#include <inttypes.h>
#include "virtio.h"
+#include "virtio-blk.h"
+#include "virtio-net.h"
#include "pci.h"
-#include "sysemu.h"
+#include "qemu-error.h"
#include "msix.h"
#include "net.h"
+#include "loader.h"
+#include "kvm.h"
+#include "blockdev.h"
/* from Linux's linux/virtio_pci.h */
* 12 is historical, and due to x86 page size. */
#define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
+/* Flags track per-device state like workarounds for quirks in older guests. */
+#define VIRTIO_PCI_FLAG_BUS_MASTER_BUG (1 << 0)
+
+/* Performance improves when virtqueue kick processing is decoupled from the
+ * vcpu thread using ioeventfd for some devices. */
+#define VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT 1
+#define VIRTIO_PCI_FLAG_USE_IOEVENTFD (1 << VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT)
+
/* QEMU doesn't strictly need write barriers since everything runs in
* lock-step. We'll leave the calls to wmb() in though to make it obvious for
* KVM or if kqemu gets SMP support.
typedef struct {
PCIDevice pci_dev;
VirtIODevice *vdev;
+ uint32_t flags;
uint32_t addr;
uint32_t class_code;
uint32_t nvectors;
- DriveInfo *dinfo;
+ BlockConf block;
+ NICConf nic;
+ uint32_t host_features;
+#ifdef CONFIG_LINUX
+ V9fsConf fsconf;
+#endif
+ /* Max. number of ports we can have for a the virtio-serial device */
+ uint32_t max_virtserial_ports;
+ virtio_net_conf net;
+ bool ioeventfd_disabled;
+ bool ioeventfd_started;
} VirtIOPCIProxy;
/* virtio device */
if (proxy->vdev->config_vector != VIRTIO_NO_VECTOR) {
return msix_vector_use(&proxy->pci_dev, proxy->vdev->config_vector);
}
+
+ /* Try to find out if the guest has bus master disabled, but is
+ in ready state. Then we have a buggy guest OS. */
+ if ((proxy->vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
+ !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
+ proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
+ }
return 0;
}
return 0;
}
-static void virtio_pci_reset(void *opaque)
+static int virtio_pci_set_host_notifier_internal(VirtIOPCIProxy *proxy,
+ int n, bool assign)
{
- VirtIOPCIProxy *proxy = opaque;
+ VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
+ EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
+ int r;
+ if (assign) {
+ r = event_notifier_init(notifier, 1);
+ if (r < 0) {
+ error_report("%s: unable to init event notifier: %d",
+ __func__, r);
+ return r;
+ }
+ r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
+ proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
+ n, assign);
+ if (r < 0) {
+ error_report("%s: unable to map ioeventfd: %d",
+ __func__, r);
+ event_notifier_cleanup(notifier);
+ }
+ } else {
+ r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
+ proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
+ n, assign);
+ if (r < 0) {
+ error_report("%s: unable to unmap ioeventfd: %d",
+ __func__, r);
+ return r;
+ }
+
+ /* Handle the race condition where the guest kicked and we deassigned
+ * before we got around to handling the kick.
+ */
+ if (event_notifier_test_and_clear(notifier)) {
+ virtio_queue_notify_vq(vq);
+ }
+
+ event_notifier_cleanup(notifier);
+ }
+ return r;
+}
+
+static void virtio_pci_host_notifier_read(void *opaque)
+{
+ VirtQueue *vq = opaque;
+ EventNotifier *n = virtio_queue_get_host_notifier(vq);
+ if (event_notifier_test_and_clear(n)) {
+ virtio_queue_notify_vq(vq);
+ }
+}
+
+static void virtio_pci_set_host_notifier_fd_handler(VirtIOPCIProxy *proxy,
+ int n, bool assign)
+{
+ VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
+ EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
+ if (assign) {
+ qemu_set_fd_handler(event_notifier_get_fd(notifier),
+ virtio_pci_host_notifier_read, NULL, vq);
+ } else {
+ qemu_set_fd_handler(event_notifier_get_fd(notifier),
+ NULL, NULL, NULL);
+ }
+}
+
+static void virtio_pci_start_ioeventfd(VirtIOPCIProxy *proxy)
+{
+ int n, r;
+
+ if (!(proxy->flags & VIRTIO_PCI_FLAG_USE_IOEVENTFD) ||
+ proxy->ioeventfd_disabled ||
+ proxy->ioeventfd_started) {
+ return;
+ }
+
+ for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
+ if (!virtio_queue_get_num(proxy->vdev, n)) {
+ continue;
+ }
+
+ r = virtio_pci_set_host_notifier_internal(proxy, n, true);
+ if (r < 0) {
+ goto assign_error;
+ }
+
+ virtio_pci_set_host_notifier_fd_handler(proxy, n, true);
+ }
+ proxy->ioeventfd_started = true;
+ return;
+
+assign_error:
+ while (--n >= 0) {
+ if (!virtio_queue_get_num(proxy->vdev, n)) {
+ continue;
+ }
+
+ virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
+ r = virtio_pci_set_host_notifier_internal(proxy, n, false);
+ assert(r >= 0);
+ }
+ proxy->ioeventfd_started = false;
+ error_report("%s: failed. Fallback to a userspace (slower).", __func__);
+}
+
+static void virtio_pci_stop_ioeventfd(VirtIOPCIProxy *proxy)
+{
+ int r;
+ int n;
+
+ if (!proxy->ioeventfd_started) {
+ return;
+ }
+
+ for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
+ if (!virtio_queue_get_num(proxy->vdev, n)) {
+ continue;
+ }
+
+ virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
+ r = virtio_pci_set_host_notifier_internal(proxy, n, false);
+ assert(r >= 0);
+ }
+ proxy->ioeventfd_started = false;
+}
+
+static void virtio_pci_reset(DeviceState *d)
+{
+ VirtIOPCIProxy *proxy = container_of(d, VirtIOPCIProxy, pci_dev.qdev);
+ virtio_pci_stop_ioeventfd(proxy);
virtio_reset(proxy->vdev);
msix_reset(&proxy->pci_dev);
+ proxy->flags &= ~VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
}
static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
/* Guest does not negotiate properly? We have to assume nothing. */
if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
if (vdev->bad_features)
- val = vdev->bad_features(vdev);
+ val = proxy->host_features & vdev->bad_features(vdev);
else
val = 0;
}
if (vdev->set_features)
vdev->set_features(vdev, val);
- vdev->features = val;
+ vdev->guest_features = val;
break;
case VIRTIO_PCI_QUEUE_PFN:
pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
- if (pa == 0)
- virtio_pci_reset(proxy);
+ if (pa == 0) {
+ virtio_pci_stop_ioeventfd(proxy);
+ virtio_reset(proxy->vdev);
+ msix_unuse_all_vectors(&proxy->pci_dev);
+ }
else
virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
break;
virtio_queue_notify(vdev, val);
break;
case VIRTIO_PCI_STATUS:
- vdev->status = val & 0xFF;
- if (vdev->status == 0)
- virtio_pci_reset(proxy);
+ if (!(val & VIRTIO_CONFIG_S_DRIVER_OK)) {
+ virtio_pci_stop_ioeventfd(proxy);
+ }
+
+ virtio_set_status(vdev, val & 0xFF);
+
+ if (val & VIRTIO_CONFIG_S_DRIVER_OK) {
+ virtio_pci_start_ioeventfd(proxy);
+ }
+
+ if (vdev->status == 0) {
+ virtio_reset(proxy->vdev);
+ msix_unuse_all_vectors(&proxy->pci_dev);
+ }
+
+ /* Linux before 2.6.34 sets the device as OK without enabling
+ the PCI device bus master bit. In this case we need to disable
+ some safety checks. */
+ if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
+ !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
+ proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
+ }
break;
case VIRTIO_MSI_CONFIG_VECTOR:
msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
virtio_queue_set_vector(vdev, vdev->queue_sel, val);
break;
default:
- fprintf(stderr, "%s: unexpected address 0x%x value 0x%x\n",
- __func__, addr, val);
+ error_report("%s: unexpected address 0x%x value 0x%x",
+ __func__, addr, val);
break;
}
}
switch (addr) {
case VIRTIO_PCI_HOST_FEATURES:
- ret = vdev->get_features(vdev);
- ret |= (1 << VIRTIO_F_NOTIFY_ON_EMPTY);
- ret |= (1 << VIRTIO_RING_F_INDIRECT_DESC);
- ret |= (1 << VIRTIO_F_BAD_FEATURE);
+ ret = proxy->host_features;
break;
case VIRTIO_PCI_GUEST_FEATURES:
- ret = vdev->features;
+ ret = vdev->guest_features;
break;
case VIRTIO_PCI_QUEUE_PFN:
ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
}
static void virtio_map(PCIDevice *pci_dev, int region_num,
- uint32_t addr, uint32_t size, int type)
+ pcibus_t addr, pcibus_t size, int type)
{
VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev);
VirtIODevice *vdev = proxy->vdev;
if (PCI_COMMAND == address) {
if (!(val & PCI_COMMAND_MASTER)) {
- proxy->vdev->status &= !VIRTIO_CONFIG_S_DRIVER_OK;
+ if (!(proxy->flags & VIRTIO_PCI_FLAG_BUS_MASTER_BUG)) {
+ virtio_pci_stop_ioeventfd(proxy);
+ virtio_set_status(proxy->vdev,
+ proxy->vdev->status & ~VIRTIO_CONFIG_S_DRIVER_OK);
+ }
}
}
pci_default_write_config(pci_dev, address, val, len);
- if(proxy->vdev->nvectors)
- msix_write_config(pci_dev, address, val, len);
+ msix_write_config(pci_dev, address, val, len);
+}
+
+static unsigned virtio_pci_get_features(void *opaque)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ return proxy->host_features;
+}
+
+static void virtio_pci_guest_notifier_read(void *opaque)
+{
+ VirtQueue *vq = opaque;
+ EventNotifier *n = virtio_queue_get_guest_notifier(vq);
+ if (event_notifier_test_and_clear(n)) {
+ virtio_irq(vq);
+ }
+}
+
+static int virtio_pci_set_guest_notifier(void *opaque, int n, bool assign)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
+ EventNotifier *notifier = virtio_queue_get_guest_notifier(vq);
+
+ if (assign) {
+ int r = event_notifier_init(notifier, 0);
+ if (r < 0) {
+ return r;
+ }
+ qemu_set_fd_handler(event_notifier_get_fd(notifier),
+ virtio_pci_guest_notifier_read, NULL, vq);
+ } else {
+ qemu_set_fd_handler(event_notifier_get_fd(notifier),
+ NULL, NULL, NULL);
+ event_notifier_cleanup(notifier);
+ }
+
+ return 0;
+}
+
+static bool virtio_pci_query_guest_notifiers(void *opaque)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ return msix_enabled(&proxy->pci_dev);
+}
+
+static int virtio_pci_set_guest_notifiers(void *opaque, bool assign)
+{
+ VirtIOPCIProxy *proxy = opaque;
+ VirtIODevice *vdev = proxy->vdev;
+ int r, n;
+
+ for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
+ if (!virtio_queue_get_num(vdev, n)) {
+ break;
+ }
+
+ r = virtio_pci_set_guest_notifier(opaque, n, assign);
+ if (r < 0) {
+ goto assign_error;
+ }
+ }
+
+ return 0;
+
+assign_error:
+ /* We get here on assignment failure. Recover by undoing for VQs 0 .. n. */
+ while (--n >= 0) {
+ virtio_pci_set_guest_notifier(opaque, n, !assign);
+ }
+ return r;
+}
+
+static int virtio_pci_set_host_notifier(void *opaque, int n, bool assign)
+{
+ VirtIOPCIProxy *proxy = opaque;
+
+ /* Stop using ioeventfd for virtqueue kick if the device starts using host
+ * notifiers. This makes it easy to avoid stepping on each others' toes.
+ */
+ proxy->ioeventfd_disabled = assign;
+ if (assign) {
+ virtio_pci_stop_ioeventfd(proxy);
+ }
+ /* We don't need to start here: it's not needed because backend
+ * currently only stops on status change away from ok,
+ * reset, vmstop and such. If we do add code to start here,
+ * need to check vmstate, device state etc. */
+ return virtio_pci_set_host_notifier_internal(proxy, n, assign);
+}
+
+static void virtio_pci_vmstate_change(void *opaque, bool running)
+{
+ VirtIOPCIProxy *proxy = opaque;
+
+ if (running) {
+ virtio_pci_start_ioeventfd(proxy);
+ } else {
+ virtio_pci_stop_ioeventfd(proxy);
+ }
}
static const VirtIOBindings virtio_pci_bindings = {
.load_config = virtio_pci_load_config,
.save_queue = virtio_pci_save_queue,
.load_queue = virtio_pci_load_queue,
+ .get_features = virtio_pci_get_features,
+ .query_guest_notifiers = virtio_pci_query_guest_notifiers,
+ .set_host_notifier = virtio_pci_set_host_notifier,
+ .set_guest_notifiers = virtio_pci_set_guest_notifiers,
+ .vmstate_change = virtio_pci_vmstate_change,
};
static void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev,
config[0x09] = pif;
pci_config_set_class(config, class_code);
- config[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL;
config[0x2c] = vendor & 0xFF;
config[0x2d] = (vendor >> 8) & 0xFF;
config[0x3d] = 1;
- if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0,
- TARGET_PAGE_SIZE)) {
+ if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) {
pci_register_bar(&proxy->pci_dev, 1,
msix_bar_size(&proxy->pci_dev),
- PCI_ADDRESS_SPACE_MEM,
+ PCI_BASE_ADDRESS_SPACE_MEMORY,
msix_mmio_map);
- proxy->pci_dev.unregister = msix_uninit;
} else
vdev->nvectors = 0;
if (size & (size-1))
size = 1 << qemu_fls(size);
- pci_register_bar(&proxy->pci_dev, 0, size, PCI_ADDRESS_SPACE_IO,
+ pci_register_bar(&proxy->pci_dev, 0, size, PCI_BASE_ADDRESS_SPACE_IO,
virtio_map);
- qemu_register_reset(virtio_pci_reset, proxy);
+ if (!kvm_has_many_ioeventfds()) {
+ proxy->flags &= ~VIRTIO_PCI_FLAG_USE_IOEVENTFD;
+ }
virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
+ proxy->host_features |= 0x1 << VIRTIO_F_NOTIFY_ON_EMPTY;
+ proxy->host_features |= 0x1 << VIRTIO_F_BAD_FEATURE;
+ proxy->host_features = vdev->get_features(vdev, proxy->host_features);
}
static int virtio_blk_init_pci(PCIDevice *pci_dev)
proxy->class_code != PCI_CLASS_STORAGE_OTHER)
proxy->class_code = PCI_CLASS_STORAGE_SCSI;
- if (!proxy->dinfo) {
- qemu_error("virtio-blk-pci: drive property not set\n");
+ vdev = virtio_blk_init(&pci_dev->qdev, &proxy->block);
+ if (!vdev) {
return -1;
}
- vdev = virtio_blk_init(&pci_dev->qdev, proxy->dinfo);
vdev->nvectors = proxy->nvectors;
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
return 0;
}
-static int virtio_console_init_pci(PCIDevice *pci_dev)
+static int virtio_exit_pci(PCIDevice *pci_dev)
+{
+ return msix_uninit(pci_dev);
+}
+
+static int virtio_blk_exit_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+
+ virtio_pci_stop_ioeventfd(proxy);
+ virtio_blk_exit(proxy->vdev);
+ blockdev_mark_auto_del(proxy->block.bs);
+ return virtio_exit_pci(pci_dev);
+}
+
+static int virtio_serial_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
proxy->class_code != PCI_CLASS_OTHERS) /* qemu-kvm */
proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
- vdev = virtio_console_init(&pci_dev->qdev);
+ vdev = virtio_serial_init(&pci_dev->qdev, proxy->max_virtserial_ports);
+ if (!vdev) {
+ return -1;
+ }
+ vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
+ ? proxy->max_virtserial_ports + 1
+ : proxy->nvectors;
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_CONSOLE,
proxy->class_code, 0x00);
+ proxy->nvectors = vdev->nvectors;
return 0;
}
+static int virtio_serial_exit_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+
+ virtio_serial_exit(proxy->vdev);
+ return virtio_exit_pci(pci_dev);
+}
+
static int virtio_net_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
VirtIODevice *vdev;
- vdev = virtio_net_init(&pci_dev->qdev);
-
- /* set nvectors from property, unless the user specified something
- * via -net nic,model=virtio,vectors=n command line option */
- if (pci_dev->qdev.nd->nvectors == NIC_NVECTORS_UNSPECIFIED)
- if (proxy->nvectors != NIC_NVECTORS_UNSPECIFIED)
- vdev->nvectors = proxy->nvectors;
+ vdev = virtio_net_init(&pci_dev->qdev, &proxy->nic, &proxy->net);
+ vdev->nvectors = proxy->nvectors;
virtio_init_pci(proxy, vdev,
PCI_VENDOR_ID_REDHAT_QUMRANET,
PCI_DEVICE_ID_VIRTIO_NET,
return 0;
}
+static int virtio_net_exit_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+
+ virtio_pci_stop_ioeventfd(proxy);
+ virtio_net_exit(proxy->vdev);
+ return virtio_exit_pci(pci_dev);
+}
+
static int virtio_balloon_init_pci(PCIDevice *pci_dev)
{
VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
return 0;
}
+#ifdef CONFIG_VIRTFS
+static int virtio_9p_init_pci(PCIDevice *pci_dev)
+{
+ VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
+ VirtIODevice *vdev;
+
+ vdev = virtio_9p_init(&pci_dev->qdev, &proxy->fsconf);
+ vdev->nvectors = proxy->nvectors;
+ virtio_init_pci(proxy, vdev,
+ PCI_VENDOR_ID_REDHAT_QUMRANET,
+ 0x1009,
+ 0x2,
+ 0x00);
+ /* make the actual value visible */
+ proxy->nvectors = vdev->nvectors;
+ return 0;
+}
+#endif
+
static PCIDeviceInfo virtio_info[] = {
{
.qdev.name = "virtio-blk-pci",
+ .qdev.alias = "virtio-blk",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_blk_init_pci,
+ .exit = virtio_blk_exit_pci,
.qdev.props = (Property[]) {
DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
- DEFINE_PROP_DRIVE("drive", VirtIOPCIProxy, dinfo),
+ DEFINE_BLOCK_PROPERTIES(VirtIOPCIProxy, block),
+ DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
+ VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features),
DEFINE_PROP_END_OF_LIST(),
},
+ .qdev.reset = virtio_pci_reset,
},{
.qdev.name = "virtio-net-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_net_init_pci,
+ .exit = virtio_net_exit_pci,
+ .romfile = "pxe-virtio.bin",
.qdev.props = (Property[]) {
- DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
- NIC_NVECTORS_UNSPECIFIED),
+ DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
+ VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, false),
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
+ DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
+ DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
+ DEFINE_PROP_UINT32("x-txtimer", VirtIOPCIProxy,
+ net.txtimer, TX_TIMER_INTERVAL),
+ DEFINE_PROP_INT32("x-txburst", VirtIOPCIProxy,
+ net.txburst, TX_BURST),
+ DEFINE_PROP_STRING("tx", VirtIOPCIProxy, net.tx),
DEFINE_PROP_END_OF_LIST(),
},
+ .qdev.reset = virtio_pci_reset,
},{
- .qdev.name = "virtio-console-pci",
+ .qdev.name = "virtio-serial-pci",
+ .qdev.alias = "virtio-serial",
.qdev.size = sizeof(VirtIOPCIProxy),
- .init = virtio_console_init_pci,
+ .init = virtio_serial_init_pci,
+ .exit = virtio_serial_exit_pci,
.qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
+ DEV_NVECTORS_UNSPECIFIED),
DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
+ DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
+ DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy, max_virtserial_ports,
+ 31),
DEFINE_PROP_END_OF_LIST(),
},
+ .qdev.reset = virtio_pci_reset,
},{
.qdev.name = "virtio-balloon-pci",
.qdev.size = sizeof(VirtIOPCIProxy),
.init = virtio_balloon_init_pci,
+ .exit = virtio_exit_pci,
+ .qdev.props = (Property[]) {
+ DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+ .qdev.reset = virtio_pci_reset,
},{
+#ifdef CONFIG_VIRTFS
+ .qdev.name = "virtio-9p-pci",
+ .qdev.size = sizeof(VirtIOPCIProxy),
+ .init = virtio_9p_init_pci,
+ .qdev.props = (Property[]) {
+ DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
+ DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
+ DEFINE_PROP_STRING("mount_tag", VirtIOPCIProxy, fsconf.tag),
+ DEFINE_PROP_STRING("fsdev", VirtIOPCIProxy, fsconf.fsdev_id),
+ DEFINE_PROP_END_OF_LIST(),
+ },
+ }, {
+#endif
/* end of list */
}
};
projects / qemu.git / blobdiff