.str = desc_strings,
};
-static const uint8_t qemu_hub_dev_descriptor[] = {
- 0x12, /* u8 bLength; */
- 0x01, /* u8 bDescriptorType; Device */
- 0x10, 0x01, /* u16 bcdUSB; v1.1 */
-
- 0x09, /* u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* u8 bDeviceSubClass; */
- 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* u8 bMaxPacketSize0; 8 Bytes */
-
- 0x00, 0x00, /* u16 idVendor; */
- 0x00, 0x00, /* u16 idProduct; */
- 0x01, 0x01, /* u16 bcdDevice */
-
- 0x03, /* u8 iManufacturer; */
- 0x02, /* u8 iProduct; */
- 0x01, /* u8 iSerialNumber; */
- 0x01 /* u8 bNumConfigurations; */
-};
-
-/* XXX: patch interrupt size */
-static const uint8_t qemu_hub_config_descriptor[] = {
-
- /* one configuration */
- 0x09, /* u8 bLength; */
- 0x02, /* u8 bDescriptorType; Configuration */
- 0x19, 0x00, /* u16 wTotalLength; */
- 0x01, /* u8 bNumInterfaces; (1) */
- 0x01, /* u8 bConfigurationValue; */
- 0x00, /* u8 iConfiguration; */
- 0xe0, /* u8 bmAttributes;
- Bit 7: must be set,
- 6: Self-powered,
- 5: Remote wakeup,
- 4..0: resvd */
- 0x00, /* u8 MaxPower; */
-
- /* USB 1.1:
- * USB 2.0, single TT organization (mandatory):
- * one interface, protocol 0
- *
- * USB 2.0, multiple TT organization (optional):
- * two interfaces, protocols 1 (like single TT)
- * and 2 (multiple TT mode) ... config is
- * sometimes settable
- * NOT IMPLEMENTED
- */
-
- /* one interface */
- 0x09, /* u8 if_bLength; */
- 0x04, /* u8 if_bDescriptorType; Interface */
- 0x00, /* u8 if_bInterfaceNumber; */
- 0x00, /* u8 if_bAlternateSetting; */
- 0x01, /* u8 if_bNumEndpoints; */
- 0x09, /* u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* u8 if_bInterfaceSubClass; */
- 0x00, /* u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
- 0x00, /* u8 if_iInterface; */
-
- /* one endpoint (status change endpoint) */
- 0x07, /* u8 ep_bLength; */
- 0x05, /* u8 ep_bDescriptorType; Endpoint */
- 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
- 0xff /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */
-};
-
static const uint8_t qemu_hub_hub_descriptor[] =
{
0x00, /* u8 bLength; patched in later */
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
+ /* Let upstream know the device on this port is gone */
+ s->dev.port->ops->child_detach(s->dev.port, port1->dev);
+
port->wPortStatus &= ~PORT_STAT_CONNECTION;
port->wPortChange |= PORT_STAT_C_CONNECTION;
if (port->wPortStatus & PORT_STAT_ENABLE) {
}
}
-static void usb_hub_wakeup(USBDevice *dev)
+static void usb_hub_child_detach(USBPort *port1, USBDevice *child)
{
- USBHubState *s = dev->port->opaque;
- USBHubPort *port = &s->ports[dev->port->index];
+ USBHubState *s = port1->opaque;
+
+ /* Pass along upstream */
+ s->dev.port->ops->child_detach(s->dev.port, child);
+}
+
+static void usb_hub_wakeup(USBPort *port1)
+{
+ USBHubState *s = port1->opaque;
+ USBHubPort *port = &s->ports[port1->index];
if (port->wPortStatus & PORT_STAT_SUSPEND) {
port->wPortChange |= PORT_STAT_C_SUSPEND;
}
}
-static void usb_hub_complete(USBDevice *dev, USBPacket *packet)
+static void usb_hub_complete(USBPort *port, USBPacket *packet)
{
- USBHubState *s = dev->port->opaque;
+ USBHubState *s = port->opaque;
/*
* Just pass it along upstream for now.
*
- * If we ever inplement usb 2.0 split transactions this will
+ * If we ever implement usb 2.0 split transactions this will
* become a little more complicated ...
+ *
+ * Can't use usb_packet_complete() here because packet->owner is
+ * cleared already, go call the ->complete() callback directly
+ * instead.
*/
- usb_packet_complete(&s->dev, packet);
-}
-
-static void usb_hub_handle_attach(USBDevice *dev)
-{
- USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
- int i;
-
- for (i = 0; i < NUM_PORTS; i++) {
- usb_port_location(&s->ports[i].port, dev->port, i+1);
- }
+ s->dev.port->ops->complete(s->dev.port, packet);
}
static void usb_hub_handle_reset(USBDevice *dev)
/* XXX: do it */
}
-static int usb_hub_handle_control(USBDevice *dev, int request, int value,
- int index, int length, uint8_t *data)
+static int usb_hub_handle_control(USBDevice *dev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
{
USBHubState *s = (USBHubState *)dev;
int ret;
- ret = usb_desc_handle_control(dev, request, value, index, length, data);
+ ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
if (ret >= 0) {
return ret;
}
port->wPortStatus |= PORT_STAT_SUSPEND;
break;
case PORT_RESET:
- if (dev) {
+ if (dev && dev->attached) {
usb_send_msg(dev, USB_MSG_RESET);
port->wPortChange |= PORT_STAT_C_RESET;
/* set enable bit */
if (p->devep == 1) {
USBHubPort *port;
unsigned int status;
+ uint8_t buf[4];
int i, n;
n = (NUM_PORTS + 1 + 7) / 8;
- if (p->len == 1) { /* FreeBSD workaround */
+ if (p->iov.size == 1) { /* FreeBSD workaround */
n = 1;
- } else if (n > p->len) {
+ } else if (n > p->iov.size) {
return USB_RET_BABBLE;
}
status = 0;
}
if (status != 0) {
for(i = 0; i < n; i++) {
- p->data[i] = status >> (8 * i);
+ buf[i] = status >> (8 * i);
}
+ usb_packet_copy(p, buf, n);
ret = n;
} else {
ret = USB_RET_NAK; /* usb11 11.13.1 */
for(i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
dev = port->port.dev;
- if (dev && (port->wPortStatus & PORT_STAT_ENABLE)) {
- ret = dev->info->handle_packet(dev, p);
+ if (dev && dev->attached && (port->wPortStatus & PORT_STAT_ENABLE)) {
+ ret = usb_handle_packet(dev, p);
if (ret != USB_RET_NODEV) {
return ret;
}
static USBPortOps usb_hub_port_ops = {
.attach = usb_hub_attach,
.detach = usb_hub_detach,
+ .child_detach = usb_hub_child_detach,
.wakeup = usb_hub_wakeup,
.complete = usb_hub_complete,
};
usb_register_port(usb_bus_from_device(dev),
&port->port, s, i, &usb_hub_port_ops,
USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
+ usb_port_location(&port->port, dev->port, i+1);
port->wPortStatus = PORT_STAT_POWER;
port->wPortChange = 0;
}
.usb_desc = &desc_hub,
.init = usb_hub_initfn,
.handle_packet = usb_hub_handle_packet,
- .handle_attach = usb_hub_handle_attach,
.handle_reset = usb_hub_handle_reset,
.handle_control = usb_hub_handle_control,
.handle_data = usb_hub_handle_data,
projects / qemu.git / blobdiff