd;
} ISAKBDState;
-static void i8042_initfn(ISADevice *dev)
+void i8042_isa_mouse_fake_event(void *opaque)
+{
+ ISADevice *dev = opaque;
+ KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
+
+ ps2_mouse_fake_event(s->mouse);
+}
+
+void i8042_setup_a20_line(ISADevice *dev, qemu_irq *a20_out)
+{
+ KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
+
+ s->a20_out = a20_out;
+}
+
+static const VMStateDescription vmstate_kbd_isa = {
+ .name = "pckbd",
+ .version_id = 3,
+ .minimum_version_id = 3,
+ .minimum_version_id_old = 3,
+ .fields = (VMStateField []) {
+ VMSTATE_STRUCT(kbd, ISAKBDState, 0, vmstate_kbd, KBDState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static int i8042_initfn(ISADevice *dev)
{
KBDState *s = &(DO_UPCAST(ISAKBDState, dev, dev)->kbd);
- isa_init_irq(dev, &s->irq_kbd);
- isa_init_irq(dev, &s->irq_mouse);
+ isa_init_irq(dev, &s->irq_kbd, 1);
+ isa_init_irq(dev, &s->irq_mouse, 12);
- kbd_reset(s);
- register_savevm("pckbd", 0, 3, kbd_save, kbd_load, s);
- register_ioport_read(dev->iobase[0], 1, 1, kbd_read_data, s);
- register_ioport_write(dev->iobase[0], 1, 1, kbd_write_data, s);
- register_ioport_read(dev->iobase[1], 1, 1, kbd_read_status, s);
- register_ioport_write(dev->iobase[1], 1, 1, kbd_write_command, s);
+ register_ioport_read(0x60, 1, 1, kbd_read_data, s);
+ register_ioport_write(0x60, 1, 1, kbd_write_data, s);
+ isa_init_ioport(dev, 0x60);
+ register_ioport_read(0x64, 1, 1, kbd_read_status, s);
+ register_ioport_write(0x64, 1, 1, kbd_write_command, s);
+ isa_init_ioport(dev, 0x64);
s->kbd = ps2_kbd_init(kbd_update_kbd_irq, s);
s->mouse = ps2_mouse_init(kbd_update_aux_irq, s);
-#ifdef TARGET_I386
- vmmouse_init(s->mouse);
-#endif
qemu_register_reset(kbd_reset, s);
+ return 0;
}
static ISADeviceInfo i8042_info = {
.qdev.name = "i8042",
.qdev.size = sizeof(ISAKBDState),
+ .qdev.vmsd = &vmstate_kbd_isa,
.qdev.no_user = 1,
.init = i8042_initfn,
};
projects / qemu.git / blobdiff