* This code is licensed under the GNU GPL v2.
*/
-#include "vl.h"
+#include "hw.h"
+#include "pxa.h"
+#include "arm-misc.h"
+#include "sysemu.h"
+#include "pcmcia.h"
+#include "i2c.h"
+#include "flash.h"
+#include "qemu-timer.h"
+#include "devices.h"
+#include "sharpsl.h"
+#include "console.h"
+#include "block.h"
+#include "audio/audio.h"
+#include "boards.h"
-#define spitz_printf(format, ...) \
- fprintf(stderr, "%s: " format, __FUNCTION__, ##__VA_ARGS__)
#undef REG_FMT
+#if TARGET_PHYS_ADDR_BITS == 32
+#define REG_FMT "0x%02x"
+#else
#define REG_FMT "0x%02lx"
+#endif
/* Spitz Flash */
#define FLASH_BASE 0x0c000000
#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
struct sl_nand_s {
- target_phys_addr_t target_base;
struct nand_flash_s *nand;
uint8_t ctl;
struct ecc_state_s ecc;
{
struct sl_nand_s *s = (struct sl_nand_s *) opaque;
int ryby;
- addr -= s->target_base;
switch (addr) {
#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
return ecc_digest(&s->ecc, nand_getio(s->nand));
default:
- spitz_printf("Bad register offset " REG_FMT "\n", addr);
+ zaurus_printf("Bad register offset " REG_FMT "\n", addr);
}
return 0;
}
+static uint32_t sl_readl(void *opaque, target_phys_addr_t addr)
+{
+ struct sl_nand_s *s = (struct sl_nand_s *) opaque;
+
+ if (addr == FLASH_FLASHIO)
+ return ecc_digest(&s->ecc, nand_getio(s->nand)) |
+ (ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);
+
+ return sl_readb(opaque, addr);
+}
+
static void sl_writeb(void *opaque, target_phys_addr_t addr,
uint32_t value)
{
struct sl_nand_s *s = (struct sl_nand_s *) opaque;
- addr -= s->target_base;
switch (addr) {
case FLASH_ECCCLRR:
break;
default:
- spitz_printf("Bad register offset " REG_FMT "\n", addr);
+ zaurus_printf("Bad register offset " REG_FMT "\n", addr);
}
}
+static void sl_save(QEMUFile *f, void *opaque)
+{
+ struct sl_nand_s *s = (struct sl_nand_s *) opaque;
+
+ qemu_put_8s(f, &s->ctl);
+ ecc_put(f, &s->ecc);
+}
+
+static int sl_load(QEMUFile *f, void *opaque, int version_id)
+{
+ struct sl_nand_s *s = (struct sl_nand_s *) opaque;
+
+ qemu_get_8s(f, &s->ctl);
+ ecc_get(f, &s->ecc);
+
+ return 0;
+}
+
enum {
FLASH_128M,
FLASH_1024M,
CPUReadMemoryFunc *sl_readfn[] = {
sl_readb,
sl_readb,
- sl_readb,
+ sl_readl,
};
CPUWriteMemoryFunc *sl_writefn[] = {
sl_writeb,
};
s = (struct sl_nand_s *) qemu_mallocz(sizeof(struct sl_nand_s));
- s->target_base = FLASH_BASE;
s->ctl = 0;
if (size == FLASH_128M)
s->nand = nand_init(NAND_MFR_SAMSUNG, 0x73);
iomemtype = cpu_register_io_memory(0, sl_readfn,
sl_writefn, s);
- cpu_register_physical_memory(s->target_base, 0x40, iomemtype);
+ cpu_register_physical_memory(FLASH_BASE, 0x40, iomemtype);
+
+ register_savevm("sl_flash", 0, 0, sl_save, sl_load, s);
}
/* Spitz Keyboard */
{ 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 },
{ 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 },
{ 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 },
- { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x3d },
- { 0x37, 0x38, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 },
+ { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 },
+ { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 },
{ 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 },
};
static int spitz_gpio_invert[5] = { 0, 0, 0, 0, 0, };
struct spitz_keyboard_s {
- struct pxa2xx_state_s *cpu;
+ qemu_irq sense[SPITZ_KEY_SENSE_NUM];
+ qemu_irq *strobe;
+ qemu_irq gpiomap[5];
int keymap[0x80];
uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
uint16_t strobe_state;
if (strobe) {
sense |= 1 << i;
if (!(s->sense_state & (1 << i)))
- pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 1);
+ qemu_irq_raise(s->sense[i]);
} else if (s->sense_state & (1 << i))
- pxa2xx_gpio_set(s->cpu->gpio, spitz_gpio_key_sense[i], 0);
+ qemu_irq_lower(s->sense[i]);
}
s->sense_state = sense;
}
-static void spitz_keyboard_strobe(int line, int level,
- struct spitz_keyboard_s *s)
+static void spitz_keyboard_strobe(void *opaque, int line, int level)
{
- int i;
- for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
- if (spitz_gpio_key_strobe[i] == line) {
- if (level)
- s->strobe_state |= 1 << i;
- else
- s->strobe_state &= ~(1 << i);
-
- spitz_keyboard_sense_update(s);
- break;
- }
+ struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
+
+ if (level)
+ s->strobe_state |= 1 << line;
+ else
+ s->strobe_state &= ~(1 << line);
+ spitz_keyboard_sense_update(s);
}
static void spitz_keyboard_keydown(struct spitz_keyboard_s *s, int keycode)
/* Handle the additional keys */
if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
- pxa2xx_gpio_set(s->cpu->gpio, spitz_gpiomap[spitz_keycode & 0xf],
- (keycode < 0x80) ^
+ qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80) ^
spitz_gpio_invert[spitz_keycode & 0xf]);
return;
}
s->pre_map[0x0d | SHIFT ] = 0x13 | FN; /* plus */
s->pre_map[0x1a ] = 0x14 | FN; /* bracketleft */
s->pre_map[0x1b ] = 0x15 | FN; /* bracketright */
+ s->pre_map[0x1a | SHIFT ] = 0x16 | FN; /* braceleft */
+ s->pre_map[0x1b | SHIFT ] = 0x17 | FN; /* braceright */
s->pre_map[0x27 ] = 0x22 | FN; /* semicolon */
s->pre_map[0x27 | SHIFT ] = 0x23 | FN; /* colon */
s->pre_map[0x09 | SHIFT ] = 0x24 | FN; /* asterisk */
s->pre_map[0x2b ] = 0x25 | FN; /* backslash */
s->pre_map[0x2b | SHIFT ] = 0x26 | FN; /* bar */
s->pre_map[0x0c | SHIFT ] = 0x30 | FN; /* underscore */
+ s->pre_map[0x33 | SHIFT ] = 0x33 | FN; /* less */
s->pre_map[0x35 ] = 0x33 | SHIFT; /* slash */
+ s->pre_map[0x34 | SHIFT ] = 0x34 | FN; /* greater */
s->pre_map[0x35 | SHIFT ] = 0x34 | SHIFT; /* question */
s->pre_map[0x49 ] = 0x48 | FN; /* Page_Up */
s->pre_map[0x51 ] = 0x50 | FN; /* Page_Down */
#undef CTRL
#undef FN
+static void spitz_keyboard_save(QEMUFile *f, void *opaque)
+{
+ struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
+ int i;
+
+ qemu_put_be16s(f, &s->sense_state);
+ qemu_put_be16s(f, &s->strobe_state);
+ for (i = 0; i < 5; i ++)
+ qemu_put_byte(f, spitz_gpio_invert[i]);
+}
+
+static int spitz_keyboard_load(QEMUFile *f, void *opaque, int version_id)
+{
+ struct spitz_keyboard_s *s = (struct spitz_keyboard_s *) opaque;
+ int i;
+
+ qemu_get_be16s(f, &s->sense_state);
+ qemu_get_be16s(f, &s->strobe_state);
+ for (i = 0; i < 5; i ++)
+ spitz_gpio_invert[i] = qemu_get_byte(f);
+
+ /* Release all pressed keys */
+ memset(s->keyrow, 0, sizeof(s->keyrow));
+ spitz_keyboard_sense_update(s);
+ s->modifiers = 0;
+ s->imodifiers = 0;
+ s->fifopos = 0;
+ s->fifolen = 0;
+
+ return 0;
+}
+
static void spitz_keyboard_register(struct pxa2xx_state_s *cpu)
{
int i, j;
s = (struct spitz_keyboard_s *)
qemu_mallocz(sizeof(struct spitz_keyboard_s));
memset(s, 0, sizeof(struct spitz_keyboard_s));
- s->cpu = cpu;
for (i = 0; i < 0x80; i ++)
s->keymap[i] = -1;
if (spitz_keymap[i][j] != -1)
s->keymap[spitz_keymap[i][j]] = (i << 4) | j;
+ for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)
+ s->sense[i] = pxa2xx_gpio_in_get(cpu->gpio)[spitz_gpio_key_sense[i]];
+
+ for (i = 0; i < 5; i ++)
+ s->gpiomap[i] = pxa2xx_gpio_in_get(cpu->gpio)[spitz_gpiomap[i]];
+
+ s->strobe = qemu_allocate_irqs(spitz_keyboard_strobe, s,
+ SPITZ_KEY_STROBE_NUM);
for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
- pxa2xx_gpio_handler_set(cpu->gpio, spitz_gpio_key_strobe[i],
- (gpio_handler_t) spitz_keyboard_strobe, s);
+ pxa2xx_gpio_out_set(cpu->gpio, spitz_gpio_key_strobe[i], s->strobe[i]);
spitz_keyboard_pre_map(s);
qemu_add_kbd_event_handler((QEMUPutKBDEvent *) spitz_keyboard_handler, s);
-}
-
-/* SCOOP devices */
-
-struct scoop_info_s {
- target_phys_addr_t target_base;
- uint16_t status;
- uint16_t power;
- uint32_t gpio_level;
- uint32_t gpio_dir;
- uint32_t prev_level;
- struct {
- gpio_handler_t fn;
- void *opaque;
- } handler[16];
-
- uint16_t mcr;
- uint16_t cdr;
- uint16_t ccr;
- uint16_t irr;
- uint16_t imr;
- uint16_t isr;
- uint16_t gprr;
-};
-
-#define SCOOP_MCR 0x00
-#define SCOOP_CDR 0x04
-#define SCOOP_CSR 0x08
-#define SCOOP_CPR 0x0c
-#define SCOOP_CCR 0x10
-#define SCOOP_IRR_IRM 0x14
-#define SCOOP_IMR 0x18
-#define SCOOP_ISR 0x1c
-#define SCOOP_GPCR 0x20
-#define SCOOP_GPWR 0x24
-#define SCOOP_GPRR 0x28
-
-static inline void scoop_gpio_handler_update(struct scoop_info_s *s) {
- uint32_t level, diff;
- int bit;
- level = s->gpio_level & s->gpio_dir;
-
- for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
- bit = ffs(diff) - 1;
- if (s->handler[bit].fn)
- s->handler[bit].fn(bit, (level >> bit) & 1,
- s->handler[bit].opaque);
- }
-
- s->prev_level = level;
-}
-
-static uint32_t scoop_readb(void *opaque, target_phys_addr_t addr)
-{
- struct scoop_info_s *s = (struct scoop_info_s *) opaque;
- addr -= s->target_base;
-
- switch (addr) {
- case SCOOP_MCR:
- return s->mcr;
- case SCOOP_CDR:
- return s->cdr;
- case SCOOP_CSR:
- return s->status;
- case SCOOP_CPR:
- return s->power;
- case SCOOP_CCR:
- return s->ccr;
- case SCOOP_IRR_IRM:
- return s->irr;
- case SCOOP_IMR:
- return s->imr;
- case SCOOP_ISR:
- return s->isr;
- case SCOOP_GPCR:
- return s->gpio_dir;
- case SCOOP_GPWR:
- return s->gpio_level;
- case SCOOP_GPRR:
- return s->gprr;
- default:
- spitz_printf("Bad register offset " REG_FMT "\n", addr);
- }
- return 0;
-}
-
-static void scoop_writeb(void *opaque, target_phys_addr_t addr, uint32_t value)
-{
- struct scoop_info_s *s = (struct scoop_info_s *) opaque;
- addr -= s->target_base;
- value &= 0xffff;
-
- switch (addr) {
- case SCOOP_MCR:
- s->mcr = value;
- break;
- case SCOOP_CDR:
- s->cdr = value;
- break;
- case SCOOP_CPR:
- s->power = value;
- if (value & 0x80)
- s->power |= 0x8040;
- break;
- case SCOOP_CCR:
- s->ccr = value;
- break;
- case SCOOP_IRR_IRM:
- s->irr = value;
- break;
- case SCOOP_IMR:
- s->imr = value;
- break;
- case SCOOP_ISR:
- s->isr = value;
- break;
- case SCOOP_GPCR:
- s->gpio_dir = value;
- scoop_gpio_handler_update(s);
- break;
- case SCOOP_GPWR:
- s->gpio_level = value & s->gpio_dir;
- scoop_gpio_handler_update(s);
- break;
- case SCOOP_GPRR:
- s->gprr = value;
- break;
- default:
- spitz_printf("Bad register offset " REG_FMT "\n", addr);
- }
-}
-
-CPUReadMemoryFunc *scoop_readfn[] = {
- scoop_readb,
- scoop_readb,
- scoop_readb,
-};
-CPUWriteMemoryFunc *scoop_writefn[] = {
- scoop_writeb,
- scoop_writeb,
- scoop_writeb,
-};
-
-static inline void scoop_gpio_set(struct scoop_info_s *s, int line, int level)
-{
- if (line >= 16) {
- spitz_printf("No GPIO pin %i\n", line);
- return;
- }
-
- if (level)
- s->gpio_level |= (1 << line);
- else
- s->gpio_level &= ~(1 << line);
-}
-
-static inline void scoop_gpio_handler_set(struct scoop_info_s *s, int line,
- gpio_handler_t handler, void *opaque) {
- if (line >= 16) {
- spitz_printf("No GPIO pin %i\n", line);
- return;
- }
-
- s->handler[line].fn = handler;
- s->handler[line].opaque = opaque;
-}
-
-static struct scoop_info_s *spitz_scoop_init(struct pxa2xx_state_s *cpu,
- int count) {
- int iomemtype;
- struct scoop_info_s *s;
-
- s = (struct scoop_info_s *)
- qemu_mallocz(sizeof(struct scoop_info_s) * 2);
- memset(s, 0, sizeof(struct scoop_info_s) * count);
- s[0].target_base = 0x10800000;
- s[1].target_base = 0x08800040;
-
- /* Ready */
- s[0].status = 0x02;
- s[1].status = 0x02;
-
- iomemtype = cpu_register_io_memory(0, scoop_readfn,
- scoop_writefn, &s[0]);
- cpu_register_physical_memory(s[0].target_base, 0xfff, iomemtype);
-
- if (count < 2)
- return s;
-
- iomemtype = cpu_register_io_memory(0, scoop_readfn,
- scoop_writefn, &s[1]);
- cpu_register_physical_memory(s[1].target_base, 0xfff, iomemtype);
-
- return s;
+ register_savevm("spitz_keyboard", 0, 0,
+ spitz_keyboard_save, spitz_keyboard_load, s);
}
/* LCD backlight controller */
static void spitz_bl_update(struct pxa2xx_state_s *s)
{
if (bl_power && bl_intensity)
- spitz_printf("LCD Backlight now at %i/63\n", bl_intensity);
+ zaurus_printf("LCD Backlight now at %i/63\n", bl_intensity);
else
- spitz_printf("LCD Backlight now off\n");
+ zaurus_printf("LCD Backlight now off\n");
}
-static void spitz_bl_bit5(int line, int level, void *opaque)
+static inline void spitz_bl_bit5(void *opaque, int line, int level)
{
int prev = bl_intensity;
spitz_bl_update((struct pxa2xx_state_s *) opaque);
}
-static void spitz_bl_power(int line, int level, void *opaque)
+static inline void spitz_bl_power(void *opaque, int line, int level)
{
bl_power = !!level;
spitz_bl_update((struct pxa2xx_state_s *) opaque);
switch (addr) {
case LCDTG_RESCTL:
if (value)
- spitz_printf("LCD in QVGA mode\n");
+ zaurus_printf("LCD in QVGA mode\n");
else
- spitz_printf("LCD in VGA mode\n");
+ zaurus_printf("LCD in VGA mode\n");
break;
case LCDTG_DUTYCTRL:
max111x_write(max1111, value);
}
-static void corgi_ssp_gpio_cs(int line, int level, struct pxa2xx_state_s *s)
+static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
{
- if (line == SPITZ_GPIO_LCDCON_CS)
+ switch (line) {
+ case 0:
lcd_en = !level;
- else if (line == SPITZ_GPIO_ADS7846_CS)
+ break;
+ case 1:
ads_en = !level;
- else if (line == SPITZ_GPIO_MAX1111_CS)
+ break;
+ case 2:
max_en = !level;
+ break;
+ }
}
#define MAX1111_BATT_VOLT 1
#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
-static void spitz_adc_temp_on(int line, int level, void *opaque)
+static void spitz_adc_temp_on(void *opaque, int line, int level)
{
if (!max1111)
return;
max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
}
-static void spitz_pendown_set(void *opaque, int line, int level)
+static void spitz_ssp_save(QEMUFile *f, void *opaque)
{
- struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_TP_INT, level);
+ qemu_put_be32(f, lcd_en);
+ qemu_put_be32(f, ads_en);
+ qemu_put_be32(f, max_en);
+ qemu_put_be32(f, bl_intensity);
+ qemu_put_be32(f, bl_power);
+}
+
+static int spitz_ssp_load(QEMUFile *f, void *opaque, int version_id)
+{
+ lcd_en = qemu_get_be32(f);
+ ads_en = qemu_get_be32(f);
+ max_en = qemu_get_be32(f);
+ bl_intensity = qemu_get_be32(f);
+ bl_power = qemu_get_be32(f);
+
+ return 0;
}
static void spitz_ssp_attach(struct pxa2xx_state_s *cpu)
{
+ qemu_irq *chipselects;
+
lcd_en = ads_en = max_en = 0;
- ads7846 = ads7846_init(qemu_allocate_irqs(spitz_pendown_set, cpu, 1)[0]);
+ ads7846 = ads7846_init(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_TP_INT]);
max1111 = max1111_init(0);
max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);
pxa2xx_ssp_attach(cpu->ssp[CORGI_SSP_PORT - 1], corgi_ssp_read,
corgi_ssp_write, cpu);
- pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_LCDCON_CS,
- (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
- pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ADS7846_CS,
- (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
- pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_MAX1111_CS,
- (gpio_handler_t) corgi_ssp_gpio_cs, cpu);
+ chipselects = qemu_allocate_irqs(corgi_ssp_gpio_cs, cpu, 3);
+ pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_LCDCON_CS, chipselects[0]);
+ pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_ADS7846_CS, chipselects[1]);
+ pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_MAX1111_CS, chipselects[2]);
bl_intensity = 0x20;
bl_power = 0;
+
+ register_savevm("spitz_ssp", 0, 0, spitz_ssp_save, spitz_ssp_load, cpu);
}
/* CF Microdrive */
-static void spitz_microdrive_attach(struct pxa2xx_state_s *cpu)
+static void spitz_microdrive_attach(struct pxa2xx_state_s *cpu, int slot)
{
struct pcmcia_card_s *md;
- BlockDriverState *bs = bs_table[0];
+ int index;
+ BlockDriverState *bs;
- if (bs && bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
+ index = drive_get_index(IF_IDE, 0, 0);
+ if (index == -1)
+ return;
+ bs = drives_table[index].bdrv;
+ if (bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
md = dscm1xxxx_init(bs);
- pxa2xx_pcmcia_attach(cpu->pcmcia[0], md);
+ pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);
}
}
-/* Other peripherals */
+/* Wm8750 and Max7310 on I2C */
+
+#define AKITA_MAX_ADDR 0x18
+#define SPITZ_WM_ADDRL 0x1b
+#define SPITZ_WM_ADDRH 0x1a
+
+#define SPITZ_GPIO_WM 5
-static void spitz_charge_switch(int line, int level, void *opaque)
+#ifdef HAS_AUDIO
+static void spitz_wm8750_addr(void *opaque, int line, int level)
{
- spitz_printf("Charging %s.\n", level ? "off" : "on");
+ i2c_slave *wm = (i2c_slave *) opaque;
+ if (level)
+ i2c_set_slave_address(wm, SPITZ_WM_ADDRH);
+ else
+ i2c_set_slave_address(wm, SPITZ_WM_ADDRL);
}
+#endif
-static void spitz_discharge_switch(int line, int level, void *opaque)
+static void spitz_i2c_setup(struct pxa2xx_state_s *cpu)
{
- spitz_printf("Discharging %s.\n", level ? "on" : "off");
+ /* Attach the CPU on one end of our I2C bus. */
+ i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
+
+#ifdef HAS_AUDIO
+ AudioState *audio;
+ i2c_slave *wm;
+
+ audio = AUD_init();
+ if (!audio)
+ return;
+ /* Attach a WM8750 to the bus */
+ wm = wm8750_init(bus, audio);
+
+ spitz_wm8750_addr(wm, 0, 0);
+ pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_WM,
+ qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]);
+ /* .. and to the sound interface. */
+ cpu->i2s->opaque = wm;
+ cpu->i2s->codec_out = wm8750_dac_dat;
+ cpu->i2s->codec_in = wm8750_adc_dat;
+ wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
+#endif
}
-static void spitz_greenled_switch(int line, int level, void *opaque)
+static void spitz_akita_i2c_setup(struct pxa2xx_state_s *cpu)
{
- spitz_printf("Green LED %s.\n", level ? "on" : "off");
+ /* Attach a Max7310 to Akita I2C bus. */
+ i2c_set_slave_address(max7310_init(pxa2xx_i2c_bus(cpu->i2c[0])),
+ AKITA_MAX_ADDR);
}
-static void spitz_orangeled_switch(int line, int level, void *opaque)
+/* Other peripherals */
+
+static void spitz_out_switch(void *opaque, int line, int level)
{
- spitz_printf("Orange LED %s.\n", level ? "on" : "off");
+ switch (line) {
+ case 0:
+ zaurus_printf("Charging %s.\n", level ? "off" : "on");
+ break;
+ case 1:
+ zaurus_printf("Discharging %s.\n", level ? "on" : "off");
+ break;
+ case 2:
+ zaurus_printf("Green LED %s.\n", level ? "on" : "off");
+ break;
+ case 3:
+ zaurus_printf("Orange LED %s.\n", level ? "on" : "off");
+ break;
+ case 4:
+ spitz_bl_bit5(opaque, line, level);
+ break;
+ case 5:
+ spitz_bl_power(opaque, line, level);
+ break;
+ case 6:
+ spitz_adc_temp_on(opaque, line, level);
+ break;
+ }
}
#define SPITZ_SCP_LED_GREEN 1
#define SPITZ_SCP2_MIC_BIAS 9
static void spitz_scoop_gpio_setup(struct pxa2xx_state_s *cpu,
- struct scoop_info_s *scp, int num)
+ struct scoop_info_s *scp0, struct scoop_info_s *scp1)
{
- scoop_gpio_handler_set(&scp[0], SPITZ_SCP_CHRG_ON,
- spitz_charge_switch, cpu);
- scoop_gpio_handler_set(&scp[0], SPITZ_SCP_JK_B,
- spitz_discharge_switch, cpu);
- scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_GREEN,
- spitz_greenled_switch, cpu);
- scoop_gpio_handler_set(&scp[0], SPITZ_SCP_LED_ORANGE,
- spitz_orangeled_switch, cpu);
-
- if (num >= 2) {
- scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_CONT,
- spitz_bl_bit5, cpu);
- scoop_gpio_handler_set(&scp[1], SPITZ_SCP2_BACKLIGHT_ON,
- spitz_bl_power, cpu);
+ qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8);
+
+ scoop_gpio_out_set(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]);
+ scoop_gpio_out_set(scp0, SPITZ_SCP_JK_B, outsignals[1]);
+ scoop_gpio_out_set(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]);
+ scoop_gpio_out_set(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]);
+
+ if (scp1) {
+ scoop_gpio_out_set(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]);
+ scoop_gpio_out_set(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]);
}
- scoop_gpio_handler_set(&scp[0], SPITZ_SCP_ADC_TEMP_ON,
- spitz_adc_temp_on, cpu);
+ scoop_gpio_out_set(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);
}
#define SPITZ_GPIO_HSYNC 22
#define SPITZ_GPIO_CF2_IRQ 106
#define SPITZ_GPIO_CF2_CD 93
-int spitz_hsync;
+static int spitz_hsync;
-static void spitz_lcd_hsync_handler(void *opaque)
+static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
{
struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_HSYNC, spitz_hsync);
+ qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_HSYNC], spitz_hsync);
spitz_hsync ^= 1;
}
-static void spitz_mmc_coverswitch_change(void *opaque, int in)
-{
- struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_DETECT, in);
-}
-
-static void spitz_mmc_writeprotect_change(void *opaque, int wp)
-{
- struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SD_WP, wp);
-}
-
-static void spitz_pcmcia_cb(void *opaque, int line, int level)
-{
- struct pxa2xx_state_s *cpu = (struct pxa2xx_state_s *) opaque;
- static const int gpio_map[] = {
- SPITZ_GPIO_CF1_IRQ, SPITZ_GPIO_CF1_CD,
- SPITZ_GPIO_CF2_IRQ, SPITZ_GPIO_CF2_CD,
- };
- pxa2xx_gpio_set(cpu->gpio, gpio_map[line], level);
-}
-
static void spitz_gpio_setup(struct pxa2xx_state_s *cpu, int slots)
{
- qemu_irq *pcmcia_cb;
+ qemu_irq lcd_hsync;
/*
* Bad hack: We toggle the LCD hsync GPIO on every GPIO status
* read to satisfy broken guests that poll-wait for hsync.
* wouldn't guarantee that a guest ever exits the loop.
*/
spitz_hsync = 0;
- pxa2xx_gpio_read_notifier(cpu->gpio, spitz_lcd_hsync_handler, cpu);
- pxa2xx_lcd_vsync_cb(cpu->lcd, spitz_lcd_hsync_handler, cpu);
+ lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0];
+ pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);
+ pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);
/* MMC/SD host */
- pxa2xx_mmci_handlers(cpu->mmc, cpu, spitz_mmc_writeprotect_change,
- spitz_mmc_coverswitch_change);
+ pxa2xx_mmci_handlers(cpu->mmc,
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SD_WP],
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SD_DETECT]);
/* Battery lock always closed */
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_BAT_COVER, 1);
+ qemu_irq_raise(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_BAT_COVER]);
/* Handle reset */
- pxa2xx_gpio_handler_set(cpu->gpio, SPITZ_GPIO_ON_RESET, pxa2xx_reset, cpu);
+ pxa2xx_gpio_out_set(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset);
/* PCMCIA signals: card's IRQ and Card-Detect */
- pcmcia_cb = qemu_allocate_irqs(spitz_pcmcia_cb, cpu, slots * 2);
if (slots >= 1)
- pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0], pcmcia_cb[0], pcmcia_cb[1]);
+ pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF1_IRQ],
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF1_CD]);
if (slots >= 2)
- pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1], pcmcia_cb[2], pcmcia_cb[3]);
+ pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF2_IRQ],
+ pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_CF2_CD]);
/* Initialise the screen rotation related signals */
spitz_gpio_invert[3] = 0; /* Always open */
} else { /* Portrait mode */
spitz_gpio_invert[4] = 1;
}
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWA, spitz_gpio_invert[3]);
- pxa2xx_gpio_set(cpu->gpio, SPITZ_GPIO_SWB, spitz_gpio_invert[4]);
+ qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SWA],
+ spitz_gpio_invert[3]);
+ qemu_set_irq(pxa2xx_gpio_in_get(cpu->gpio)[SPITZ_GPIO_SWB],
+ spitz_gpio_invert[4]);
}
-/* Write the bootloader parameters memory area. */
-
-#define MAGIC_CHG(a, b, c, d) ((d << 24) | (c << 16) | (b << 8) | a)
-
-struct __attribute__ ((__packed__)) sl_param_info {
- uint32_t comadj_keyword;
- int32_t comadj;
-
- uint32_t uuid_keyword;
- char uuid[16];
-
- uint32_t touch_keyword;
- int32_t touch_xp;
- int32_t touch_yp;
- int32_t touch_xd;
- int32_t touch_yd;
-
- uint32_t adadj_keyword;
- int32_t adadj;
-
- uint32_t phad_keyword;
- int32_t phadadj;
-} spitz_bootparam = {
- .comadj_keyword = MAGIC_CHG('C', 'M', 'A', 'D'),
- .comadj = 125,
- .uuid_keyword = MAGIC_CHG('U', 'U', 'I', 'D'),
- .uuid = { -1 },
- .touch_keyword = MAGIC_CHG('T', 'U', 'C', 'H'),
- .touch_xp = -1,
- .adadj_keyword = MAGIC_CHG('B', 'V', 'A', 'D'),
- .adadj = -1,
- .phad_keyword = MAGIC_CHG('P', 'H', 'A', 'D'),
- .phadadj = 0x01,
-};
-
-static void sl_bootparam_write(uint32_t ptr)
-{
- memcpy(phys_ram_base + ptr, &spitz_bootparam,
- sizeof(struct sl_param_info));
-}
-
-#define SL_PXA_PARAM_BASE 0xa0000a00
-
/* Board init. */
enum spitz_model_e { spitz, akita, borzoi, terrier };
-static void spitz_common_init(int ram_size, int vga_ram_size,
- DisplayState *ds, const char *kernel_filename,
+#define SPITZ_RAM 0x04000000
+#define SPITZ_ROM 0x00800000
+
+static struct arm_boot_info spitz_binfo = {
+ .loader_start = PXA2XX_SDRAM_BASE,
+ .ram_size = 0x04000000,
+};
+
+static void spitz_common_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *kernel_filename,
const char *kernel_cmdline, const char *initrd_filename,
const char *cpu_model, enum spitz_model_e model, int arm_id)
{
- uint32_t spitz_ram = 0x04000000;
- uint32_t spitz_rom = 0x00800000;
struct pxa2xx_state_s *cpu;
- struct scoop_info_s *scp;
+ struct scoop_info_s *scp0, *scp1 = NULL;
if (!cpu_model)
cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0";
/* Setup CPU & memory */
- if (ram_size < spitz_ram + spitz_rom + PXA2XX_INTERNAL_SIZE) {
+ if (ram_size < SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE) {
fprintf(stderr, "This platform requires %i bytes of memory\n",
- spitz_ram + spitz_rom + PXA2XX_INTERNAL_SIZE);
+ SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE);
exit(1);
}
- cpu = pxa270_init(spitz_ram, ds, cpu_model);
+ cpu = pxa270_init(spitz_binfo.ram_size, cpu_model);
sl_flash_register(cpu, (model == spitz) ? FLASH_128M : FLASH_1024M);
- cpu_register_physical_memory(0, spitz_rom,
- qemu_ram_alloc(spitz_rom) | IO_MEM_ROM);
+ cpu_register_physical_memory(0, SPITZ_ROM,
+ qemu_ram_alloc(SPITZ_ROM) | IO_MEM_ROM);
/* Setup peripherals */
spitz_keyboard_register(cpu);
spitz_ssp_attach(cpu);
- scp = spitz_scoop_init(cpu, (model == akita) ? 1 : 2);
+ scp0 = scoop_init(cpu, 0, 0x10800000);
+ if (model != akita) {
+ scp1 = scoop_init(cpu, 1, 0x08800040);
+ }
- spitz_scoop_gpio_setup(cpu, scp, (model == akita) ? 1 : 2);
+ spitz_scoop_gpio_setup(cpu, scp0, scp1);
spitz_gpio_setup(cpu, (model == akita) ? 1 : 2);
+ spitz_i2c_setup(cpu);
+
+ if (model == akita)
+ spitz_akita_i2c_setup(cpu);
+
if (model == terrier)
- /* A 6.0 GB microdrive is permanently sitting in CF slot 0. */
- spitz_microdrive_attach(cpu);
+ /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */
+ spitz_microdrive_attach(cpu, 1);
else if (model != akita)
/* A 4.0 GB microdrive is permanently sitting in CF slot 0. */
- spitz_microdrive_attach(cpu);
+ spitz_microdrive_attach(cpu, 0);
/* Setup initial (reset) machine state */
- cpu->env->regs[15] = PXA2XX_SDRAM_BASE;
+ cpu->env->regs[15] = spitz_binfo.loader_start;
- arm_load_kernel(cpu->env, spitz_ram, kernel_filename, kernel_cmdline,
- initrd_filename, arm_id, PXA2XX_SDRAM_BASE);
+ spitz_binfo.kernel_filename = kernel_filename;
+ spitz_binfo.kernel_cmdline = kernel_cmdline;
+ spitz_binfo.initrd_filename = initrd_filename;
+ spitz_binfo.board_id = arm_id;
+ arm_load_kernel(cpu->env, &spitz_binfo);
sl_bootparam_write(SL_PXA_PARAM_BASE - PXA2XX_SDRAM_BASE);
}
-static void spitz_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static void spitz_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
- spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
+ spitz_common_init(ram_size, vga_ram_size, kernel_filename,
kernel_cmdline, initrd_filename, cpu_model, spitz, 0x2c9);
}
-static void borzoi_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static void borzoi_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
- spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
+ spitz_common_init(ram_size, vga_ram_size, kernel_filename,
kernel_cmdline, initrd_filename, cpu_model, borzoi, 0x33f);
}
-static void akita_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static void akita_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
- spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
+ spitz_common_init(ram_size, vga_ram_size, kernel_filename,
kernel_cmdline, initrd_filename, cpu_model, akita, 0x2e8);
}
-static void terrier_init(int ram_size, int vga_ram_size, int boot_device,
- DisplayState *ds, const char **fd_filename, int snapshot,
+static void terrier_init(ram_addr_t ram_size, int vga_ram_size,
+ const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
- spitz_common_init(ram_size, vga_ram_size, ds, kernel_filename,
+ spitz_common_init(ram_size, vga_ram_size, kernel_filename,
kernel_cmdline, initrd_filename, cpu_model, terrier, 0x33f);
}
QEMUMachine akitapda_machine = {
- "akita",
- "Akita PDA (PXA270)",
- akita_init,
+ .name = "akita",
+ .desc = "Akita PDA (PXA270)",
+ .init = akita_init,
+ .ram_require = SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE + RAMSIZE_FIXED,
};
QEMUMachine spitzpda_machine = {
- "spitz",
- "Spitz PDA (PXA270)",
- spitz_init,
+ .name = "spitz",
+ .desc = "Spitz PDA (PXA270)",
+ .init = spitz_init,
+ .ram_require = SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE + RAMSIZE_FIXED,
};
QEMUMachine borzoipda_machine = {
- "borzoi",
- "Borzoi PDA (PXA270)",
- borzoi_init,
+ .name = "borzoi",
+ .desc = "Borzoi PDA (PXA270)",
+ .init = borzoi_init,
+ .ram_require = SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE + RAMSIZE_FIXED,
};
QEMUMachine terrierpda_machine = {
- "terrier",
- "Terrier PDA (PXA270)",
- terrier_init,
+ .name = "terrier",
+ .desc = "Terrier PDA (PXA270)",
+ .init = terrier_init,
+ .ram_require = SPITZ_RAM + SPITZ_ROM + PXA2XX_INTERNAL_SIZE + RAMSIZE_FIXED,
};
projects / qemu.git / blobdiff