#include "hw.h"
#include "block.h"
+#include "block_int.h"
#include "sd.h"
//#define DEBUG_SD 1
#ifdef DEBUG_SD
-#define DPRINTF(fmt, args...) \
-do { fprintf(stderr, "SD: " fmt , ##args); } while (0)
+#define DPRINTF(fmt, ...) \
+do { fprintf(stderr, "SD: " fmt , ## __VA_ARGS__); } while (0)
#else
-#define DPRINTF(fmt, args...) do {} while(0)
+#define DPRINTF(fmt, ...) do {} while(0)
#endif
typedef enum {
uint32_t vhs;
int wp_switch;
int *wp_groups;
- uint32_t size;
+ uint64_t size;
int blk_len;
uint32_t erase_start;
uint32_t erase_end;
int spi;
int current_cmd;
int blk_written;
- uint32_t data_start;
+ uint64_t data_start;
uint32_t data_offset;
uint8_t data[512];
qemu_irq readonly_cb;
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe,
};
-static void sd_set_csd(SDState *sd, uint32_t size)
+static void sd_set_csd(SDState *sd, uint64_t size)
{
uint32_t csize = (size >> (CMULT_SHIFT + HWBLOCK_SHIFT)) - 1;
uint32_t sectsize = (1 << (SECTOR_SHIFT + 1)) - 1;
uint32_t wpsize = (1 << (WPGROUP_SHIFT + 1)) - 1;
- sd->csd[0] = 0x00; /* CSD structure */
- sd->csd[1] = 0x26; /* Data read access-time-1 */
- sd->csd[2] = 0x00; /* Data read access-time-2 */
- sd->csd[3] = 0x5a; /* Max. data transfer rate */
- sd->csd[4] = 0x5f; /* Card Command Classes */
- sd->csd[5] = 0x50 | /* Max. read data block length */
- HWBLOCK_SHIFT;
- sd->csd[6] = 0xe0 | /* Partial block for read allowed */
- ((csize >> 10) & 0x03);
- sd->csd[7] = 0x00 | /* Device size */
- ((csize >> 2) & 0xff);
- sd->csd[8] = 0x3f | /* Max. read current */
- ((csize << 6) & 0xc0);
- sd->csd[9] = 0xfc | /* Max. write current */
- ((CMULT_SHIFT - 2) >> 1);
- sd->csd[10] = 0x40 | /* Erase sector size */
- (((CMULT_SHIFT - 2) << 7) & 0x80) | (sectsize >> 1);
- sd->csd[11] = 0x00 | /* Write protect group size */
- ((sectsize << 7) & 0x80) | wpsize;
- sd->csd[12] = 0x90 | /* Write speed factor */
- (HWBLOCK_SHIFT >> 2);
- sd->csd[13] = 0x20 | /* Max. write data block length */
- ((HWBLOCK_SHIFT << 6) & 0xc0);
- sd->csd[14] = 0x00; /* File format group */
- sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1;
+ if (size <= 0x40000000) { /* Standard Capacity SD */
+ sd->csd[0] = 0x00; /* CSD structure */
+ sd->csd[1] = 0x26; /* Data read access-time-1 */
+ sd->csd[2] = 0x00; /* Data read access-time-2 */
+ sd->csd[3] = 0x5a; /* Max. data transfer rate */
+ sd->csd[4] = 0x5f; /* Card Command Classes */
+ sd->csd[5] = 0x50 | /* Max. read data block length */
+ HWBLOCK_SHIFT;
+ sd->csd[6] = 0xe0 | /* Partial block for read allowed */
+ ((csize >> 10) & 0x03);
+ sd->csd[7] = 0x00 | /* Device size */
+ ((csize >> 2) & 0xff);
+ sd->csd[8] = 0x3f | /* Max. read current */
+ ((csize << 6) & 0xc0);
+ sd->csd[9] = 0xfc | /* Max. write current */
+ ((CMULT_SHIFT - 2) >> 1);
+ sd->csd[10] = 0x40 | /* Erase sector size */
+ (((CMULT_SHIFT - 2) << 7) & 0x80) | (sectsize >> 1);
+ sd->csd[11] = 0x00 | /* Write protect group size */
+ ((sectsize << 7) & 0x80) | wpsize;
+ sd->csd[12] = 0x90 | /* Write speed factor */
+ (HWBLOCK_SHIFT >> 2);
+ sd->csd[13] = 0x20 | /* Max. write data block length */
+ ((HWBLOCK_SHIFT << 6) & 0xc0);
+ sd->csd[14] = 0x00; /* File format group */
+ sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1;
+ } else { /* SDHC */
+ size /= 512 * 1024;
+ size -= 1;
+ sd->csd[0] = 0x40;
+ sd->csd[1] = 0x0e;
+ sd->csd[2] = 0x00;
+ sd->csd[3] = 0x32;
+ sd->csd[4] = 0x5b;
+ sd->csd[5] = 0x59;
+ sd->csd[6] = 0x00;
+ sd->csd[7] = (size >> 16) & 0xff;
+ sd->csd[8] = (size >> 8) & 0xff;
+ sd->csd[9] = (size & 0xff);
+ sd->csd[10] = 0x7f;
+ sd->csd[11] = 0x80;
+ sd->csd[12] = 0x0a;
+ sd->csd[13] = 0x40;
+ sd->csd[14] = 0x00;
+ sd->csd[15] = 0x00;
+ sd->ocr |= 1 << 30; /* High Capacity SD Memort Card */
+ }
}
static void sd_set_rca(SDState *sd)
static void sd_reset(SDState *sd, BlockDriverState *bdrv)
{
- uint32_t size;
+ uint64_t size;
uint64_t sect;
if (bdrv) {
}
sect <<= 9;
- if (sect > 0x40000000)
- size = 0x40000000; /* 1 gig */
- else
- size = sect + 1;
+ size = sect + 1;
sect = (size >> (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT)) + 1;
sd->pwd_len = 0;
}
-static void sd_cardchange(void *opaque)
+static void sd_cardchange(void *opaque, int reason)
{
SDState *sd = opaque;
+
+ if (!(reason & CHANGE_MEDIA)) {
+ return;
+ }
+
qemu_set_irq(sd->inserted_cb, bdrv_is_inserted(sd->bdrv));
if (bdrv_is_inserted(sd->bdrv)) {
sd_reset(sd, sd->bdrv);
SDState *sd;
sd = (SDState *) qemu_mallocz(sizeof(SDState));
- sd->buf = qemu_memalign(512, 512);
+ sd->buf = qemu_blockalign(bs, 512);
sd->spi = is_spi;
sd->enable = 1;
sd_reset(sd, bs);
{
sd->readonly_cb = readonly;
sd->inserted_cb = insert;
- qemu_set_irq(readonly, bdrv_is_read_only(sd->bdrv));
- qemu_set_irq(insert, bdrv_is_inserted(sd->bdrv));
+ qemu_set_irq(readonly, sd->bdrv ? bdrv_is_read_only(sd->bdrv) : 0);
+ qemu_set_irq(insert, sd->bdrv ? bdrv_is_inserted(sd->bdrv) : 0);
}
static void sd_erase(SDState *sd)
sd->card_status |= WP_ERASE_SKIP;
}
-static uint32_t sd_wpbits(SDState *sd, uint32_t addr)
+static uint32_t sd_wpbits(SDState *sd, uint64_t addr)
{
uint32_t i, wpnum;
uint32_t ret = 0;
SDRequest req)
{
uint32_t rca = 0x0000;
+ uint64_t addr = (sd->ocr & (1 << 30)) ? (uint64_t) req.arg << 9 : req.arg;
if (sd_cmd_type[req.cmd] == sd_ac || sd_cmd_type[req.cmd] == sd_adtc)
rca = req.arg >> 16;
}
break;
+ case 5: /* CMD5: reserved for SDIO cards */
+ sd->card_status |= ILLEGAL_COMMAND;
+ return sd_r0;
+
case 6: /* CMD6: SWITCH_FUNCTION */
if (sd->spi)
goto bad_cmd;
break;
sd->state = sd_sendingdata_state;
memcpy(sd->data, sd->csd, 16);
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
return sd_r1;
break;
sd->state = sd_sendingdata_state;
memcpy(sd->data, sd->cid, 16);
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
return sd_r1;
switch (sd->state) {
case sd_transfer_state:
sd->state = sd_sendingdata_state;
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
if (sd->data_start + sd->blk_len > sd->size)
switch (sd->state) {
case sd_transfer_state:
sd->state = sd_sendingdata_state;
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
if (sd->data_start + sd->blk_len > sd->size)
if (sd->spi)
break;
sd->state = sd_receivingdata_state;
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
sd->blk_written = 0;
if (sd->spi)
break;
sd->state = sd_receivingdata_state;
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
sd->blk_written = 0;
case 28: /* CMD28: SET_WRITE_PROT */
switch (sd->state) {
case sd_transfer_state:
- if (req.arg >= sd->size) {
+ if (addr >= sd->size) {
sd->card_status = ADDRESS_ERROR;
return sd_r1b;
}
sd->state = sd_programming_state;
- sd->wp_groups[req.arg >> (HWBLOCK_SHIFT +
+ sd->wp_groups[addr >> (HWBLOCK_SHIFT +
SECTOR_SHIFT + WPGROUP_SHIFT)] = 1;
/* Bzzzzzzztt .... Operation complete. */
sd->state = sd_transfer_state;
case 29: /* CMD29: CLR_WRITE_PROT */
switch (sd->state) {
case sd_transfer_state:
- if (req.arg >= sd->size) {
+ if (addr >= sd->size) {
sd->card_status = ADDRESS_ERROR;
return sd_r1b;
}
sd->state = sd_programming_state;
- sd->wp_groups[req.arg >> (HWBLOCK_SHIFT +
+ sd->wp_groups[addr >> (HWBLOCK_SHIFT +
SECTOR_SHIFT + WPGROUP_SHIFT)] = 0;
/* Bzzzzzzztt .... Operation complete. */
sd->state = sd_transfer_state;
case sd_transfer_state:
sd->state = sd_sendingdata_state;
*(uint32_t *) sd->data = sd_wpbits(sd, req.arg);
- sd->data_start = req.arg;
+ sd->data_start = addr;
sd->data_offset = 0;
return sd_r1b;
}
break;
+ case 52:
+ case 53:
+ /* CMD52, CMD53: reserved for SDIO cards
+ * (see the SDIO Simplified Specification V2.0)
+ * Handle as illegal command but do not complain
+ * on stderr, as some OSes may use these in their
+ * probing for presence of an SDIO card.
+ */
+ sd->card_status |= ILLEGAL_COMMAND;
+ return sd_r0;
+
/* Application specific commands (Class 8) */
case 55: /* CMD55: APP_CMD */
if (sd->rca != rca)
}
static sd_rsp_type_t sd_app_command(SDState *sd,
- SDRequest req) {
- uint32_t rca;
-
- if (sd_cmd_type[req.cmd] == sd_ac || sd_cmd_type[req.cmd] == sd_adtc)
- rca = req.arg >> 16;
-
+ SDRequest req)
+{
DPRINTF("ACMD%d 0x%08x\n", req.cmd, req.arg);
switch (req.cmd) {
case 6: /* ACMD6: SET_BUS_WIDTH */
case 13: /* ACMD13: SD_STATUS */
switch (sd->state) {
case sd_transfer_state:
+ sd->state = sd_sendingdata_state;
sd->data_start = 0;
sd->data_offset = 0;
return sd_r1;
case sd_transfer_state:
*(uint32_t *) sd->data = sd->blk_written;
+ sd->state = sd_sendingdata_state;
sd->data_start = 0;
sd->data_offset = 0;
return sd_r1;
return rsplen;
}
-/* No real need for 64 bit addresses here */
-static void sd_blk_read(SDState *sd, uint32_t addr, uint32_t len)
+static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len)
{
- uint32_t end = addr + len;
+ uint64_t end = addr + len;
+ DPRINTF("sd_blk_read: addr = 0x%08llx, len = %d\n",
+ (unsigned long long) addr, len);
if (!sd->bdrv || bdrv_read(sd->bdrv, addr >> 9, sd->buf, 1) == -1) {
fprintf(stderr, "sd_blk_read: read error on host side\n");
return;
memcpy(sd->data, sd->buf + (addr & 511), len);
}
-static void sd_blk_write(SDState *sd, uint32_t addr, uint32_t len)
+static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len)
{
- uint32_t end = addr + len;
+ uint64_t end = addr + len;
if ((addr & 511) || len < 512)
if (!sd->bdrv || bdrv_read(sd->bdrv, addr >> 9, sd->buf, 1) == -1) {
{
/* TODO: Append CRCs */
uint8_t ret;
+ int io_len;
if (!sd->bdrv || !bdrv_is_inserted(sd->bdrv) || !sd->enable)
return 0x00;
if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION))
return 0x00;
+ io_len = (sd->ocr & (1 << 30)) ? 512 : sd->blk_len;
+
switch (sd->current_cmd) {
case 6: /* CMD6: SWITCH_FUNCTION */
ret = sd->data[sd->data_offset ++];
case 11: /* CMD11: READ_DAT_UNTIL_STOP */
if (sd->data_offset == 0)
- BLK_READ_BLOCK(sd->data_start, sd->blk_len);
+ BLK_READ_BLOCK(sd->data_start, io_len);
ret = sd->data[sd->data_offset ++];
- if (sd->data_offset >= sd->blk_len) {
- sd->data_start += sd->blk_len;
+ if (sd->data_offset >= io_len) {
+ sd->data_start += io_len;
sd->data_offset = 0;
- if (sd->data_start + sd->blk_len > sd->size) {
+ if (sd->data_start + io_len > sd->size) {
sd->card_status |= ADDRESS_ERROR;
break;
}
case 17: /* CMD17: READ_SINGLE_BLOCK */
if (sd->data_offset == 0)
- BLK_READ_BLOCK(sd->data_start, sd->blk_len);
+ BLK_READ_BLOCK(sd->data_start, io_len);
ret = sd->data[sd->data_offset ++];
- if (sd->data_offset >= sd->blk_len)
+ if (sd->data_offset >= io_len)
sd->state = sd_transfer_state;
break;
case 18: /* CMD18: READ_MULTIPLE_BLOCK */
if (sd->data_offset == 0)
- BLK_READ_BLOCK(sd->data_start, sd->blk_len);
+ BLK_READ_BLOCK(sd->data_start, io_len);
ret = sd->data[sd->data_offset ++];
- if (sd->data_offset >= sd->blk_len) {
- sd->data_start += sd->blk_len;
+ if (sd->data_offset >= io_len) {
+ sd->data_start += io_len;
sd->data_offset = 0;
- if (sd->data_start + sd->blk_len > sd->size) {
+ if (sd->data_start + io_len > sd->size) {
sd->card_status |= ADDRESS_ERROR;
break;
}
projects / qemu.git / blobdiff