dma: Fix stupid typo/thinko

[qemu.git] / trace-events

diff --git a/trace-events b/trace-events
index 5f27f1a8d1f1877f9f6dd06d9ad44de0241b212d..04b07239270343251e050246fe941dd2b325ed7c 100644 (file)
--- a/trace-events
+++ b/trace-events
@@ -143,7 +143,7 @@ ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x
 
 # hw/hd-geometry.c
 hd_geometry_lchs_guess(void *bs, int cyls, int heads, int secs) "bs %p LCHS %d %d %d"
-hd_geometry_guess(void *bs, int cyls, int heads, int secs, int trans) "bs %p CHS %d %d %d trans %d"
+hd_geometry_guess(void *bs, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "bs %p CHS %u %u %u trans %d"
 
 # hw/jazz-led.c
 jazz_led_read(uint64_t addr, uint8_t val) "read addr=0x%"PRIx64": 0x%x"
@@ -262,7 +262,7 @@ usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
 usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
 usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
 usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s"
-usb_ehci_interrupt(uint32_t level, uint32_t sts, uint32_t mask) "level %d, sts 0x%x, mask 0x%x"
+usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x"
 
 # hw/usb/hcd-uhci.c
 usb_uhci_reset(void) "=== RESET ==="
@@ -351,6 +351,20 @@ usb_hub_clear_port_feature(int addr, int nr, const char *f) "dev %d, port %d, fe
 usb_hub_attach(int addr, int nr) "dev %d, port %d"
 usb_hub_detach(int addr, int nr) "dev %d, port %d"
 
+# hw/usb/dev-uas.c
+usb_uas_reset(int addr) "dev %d"
+usb_uas_command(int addr, uint16_t tag, int lun, uint32_t lun64_1, uint32_t lun64_2) "dev %d, tag 0x%x, lun %d, lun64 %08x-%08x"
+usb_uas_response(int addr, uint16_t tag, uint8_t code) "dev %d, tag 0x%x, code 0x%x"
+usb_uas_sense(int addr, uint16_t tag, uint8_t status) "dev %d, tag 0x%x, status 0x%x"
+usb_uas_read_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_write_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_xfer_data(int addr, uint16_t tag, uint32_t copy, uint32_t uoff, uint32_t usize, uint32_t soff, uint32_t ssize) "dev %d, tag 0x%x, copy %d, usb-pkt %d/%d, scsi-buf %d/%d"
+usb_uas_scsi_data(int addr, uint16_t tag, uint32_t bytes) "dev %d, tag 0x%x, bytes %d"
+usb_uas_scsi_complete(int addr, uint16_t tag, uint32_t status, uint32_t resid) "dev %d, tag 0x%x, status 0x%x, residue %d"
+usb_uas_tmf_abort_task(int addr, uint16_t tag, uint16_t task_tag) "dev %d, tag 0x%x, task-tag 0x%x"
+usb_uas_tmf_logical_unit_reset(int addr, uint16_t tag, int lun) "dev %d, tag 0x%x, lun %d"
+usb_uas_tmf_unsupported(int addr, uint16_t tag, uint32_t function) "dev %d, tag 0x%x, function 0x%x"
+
 # hw/usb/host-linux.c
 usb_host_open_started(int bus, int addr) "dev %d:%d"
 usb_host_open_success(int bus, int addr) "dev %d:%d"
@@ -389,6 +403,7 @@ usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
 
 # hw/scsi-bus.c
 scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_cancel(int target, int lun, int tag) "target %d lun %d tag %d"
 scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
 scsi_req_data_canceled(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
 scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
@@ -397,6 +412,7 @@ scsi_req_parsed(int target, int lun, int tag, int cmd, int mode, int xfer) "targ
 scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64
 scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
 scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x"
+scsi_device_set_ua(int target, int lun, int key, int asc, int ascq) "target %d lun %d key %#02x asc %#02x ascq %#02x"
 scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d"
 scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x"
 scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d"
@@ -581,7 +597,7 @@ megasas_dcmd_ld_get_list(int cmd, int num, int max) "scmd %d: DCMD LD get list:
 megasas_dcmd_ld_get_info(int cmd, int ld_id) "scmd %d: DCMD LD get info for dev %d"
 megasas_dcmd_pd_get_info(int cmd, int pd_id) "scmd %d: DCMD PD get info for dev %d"
 megasas_dcmd_pd_list_query(int cmd, int flags) "scmd %d: DCMD PD list query flags %x"
-megasas_dcmd_dump_frame(int offset, char f0, char f1, char f2, char f3, char f4, char f5, char f6, char f7) "0x%x: %02x %02x %02x %02x %02x %02x %02x %02x"
+megasas_dcmd_unsupported(int cmd, unsigned long size) "scmd %d: set properties len %ld"
 megasas_abort_frame(int cmd, int abort_cmd) "scmd %d: aborting frame %x"
 megasas_abort_no_cmd(int cmd, uint64_t context) "scmd %d: no active command for frame context %" PRIx64 ""
 megasas_abort_invalid_context(int cmd, uint64_t context, int abort_cmd) "scmd %d: invalid frame context %" PRIx64 " for abort frame %x"
@@ -954,3 +970,11 @@ qxl_render_blit_guest_primary_initialized(void) ""
 qxl_render_blit(int32_t stride, int32_t left, int32_t right, int32_t top, int32_t bottom) "stride=%d [%d, %d, %d, %d]"
 qxl_render_guest_primary_resized(int32_t width, int32_t height, int32_t stride, int32_t bytes_pp, int32_t bits_pp) "%dx%d, stride %d, bpp %d, depth %d"
 qxl_render_update_area_done(void *cookie) "%p"
+
+# hw/spapr_pci.c
+spapr_pci_msi(const char *msg, uint32_t n, uint32_t ca) "%s (device#%d, cfg=%x)"
+spapr_pci_msi_setup(const char *name, unsigned vector, uint64_t addr) "dev\"%s\" vector %u, addr=%"PRIx64
+spapr_pci_rtas_ibm_change_msi(unsigned func, unsigned req) "func %u, requested %u"
+spapr_pci_rtas_ibm_query_interrupt_source_number(unsigned ioa, unsigned intr) "queries for #%u, IRQ%u"
+spapr_pci_msi_write(uint64_t addr, uint64_t data, uint32_t dt_irq) "@%"PRIx64"<=%"PRIx64" IRQ %u"
+spapr_pci_lsi_set(const char *busname, int pin, uint32_t irq) "%s PIN%d IRQ %u"