ecc_diag_mem_writeb(uint64_t addr, uint32_t val) "Write diagnostic %"PRId64" = %02x"
ecc_diag_mem_readb(uint64_t addr, uint32_t ret) "Read diagnostic %"PRId64"= %02x"
+# hw/hd-geometry.c
+hd_geometry_lchs_guess(void *bs, int cyls, int heads, int secs) "bs %p LCHS %d %d %d"
+hd_geometry_guess(void *bs, uint32_t cyls, uint32_t heads, uint32_t secs, int trans) "bs %p CHS %u %u %u trans %d"
+
# hw/jazz-led.c
jazz_led_read(uint64_t addr, uint8_t val) "read addr=0x%"PRIx64": 0x%x"
jazz_led_write(uint64_t addr, uint8_t new) "write addr=0x%"PRIx64": 0x%x"
usb_ehci_qtd_bits(uint32_t addr, int ioc, int active, int halt, int babble, int xacterr) "QTD @ %08x - ioc %d, active %d, halt %d, babble %d, xacterr %d"
usb_ehci_itd(uint32_t addr, uint32_t nxt, uint32_t mplen, uint32_t mult, uint32_t ep, uint32_t devaddr) "ITD @ %08x: next %08x - mplen %d, mult %d, ep %d, dev %d"
usb_ehci_sitd(uint32_t addr, uint32_t nxt, uint32_t active) "ITD @ %08x: next %08x - active %d"
-usb_ehci_port_attach(uint32_t port, const char *device) "attach port #%d - %s"
-usb_ehci_port_detach(uint32_t port) "detach port #%d"
+usb_ehci_port_attach(uint32_t port, const char *owner, const char *device) "attach port #%d, owner %s, device %s"
+usb_ehci_port_detach(uint32_t port, const char *owner) "detach port #%d, owner %s"
usb_ehci_port_reset(uint32_t port, int enable) "reset port #%d - %d"
usb_ehci_data(int rw, uint32_t cpage, uint32_t offset, uint32_t addr, uint32_t len, uint32_t bufpos) "write %d, cpage %d, offset 0x%03x, addr 0x%08x, len %d, bufpos %d"
usb_ehci_queue_action(void *q, const char *action) "q %p: %s"
usb_ehci_packet_action(void *q, void *p, const char *action) "q %p p %p: %s"
+usb_ehci_irq(uint32_t level, uint32_t frindex, uint32_t sts, uint32_t mask) "level %d, frindex 0x%04x, sts 0x%x, mask 0x%x"
# hw/usb/hcd-uhci.c
usb_uhci_reset(void) "=== RESET ==="
usb_hub_attach(int addr, int nr) "dev %d, port %d"
usb_hub_detach(int addr, int nr) "dev %d, port %d"
+# hw/usb/dev-uas.c
+usb_uas_reset(int addr) "dev %d"
+usb_uas_command(int addr, uint16_t tag, int lun, uint32_t lun64_1, uint32_t lun64_2) "dev %d, tag 0x%x, lun %d, lun64 %08x-%08x"
+usb_uas_response(int addr, uint16_t tag, uint8_t code) "dev %d, tag 0x%x, code 0x%x"
+usb_uas_sense(int addr, uint16_t tag, uint8_t status) "dev %d, tag 0x%x, status 0x%x"
+usb_uas_read_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_write_ready(int addr, uint16_t tag) "dev %d, tag 0x%x"
+usb_uas_xfer_data(int addr, uint16_t tag, uint32_t copy, uint32_t uoff, uint32_t usize, uint32_t soff, uint32_t ssize) "dev %d, tag 0x%x, copy %d, usb-pkt %d/%d, scsi-buf %d/%d"
+usb_uas_scsi_data(int addr, uint16_t tag, uint32_t bytes) "dev %d, tag 0x%x, bytes %d"
+usb_uas_scsi_complete(int addr, uint16_t tag, uint32_t status, uint32_t resid) "dev %d, tag 0x%x, status 0x%x, residue %d"
+usb_uas_tmf_abort_task(int addr, uint16_t tag, uint16_t task_tag) "dev %d, tag 0x%x, task-tag 0x%x"
+usb_uas_tmf_logical_unit_reset(int addr, uint16_t tag, int lun) "dev %d, tag 0x%x, lun %d"
+usb_uas_tmf_unsupported(int addr, uint16_t tag, uint32_t function) "dev %d, tag 0x%x, function 0x%x"
+
# hw/usb/host-linux.c
usb_host_open_started(int bus, int addr) "dev %d:%d"
usb_host_open_success(int bus, int addr) "dev %d:%d"
usb_host_urb_canceled(int bus, int addr, void *aurb) "dev %d:%d, aurb %p"
usb_host_ep_set_halt(int bus, int addr, int ep) "dev %d:%d, ep %d"
usb_host_ep_clear_halt(int bus, int addr, int ep) "dev %d:%d, ep %d"
-usb_host_ep_start_iso(int bus, int addr, int ep) "dev %d:%d, ep %d"
-usb_host_ep_stop_iso(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_start(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_stop(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_out_of_bufs(int bus, int addr, int ep) "dev %d:%d, ep %d"
+usb_host_iso_many_urbs(int bus, int addr, int count) "dev %d:%d, count %d"
usb_host_reset(int bus, int addr) "dev %d:%d"
usb_host_auto_scan_enabled(void)
usb_host_auto_scan_disabled(void)
# hw/scsi-bus.c
scsi_req_alloc(int target, int lun, int tag) "target %d lun %d tag %d"
+scsi_req_cancel(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_req_data(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
scsi_req_data_canceled(int target, int lun, int tag, int len) "target %d lun %d tag %d len %d"
scsi_req_dequeue(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_req_parsed_lba(int target, int lun, int tag, int cmd, uint64_t lba) "target %d lun %d tag %d command %d lba %"PRIu64
scsi_req_parse_bad(int target, int lun, int tag, int cmd) "target %d lun %d tag %d command %d"
scsi_req_build_sense(int target, int lun, int tag, int key, int asc, int ascq) "target %d lun %d tag %d key %#02x asc %#02x ascq %#02x"
+scsi_device_set_ua(int target, int lun, int key, int asc, int ascq) "target %d lun %d key %#02x asc %#02x ascq %#02x"
scsi_report_luns(int target, int lun, int tag) "target %d lun %d tag %d"
scsi_inquiry(int target, int lun, int tag, int cdb1, int cdb2) "target %d lun %d tag %d page %#02x/%#02x"
scsi_test_unit_ready(int target, int lun, int tag) "target %d lun %d tag %d"
# hw/lm32_sys.c
lm32_sys_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
+# hw/megasas.c
+megasas_init_firmware(uint64_t pa) "pa %" PRIx64 " "
+megasas_init_queue(uint64_t queue_pa, int queue_len, uint64_t head, uint64_t tail, uint32_t flags) "queue at %" PRIx64 " len %d head %" PRIx64 " tail %" PRIx64 " flags %x"
+megasas_initq_map_failed(int frame) "scmd %d: failed to map queue"
+megasas_initq_mismatch(int queue_len, int fw_cmds) "queue size %d max fw cmds %d"
+megasas_qf_found(unsigned int index, uint64_t pa) "found mapped frame %x pa %" PRIx64 ""
+megasas_qf_new(unsigned int index, void *cmd) "return new frame %x cmd %p"
+megasas_qf_failed(unsigned long pa) "all frames busy for frame %lx"
+megasas_qf_enqueue(unsigned int index, unsigned int count, uint64_t context, unsigned int tail, int busy) "enqueue frame %x count %d context %" PRIx64 " tail %x busy %d"
+megasas_qf_update(unsigned int head, unsigned int busy) "update reply queue head %x busy %d"
+megasas_qf_dequeue(unsigned int index) "dequeue frame %x"
+megasas_qf_map_failed(int cmd, unsigned long frame) "scmd %d: frame %lu"
+megasas_qf_complete_noirq(uint64_t context) "context %" PRIx64 " "
+megasas_qf_complete(uint64_t context, unsigned int tail, unsigned int offset, int busy, unsigned int doorbell) "context %" PRIx64 " tail %x offset %d busy %d doorbell %x"
+megasas_handle_frame(const char *cmd, uint64_t addr, uint64_t context, uint32_t count) "MFI cmd %s addr %" PRIx64 " context %" PRIx64 " count %d"
+megasas_frame_busy(uint64_t addr) "frame %" PRIx64 " busy"
+megasas_unhandled_frame_cmd(int cmd, uint8_t frame_cmd) "scmd %d: Unhandled MFI cmd %x"
+megasas_handle_scsi(const char *frame, int bus, int dev, int lun, void *sdev, unsigned long size) "%s dev %x/%x/%x sdev %p xfer %lu"
+megasas_scsi_target_not_present(const char *frame, int bus, int dev, int lun) "%s dev %x/%x/%x target not present"
+megasas_scsi_invalid_cdb_len(const char *frame, int bus, int dev, int lun, int len) "%s dev %x/%x/%x invalid cdb len %d"
+megasas_iov_read_overflow(int cmd, int bytes, int len) "scmd %d: %d/%d bytes"
+megasas_iov_write_overflow(int cmd, int bytes, int len) "scmd %d: %d/%d bytes"
+megasas_iov_read_underflow(int cmd, int bytes, int len) "scmd %d: %d/%d bytes"
+megasas_iov_write_underflow(int cmd, int bytes, int len) "scmd %d: %d/%d bytes"
+megasas_scsi_req_alloc_failed(const char *frame, int dev, int lun) "%s dev %x/%x req allocation failed"
+megasas_scsi_read_start(int cmd, int len) "scmd %d: transfer %d bytes of data"
+megasas_scsi_write_start(int cmd, int len) "scmd %d: transfer %d bytes of data"
+megasas_scsi_nodata(int cmd) "scmd %d: no data to be transferred"
+megasas_scsi_complete(int cmd, uint32_t status, int len, int xfer) "scmd %d: finished with status %x, len %u/%u"
+megasas_command_complete(int cmd, uint32_t status, uint32_t resid) "scmd %d: command completed, status %x, residual %d"
+megasas_handle_io(int cmd, const char *frame, int dev, int lun, unsigned long lba, unsigned long count) "scmd %d: %s dev %x/%x lba %lx count %lu"
+megasas_io_target_not_present(int cmd, const char *frame, int dev, int lun) "scmd %d: %s dev 1/%x/%x LUN not present"
+megasas_io_read_start(int cmd, unsigned long lba, unsigned long count, unsigned long len) "scmd %d: start LBA %lx %lu blocks (%lu bytes)"
+megasas_io_write_start(int cmd, unsigned long lba, unsigned long count, unsigned long len) "scmd %d: start LBA %lx %lu blocks (%lu bytes)"
+megasas_io_complete(int cmd, uint32_t len) "scmd %d: %d bytes completed"
+megasas_io_read(int cmd, int bytes, int len, unsigned long offset) "scmd %d: %d/%d bytes, iov offset %lu"
+megasas_io_write(int cmd, int bytes, int len, unsigned long offset) "scmd %d: %d/%d bytes, iov offset %lu"
+megasas_io_continue(int cmd, int bytes) "scmd %d: %d bytes left"
+megasas_iovec_map_failed(int cmd, int index, unsigned long iov_size) "scmd %d: iovec %d size %lu"
+megasas_iovec_sgl_overflow(int cmd, int index, int limit) "scmd %d: iovec count %d limit %d"
+megasas_iovec_sgl_underflow(int cmd, int index) "scmd %d: iovec count %d"
+megasas_iovec_sgl_invalid(int cmd, int index, uint64_t pa, uint32_t len) "scmd %d: element %d pa %" PRIx64 " len %u"
+megasas_iovec_overflow(int cmd, int len, int limit) "scmd %d: len %d limit %d"
+megasas_iovec_underflow(int cmd, int len, int limit) "scmd %d: len %d limit %d"
+megasas_handle_dcmd(int cmd, int opcode) "scmd %d: MFI DCMD opcode %x"
+megasas_finish_dcmd(int cmd, int size) "scmd %d: MFI DCMD wrote %d bytes"
+megasas_dcmd_req_alloc_failed(int cmd, const char *desc) "scmd %d: %s alloc failed"
+megasas_dcmd_internal_submit(int cmd, const char *desc, int dev) "scmd %d: %s to dev %d"
+megasas_dcmd_internal_finish(int cmd, int opcode, int lun) "scmd %d: DCMD finish internal cmd %x lun %d"
+megasas_dcmd_internal_invalid(int cmd, int opcode) "scmd %d: Invalid internal DCMD %x"
+megasas_dcmd_unhandled(int cmd, int opcode, int len) "scmd %d: opcode %x, len %d"
+megasas_dcmd_zero_sge(int cmd) "scmd %d: zero DCMD sge count"
+megasas_dcmd_invalid_sge(int cmd, int count) "scmd %d: invalid DCMD sge count %d"
+megasas_dcmd_map_failed(int cmd) "scmd %d: Failed to map DCMD buffer"
+megasas_dcmd_invalid_xfer_len(int cmd, unsigned long size, unsigned long max) "scmd %d: invalid xfer len %ld, max %ld"
+megasas_dcmd_enter(int cmd, const char *dcmd, int len) "scmd %d: DCMD %s len %d"
+megasas_dcmd_dummy(int cmd, unsigned long size) "scmd %d: DCMD dummy xfer len %ld"
+megasas_dcmd_set_fw_time(int cmd, unsigned long time) "scmd %d: Set FW time %lx"
+megasas_dcmd_pd_get_list(int cmd, int num, int max, int offset) "scmd %d: DCMD PD get list: %d / %d PDs, size %d"
+megasas_dcmd_ld_get_list(int cmd, int num, int max) "scmd %d: DCMD LD get list: found %d / %d LDs"
+megasas_dcmd_ld_get_info(int cmd, int ld_id) "scmd %d: DCMD LD get info for dev %d"
+megasas_dcmd_pd_get_info(int cmd, int pd_id) "scmd %d: DCMD PD get info for dev %d"
+megasas_dcmd_pd_list_query(int cmd, int flags) "scmd %d: DCMD PD list query flags %x"
+megasas_dcmd_unsupported(int cmd, unsigned long size) "scmd %d: set properties len %ld"
+megasas_abort_frame(int cmd, int abort_cmd) "scmd %d: aborting frame %x"
+megasas_abort_no_cmd(int cmd, uint64_t context) "scmd %d: no active command for frame context %" PRIx64 ""
+megasas_abort_invalid_context(int cmd, uint64_t context, int abort_cmd) "scmd %d: invalid frame context %" PRIx64 " for abort frame %x"
+megasas_reset(void) "Reset"
+megasas_init(int sges, int cmds, const char *intr, const char *mode) "Using %d sges, %d cmds, %s, %s mode"
+megasas_msix_raise(int vector) "vector %d"
+megasas_irq_lower(void) "INTx"
+megasas_irq_raise(void) "INTx"
+megasas_intr_enabled(void) "Interrupts enabled"
+megasas_intr_disabled(void) "Interrupts disabled"
+megasas_mmio_readl(unsigned long addr, uint32_t val) "addr 0x%lx: 0x%x"
+megasas_mmio_invalid_readl(unsigned long addr) "addr 0x%lx"
+megasas_mmio_writel(uint32_t addr, uint32_t val) "addr 0x%x: 0x%x"
+megasas_mmio_invalid_writel(uint32_t addr, uint32_t val) "addr 0x%x: 0x%x"
+
# hw/milkymist-ac97.c
milkymist_ac97_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x"
milkymist_ac97_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x"
iscsi_aio_readv(void *iscsi, int64_t sector_num, int nb_sectors, void *opaque, void *acb) "iscsi %p sector_num %"PRId64" nb_sectors %d opaque %p acb %p"
# hw/esp.c
+esp_error_fifo_overrun(void) "FIFO overrun"
+esp_error_unhandled_command(uint32_t val) "unhandled command (%2.2x)"
+esp_error_invalid_write(uint32_t val, uint32_t addr) "invalid write of 0x%02x at [0x%x]"
esp_raise_irq(void) "Raise IRQ"
esp_lower_irq(void) "Lower IRQ"
esp_dma_enable(void) "Raise enable"
esp_mem_writeb_cmd_msgacc(uint32_t val) "Message Accepted (%2.2x)"
esp_mem_writeb_cmd_pad(uint32_t val) "Transfer padding (%2.2x)"
esp_mem_writeb_cmd_satn(uint32_t val) "Set ATN (%2.2x)"
+esp_mem_writeb_cmd_rstatn(uint32_t val) "Reset ATN (%2.2x)"
esp_mem_writeb_cmd_sel(uint32_t val) "Select without ATN (%2.2x)"
esp_mem_writeb_cmd_selatn(uint32_t val) "Select with ATN (%2.2x)"
esp_mem_writeb_cmd_selatns(uint32_t val) "Select with ATN & stop (%2.2x)"
esp_mem_writeb_cmd_ensel(uint32_t val) "Enable selection (%2.2x)"
+esp_mem_writeb_cmd_dissel(uint32_t val) "Disable selection (%2.2x)"
+esp_pci_error_invalid_dma_direction(void) "invalid DMA transfer direction"
+esp_pci_error_invalid_read(uint32_t reg) "read access outside bounds (reg 0x%x)"
+esp_pci_error_invalid_write(uint32_t reg) "write access outside bounds (reg 0x%x)"
+esp_pci_error_invalid_write_dma(uint32_t val, uint32_t addr) "invalid write of 0x%02x at [0x%x]"
+esp_pci_dma_read(uint32_t saddr, uint32_t reg) "reg[%d]: 0x%8.8x"
+esp_pci_dma_write(uint32_t saddr, uint32_t reg, uint32_t val) "reg[%d]: 0x%8.8x -> 0x%8.8x"
+esp_pci_dma_idle(uint32_t val) "IDLE (%.8x)"
+esp_pci_dma_blast(uint32_t val) "BLAST (%.8x)"
+esp_pci_dma_abort(uint32_t val) "ABORT (%.8x)"
+esp_pci_dma_start(uint32_t val) "START (%.8x)"
+esp_pci_sbac_read(uint32_t reg) "sbac: 0x%8.8x"
+esp_pci_sbac_write(uint32_t reg, uint32_t val) "sbac: 0x%8.8x -> 0x%8.8x"
# monitor.c
handle_qmp_command(void *mon, const char *cmd_name) "mon %p cmd_name \"%s\""
monitor_protocol_emitter(void *mon) "mon %p"
+monitor_protocol_event(uint32_t event, const char *evname, void *data) "event=%d name \"%s\" data %p"
+monitor_protocol_event_handler(uint32_t event, void *data, uint64_t last, uint64_t now) "event=%d data=%p last=%" PRId64 " now=%" PRId64
+monitor_protocol_event_emit(uint32_t event, void *data) "event=%d data=%p"
+monitor_protocol_event_queue(uint32_t event, void *data, uint64_t rate, uint64_t last, uint64_t now) "event=%d data=%p rate=%" PRId64 " last=%" PRId64 " now=%" PRId64
+monitor_protocol_event_throttle(uint32_t event, uint64_t rate) "event=%d rate=%" PRId64
# hw/opencores_eth.c
open_eth_mii_write(unsigned idx, uint16_t v) "MII[%02x] <- %04x"
# vga.c
ppm_save(const char *filename, void *display_surface) "%s surface=%p"
+# savevm.c
+
+savevm_section_start(void) ""
+savevm_section_end(unsigned int section_id) "section_id %u"
+
# hw/qxl.c
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
disable qxl_io_write_vga(int qid, const char *mode, uint32_t addr, uint32_t val) "%d %s addr=%u val=%u"
qxl_render_blit(int32_t stride, int32_t left, int32_t right, int32_t top, int32_t bottom) "stride=%d [%d, %d, %d, %d]"
qxl_render_guest_primary_resized(int32_t width, int32_t height, int32_t stride, int32_t bytes_pp, int32_t bits_pp) "%dx%d, stride %d, bpp %d, depth %d"
qxl_render_update_area_done(void *cookie) "%p"
+
+# hw/spapr_pci.c
+spapr_pci_msi(const char *msg, uint32_t n, uint32_t ca) "%s (device#%d, cfg=%x)"
+spapr_pci_msi_setup(const char *name, unsigned vector, uint64_t addr) "dev\"%s\" vector %u, addr=%"PRIx64
+spapr_pci_rtas_ibm_change_msi(unsigned func, unsigned req) "func %u, requested %u"
+spapr_pci_rtas_ibm_query_interrupt_source_number(unsigned ioa, unsigned intr) "queries for #%u, IRQ%u"
+spapr_pci_msi_write(uint64_t addr, uint64_t data, uint32_t dt_irq) "@%"PRIx64"<=%"PRIx64" IRQ %u"
+spapr_pci_lsi_set(const char *busname, int pin, uint32_t irq) "%s PIN%d IRQ %u"
projects / qemu.git / blobdiff