\input texinfo @c -*- texinfo -*-
@c %**start of header
@setfilename qemu-doc.info
+
+@documentlanguage en
+@documentencoding UTF-8
+
@settitle QEMU Emulator User Documentation
@exampleindent 0
@paragraphindent 0
@c %**end of header
+@ifinfo
+@direntry
+* QEMU: (qemu-doc). The QEMU Emulator User Documentation.
+@end direntry
+@end ifinfo
+
@iftex
@titlepage
@sp 7
* QEMU System emulator for non PC targets::
* QEMU User space emulator::
* compilation:: Compilation from the sources
+* License::
* Index::
@end menu
@end ifnottex
QEMU has two operating modes:
-@itemize @minus
+@itemize
+@cindex operating modes
@item
+@cindex system emulation
Full system emulation. In this mode, QEMU emulates a full system (for
example a PC), including one or several processors and various
peripherals. It can be used to launch different Operating Systems
without rebooting the PC or to debug system code.
@item
+@cindex user mode emulation
User mode emulation. In this mode, QEMU can launch
processes compiled for one CPU on another CPU. It can be used to
launch the Wine Windows API emulator (@url{http://www.winehq.org}) or
For system emulation, the following hardware targets are supported:
@itemize
+@cindex emulated target systems
+@cindex supported target systems
@item PC (x86 or x86_64 processor)
@item ISA PC (old style PC without PCI bus)
@item PREP (PowerPC processor)
@item MIPS Magnum (64-bit MIPS processor)
@item ARM Integrator/CP (ARM)
@item ARM Versatile baseboard (ARM)
-@item ARM RealView Emulation baseboard (ARM)
+@item ARM RealView Emulation/Platform baseboard (ARM)
@item Spitz, Akita, Borzoi, Terrier and Tosa PDAs (PXA270 processor)
@item Luminary Micro LM3S811EVB (ARM Cortex-M3)
@item Luminary Micro LM3S6965EVB (ARM Cortex-M3)
@item MusicPal (MV88W8618 ARM processor)
@item Gumstix "Connex" and "Verdex" motherboards (PXA255/270).
@item Siemens SX1 smartphone (OMAP310 processor)
+@item Syborg SVP base model (ARM Cortex-A8).
+@item AXIS-Devboard88 (CRISv32 ETRAX-FS).
+@item Petalogix Spartan 3aDSP1800 MMU ref design (MicroBlaze).
@end itemize
-For user emulation, x86, PowerPC, ARM, 32-bit MIPS, Sparc32/64 and ColdFire(m68k) CPUs are supported.
+@cindex supported user mode targets
+For user emulation, x86 (32 and 64 bit), PowerPC (32 and 64 bit),
+ARM, MIPS (32 bit only), Sparc (32 and 64 bit),
+Alpha, ColdFire(m68k), CRISv32 and MicroBlaze CPUs are supported.
@node Installation
@chapter Installation
@node install_linux
@section Linux
+@cindex installation (Linux)
If a precompiled package is available for your distribution - you just
have to install it. Otherwise, see @ref{compilation}.
@node install_windows
@section Windows
+@cindex installation (Windows)
Download the experimental binary installer at
@url{http://www.free.oszoo.org/@/download.html}.
+TODO (no longer available)
@node install_mac
@section Mac OS X
Download the experimental binary installer at
@url{http://www.free.oszoo.org/@/download.html}.
+TODO (no longer available)
@node QEMU PC System emulator
@chapter QEMU PC System emulator
+@cindex system emulation (PC)
@menu
* pcsys_introduction:: Introduction
* pcsys_monitor:: QEMU Monitor
* disk_images:: Disk Images
* pcsys_network:: Network emulation
+* pcsys_other_devs:: Other Devices
* direct_linux_boot:: Direct Linux Boot
* pcsys_usb:: USB emulation
* vnc_security:: VNC security
@item
Floppy disk
@item
-PCI/ISA PCI network adapters
+PCI and ISA network adapters
@item
Serial ports
@item
@item
Intel 82801AA AC97 Audio compatible sound card
@item
-Adlib(OPL2) - Yamaha YM3812 compatible chip
+Intel HD Audio Controller and HDA codec
+@item
+Adlib (OPL2) - Yamaha YM3812 compatible chip
@item
Gravis Ultrasound GF1 sound card
@item
QEMU uses YM3812 emulation by Tatsuyuki Satoh.
-QEMU uses GUS emulation(GUSEMU32 @url{http://www.deinmeister.de/gusemu/})
+QEMU uses GUS emulation (GUSEMU32 @url{http://www.deinmeister.de/gusemu/})
by Tibor "TS" Schütz.
+Not that, by default, GUS shares IRQ(7) with parallel ports and so
+qemu must be told to not have parallel ports to have working GUS
+
+@example
+qemu dos.img -soundhw gus -parallel none
+@end example
+
+Alternatively:
+@example
+qemu dos.img -device gus,irq=5
+@end example
+
+Or some other unclaimed IRQ.
+
CS4231A is the chip used in Windows Sound System and GUSMAX products
@c man end
@node pcsys_quickstart
@section Quick Start
+@cindex quick start
Download and uncompress the linux image (@file{linux.img}) and type:
@var{disk_image} is a raw hard disk image for IDE hard disk 0. Some
targets do not need a disk image.
-General options:
-@table @option
-@item -h
-Display help and exit
-
-@item -M @var{machine}
-Select the emulated @var{machine} (@code{-M ?} for list)
-
-@item -cpu @var{model}
-Select CPU model (-cpu ? for list and additional feature selection)
-
-@item -smp @var{n}
-Simulate an SMP system with @var{n} CPUs. On the PC target, up to 255
-CPUs are supported. On Sparc32 target, Linux limits the number of usable CPUs
-to 4.
-
-@item -fda @var{file}
-@item -fdb @var{file}
-Use @var{file} as floppy disk 0/1 image (@pxref{disk_images}). You can
-use the host floppy by using @file{/dev/fd0} as filename (@pxref{host_drives}).
-
-@item -hda @var{file}
-@item -hdb @var{file}
-@item -hdc @var{file}
-@item -hdd @var{file}
-Use @var{file} as hard disk 0, 1, 2 or 3 image (@pxref{disk_images}).
-
-@item -cdrom @var{file}
-Use @var{file} as CD-ROM image (you cannot use @option{-hdc} and
-@option{-cdrom} at the same time). You can use the host CD-ROM by
-using @file{/dev/cdrom} as filename (@pxref{host_drives}).
-
-@item -drive @var{option}[,@var{option}[,@var{option}[,...]]]
-
-Define a new drive. Valid options are:
-
-@table @code
-@item file=@var{file}
-This option defines which disk image (@pxref{disk_images}) to use with
-this drive. If the filename contains comma, you must double it
-(for instance, "file=my,,file" to use file "my,file").
-@item if=@var{interface}
-This option defines on which type on interface the drive is connected.
-Available types are: ide, scsi, sd, mtd, floppy, pflash, virtio.
-@item bus=@var{bus},unit=@var{unit}
-These options define where is connected the drive by defining the bus number and
-the unit id.
-@item index=@var{index}
-This option defines where is connected the drive by using an index in the list
-of available connectors of a given interface type.
-@item media=@var{media}
-This option defines the type of the media: disk or cdrom.
-@item cyls=@var{c},heads=@var{h},secs=@var{s}[,trans=@var{t}]
-These options have the same definition as they have in @option{-hdachs}.
-@item snapshot=@var{snapshot}
-@var{snapshot} is "on" or "off" and allows to enable snapshot for given drive (see @option{-snapshot}).
-@item cache=@var{cache}
-@var{cache} is "none", "writeback", or "writethrough" and controls how the host cache is used to access block data.
-@item format=@var{format}
-Specify which disk @var{format} will be used rather than detecting
-the format. Can be used to specifiy format=raw to avoid interpreting
-an untrusted format header.
-@item serial=@var{serial}
-This option specifies the serial number to assign to the device.
-@end table
-
-By default, writethrough caching is used for all block device. This means that
-the host page cache will be used to read and write data but write notification
-will be sent to the guest only when the data has been reported as written by
-the storage subsystem.
-
-Writeback caching will report data writes as completed as soon as the data is
-present in the host page cache. This is safe as long as you trust your host.
-If your host crashes or loses power, then the guest may experience data
-corruption. When using the @option{-snapshot} option, writeback caching is
-used by default.
-
-The host page can be avoided entirely with @option{cache=none}. This will
-attempt to do disk IO directly to the guests memory. QEMU may still perform
-an internal copy of the data.
-
-Some block drivers perform badly with @option{cache=writethrough}, most notably,
-qcow2. If performance is more important than correctness,
-@option{cache=writeback} should be used with qcow2. By default, if no explicit
-caching is specified for a qcow2 disk image, @option{cache=writeback} will be
-used. For all other disk types, @option{cache=writethrough} is the default.
-
-Instead of @option{-cdrom} you can use:
-@example
-qemu -drive file=file,index=2,media=cdrom
-@end example
-
-Instead of @option{-hda}, @option{-hdb}, @option{-hdc}, @option{-hdd}, you can
-use:
-@example
-qemu -drive file=file,index=0,media=disk
-qemu -drive file=file,index=1,media=disk
-qemu -drive file=file,index=2,media=disk
-qemu -drive file=file,index=3,media=disk
-@end example
-
-You can connect a CDROM to the slave of ide0:
-@example
-qemu -drive file=file,if=ide,index=1,media=cdrom
-@end example
-
-If you don't specify the "file=" argument, you define an empty drive:
-@example
-qemu -drive if=ide,index=1,media=cdrom
-@end example
-
-You can connect a SCSI disk with unit ID 6 on the bus #0:
-@example
-qemu -drive file=file,if=scsi,bus=0,unit=6
-@end example
-
-Instead of @option{-fda}, @option{-fdb}, you can use:
-@example
-qemu -drive file=file,index=0,if=floppy
-qemu -drive file=file,index=1,if=floppy
-@end example
-
-By default, @var{interface} is "ide" and @var{index} is automatically
-incremented:
-@example
-qemu -drive file=a -drive file=b"
-@end example
-is interpreted like:
-@example
-qemu -hda a -hdb b
-@end example
-
-@item -mtdblock file
-Use 'file' as on-board Flash memory image.
-
-@item -sd file
-Use 'file' as SecureDigital card image.
-
-@item -pflash file
-Use 'file' as a parallel flash image.
-
-@item -boot [a|c|d|n]
-Boot on floppy (a), hard disk (c), CD-ROM (d), or Etherboot (n). Hard disk boot
-is the default.
-
-@item -snapshot
-Write to temporary files instead of disk image files. In this case,
-the raw disk image you use is not written back. You can however force
-the write back by pressing @key{C-a s} (@pxref{disk_images}).
-
-@item -m @var{megs}
-Set virtual RAM size to @var{megs} megabytes. Default is 128 MiB. Optionally,
-a suffix of ``M'' or ``G'' can be used to signify a value in megabytes or
-gigabytes respectively.
-
-@item -k @var{language}
-
-Use keyboard layout @var{language} (for example @code{fr} for
-French). This option is only needed where it is not easy to get raw PC
-keycodes (e.g. on Macs, with some X11 servers or with a VNC
-display). You don't normally need to use it on PC/Linux or PC/Windows
-hosts.
-
-The available layouts are:
-@example
-ar de-ch es fo fr-ca hu ja mk no pt-br sv
-da en-gb et fr fr-ch is lt nl pl ru th
-de en-us fi fr-be hr it lv nl-be pt sl tr
-@end example
-
-The default is @code{en-us}.
-
-@item -audio-help
-
-Will show the audio subsystem help: list of drivers, tunable
-parameters.
-
-@item -soundhw @var{card1}[,@var{card2},...] or -soundhw all
-
-Enable audio and selected sound hardware. Use ? to print all
-available sound hardware.
-
-@example
-qemu -soundhw sb16,adlib disk.img
-qemu -soundhw es1370 disk.img
-qemu -soundhw ac97 disk.img
-qemu -soundhw all disk.img
-qemu -soundhw ?
-@end example
-
-Note that Linux's i810_audio OSS kernel (for AC97) module might
-require manually specifying clocking.
-
-@example
-modprobe i810_audio clocking=48000
-@end example
-
-@end table
-
-USB options:
-@table @option
-
-@item -usb
-Enable the USB driver (will be the default soon)
-
-@item -usbdevice @var{devname}
-Add the USB device @var{devname}. @xref{usb_devices}.
-
-@table @code
-
-@item mouse
-Virtual Mouse. This will override the PS/2 mouse emulation when activated.
-
-@item tablet
-Pointer device that uses absolute coordinates (like a touchscreen). This
-means qemu is able to report the mouse position without having to grab the
-mouse. Also overrides the PS/2 mouse emulation when activated.
-
-@item disk:[format=@var{format}]:file
-Mass storage device based on file. The optional @var{format} argument
-will be used rather than detecting the format. Can be used to specifiy
-format=raw to avoid interpreting an untrusted format header.
-
-@item host:bus.addr
-Pass through the host device identified by bus.addr (Linux only).
-
-@item host:vendor_id:product_id
-Pass through the host device identified by vendor_id:product_id (Linux only).
-
-@item serial:[vendorid=@var{vendor_id}][,productid=@var{product_id}]:@var{dev}
-Serial converter to host character device @var{dev}, see @code{-serial} for the
-available devices.
-
-@item braille
-Braille device. This will use BrlAPI to display the braille output on a real
-or fake device.
-
-@item net:options
-Network adapter that supports CDC ethernet and RNDIS protocols.
-
-@end table
-
-@item -name @var{name}
-Sets the @var{name} of the guest.
-This name will be displayed in the SDL window caption.
-The @var{name} will also be used for the VNC server.
-
-@item -uuid @var{uuid}
-Set system UUID.
-
-@end table
-
-Display options:
-@table @option
-
-@item -nographic
-
-Normally, QEMU uses SDL to display the VGA output. With this option,
-you can totally disable graphical output so that QEMU is a simple
-command line application. The emulated serial port is redirected on
-the console. Therefore, you can still use QEMU to debug a Linux kernel
-with a serial console.
-
-@item -curses
-
-Normally, QEMU uses SDL to display the VGA output. With this option,
-QEMU can display the VGA output when in text mode using a
-curses/ncurses interface. Nothing is displayed in graphical mode.
-
-@item -no-frame
-
-Do not use decorations for SDL windows and start them using the whole
-available screen space. This makes the using QEMU in a dedicated desktop
-workspace more convenient.
-
-@item -alt-grab
-
-Use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt).
-
-@item -no-quit
-
-Disable SDL window close capability.
-
-@item -sdl
-
-Enable SDL.
-
-@item -portrait
-
-Rotate graphical output 90 deg left (only PXA LCD).
-
-@item -vga @var{type}
-Select type of VGA card to emulate. Valid values for @var{type} are
-@table @code
-@item cirrus
-Cirrus Logic GD5446 Video card. All Windows versions starting from
-Windows 95 should recognize and use this graphic card. For optimal
-performances, use 16 bit color depth in the guest and the host OS.
-(This one is the default)
-@item std
-Standard VGA card with Bochs VBE extensions. If your guest OS
-supports the VESA 2.0 VBE extensions (e.g. Windows XP) and if you want
-to use high resolution modes (>= 1280x1024x16) then you should use
-this option.
-@item vmware
-VMWare SVGA-II compatible adapter. Use it if you have sufficiently
-recent XFree86/XOrg server or Windows guest with a driver for this
-card.
-@item none
-Disable VGA card.
-@end table
-
-@item -full-screen
-Start in full screen.
-
-@item -vnc @var{display}[,@var{option}[,@var{option}[,...]]]
-
-Normally, QEMU uses SDL to display the VGA output. With this option,
-you can have QEMU listen on VNC display @var{display} and redirect the VGA
-display over the VNC session. It is very useful to enable the usb
-tablet device when using this option (option @option{-usbdevice
-tablet}). When using the VNC display, you must use the @option{-k}
-parameter to set the keyboard layout if you are not using en-us. Valid
-syntax for the @var{display} is
-
-@table @code
-
-@item @var{host}:@var{d}
-
-TCP connections will only be allowed from @var{host} on display @var{d}.
-By convention the TCP port is 5900+@var{d}. Optionally, @var{host} can
-be omitted in which case the server will accept connections from any host.
-
-@item @code{unix}:@var{path}
-
-Connections will be allowed over UNIX domain sockets where @var{path} is the
-location of a unix socket to listen for connections on.
-
-@item none
-
-VNC is initialized but not started. The monitor @code{change} command
-can be used to later start the VNC server.
-
-@end table
-
-Following the @var{display} value there may be one or more @var{option} flags
-separated by commas. Valid options are
-
-@table @code
-
-@item reverse
-
-Connect to a listening VNC client via a ``reverse'' connection. The
-client is specified by the @var{display}. For reverse network
-connections (@var{host}:@var{d},@code{reverse}), the @var{d} argument
-is a TCP port number, not a display number.
-
-@item password
-
-Require that password based authentication is used for client connections.
-The password must be set separately using the @code{change} command in the
-@ref{pcsys_monitor}
-
-@item tls
-
-Require that client use TLS when communicating with the VNC server. This
-uses anonymous TLS credentials so is susceptible to a man-in-the-middle
-attack. It is recommended that this option be combined with either the
-@var{x509} or @var{x509verify} options.
-
-@item x509=@var{/path/to/certificate/dir}
-
-Valid if @option{tls} is specified. Require that x509 credentials are used
-for negotiating the TLS session. The server will send its x509 certificate
-to the client. It is recommended that a password be set on the VNC server
-to provide authentication of the client when this is used. The path following
-this option specifies where the x509 certificates are to be loaded from.
-See the @ref{vnc_security} section for details on generating certificates.
-
-@item x509verify=@var{/path/to/certificate/dir}
-
-Valid if @option{tls} is specified. Require that x509 credentials are used
-for negotiating the TLS session. The server will send its x509 certificate
-to the client, and request that the client send its own x509 certificate.
-The server will validate the client's certificate against the CA certificate,
-and reject clients when validation fails. If the certificate authority is
-trusted, this is a sufficient authentication mechanism. You may still wish
-to set a password on the VNC server as a second authentication layer. The
-path following this option specifies where the x509 certificates are to
-be loaded from. See the @ref{vnc_security} section for details on generating
-certificates.
-
-@item sasl
-
-Require that the client use SASL to authenticate with the VNC server.
-The exact choice of authentication method used is controlled from the
-system / user's SASL configuration file for the 'qemu' service. This
-is typically found in /etc/sasl2/qemu.conf. If running QEMU as an
-unprivileged user, an environment variable SASL_CONF_PATH can be used
-to make it search alternate locations for the service config.
-While some SASL auth methods can also provide data encryption (eg GSSAPI),
-it is recommended that SASL always be combined with the 'tls' and
-'x509' settings to enable use of SSL and server certificates. This
-ensures a data encryption preventing compromise of authentication
-credentials. See the @ref{vnc_security} section for details on using
-SASL authentication.
-
-@end table
-
-@end table
-
-Network options:
-
-@table @option
-
-@item -net nic[,vlan=@var{n}][,macaddr=@var{addr}][,model=@var{type}][,name=@var{name}]
-Create a new Network Interface Card and connect it to VLAN @var{n} (@var{n}
-= 0 is the default). The NIC is an ne2k_pci by default on the PC
-target. Optionally, the MAC address can be changed to @var{addr}
-and a @var{name} can be assigned for use in monitor commands. If no
-@option{-net} option is specified, a single NIC is created.
-Qemu can emulate several different models of network card.
-Valid values for @var{type} are
-@code{i82551}, @code{i82557b}, @code{i82559er},
-@code{ne2k_pci}, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139},
-@code{e1000}, @code{smc91c111}, @code{lance} and @code{mcf_fec}.
-Not all devices are supported on all targets. Use -net nic,model=?
-for a list of available devices for your target.
-
-@item -net user[,vlan=@var{n}][,hostname=@var{name}][,name=@var{name}]
-Use the user mode network stack which requires no administrator
-privilege to run. @option{hostname=name} can be used to specify the client
-hostname reported by the builtin DHCP server.
-
-@item -net channel,@var{port}:@var{dev}
-Forward @option{user} TCP connection to port @var{port} to character device @var{dev}
-
-@item -net tap[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,ifname=@var{name}][,script=@var{file}][,downscript=@var{dfile}]
-Connect the host TAP network interface @var{name} to VLAN @var{n}, use
-the network script @var{file} to configure it and the network script
-@var{dfile} to deconfigure it. If @var{name} is not provided, the OS
-automatically provides one. @option{fd}=@var{h} can be used to specify
-the handle of an already opened host TAP interface. The default network
-configure script is @file{/etc/qemu-ifup} and the default network
-deconfigure script is @file{/etc/qemu-ifdown}. Use @option{script=no}
-or @option{downscript=no} to disable script execution. Example:
-
-@example
-qemu linux.img -net nic -net tap
-@end example
-
-More complicated example (two NICs, each one connected to a TAP device)
-@example
-qemu linux.img -net nic,vlan=0 -net tap,vlan=0,ifname=tap0 \
- -net nic,vlan=1 -net tap,vlan=1,ifname=tap1
-@end example
-
-
-@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,listen=[@var{host}]:@var{port}][,connect=@var{host}:@var{port}]
-
-Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual
-machine using a TCP socket connection. If @option{listen} is
-specified, QEMU waits for incoming connections on @var{port}
-(@var{host} is optional). @option{connect} is used to connect to
-another QEMU instance using the @option{listen} option. @option{fd}=@var{h}
-specifies an already opened TCP socket.
-
-Example:
-@example
-# launch a first QEMU instance
-qemu linux.img -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,listen=:1234
-# connect the VLAN 0 of this instance to the VLAN 0
-# of the first instance
-qemu linux.img -net nic,macaddr=52:54:00:12:34:57 \
- -net socket,connect=127.0.0.1:1234
-@end example
-
-@item -net socket[,vlan=@var{n}][,name=@var{name}][,fd=@var{h}][,mcast=@var{maddr}:@var{port}]
-
-Create a VLAN @var{n} shared with another QEMU virtual
-machines using a UDP multicast socket, effectively making a bus for
-every QEMU with same multicast address @var{maddr} and @var{port}.
-NOTES:
-@enumerate
-@item
-Several QEMU can be running on different hosts and share same bus (assuming
-correct multicast setup for these hosts).
-@item
-mcast support is compatible with User Mode Linux (argument @option{eth@var{N}=mcast}), see
-@url{http://user-mode-linux.sf.net}.
-@item
-Use @option{fd=h} to specify an already opened UDP multicast socket.
-@end enumerate
-
-Example:
-@example
-# launch one QEMU instance
-qemu linux.img -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,mcast=230.0.0.1:1234
-# launch another QEMU instance on same "bus"
-qemu linux.img -net nic,macaddr=52:54:00:12:34:57 \
- -net socket,mcast=230.0.0.1:1234
-# launch yet another QEMU instance on same "bus"
-qemu linux.img -net nic,macaddr=52:54:00:12:34:58 \
- -net socket,mcast=230.0.0.1:1234
-@end example
-
-Example (User Mode Linux compat.):
-@example
-# launch QEMU instance (note mcast address selected
-# is UML's default)
-qemu linux.img -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,mcast=239.192.168.1:1102
-# launch UML
-/path/to/linux ubd0=/path/to/root_fs eth0=mcast
-@end example
-
-@item -net vde[,vlan=@var{n}][,name=@var{name}][,sock=@var{socketpath}][,port=@var{n}][,group=@var{groupname}][,mode=@var{octalmode}]
-Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and
-listening for incoming connections on @var{socketpath}. Use GROUP @var{groupname}
-and MODE @var{octalmode} to change default ownership and permissions for
-communication port. This option is available only if QEMU has been compiled
-with vde support enabled.
-
-Example:
-@example
-# launch vde switch
-vde_switch -F -sock /tmp/myswitch
-# launch QEMU instance
-qemu linux.img -net nic -net vde,sock=/tmp/myswitch
-@end example
-
-@item -net none
-Indicate that no network devices should be configured. It is used to
-override the default configuration (@option{-net nic -net user}) which
-is activated if no @option{-net} options are provided.
-
-@item -tftp @var{dir}
-When using the user mode network stack, activate a built-in TFTP
-server. The files in @var{dir} will be exposed as the root of a TFTP server.
-The TFTP client on the guest must be configured in binary mode (use the command
-@code{bin} of the Unix TFTP client). The host IP address on the guest is as
-usual 10.0.2.2.
-
-@item -bootp @var{file}
-When using the user mode network stack, broadcast @var{file} as the BOOTP
-filename. In conjunction with @option{-tftp}, this can be used to network boot
-a guest from a local directory.
-
-Example (using pxelinux):
-@example
-qemu -hda linux.img -boot n -tftp /path/to/tftp/files -bootp /pxelinux.0
-@end example
-
-@item -smb @var{dir}
-When using the user mode network stack, activate a built-in SMB
-server so that Windows OSes can access to the host files in @file{@var{dir}}
-transparently.
-
-In the guest Windows OS, the line:
-@example
-10.0.2.4 smbserver
-@end example
-must be added in the file @file{C:\WINDOWS\LMHOSTS} (for windows 9x/Me)
-or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows NT/2000).
-
-Then @file{@var{dir}} can be accessed in @file{\\smbserver\qemu}.
-
-Note that a SAMBA server must be installed on the host OS in
-@file{/usr/sbin/smbd}. QEMU was tested successfully with smbd version
-2.2.7a from the Red Hat 9 and version 3.0.10-1.fc3 from Fedora Core 3.
-
-@item -redir [tcp|udp]:@var{host-port}:[@var{guest-host}]:@var{guest-port}
-
-When using the user mode network stack, redirect incoming TCP or UDP
-connections to the host port @var{host-port} to the guest
-@var{guest-host} on guest port @var{guest-port}. If @var{guest-host}
-is not specified, its value is 10.0.2.15 (default address given by the
-built-in DHCP server).
-
-For example, to redirect host X11 connection from screen 1 to guest
-screen 0, use the following:
-
-@example
-# on the host
-qemu -redir tcp:6001::6000 [...]
-# this host xterm should open in the guest X11 server
-xterm -display :1
-@end example
-
-To redirect telnet connections from host port 5555 to telnet port on
-the guest, use the following:
-
-@example
-# on the host
-qemu -redir tcp:5555::23 [...]
-telnet localhost 5555
-@end example
-
-Then when you use on the host @code{telnet localhost 5555}, you
-connect to the guest telnet server.
-
-@end table
-
-Bluetooth(R) options:
-@table @option
-
-@item -bt hci[...]
-Defines the function of the corresponding Bluetooth HCI. -bt options
-are matched with the HCIs present in the chosen machine type. For
-example when emulating a machine with only one HCI built into it, only
-the first @code{-bt hci[...]} option is valid and defines the HCI's
-logic. The Transport Layer is decided by the machine type. Currently
-the machines @code{n800} and @code{n810} have one HCI and all other
-machines have none.
-
-@anchor{bt-hcis}
-The following three types are recognized:
-
-@table @code
-@item -bt hci,null
-(default) The corresponding Bluetooth HCI assumes no internal logic
-and will not respond to any HCI commands or emit events.
-
-@item -bt hci,host[:@var{id}]
-(@code{bluez} only) The corresponding HCI passes commands / events
-to / from the physical HCI identified by the name @var{id} (default:
-@code{hci0}) on the computer running QEMU. Only available on @code{bluez}
-capable systems like Linux.
-
-@item -bt hci[,vlan=@var{n}]
-Add a virtual, standard HCI that will participate in the Bluetooth
-scatternet @var{n} (default @code{0}). Similarly to @option{-net}
-VLANs, devices inside a bluetooth network @var{n} can only communicate
-with other devices in the same network (scatternet).
-@end table
-
-@item -bt vhci[,vlan=@var{n}]
-(Linux-host only) Create a HCI in scatternet @var{n} (default 0) attached
-to the host bluetooth stack instead of to the emulated target. This
-allows the host and target machines to participate in a common scatternet
-and communicate. Requires the Linux @code{vhci} driver installed. Can
-be used as following:
-
-@example
-qemu [...OPTIONS...] -bt hci,vlan=5 -bt vhci,vlan=5
-@end example
-
-@item -bt device:@var{dev}[,vlan=@var{n}]
-Emulate a bluetooth device @var{dev} and place it in network @var{n}
-(default @code{0}). QEMU can only emulate one type of bluetooth devices
-currently:
-
-@table @code
-@item keyboard
-Virtual wireless keyboard implementing the HIDP bluetooth profile.
-@end table
-
-@end table
-
-i386 target only:
-
-@table @option
-
-@item -win2k-hack
-Use it when installing Windows 2000 to avoid a disk full bug. After
-Windows 2000 is installed, you no longer need this option (this option
-slows down the IDE transfers).
-
-@item -rtc-td-hack
-Use it if you experience time drift problem in Windows with ACPI HAL.
-This option will try to figure out how many timer interrupts were not
-processed by the Windows guest and will re-inject them.
-
-@item -no-fd-bootchk
-Disable boot signature checking for floppy disks in Bochs BIOS. It may
-be needed to boot from old floppy disks.
-
-@item -no-acpi
-Disable ACPI (Advanced Configuration and Power Interface) support. Use
-it if your guest OS complains about ACPI problems (PC target machine
-only).
-
-@item -no-hpet
-Disable HPET support.
-
-@item -acpitable [sig=@var{str}][,rev=@var{n}][,oem_id=@var{str}][,oem_table_id=@var{str}][,oem_rev=@var{n}] [,asl_compiler_id=@var{str}][,asl_compiler_rev=@var{n}][,data=@var{file1}[:@var{file2}]...]
-Add ACPI table with specified header fields and context from specified files.
-
-@end table
-
-Linux boot specific: When using these options, you can use a given
-Linux kernel without installing it in the disk image. It can be useful
-for easier testing of various kernels.
-
-@table @option
-
-@item -kernel @var{bzImage}
-Use @var{bzImage} as kernel image.
-
-@item -append @var{cmdline}
-Use @var{cmdline} as kernel command line
-
-@item -initrd @var{file}
-Use @var{file} as initial ram disk.
-
-@end table
-
-Debug/Expert options:
-@table @option
-
-@item -serial @var{dev}
-Redirect the virtual serial port to host character device
-@var{dev}. The default device is @code{vc} in graphical mode and
-@code{stdio} in non graphical mode.
-
-This option can be used several times to simulate up to 4 serial
-ports.
-
-Use @code{-serial none} to disable all serial ports.
-
-Available character devices are:
-@table @code
-@item vc[:WxH]
-Virtual console. Optionally, a width and height can be given in pixel with
-@example
-vc:800x600
-@end example
-It is also possible to specify width or height in characters:
-@example
-vc:80Cx24C
-@end example
-@item pty
-[Linux only] Pseudo TTY (a new PTY is automatically allocated)
-@item none
-No device is allocated.
-@item null
-void device
-@item /dev/XXX
-[Linux only] Use host tty, e.g. @file{/dev/ttyS0}. The host serial port
-parameters are set according to the emulated ones.
-@item /dev/parport@var{N}
-[Linux only, parallel port only] Use host parallel port
-@var{N}. Currently SPP and EPP parallel port features can be used.
-@item file:@var{filename}
-Write output to @var{filename}. No character can be read.
-@item stdio
-[Unix only] standard input/output
-@item pipe:@var{filename}
-name pipe @var{filename}
-@item COM@var{n}
-[Windows only] Use host serial port @var{n}
-@item udp:[@var{remote_host}]:@var{remote_port}[@@[@var{src_ip}]:@var{src_port}]
-This implements UDP Net Console.
-When @var{remote_host} or @var{src_ip} are not specified
-they default to @code{0.0.0.0}.
-When not using a specified @var{src_port} a random port is automatically chosen.
-@item msmouse
-Three button serial mouse. Configure the guest to use Microsoft protocol.
-
-If you just want a simple readonly console you can use @code{netcat} or
-@code{nc}, by starting qemu with: @code{-serial udp::4555} and nc as:
-@code{nc -u -l -p 4555}. Any time qemu writes something to that port it
-will appear in the netconsole session.
-
-If you plan to send characters back via netconsole or you want to stop
-and start qemu a lot of times, you should have qemu use the same
-source port each time by using something like @code{-serial
-udp::4555@@:4556} to qemu. Another approach is to use a patched
-version of netcat which can listen to a TCP port and send and receive
-characters via udp. If you have a patched version of netcat which
-activates telnet remote echo and single char transfer, then you can
-use the following options to step up a netcat redirector to allow
-telnet on port 5555 to access the qemu port.
-@table @code
-@item Qemu Options:
--serial udp::4555@@:4556
-@item netcat options:
--u -P 4555 -L 0.0.0.0:4556 -t -p 5555 -I -T
-@item telnet options:
-localhost 5555
-@end table
-
-
-@item tcp:[@var{host}]:@var{port}[,@var{server}][,nowait][,nodelay]
-The TCP Net Console has two modes of operation. It can send the serial
-I/O to a location or wait for a connection from a location. By default
-the TCP Net Console is sent to @var{host} at the @var{port}. If you use
-the @var{server} option QEMU will wait for a client socket application
-to connect to the port before continuing, unless the @code{nowait}
-option was specified. The @code{nodelay} option disables the Nagle buffering
-algorithm. If @var{host} is omitted, 0.0.0.0 is assumed. Only
-one TCP connection at a time is accepted. You can use @code{telnet} to
-connect to the corresponding character device.
-@table @code
-@item Example to send tcp console to 192.168.0.2 port 4444
--serial tcp:192.168.0.2:4444
-@item Example to listen and wait on port 4444 for connection
--serial tcp::4444,server
-@item Example to not wait and listen on ip 192.168.0.100 port 4444
--serial tcp:192.168.0.100:4444,server,nowait
-@end table
-
-@item telnet:@var{host}:@var{port}[,server][,nowait][,nodelay]
-The telnet protocol is used instead of raw tcp sockets. The options
-work the same as if you had specified @code{-serial tcp}. The
-difference is that the port acts like a telnet server or client using
-telnet option negotiation. This will also allow you to send the
-MAGIC_SYSRQ sequence if you use a telnet that supports sending the break
-sequence. Typically in unix telnet you do it with Control-] and then
-type "send break" followed by pressing the enter key.
-
-@item unix:@var{path}[,server][,nowait]
-A unix domain socket is used instead of a tcp socket. The option works the
-same as if you had specified @code{-serial tcp} except the unix domain socket
-@var{path} is used for connections.
-
-@item mon:@var{dev_string}
-This is a special option to allow the monitor to be multiplexed onto
-another serial port. The monitor is accessed with key sequence of
-@key{Control-a} and then pressing @key{c}. See monitor access
-@ref{pcsys_keys} in the -nographic section for more keys.
-@var{dev_string} should be any one of the serial devices specified
-above. An example to multiplex the monitor onto a telnet server
-listening on port 4444 would be:
-@table @code
-@item -serial mon:telnet::4444,server,nowait
-@end table
-
-@item braille
-Braille device. This will use BrlAPI to display the braille output on a real
-or fake device.
-
-@end table
-
-@item -parallel @var{dev}
-Redirect the virtual parallel port to host device @var{dev} (same
-devices as the serial port). On Linux hosts, @file{/dev/parportN} can
-be used to use hardware devices connected on the corresponding host
-parallel port.
-
-This option can be used several times to simulate up to 3 parallel
-ports.
-
-Use @code{-parallel none} to disable all parallel ports.
-
-@item -monitor @var{dev}
-Redirect the monitor to host device @var{dev} (same devices as the
-serial port).
-The default device is @code{vc} in graphical mode and @code{stdio} in
-non graphical mode.
-
-@item -pidfile @var{file}
-Store the QEMU process PID in @var{file}. It is useful if you launch QEMU
-from a script.
-
-@item -S
-Do not start CPU at startup (you must type 'c' in the monitor).
-
-@item -s
-Wait gdb connection to port 1234 (@pxref{gdb_usage}).
-
-@item -p @var{port}
-Change gdb connection port. @var{port} can be either a decimal number
-to specify a TCP port, or a host device (same devices as the serial port).
-
-@item -d
-Output log in /tmp/qemu.log
-@item -hdachs @var{c},@var{h},@var{s},[,@var{t}]
-Force hard disk 0 physical geometry (1 <= @var{c} <= 16383, 1 <=
-@var{h} <= 16, 1 <= @var{s} <= 63) and optionally force the BIOS
-translation mode (@var{t}=none, lba or auto). Usually QEMU can guess
-all those parameters. This option is useful for old MS-DOS disk
-images.
-
-@item -L @var{path}
-Set the directory for the BIOS, VGA BIOS and keymaps.
-
-@item -bios @var{file}
-Set the filename for the BIOS.
-
-@item -kernel-kqemu
-Enable KQEMU full virtualization (default is user mode only).
-
-@item -no-kqemu
-Disable KQEMU kernel module usage. KQEMU options are only available if
-KQEMU support is enabled when compiling.
-
-@item -enable-kvm
-Enable KVM full virtualization support. This option is only available
-if KVM support is enabled when compiling.
-
-@item -no-reboot
-Exit instead of rebooting.
-
-@item -no-shutdown
-Don't exit QEMU on guest shutdown, but instead only stop the emulation.
-This allows for instance switching to monitor to commit changes to the
-disk image.
-
-@item -loadvm @var{file}
-Start right away with a saved state (@code{loadvm} in monitor)
-
-@item -daemonize
-Daemonize the QEMU process after initialization. QEMU will not detach from
-standard IO until it is ready to receive connections on any of its devices.
-This option is a useful way for external programs to launch QEMU without having
-to cope with initialization race conditions.
-
-@item -option-rom @var{file}
-Load the contents of @var{file} as an option ROM.
-This option is useful to load things like EtherBoot.
-
-@item -clock @var{method}
-Force the use of the given methods for timer alarm. To see what timers
-are available use -clock ?.
-
-@item -localtime
-Set the real time clock to local time (the default is to UTC
-time). This option is needed to have correct date in MS-DOS or
-Windows.
-
-@item -startdate @var{date}
-Set the initial date of the real time clock. Valid formats for
-@var{date} are: @code{now} or @code{2006-06-17T16:01:21} or
-@code{2006-06-17}. The default value is @code{now}.
-
-@item -icount [N|auto]
-Enable virtual instruction counter. The virtual cpu will execute one
-instruction every 2^N ns of virtual time. If @code{auto} is specified
-then the virtual cpu speed will be automatically adjusted to keep virtual
-time within a few seconds of real time.
-
-Note that while this option can give deterministic behavior, it does not
-provide cycle accurate emulation. Modern CPUs contain superscalar out of
-order cores with complex cache hierarchies. The number of instructions
-executed often has little or no correlation with actual performance.
-
-@item -echr numeric_ascii_value
-Change the escape character used for switching to the monitor when using
-monitor and serial sharing. The default is @code{0x01} when using the
-@code{-nographic} option. @code{0x01} is equal to pressing
-@code{Control-a}. You can select a different character from the ascii
-control keys where 1 through 26 map to Control-a through Control-z. For
-instance you could use the either of the following to change the escape
-character to Control-t.
-@table @code
-@item -echr 0x14
-@item -echr 20
-@end table
-
-@item -chroot dir
-Immediately before starting guest execution, chroot to the specified
-directory. Especially useful in combination with -runas.
-
-@item -runas user
-Immediately before starting guest execution, drop root privileges, switching
-to the specified user.
-
-@end table
+@include qemu-options.texi
@c man end
@c man begin OPTIONS
-During the graphical emulation, you can use the following keys:
+During the graphical emulation, you can use special key combinations to change
+modes. The default key mappings are shown below, but if you use @code{-alt-grab}
+then the modifier is Ctrl-Alt-Shift (instead of Ctrl-Alt) and if you use
+@code{-ctrl-grab} then the modifier is the right Ctrl key (instead of Ctrl-Alt):
+
@table @key
@item Ctrl-Alt-f
+@kindex Ctrl-Alt-f
Toggle full screen
+@item Ctrl-Alt-u
+@kindex Ctrl-Alt-u
+Restore the screen's un-scaled dimensions
+
@item Ctrl-Alt-n
+@kindex Ctrl-Alt-n
Switch to virtual console 'n'. Standard console mappings are:
@table @emph
@item 1
@end table
@item Ctrl-Alt
+@kindex Ctrl-Alt
Toggle mouse and keyboard grab.
@end table
+@kindex Ctrl-Up
+@kindex Ctrl-Down
+@kindex Ctrl-PageUp
+@kindex Ctrl-PageDown
In the virtual consoles, you can use @key{Ctrl-Up}, @key{Ctrl-Down},
@key{Ctrl-PageUp} and @key{Ctrl-PageDown} to move in the back log.
+@kindex Ctrl-a h
During emulation, if you are using the @option{-nographic} option, use
@key{Ctrl-a h} to get terminal commands:
@table @key
@item Ctrl-a h
+@kindex Ctrl-a h
@item Ctrl-a ?
+@kindex Ctrl-a ?
Print this help
@item Ctrl-a x
+@kindex Ctrl-a x
Exit emulator
@item Ctrl-a s
+@kindex Ctrl-a s
Save disk data back to file (if -snapshot)
@item Ctrl-a t
+@kindex Ctrl-a t
Toggle console timestamps
@item Ctrl-a b
+@kindex Ctrl-a b
Send break (magic sysrq in Linux)
@item Ctrl-a c
+@kindex Ctrl-a c
Switch between console and monitor
@item Ctrl-a Ctrl-a
+@kindex Ctrl-a a
Send Ctrl-a
@end table
@c man end
@node pcsys_monitor
@section QEMU Monitor
+@cindex QEMU monitor
The QEMU monitor is used to give complex commands to the QEMU
emulator. You can use it to:
The following commands are available:
-@table @option
-
-@item help or ? [@var{cmd}]
-Show the help for all commands or just for command @var{cmd}.
-
-@item commit
-Commit changes to the disk images (if -snapshot is used).
-
-@item info @var{subcommand}
-Show various information about the system state.
-
-@table @option
-@item info version
-show the version of QEMU
-@item info network
-show the various VLANs and the associated devices
-@item info chardev
-show the character devices
-@item info block
-show the block devices
-@item info block
-show block device statistics
-@item info registers
-show the cpu registers
-@item info cpus
-show infos for each CPU
-@item info history
-show the command line history
-@item info irq
-show the interrupts statistics (if available)
-@item info pic
-show i8259 (PIC) state
-@item info pci
-show emulated PCI device info
-@item info tlb
-show virtual to physical memory mappings (i386 only)
-@item info mem
-show the active virtual memory mappings (i386 only)
-@item info hpet
-show state of HPET (i386 only)
-@item info kqemu
-show KQEMU information
-@item info kvm
-show KVM information
-@item info usb
-show USB devices plugged on the virtual USB hub
-@item info usbhost
-show all USB host devices
-@item info profile
-show profiling information
-@item info capture
-show information about active capturing
-@item info snapshots
-show list of VM snapshots
-@item info status
-show the current VM status (running|paused)
-@item info pcmcia
-show guest PCMCIA status
-@item info mice
-show which guest mouse is receiving events
-@item info vnc
-show the vnc server status
-@item info name
-show the current VM name
-@item info uuid
-show the current VM UUID
-@item info cpustats
-show CPU statistics
-@item info slirp
-show SLIRP statistics (if available)
-@item info migrate
-show migration status
-@item info balloon
-show balloon information
-@end table
-
-@item q or quit
-Quit the emulator.
-
-@item eject [-f] @var{device}
-Eject a removable medium (use -f to force it).
-
-@item change @var{device} @var{setting}
-
-Change the configuration of a device.
-
-@table @option
-@item change @var{diskdevice} @var{filename} [@var{format}]
-Change the medium for a removable disk device to point to @var{filename}. eg
-
-@example
-(qemu) change ide1-cd0 /path/to/some.iso
-@end example
-
-@var{format} is optional.
-
-@item change vnc @var{display},@var{options}
-Change the configuration of the VNC server. The valid syntax for @var{display}
-and @var{options} are described at @ref{sec_invocation}. eg
-
-@example
-(qemu) change vnc localhost:1
-@end example
-
-@item change vnc password [@var{password}]
-
-Change the password associated with the VNC server. If the new password is not
-supplied, the monitor will prompt for it to be entered. VNC passwords are only
-significant up to 8 letters. eg
-
-@example
-(qemu) change vnc password
-Password: ********
-@end example
-
-@end table
-
-@item screendump @var{filename}
-Save screen into PPM image @var{filename}.
-
-@item logfile @var{filename}
-Output logs to @var{filename}.
-
-@item log @var{item1}[,...]
-Activate logging of the specified items to @file{/tmp/qemu.log}.
-
-@item savevm [@var{tag}|@var{id}]
-Create a snapshot of the whole virtual machine. If @var{tag} is
-provided, it is used as human readable identifier. If there is already
-a snapshot with the same tag or ID, it is replaced. More info at
-@ref{vm_snapshots}.
-
-@item loadvm @var{tag}|@var{id}
-Set the whole virtual machine to the snapshot identified by the tag
-@var{tag} or the unique snapshot ID @var{id}.
-
-@item delvm @var{tag}|@var{id}
-Delete the snapshot identified by @var{tag} or @var{id}.
-
-@item stop
-Stop emulation.
-
-@item c or cont
-Resume emulation.
-
-@item gdbserver [@var{port}]
-Start gdbserver session (default @var{port}=1234)
-
-@item x/fmt @var{addr}
-Virtual memory dump starting at @var{addr}.
-
-@item xp /@var{fmt} @var{addr}
-Physical memory dump starting at @var{addr}.
-
-@var{fmt} is a format which tells the command how to format the
-data. Its syntax is: @option{/@{count@}@{format@}@{size@}}
-
-@table @var
-@item count
-is the number of items to be dumped.
-
-@item format
-can be x (hex), d (signed decimal), u (unsigned decimal), o (octal),
-c (char) or i (asm instruction).
-
-@item size
-can be b (8 bits), h (16 bits), w (32 bits) or g (64 bits). On x86,
-@code{h} or @code{w} can be specified with the @code{i} format to
-respectively select 16 or 32 bit code instruction size.
-
-@end table
-
-Examples:
-@itemize
-@item
-Dump 10 instructions at the current instruction pointer:
-@example
-(qemu) x/10i $eip
-0x90107063: ret
-0x90107064: sti
-0x90107065: lea 0x0(%esi,1),%esi
-0x90107069: lea 0x0(%edi,1),%edi
-0x90107070: ret
-0x90107071: jmp 0x90107080
-0x90107073: nop
-0x90107074: nop
-0x90107075: nop
-0x90107076: nop
-@end example
-
-@item
-Dump 80 16 bit values at the start of the video memory.
-@smallexample
-(qemu) xp/80hx 0xb8000
-0x000b8000: 0x0b50 0x0b6c 0x0b65 0x0b78 0x0b38 0x0b36 0x0b2f 0x0b42
-0x000b8010: 0x0b6f 0x0b63 0x0b68 0x0b73 0x0b20 0x0b56 0x0b47 0x0b41
-0x000b8020: 0x0b42 0x0b69 0x0b6f 0x0b73 0x0b20 0x0b63 0x0b75 0x0b72
-0x000b8030: 0x0b72 0x0b65 0x0b6e 0x0b74 0x0b2d 0x0b63 0x0b76 0x0b73
-0x000b8040: 0x0b20 0x0b30 0x0b35 0x0b20 0x0b4e 0x0b6f 0x0b76 0x0b20
-0x000b8050: 0x0b32 0x0b30 0x0b30 0x0b33 0x0720 0x0720 0x0720 0x0720
-0x000b8060: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8070: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8080: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-0x000b8090: 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720 0x0720
-@end smallexample
-@end itemize
-
-@item p or print/@var{fmt} @var{expr}
-
-Print expression value. Only the @var{format} part of @var{fmt} is
-used.
-
-@item sendkey @var{keys}
-
-Send @var{keys} to the emulator. @var{keys} could be the name of the
-key or @code{#} followed by the raw value in either decimal or hexadecimal
-format. Use @code{-} to press several keys simultaneously. Example:
-@example
-sendkey ctrl-alt-f1
-@end example
-
-This command is useful to send keys that your graphical user interface
-intercepts at low level, such as @code{ctrl-alt-f1} in X Window.
-
-@item system_reset
-
-Reset the system.
-
-@item system_powerdown
-
-Power down the system (if supported).
-
-@item sum @var{addr} @var{size}
-
-Compute the checksum of a memory region.
-
-@item usb_add @var{devname}
-
-Add the USB device @var{devname}. For details of available devices see
-@ref{usb_devices}
-
-@item usb_del @var{devname}
-
-Remove the USB device @var{devname} from the QEMU virtual USB
-hub. @var{devname} has the syntax @code{bus.addr}. Use the monitor
-command @code{info usb} to see the devices you can remove.
-
-@item mouse_move @var{dx} @var{dy} [@var{dz}]
-Move the active mouse to the specified coordinates @var{dx} @var{dy}
-with optional scroll axis @var{dz}.
-
-@item mouse_button @var{val}
-Change the active mouse button state @var{val} (1=L, 2=M, 4=R).
-
-@item mouse_set @var{index}
-Set which mouse device receives events at given @var{index}, index
-can be obtained with
-@example
-info mice
-@end example
-
-@item wavcapture @var{filename} [@var{frequency} [@var{bits} [@var{channels}]]]
-Capture audio into @var{filename}. Using sample rate @var{frequency}
-bits per sample @var{bits} and number of channels @var{channels}.
-
-Defaults:
-@itemize @minus
-@item Sample rate = 44100 Hz - CD quality
-@item Bits = 16
-@item Number of channels = 2 - Stereo
-@end itemize
-
-@item stopcapture @var{index}
-Stop capture with a given @var{index}, index can be obtained with
-@example
-info capture
-@end example
-
-@item memsave @var{addr} @var{size} @var{file}
-save to disk virtual memory dump starting at @var{addr} of size @var{size}.
-
-@item pmemsave @var{addr} @var{size} @var{file}
-save to disk physical memory dump starting at @var{addr} of size @var{size}.
-
-@item boot_set @var{bootdevicelist}
-
-Define new values for the boot device list. Those values will override
-the values specified on the command line through the @code{-boot} option.
-
-The values that can be specified here depend on the machine type, but are
-the same that can be specified in the @code{-boot} command line option.
-
-@item nmi @var{cpu}
-Inject an NMI on the given CPU.
-
-@item migrate [-d] @var{uri}
-Migrate to @var{uri} (using -d to not wait for completion).
-
-@item migrate_cancel
-Cancel the current VM migration.
-
-@item migrate_set_speed @var{value}
-Set maximum speed to @var{value} (in bytes) for migrations.
-
-@item balloon @var{value}
-Request VM to change its memory allocation to @var{value} (in MB).
-
-@item set_link @var{name} [up|down]
-Set link @var{name} up or down.
-
-@end table
+@include qemu-monitor.texi
@subsection Integer expressions
* host_drives:: Using host drives
* disk_images_fat_images:: Virtual FAT disk images
* disk_images_nbd:: NBD access
+* disk_images_sheepdog:: Sheepdog disk images
@end menu
@node disk_images_quickstart
qemu linux2.img -hdb nbd:unix:/tmp/my_socket
@end example
+If the nbd-server uses named exports (since NBD 2.9.18), you must use the
+"exportname" option:
+@example
+qemu -cdrom nbd:localhost:exportname=debian-500-ppc-netinst
+qemu -cdrom nbd:localhost:exportname=openSUSE-11.1-ppc-netinst
+@end example
+
+@node disk_images_sheepdog
+@subsection Sheepdog disk images
+
+Sheepdog is a distributed storage system for QEMU. It provides highly
+available block level storage volumes that can be attached to
+QEMU-based virtual machines.
+
+You can create a Sheepdog disk image with the command:
+@example
+qemu-img create sheepdog:@var{image} @var{size}
+@end example
+where @var{image} is the Sheepdog image name and @var{size} is its
+size.
+
+To import the existing @var{filename} to Sheepdog, you can use a
+convert command.
+@example
+qemu-img convert @var{filename} sheepdog:@var{image}
+@end example
+
+You can boot from the Sheepdog disk image with the command:
+@example
+qemu sheepdog:@var{image}
+@end example
+
+You can also create a snapshot of the Sheepdog image like qcow2.
+@example
+qemu-img snapshot -c @var{tag} sheepdog:@var{image}
+@end example
+where @var{tag} is a tag name of the newly created snapshot.
+
+To boot from the Sheepdog snapshot, specify the tag name of the
+snapshot.
+@example
+qemu sheepdog:@var{image}:@var{tag}
+@end example
+
+You can create a cloned image from the existing snapshot.
+@example
+qemu-img create -b sheepdog:@var{base}:@var{tag} sheepdog:@var{image}
+@end example
+where @var{base} is a image name of the source snapshot and @var{tag}
+is its tag name.
+
+If the Sheepdog daemon doesn't run on the local host, you need to
+specify one of the Sheepdog servers to connect to.
+@example
+qemu-img create sheepdog:@var{hostname}:@var{port}:@var{image} @var{size}
+qemu sheepdog:@var{hostname}:@var{port}:@var{image}
+@end example
+
@node pcsys_network
@section Network emulation
that span several QEMU instances. See @ref{sec_invocation} to have a
basic example.
+@node pcsys_other_devs
+@section Other Devices
+
+@subsection Inter-VM Shared Memory device
+
+With KVM enabled on a Linux host, a shared memory device is available. Guests
+map a POSIX shared memory region into the guest as a PCI device that enables
+zero-copy communication to the application level of the guests. The basic
+syntax is:
+
+@example
+qemu -device ivshmem,size=<size in format accepted by -m>[,shm=<shm name>]
+@end example
+
+If desired, interrupts can be sent between guest VMs accessing the same shared
+memory region. Interrupt support requires using a shared memory server and
+using a chardev socket to connect to it. The code for the shared memory server
+is qemu.git/contrib/ivshmem-server. An example syntax when using the shared
+memory server is:
+
+@example
+qemu -device ivshmem,size=<size in format accepted by -m>[,chardev=<id>]
+ [,msi=on][,ioeventfd=on][,vectors=n][,role=peer|master]
+qemu -chardev socket,path=<path>,id=<id>
+@end example
+
+When using the server, the guest will be assigned a VM ID (>=0) that allows guests
+using the same server to communicate via interrupts. Guests can read their
+VM ID from a device register (see example code). Since receiving the shared
+memory region from the server is asynchronous, there is a (small) chance the
+guest may boot before the shared memory is attached. To allow an application
+to ensure shared memory is attached, the VM ID register will return -1 (an
+invalid VM ID) until the memory is attached. Once the shared memory is
+attached, the VM ID will return the guest's valid VM ID. With these semantics,
+the guest application can check to ensure the shared memory is attached to the
+guest before proceeding.
+
+The @option{role} argument can be set to either master or peer and will affect
+how the shared memory is migrated. With @option{role=master}, the guest will
+copy the shared memory on migration to the destination host. With
+@option{role=peer}, the guest will not be able to migrate with the device attached.
+With the @option{peer} case, the device should be detached and then reattached
+after migration using the PCI hotplug support.
+
@node direct_linux_boot
@section Direct Linux Boot
Serial converter. This emulates an FTDI FT232BM chip connected to host character
device @var{dev}. The available character devices are the same as for the
@code{-serial} option. The @code{vendorid} and @code{productid} options can be
-used to override the default 0403:6001. For instance,
+used to override the default 0403:6001. For instance,
@example
usb_add serial:productid=FA00:tcp:192.168.0.2:4444
@end example
The GNU TLS packages provides a command called @code{certtool} which can
be used to generate certificates and keys in PEM format. At a minimum it
-is neccessary to setup a certificate authority, and issue certificates to
+is necessary to setup a certificate authority, and issue certificates to
each server. If using certificates for authentication, then each client
will also need to be issued a certificate. The recommendation is for the
server to keep its certificates in either @code{/etc/pki/qemu} or for
For this to work the administrator of your KDC must generate a Kerberos
principal for the server, with a name of 'qemu/somehost.example.com@@EXAMPLE.COM'
replacing 'somehost.example.com' with the fully qualified host name of the
-machine running QEMU, and 'EXAMPLE.COM' with the Keberos Realm.
+machine running QEMU, and 'EXAMPLE.COM' with the Kerberos Realm.
Other configurations will be left as an exercise for the reader. It should
be noted that only Digest-MD5 and GSSAPI provides a SSF layer for data
differences are mentioned in the following sections.
@menu
-* QEMU PowerPC System emulator::
+* PowerPC System emulator::
* Sparc32 System emulator::
* Sparc64 System emulator::
* MIPS System emulator::
* ARM System emulator::
* ColdFire System emulator::
+* Cris System emulator::
+* Microblaze System emulator::
+* SH4 System emulator::
@end menu
-@node QEMU PowerPC System emulator
-@section QEMU PowerPC System emulator
+@node PowerPC System emulator
+@section PowerPC System emulator
+@cindex system emulation (PowerPC)
Use the executable @file{qemu-system-ppc} to simulate a complete PREP
or PowerMac PowerPC system.
@table @option
-@item -g WxH[xDEPTH]
+@item -g @var{W}x@var{H}[x@var{DEPTH}]
Set the initial VGA graphic mode. The default is 800x600x15.
-@item -prom-env string
+@item -prom-env @var{string}
Set OpenBIOS variables in NVRAM, for example:
@node Sparc32 System emulator
@section Sparc32 System emulator
+@cindex system emulation (Sparc32)
Use the executable @file{qemu-system-sparc} to simulate the following
Sun4m architecture machines:
@table @option
-@item -g WxHx[xDEPTH]
+@item -g @var{W}x@var{H}x[x@var{DEPTH}]
Set the initial TCX graphic mode. The default is 1024x768x8, currently
the only other possible mode is 1024x768x24.
-@item -prom-env string
+@item -prom-env @var{string}
Set OpenBIOS variables in NVRAM, for example:
-prom-env 'boot-device=sd(0,2,0):d' -prom-env 'boot-args=linux single'
@end example
-@item -M [SS-4|SS-5|SS-10|SS-20|SS-600MP|LX|Voyager|SPARCClassic|SPARCbook|SS-2|SS-1000|SS-2000]
+@item -M [SS-4|SS-5|SS-10|SS-20|SS-600MP|LX|Voyager|SPARCClassic] [|SPARCbook|SS-2|SS-1000|SS-2000]
Set the emulated machine type. Default is SS-5.
@node Sparc64 System emulator
@section Sparc64 System emulator
+@cindex system emulation (Sparc64)
Use the executable @file{qemu-system-sparc64} to simulate a Sun4u
(UltraSPARC PC-like machine), Sun4v (T1 PC-like machine), or generic
@table @option
-@item -prom-env string
+@item -prom-env @var{string}
Set OpenBIOS variables in NVRAM, for example:
@node MIPS System emulator
@section MIPS System emulator
+@cindex system emulation (MIPS)
Four executables cover simulation of 32 and 64-bit MIPS systems in
both endian options, @file{qemu-system-mips}, @file{qemu-system-mipsel}
@item
The Multi-I/O chip's serial device
@item
-PCnet32 PCI network card
+PCI network cards (PCnet32 and others)
@item
Malta FPGA serial device
@item
@node ARM System emulator
@section ARM System emulator
+@cindex system emulation (ARM)
Use the executable @file{qemu-system-arm} to simulate a ARM
machine. The ARM Integrator/CP board is emulated with the following
PL181 MultiMedia Card Interface with SD card.
@end itemize
-The ARM RealView Emulation baseboard is emulated with the following devices:
+Several variants of the ARM RealView baseboard are emulated,
+including the EB, PB-A8 and PBX-A9. Due to interactions with the
+bootloader, only certain Linux kernel configurations work out
+of the box on these boards.
+
+Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board
+should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET
+disabled and expect 1024M RAM.
+
+The following devices are emulated:
@itemize @minus
@item
-ARM926E, ARM1136, ARM11MPCORE(x4) or Cortex-A8 CPU
+ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU
@item
ARM AMBA Generic/Distributed Interrupt Controller
@item
Four PL011 UARTs
@item
-SMC 91c111 Ethernet adapter
+SMC 91c111 or SMSC LAN9118 Ethernet adapter
@item
PL110 LCD controller
@item
@item
Three OMAP on-chip UARTs and on-chip STI debugging console
@item
-A Bluetooth(R) transciever and HCI connected to an UART
+A Bluetooth(R) transceiver and HCI connected to an UART
@item
Mentor Graphics "Inventra" dual-role USB controller embedded in a TI
TUSB6010 chip - only USB host mode is supported
@item
MV88W8618 audio controller, WM8750 CODEC and mixer
@item
-128×64 display with brightness control
+128×64 display with brightness control
@item
2 buttons, 2 navigation wheels with button function
@end itemize
The Siemens SX1 models v1 and v2 (default) basic emulation.
-The emulaton includes the following elements:
+The emulation includes the following elements:
@itemize @minus
@item
Three on-chip UARTs
@end itemize
+The "Syborg" Symbian Virtual Platform base model includes the following
+elements:
+
+@itemize @minus
+@item
+ARM Cortex-A8 CPU
+@item
+Interrupt controller
+@item
+Timer
+@item
+Real Time Clock
+@item
+Keyboard
+@item
+Framebuffer
+@item
+Touchscreen
+@item
+UARTs
+@end itemize
+
A Linux 2.6 test image is available on the QEMU web site. More
information is available in the QEMU mailing-list archive.
@node ColdFire System emulator
@section ColdFire System emulator
+@cindex system emulation (ColdFire)
+@cindex system emulation (M68K)
Use the executable @file{qemu-system-m68k} to simulate a ColdFire machine.
The emulator is able to boot a uClinux kernel.
@c man begin OPTIONS
-The following options are specific to the ARM emulation:
+The following options are specific to the ColdFire emulation:
@table @option
@end table
+@node Cris System emulator
+@section Cris System emulator
+@cindex system emulation (Cris)
+
+TODO
+
+@node Microblaze System emulator
+@section Microblaze System emulator
+@cindex system emulation (Microblaze)
+
+TODO
+
+@node SH4 System emulator
+@section SH4 System emulator
+@cindex system emulation (SH4)
+
+TODO
+
@node QEMU User space emulator
@chapter QEMU User space emulator
@example
qemu-i386 tests/i386/ls
@end example
-You can look at @file{qemu-binfmt-conf.sh} so that
+You can look at @file{scripts/qemu-binfmt-conf.sh} so that
QEMU is automatically launched by the Linux kernel when you try to
launch x86 executables. It requires the @code{binfmt_misc} module in the
Linux kernel.
@subsection Command line options
@example
-usage: qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] program [arguments...]
+usage: qemu-i386 [-h] [-d] [-L path] [-s size] [-cpu model] [-g port] [-B offset] [-R size] program [arguments...]
@end example
@table @option
Set the x86 stack size in bytes (default=524288)
@item -cpu model
Select CPU model (-cpu ? for list and additional feature selection)
+@item -ignore-environment
+Start with an empty environment. Without this option,
+the initial environment is a copy of the caller's environment.
+@item -E @var{var}=@var{value}
+Set environment @var{var} to @var{value}.
+@item -U @var{var}
+Remove @var{var} from the environment.
+@item -B offset
+Offset guest address by the specified number of bytes. This is useful when
+the address region required by guest applications is reserved on the host.
+This option is currently only supported on some hosts.
+@item -R size
+Pre-allocate a guest virtual address space of the given size (in bytes).
+"G", "M", and "k" suffixes may be used when specifying the size.
@end table
Debug options:
Act as if the host page size was 'pagesize' bytes
@item -g port
Wait gdb connection to port
+@item -singlestep
+Run the emulation in single step mode.
@end table
Environment variables:
@node Other binaries
@subsection Other binaries
+@cindex user mode (Alpha)
+@command{qemu-alpha} TODO.
+
+@cindex user mode (ARM)
+@command{qemu-armeb} TODO.
+
+@cindex user mode (ARM)
@command{qemu-arm} is also capable of running ARM "Angel" semihosted ELF
binaries (as implemented by the arm-elf and arm-eabi Newlib/GDB
configurations), and arm-uclinux bFLT format binaries.
+@cindex user mode (ColdFire)
+@cindex user mode (M68K)
@command{qemu-m68k} is capable of running semihosted binaries using the BDM
(m5xxx-ram-hosted.ld) or m68k-sim (sim.ld) syscall interfaces, and
coldfire uClinux bFLT format binaries.
The binary format is detected automatically.
+@cindex user mode (Cris)
+@command{qemu-cris} TODO.
+
+@cindex user mode (i386)
+@command{qemu-i386} TODO.
+@command{qemu-x86_64} TODO.
+
+@cindex user mode (Microblaze)
+@command{qemu-microblaze} TODO.
+
+@cindex user mode (MIPS)
+@command{qemu-mips} TODO.
+@command{qemu-mipsel} TODO.
+
+@cindex user mode (PowerPC)
+@command{qemu-ppc64abi32} TODO.
+@command{qemu-ppc64} TODO.
+@command{qemu-ppc} TODO.
+
+@cindex user mode (SH4)
+@command{qemu-sh4eb} TODO.
+@command{qemu-sh4} TODO.
+
+@cindex user mode (SPARC)
@command{qemu-sparc} can execute Sparc32 binaries (Sparc32 CPU, 32 bit ABI).
@command{qemu-sparc32plus} can execute Sparc32 and SPARC32PLUS binaries
Activate log (logfile=/tmp/qemu.log)
@item -p pagesize
Act as if the host page size was 'pagesize' bytes
+@item -singlestep
+Run the emulation in single step mode.
@end table
@node BSD User space emulator
Set the library root path (default=/)
@item -s size
Set the stack size in bytes (default=524288)
+@item -ignore-environment
+Start with an empty environment. Without this option,
+the initial environment is a copy of the caller's environment.
+@item -E @var{var}=@var{value}
+Set environment @var{var} to @var{value}.
+@item -U @var{var}
+Remove @var{var} from the environment.
@item -bsd type
Set the type of the emulated BSD Operating system. Valid values are
FreeBSD, NetBSD and OpenBSD (default).
Activate log (logfile=/tmp/qemu.log)
@item -p pagesize
Act as if the host page size was 'pagesize' bytes
+@item -singlestep
+Run the emulation in single step mode.
@end table
@node compilation
* Windows::
* Cross compilation for Windows with Linux::
* Mac OS X::
+* Make targets::
@end menu
@node Linux/Unix
@end example
to install QEMU in @file{/usr/local}.
-@subsection GCC version
-
-In order to compile QEMU successfully, it is very important that you
-have the right tools. The most important one is gcc. On most hosts and
-in particular on x86 ones, @emph{gcc 4.x is not supported}. If your
-Linux distribution includes a gcc 4.x compiler, you can usually
-install an older version (it is invoked by @code{gcc32} or
-@code{gcc34}). The QEMU configure script automatically probes for
-these older versions so that usually you don't have to do anything.
-
@node Windows
@section Windows
@item Download
the MinGW development library of SDL 1.2.x
(@file{SDL-devel-1.2.x-@/mingw32.tar.gz}) from
-@url{http://www.libsdl.org}. Unpack it in a temporary place, and
-unpack the archive @file{i386-mingw32msvc.tar.gz} in the MinGW tool
-directory. Edit the @file{sdl-config} script so that it gives the
+@url{http://www.libsdl.org}. Unpack it in a temporary place and
+edit the @file{sdl-config} script so that it gives the
correct SDL directory when invoked.
+@item Install the MinGW version of zlib and make sure
+@file{zlib.h} and @file{libz.dll.a} are in
+MinGW's default header and linker search paths.
+
@item Extract the current version of QEMU.
@item Start the MSYS shell (file @file{msys.bat}).
Install the MinGW cross compilation tools available at
@url{http://www.mingw.org/}.
-@item
-Install the Win32 version of SDL (@url{http://www.libsdl.org}) by
-unpacking @file{i386-mingw32msvc.tar.gz}. Set up the PATH environment
-variable so that @file{i386-mingw32msvc-sdl-config} can be launched by
+@item Download
+the MinGW development library of SDL 1.2.x
+(@file{SDL-devel-1.2.x-@/mingw32.tar.gz}) from
+@url{http://www.libsdl.org}. Unpack it in a temporary place and
+edit the @file{sdl-config} script so that it gives the
+correct SDL directory when invoked. Set up the @code{PATH} environment
+variable so that @file{sdl-config} can be launched by
the QEMU configuration script.
+@item Install the MinGW version of zlib and make sure
+@file{zlib.h} and @file{libz.dll.a} are in
+MinGW's default header and linker search paths.
+
@item
Configure QEMU for Windows cross compilation:
@example
-./configure --enable-mingw32
+PATH=/usr/i686-pc-mingw32/sys-root/mingw/bin:$PATH ./configure --cross-prefix='i686-pc-mingw32-'
+@end example
+The example assumes @file{sdl-config} is installed under @file{/usr/i686-pc-mingw32/sys-root/mingw/bin} and
+MinGW cross compilation tools have names like @file{i686-pc-mingw32-gcc} and @file{i686-pc-mingw32-strip}.
+We set the @code{PATH} environment variable to ensure the MinGW version of @file{sdl-config} is used and
+use --cross-prefix to specify the name of the cross compiler.
+You can also use --prefix to set the Win32 install path which defaults to @file{c:/Program Files/Qemu}.
+
+Under Fedora Linux, you can run:
+@example
+yum -y install mingw32-gcc mingw32-SDL mingw32-zlib
@end example
-If necessary, you can change the cross-prefix according to the prefix
-chosen for the MinGW tools with --cross-prefix. You can also use
---prefix to set the Win32 install path.
+to get a suitable cross compilation environment.
@item You can install QEMU in the installation directory by typing
-@file{make install}. Don't forget to copy @file{SDL.dll} in the
+@code{make install}. Don't forget to copy @file{SDL.dll} and @file{zlib1.dll} into the
installation directory.
@end itemize
-Note: Currently, Wine does not seem able to launch
-QEMU for Win32.
+Wine can be used to launch the resulting qemu.exe compiled for Win32.
@node Mac OS X
@section Mac OS X
at the QEMU mailing list archive to have all the necessary
information.
+@node Make targets
+@section Make targets
+
+@table @code
+
+@item make
+@item make all
+Make everything which is typically needed.
+
+@item install
+TODO
+
+@item install-doc
+TODO
+
+@item make clean
+Remove most files which were built during make.
+
+@item make distclean
+Remove everything which was built during make.
+
+@item make dvi
+@item make html
+@item make info
+@item make pdf
+Create documentation in dvi, html, info or pdf format.
+
+@item make cscope
+TODO
+
+@item make defconfig
+(Re-)create some build configuration files.
+User made changes will be overwritten.
+
+@item tar
+@item tarbin
+TODO
+
+@end table
+
+@node License
+@appendix License
+
+QEMU is a trademark of Fabrice Bellard.
+
+QEMU is released under the GNU General Public License (TODO: add link).
+Parts of QEMU have specific licenses, see file LICENSE.
+
+TODO (refer to file LICENSE, include it, include the GPL?)
+
@node Index
-@chapter Index
+@appendix Index
+@menu
+* Concept Index::
+* Function Index::
+* Keystroke Index::
+* Program Index::
+* Data Type Index::
+* Variable Index::
+@end menu
+
+@node Concept Index
+@section Concept Index
+This is the main index. Should we combine all keywords in one index? TODO
@printindex cp
+@node Function Index
+@section Function Index
+This index could be used for command line options and monitor functions.
+@printindex fn
+
+@node Keystroke Index
+@section Keystroke Index
+
+This is a list of all keystrokes which have a special function
+in system emulation.
+
+@printindex ky
+
+@node Program Index
+@section Program Index
+@printindex pg
+
+@node Data Type Index
+@section Data Type Index
+
+This index could be used for qdev device names and options.
+
+@printindex tp
+
+@node Variable Index
+@section Variable Index
+@printindex vr
+
@bye
projects / qemu.git / blobdiff