#include "isa.h"
#include "pc.h"
#include "qemu-timer.h"
+#include "sysemu.h"
//#define DEBUG_SERIAL
#define RECV_FIFO 1
#define MAX_XMIT_RETRY 4
-struct SerialFIFO {
+typedef struct SerialFIFO {
uint8_t data[UART_FIFO_LENGTH];
uint8_t count;
uint8_t itl; /* Interrupt Trigger Level */
uint8_t tail;
uint8_t head;
-} typedef SerialFIFO;
+} SerialFIFO;
struct SerialState {
uint16_t divider;
uint8_t msr; /* read only */
uint8_t scr;
uint8_t fcr;
+ uint8_t fcr_vmstate; /* we can't write directly this value
+ it has side effects */
/* NOTE: this hidden state is necessary for tx irq generation as
it can be reset while reading iir */
int thr_ipending;
struct QEMUTimer *modem_status_poll;
};
+typedef struct ISASerialState {
+ ISADevice dev;
+ uint32_t index;
+ uint32_t iobase;
+ uint32_t isairq;
+ SerialState state;
+} ISASerialState;
+
static void serial_receive1(void *opaque, const uint8_t *buf, int size);
static void fifo_clear(SerialState *s, int fifo)
{
SerialFIFO *f = (fifo) ? &s->recv_fifo : &s->xmit_fifo;
- f->data[f->head++] = chr;
+ /* Receive overruns do not overwrite FIFO contents. */
+ if (fifo == XMIT_FIFO || f->count < UART_FIFO_LENGTH) {
+
+ f->data[f->head++] = chr;
+
+ if (f->head == UART_FIFO_LENGTH)
+ f->head = 0;
+ }
- if (f->head == UART_FIFO_LENGTH)
- f->head = 0;
- f->count++;
+ if (f->count < UART_FIFO_LENGTH)
+ f->count++;
+ else if (fifo == RECV_FIFO)
+ s->lsr |= UART_LSR_OE;
return 1;
}
* this is not in the specification but is observed on existing
* hardware. */
tmp_iir = UART_IIR_CTI;
- } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR)) {
- if (!(s->fcr & UART_FCR_FE)) {
- tmp_iir = UART_IIR_RDI;
- } else if (s->recv_fifo.count >= s->recv_fifo.itl) {
- tmp_iir = UART_IIR_RDI;
- }
+ } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) &&
+ (!(s->fcr & UART_FCR_FE) ||
+ s->recv_fifo.count >= s->recv_fifo.itl)) {
+ tmp_iir = UART_IIR_RDI;
} else if ((s->ier & UART_IER_THRI) && s->thr_ipending) {
tmp_iir = UART_IIR_THRI;
} else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) {
if (s->divider == 0)
return;
+ /* Start bit. */
frame_size = 1;
if (s->lcr & 0x08) {
+ /* Parity bit. */
+ frame_size++;
if (s->lcr & 0x10)
parity = 'E';
else
parity = 'O';
} else {
parity = 'N';
- frame_size = 0;
}
if (s->lcr & 0x04)
stop_bits = 2;
ssp.parity = parity;
ssp.data_bits = data_bits;
ssp.stop_bits = stop_bits;
- s->char_transmit_time = (ticks_per_sec / speed) * frame_size;
+ s->char_transmit_time = (get_ticks_per_sec() / speed) * frame_size;
qemu_chr_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
#if 0
printf("speed=%d parity=%c data=%d stop=%d\n",
We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */
if (s->poll_msl)
- qemu_mod_timer(s->modem_status_poll, qemu_get_clock(vm_clock) + ticks_per_sec / 100);
+ qemu_mod_timer(s->modem_status_poll, qemu_get_clock(vm_clock) + get_ticks_per_sec() / 100);
}
static void serial_xmit(void *opaque)
} else {
s->thr = (uint8_t) val;
if(s->fcr & UART_FCR_FE) {
- fifo_put(s, XMIT_FIFO, s->thr);
- s->thr_ipending = 0;
- s->lsr &= ~UART_LSR_TEMT;
- s->lsr &= ~UART_LSR_THRE;
- serial_update_irq(s);
+ fifo_put(s, XMIT_FIFO, s->thr);
+ s->thr_ipending = 0;
+ s->lsr &= ~UART_LSR_TEMT;
+ s->lsr &= ~UART_LSR_THRE;
+ serial_update_irq(s);
} else {
- s->thr_ipending = 0;
- s->lsr &= ~UART_LSR_THRE;
- serial_update_irq(s);
+ s->thr_ipending = 0;
+ s->lsr &= ~UART_LSR_THRE;
+ serial_update_irq(s);
}
serial_xmit(s);
}
break;
case 2:
ret = s->iir;
+ if ((ret & UART_IIR_ID) == UART_IIR_THRI) {
s->thr_ipending = 0;
- serial_update_irq(s);
+ serial_update_irq(s);
+ }
break;
case 3:
ret = s->lcr;
break;
case 5:
ret = s->lsr;
- /* Clear break interrupt */
- if (s->lsr & UART_LSR_BI) {
- s->lsr &= ~UART_LSR_BI;
+ /* Clear break and overrun interrupts */
+ if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) {
+ s->lsr &= ~(UART_LSR_BI|UART_LSR_OE);
serial_update_irq(s);
}
break;
/* call the timeout receive callback in 4 char transmit time */
qemu_mod_timer(s->fifo_timeout_timer, qemu_get_clock (vm_clock) + s->char_transmit_time * 4);
} else {
+ if (s->lsr & UART_LSR_DR)
+ s->lsr |= UART_LSR_OE;
s->rbr = buf[0];
s->lsr |= UART_LSR_DR;
}
serial_receive_break(s);
}
-static void serial_save(QEMUFile *f, void *opaque)
+static void serial_pre_save(void *opaque)
{
SerialState *s = opaque;
-
- qemu_put_be16s(f,&s->divider);
- qemu_put_8s(f,&s->rbr);
- qemu_put_8s(f,&s->ier);
- qemu_put_8s(f,&s->iir);
- qemu_put_8s(f,&s->lcr);
- qemu_put_8s(f,&s->mcr);
- qemu_put_8s(f,&s->lsr);
- qemu_put_8s(f,&s->msr);
- qemu_put_8s(f,&s->scr);
- qemu_put_8s(f,&s->fcr);
+ s->fcr_vmstate = s->fcr;
}
-static int serial_load(QEMUFile *f, void *opaque, int version_id)
+static int serial_post_load(void *opaque, int version_id)
{
SerialState *s = opaque;
- uint8_t fcr = 0;
-
- if(version_id > 3)
- return -EINVAL;
-
- if (version_id >= 2)
- qemu_get_be16s(f, &s->divider);
- else
- s->divider = qemu_get_byte(f);
- qemu_get_8s(f,&s->rbr);
- qemu_get_8s(f,&s->ier);
- qemu_get_8s(f,&s->iir);
- qemu_get_8s(f,&s->lcr);
- qemu_get_8s(f,&s->mcr);
- qemu_get_8s(f,&s->lsr);
- qemu_get_8s(f,&s->msr);
- qemu_get_8s(f,&s->scr);
-
- if (version_id >= 3)
- qemu_get_8s(f,&fcr);
+ if (version_id < 3) {
+ s->fcr_vmstate = 0;
+ }
/* Initialize fcr via setter to perform essential side-effects */
- serial_ioport_write(s, 0x02, fcr);
+ serial_ioport_write(s, 0x02, s->fcr_vmstate);
return 0;
}
+static const VMStateDescription vmstate_serial = {
+ .name = "serial",
+ .version_id = 3,
+ .minimum_version_id = 2,
+ .pre_save = serial_pre_save,
+ .post_load = serial_post_load,
+ .fields = (VMStateField []) {
+ VMSTATE_UINT16_V(divider, SerialState, 2),
+ VMSTATE_UINT8(rbr, SerialState),
+ VMSTATE_UINT8(ier, SerialState),
+ VMSTATE_UINT8(iir, SerialState),
+ VMSTATE_UINT8(lcr, SerialState),
+ VMSTATE_UINT8(mcr, SerialState),
+ VMSTATE_UINT8(lsr, SerialState),
+ VMSTATE_UINT8(msr, SerialState),
+ VMSTATE_UINT8(scr, SerialState),
+ VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
static void serial_reset(void *opaque)
{
SerialState *s = opaque;
s->lcr = 0;
s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;
- /* Default to 9600 baud, no parity, one stop bit */
+ /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */
s->divider = 0x0C;
s->mcr = UART_MCR_OUT2;
s->scr = 0;
s->tsr_retry = 0;
- s->char_transmit_time = (ticks_per_sec / 9600) * 9;
+ s->char_transmit_time = (get_ticks_per_sec() / 9600) * 10;
s->poll_msl = 0;
fifo_clear(s,RECV_FIFO);
qemu_irq_lower(s->irq);
}
-static void serial_init_core(SerialState *s, qemu_irq irq, int baudbase,
- CharDriverState *chr)
+static void serial_init_core(SerialState *s)
{
- s->irq = irq;
- s->baudbase = baudbase;
- s->chr = chr ?: qemu_chr_open("null", "null", NULL);
+ if (!s->chr) {
+ fprintf(stderr, "Can't create serial device, empty char device\n");
+ exit(1);
+ }
s->modem_status_poll = qemu_new_timer(vm_clock, (QEMUTimerCB *) serial_update_msl, s);
s->transmit_timer = qemu_new_timer(vm_clock, (QEMUTimerCB *) serial_xmit, s);
qemu_register_reset(serial_reset, s);
- serial_reset(s);
qemu_chr_add_handlers(s->chr, serial_can_receive1, serial_receive1,
serial_event, s);
}
-/* If fd is zero, it means that the serial device uses the console */
+/* Change the main reference oscillator frequency. */
+void serial_set_frequency(SerialState *s, uint32_t frequency)
+{
+ s->baudbase = frequency;
+ serial_update_parameters(s);
+}
+
+static const int isa_serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
+static const int isa_serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
+
+static int serial_isa_initfn(ISADevice *dev)
+{
+ static int index;
+ ISASerialState *isa = DO_UPCAST(ISASerialState, dev, dev);
+ SerialState *s = &isa->state;
+
+ if (isa->index == -1)
+ isa->index = index;
+ if (isa->index >= MAX_SERIAL_PORTS)
+ return -1;
+ if (isa->iobase == -1)
+ isa->iobase = isa_serial_io[isa->index];
+ if (isa->isairq == -1)
+ isa->isairq = isa_serial_irq[isa->index];
+ index++;
+
+ s->baudbase = 115200;
+ isa_init_irq(dev, &s->irq, isa->isairq);
+ serial_init_core(s);
+ qdev_set_legacy_instance_id(&dev->qdev, isa->iobase, 3);
+
+ register_ioport_write(isa->iobase, 8, 1, serial_ioport_write, s);
+ register_ioport_read(isa->iobase, 8, 1, serial_ioport_read, s);
+ return 0;
+}
+
+SerialState *serial_isa_init(int index, CharDriverState *chr)
+{
+ ISADevice *dev;
+
+ dev = isa_create("isa-serial");
+ qdev_prop_set_uint32(&dev->qdev, "index", index);
+ qdev_prop_set_chr(&dev->qdev, "chardev", chr);
+ if (qdev_init(&dev->qdev) < 0)
+ return NULL;
+ return &DO_UPCAST(ISASerialState, dev, dev)->state;
+}
+
+static const VMStateDescription vmstate_isa_serial = {
+ .name = "serial",
+ .version_id = 3,
+ .minimum_version_id = 2,
+ .fields = (VMStateField []) {
+ VMSTATE_STRUCT(state, ISASerialState, 0, vmstate_serial, SerialState),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
SerialState *serial_init(int base, qemu_irq irq, int baudbase,
CharDriverState *chr)
{
s = qemu_mallocz(sizeof(SerialState));
- serial_init_core(s, irq, baudbase, chr);
+ s->irq = irq;
+ s->baudbase = baudbase;
+ s->chr = chr;
+ serial_init_core(s);
- register_savevm("serial", base, 3, serial_save, serial_load, s);
+ vmstate_register(NULL, base, &vmstate_serial, s);
register_ioport_write(base, 8, 1, serial_ioport_write, s);
register_ioport_read(base, 8, 1, serial_ioport_read, s);
serial_ioport_write(s, addr >> s->it_shift, value & 0xFF);
}
-static uint32_t serial_mm_readw(void *opaque, target_phys_addr_t addr)
+static uint32_t serial_mm_readw_be(void *opaque, target_phys_addr_t addr)
{
SerialState *s = opaque;
uint32_t val;
val = serial_ioport_read(s, addr >> s->it_shift) & 0xFFFF;
-#ifdef TARGET_WORDS_BIGENDIAN
val = bswap16(val);
-#endif
return val;
}
-static void serial_mm_writew(void *opaque, target_phys_addr_t addr,
- uint32_t value)
+static uint32_t serial_mm_readw_le(void *opaque, target_phys_addr_t addr)
{
SerialState *s = opaque;
-#ifdef TARGET_WORDS_BIGENDIAN
+ uint32_t val;
+
+ val = serial_ioport_read(s, addr >> s->it_shift) & 0xFFFF;
+ return val;
+}
+
+static void serial_mm_writew_be(void *opaque, target_phys_addr_t addr,
+ uint32_t value)
+{
+ SerialState *s = opaque;
+
value = bswap16(value);
-#endif
serial_ioport_write(s, addr >> s->it_shift, value & 0xFFFF);
}
-static uint32_t serial_mm_readl(void *opaque, target_phys_addr_t addr)
+static void serial_mm_writew_le(void *opaque, target_phys_addr_t addr,
+ uint32_t value)
+{
+ SerialState *s = opaque;
+
+ serial_ioport_write(s, addr >> s->it_shift, value & 0xFFFF);
+}
+
+static uint32_t serial_mm_readl_be(void *opaque, target_phys_addr_t addr)
{
SerialState *s = opaque;
uint32_t val;
val = serial_ioport_read(s, addr >> s->it_shift);
-#ifdef TARGET_WORDS_BIGENDIAN
val = bswap32(val);
-#endif
return val;
}
-static void serial_mm_writel(void *opaque, target_phys_addr_t addr,
- uint32_t value)
+static uint32_t serial_mm_readl_le(void *opaque, target_phys_addr_t addr)
{
SerialState *s = opaque;
-#ifdef TARGET_WORDS_BIGENDIAN
+ uint32_t val;
+
+ val = serial_ioport_read(s, addr >> s->it_shift);
+ return val;
+}
+
+static void serial_mm_writel_be(void *opaque, target_phys_addr_t addr,
+ uint32_t value)
+{
+ SerialState *s = opaque;
+
value = bswap32(value);
-#endif
serial_ioport_write(s, addr >> s->it_shift, value);
}
-static CPUReadMemoryFunc * const serial_mm_read[] = {
+static void serial_mm_writel_le(void *opaque, target_phys_addr_t addr,
+ uint32_t value)
+{
+ SerialState *s = opaque;
+
+ serial_ioport_write(s, addr >> s->it_shift, value);
+}
+
+static CPUReadMemoryFunc * const serial_mm_read_be[] = {
+ &serial_mm_readb,
+ &serial_mm_readw_be,
+ &serial_mm_readl_be,
+};
+
+static CPUWriteMemoryFunc * const serial_mm_write_be[] = {
+ &serial_mm_writeb,
+ &serial_mm_writew_be,
+ &serial_mm_writel_be,
+};
+
+static CPUReadMemoryFunc * const serial_mm_read_le[] = {
&serial_mm_readb,
- &serial_mm_readw,
- &serial_mm_readl,
+ &serial_mm_readw_le,
+ &serial_mm_readl_le,
};
-static CPUWriteMemoryFunc * const serial_mm_write[] = {
+static CPUWriteMemoryFunc * const serial_mm_write_le[] = {
&serial_mm_writeb,
- &serial_mm_writew,
- &serial_mm_writel,
+ &serial_mm_writew_le,
+ &serial_mm_writel_le,
};
SerialState *serial_mm_init (target_phys_addr_t base, int it_shift,
qemu_irq irq, int baudbase,
- CharDriverState *chr, int ioregister)
+ CharDriverState *chr, int ioregister,
+ int be)
{
SerialState *s;
int s_io_memory;
s = qemu_mallocz(sizeof(SerialState));
s->it_shift = it_shift;
+ s->irq = irq;
+ s->baudbase = baudbase;
+ s->chr = chr;
- serial_init_core(s, irq, baudbase, chr);
- register_savevm("serial", base, 3, serial_save, serial_load, s);
+ serial_init_core(s);
+ vmstate_register(NULL, base, &vmstate_serial, s);
if (ioregister) {
- s_io_memory = cpu_register_io_memory(serial_mm_read,
- serial_mm_write, s);
+ if (be) {
+ s_io_memory = cpu_register_io_memory(serial_mm_read_be,
+ serial_mm_write_be, s);
+ } else {
+ s_io_memory = cpu_register_io_memory(serial_mm_read_le,
+ serial_mm_write_le, s);
+ }
cpu_register_physical_memory(base, 8 << it_shift, s_io_memory);
}
serial_update_msl(s);
return s;
}
+
+static ISADeviceInfo serial_isa_info = {
+ .qdev.name = "isa-serial",
+ .qdev.size = sizeof(ISASerialState),
+ .qdev.vmsd = &vmstate_isa_serial,
+ .init = serial_isa_initfn,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("index", ISASerialState, index, -1),
+ DEFINE_PROP_HEX32("iobase", ISASerialState, iobase, -1),
+ DEFINE_PROP_UINT32("irq", ISASerialState, isairq, -1),
+ DEFINE_PROP_CHR("chardev", ISASerialState, state.chr),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+};
+
+static void serial_register_devices(void)
+{
+ isa_qdev_register(&serial_isa_info);
+}
+
+device_init(serial_register_devices)
projects / qemu.git / blobdiff