*/
#include "qemu-common.h"
#include "usb.h"
+#include "usb-desc.h"
//#define DEBUG
-#define MAX_PORTS 8
+#define NUM_PORTS 8
typedef struct USBHubPort {
USBPort port;
typedef struct USBHubState {
USBDevice dev;
- int nb_ports;
- USBHubPort ports[MAX_PORTS];
+ USBHubPort ports[NUM_PORTS];
} USBHubState;
#define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE)
/* same as Linux kernel root hubs */
-static const uint8_t qemu_hub_dev_descriptor[] = {
- 0x12, /* u8 bLength; */
- 0x01, /* u8 bDescriptorType; Device */
- 0x10, 0x01, /* u16 bcdUSB; v1.1 */
+enum {
+ STR_MANUFACTURER = 1,
+ STR_PRODUCT,
+ STR_SERIALNUMBER,
+};
- 0x09, /* u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* u8 bDeviceSubClass; */
- 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
- 0x08, /* u8 bMaxPacketSize0; 8 Bytes */
+static const USBDescStrings desc_strings = {
+ [STR_MANUFACTURER] = "QEMU " QEMU_VERSION,
+ [STR_PRODUCT] = "QEMU USB Hub",
+ [STR_SERIALNUMBER] = "314159",
+};
- 0x00, 0x00, /* u16 idVendor; */
- 0x00, 0x00, /* u16 idProduct; */
- 0x01, 0x01, /* u16 bcdDevice */
+static const USBDescIface desc_iface_hub = {
+ .bInterfaceNumber = 0,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .eps = (USBDescEndpoint[]) {
+ {
+ .bEndpointAddress = USB_DIR_IN | 0x01,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = 1 + (NUM_PORTS + 7) / 8,
+ .bInterval = 0xff,
+ },
+ }
+};
- 0x03, /* u8 iManufacturer; */
- 0x02, /* u8 iProduct; */
- 0x01, /* u8 iSerialNumber; */
- 0x01 /* u8 bNumConfigurations; */
+static const USBDescDevice desc_device_hub = {
+ .bcdUSB = 0x0110,
+ .bDeviceClass = USB_CLASS_HUB,
+ .bMaxPacketSize0 = 8,
+ .bNumConfigurations = 1,
+ .confs = (USBDescConfig[]) {
+ {
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .bmAttributes = 0xe0,
+ .nif = 1,
+ .ifs = &desc_iface_hub,
+ },
+ },
};
-/* XXX: patch interrupt size */
-static const uint8_t qemu_hub_config_descriptor[] = {
-
- /* one configuration */
- 0x09, /* u8 bLength; */
- 0x02, /* u8 bDescriptorType; Configuration */
- 0x19, 0x00, /* u16 wTotalLength; */
- 0x01, /* u8 bNumInterfaces; (1) */
- 0x01, /* u8 bConfigurationValue; */
- 0x00, /* u8 iConfiguration; */
- 0xc0, /* u8 bmAttributes;
- Bit 7: must be set,
- 6: Self-powered,
- 5: Remote wakeup,
- 4..0: resvd */
- 0x00, /* u8 MaxPower; */
-
- /* USB 1.1:
- * USB 2.0, single TT organization (mandatory):
- * one interface, protocol 0
- *
- * USB 2.0, multiple TT organization (optional):
- * two interfaces, protocols 1 (like single TT)
- * and 2 (multiple TT mode) ... config is
- * sometimes settable
- * NOT IMPLEMENTED
- */
-
- /* one interface */
- 0x09, /* u8 if_bLength; */
- 0x04, /* u8 if_bDescriptorType; Interface */
- 0x00, /* u8 if_bInterfaceNumber; */
- 0x00, /* u8 if_bAlternateSetting; */
- 0x01, /* u8 if_bNumEndpoints; */
- 0x09, /* u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* u8 if_bInterfaceSubClass; */
- 0x00, /* u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
- 0x00, /* u8 if_iInterface; */
-
- /* one endpoint (status change endpoint) */
- 0x07, /* u8 ep_bLength; */
- 0x05, /* u8 ep_bDescriptorType; Endpoint */
- 0x81, /* u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* u8 ep_bmAttributes; Interrupt */
- 0x02, 0x00, /* u16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
- 0xff /* u8 ep_bInterval; (255ms -- usb 2.0 spec) */
+static const USBDesc desc_hub = {
+ .id = {
+ .idVendor = 0,
+ .idProduct = 0,
+ .bcdDevice = 0x0101,
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIALNUMBER,
+ },
+ .full = &desc_device_hub,
+ .str = desc_strings,
};
static const uint8_t qemu_hub_hub_descriptor[] =
/* DeviceRemovable and PortPwrCtrlMask patched in later */
};
-static void usb_hub_attach(USBPort *port1, USBDevice *dev)
+static void usb_hub_attach(USBPort *port1)
{
USBHubState *s = port1->opaque;
USBHubPort *port = &s->ports[port1->index];
- if (dev) {
- if (port->port.dev)
- usb_attach(port1, NULL);
-
- port->wPortStatus |= PORT_STAT_CONNECTION;
- port->wPortChange |= PORT_STAT_C_CONNECTION;
- if (dev->speed == USB_SPEED_LOW)
- port->wPortStatus |= PORT_STAT_LOW_SPEED;
- else
- port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
- port->port.dev = dev;
- /* send the attach message */
- usb_send_msg(dev, USB_MSG_ATTACH);
+ port->wPortStatus |= PORT_STAT_CONNECTION;
+ port->wPortChange |= PORT_STAT_C_CONNECTION;
+ if (port->port.dev->speed == USB_SPEED_LOW) {
+ port->wPortStatus |= PORT_STAT_LOW_SPEED;
} else {
- dev = port->port.dev;
- if (dev) {
- port->wPortStatus &= ~PORT_STAT_CONNECTION;
- port->wPortChange |= PORT_STAT_C_CONNECTION;
- if (port->wPortStatus & PORT_STAT_ENABLE) {
- port->wPortStatus &= ~PORT_STAT_ENABLE;
- port->wPortChange |= PORT_STAT_C_ENABLE;
- }
- /* send the detach message */
- usb_send_msg(dev, USB_MSG_DETACH);
- port->port.dev = NULL;
- }
+ port->wPortStatus &= ~PORT_STAT_LOW_SPEED;
+ }
+}
+
+static void usb_hub_detach(USBPort *port1)
+{
+ USBHubState *s = port1->opaque;
+ USBHubPort *port = &s->ports[port1->index];
+
+ /* Let upstream know the device on this port is gone */
+ s->dev.port->ops->child_detach(s->dev.port, port1->dev);
+
+ port->wPortStatus &= ~PORT_STAT_CONNECTION;
+ port->wPortChange |= PORT_STAT_C_CONNECTION;
+ if (port->wPortStatus & PORT_STAT_ENABLE) {
+ port->wPortStatus &= ~PORT_STAT_ENABLE;
+ port->wPortChange |= PORT_STAT_C_ENABLE;
+ }
+}
+
+static void usb_hub_child_detach(USBPort *port1, USBDevice *child)
+{
+ USBHubState *s = port1->opaque;
+
+ /* Pass along upstream */
+ s->dev.port->ops->child_detach(s->dev.port, child);
+}
+
+static void usb_hub_wakeup(USBPort *port1)
+{
+ USBHubState *s = port1->opaque;
+ USBHubPort *port = &s->ports[port1->index];
+
+ if (port->wPortStatus & PORT_STAT_SUSPEND) {
+ port->wPortChange |= PORT_STAT_C_SUSPEND;
+ usb_wakeup(&s->dev);
+ }
+}
+
+static void usb_hub_complete(USBPort *port, USBPacket *packet)
+{
+ USBHubState *s = port->opaque;
+
+ /*
+ * Just pass it along upstream for now.
+ *
+ * If we ever inplement usb 2.0 split transactions this will
+ * become a little more complicated ...
+ */
+ usb_packet_complete(&s->dev, packet);
+}
+
+static void usb_hub_handle_attach(USBDevice *dev)
+{
+ USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
+ int i;
+
+ for (i = 0; i < NUM_PORTS; i++) {
+ usb_port_location(&s->ports[i].port, dev->port, i+1);
}
}
/* XXX: do it */
}
-static int usb_hub_handle_control(USBDevice *dev, int request, int value,
- int index, int length, uint8_t *data)
+static int usb_hub_handle_control(USBDevice *dev, USBPacket *p,
+ int request, int value, int index, int length, uint8_t *data)
{
USBHubState *s = (USBHubState *)dev;
int ret;
+ ret = usb_desc_handle_control(dev, p, request, value, index, length, data);
+ if (ret >= 0) {
+ return ret;
+ }
+
switch(request) {
- case DeviceRequest | USB_REQ_GET_STATUS:
- data[0] = (1 << USB_DEVICE_SELF_POWERED) |
- (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
- data[1] = 0x00;
- ret = 2;
- break;
- case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
- if (value == USB_DEVICE_REMOTE_WAKEUP) {
- dev->remote_wakeup = 0;
- } else {
- goto fail;
- }
- ret = 0;
- break;
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
if (value == 0 && index != 0x81) { /* clear ep halt */
goto fail;
}
ret = 0;
break;
- case DeviceOutRequest | USB_REQ_SET_FEATURE:
- if (value == USB_DEVICE_REMOTE_WAKEUP) {
- dev->remote_wakeup = 1;
- } else {
- goto fail;
- }
- ret = 0;
- break;
- case DeviceOutRequest | USB_REQ_SET_ADDRESS:
- dev->addr = value;
- ret = 0;
- break;
- case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
- switch(value >> 8) {
- case USB_DT_DEVICE:
- memcpy(data, qemu_hub_dev_descriptor,
- sizeof(qemu_hub_dev_descriptor));
- ret = sizeof(qemu_hub_dev_descriptor);
- break;
- case USB_DT_CONFIG:
- memcpy(data, qemu_hub_config_descriptor,
- sizeof(qemu_hub_config_descriptor));
-
- /* status change endpoint size based on number
- * of ports */
- data[22] = (s->nb_ports + 1 + 7) / 8;
-
- ret = sizeof(qemu_hub_config_descriptor);
- break;
- case USB_DT_STRING:
- switch(value & 0xff) {
- case 0:
- /* language ids */
- data[0] = 4;
- data[1] = 3;
- data[2] = 0x09;
- data[3] = 0x04;
- ret = 4;
- break;
- case 1:
- /* serial number */
- ret = set_usb_string(data, "314159");
- break;
- case 2:
- /* product description */
- ret = set_usb_string(data, "QEMU USB Hub");
- break;
- case 3:
- /* vendor description */
- ret = set_usb_string(data, "QEMU " QEMU_VERSION);
- break;
- default:
- goto fail;
- }
- break;
- default:
- goto fail;
- }
- break;
- case DeviceRequest | USB_REQ_GET_CONFIGURATION:
- data[0] = 1;
- ret = 1;
- break;
- case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
- ret = 0;
- break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
data[0] = 0;
ret = 1;
{
unsigned int n = index - 1;
USBHubPort *port;
- if (n >= s->nb_ports)
+ if (n >= NUM_PORTS) {
goto fail;
+ }
port = &s->ports[n];
data[0] = port->wPortStatus;
data[1] = port->wPortStatus >> 8;
unsigned int n = index - 1;
USBHubPort *port;
USBDevice *dev;
- if (n >= s->nb_ports)
+ if (n >= NUM_PORTS) {
goto fail;
+ }
port = &s->ports[n];
dev = port->port.dev;
switch(value) {
{
unsigned int n = index - 1;
USBHubPort *port;
- USBDevice *dev;
- if (n >= s->nb_ports)
+
+ if (n >= NUM_PORTS) {
goto fail;
+ }
port = &s->ports[n];
- dev = port->port.dev;
switch(value) {
case PORT_ENABLE:
port->wPortStatus &= ~PORT_STAT_ENABLE;
unsigned int n, limit, var_hub_size = 0;
memcpy(data, qemu_hub_hub_descriptor,
sizeof(qemu_hub_hub_descriptor));
- data[2] = s->nb_ports;
+ data[2] = NUM_PORTS;
/* fill DeviceRemovable bits */
- limit = ((s->nb_ports + 1 + 7) / 8) + 7;
+ limit = ((NUM_PORTS + 1 + 7) / 8) + 7;
for (n = 7; n < limit; n++) {
data[n] = 0x00;
var_hub_size++;
}
/* fill PortPwrCtrlMask bits */
- limit = limit + ((s->nb_ports + 7) / 8);
+ limit = limit + ((NUM_PORTS + 7) / 8);
for (;n < limit; n++) {
data[n] = 0xff;
var_hub_size++;
USBHubPort *port;
unsigned int status;
int i, n;
- n = (s->nb_ports + 1 + 7) / 8;
+ n = (NUM_PORTS + 1 + 7) / 8;
if (p->len == 1) { /* FreeBSD workaround */
n = 1;
} else if (n > p->len) {
return USB_RET_BABBLE;
}
status = 0;
- for(i = 0; i < s->nb_ports; i++) {
+ for(i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
if (port->wPortChange)
status |= (1 << (i + 1));
USBDevice *dev;
int i, ret;
- for(i = 0; i < s->nb_ports; i++) {
+ for(i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
dev = port->port.dev;
if (dev && (port->wPortStatus & PORT_STAT_ENABLE)) {
- ret = dev->handle_packet(dev, p);
+ ret = usb_handle_packet(dev, p);
if (ret != USB_RET_NODEV) {
return ret;
}
static void usb_hub_handle_destroy(USBDevice *dev)
{
USBHubState *s = (USBHubState *)dev;
+ int i;
- qemu_free(s);
+ for (i = 0; i < NUM_PORTS; i++) {
+ usb_unregister_port(usb_bus_from_device(dev),
+ &s->ports[i].port);
+ }
}
-USBDevice *usb_hub_init(int nb_ports)
+static USBPortOps usb_hub_port_ops = {
+ .attach = usb_hub_attach,
+ .detach = usb_hub_detach,
+ .child_detach = usb_hub_child_detach,
+ .wakeup = usb_hub_wakeup,
+ .complete = usb_hub_complete,
+};
+
+static int usb_hub_initfn(USBDevice *dev)
{
- USBHubState *s;
+ USBHubState *s = DO_UPCAST(USBHubState, dev, dev);
USBHubPort *port;
int i;
- if (nb_ports > MAX_PORTS)
- return NULL;
- s = qemu_mallocz(sizeof(USBHubState));
- s->dev.speed = USB_SPEED_FULL;
- s->dev.handle_packet = usb_hub_handle_packet;
-
- /* generic USB device init */
- s->dev.handle_reset = usb_hub_handle_reset;
- s->dev.handle_control = usb_hub_handle_control;
- s->dev.handle_data = usb_hub_handle_data;
- s->dev.handle_destroy = usb_hub_handle_destroy;
-
- pstrcpy(s->dev.devname, sizeof(s->dev.devname), "QEMU USB Hub");
-
- s->nb_ports = nb_ports;
- for(i = 0; i < s->nb_ports; i++) {
+ usb_desc_init(dev);
+ for (i = 0; i < NUM_PORTS; i++) {
port = &s->ports[i];
- qemu_register_usb_port(&port->port, s, i, usb_hub_attach);
+ usb_register_port(usb_bus_from_device(dev),
+ &port->port, s, i, &usb_hub_port_ops,
+ USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
port->wPortStatus = PORT_STAT_POWER;
port->wPortChange = 0;
}
- return (USBDevice *)s;
+ return 0;
+}
+
+static const VMStateDescription vmstate_usb_hub_port = {
+ .name = "usb-hub-port",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_UINT16(wPortStatus, USBHubPort),
+ VMSTATE_UINT16(wPortChange, USBHubPort),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_usb_hub = {
+ .name = "usb-hub",
+ .version_id = 1,
+ .minimum_version_id = 1,
+ .fields = (VMStateField []) {
+ VMSTATE_USB_DEVICE(dev, USBHubState),
+ VMSTATE_STRUCT_ARRAY(ports, USBHubState, NUM_PORTS, 0,
+ vmstate_usb_hub_port, USBHubPort),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static struct USBDeviceInfo hub_info = {
+ .product_desc = "QEMU USB Hub",
+ .qdev.name = "usb-hub",
+ .qdev.fw_name = "hub",
+ .qdev.size = sizeof(USBHubState),
+ .qdev.vmsd = &vmstate_usb_hub,
+ .usb_desc = &desc_hub,
+ .init = usb_hub_initfn,
+ .handle_packet = usb_hub_handle_packet,
+ .handle_attach = usb_hub_handle_attach,
+ .handle_reset = usb_hub_handle_reset,
+ .handle_control = usb_hub_handle_control,
+ .handle_data = usb_hub_handle_data,
+ .handle_destroy = usb_hub_handle_destroy,
+};
+
+static void usb_hub_register_devices(void)
+{
+ usb_qdev_register(&hub_info);
}
+device_init(usb_hub_register_devices)
projects / qemu.git / blobdiff