#include "primecell.h"
#include "devices.h"
#include "pci.h"
-#include "usb-ohci.h"
#include "net.h"
#include "sysemu.h"
#include "boards.h"
-#include "bitbang_i2c.h"
+#include "i2c.h"
#include "blockdev.h"
#include "exec-memory.h"
#define SMP_BOOT_ADDR 0xe0000000
-
-typedef struct {
- SysBusDevice busdev;
- MemoryRegion iomem;
- bitbang_i2c_interface *bitbang;
- int out;
- int in;
-} RealViewI2CState;
-
-static uint64_t realview_i2c_read(void *opaque, target_phys_addr_t offset,
- unsigned size)
-{
- RealViewI2CState *s = (RealViewI2CState *)opaque;
-
- if (offset == 0) {
- return (s->out & 1) | (s->in << 1);
- } else {
- hw_error("realview_i2c_read: Bad offset 0x%x\n", (int)offset);
- return -1;
- }
-}
-
-static void realview_i2c_write(void *opaque, target_phys_addr_t offset,
- uint64_t value, unsigned size)
-{
- RealViewI2CState *s = (RealViewI2CState *)opaque;
-
- switch (offset) {
- case 0:
- s->out |= value & 3;
- break;
- case 4:
- s->out &= ~value;
- break;
- default:
- hw_error("realview_i2c_write: Bad offset 0x%x\n", (int)offset);
- }
- bitbang_i2c_set(s->bitbang, BITBANG_I2C_SCL, (s->out & 1) != 0);
- s->in = bitbang_i2c_set(s->bitbang, BITBANG_I2C_SDA, (s->out & 2) != 0);
-}
-
-static const MemoryRegionOps realview_i2c_ops = {
- .read = realview_i2c_read,
- .write = realview_i2c_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-static int realview_i2c_init(SysBusDevice *dev)
-{
- RealViewI2CState *s = FROM_SYSBUS(RealViewI2CState, dev);
- i2c_bus *bus;
-
- bus = i2c_init_bus(&dev->qdev, "i2c");
- s->bitbang = bitbang_i2c_init(bus);
- memory_region_init_io(&s->iomem, &realview_i2c_ops, s,
- "realview-i2c", 0x1000);
- sysbus_init_mmio(dev, &s->iomem);
- return 0;
-}
-
-static SysBusDeviceInfo realview_i2c_info = {
- .init = realview_i2c_init,
- .qdev.name = "realview_i2c",
- .qdev.size = sizeof(RealViewI2CState),
-};
-
-static void realview_register_devices(void)
-{
- sysbus_register_withprop(&realview_i2c_info);
-}
+#define SMP_BOOTREG_ADDR 0x10000030
/* Board init. */
static struct arm_boot_info realview_binfo = {
.smp_loader_start = SMP_BOOT_ADDR,
+ .smp_bootreg_addr = SMP_BOOTREG_ADDR,
};
/* The following two lists must be consistent. */
const char *initrd_filename, const char *cpu_model,
enum realview_board_type board_type)
{
- CPUState *env = NULL;
+ ARMCPU *cpu = NULL;
+ CPUARMState *env;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
break;
}
for (n = 0; n < smp_cpus; n++) {
- env = cpu_init(cpu_model);
- if (!env) {
+ cpu = cpu_arm_init(cpu_model);
+ if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
- irqp = arm_pic_init_cpu(env);
+ irqp = arm_pic_init_cpu(cpu);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
+ env = &cpu->env;
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
sys_id = is_pb ? 0x01780500 : 0xc1400400;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
- qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
+ qdev_init_nofail(sysctl);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
if (is_mpcore) {
+ target_phys_addr_t periphbase;
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
- realview_binfo.smp_priv_base = 0x1f000000;
+ periphbase = 0x1f000000;
} else {
- realview_binfo.smp_priv_base = 0x10100000;
+ periphbase = 0x10100000;
}
- sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
+ sysbus_mmio_map(busdev, 0, periphbase);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
+ sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
+ /* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
+ realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
sysbus_connect_irq(busdev, 3, pic[51]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
- usb_ohci_init_pci(pci_bus, -1);
+ pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
}
}
- dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
+ dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
- arm_load_kernel(first_cpu, &realview_binfo);
+ arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);
}
static void realview_eb_init(ram_addr_t ram_size,
}
machine_init(realview_machine_init);
-device_init(realview_register_devices)
projects / qemu.git / blobdiff