Once you ensured that your hardware supports passthrough, you will need to do
some configuration to enable PCI(e) passthrough.
-
.IOMMU
-The IOMMU has to be activated on the
-xref:sysboot_edit_kernel_cmdline[kernel commandline].
+First, you have to enable IOMMU support in your BIOS/UEFI. Usually the
+corresponding setting is called `IOMMU` or `VT-d`,but you should find the exact
+option name in the manual of your motherboard.
-The command line parameters are:
+For Intel CPUs, you may also need to enable the IOMMU on the
+xref:sysboot_edit_kernel_cmdline[kernel command line] for older (pre-5.15)
+kernels by adding:
-* for Intel CPUs:
-+
----
intel_iommu=on
----
-* for AMD CPUs:
-+
+
+For AMD CPUs it should be enabled automatically.
+
+.IOMMU Passthrough Mode
+
+If your hardware supports IOMMU passthrough mode, enabling this mode might
+increase performance.
+This is because VMs then bypass the (default) DMA translation normally
+performed by the hyper-visor and instead pass DMA requests directly to the
+hardware IOMMU. To enable these options, add:
+
----
- amd_iommu=on
+ iommu=pt
----
+to the xref:sysboot_edit_kernel_cmdline[kernel commandline].
.Kernel Modules
----
If your device has multiple functions (e.g., ``00:02.0`' and ``00:02.1`' ),
-you can pass them through all together with the shortened syntax ``00:02`'
+you can pass them through all together with the shortened syntax ``00:02`'.
+This is equivalent with checking the ``All Functions`' checkbox in the
+web-interface.
There are some options to which may be necessary, depending on the device
and guest OS:
# qm set VMID -hostpci0 02:00,pcie=on,x-vga=on
----
+.PCI ID overrides
+
+You can override the PCI vendor ID, device ID, and subsystem IDs that will be
+seen by the guest. This is useful if your device is a variant with an ID that
+your guest's drivers don't recognize, but you want to force those drivers to be
+loaded anyway (e.g. if you know your device shares the same chipset as a
+supported variant).
+
+The available options are `vendor-id`, `device-id`, `sub-vendor-id`, and
+`sub-device-id`. You can set any or all of these to override your device's
+default IDs.
+
+For example:
+
+----
+# qm set VMID -hostpci0 02:00,device-id=0x10f6,sub-vendor-id=0x0000
+----
+
Other considerations
^^^^^^^^^^^^^^^^^^^^
Mediated devices are another method to reuse features and performance from
physical hardware for virtualized hardware. These are found most common in
-virtualized GPU setups such as Intels GVT-g and Nvidias vGPUs used in their
+virtualized GPU setups such as Intel's GVT-g and NVIDIA's vGPUs used in their
GRID technology.
With this, a physical Card is able to create virtual cards, similar to SR-IOV.
not work. So please refer to your vendor for compatible drivers and how to
configure them.
-Intels drivers for GVT-g are integrated in the Kernel and should work
+Intel's drivers for GVT-g are integrated in the Kernel and should work
with 5th, 6th and 7th generation Intel Core Processors, as well as E3 v4, E3
v5 and E3 v6 Xeon Processors.