#include "config.h"
#include "qemu-common.h"
#include "mips-defs.h"
-#include "cpu-defs.h"
-#include "softfloat.h"
+#include "exec/cpu-defs.h"
+#include "fpu/softfloat.h"
struct CPUMIPSState;
struct CPUMIPSTLBContext {
uint32_t nb_tlb;
uint32_t tlb_in_use;
- int (*map_address) (struct CPUMIPSState *env, target_phys_addr_t *physical, int *prot, target_ulong address, int rw, int access_type);
- void (*helper_tlbwi) (void);
- void (*helper_tlbwr) (void);
- void (*helper_tlbp) (void);
- void (*helper_tlbr) (void);
+ int (*map_address) (struct CPUMIPSState *env, hwaddr *physical, int *prot, target_ulong address, int rw, int access_type);
+ void (*helper_tlbwi)(struct CPUMIPSState *env);
+ void (*helper_tlbwr)(struct CPUMIPSState *env);
+ void (*helper_tlbp)(struct CPUMIPSState *env);
+ void (*helper_tlbr)(struct CPUMIPSState *env);
union {
struct {
r4k_tlb_t tlb[MIPS_TLB_MAX];
int error_code;
uint32_t hflags; /* CPU State */
/* TMASK defines different execution modes */
-#define MIPS_HFLAG_TMASK 0x007FF
+#define MIPS_HFLAG_TMASK 0xC07FF
#define MIPS_HFLAG_MODE 0x00007 /* execution modes */
/* The KSU flags must be the lowest bits in hflags. The flag order
must be the same as defined for CP0 Status. This allows to use
#define MIPS_HFLAG_BDS32 0x10000 /* branch requires 32-bit delay slot */
#define MIPS_HFLAG_BX 0x20000 /* branch exchanges execution mode */
#define MIPS_HFLAG_BMASK (MIPS_HFLAG_BMASK_BASE | MIPS_HFLAG_BMASK_EXT)
+ /* MIPS DSP resources access. */
+#define MIPS_HFLAG_DSP 0x40000 /* Enable access to MIPS DSP resources. */
+#define MIPS_HFLAG_DSPR2 0x80000 /* Enable access to MIPS DSPR2 resources. */
target_ulong btarget; /* Jump / branch target */
target_ulong bcond; /* Branch condition (if needed) */
#include "cpu-qom.h"
#if !defined(CONFIG_USER_ONLY)
-int no_mmu_map_address (CPUMIPSState *env, target_phys_addr_t *physical, int *prot,
+int no_mmu_map_address (CPUMIPSState *env, hwaddr *physical, int *prot,
target_ulong address, int rw, int access_type);
-int fixed_mmu_map_address (CPUMIPSState *env, target_phys_addr_t *physical, int *prot,
+int fixed_mmu_map_address (CPUMIPSState *env, hwaddr *physical, int *prot,
target_ulong address, int rw, int access_type);
-int r4k_map_address (CPUMIPSState *env, target_phys_addr_t *physical, int *prot,
+int r4k_map_address (CPUMIPSState *env, hwaddr *physical, int *prot,
target_ulong address, int rw, int access_type);
-void r4k_helper_tlbwi (void);
-void r4k_helper_tlbwr (void);
-void r4k_helper_tlbp (void);
-void r4k_helper_tlbr (void);
+void r4k_helper_tlbwi(CPUMIPSState *env);
+void r4k_helper_tlbwr(CPUMIPSState *env);
+void r4k_helper_tlbp(CPUMIPSState *env);
+void r4k_helper_tlbr(CPUMIPSState *env);
-void cpu_unassigned_access(CPUMIPSState *env, target_phys_addr_t addr,
+void cpu_unassigned_access(CPUMIPSState *env, hwaddr addr,
int is_write, int is_exec, int unused, int size);
#endif
void mips_cpu_list (FILE *f, fprintf_function cpu_fprintf);
-#define cpu_init cpu_mips_init
#define cpu_exec cpu_mips_exec
#define cpu_gen_code cpu_mips_gen_code
#define cpu_signal_handler cpu_mips_signal_handler
return r;
}
-#include "cpu-all.h"
+#include "exec/cpu-all.h"
/* Memory access type :
* may be needed for precise access rights control and precise exceptions.
EXCP_MDMX,
EXCP_C2E,
EXCP_CACHE, /* 32 */
+ EXCP_DSPDIS,
- EXCP_LAST = EXCP_CACHE,
+ EXCP_LAST = EXCP_DSPDIS,
};
/* Dummy exception for conditional stores. */
#define EXCP_SC 0x100
#define CPU_INTERRUPT_WAKE CPU_INTERRUPT_TGT_INT_0
int cpu_mips_exec(CPUMIPSState *s);
-CPUMIPSState *cpu_mips_init(const char *cpu_model);
-//~ uint32_t cpu_mips_get_clock (void);
+MIPSCPU *cpu_mips_init(const char *cpu_model);
int cpu_mips_signal_handler(int host_signum, void *pinfo, void *puc);
+static inline CPUMIPSState *cpu_init(const char *cpu_model)
+{
+ MIPSCPU *cpu = cpu_mips_init(cpu_model);
+ if (cpu == NULL) {
+ return NULL;
+ }
+ return &cpu->env;
+}
+
+/* TODO QOM'ify CPU reset and remove */
+void cpu_state_reset(CPUMIPSState *s);
+
/* mips_timer.c */
uint32_t cpu_mips_get_random (CPUMIPSState *env);
uint32_t cpu_mips_get_count (CPUMIPSState *env);
void do_interrupt (CPUMIPSState *env);
#if !defined(CONFIG_USER_ONLY)
void r4k_invalidate_tlb (CPUMIPSState *env, int idx, int use_extra);
-target_phys_addr_t cpu_mips_translate_address (CPUMIPSState *env, target_ulong address,
+hwaddr cpu_mips_translate_address (CPUMIPSState *env, target_ulong address,
int rw);
#endif
return active;
}
-static inline int cpu_has_work(CPUMIPSState *env)
+static inline bool cpu_has_work(CPUState *cpu)
{
- int has_work = 0;
+ CPUMIPSState *env = &MIPS_CPU(cpu)->env;
+ bool has_work = false;
/* It is implementation dependent if non-enabled interrupts
wake-up the CPU, however most of the implementations only
check for interrupts that can be taken. */
if ((env->interrupt_request & CPU_INTERRUPT_HARD) &&
cpu_mips_hw_interrupts_pending(env)) {
- has_work = 1;
+ has_work = true;
}
/* MIPS-MT has the ability to halt the CPU. */
/* The QEMU model will issue an _WAKE request whenever the CPUs
should be woken up. */
if (env->interrupt_request & CPU_INTERRUPT_WAKE) {
- has_work = 1;
+ has_work = true;
}
if (!mips_vpe_active(env)) {
- has_work = 0;
+ has_work = false;
}
}
return has_work;
}
-#include "exec-all.h"
+#include "exec/exec-all.h"
static inline void cpu_pc_from_tb(CPUMIPSState *env, TranslationBlock *tb)
{
env->hflags |= tb->flags & MIPS_HFLAG_BMASK;
}
+static inline void compute_hflags(CPUMIPSState *env)
+{
+ env->hflags &= ~(MIPS_HFLAG_COP1X | MIPS_HFLAG_64 | MIPS_HFLAG_CP0 |
+ MIPS_HFLAG_F64 | MIPS_HFLAG_FPU | MIPS_HFLAG_KSU |
+ MIPS_HFLAG_UX | MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2);
+ if (!(env->CP0_Status & (1 << CP0St_EXL)) &&
+ !(env->CP0_Status & (1 << CP0St_ERL)) &&
+ !(env->hflags & MIPS_HFLAG_DM)) {
+ env->hflags |= (env->CP0_Status >> CP0St_KSU) & MIPS_HFLAG_KSU;
+ }
+#if defined(TARGET_MIPS64)
+ if (((env->hflags & MIPS_HFLAG_KSU) != MIPS_HFLAG_UM) ||
+ (env->CP0_Status & (1 << CP0St_PX)) ||
+ (env->CP0_Status & (1 << CP0St_UX))) {
+ env->hflags |= MIPS_HFLAG_64;
+ }
+ if (env->CP0_Status & (1 << CP0St_UX)) {
+ env->hflags |= MIPS_HFLAG_UX;
+ }
+#endif
+ if ((env->CP0_Status & (1 << CP0St_CU0)) ||
+ !(env->hflags & MIPS_HFLAG_KSU)) {
+ env->hflags |= MIPS_HFLAG_CP0;
+ }
+ if (env->CP0_Status & (1 << CP0St_CU1)) {
+ env->hflags |= MIPS_HFLAG_FPU;
+ }
+ if (env->CP0_Status & (1 << CP0St_FR)) {
+ env->hflags |= MIPS_HFLAG_F64;
+ }
+ if (env->insn_flags & ASE_DSPR2) {
+ /* Enables access MIPS DSP resources, now our cpu is DSP ASER2,
+ so enable to access DSPR2 resources. */
+ if (env->CP0_Status & (1 << CP0St_MX)) {
+ env->hflags |= MIPS_HFLAG_DSP | MIPS_HFLAG_DSPR2;
+ }
+
+ } else if (env->insn_flags & ASE_DSP) {
+ /* Enables access MIPS DSP resources, now our cpu is DSP ASE,
+ so enable to access DSP resources. */
+ if (env->CP0_Status & (1 << CP0St_MX)) {
+ env->hflags |= MIPS_HFLAG_DSP;
+ }
+
+ }
+ if (env->insn_flags & ISA_MIPS32R2) {
+ if (env->active_fpu.fcr0 & (1 << FCR0_F64)) {
+ env->hflags |= MIPS_HFLAG_COP1X;
+ }
+ } else if (env->insn_flags & ISA_MIPS32) {
+ if (env->hflags & MIPS_HFLAG_64) {
+ env->hflags |= MIPS_HFLAG_COP1X;
+ }
+ } else if (env->insn_flags & ISA_MIPS4) {
+ /* All supported MIPS IV CPUs use the XX (CU3) to enable
+ and disable the MIPS IV extensions to the MIPS III ISA.
+ Some other MIPS IV CPUs ignore the bit, so the check here
+ would be too restrictive for them. */
+ if (env->CP0_Status & (1 << CP0St_CU3)) {
+ env->hflags |= MIPS_HFLAG_COP1X;
+ }
+ }
+}
+
#endif /* !defined (__MIPS_CPU_H__) */
projects / qemu.git / blobdiff