return i;
}
+char *qemu_strsep(char **input, const char *delim)
+{
+ char *result = *input;
+ if (result != NULL) {
+ char *p;
+
+ for (p = result; *p != '\0'; p++) {
+ if (strchr(delim, *p)) {
+ break;
+ }
+ }
+ if (*p == '\0') {
+ *input = NULL;
+ } else {
+ *p = '\0';
+ *input = p + 1;
+ }
+ }
+ return result;
+}
+
time_t mktimegm(struct tm *tm)
{
time_t t;
#endif
}
+/*
+ * Searches for an area with non-zero content in a buffer
+ *
+ * Attention! The len must be a multiple of
+ * BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR * sizeof(VECTYPE)
+ * and addr must be a multiple of sizeof(VECTYPE) due to
+ * restriction of optimizations in this function.
+ *
+ * can_use_buffer_find_nonzero_offset() can be used to check
+ * these requirements.
+ *
+ * The return value is the offset of the non-zero area rounded
+ * down to a multiple of sizeof(VECTYPE) for the first
+ * BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR chunks and down to
+ * BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR * sizeof(VECTYPE)
+ * afterwards.
+ *
+ * If the buffer is all zero the return value is equal to len.
+ */
+
+size_t buffer_find_nonzero_offset(const void *buf, size_t len)
+{
+ const VECTYPE *p = buf;
+ const VECTYPE zero = (VECTYPE){0};
+ size_t i;
+
+ assert(can_use_buffer_find_nonzero_offset(buf, len));
+
+ if (!len) {
+ return 0;
+ }
+
+ for (i = 0; i < BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR; i++) {
+ if (!ALL_EQ(p[i], zero)) {
+ return i * sizeof(VECTYPE);
+ }
+ }
+
+ for (i = BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR;
+ i < len / sizeof(VECTYPE);
+ i += BUFFER_FIND_NONZERO_OFFSET_UNROLL_FACTOR) {
+ VECTYPE tmp0 = p[i + 0] | p[i + 1];
+ VECTYPE tmp1 = p[i + 2] | p[i + 3];
+ VECTYPE tmp2 = p[i + 4] | p[i + 5];
+ VECTYPE tmp3 = p[i + 6] | p[i + 7];
+ VECTYPE tmp01 = tmp0 | tmp1;
+ VECTYPE tmp23 = tmp2 | tmp3;
+ if (!ALL_EQ(tmp01 | tmp23, zero)) {
+ break;
+ }
+ }
+
+ return i * sizeof(VECTYPE);
+}
+
/*
* Checks if a buffer is all zeroes
*
long d0, d1, d2, d3;
const long * const data = buf;
+ /* use vector optimized zero check if possible */
+ if (can_use_buffer_find_nonzero_offset(buf, len)) {
+ return buffer_find_nonzero_offset(buf, len) == len;
+ }
+
assert(len % (4 * sizeof(long)) == 0);
len /= sizeof(long);
return unit * unit * unit;
case STRTOSZ_DEFSUFFIX_TB:
return unit * unit * unit * unit;
+ case STRTOSZ_DEFSUFFIX_PB:
+ return unit * unit * unit * unit * unit;
+ case STRTOSZ_DEFSUFFIX_EB:
+ return unit * unit * unit * unit * unit * unit;
}
return -1;
}
return strtosz_suffix(nptr, end, STRTOSZ_DEFSUFFIX_MB);
}
+/**
+ * parse_uint:
+ *
+ * @s: String to parse
+ * @value: Destination for parsed integer value
+ * @endptr: Destination for pointer to first character not consumed
+ * @base: integer base, between 2 and 36 inclusive, or 0
+ *
+ * Parse unsigned integer
+ *
+ * Parsed syntax is like strtoull()'s: arbitrary whitespace, a single optional
+ * '+' or '-', an optional "0x" if @base is 0 or 16, one or more digits.
+ *
+ * If @s is null, or @base is invalid, or @s doesn't start with an
+ * integer in the syntax above, set *@value to 0, *@endptr to @s, and
+ * return -EINVAL.
+ *
+ * Set *@endptr to point right beyond the parsed integer (even if the integer
+ * overflows or is negative, all digits will be parsed and *@endptr will
+ * point right beyond them).
+ *
+ * If the integer is negative, set *@value to 0, and return -ERANGE.
+ *
+ * If the integer overflows unsigned long long, set *@value to
+ * ULLONG_MAX, and return -ERANGE.
+ *
+ * Else, set *@value to the parsed integer, and return 0.
+ */
+int parse_uint(const char *s, unsigned long long *value, char **endptr,
+ int base)
+{
+ int r = 0;
+ char *endp = (char *)s;
+ unsigned long long val = 0;
+
+ if (!s) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ errno = 0;
+ val = strtoull(s, &endp, base);
+ if (errno) {
+ r = -errno;
+ goto out;
+ }
+
+ if (endp == s) {
+ r = -EINVAL;
+ goto out;
+ }
+
+ /* make sure we reject negative numbers: */
+ while (isspace((unsigned char)*s)) {
+ s++;
+ }
+ if (*s == '-') {
+ val = 0;
+ r = -ERANGE;
+ goto out;
+ }
+
+out:
+ *value = val;
+ *endptr = endp;
+ return r;
+}
+
+/**
+ * parse_uint_full:
+ *
+ * @s: String to parse
+ * @value: Destination for parsed integer value
+ * @base: integer base, between 2 and 36 inclusive, or 0
+ *
+ * Parse unsigned integer from entire string
+ *
+ * Have the same behavior of parse_uint(), but with an additional check
+ * for additional data after the parsed number. If extra characters are present
+ * after the parsed number, the function will return -EINVAL, and *@v will
+ * be set to 0.
+ */
+int parse_uint_full(const char *s, unsigned long long *value, int base)
+{
+ char *endp;
+ int r;
+
+ r = parse_uint(s, value, &endp, base);
+ if (r < 0) {
+ return r;
+ }
+ if (*endp) {
+ *value = 0;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int qemu_parse_fd(const char *param)
{
int fd;
return 2;
}
}
+
+/*
+ * helper to parse debug environment variables
+ */
+int parse_debug_env(const char *name, int max, int initial)
+{
+ char *debug_env = getenv(name);
+ char *inv = NULL;
+ int debug;
+
+ if (!debug_env) {
+ return initial;
+ }
+ debug = strtol(debug_env, &inv, 10);
+ if (inv == debug_env) {
+ return initial;
+ }
+ if (debug < 0 || debug > max) {
+ fprintf(stderr, "warning: %s not in [0, %d]", name, max);
+ return initial;
+ }
+ return debug;
+}
projects / qemu.git / blobdiff