*/
#include "hw/hw.h"
#include "hw/usb.h"
-#include "hw/pci.h"
-#include "qemu-timer.h"
-#include "iov.h"
-#include "dma.h"
+#include "hw/pci/pci.h"
+#include "qemu/timer.h"
+#include "qemu/iov.h"
+#include "sysemu/dma.h"
#include "trace.h"
+#include "qemu/main-loop.h"
//#define DEBUG
//#define DEBUG_DUMP_DATA
#define FRAME_MAX_LOOPS 256
+/* Must be large enough to handle 10 frame delay for initial isoc requests */
+#define QH_VALID 32
+
+#define MAX_FRAMES_PER_TICK (QH_VALID / 2)
+
#define NB_PORTS 2
enum {
struct UHCIAsync {
USBPacket packet;
- QEMUSGList sgl;
+ uint8_t static_buf[64]; /* 64 bytes is enough, except for isoc packets */
+ uint8_t *buf;
UHCIQueue *queue;
QTAILQ_ENTRY(UHCIAsync) next;
uint32_t td_addr;
/* Interrupts that should be raised at the end of the current frame. */
uint32_t pending_int_mask;
- int irq_pin;
/* Active packets */
QTAILQ_HEAD(, UHCIQueue) queues;
/* Properties */
char *masterbus;
uint32_t firstport;
+ uint32_t maxframes;
};
typedef struct UHCI_TD {
static void uhci_async_cancel(UHCIAsync *async);
static void uhci_queue_fill(UHCIQueue *q, UHCI_TD *td);
+static void uhci_resume(void *opaque);
static inline int32_t uhci_queue_token(UHCI_TD *td)
{
queue->ep = ep;
QTAILQ_INIT(&queue->asyncs);
QTAILQ_INSERT_HEAD(&s->queues, queue, next);
- /* valid needs to be large enough to handle 10 frame delay
- * for initial isochronous requests */
- queue->valid = 32;
+ queue->valid = QH_VALID;
trace_usb_uhci_queue_add(queue->token);
return queue;
}
async = QTAILQ_FIRST(&queue->asyncs);
uhci_async_cancel(async);
}
+ usb_device_ep_stopped(queue->ep->dev, queue->ep);
trace_usb_uhci_queue_del(queue->token, reason);
QTAILQ_REMOVE(&s->queues, queue, next);
async->queue = queue;
async->td_addr = td_addr;
usb_packet_init(&async->packet);
- pci_dma_sglist_init(&async->sgl, &queue->uhci->dev, 1);
trace_usb_uhci_packet_add(async->queue->token, async->td_addr);
return async;
{
trace_usb_uhci_packet_del(async->queue->token, async->td_addr);
usb_packet_cleanup(&async->packet);
- qemu_sglist_destroy(&async->sgl);
+ if (async->buf != async->static_buf) {
+ g_free(async->buf);
+ }
g_free(async);
}
async->done);
if (!async->done)
usb_cancel_packet(&async->packet);
- usb_packet_unmap(&async->packet, &async->sgl);
uhci_async_free(async);
}
} else {
level = 0;
}
- qemu_set_irq(s->dev.irq[s->irq_pin], level);
+ pci_set_irq(&s->dev, level);
}
static void uhci_reset(void *opaque)
UHCIState *s = opaque;
if (version_id < 2) {
- s->expire_time = qemu_get_clock_ns(vm_clock) +
+ s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
(get_ticks_per_sec() / FRAME_TIMER_FREQ);
}
return 0;
static const VMStateDescription vmstate_uhci = {
.name = "uhci",
- .version_id = 2,
+ .version_id = 3,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.post_load = uhci_post_load,
VMSTATE_UINT8(status2, UHCIState),
VMSTATE_TIMER(frame_timer, UHCIState),
VMSTATE_INT64_V(expire_time, UHCIState, 2),
+ VMSTATE_UINT32_V(pending_int_mask, UHCIState, 3),
VMSTATE_END_OF_LIST()
}
};
-static void uhci_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
-{
- UHCIState *s = opaque;
-
- addr &= 0x1f;
- switch(addr) {
- case 0x0c:
- s->sof_timing = val;
- break;
- }
-}
-
-static uint32_t uhci_ioport_readb(void *opaque, uint32_t addr)
+static void uhci_port_write(void *opaque, hwaddr addr,
+ uint64_t val, unsigned size)
{
UHCIState *s = opaque;
- uint32_t val;
- addr &= 0x1f;
- switch(addr) {
- case 0x0c:
- val = s->sof_timing;
- break;
- default:
- val = 0xff;
- break;
- }
- return val;
-}
-
-static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
-{
- UHCIState *s = opaque;
-
- addr &= 0x1f;
trace_usb_uhci_mmio_writew(addr, val);
switch(addr) {
if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
/* start frame processing */
trace_usb_uhci_schedule_start();
- s->expire_time = qemu_get_clock_ns(vm_clock) +
+ s->expire_time = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
(get_ticks_per_sec() / FRAME_TIMER_FREQ);
- qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock));
+ timer_mod(s->frame_timer, s->expire_time);
s->status &= ~UHCI_STS_HCHALTED;
} else if (!(val & UHCI_CMD_RS)) {
s->status |= UHCI_STS_HCHALTED;
return;
}
s->cmd = val;
+ if (val & UHCI_CMD_EGSM) {
+ if ((s->ports[0].ctrl & UHCI_PORT_RD) ||
+ (s->ports[1].ctrl & UHCI_PORT_RD)) {
+ uhci_resume(s);
+ }
+ }
break;
case 0x02:
s->status &= ~val;
if (s->status & UHCI_STS_HCHALTED)
s->frnum = val & 0x7ff;
break;
+ case 0x08:
+ s->fl_base_addr &= 0xffff0000;
+ s->fl_base_addr |= val & ~0xfff;
+ break;
+ case 0x0a:
+ s->fl_base_addr &= 0x0000ffff;
+ s->fl_base_addr |= (val << 16);
+ break;
+ case 0x0c:
+ s->sof_timing = val & 0xff;
+ break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
}
}
-static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
+static uint64_t uhci_port_read(void *opaque, hwaddr addr, unsigned size)
{
UHCIState *s = opaque;
uint32_t val;
- addr &= 0x1f;
switch(addr) {
case 0x00:
val = s->cmd;
case 0x06:
val = s->frnum;
break;
+ case 0x08:
+ val = s->fl_base_addr & 0xffff;
+ break;
+ case 0x0a:
+ val = (s->fl_base_addr >> 16) & 0xffff;
+ break;
+ case 0x0c:
+ val = s->sof_timing;
+ break;
case 0x10 ... 0x1f:
{
UHCIPort *port;
return val;
}
-static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
-{
- UHCIState *s = opaque;
-
- addr &= 0x1f;
- trace_usb_uhci_mmio_writel(addr, val);
-
- switch(addr) {
- case 0x08:
- s->fl_base_addr = val & ~0xfff;
- break;
- }
-}
-
-static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
-{
- UHCIState *s = opaque;
- uint32_t val;
-
- addr &= 0x1f;
- switch(addr) {
- case 0x08:
- val = s->fl_base_addr;
- break;
- default:
- val = 0xffffffff;
- break;
- }
- trace_usb_uhci_mmio_readl(addr, val);
- return val;
-}
-
/* signal resume if controller suspended */
static void uhci_resume (void *opaque)
{
*int_mask |= 0x01;
if (pid == USB_TOKEN_IN) {
+ pci_dma_write(&s->dev, td->buffer, async->buf, len);
if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
*int_mask |= 0x02;
/* short packet: do not update QH */
}
if (q) {
- q->valid = 32;
+ q->valid = QH_VALID;
}
/* Is active ? */
max_len = ((td->token >> 21) + 1) & 0x7ff;
spd = (pid == USB_TOKEN_IN && (td->ctrl & TD_CTRL_SPD) != 0);
- usb_packet_setup(&async->packet, pid, q->ep, td_addr, spd,
+ usb_packet_setup(&async->packet, pid, q->ep, 0, td_addr, spd,
(td->ctrl & TD_CTRL_IOC) != 0);
- qemu_sglist_add(&async->sgl, td->buffer, max_len);
- usb_packet_map(&async->packet, &async->sgl);
+ if (max_len <= sizeof(async->static_buf)) {
+ async->buf = async->static_buf;
+ } else {
+ async->buf = g_malloc(max_len);
+ }
+ usb_packet_addbuf(&async->packet, async->buf, max_len);
switch(pid) {
case USB_TOKEN_OUT:
case USB_TOKEN_SETUP:
+ pci_dma_read(&s->dev, td->buffer, async->buf, max_len);
usb_handle_packet(q->ep->dev, &async->packet);
if (async->packet.status == USB_RET_SUCCESS) {
async->packet.actual_length = max_len;
default:
/* invalid pid : frame interrupted */
- usb_packet_unmap(&async->packet, &async->sgl);
uhci_async_free(async);
s->status |= UHCI_STS_HCPERR;
uhci_update_irq(s);
done:
ret = uhci_complete_td(s, td, async, int_mask);
- usb_packet_unmap(&async->packet, &async->sgl);
uhci_async_free(async);
return ret;
}
static void uhci_frame_timer(void *opaque)
{
UHCIState *s = opaque;
+ uint64_t t_now, t_last_run;
+ int i, frames;
+ const uint64_t frame_t = get_ticks_per_sec() / FRAME_TIMER_FREQ;
- /* prepare the timer for the next frame */
- s->expire_time += (get_ticks_per_sec() / FRAME_TIMER_FREQ);
- s->frame_bytes = 0;
s->completions_only = false;
qemu_bh_cancel(s->bh);
if (!(s->cmd & UHCI_CMD_RS)) {
/* Full stop */
trace_usb_uhci_schedule_stop();
- qemu_del_timer(s->frame_timer);
+ timer_del(s->frame_timer);
uhci_async_cancel_all(s);
/* set hchalted bit in status - UHCI11D 2.1.2 */
s->status |= UHCI_STS_HCHALTED;
return;
}
- /* Complete the previous frame */
+ /* We still store expire_time in our state, for migration */
+ t_last_run = s->expire_time - frame_t;
+ t_now = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+
+ /* Process up to MAX_FRAMES_PER_TICK frames */
+ frames = (t_now - t_last_run) / frame_t;
+ if (frames > s->maxframes) {
+ int skipped = frames - s->maxframes;
+ s->expire_time += skipped * frame_t;
+ s->frnum = (s->frnum + skipped) & 0x7ff;
+ frames -= skipped;
+ }
+ if (frames > MAX_FRAMES_PER_TICK) {
+ frames = MAX_FRAMES_PER_TICK;
+ }
+
+ for (i = 0; i < frames; i++) {
+ s->frame_bytes = 0;
+ trace_usb_uhci_frame_start(s->frnum);
+ uhci_async_validate_begin(s);
+ uhci_process_frame(s);
+ uhci_async_validate_end(s);
+ /* The spec says frnum is the frame currently being processed, and
+ * the guest must look at frnum - 1 on interrupt, so inc frnum now */
+ s->frnum = (s->frnum + 1) & 0x7ff;
+ s->expire_time += frame_t;
+ }
+
+ /* Complete the previous frame(s) */
if (s->pending_int_mask) {
s->status2 |= s->pending_int_mask;
s->status |= UHCI_STS_USBINT;
}
s->pending_int_mask = 0;
- /* Start new frame */
- s->frnum = (s->frnum + 1) & 0x7ff;
-
- trace_usb_uhci_frame_start(s->frnum);
-
- uhci_async_validate_begin(s);
-
- uhci_process_frame(s);
-
- uhci_async_validate_end(s);
-
- qemu_mod_timer(s->frame_timer, s->expire_time);
+ timer_mod(s->frame_timer, t_now + frame_t);
}
-static const MemoryRegionPortio uhci_portio[] = {
- { 0, 32, 2, .write = uhci_ioport_writew, },
- { 0, 32, 2, .read = uhci_ioport_readw, },
- { 0, 32, 4, .write = uhci_ioport_writel, },
- { 0, 32, 4, .read = uhci_ioport_readl, },
- { 0, 32, 1, .write = uhci_ioport_writeb, },
- { 0, 32, 1, .read = uhci_ioport_readb, },
- PORTIO_END_OF_LIST()
-};
-
static const MemoryRegionOps uhci_ioport_ops = {
- .old_portio = uhci_portio,
+ .read = uhci_port_read,
+ .write = uhci_port_write,
+ .valid.min_access_size = 1,
+ .valid.max_access_size = 4,
+ .impl.min_access_size = 2,
+ .impl.max_access_size = 2,
+ .endianness = DEVICE_LITTLE_ENDIAN,
};
static USBPortOps uhci_port_ops = {
/* TODO: reset value should be 0. */
pci_conf[USB_SBRN] = USB_RELEASE_1; // release number
- s->irq_pin = u->info.irq_pin;
- pci_config_set_interrupt_pin(pci_conf, s->irq_pin + 1);
+ pci_config_set_interrupt_pin(pci_conf, u->info.irq_pin + 1);
if (s->masterbus) {
USBPort *ports[NB_PORTS];
return -1;
}
} else {
- usb_bus_new(&s->bus, &uhci_bus_ops, &s->dev.qdev);
+ usb_bus_new(&s->bus, sizeof(s->bus), &uhci_bus_ops, DEVICE(dev));
for (i = 0; i < NB_PORTS; i++) {
usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops,
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
}
}
s->bh = qemu_bh_new(uhci_bh, s);
- s->frame_timer = qemu_new_timer_ns(vm_clock, uhci_frame_timer, s);
+ s->frame_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, uhci_frame_timer, s);
s->num_ports_vmstate = NB_PORTS;
QTAILQ_INIT(&s->queues);
qemu_register_reset(uhci_reset, s);
- memory_region_init_io(&s->io_bar, &uhci_ioport_ops, s, "uhci", 0x20);
+ memory_region_init_io(&s->io_bar, OBJECT(s), &uhci_ioport_ops, s,
+ "uhci", 0x20);
+
/* Use region 4 for consistency with real hardware. BSD guests seem
to rely on this. */
pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
DEFINE_PROP_STRING("masterbus", UHCIState, masterbus),
DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0),
DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
+ DEFINE_PROP_UINT32("maxframes", UHCIState, maxframes, 128),
DEFINE_PROP_END_OF_LIST(),
};
k->no_hotplug = 1;
dc->vmsd = &vmstate_uhci;
dc->props = uhci_properties;
+ set_bit(DEVICE_CATEGORY_USB, dc->categories);
u->info = *info;
}
projects / qemu.git / blobdiff