for cross compiling, it is assumed that the TCG target is different
from the host, although it is never the case for QEMU.
+In this document, we use "guest" to specify what architecture we are
+emulating; "target" always means the TCG target, the machine on which
+we are running QEMU.
+
A TCG "function" corresponds to a QEMU Translated Block (TB).
A TCG "temporary" is a variable only live in a basic
* Helpers:
Using the tcg_gen_helper_x_y it is possible to call any function
-taking i32, i64 or pointer types. Before calling an helper, all
-globals are stored at their canonical location and it is assumed that
-the function can modify them. In the future, function modifiers will
-be allowed to tell that the helper does not read or write some globals.
+taking i32, i64 or pointer types. By default, before calling a helper,
+all globals are stored at their canonical location and it is assumed
+that the function can modify them. By default, the helper is allowed to
+modify the CPU state or raise an exception.
+
+This can be overridden using the following function modifiers:
+- TCG_CALL_NO_READ_GLOBALS means that the helper does not read globals,
+ either directly or via an exception. They will not be saved to their
+ canonical locations before calling the helper.
+- TCG_CALL_NO_WRITE_GLOBALS means that the helper does not modify any globals.
+ They will only be saved to their canonical location before calling helpers,
+ but they won't be reloaded afterwise.
+- TCG_CALL_NO_SIDE_EFFECTS means that the call to the function is removed if
+ the return value is not used.
+
+Note that TCG_CALL_NO_READ_GLOBALS implies TCG_CALL_NO_WRITE_GLOBALS.
On some TCG targets (e.g. x86), several calling conventions are
supported.
* Branches:
-Use the instruction 'br' to jump to a label. Use 'jmp' to jump to an
-explicit address. Conditional branches can only jump to labels.
+Use the instruction 'br' to jump to a label.
3.3) Code Optimizations
********* Jumps/Labels
-* jmp t0
-
-Absolute jump to address t0 (pointer type).
-
* set_label $label
Define label 'label' at the current program point.
Jump to label.
-* brcond_i32/i64 cond, t0, t1, label
+* brcond_i32/i64 t0, t1, cond, label
Conditional jump if t0 cond t1 is true. cond can be:
TCG_COND_EQ
* eqv_i32/i64 t0, t1, t2
-t0=~(t1^t2)
+t0=~(t1^t2), or equivalently, t0=t1^~t2
* nand_i32/i64 t0, t1, t2
* bswap16_i32/i64 t0, t1
-16 bit byte swap on a 32/64 bit value. The two/six high order bytes must be
-set to zero.
+16 bit byte swap on a 32/64 bit value. It assumes that the two/six high order
+bytes are set to zero.
* bswap32_i32/i64 t0, t1
-32 bit byte swap on a 32/64 bit value. With a 64 bit value, the four high
-order bytes must be set to zero.
+32 bit byte swap on a 32/64 bit value. With a 64 bit value, it assumes that
+the four high order bytes are set to zero.
* bswap64_i64 t0, t1
Indicate that the value of t0 won't be used later. It is useful to
force dead code elimination.
+* deposit_i32/i64 dest, t1, t2, pos, len
+
+Deposit T2 as a bitfield into T1, placing the result in DEST.
+The bitfield is described by POS/LEN, which are immediate values:
+
+ LEN - the length of the bitfield
+ POS - the position of the first bit, counting from the LSB
+
+For example, pos=8, len=4 indicates a 4-bit field at bit 8.
+This operation would be equivalent to
+
+ dest = (t1 & ~0x0f00) | ((t2 << 8) & 0x0f00)
+
+
********* Conditional moves
-* setcond_i32/i64 cond, dest, t1, t2
+* setcond_i32/i64 dest, t1, t2, cond
dest = (t1 cond t2)
Set DEST to 1 if (T1 cond T2) is true, otherwise set to 0.
+* movcond_i32/i64 dest, c1, c2, v1, v2, cond
+
+dest = (c1 cond c2 ? v1 : v2)
+
+Set DEST to V1 if (C1 cond C2) is true, otherwise set to V2.
+
********* Type conversions
* ext_i32_i64 t0, t1
write(t0, t1 + offset)
Write 8, 16, 32 or 64 bits to host memory.
-********* 64-bit target on 32-bit host support
+All this opcodes assume that the pointed host memory doesn't correspond
+to a global. In the latter case the behaviour is unpredictable.
+
+********* Multiword arithmetic support
+
+* add2_i32/i64 t0_low, t0_high, t1_low, t1_high, t2_low, t2_high
+* sub2_i32/i64 t0_low, t0_high, t1_low, t1_high, t2_low, t2_high
+
+Similar to add/sub, except that the double-word inputs T1 and T2 are
+formed from two single-word arguments, and the double-word output T0
+is returned in two single-word outputs.
+
+* mulu2_i32/i64 t0_low, t0_high, t1, t2
+
+Similar to mul, except two unsigned inputs T1 and T2 yielding the full
+double-word product T0. The later is returned in two single-word outputs.
+
+* muls2_i32/i64 t0_low, t0_high, t1, t2
+
+Similar to mulu2, except the two inputs T1 and T2 are signed.
+
+********* 64-bit guest on 32-bit host support
The following opcodes are internal to TCG. Thus they are to be implemented by
32-bit host code generators, but are not to be emitted by guest translators.
They are emitted as needed by inline functions within "tcg-op.h".
-* brcond2_i32 cond, t0_low, t0_high, t1_low, t1_high, label
+* brcond2_i32 t0_low, t0_high, t1_low, t1_high, cond, label
Similar to brcond, except that the 64-bit values T0 and T1
are formed from two 32-bit arguments.
-* add2_i32 t0_low, t0_high, t1_low, t1_high, t2_low, t2_high
-* sub2_i32 t0_low, t0_high, t1_low, t1_high, t2_low, t2_high
-
-Similar to add/sub, except that the 64-bit inputs T1 and T2 are
-formed from two 32-bit arguments, and the 64-bit output T0
-is returned in two 32-bit outputs.
-
-* mulu2_i32 t0_low, t0_high, t1, t2
-
-Similar to mul, except two 32-bit (unsigned) inputs T1 and T2 yielding
-the full 64-bit product T0. The later is returned in two 32-bit outputs.
-
-* setcond2_i32 cond, dest, t1_low, t1_high, t2_low, t2_high
+* setcond2_i32 dest, t1_low, t1_high, t2_low, t2_high, cond
Similar to setcond, except that the 64-bit values T1 and T2 are
formed from two 32-bit arguments. The result is a 32-bit value.
********* QEMU specific operations
-* tb_exit t0
+* exit_tb t0
Exit the current TB and return the value t0 (word type).
Exit the current TB and jump to the TB index 'index' (constant) if the
current TB was linked to this TB. Otherwise execute the next
-instructions.
+instructions. Only indices 0 and 1 are valid and tcg_gen_goto_tb may be issued
+at most once with each slot index per TB.
-* qemu_ld8u t0, t1, flags
-qemu_ld8s t0, t1, flags
-qemu_ld16u t0, t1, flags
-qemu_ld16s t0, t1, flags
-qemu_ld32u t0, t1, flags
-qemu_ld32s t0, t1, flags
-qemu_ld64 t0, t1, flags
+* qemu_ld_i32/i64 t0, t1, flags, memidx
+* qemu_st_i32/i64 t0, t1, flags, memidx
-Load data at the QEMU CPU address t1 into t0. t1 has the QEMU CPU
-address type. 'flags' contains the QEMU memory index (selects user or
-kernel access) for example.
+Load data at the guest address t1 into t0, or store data in t0 at guest
+address t1. The _i32/_i64 size applies to the size of the input/output
+register t0 only. The address t1 is always sized according to the guest,
+and the width of the memory operation is controlled by flags.
-* qemu_st8 t0, t1, flags
-qemu_st16 t0, t1, flags
-qemu_st32 t0, t1, flags
-qemu_st64 t0, t1, flags
+Both t0 and t1 may be split into little-endian ordered pairs of registers
+if dealing with 64-bit quantities on a 32-bit host.
-Store the data t0 at the QEMU CPU Address t1. t1 has the QEMU CPU
-address type. 'flags' contains the QEMU memory index (selects user or
-kernel access) for example.
+The memidx selects the qemu tlb index to use (e.g. user or kernel access).
+The flags are the TCGMemOp bits, selecting the sign, width, and endianness
+of the memory access.
+
+For a 32-bit host, qemu_ld/st_i64 is guaranteed to only be used with a
+64-bit memory access specified in flags.
+
+*********
Note 1: Some shortcuts are defined when the last operand is known to be
a constant (e.g. addi for add, movi for mov).
a better generated code, but it reduces the memory usage of TCG and
the speed of the translation.
-- Don't hesitate to use helpers for complicated or seldom used target
- intructions. There is little performance advantage in using TCG to
- implement target instructions taking more than about twenty TCG
- instructions.
+- Don't hesitate to use helpers for complicated or seldom used guest
+ instructions. There is little performance advantage in using TCG to
+ implement guest instructions taking more than about twenty TCG
+ instructions. Note that this rule of thumb is more applicable to
+ helpers doing complex logic or arithmetic, where the C compiler has
+ scope to do a good job of optimisation; it is less relevant where
+ the instruction is mostly doing loads and stores, and in those cases
+ inline TCG may still be faster for longer sequences.
+
+- The hard limit on the number of TCG instructions you can generate
+ per guest instruction is set by MAX_OP_PER_INSTR in exec-all.h --
+ you cannot exceed this without risking a buffer overrun.
- Use the 'discard' instruction if you know that TCG won't be able to
prove that a given global is "dead" at a given program point. The
- x86 target uses it to improve the condition codes optimisation.
+ x86 guest uses it to improve the condition codes optimisation.
projects / qemu.git / blobdiff