# *-*- Mode: Python -*-*
+##
+#
+# Echo back a unique integer value, and prepend to response a
+# leading sentinel byte (0xFF) the client can check scan for.
+#
+# This is used by clients talking to the guest agent over the
+# wire to ensure the stream is in sync and doesn't contain stale
+# data from previous client. It must be issued upon initial
+# connection, and after any client-side timeouts (including
+# timeouts on receiving a response to this command).
+#
+# After issuing this request, all guest agent responses should be
+# ignored until the response containing the unique integer value
+# the client passed in is returned. Receival of the 0xFF sentinel
+# byte must be handled as an indication that the client's
+# lexer/tokenizer/parser state should be flushed/reset in
+# preparation for reliably receiving the subsequent response. As
+# an optimization, clients may opt to ignore all data until a
+# sentinel value is receiving to avoid unnecessary processing of
+# stale data.
+#
+# Similarly, clients should also precede this *request*
+# with a 0xFF byte to make sure the guest agent flushes any
+# partially read JSON data from a previous client connection.
+#
+# @id: randomly generated 64-bit integer
+#
+# Returns: The unique integer id passed in by the client
+#
+# Since: 1.1
+# ##
+{ 'command': 'guest-sync-delimited'
+ 'data': { 'id': 'int' },
+ 'returns': 'int' }
+
##
# @guest-sync:
#
# partially-delivered JSON text in such a way that this response
# can be obtained.
#
+# In cases where a partial stale response was previously
+# received by the client, this cannot always be done reliably.
+# One particular scenario being if qemu-ga responses are fed
+# character-by-character into a JSON parser. In these situations,
+# using guest-sync-delimited may be optimal.
+#
+# For clients that fetch responses line by line and convert them
+# to JSON objects, guest-sync should be sufficient, but note that
+# in cases where the channel is dirty some attempts at parsing the
+# response may result in a parser error.
+#
# Such clients should also precede this command
-# with a 0xFF byte to make such the guest agent flushes any
+# with a 0xFF byte to make sure the guest agent flushes any
# partially read JSON data from a previous session.
#
# @id: randomly generated 64-bit integer
# @guest-shutdown:
#
# Initiate guest-activated shutdown. Note: this is an asynchronous
-# shutdown request, with no guaruntee of successful shutdown. Errors
-# will be logged to guest's syslog.
+# shutdown request, with no guarantee of successful shutdown.
#
# @mode: #optional "halt", "powerdown" (default), or "reboot"
#
-# Returns: Nothing on success
+# This command does NOT return a response on success. Success condition
+# is indicated by the VM exiting with a zero exit status or, when
+# running with --no-shutdown, by issuing the query-status QMP command
+# to confirm the VM status is "shutdown".
#
# Since: 0.15.0
##
-{ 'command': 'guest-shutdown', 'data': { '*mode': 'str' } }
+{ 'command': 'guest-shutdown', 'data': { '*mode': 'str' },
+ 'success-response': 'no' }
##
# @guest-file-open:
##
# @GuestFsFreezeStatus
#
-# An enumation of filesystem freeze states
+# An enumeration of filesystem freeze states
#
# @thawed: filesystems thawed/unfrozen
#
# @frozen: all non-network guest filesystems frozen
#
-# @error: failure to thaw 1 or more
-# previously frozen filesystems, or failure to open a previously
-# cached filesytem (filesystem unmounted/directory changes, etc).
-#
# Since: 0.15.0
##
{ 'enum': 'GuestFsfreezeStatus',
- 'data': [ 'thawed', 'frozen', 'error' ] }
+ 'data': [ 'thawed', 'frozen' ] }
##
# @guest-fsfreeze-status:
#
# Returns: GuestFsfreezeStatus ("thawed", "frozen", etc., as defined below)
#
+# Note: This may fail to properly report the current state as a result of
+# some other guest processes having issued an fs freeze/thaw.
+#
# Since: 0.15.0
##
{ 'command': 'guest-fsfreeze-status',
##
# @guest-fsfreeze-freeze:
#
-# Sync and freeze all non-network guest filesystems
+# Sync and freeze all freezable, local guest filesystems
#
-# Returns: Number of file systems frozen on success
+# Returns: Number of file systems currently frozen. On error, all filesystems
+# will be thawed.
#
# Since: 0.15.0
##
##
# @guest-fsfreeze-thaw:
#
-# Unfreeze frozen guest fileystems
+# Unfreeze all frozen guest filesystems
+#
+# Returns: Number of file systems thawed by this call
#
-# Returns: Number of file systems thawed
-# If error, -1 (unknown error) or -errno
+# Note: if return value does not match the previous call to
+# guest-fsfreeze-freeze, this likely means some freezable
+# filesystems were unfrozen before this call, and that the
+# filesystem state may have changed before issuing this
+# command.
#
# Since: 0.15.0
##
{ 'command': 'guest-fsfreeze-thaw',
'returns': 'int' }
+
+##
+# @guest-fstrim:
+#
+# Discard (or "trim") blocks which are not in use by the filesystem.
+#
+# @minimum:
+# Minimum contiguous free range to discard, in bytes. Free ranges
+# smaller than this may be ignored (this is a hint and the guest
+# may not respect it). By increasing this value, the fstrim
+# operation will complete more quickly for filesystems with badly
+# fragmented free space, although not all blocks will be discarded.
+# The default value is zero, meaning "discard every free block".
+#
+# Returns: Nothing.
+#
+# Since: 1.2
+##
+{ 'command': 'guest-fstrim',
+ 'data': { '*minimum': 'int' } }
+
+##
+# @guest-suspend-disk
+#
+# Suspend guest to disk.
+#
+# This command tries to execute the scripts provided by the pm-utils package.
+# If it's not available, the suspend operation will be performed by manually
+# writing to a sysfs file.
+#
+# For the best results it's strongly recommended to have the pm-utils
+# package installed in the guest.
+#
+# This command does NOT return a response on success. There is a high chance
+# the command succeeded if the VM exits with a zero exit status or, when
+# running with --no-shutdown, by issuing the query-status QMP command to
+# to confirm the VM status is "shutdown". However, the VM could also exit
+# (or set its status to "shutdown") due to other reasons.
+#
+# The following errors may be returned:
+# If suspend to disk is not supported, Unsupported
+#
+# Notes: It's strongly recommended to issue the guest-sync command before
+# sending commands when the guest resumes
+#
+# Since: 1.1
+##
+{ 'command': 'guest-suspend-disk', 'success-response': 'no' }
+
+##
+# @guest-suspend-ram
+#
+# Suspend guest to ram.
+#
+# This command tries to execute the scripts provided by the pm-utils package.
+# If it's not available, the suspend operation will be performed by manually
+# writing to a sysfs file.
+#
+# For the best results it's strongly recommended to have the pm-utils
+# package installed in the guest.
+#
+# IMPORTANT: guest-suspend-ram requires QEMU to support the 'system_wakeup'
+# command. Thus, it's *required* to query QEMU for the presence of the
+# 'system_wakeup' command before issuing guest-suspend-ram.
+#
+# This command does NOT return a response on success. There are two options
+# to check for success:
+# 1. Wait for the SUSPEND QMP event from QEMU
+# 2. Issue the query-status QMP command to confirm the VM status is
+# "suspended"
+#
+# The following errors may be returned:
+# If suspend to ram is not supported, Unsupported
+#
+# Notes: It's strongly recommended to issue the guest-sync command before
+# sending commands when the guest resumes
+#
+# Since: 1.1
+##
+{ 'command': 'guest-suspend-ram', 'success-response': 'no' }
+
+##
+# @guest-suspend-hybrid
+#
+# Save guest state to disk and suspend to ram.
+#
+# This command requires the pm-utils package to be installed in the guest.
+#
+# IMPORTANT: guest-suspend-hybrid requires QEMU to support the 'system_wakeup'
+# command. Thus, it's *required* to query QEMU for the presence of the
+# 'system_wakeup' command before issuing guest-suspend-hybrid.
+#
+# This command does NOT return a response on success. There are two options
+# to check for success:
+# 1. Wait for the SUSPEND QMP event from QEMU
+# 2. Issue the query-status QMP command to confirm the VM status is
+# "suspended"
+#
+# The following errors may be returned:
+# If hybrid suspend is not supported, Unsupported
+#
+# Notes: It's strongly recommended to issue the guest-sync command before
+# sending commands when the guest resumes
+#
+# Since: 1.1
+##
+{ 'command': 'guest-suspend-hybrid', 'success-response': 'no' }
+
+##
+# @GuestIpAddressType:
+#
+# An enumeration of supported IP address types
+#
+# @ipv4: IP version 4
+#
+# @ipv6: IP version 6
+#
+# Since: 1.1
+##
+{ 'enum': 'GuestIpAddressType',
+ 'data': [ 'ipv4', 'ipv6' ] }
+
+##
+# @GuestIpAddress:
+#
+# @ip-address: IP address
+#
+# @ip-address-type: Type of @ip-address (e.g. ipv4, ipv6)
+#
+# @prefix: Network prefix length of @ip-address
+#
+# Since: 1.1
+##
+{ 'type': 'GuestIpAddress',
+ 'data': {'ip-address': 'str',
+ 'ip-address-type': 'GuestIpAddressType',
+ 'prefix': 'int'} }
+
+##
+# @GuestNetworkInterface:
+#
+# @name: The name of interface for which info are being delivered
+#
+# @hardware-address: Hardware address of @name
+#
+# @ip-addresses: List of addresses assigned to @name
+#
+# Since: 1.1
+##
+{ 'type': 'GuestNetworkInterface',
+ 'data': {'name': 'str',
+ '*hardware-address': 'str',
+ '*ip-addresses': ['GuestIpAddress'] } }
+
+##
+# @guest-network-get-interfaces:
+#
+# Get list of guest IP addresses, MAC addresses
+# and netmasks.
+#
+# Returns: List of GuestNetworkInfo on success.
+#
+# Since: 1.1
+##
+{ 'command': 'guest-network-get-interfaces',
+ 'returns': ['GuestNetworkInterface'] }
projects / qemu.git / blobdiff