*/
#include "hw.h"
+#include "sysbus.h"
#include "pxa.h"
#define PXA2XX_GPIO_BANKS 4
+typedef struct PXA2xxGPIOInfo PXA2xxGPIOInfo;
struct PXA2xxGPIOInfo {
- qemu_irq *pic;
+ SysBusDevice busdev;
+ qemu_irq irq0, irq1, irqX;
int lines;
+ int ncpu;
CPUState *cpu_env;
- qemu_irq *in;
/* XXX: GNU C vectors are more suitable */
uint32_t ilevel[PXA2XX_GPIO_BANKS];
static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
{
if (s->status[0] & (1 << 0))
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_0]);
+ qemu_irq_raise(s->irq0);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_0]);
+ qemu_irq_lower(s->irq0);
if (s->status[0] & (1 << 1))
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_1]);
+ qemu_irq_raise(s->irq1);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_1]);
+ qemu_irq_lower(s->irq1);
if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
- qemu_irq_raise(s->pic[PXA2XX_PIC_GPIO_X]);
+ qemu_irq_raise(s->irqX);
else
- qemu_irq_lower(s->pic[PXA2XX_PIC_GPIO_X]);
+ qemu_irq_lower(s->irqX);
}
/* Bitmap of pins used as standby and sleep wake-up sources. */
pxa2xx_gpio_write
};
-static void pxa2xx_gpio_save(QEMUFile *f, void *opaque)
+DeviceState *pxa2xx_gpio_init(target_phys_addr_t base,
+ CPUState *env, DeviceState *pic, int lines)
{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- int i;
-
- qemu_put_be32(f, s->lines);
-
- for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
- qemu_put_be32s(f, &s->ilevel[i]);
- qemu_put_be32s(f, &s->olevel[i]);
- qemu_put_be32s(f, &s->dir[i]);
- qemu_put_be32s(f, &s->rising[i]);
- qemu_put_be32s(f, &s->falling[i]);
- qemu_put_be32s(f, &s->status[i]);
- qemu_put_be32s(f, &s->gafr[i * 2 + 0]);
- qemu_put_be32s(f, &s->gafr[i * 2 + 1]);
-
- qemu_put_be32s(f, &s->prev_level[i]);
- }
+ DeviceState *dev;
+
+ dev = qdev_create(NULL, "pxa2xx-gpio");
+ qdev_prop_set_int32(dev, "lines", lines);
+ qdev_prop_set_int32(dev, "ncpu", env->cpu_index);
+ qdev_init_nofail(dev);
+
+ sysbus_mmio_map(sysbus_from_qdev(dev), 0, base);
+ sysbus_connect_irq(sysbus_from_qdev(dev), 0,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
+ sysbus_connect_irq(sysbus_from_qdev(dev), 1,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
+ sysbus_connect_irq(sysbus_from_qdev(dev), 2,
+ qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
+
+ return dev;
}
-static int pxa2xx_gpio_load(QEMUFile *f, void *opaque, int version_id)
-{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- int i;
-
- if (qemu_get_be32(f) != s->lines)
- return -EINVAL;
-
- for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
- qemu_get_be32s(f, &s->ilevel[i]);
- qemu_get_be32s(f, &s->olevel[i]);
- qemu_get_be32s(f, &s->dir[i]);
- qemu_get_be32s(f, &s->rising[i]);
- qemu_get_be32s(f, &s->falling[i]);
- qemu_get_be32s(f, &s->status[i]);
- qemu_get_be32s(f, &s->gafr[i * 2 + 0]);
- qemu_get_be32s(f, &s->gafr[i * 2 + 1]);
-
- qemu_get_be32s(f, &s->prev_level[i]);
- }
-
- return 0;
-}
-
-PXA2xxGPIOInfo *pxa2xx_gpio_init(target_phys_addr_t base,
- CPUState *env, qemu_irq *pic, int lines)
+static int pxa2xx_gpio_initfn(SysBusDevice *dev)
{
int iomemtype;
PXA2xxGPIOInfo *s;
- s = (PXA2xxGPIOInfo *)
- qemu_mallocz(sizeof(PXA2xxGPIOInfo));
- memset(s, 0, sizeof(PXA2xxGPIOInfo));
- s->pic = pic;
- s->lines = lines;
- s->cpu_env = env;
- s->in = qemu_allocate_irqs(pxa2xx_gpio_set, s, lines);
+ s = FROM_SYSBUS(PXA2xxGPIOInfo, dev);
- iomemtype = cpu_register_io_memory(pxa2xx_gpio_readfn,
- pxa2xx_gpio_writefn, s, DEVICE_NATIVE_ENDIAN);
- cpu_register_physical_memory(base, 0x00001000, iomemtype);
+ s->cpu_env = qemu_get_cpu(s->ncpu);
- register_savevm(NULL, "pxa2xx_gpio", 0, 0,
- pxa2xx_gpio_save, pxa2xx_gpio_load, s);
-
- return s;
-}
+ qdev_init_gpio_in(&dev->qdev, pxa2xx_gpio_set, s->lines);
+ qdev_init_gpio_out(&dev->qdev, s->handler, s->lines);
-qemu_irq *pxa2xx_gpio_in_get(PXA2xxGPIOInfo *s)
-{
- return s->in;
-}
+ iomemtype = cpu_register_io_memory(pxa2xx_gpio_readfn,
+ pxa2xx_gpio_writefn, s, DEVICE_NATIVE_ENDIAN);
-void pxa2xx_gpio_out_set(PXA2xxGPIOInfo *s,
- int line, qemu_irq handler)
-{
- if (line >= s->lines) {
- printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
- return;
- }
+ sysbus_init_mmio(dev, 0x1000, iomemtype);
+ sysbus_init_irq(dev, &s->irq0);
+ sysbus_init_irq(dev, &s->irq1);
+ sysbus_init_irq(dev, &s->irqX);
- s->handler[line] = handler;
+ return 0;
}
/*
* Registers a callback to notify on GPLR reads. This normally
* shouldn't be needed but it is used for the hack on Spitz machines.
*/
-void pxa2xx_gpio_read_notifier(PXA2xxGPIOInfo *s, qemu_irq handler)
+void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
{
+ PXA2xxGPIOInfo *s = FROM_SYSBUS(PXA2xxGPIOInfo, sysbus_from_qdev(dev));
s->read_notify = handler;
}
+
+static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
+ .name = "pxa2xx-gpio",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .minimum_version_id_old = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_INT32(lines, PXA2xxGPIOInfo),
+ VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
+ VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
+ VMSTATE_END_OF_LIST(),
+ },
+};
+
+static SysBusDeviceInfo pxa2xx_gpio_info = {
+ .init = pxa2xx_gpio_initfn,
+ .qdev.name = "pxa2xx-gpio",
+ .qdev.desc = "PXA2xx GPIO controller",
+ .qdev.size = sizeof(PXA2xxGPIOInfo),
+ .qdev.props = (Property []) {
+ DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
+ DEFINE_PROP_INT32("ncpu", PXA2xxGPIOInfo, ncpu, 0),
+ DEFINE_PROP_END_OF_LIST(),
+ }
+};
+
+static void pxa2xx_gpio_register(void)
+{
+ sysbus_register_withprop(&pxa2xx_gpio_info);
+}
+device_init(pxa2xx_gpio_register);
projects / qemu.git / blobdiff