# @suspended: guest is suspended (ACPI S3)
#
# @watchdog: the watchdog action is configured to pause and has been triggered
+#
+# @guest-panicked: guest has been panicked as a result of guest OS panic
##
{ 'enum': 'RunState',
'data': [ 'debug', 'inmigrate', 'internal-error', 'io-error', 'paused',
'postmigrate', 'prelaunch', 'finish-migrate', 'restore-vm',
- 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog' ] }
+ 'running', 'save-vm', 'shutdown', 'suspended', 'watchdog',
+ 'guest-panicked' ] }
##
# @SnapshotInfo
#
# @snapshots: #optional list of VM snapshots
#
+# @backing-image: #optional info of the backing image (since 1.6)
+#
# Since: 1.3
#
##
'*actual-size': 'int', 'virtual-size': 'int',
'*cluster-size': 'int', '*encrypted': 'bool',
'*backing-filename': 'str', '*full-backing-filename': 'str',
- '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'] } }
+ '*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
+ '*backing-image': 'ImageInfo' } }
##
# @ImageCheck:
#
# Since: 1.4
##
-{ 'enum': 'DataFormat'
+{ 'enum': 'DataFormat',
'data': [ 'utf8', 'base64' ] }
##
# @dirty-pages-rate: number of pages dirtied by second by the
# guest (since 1.3)
#
+# @mbps: throughput in megabits/sec. (since 1.6)
+#
# Since: 0.14.0
##
{ 'type': 'MigrationStats',
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
- 'normal-bytes': 'int', 'dirty-pages-rate' : 'int' } }
+ 'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
+ 'mbps' : 'number' } }
##
# @XBZRLECacheStats
# expected downtime in milliseconds for the guest in last walk
# of the dirty bitmap. (since 1.3)
#
+# @setup-time: #optional amount of setup time in milliseconds _before_ the
+# iterations begin but _after_ the QMP command is issued. This is designed
+# to provide an accounting of any activities (such as RDMA pinning) which
+# may be expensive, but do not actually occur during the iterative
+# migration rounds themselves. (since 1.6)
+#
# Since: 0.14.0
##
{ 'type': 'MigrationInfo',
'*xbzrle-cache': 'XBZRLECacheStats',
'*total-time': 'int',
'*expected-downtime': 'int',
- '*downtime': 'int'} }
+ '*downtime': 'int',
+ '*setup-time': 'int'} }
##
# @query-migrate
# This feature allows us to minimize migration traffic for certain work
# loads, by sending compressed difference of the pages
#
+# @x-rdma-pin-all: Controls whether or not the entire VM memory footprint is
+# mlock()'d on demand or all at once. Refer to docs/rdma.txt for usage.
+# Disabled by default. Experimental: may (or may not) be renamed after
+# further testing is complete. (since 1.6)
+#
+# @zero-blocks: During storage migration encode blocks of zeroes efficiently. This
+# essentially saves 1MB of zeroes per block on the wire. Enabling requires
+# source and target VM to support this feature. To enable it is sufficient
+# to enable the capability on the source VM. The feature is disabled by
+# default. (since 1.6)
+#
+# @auto-converge: If enabled, QEMU will automatically throttle down the guest
+# to speed up convergence of RAM migration. (since 1.6)
+#
# Since: 1.2
##
{ 'enum': 'MigrationCapability',
- 'data': ['xbzrle'] }
+ 'data': ['xbzrle', 'x-rdma-pin-all', 'auto-converge', 'zero-blocks'] }
##
# @MigrationCapabilityStatus
#
# @iops_wr: write I/O operations per second is specified
#
+# @image: the info of image used (since: 1.6)
+#
# Since: 0.14.0
#
# Notes: This interface is only found in @BlockInfo.
'*backing_file': 'str', 'backing_file_depth': 'int',
'encrypted': 'bool', 'encryption_key_missing': 'bool',
'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
- 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int'} }
+ 'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
+ 'image': 'ImageInfo' } }
##
# @BlockDeviceIoStatus:
##
{ 'command': 'cpu', 'data': {'index': 'int'} }
+##
+# @cpu-add
+#
+# Adds CPU with specified ID
+#
+# @id: ID of CPU to be created, valid values [0..max_cpus)
+#
+# Returns: Nothing on success
+#
+# Since 1.5
+##
+{ 'command': 'cpu-add', 'data': {'id': 'int'} }
+
##
# @memsave:
#
#
# Since: 1.1
##
-{ 'enum': 'NewImageMode'
+{ 'enum': 'NewImageMode',
'data': [ 'existing', 'absolute-paths' ] }
##
'*mode': 'NewImageMode' } }
##
-# @BlockdevAction
+# @DriveBackup
+#
+# @device: the name of the device which should be copied.
+#
+# @target: the target of the new image. If the file exists, or if it
+# is a device, the existing file/device will be used as the new
+# destination. If it does not exist, a new file will be created.
+#
+# @format: #optional the format of the new destination, default is to
+# probe if @mode is 'existing', else the format of the source
+#
+# @sync: what parts of the disk image should be copied to the destination
+# (all the disk, only the sectors allocated in the topmost image, or
+# only new I/O).
+#
+# @mode: #optional whether and how QEMU should create a new image, default is
+# 'absolute-paths'.
+#
+# @speed: #optional the maximum speed, in bytes per second
+#
+# @on-source-error: #optional the action to take on an error on the source,
+# default 'report'. 'stop' and 'enospc' can only be used
+# if the block device supports io-status (see BlockInfo).
+#
+# @on-target-error: #optional the action to take on an error on the target,
+# default 'report' (no limitations, since this applies to
+# a different block device than @device).
+#
+# Note that @on-source-error and @on-target-error only affect background I/O.
+# If an error occurs during a guest write request, the device's rerror/werror
+# actions will be used.
+#
+# Since: 1.6
+##
+{ 'type': 'DriveBackup',
+ 'data': { 'device': 'str', 'target': 'str', '*format': 'str',
+ 'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
+ '*speed': 'int',
+ '*on-source-error': 'BlockdevOnError',
+ '*on-target-error': 'BlockdevOnError' } }
+
+##
+# @Abort
+#
+# This action can be used to test transaction failure.
+#
+# Since: 1.6
+###
+{ 'type': 'Abort',
+ 'data': { } }
+
+##
+# @TransactionAction
#
# A discriminated record of operations that can be performed with
# @transaction.
##
-{ 'union': 'BlockdevAction',
+{ 'union': 'TransactionAction',
'data': {
- 'blockdev-snapshot-sync': 'BlockdevSnapshot'
+ 'blockdev-snapshot-sync': 'BlockdevSnapshot',
+ 'drive-backup': 'DriveBackup',
+ 'abort': 'Abort'
} }
##
# @transaction
#
-# Atomically operate on a group of one or more block devices. If
-# any operation fails, then the entire set of actions will be
-# abandoned and the appropriate error returned. The only operation
-# supported is currently blockdev-snapshot-sync.
+# Executes a number of transactionable QMP commands atomically. If any
+# operation fails, then the entire set of actions will be abandoned and the
+# appropriate error returned.
#
# List of:
-# @BlockdevAction: information needed for the device snapshot
+# @TransactionAction: information needed for the respective operation
#
# Returns: nothing on success
-# If @device is not a valid block device, DeviceNotFound
+# Errors depend on the operations of the transaction
#
-# Note: The transaction aborts on the first failure. Therefore, there will
-# be only one device or snapshot file returned in an error condition, and
+# Note: The transaction aborts on the first failure. Therefore, there will be
+# information on only one failed operation returned in an error condition, and
# subsequent actions will not have been attempted.
#
# Since 1.1
##
{ 'command': 'transaction',
- 'data': { 'actions': [ 'BlockdevAction' ] } }
+ 'data': { 'actions': [ 'TransactionAction' ] } }
##
# @blockdev-snapshot-sync
#
# Generates a synchronous snapshot of a block device.
#
-# @device: the name of the device to generate the snapshot from.
-#
-# @snapshot-file: the target of the new image. If the file exists, or if it
-# is a device, the snapshot will be created in the existing
-# file/device. If does not exist, a new file will be created.
-#
-# @format: #optional the format of the snapshot image, default is 'qcow2'.
-#
-# @mode: #optional whether and how QEMU should create a new image, default is
-# 'absolute-paths'.
+# For the arguments, see the documentation of BlockdevSnapshot.
#
# Returns: nothing on success
# If @device is not a valid block device, DeviceNotFound
# Since 0.14.0
##
{ 'command': 'blockdev-snapshot-sync',
- 'data': { 'device': 'str', 'snapshot-file': 'str', '*format': 'str',
- '*mode': 'NewImageMode'} }
+ 'data': 'BlockdevSnapshot' }
##
# @human-monitor-command:
'data': { 'device': 'str', '*base': 'str', 'top': 'str',
'*speed': 'int' } }
+##
+# @drive-backup
+#
+# Start a point-in-time copy of a block device to a new destination. The
+# status of ongoing drive-backup operations can be checked with
+# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
+# The operation can be stopped before it has completed using the
+# block-job-cancel command.
+#
+# For the arguments, see the documentation of DriveBackup.
+#
+# Returns: nothing on success
+# If @device is not a valid block device, DeviceNotFound
+#
+# Since 1.6
+##
+{ 'command': 'drive-backup', 'data': 'DriveBackup' }
+
##
# @drive-mirror
#
##
{ 'command': 'query-fdsets', 'returns': ['FdsetInfo'] }
-##
-# @TargetType
-#
-# Target CPU emulation type
-#
-# These parameters correspond to the softmmu binary CPU name that is currently
-# running.
-#
-# Since: 1.2.0
-##
-{ 'enum': 'TargetType',
- 'data': [ 'alpha', 'arm', 'cris', 'i386', 'lm32', 'm68k', 'microblazeel',
- 'microblaze', 'mips64el', 'mips64', 'mipsel', 'mips', 'moxie',
- 'or32', 'ppc64', 'ppcemb', 'ppc', 's390x', 'sh4eb', 'sh4',
- 'sparc64', 'sparc', 'unicore32', 'x86_64', 'xtensaeb', 'xtensa' ] }
-
##
# @TargetInfo:
#
# Since: 1.2.0
##
{ 'type': 'TargetInfo',
- 'data': { 'arch': 'TargetType' } }
+ 'data': { 'arch': 'str' } }
##
# @query-target:
# @addr: socket address to listen on (server=true)
# or connect to (server=false)
# @server: #optional create server socket (default: true)
-# @wait: #optional wait for connect (not used for server
-# sockets, default: false)
+# @wait: #optional wait for incoming connection on server
+# sockets (default: false).
# @nodelay: #optional set TCP_NODELAY socket option (default: false)
-# @telnet: #optional enable telnet protocol (default: false)
+# @telnet: #optional enable telnet protocol on server
+# sockets (default: false)
#
# Since: 1.4
##
'*telnet' : 'bool' } }
##
-# @ChardevDgram:
+# @ChardevUdp:
#
# Configuration info for datagram socket chardevs.
#
#
# Since: 1.5
##
-{ 'type': 'ChardevDgram', 'data': { 'remote' : 'SocketAddress',
- '*local' : 'SocketAddress' } }
+{ 'type': 'ChardevUdp', 'data': { 'remote' : 'SocketAddress',
+ '*local' : 'SocketAddress' } }
##
# @ChardevMux:
'*rows' : 'int' } }
##
-# @ChardevRingbuf:
+# @ChardevMemory:
#
# Configuration info for memory chardevs
#
#
# Since: 1.5
##
-{ 'type': 'ChardevRingbuf', 'data': { '*size' : 'int' } }
+{ 'type': 'ChardevMemory', 'data': { '*size' : 'int' } }
##
# @ChardevBackend:
'parallel': 'ChardevHostdev',
'pipe' : 'ChardevHostdev',
'socket' : 'ChardevSocket',
- 'dgram' : 'ChardevDgram',
+ 'udp' : 'ChardevUdp',
'pty' : 'ChardevDummy',
'null' : 'ChardevDummy',
'mux' : 'ChardevMux',
'spicevmc' : 'ChardevSpiceChannel',
'spiceport' : 'ChardevSpicePort',
'vc' : 'ChardevVC',
- 'memory' : 'ChardevRingbuf' } }
+ 'memory' : 'ChardevMemory' } }
##
# @ChardevReturn:
'*asl_compiler_rev': 'uint32',
'*file': 'str',
'*data': 'str' }}
+
+##
+# @CommandLineParameterType:
+#
+# Possible types for an option parameter.
+#
+# @string: accepts a character string
+#
+# @boolean: accepts "on" or "off"
+#
+# @number: accepts a number
+#
+# @size: accepts a number followed by an optional suffix (K)ilo,
+# (M)ega, (G)iga, (T)era
+#
+# Since 1.5
+##
+{ 'enum': 'CommandLineParameterType',
+ 'data': ['string', 'boolean', 'number', 'size'] }
+
+##
+# @CommandLineParameterInfo:
+#
+# Details about a single parameter of a command line option.
+#
+# @name: parameter name
+#
+# @type: parameter @CommandLineParameterType
+#
+# @help: #optional human readable text string, not suitable for parsing.
+#
+# Since 1.5
+##
+{ 'type': 'CommandLineParameterInfo',
+ 'data': { 'name': 'str',
+ 'type': 'CommandLineParameterType',
+ '*help': 'str' } }
+
+##
+# @CommandLineOptionInfo:
+#
+# Details about a command line option, including its list of parameter details
+#
+# @option: option name
+#
+# @parameters: an array of @CommandLineParameterInfo
+#
+# Since 1.5
+##
+{ 'type': 'CommandLineOptionInfo',
+ 'data': { 'option': 'str', 'parameters': ['CommandLineParameterInfo'] } }
+
+##
+# @query-command-line-options:
+#
+# Query command line option schema.
+#
+# @option: #optional option name
+#
+# Returns: list of @CommandLineOptionInfo for all options (or for the given
+# @option). Returns an error if the given @option doesn't exist.
+#
+# Since 1.5
+##
+{'command': 'query-command-line-options', 'data': { '*option': 'str' },
+ 'returns': ['CommandLineOptionInfo'] }
+
+##
+# @X86CPURegister32
+#
+# A X86 32-bit register
+#
+# Since: 1.5
+##
+{ 'enum': 'X86CPURegister32',
+ 'data': [ 'EAX', 'EBX', 'ECX', 'EDX', 'ESP', 'EBP', 'ESI', 'EDI' ] }
+
+##
+# @X86CPUFeatureWordInfo
+#
+# Information about a X86 CPU feature word
+#
+# @cpuid-input-eax: Input EAX value for CPUID instruction for that feature word
+#
+# @cpuid-input-ecx: #optional Input ECX value for CPUID instruction for that
+# feature word
+#
+# @cpuid-register: Output register containing the feature bits
+#
+# @features: value of output register, containing the feature bits
+#
+# Since: 1.5
+##
+{ 'type': 'X86CPUFeatureWordInfo',
+ 'data': { 'cpuid-input-eax': 'int',
+ '*cpuid-input-ecx': 'int',
+ 'cpuid-register': 'X86CPURegister32',
+ 'features': 'int' } }
+
+##
+# @RxState:
+#
+# Packets receiving state
+#
+# @normal: filter assigned packets according to the mac-table
+#
+# @none: don't receive any assigned packet
+#
+# @all: receive all assigned packets
+#
+# Since: 1.6
+##
+{ 'enum': 'RxState', 'data': [ 'normal', 'none', 'all' ] }
+
+##
+# @RxFilterInfo:
+#
+# Rx-filter information for a NIC.
+#
+# @name: net client name
+#
+# @promiscuous: whether promiscuous mode is enabled
+#
+# @multicast: multicast receive state
+#
+# @unicast: unicast receive state
+#
+# @broadcast-allowed: whether to receive broadcast
+#
+# @multicast-overflow: multicast table is overflowed or not
+#
+# @unicast-overflow: unicast table is overflowed or not
+#
+# @main-mac: the main macaddr string
+#
+# @vlan-table: a list of active vlan id
+#
+# @unicast-table: a list of unicast macaddr string
+#
+# @multicast-table: a list of multicast macaddr string
+#
+# Since 1.6
+##
+
+{ 'type': 'RxFilterInfo',
+ 'data': {
+ 'name': 'str',
+ 'promiscuous': 'bool',
+ 'multicast': 'RxState',
+ 'unicast': 'RxState',
+ 'broadcast-allowed': 'bool',
+ 'multicast-overflow': 'bool',
+ 'unicast-overflow': 'bool',
+ 'main-mac': 'str',
+ 'vlan-table': ['int'],
+ 'unicast-table': ['str'],
+ 'multicast-table': ['str'] }}
+
+##
+# @query-rx-filter:
+#
+# Return rx-filter information for all NICs (or for the given NIC).
+#
+# @name: #optional net client name
+#
+# Returns: list of @RxFilterInfo for all NICs (or for the given NIC).
+# Returns an error if the given @name doesn't exist, or given
+# NIC doesn't support rx-filter querying, or given net client
+# isn't a NIC.
+#
+# Since: 1.6
+##
+{ 'command': 'query-rx-filter', 'data': { '*name': 'str' },
+ 'returns': ['RxFilterInfo'] }
projects / qemu.git / blobdiff