#include <stdio.h>
#include <stdarg.h>
#include <string.h>
+#include <ctype.h>
#include <getopt.h>
#include <inttypes.h>
#include <unistd.h>
/* output Bochs bios info messages */
//#define DEBUG_BIOS
-/* debug IDE devices */
-//#define DEBUG_IDE
+//#define DEBUG_CMOS
/* debug PIC */
//#define DEBUG_PIC
/* debug PC keyboard : only mouse */
//#define DEBUG_MOUSE
+//#define DEBUG_SERIAL
+
#define PHYS_RAM_BASE 0xac000000
+#if !defined(CONFIG_SOFTMMU)
#define PHYS_RAM_MAX_SIZE (256 * 1024 * 1024)
+#else
+#define PHYS_RAM_MAX_SIZE (2047 * 1024 * 1024)
+#endif
+#if defined (TARGET_I386)
#define KERNEL_LOAD_ADDR 0x00100000
+#elif defined (TARGET_PPC)
+//#define USE_OPEN_FIRMWARE
+#if !defined (USE_OPEN_FIRMWARE)
+#define KERNEL_LOAD_ADDR 0x01000000
+#define KERNEL_STACK_ADDR 0x01200000
+#else
+#define KERNEL_LOAD_ADDR 0x00000000
+#define KERNEL_STACK_ADDR 0x00400000
+#endif
+#endif
#define INITRD_LOAD_ADDR 0x00400000
#define KERNEL_PARAMS_ADDR 0x00090000
#define GUI_REFRESH_INTERVAL 30
-#define MAX_DISKS 2
-
/* from plex86 (BSD license) */
struct __attribute__ ((packed)) linux_params {
// For 0x00..0x3f, see 'struct screen_info' in linux/include/linux/tty.h.
#define KERNEL_CS 0x10
#define KERNEL_DS 0x18
-#define MAX_IOPORTS 4096
+/* XXX: use a two level table to limit memory usage */
+#define MAX_IOPORTS 65536
static const char *bios_dir = CONFIG_QEMU_SHAREDIR;
char phys_ram_file[1024];
-CPUX86State *global_env;
-CPUX86State *cpu_single_env;
+CPUState *global_env;
+CPUState *cpu_single_env;
IOPortReadFunc *ioport_read_table[3][MAX_IOPORTS];
IOPortWriteFunc *ioport_write_table[3][MAX_IOPORTS];
-BlockDriverState *bs_table[MAX_DISKS];
+BlockDriverState *bs_table[MAX_DISKS], *fd_table[MAX_FD];
int vga_ram_size;
static DisplayState display_state;
int nographic;
int term_inited;
int64_t ticks_per_sec;
+int boot_device = 'c';
+static int ram_size;
/***********************************************************/
/* x86 io ports */
-uint32_t default_ioport_readb(CPUX86State *env, uint32_t address)
+uint32_t default_ioport_readb(CPUState *env, uint32_t address)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "inb: port=0x%04x\n", address);
return 0xff;
}
-void default_ioport_writeb(CPUX86State *env, uint32_t address, uint32_t data)
+void default_ioport_writeb(CPUState *env, uint32_t address, uint32_t data)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "outb: port=0x%04x data=0x%02x\n", address, data);
}
/* default is to make two byte accesses */
-uint32_t default_ioport_readw(CPUX86State *env, uint32_t address)
+uint32_t default_ioport_readw(CPUState *env, uint32_t address)
{
uint32_t data;
data = ioport_read_table[0][address & (MAX_IOPORTS - 1)](env, address);
return data;
}
-void default_ioport_writew(CPUX86State *env, uint32_t address, uint32_t data)
+void default_ioport_writew(CPUState *env, uint32_t address, uint32_t data)
{
ioport_write_table[0][address & (MAX_IOPORTS - 1)](env, address, data & 0xff);
ioport_write_table[0][(address + 1) & (MAX_IOPORTS - 1)](env, address + 1, (data >> 8) & 0xff);
}
-uint32_t default_ioport_readl(CPUX86State *env, uint32_t address)
+uint32_t default_ioport_readl(CPUState *env, uint32_t address)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "inl: port=0x%04x\n", address);
return 0xffffffff;
}
-void default_ioport_writel(CPUX86State *env, uint32_t address, uint32_t data)
+void default_ioport_writel(CPUState *env, uint32_t address, uint32_t data)
{
#ifdef DEBUG_UNUSED_IOPORT
fprintf(stderr, "outl: port=0x%04x data=0x%02x\n", address, data);
int load_kernel(const char *filename, uint8_t *addr)
{
- int fd, size, setup_sects;
+ int fd, size;
+#if defined (TARGET_I386)
+ int setup_sects;
uint8_t bootsect[512];
+#endif
+ printf("Load kernel at %p (0x%08x)\n", addr,
+ (uint32_t)addr - (uint32_t)phys_ram_base);
fd = open(filename, O_RDONLY);
if (fd < 0)
return -1;
+#if defined (TARGET_I386)
if (read(fd, bootsect, 512) != 512)
goto fail;
setup_sects = bootsect[0x1F1];
setup_sects = 4;
/* skip 16 bit setup code */
lseek(fd, (setup_sects + 1) * 512, SEEK_SET);
+#endif
size = read(fd, addr, 16 * 1024 * 1024);
if (size < 0)
goto fail;
return size;
}
-void cpu_x86_outb(CPUX86State *env, int addr, int val)
+void cpu_outb(CPUState *env, int addr, int val)
{
ioport_write_table[0][addr & (MAX_IOPORTS - 1)](env, addr, val);
}
-void cpu_x86_outw(CPUX86State *env, int addr, int val)
+void cpu_outw(CPUState *env, int addr, int val)
{
ioport_write_table[1][addr & (MAX_IOPORTS - 1)](env, addr, val);
}
-void cpu_x86_outl(CPUX86State *env, int addr, int val)
+void cpu_outl(CPUState *env, int addr, int val)
{
ioport_write_table[2][addr & (MAX_IOPORTS - 1)](env, addr, val);
}
-int cpu_x86_inb(CPUX86State *env, int addr)
+int cpu_inb(CPUState *env, int addr)
{
return ioport_read_table[0][addr & (MAX_IOPORTS - 1)](env, addr);
}
-int cpu_x86_inw(CPUX86State *env, int addr)
+int cpu_inw(CPUState *env, int addr)
{
return ioport_read_table[1][addr & (MAX_IOPORTS - 1)](env, addr);
}
-int cpu_x86_inl(CPUX86State *env, int addr)
+int cpu_inl(CPUState *env, int addr)
{
return ioport_read_table[2][addr & (MAX_IOPORTS - 1)](env, addr);
}
/***********************************************************/
-void ioport80_write(CPUX86State *env, uint32_t addr, uint32_t data)
+void ioport80_write(CPUState *env, uint32_t addr, uint32_t data)
{
}
fprintf(stderr, "\n");
#ifdef TARGET_I386
cpu_x86_dump_state(global_env, stderr, X86_DUMP_FPU | X86_DUMP_CCOP);
+#else
+ cpu_dump_state(global_env, stderr, 0);
#endif
va_end(ap);
abort();
/***********************************************************/
/* cmos emulation */
+#if defined (TARGET_I386)
#define RTC_SECONDS 0
#define RTC_SECONDS_ALARM 1
#define RTC_MINUTES 2
/* PC cmos mappings */
#define REG_EQUIPMENT_BYTE 0x14
+#define REG_IBM_CENTURY_BYTE 0x32
uint8_t cmos_data[128];
uint8_t cmos_index;
-void cmos_ioport_write(CPUX86State *env, uint32_t addr, uint32_t data)
+void cmos_ioport_write(CPUState *env, uint32_t addr, uint32_t data)
{
if (addr == 0x70) {
cmos_index = data & 0x7f;
- }
-}
-
-uint32_t cmos_ioport_read(CPUX86State *env, uint32_t addr)
-{
- int ret;
-
- if (addr == 0x70) {
- return 0xff;
} else {
- /* toggle update-in-progress bit for Linux (same hack as
- plex86) */
- ret = cmos_data[cmos_index];
- if (cmos_index == RTC_REG_A)
- cmos_data[RTC_REG_A] ^= 0x80;
- else if (cmos_index == RTC_REG_C)
- cmos_data[RTC_REG_C] = 0x00;
- return ret;
+#ifdef DEBUG_CMOS
+ printf("cmos: write index=0x%02x val=0x%02x\n",
+ cmos_index, data);
+#endif
+ switch(addr) {
+ case RTC_SECONDS_ALARM:
+ case RTC_MINUTES_ALARM:
+ case RTC_HOURS_ALARM:
+ /* XXX: not supported */
+ cmos_data[cmos_index] = data;
+ break;
+ case RTC_SECONDS:
+ case RTC_MINUTES:
+ case RTC_HOURS:
+ case RTC_DAY_OF_WEEK:
+ case RTC_DAY_OF_MONTH:
+ case RTC_MONTH:
+ case RTC_YEAR:
+ cmos_data[cmos_index] = data;
+ break;
+ case RTC_REG_A:
+ case RTC_REG_B:
+ cmos_data[cmos_index] = data;
+ break;
+ case RTC_REG_C:
+ case RTC_REG_D:
+ /* cannot write to them */
+ break;
+ default:
+ cmos_data[cmos_index] = data;
+ break;
+ }
}
}
-
static inline int to_bcd(int a)
{
return ((a / 10) << 4) | (a % 10);
}
-void cmos_init(void)
+static void cmos_update_time(void)
{
struct tm *tm;
time_t ti;
- int val;
ti = time(NULL);
tm = gmtime(&ti);
cmos_data[RTC_DAY_OF_MONTH] = to_bcd(tm->tm_mday);
cmos_data[RTC_MONTH] = to_bcd(tm->tm_mon + 1);
cmos_data[RTC_YEAR] = to_bcd(tm->tm_year % 100);
+ cmos_data[REG_IBM_CENTURY_BYTE] = to_bcd((tm->tm_year / 100) + 19);
+}
+
+uint32_t cmos_ioport_read(CPUState *env, uint32_t addr)
+{
+ int ret;
+
+ if (addr == 0x70) {
+ return 0xff;
+ } else {
+ switch(cmos_index) {
+ case RTC_SECONDS:
+ case RTC_MINUTES:
+ case RTC_HOURS:
+ case RTC_DAY_OF_WEEK:
+ case RTC_DAY_OF_MONTH:
+ case RTC_MONTH:
+ case RTC_YEAR:
+ case REG_IBM_CENTURY_BYTE:
+ cmos_update_time();
+ ret = cmos_data[cmos_index];
+ break;
+ case RTC_REG_A:
+ ret = cmos_data[cmos_index];
+ /* toggle update-in-progress bit for Linux (same hack as
+ plex86) */
+ cmos_data[RTC_REG_A] ^= 0x80;
+ break;
+ case RTC_REG_C:
+ ret = cmos_data[cmos_index];
+ pic_set_irq(8, 0);
+ cmos_data[RTC_REG_C] = 0x00;
+ break;
+ default:
+ ret = cmos_data[cmos_index];
+ break;
+ }
+#ifdef DEBUG_CMOS
+ printf("cmos: read index=0x%02x val=0x%02x\n",
+ cmos_index, ret);
+#endif
+ return ret;
+ }
+}
+
+void cmos_init(void)
+{
+ int val;
+
+ cmos_update_time();
cmos_data[RTC_REG_A] = 0x26;
cmos_data[RTC_REG_B] = 0x02;
cmos_data[REG_EQUIPMENT_BYTE] |= 0x04; /* PS/2 mouse installed */
/* memory size */
- val = (phys_ram_size / 1024) - 1024;
+ val = (ram_size / 1024) - 1024;
if (val > 65535)
val = 65535;
cmos_data[0x17] = val;
cmos_data[0x30] = val;
cmos_data[0x31] = val >> 8;
- val = (phys_ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
+ val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
if (val > 65535)
val = 65535;
cmos_data[0x34] = val;
cmos_data[0x35] = val >> 8;
- cmos_data[0x3d] = 0x02; /* hard drive boot */
-
+ switch(boot_device) {
+ case 'a':
+ case 'b':
+ cmos_data[0x3d] = 0x01; /* floppy boot */
+ break;
+ default:
+ case 'c':
+ cmos_data[0x3d] = 0x02; /* hard drive boot */
+ break;
+ case 'd':
+ cmos_data[0x3d] = 0x03; /* CD-ROM boot */
+ break;
+ }
+
register_ioport_write(0x70, 2, cmos_ioport_write, 1);
register_ioport_read(0x70, 2, cmos_ioport_read, 1);
}
+void cmos_register_fd (uint8_t fd0, uint8_t fd1)
+{
+ int nb = 0;
+
+ cmos_data[0x10] = 0;
+ switch (fd0) {
+ case 0:
+ /* 1.44 Mb 3"5 drive */
+ cmos_data[0x10] |= 0x40;
+ break;
+ case 1:
+ /* 2.88 Mb 3"5 drive */
+ cmos_data[0x10] |= 0x60;
+ break;
+ case 2:
+ /* 1.2 Mb 5"5 drive */
+ cmos_data[0x10] |= 0x20;
+ break;
+ }
+ switch (fd1) {
+ case 0:
+ /* 1.44 Mb 3"5 drive */
+ cmos_data[0x10] |= 0x04;
+ break;
+ case 1:
+ /* 2.88 Mb 3"5 drive */
+ cmos_data[0x10] |= 0x06;
+ break;
+ case 2:
+ /* 1.2 Mb 5"5 drive */
+ cmos_data[0x10] |= 0x02;
+ break;
+ }
+ if (fd0 < 3)
+ nb++;
+ if (fd1 < 3)
+ nb++;
+ switch (nb) {
+ case 0:
+ break;
+ case 1:
+ cmos_data[REG_EQUIPMENT_BYTE] |= 0x01; /* 1 drive, ready for boot */
+ break;
+ case 2:
+ cmos_data[REG_EQUIPMENT_BYTE] |= 0x41; /* 2 drives, ready for boot */
+ break;
+ }
+}
+#endif /* TARGET_I386 */
+
/***********************************************************/
/* 8259 pic emulation */
uint8_t irr; /* interrupt request register */
uint8_t imr; /* interrupt mask register */
uint8_t isr; /* interrupt service register */
- uint8_t priority_add; /* used to compute irq priority */
+ uint8_t priority_add; /* highest irq priority */
uint8_t irq_base;
uint8_t read_reg_select;
+ uint8_t poll;
uint8_t special_mask;
uint8_t init_state;
uint8_t auto_eoi;
- uint8_t rotate_on_autoeoi;
+ uint8_t rotate_on_auto_eoi;
+ uint8_t special_fully_nested_mode;
uint8_t init4; /* true if 4 byte init */
} PicState;
}
}
+/* return the highest priority found in mask (highest = smallest
+ number). Return 8 if no irq */
static inline int get_priority(PicState *s, int mask)
{
int priority;
if (mask == 0)
- return -1;
- priority = 7;
+ return 8;
+ priority = 0;
while ((mask & (1 << ((priority + s->priority_add) & 7))) == 0)
- priority--;
+ priority++;
return priority;
}
mask = s->irr & ~s->imr;
priority = get_priority(s, mask);
- if (priority < 0)
+ if (priority == 8)
return -1;
- /* compute current priority */
- cur_priority = get_priority(s, s->isr);
- if (priority > cur_priority) {
+ /* compute current priority. If special fully nested mode on the
+ master, the IRQ coming from the slave is not taken into account
+ for the priority computation. */
+ mask = s->isr;
+ if (s->special_fully_nested_mode && s == &pics[0])
+ mask &= ~(1 << 2);
+ cur_priority = get_priority(s, mask);
+ if (priority < cur_priority) {
/* higher priority found: an irq should be generated */
- return priority;
+ return (priority + s->priority_add) & 7;
} else {
return -1;
}
/* raise irq to CPU if necessary. must be called every time the active
irq may change */
-static void pic_update_irq(void)
+void pic_update_irq(void)
{
int irq2, irq;
/* from master pic */
pic_irq_requested = irq;
}
- cpu_x86_interrupt(global_env, CPU_INTERRUPT_HARD);
+#if defined(DEBUG_PIC)
+ {
+ int i;
+ for(i = 0; i < 2; i++) {
+ printf("pic%d: imr=%x irr=%x padd=%d\n",
+ i, pics[i].imr, pics[i].irr, pics[i].priority_add);
+
+ }
+ }
+ printf("pic: cpu_interrupt req=%d\n", pic_irq_requested);
+#endif
+ cpu_interrupt(global_env, CPU_INTERRUPT_HARD);
}
}
pic_update_irq();
}
-int cpu_x86_get_pic_interrupt(CPUX86State *env)
+/* acknowledge interrupt 'irq' */
+static inline void pic_intack(PicState *s, int irq)
+{
+ if (s->auto_eoi) {
+ if (s->rotate_on_auto_eoi)
+ s->priority_add = (irq + 1) & 7;
+ } else {
+ s->isr |= (1 << irq);
+ }
+ s->irr &= ~(1 << irq);
+}
+
+int cpu_x86_get_pic_interrupt(CPUState *env)
{
int irq, irq2, intno;
irq,
(double)(cpu_get_ticks() - irq_time[irq]) * 1000000.0 / ticks_per_sec);
#endif
-#ifdef DEBUG_PIC
+#if defined(DEBUG_PIC)
printf("pic_interrupt: irq=%d\n", irq);
#endif
if (irq >= 8) {
irq2 = irq & 7;
- pics[1].isr |= (1 << irq2);
- pics[1].irr &= ~(1 << irq2);
+ pic_intack(&pics[1], irq2);
irq = 2;
intno = pics[1].irq_base + irq2;
} else {
intno = pics[0].irq_base + irq;
}
- pics[0].isr |= (1 << irq);
- pics[0].irr &= ~(1 << irq);
+ pic_intack(&pics[0], irq);
return intno;
}
-void pic_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void pic_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
PicState *s;
- int priority;
+ int priority, cmd, irq;
#ifdef DEBUG_PIC
printf("pic_write: addr=0x%02x val=0x%02x\n", addr, val);
if (val & 0x08)
hw_error("level sensitive irq not supported");
} else if (val & 0x08) {
+ if (val & 0x04)
+ s->poll = 1;
if (val & 0x02)
s->read_reg_select = val & 1;
if (val & 0x40)
s->special_mask = (val >> 5) & 1;
} else {
- switch(val) {
- case 0x00:
- case 0x80:
- s->rotate_on_autoeoi = val >> 7;
+ cmd = val >> 5;
+ switch(cmd) {
+ case 0:
+ case 4:
+ s->rotate_on_auto_eoi = cmd >> 2;
break;
- case 0x20: /* end of interrupt */
- case 0xa0:
+ case 1: /* end of interrupt */
+ case 5:
priority = get_priority(s, s->isr);
- if (priority >= 0) {
- s->isr &= ~(1 << ((priority + s->priority_add) & 7));
+ if (priority != 8) {
+ irq = (priority + s->priority_add) & 7;
+ s->isr &= ~(1 << irq);
+ if (cmd == 5)
+ s->priority_add = (irq + 1) & 7;
+ pic_update_irq();
}
- if (val == 0xa0)
- s->priority_add = (s->priority_add + 1) & 7;
- pic_update_irq();
break;
- case 0x60 ... 0x67:
- priority = val & 7;
- s->isr &= ~(1 << priority);
+ case 3:
+ irq = val & 7;
+ s->isr &= ~(1 << irq);
pic_update_irq();
break;
- case 0xc0 ... 0xc7:
+ case 6:
s->priority_add = (val + 1) & 7;
pic_update_irq();
break;
- case 0xe0 ... 0xe7:
- priority = val & 7;
- s->isr &= ~(1 << priority);
- s->priority_add = (priority + 1) & 7;
+ case 7:
+ irq = val & 7;
+ s->isr &= ~(1 << irq);
+ s->priority_add = (irq + 1) & 7;
pic_update_irq();
break;
+ default:
+ /* no operation */
+ break;
}
}
} else {
}
break;
case 3:
+ s->special_fully_nested_mode = (val >> 4) & 1;
s->auto_eoi = (val >> 1) & 1;
s->init_state = 0;
break;
}
}
-uint32_t pic_ioport_read(CPUX86State *env, uint32_t addr1)
+static uint32_t pic_poll_read (PicState *s, uint32_t addr1)
+{
+ int ret;
+
+ ret = pic_get_irq(s);
+ if (ret >= 0) {
+ if (addr1 >> 7) {
+ pics[0].isr &= ~(1 << 2);
+ pics[0].irr &= ~(1 << 2);
+ }
+ s->irr &= ~(1 << ret);
+ s->isr &= ~(1 << ret);
+ if (addr1 >> 7 || ret != 2)
+ pic_update_irq();
+ } else {
+ ret = 0x07;
+ pic_update_irq();
+ }
+
+ return ret;
+}
+
+uint32_t pic_ioport_read(CPUState *env, uint32_t addr1)
{
PicState *s;
unsigned int addr;
addr = addr1;
s = &pics[addr >> 7];
addr &= 1;
- if (addr == 0) {
- if (s->read_reg_select)
- ret = s->isr;
- else
- ret = s->irr;
+ if (s->poll) {
+ ret = pic_poll_read(s, addr1);
+ s->poll = 0;
} else {
- ret = s->imr;
+ if (addr == 0) {
+ if (s->read_reg_select)
+ ret = s->isr;
+ else
+ ret = s->irr;
+ } else {
+ ret = s->imr;
+ }
}
#ifdef DEBUG_PIC
printf("pic_read: addr=0x%02x val=0x%02x\n", addr1, ret);
return ret;
}
+/* memory mapped interrupt status */
+uint32_t pic_intack_read(CPUState *env)
+{
+ int ret;
+
+ ret = pic_poll_read(&pics[0], 0x00);
+ if (ret == 2)
+ ret = pic_poll_read(&pics[1], 0x80) + 8;
+ /* Prepare for ISR read */
+ pics[0].read_reg_select = 1;
+
+ return ret;
+}
+
void pic_init(void)
{
+#if defined (TARGET_I386) || defined (TARGET_PPC)
register_ioport_write(0x20, 2, pic_ioport_write, 1);
register_ioport_read(0x20, 2, pic_ioport_read, 1);
register_ioport_write(0xa0, 2, pic_ioport_write, 1);
register_ioport_read(0xa0, 2, pic_ioport_read, 1);
+#endif
}
/***********************************************************/
case 5:
counter = (s->count - d) & 0xffff;
break;
+ case 3:
+ /* XXX: may be incorrect for odd counts */
+ counter = s->count - ((2 * d) % s->count);
+ break;
default:
counter = s->count - (d % s->count);
break;
out = 0;
break;
case 3:
- out = (d % s->count) < (s->count >> 1);
+ out = (d % s->count) < ((s->count + 1) >> 1);
break;
case 4:
case 5:
ret = d2 - d1;
break;
case 3:
- v = s->count - (s->count >> 1);
+ v = s->count - ((s->count + 1) >> 1);
d1 = (d1 + v) / s->count;
d2 = (d2 + v) / s->count;
ret = d2 - d1;
return ret;
}
+/* val must be 0 or 1 */
+static inline void pit_set_gate(PITChannelState *s, int val)
+{
+ switch(s->mode) {
+ default:
+ case 0:
+ case 4:
+ /* XXX: just disable/enable counting */
+ break;
+ case 1:
+ case 5:
+ if (s->gate < val) {
+ /* restart counting on rising edge */
+ s->count_load_time = cpu_get_ticks();
+ s->count_last_edge_check_time = s->count_load_time;
+ }
+ break;
+ case 2:
+ case 3:
+ if (s->gate < val) {
+ /* restart counting on rising edge */
+ s->count_load_time = cpu_get_ticks();
+ s->count_last_edge_check_time = s->count_load_time;
+ }
+ /* XXX: disable/enable counting */
+ break;
+ }
+ s->gate = val;
+}
+
static inline void pit_load_count(PITChannelState *s, int val)
{
if (val == 0)
s->count = val;
if (s == &pit_channels[0] && val <= pit_min_timer_count) {
fprintf(stderr,
- "\nWARNING: vl: on your system, accurate timer emulation is impossible if its frequency is more than %d Hz. If using a 2.5.xx Linux kernel, you must patch asm/param.h to change HZ from 1000 to 100.\n\n",
+ "\nWARNING: qemu: on your system, accurate timer emulation is impossible if its frequency is more than %d Hz. If using a 2.6 guest Linux kernel, you must patch asm/param.h to change HZ from 1000 to 100.\n\n",
PIT_FREQ / pit_min_timer_count);
}
}
-void pit_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void pit_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
int channel, access;
PITChannelState *s;
}
}
-uint32_t pit_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t pit_ioport_read(CPUState *env, uint32_t addr)
{
int ret, count;
PITChannelState *s;
return ret;
}
-void speaker_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+#if defined (TARGET_I386)
+void speaker_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
speaker_data_on = (val >> 1) & 1;
- pit_channels[2].gate = val & 1;
+ pit_set_gate(&pit_channels[2], val & 1);
}
-uint32_t speaker_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t speaker_ioport_read(CPUState *env, uint32_t addr)
{
int out;
out = pit_get_out(&pit_channels[2]);
return (speaker_data_on << 1) | pit_channels[2].gate | (out << 5) |
(dummy_refresh_clock << 4);
}
+#endif
void pit_init(void)
{
register_ioport_write(0x40, 4, pit_ioport_write, 1);
register_ioport_read(0x40, 3, pit_ioport_read, 1);
+#if defined (TARGET_I386)
register_ioport_read(0x61, 1, speaker_ioport_read, 1);
register_ioport_write(0x61, 1, speaker_ioport_write, 1);
+#endif
}
/***********************************************************/
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+/*
+ * These are the definitions for the Modem Control Register
+ */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2 0x08 /* Out2 complement */
+#define UART_MCR_OUT1 0x04 /* Out1 complement */
+#define UART_MCR_RTS 0x02 /* RTS complement */
+#define UART_MCR_DTR 0x01 /* DTR complement */
+
+/*
+ * These are the definitions for the Modem Status Register
+ */
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
+
#define UART_LSR_TEMT 0x40 /* Transmitter empty */
#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
#define UART_LSR_BI 0x10 /* Break interrupt indicator */
uint8_t lsr; /* read only */
uint8_t msr;
uint8_t scr;
+ /* NOTE: this hidden state is necessary for tx irq generation as
+ it can be reset while reading iir */
+ int thr_ipending;
} SerialState;
SerialState serial_ports[1];
if ((s->lsr & UART_LSR_DR) && (s->ier & UART_IER_RDI)) {
s->iir = UART_IIR_RDI;
- } else if ((s->lsr & UART_LSR_THRE) && (s->ier & UART_IER_THRI)) {
+ } else if (s->thr_ipending && (s->ier & UART_IER_THRI)) {
s->iir = UART_IIR_THRI;
} else {
s->iir = UART_IIR_NO_INT;
}
}
-void serial_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void serial_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
SerialState *s = &serial_ports[0];
unsigned char ch;
int ret;
addr &= 7;
+#ifdef DEBUG_SERIAL
+ printf("serial: write addr=0x%02x val=0x%02x\n", addr, val);
+#endif
switch(addr) {
default:
case 0:
if (s->lcr & UART_LCR_DLAB) {
s->divider = (s->divider & 0xff00) | val;
} else {
+ s->thr_ipending = 0;
s->lsr &= ~UART_LSR_THRE;
serial_update_irq();
do {
ret = write(1, &ch, 1);
} while (ret != 1);
+ s->thr_ipending = 1;
s->lsr |= UART_LSR_THRE;
s->lsr |= UART_LSR_TEMT;
serial_update_irq();
}
}
-uint32_t serial_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t serial_ioport_read(CPUState *env, uint32_t addr)
{
SerialState *s = &serial_ports[0];
uint32_t ret;
break;
case 2:
ret = s->iir;
+ /* reset THR pending bit */
+ if ((ret & 0x7) == UART_IIR_THRI)
+ s->thr_ipending = 0;
+ serial_update_irq();
break;
case 3:
ret = s->lcr;
ret = s->lsr;
break;
case 6:
- ret = s->msr;
+ if (s->mcr & UART_MCR_LOOP) {
+ /* in loopback, the modem output pins are connected to the
+ inputs */
+ ret = (s->mcr & 0x0c) << 4;
+ ret |= (s->mcr & 0x02) << 3;
+ ret |= (s->mcr & 0x01) << 5;
+ } else {
+ ret = s->msr;
+ }
break;
case 7:
ret = s->scr;
break;
}
+#ifdef DEBUG_SERIAL
+ printf("serial: read addr=0x%02x val=0x%02x\n", addr, ret);
+#endif
return ret;
}
#define TERM_ESCAPE 0x01 /* ctrl-a is used for escape */
-static int term_got_escape;
+static int term_got_escape, term_command;
+static unsigned char term_cmd_buf[128];
+
+typedef struct term_cmd_t {
+ const unsigned char *name;
+ void (*handler)(unsigned char *params);
+} term_cmd_t;
+
+static void do_change_cdrom (unsigned char *params);
+static void do_change_fd0 (unsigned char *params);
+static void do_change_fd1 (unsigned char *params);
+
+static term_cmd_t term_cmds[] = {
+ { "changecd", &do_change_cdrom, },
+ { "changefd0", &do_change_fd0, },
+ { "changefd1", &do_change_fd1, },
+ { NULL, NULL, },
+};
void term_print_help(void)
{
printf("\n"
"C-a h print this help\n"
"C-a x exit emulatior\n"
+ "C-a d switch on/off debug log\n"
"C-a s save disk data back to file (if -snapshot)\n"
"C-a b send break (magic sysrq)\n"
+ "C-a c send qemu internal command\n"
"C-a C-a send C-a\n"
);
}
+static void do_change_cdrom (unsigned char *params)
+{
+ /* Dunno how to do it... */
+}
+
+static void do_change_fd (int fd, unsigned char *params)
+{
+ unsigned char *name_start, *name_end, *ros;
+ int ro;
+
+ for (name_start = params;
+ isspace(*name_start); name_start++)
+ continue;
+ if (*name_start == '\0')
+ return;
+ for (name_end = name_start;
+ !isspace(*name_end) && *name_end != '\0'; name_end++)
+ continue;
+ for (ros = name_end + 1; isspace(*ros); ros++)
+ continue;
+ if (ros[0] == 'r' && ros[1] == 'o')
+ ro = 1;
+ else
+ ro = 0;
+ *name_end = '\0';
+ printf("Change fd %d to %s (%s)\n", fd, name_start, params);
+ fdctrl_disk_change(fd, name_start, ro);
+}
+
+static void do_change_fd0 (unsigned char *params)
+{
+ do_change_fd(0, params);
+}
+
+static void do_change_fd1 (unsigned char *params)
+{
+ do_change_fd(1, params);
+}
+
+static void serial_treat_command ()
+{
+ unsigned char *cmd_start, *cmd_end;
+ int i;
+
+ for (cmd_start = term_cmd_buf; isspace(*cmd_start); cmd_start++)
+ continue;
+ for (cmd_end = cmd_start;
+ !isspace(*cmd_end) && *cmd_end != '\0'; cmd_end++)
+ continue;
+ for (i = 0; term_cmds[i].name != NULL; i++) {
+ if (strlen(term_cmds[i].name) == (cmd_end - cmd_start) &&
+ memcmp(term_cmds[i].name, cmd_start, cmd_end - cmd_start) == 0) {
+ (*term_cmds[i].handler)(cmd_end + 1);
+ return;
+ }
+ }
+ *cmd_end = '\0';
+ printf("Unknown term command: %s\n", cmd_start);
+}
+
+extern FILE *logfile;
+
/* called when a char is received */
void serial_received_byte(SerialState *s, int ch)
{
- if (term_got_escape) {
+ if (term_command) {
+ if (ch == '\n' || ch == '\r' || term_command == 127) {
+ printf("\n");
+ serial_treat_command();
+ term_command = 0;
+ } else {
+ if (ch == 0x7F || ch == 0x08) {
+ if (term_command > 1) {
+ term_cmd_buf[--term_command - 1] = '\0';
+ printf("\r "
+ " ");
+ printf("\r> %s", term_cmd_buf);
+ }
+ } else if (ch > 0x1f) {
+ term_cmd_buf[term_command++ - 1] = ch;
+ term_cmd_buf[term_command - 1] = '\0';
+ printf("\r> %s", term_cmd_buf);
+ }
+ fflush(stdout);
+ }
+ } else if (term_got_escape) {
term_got_escape = 0;
switch(ch) {
case 'h':
s->lsr |= UART_LSR_BI | UART_LSR_DR;
serial_update_irq();
break;
+ case 'c':
+ printf("> ");
+ fflush(stdout);
+ term_command = 1;
+ break;
+ case 'd':
+ cpu_set_log(CPU_LOG_ALL);
+ break;
case TERM_ESCAPE:
goto send_char;
}
SerialState *s = &serial_ports[0];
s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
-
+ s->iir = UART_IIR_NO_INT;
+
+#if defined(TARGET_I386) || defined (TARGET_PPC)
register_ioport_write(0x3f8, 8, serial_ioport_write, 1);
register_ioport_read(0x3f8, 8, serial_ioport_read, 1);
+#endif
}
/***********************************************************/
/* ne2000 emulation */
+#if defined (TARGET_I386)
#define NE2000_IOPORT 0x300
#define NE2000_IRQ 9
ne2000_update_irq(s);
}
-void ne2000_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void ne2000_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
NE2000State *s = &ne2000_state;
int offset, page;
}
}
-uint32_t ne2000_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t ne2000_ioport_read(CPUState *env, uint32_t addr)
{
NE2000State *s = &ne2000_state;
int offset, page, ret;
return ret;
}
-void ne2000_asic_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void ne2000_asic_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
NE2000State *s = &ne2000_state;
uint8_t *p;
}
}
-uint32_t ne2000_asic_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t ne2000_asic_ioport_read(CPUState *env, uint32_t addr)
{
NE2000State *s = &ne2000_state;
uint8_t *p;
return ret;
}
-void ne2000_reset_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
+void ne2000_reset_ioport_write(CPUState *env, uint32_t addr, uint32_t val)
{
/* nothing to do (end of reset pulse) */
}
-uint32_t ne2000_reset_ioport_read(CPUX86State *env, uint32_t addr)
+uint32_t ne2000_reset_ioport_read(CPUState *env, uint32_t addr)
{
ne2000_reset();
return 0;
register_ioport_read(NE2000_IOPORT + 0x1f, 1, ne2000_reset_ioport_read, 1);
ne2000_reset();
}
-
-/***********************************************************/
-/* ide emulation */
-
-/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SRV_STAT 0x10
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD 0x01
-#define IO 0x02
-#define REL 0x04
-#define TAG_MASK 0xf8
-
-#define IDE_CMD_RESET 0x04
-#define IDE_CMD_DISABLE_IRQ 0x02
-
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP 0x00
-/*
- * 0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code */
-/*
- * 0x04->0x07 Reserved
- */
-#define WIN_SRST 0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET 0x08
-/*
- * 0x09->0x0F Reserved
- */
-#define WIN_RECAL 0x10
-#define WIN_RESTORE WIN_RECAL
-/*
- * 0x10->0x1F Reserved
- */
-#define WIN_READ 0x20 /* 28-Bit */
-#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG 0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT 0x24 /* 48-Bit */
-#define WIN_READDMA_EXT 0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
-/*
- * 0x28
- */
-#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
-/*
- * 0x2A->0x2F Reserved
- */
-#define WIN_WRITE 0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG 0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT 0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
-/*
- * 0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
-/*
- * 0x3D->0x3F Reserved
- */
-#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without retries */
-#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
-/*
- * 0x43->0x4F Reserved
- */
-#define WIN_FORMAT 0x50
-/*
- * 0x51->0x5F Reserved
- */
-#define WIN_INIT 0x60
-/*
- * 0x61->0x5F Reserved
- */
-#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
-#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE 0x90
-#define WIN_SPECIFY 0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE 0x92
-#define WIN_STANDBYNOW2 0x94
-#define WIN_STANDBY2 0x96
-#define WIN_SETIDLE2 0x97
-#define WIN_CHECKPOWERMODE2 0x98
-#define WIN_SLEEPNOW2 0x99
-/*
- * 0x9A VENDOR
- */
-#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
-#define WIN_QUEUED_SERVICE 0xA2
-#define WIN_SMART 0xB0 /* self-monitoring and reporting */
-#define CFA_ERASE_SECTORS 0xC0
-#define WIN_MULTREAD 0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE 0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA 0xC8 /* read sectors using DMA transfers */
-#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA 0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS 0xDA
-#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT 0xDC
-#define WIN_PREBOOT 0xDD
-#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1 0xE0
-#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1 0xE3
-#define WIN_READ_BUFFER 0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1 0xE5
-#define WIN_SLEEPNOW1 0xE6
-#define WIN_FLUSH_CACHE 0xE7
-#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
- /* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
-#define WIN_IDENTIFY 0xEC /* ask drive to identify itself */
-#define WIN_MEDIAEJECT 0xED
-#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES 0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST 0xF0
-#define WIN_SECURITY_SET_PASS 0xF1
-#define WIN_SECURITY_UNLOCK 0xF2
-#define WIN_SECURITY_ERASE_PREPARE 0xF3
-#define WIN_SECURITY_ERASE_UNIT 0xF4
-#define WIN_SECURITY_FREEZE_LOCK 0xF5
-#define WIN_SECURITY_DISABLE 0xF6
-#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum address */
-#define WIN_SET_MAX 0xF9
-#define DISABLE_SEAGATE 0xFB
-
-/* set to 1 set disable mult support */
-#define MAX_MULT_SECTORS 8
-
-struct IDEState;
-
-typedef void EndTransferFunc(struct IDEState *);
-
-typedef struct IDEState {
- /* ide config */
- int cylinders, heads, sectors;
- int64_t nb_sectors;
- int mult_sectors;
- int irq;
- /* ide regs */
- uint8_t feature;
- uint8_t error;
- uint16_t nsector; /* 0 is 256 to ease computations */
- uint8_t sector;
- uint8_t lcyl;
- uint8_t hcyl;
- uint8_t select;
- uint8_t status;
- /* 0x3f6 command, only meaningful for drive 0 */
- uint8_t cmd;
- /* depends on bit 4 in select, only meaningful for drive 0 */
- struct IDEState *cur_drive;
- BlockDriverState *bs;
- int req_nb_sectors; /* number of sectors per interrupt */
- EndTransferFunc *end_transfer_func;
- uint8_t *data_ptr;
- uint8_t *data_end;
- uint8_t io_buffer[MAX_MULT_SECTORS*512 + 4];
-} IDEState;
-
-IDEState ide_state[MAX_DISKS];
-
-static void padstr(char *str, const char *src, int len)
-{
- int i, v;
- for(i = 0; i < len; i++) {
- if (*src)
- v = *src++;
- else
- v = ' ';
- *(char *)((long)str ^ 1) = v;
- str++;
- }
-}
-
-static void ide_identify(IDEState *s)
-{
- uint16_t *p;
- unsigned int oldsize;
-
- memset(s->io_buffer, 0, 512);
- p = (uint16_t *)s->io_buffer;
- stw_raw(p + 0, 0x0040);
- stw_raw(p + 1, s->cylinders);
- stw_raw(p + 3, s->heads);
- stw_raw(p + 4, 512 * s->sectors); /* sectors */
- stw_raw(p + 5, 512); /* sector size */
- stw_raw(p + 6, s->sectors);
- stw_raw(p + 20, 3); /* buffer type */
- stw_raw(p + 21, 512); /* cache size in sectors */
- stw_raw(p + 22, 4); /* ecc bytes */
- padstr((uint8_t *)(p + 27), "QEMU HARDDISK", 40);
-#if MAX_MULT_SECTORS > 1
- stw_raw(p + 47, MAX_MULT_SECTORS);
-#endif
- stw_raw(p + 48, 1); /* dword I/O */
- stw_raw(p + 49, 1 << 9); /* LBA supported, no DMA */
- stw_raw(p + 51, 0x200); /* PIO transfer cycle */
- stw_raw(p + 52, 0x200); /* DMA transfer cycle */
- stw_raw(p + 54, s->cylinders);
- stw_raw(p + 55, s->heads);
- stw_raw(p + 56, s->sectors);
- oldsize = s->cylinders * s->heads * s->sectors;
- stw_raw(p + 57, oldsize);
- stw_raw(p + 58, oldsize >> 16);
- if (s->mult_sectors)
- stw_raw(p + 59, 0x100 | s->mult_sectors);
- stw_raw(p + 60, s->nb_sectors);
- stw_raw(p + 61, s->nb_sectors >> 16);
- stw_raw(p + 80, (1 << 1) | (1 << 2));
- stw_raw(p + 82, (1 << 14));
- stw_raw(p + 83, (1 << 14));
- stw_raw(p + 84, (1 << 14));
- stw_raw(p + 85, (1 << 14));
- stw_raw(p + 86, 0);
- stw_raw(p + 87, (1 << 14));
-}
-
-static inline void ide_abort_command(IDEState *s)
-{
- s->status = READY_STAT | ERR_STAT;
- s->error = ABRT_ERR;
-}
-
-static inline void ide_set_irq(IDEState *s)
-{
- if (!(ide_state[0].cmd & IDE_CMD_DISABLE_IRQ)) {
- pic_set_irq(s->irq, 1);
- }
-}
-
-/* prepare data transfer and tell what to do after */
-static void ide_transfer_start(IDEState *s, int size,
- EndTransferFunc *end_transfer_func)
-{
- s->end_transfer_func = end_transfer_func;
- s->data_ptr = s->io_buffer;
- s->data_end = s->io_buffer + size;
- s->status |= DRQ_STAT;
-}
-
-static void ide_transfer_stop(IDEState *s)
-{
- s->end_transfer_func = ide_transfer_stop;
- s->data_ptr = s->io_buffer;
- s->data_end = s->io_buffer;
- s->status &= ~DRQ_STAT;
-}
-
-static int64_t ide_get_sector(IDEState *s)
-{
- int64_t sector_num;
- if (s->select & 0x40) {
- /* lba */
- sector_num = ((s->select & 0x0f) << 24) | (s->hcyl << 16) |
- (s->lcyl << 8) | s->sector;
- } else {
- sector_num = ((s->hcyl << 8) | s->lcyl) * s->heads * s->sectors +
- (s->select & 0x0f) * s->sectors +
- (s->sector - 1);
- }
- return sector_num;
-}
-
-static void ide_set_sector(IDEState *s, int64_t sector_num)
-{
- unsigned int cyl, r;
- if (s->select & 0x40) {
- s->select = (s->select & 0xf0) | (sector_num >> 24);
- s->hcyl = (sector_num >> 16);
- s->lcyl = (sector_num >> 8);
- s->sector = (sector_num);
- } else {
- cyl = sector_num / (s->heads * s->sectors);
- r = sector_num % (s->heads * s->sectors);
- s->hcyl = cyl >> 8;
- s->lcyl = cyl;
- s->select = (s->select & 0xf0) | (r / s->sectors);
- s->sector = (r % s->sectors) + 1;
- }
-}
-
-static void ide_sector_read(IDEState *s)
-{
- int64_t sector_num;
- int ret, n;
-
- s->status = READY_STAT | SEEK_STAT;
- sector_num = ide_get_sector(s);
- n = s->nsector;
- if (n == 0) {
- /* no more sector to read from disk */
- ide_transfer_stop(s);
- } else {
-#if defined(DEBUG_IDE)
- printf("read sector=%Ld\n", sector_num);
-#endif
- if (n > s->req_nb_sectors)
- n = s->req_nb_sectors;
- ret = bdrv_read(s->bs, sector_num, s->io_buffer, n);
- ide_transfer_start(s, 512 * n, ide_sector_read);
- ide_set_irq(s);
- ide_set_sector(s, sector_num + n);
- s->nsector -= n;
- }
-}
-
-static void ide_sector_write(IDEState *s)
-{
- int64_t sector_num;
- int ret, n, n1;
-
- s->status = READY_STAT | SEEK_STAT;
- sector_num = ide_get_sector(s);
-#if defined(DEBUG_IDE)
- printf("write sector=%Ld\n", sector_num);
-#endif
- n = s->nsector;
- if (n > s->req_nb_sectors)
- n = s->req_nb_sectors;
- ret = bdrv_write(s->bs, sector_num, s->io_buffer, n);
- s->nsector -= n;
- if (s->nsector == 0) {
- /* no more sector to write */
- ide_transfer_stop(s);
- } else {
- n1 = s->nsector;
- if (n1 > s->req_nb_sectors)
- n1 = s->req_nb_sectors;
- ide_transfer_start(s, 512 * n1, ide_sector_write);
- }
- ide_set_sector(s, sector_num + n);
- ide_set_irq(s);
-}
-
-void ide_ioport_write(CPUX86State *env, uint32_t addr, uint32_t val)
-{
- IDEState *s = ide_state[0].cur_drive;
- int unit, n;
-
- addr &= 7;
-#ifdef DEBUG_IDE
- printf("IDE: write addr=0x%x val=0x%02x\n", addr, val);
-#endif
- switch(addr) {
- case 0:
- break;
- case 1:
- s->feature = val;
- break;
- case 2:
- if (val == 0)
- val = 256;
- s->nsector = val;
- break;
- case 3:
- s->sector = val;
- break;
- case 4:
- s->lcyl = val;
- break;
- case 5:
- s->hcyl = val;
- break;
- case 6:
- /* select drive */
- unit = (val >> 4) & 1;
- s = &ide_state[unit];
- ide_state[0].cur_drive = s;
- s->select = val;
- break;
- default:
- case 7:
- /* command */
-#if defined(DEBUG_IDE)
- printf("ide: CMD=%02x\n", val);
#endif
- switch(val) {
- case WIN_PIDENTIFY:
- case WIN_IDENTIFY:
- if (s->bs) {
- ide_identify(s);
- s->status = READY_STAT;
- ide_transfer_start(s, 512, ide_transfer_stop);
- } else {
- ide_abort_command(s);
- }
- ide_set_irq(s);
- break;
- case WIN_SPECIFY:
- case WIN_RECAL:
- s->status = READY_STAT;
- ide_set_irq(s);
- break;
- case WIN_SETMULT:
- if (s->nsector > MAX_MULT_SECTORS ||
- s->nsector == 0 ||
- (s->nsector & (s->nsector - 1)) != 0) {
- ide_abort_command(s);
- } else {
- s->mult_sectors = s->nsector;
- s->status = READY_STAT;
- }
- ide_set_irq(s);
- break;
- case WIN_READ:
- case WIN_READ_ONCE:
- s->req_nb_sectors = 1;
- ide_sector_read(s);
- break;
- case WIN_WRITE:
- case WIN_WRITE_ONCE:
- s->status = SEEK_STAT;
- s->req_nb_sectors = 1;
- ide_transfer_start(s, 512, ide_sector_write);
- break;
- case WIN_MULTREAD:
- if (!s->mult_sectors)
- goto abort_cmd;
- s->req_nb_sectors = s->mult_sectors;
- ide_sector_read(s);
- break;
- case WIN_MULTWRITE:
- if (!s->mult_sectors)
- goto abort_cmd;
- s->status = SEEK_STAT;
- s->req_nb_sectors = s->mult_sectors;
- n = s->nsector;
- if (n > s->req_nb_sectors)
- n = s->req_nb_sectors;
- ide_transfer_start(s, 512 * n, ide_sector_write);
- break;
- case WIN_READ_NATIVE_MAX:
- ide_set_sector(s, s->nb_sectors - 1);
- s->status = READY_STAT;
- ide_set_irq(s);
- break;
- default:
- abort_cmd:
- ide_abort_command(s);
- ide_set_irq(s);
- break;
- }
- }
-}
-
-uint32_t ide_ioport_read(CPUX86State *env, uint32_t addr)
-{
- IDEState *s = ide_state[0].cur_drive;
- int ret;
- addr &= 7;
- switch(addr) {
- case 0:
- ret = 0xff;
- break;
- case 1:
- ret = s->error;
- break;
- case 2:
- ret = s->nsector & 0xff;
- break;
- case 3:
- ret = s->sector;
- break;
- case 4:
- ret = s->lcyl;
- break;
- case 5:
- ret = s->hcyl;
- break;
- case 6:
- ret = s->select;
- break;
- default:
- case 7:
- ret = s->status;
- pic_set_irq(s->irq, 0);
- break;
- }
-#ifdef DEBUG_IDE
- printf("ide: read addr=0x%x val=%02x\n", addr, ret);
-#endif
- return ret;
-}
-
-uint32_t ide_status_read(CPUX86State *env, uint32_t addr)
-{
- IDEState *s = ide_state[0].cur_drive;
- int ret;
- ret = s->status;
-#ifdef DEBUG_IDE
- printf("ide: read status val=%02x\n", ret);
-#endif
- return ret;
-}
+/***********************************************************/
+/* PC floppy disk controler emulation glue */
+#define PC_FDC_DMA 0x2
+#define PC_FDC_IRQ 0x6
+#define PC_FDC_BASE 0x3F0
-void ide_cmd_write(CPUX86State *env, uint32_t addr, uint32_t val)
+static void fdctrl_register (unsigned char **disknames, int ro,
+ char boot_device)
{
- IDEState *s;
int i;
-#ifdef DEBUG_IDE
- printf("ide: write control val=%02x\n", val);
-#endif
- /* common for both drives */
- if (!(ide_state[0].cmd & IDE_CMD_RESET) &&
- (val & IDE_CMD_RESET)) {
- /* reset low to high */
- for(i = 0;i < 2; i++) {
- s = &ide_state[i];
- s->status = BUSY_STAT | SEEK_STAT;
- s->error = 0x01;
- }
- } else if ((ide_state[0].cmd & IDE_CMD_RESET) &&
- !(val & IDE_CMD_RESET)) {
- /* high to low */
- for(i = 0;i < 2; i++) {
- s = &ide_state[i];
- s->status = READY_STAT;
- /* set hard disk drive ID */
- s->select &= 0xf0; /* clear head */
- s->nsector = 1;
- s->sector = 1;
- if (s->nb_sectors == 0) {
- /* no disk present */
- s->lcyl = 0x12;
- s->hcyl = 0x34;
- } else {
- s->lcyl = 0;
- s->hcyl = 0;
- }
- }
+ fdctrl_init(PC_FDC_IRQ, PC_FDC_DMA, 0, PC_FDC_BASE, boot_device);
+ for (i = 0; i < MAX_FD; i++) {
+ if (disknames[i] != NULL)
+ fdctrl_disk_change(i, disknames[i], ro);
}
-
- ide_state[0].cmd = val;
-}
-
-void ide_data_writew(CPUX86State *env, uint32_t addr, uint32_t val)
-{
- IDEState *s = ide_state[0].cur_drive;
- uint8_t *p;
-
- p = s->data_ptr;
- *(uint16_t *)p = tswap16(val);
- p += 2;
- s->data_ptr = p;
- if (p >= s->data_end)
- s->end_transfer_func(s);
-}
-
-uint32_t ide_data_readw(CPUX86State *env, uint32_t addr)
-{
- IDEState *s = ide_state[0].cur_drive;
- uint8_t *p;
- int ret;
-
- p = s->data_ptr;
- ret = tswap16(*(uint16_t *)p);
- p += 2;
- s->data_ptr = p;
- if (p >= s->data_end)
- s->end_transfer_func(s);
- return ret;
-}
-
-void ide_data_writel(CPUX86State *env, uint32_t addr, uint32_t val)
-{
- IDEState *s = ide_state[0].cur_drive;
- uint8_t *p;
-
- p = s->data_ptr;
- *(uint32_t *)p = tswap32(val);
- p += 4;
- s->data_ptr = p;
- if (p >= s->data_end)
- s->end_transfer_func(s);
-}
-
-uint32_t ide_data_readl(CPUX86State *env, uint32_t addr)
-{
- IDEState *s = ide_state[0].cur_drive;
- uint8_t *p;
- int ret;
-
- p = s->data_ptr;
- ret = tswap32(*(uint32_t *)p);
- p += 4;
- s->data_ptr = p;
- if (p >= s->data_end)
- s->end_transfer_func(s);
- return ret;
-}
-
-void ide_reset(IDEState *s)
-{
- s->mult_sectors = MAX_MULT_SECTORS;
- s->status = READY_STAT;
- s->cur_drive = s;
- s->select = 0xa0;
-}
-
-struct partition {
- uint8_t boot_ind; /* 0x80 - active */
- uint8_t head; /* starting head */
- uint8_t sector; /* starting sector */
- uint8_t cyl; /* starting cylinder */
- uint8_t sys_ind; /* What partition type */
- uint8_t end_head; /* end head */
- uint8_t end_sector; /* end sector */
- uint8_t end_cyl; /* end cylinder */
- uint32_t start_sect; /* starting sector counting from 0 */
- uint32_t nr_sects; /* nr of sectors in partition */
-} __attribute__((packed));
-
-/* try to guess the IDE geometry from the MSDOS partition table */
-void ide_guess_geometry(IDEState *s)
-{
- uint8_t buf[512];
- int ret, i;
- struct partition *p;
- uint32_t nr_sects;
-
- if (s->cylinders != 0)
- return;
- ret = bdrv_read(s->bs, 0, buf, 1);
- if (ret < 0)
- return;
- /* test msdos magic */
- if (buf[510] != 0x55 || buf[511] != 0xaa)
- return;
- for(i = 0; i < 4; i++) {
- p = ((struct partition *)(buf + 0x1be)) + i;
- nr_sects = tswap32(p->nr_sects);
- if (nr_sects && p->end_head) {
- /* We make the assumption that the partition terminates on
- a cylinder boundary */
- s->heads = p->end_head + 1;
- s->sectors = p->end_sector & 63;
- s->cylinders = s->nb_sectors / (s->heads * s->sectors);
-#if 0
- printf("guessed partition: CHS=%d %d %d\n",
- s->cylinders, s->heads, s->sectors);
-#endif
- }
- }
-}
-
-void ide_init(void)
-{
- IDEState *s;
- int i, cylinders;
- int64_t nb_sectors;
-
- for(i = 0; i < MAX_DISKS; i++) {
- s = &ide_state[i];
- s->bs = bs_table[i];
- if (s->bs) {
- bdrv_get_geometry(s->bs, &nb_sectors);
- s->nb_sectors = nb_sectors;
- ide_guess_geometry(s);
- if (s->cylinders == 0) {
- /* if no geometry, use a LBA compatible one */
- cylinders = nb_sectors / (16 * 63);
- if (cylinders > 16383)
- cylinders = 16383;
- else if (cylinders < 2)
- cylinders = 2;
- s->cylinders = cylinders;
- s->heads = 16;
- s->sectors = 63;
- }
- }
- s->irq = 14;
- ide_reset(s);
- }
- register_ioport_write(0x1f0, 8, ide_ioport_write, 1);
- register_ioport_read(0x1f0, 8, ide_ioport_read, 1);
- register_ioport_read(0x3f6, 1, ide_status_read, 1);
- register_ioport_write(0x3f6, 1, ide_cmd_write, 1);
-
- /* data ports */
- register_ioport_write(0x1f0, 2, ide_data_writew, 2);
- register_ioport_read(0x1f0, 2, ide_data_readw, 2);
- register_ioport_write(0x1f0, 4, ide_data_writel, 4);
- register_ioport_read(0x1f0, 4, ide_data_readl, 4);
}
/***********************************************************/
/* Keyboard Commands */
#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */
#define KBD_CMD_ECHO 0xEE
+#define KBD_CMD_GET_ID 0xF2 /* get keyboard ID */
#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */
#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */
#define KBD_CMD_RESET_DISABLE 0xF5 /* reset and disable scanning */
int reset_requested;
/* update irq and KBD_STAT_[MOUSE_]OBF */
+/* XXX: not generating the irqs if KBD_MODE_DISABLE_KBD is set may be
+ incorrect, but it avoids having to simulate exact delays */
static void kbd_update_irq(KBDState *s)
{
int irq12_level, irq1_level;
if (s->mode & KBD_MODE_MOUSE_INT)
irq12_level = 1;
} else {
- if (s->mode & KBD_MODE_KBD_INT)
+ if ((s->mode & KBD_MODE_KBD_INT) &&
+ !(s->mode & KBD_MODE_DISABLE_KBD))
irq1_level = 1;
}
}
kbd_queue(s, keycode, 0);
}
-uint32_t kbd_read_status(CPUX86State *env, uint32_t addr)
+uint32_t kbd_read_status(CPUState *env, uint32_t addr)
{
KBDState *s = &kbd_state;
int val;
val = s->status;
-#if defined(DEBUG_KBD) && 0
+#if defined(DEBUG_KBD)
printf("kbd: read status=0x%02x\n", val);
#endif
return val;
}
-void kbd_write_command(CPUX86State *env, uint32_t addr, uint32_t val)
+void kbd_write_command(CPUState *env, uint32_t addr, uint32_t val)
{
KBDState *s = &kbd_state;
break;
case KBD_CCMD_KBD_DISABLE:
s->mode |= KBD_MODE_DISABLE_KBD;
+ kbd_update_irq(s);
break;
case KBD_CCMD_KBD_ENABLE:
s->mode &= ~KBD_MODE_DISABLE_KBD;
+ kbd_update_irq(s);
break;
case KBD_CCMD_READ_INPORT:
kbd_queue(s, 0x00, 0);
break;
case KBD_CCMD_READ_OUTPORT:
/* XXX: check that */
- val = 0x01 | (a20_enabled << 1);
+#ifdef TARGET_I386
+ val = 0x01 | (((cpu_single_env->a20_mask >> 20) & 1) << 1);
+#else
+ val = 0x01;
+#endif
if (s->status & KBD_STAT_OBF)
val |= 0x10;
if (s->status & KBD_STAT_MOUSE_OBF)
val |= 0x20;
kbd_queue(s, val, 0);
break;
+#ifdef TARGET_I386
case KBD_CCMD_ENABLE_A20:
cpu_x86_set_a20(env, 1);
break;
case KBD_CCMD_DISABLE_A20:
cpu_x86_set_a20(env, 0);
break;
+#endif
case KBD_CCMD_RESET:
reset_requested = 1;
- cpu_x86_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ break;
+ case 0xff:
+ /* ignore that - I don't know what is its use */
break;
default:
- fprintf(stderr, "vl: unsupported keyboard cmd=0x%02x\n", val);
+ fprintf(stderr, "qemu: unsupported keyboard cmd=0x%02x\n", val);
break;
}
}
-uint32_t kbd_read_data(CPUX86State *env, uint32_t addr)
+uint32_t kbd_read_data(CPUState *env, uint32_t addr)
{
KBDState *s = &kbd_state;
KBDQueue *q;
- int val;
+ int val, index;
q = &s->queues[0]; /* first check KBD data */
if (q->count == 0)
q = &s->queues[1]; /* then check AUX data */
if (q->count == 0) {
- /* XXX: return something else ? */
- val = 0;
+ /* NOTE: if no data left, we return the last keyboard one
+ (needed for EMM386) */
+ /* XXX: need a timer to do things correctly */
+ q = &s->queues[0];
+ index = q->rptr - 1;
+ if (index < 0)
+ index = KBD_QUEUE_SIZE - 1;
+ val = q->data[index];
} else {
val = q->data[q->rptr];
if (++q->rptr == KBD_QUEUE_SIZE)
case 0x05:
kbd_queue(s, KBD_REPLY_RESEND, 0);
break;
+ case KBD_CMD_GET_ID:
+ kbd_queue(s, KBD_REPLY_ACK, 0);
+ kbd_queue(s, 0xab, 0);
+ kbd_queue(s, 0x83, 0);
+ break;
case KBD_CMD_ECHO:
kbd_queue(s, KBD_CMD_ECHO, 0);
break;
}
}
-void kbd_write_data(CPUX86State *env, uint32_t addr, uint32_t val)
+void kbd_write_data(CPUState *env, uint32_t addr, uint32_t val)
{
KBDState *s = &kbd_state;
kbd_queue(s, val, 1);
break;
case KBD_CCMD_WRITE_OUTPORT:
+#ifdef TARGET_I386
cpu_x86_set_a20(env, (val >> 1) & 1);
+#endif
if (!(val & 1)) {
reset_requested = 1;
- cpu_x86_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
}
break;
case KBD_CCMD_WRITE_MOUSE:
void kbd_init(void)
{
kbd_reset(&kbd_state);
+#if defined (TARGET_I386) || defined (TARGET_PPC)
register_ioport_read(0x60, 1, kbd_read_data, 1);
register_ioport_write(0x60, 1, kbd_write_data, 1);
register_ioport_read(0x64, 1, kbd_read_status, 1);
register_ioport_write(0x64, 1, kbd_write_command, 1);
+#endif
}
/***********************************************************/
/* Bochs BIOS debug ports */
-
+#ifdef TARGET_I386
void bochs_bios_write(CPUX86State *env, uint32_t addr, uint32_t val)
{
switch(addr) {
register_ioport_write(0x500, 1, bochs_bios_write, 1);
register_ioport_write(0x503, 1, bochs_bios_write, 1);
}
+#endif
/***********************************************************/
/* dumb display */
gui_refresh_pending = 1;
}
+ /* XXX: seems dangerous to run that here. */
+ DMA_run();
+ SB16_run();
+
if (gui_refresh_pending || timer_irq_pending) {
/* just exit from the cpu to have a chance to handle timers */
- cpu_x86_interrupt(global_env, CPU_INTERRUPT_EXIT);
+ cpu_interrupt(global_env, CPU_INTERRUPT_EXIT);
}
}
int main_loop(void *opaque)
{
- struct pollfd ufds[3], *pf, *serial_ufd, *net_ufd, *gdb_ufd;
+ struct pollfd ufds[3], *pf, *serial_ufd, *gdb_ufd;
+#if defined (TARGET_I386)
+ struct pollfd *net_ufd;
+#endif
int ret, n, timeout, serial_ok;
uint8_t ch;
CPUState *env = global_env;
serial_ok = 1;
cpu_enable_ticks();
for(;;) {
- ret = cpu_x86_exec(env);
+#if defined (DO_TB_FLUSH)
+ tb_flush();
+#endif
+ ret = cpu_exec(env);
if (reset_requested) {
ret = EXCP_INTERRUPT;
break;
pf->events = POLLIN;
pf++;
}
+#if defined (TARGET_I386)
net_ufd = NULL;
if (net_fd > 0 && ne2000_can_receive(&ne2000_state)) {
net_ufd = pf;
pf->events = POLLIN;
pf++;
}
+#endif
gdb_ufd = NULL;
if (gdbstub_fd > 0) {
gdb_ufd = pf;
serial_ok = 0;
}
}
+#if defined (TARGET_I386)
if (net_ufd && (net_ufd->revents & POLLIN)) {
uint8_t buf[MAX_ETH_FRAME_SIZE];
ne2000_receive(&ne2000_state, buf, n);
}
}
+#endif
if (gdb_ufd && (gdb_ufd->revents & POLLIN)) {
uint8_t buf[1];
/* stop emulation if requested by gdb */
/* timer IRQ */
if (timer_irq_pending) {
+#if defined (TARGET_I386)
pic_set_irq(0, 1);
pic_set_irq(0, 0);
timer_irq_pending = 0;
+ /* XXX: RTC test */
+ if (cmos_data[RTC_REG_B] & 0x50) {
+ pic_set_irq(8, 1);
+ }
+#endif
}
/* VGA */
"'disk_image' is a raw hard image image for IDE hard disk 0\n"
"\n"
"Standard options:\n"
- "-hda file use 'file' as IDE hard disk 0 image\n"
- "-hdb file use 'file' as IDE hard disk 1 image\n"
+ "-fda/-fdb file use 'file' as floppy disk 0/1 image\n"
+ "-hda/-hdb file use 'file' as IDE hard disk 0/1 image\n"
+ "-hdc/-hdd file use 'file' as IDE hard disk 2/3 image\n"
+ "-cdrom file use 'file' as IDE cdrom 2 image\n"
+ "-boot [a|b|c|d] boot on floppy (a, b), hard disk (c) or CD-ROM (d)\n"
"-snapshot write to temporary files instead of disk image files\n"
"-m megs set virtual RAM size to megs MB\n"
"-n script set network init script [default=%s]\n"
"Debug/Expert options:\n"
"-s wait gdb connection to port %d\n"
"-p port change gdb connection port\n"
- "-d output log in /tmp/vl.log\n"
+ "-d output log to %s\n"
"-hdachs c,h,s force hard disk 0 geometry (usually qemu can guess it)\n"
"-L path set the directory for the BIOS and VGA BIOS\n"
"\n"
"qemu-fast",
#endif
DEFAULT_NETWORK_SCRIPT,
- DEFAULT_GDBSTUB_PORT);
+ DEFAULT_GDBSTUB_PORT,
+ "/tmp/qemu.log");
term_print_help();
#ifndef CONFIG_SOFTMMU
printf("\n"
{ "kernel", 1, NULL, 0, },
{ "append", 1, NULL, 0, },
{ "tun-fd", 1, NULL, 0, },
+ { "hdc", 1, NULL, 0, },
+ { "hdd", 1, NULL, 0, },
+ { "cdrom", 1, NULL, 0, },
+ { "boot", 1, NULL, 0, },
+ { "fda", 1, NULL, 0, },
+ { "fdb", 1, NULL, 0, },
{ NULL, 0, NULL, 0 },
};
#ifdef CONFIG_SDL
/* SDL use the pthreads and they modify sigaction. We don't
want that. */
-#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 3)
+#if __GLIBC__ > 2 || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 2)
extern void __libc_sigaction();
#define sigaction(sig, act, oact) __libc_sigaction(sig, act, oact)
#else
int main(int argc, char **argv)
{
int c, ret, initrd_size, i, use_gdbstub, gdbstub_port, long_index;
- int snapshot, linux_boot, total_ram_size;
+ int snapshot, linux_boot;
+#if defined (TARGET_I386)
struct linux_params *params;
+#endif
struct sigaction act;
struct itimerval itv;
- CPUX86State *env;
+ CPUState *env;
const char *initrd_filename;
- const char *hd_filename[MAX_DISKS];
+ const char *hd_filename[MAX_DISKS], *fd_filename[MAX_FD];
const char *kernel_filename, *kernel_cmdline;
DisplayState *ds = &display_state;
/* we never want that malloc() uses mmap() */
mallopt(M_MMAP_THRESHOLD, 4096 * 1024);
initrd_filename = NULL;
+ for(i = 0; i < MAX_FD; i++)
+ fd_filename[i] = NULL;
for(i = 0; i < MAX_DISKS; i++)
hd_filename[i] = NULL;
- phys_ram_size = 32 * 1024 * 1024;
+ ram_size = 32 * 1024 * 1024;
vga_ram_size = VGA_RAM_SIZE;
+#if defined (TARGET_I386)
pstrcpy(network_script, sizeof(network_script), DEFAULT_NETWORK_SCRIPT);
+#endif
use_gdbstub = 0;
gdbstub_port = DEFAULT_GDBSTUB_PORT;
snapshot = 0;
secs = strtol(p, (char **)&p, 0);
if (*p != '\0')
goto chs_fail;
- ide_state[0].cylinders = cyls;
- ide_state[0].heads = heads;
- ide_state[0].sectors = secs;
+ ide_set_geometry(0, cyls, heads, secs);
chs_fail: ;
}
break;
case 7:
kernel_cmdline = optarg;
break;
+#if defined (TARGET_I386)
case 8:
net_fd = atoi(optarg);
break;
+#endif
+ case 9:
+ hd_filename[2] = optarg;
+ break;
+ case 10:
+ hd_filename[3] = optarg;
+ break;
+ case 11:
+ hd_filename[2] = optarg;
+ ide_set_cdrom(2, 1);
+ break;
+ case 12:
+ boot_device = optarg[0];
+ if (boot_device != 'a' && boot_device != 'b' &&
+ boot_device != 'c' && boot_device != 'd') {
+ fprintf(stderr, "qemu: invalid boot device '%c'\n", boot_device);
+ exit(1);
+ }
+ break;
+ case 13:
+ fd_filename[0] = optarg;
+ break;
+ case 14:
+ fd_filename[1] = optarg;
+ break;
}
break;
case 'h':
help();
break;
case 'm':
- phys_ram_size = atoi(optarg) * 1024 * 1024;
- if (phys_ram_size <= 0)
+ ram_size = atoi(optarg) * 1024 * 1024;
+ if (ram_size <= 0)
help();
- if (phys_ram_size > PHYS_RAM_MAX_SIZE) {
- fprintf(stderr, "vl: at most %d MB RAM can be simulated\n",
+ if (ram_size > PHYS_RAM_MAX_SIZE) {
+ fprintf(stderr, "qemu: at most %d MB RAM can be simulated\n",
PHYS_RAM_MAX_SIZE / (1024 * 1024));
exit(1);
}
case 'd':
cpu_set_log(CPU_LOG_ALL);
break;
+#if defined (TARGET_I386)
case 'n':
pstrcpy(network_script, sizeof(network_script), optarg);
break;
+#endif
case 's':
use_gdbstub = 1;
break;
linux_boot = (kernel_filename != NULL);
- if (!linux_boot && hd_filename[0] == '\0')
+ if (!linux_boot && hd_filename[0] == '\0' && hd_filename[2] == '\0' &&
+ fd_filename[0] == '\0')
help();
+
+ /* boot to cd by default if no hard disk */
+ if (hd_filename[0] == '\0' && boot_device == 'c') {
+ if (fd_filename[0] != '\0')
+ boot_device = 'a';
+ else
+ boot_device = 'd';
+ }
- /* init debug */
+#if !defined(CONFIG_SOFTMMU)
+ /* must avoid mmap() usage of glibc by setting a buffer "by hand" */
+ {
+ static uint8_t stdout_buf[4096];
+ setvbuf(stdout, stdout_buf, _IOLBF, sizeof(stdout_buf));
+ }
+#else
setvbuf(stdout, NULL, _IOLBF, 0);
+#endif
/* init network tun interface */
+#if defined (TARGET_I386)
if (net_fd < 0)
net_init();
+#endif
/* init the memory */
- total_ram_size = phys_ram_size + vga_ram_size;
+ phys_ram_size = ram_size + vga_ram_size;
#ifdef CONFIG_SOFTMMU
- phys_ram_base = malloc(total_ram_size);
+ phys_ram_base = memalign(TARGET_PAGE_SIZE, phys_ram_size);
if (!phys_ram_base) {
fprintf(stderr, "Could not allocate physical memory\n");
exit(1);
phys_ram_file);
exit(1);
}
- ftruncate(phys_ram_fd, total_ram_size);
+ ftruncate(phys_ram_fd, phys_ram_size);
unlink(phys_ram_file);
- phys_ram_base = mmap(get_mmap_addr(total_ram_size),
- total_ram_size,
+ phys_ram_base = mmap(get_mmap_addr(phys_ram_size),
+ phys_ram_size,
PROT_WRITE | PROT_READ, MAP_SHARED | MAP_FIXED,
phys_ram_fd, 0);
if (phys_ram_base == MAP_FAILED) {
if (hd_filename[i]) {
bs_table[i] = bdrv_open(hd_filename[i], snapshot);
if (!bs_table[i]) {
- fprintf(stderr, "vl: could not open hard disk image '%s\n",
+ fprintf(stderr, "qemu: could not open hard disk image '%s\n",
hd_filename[i]);
exit(1);
}
init_ioports();
/* allocate RAM */
- cpu_register_physical_memory(0, phys_ram_size, 0);
+ cpu_register_physical_memory(0, ram_size, 0);
if (linux_boot) {
/* now we can load the kernel */
ret = load_kernel(kernel_filename, phys_ram_base + KERNEL_LOAD_ADDR);
if (ret < 0) {
- fprintf(stderr, "vl: could not load kernel '%s'\n",
+ fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
if (initrd_filename) {
initrd_size = load_image(initrd_filename, phys_ram_base + INITRD_LOAD_ADDR);
if (initrd_size < 0) {
- fprintf(stderr, "vl: could not load initial ram disk '%s'\n",
+ fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
}
/* init kernel params */
+#ifdef TARGET_I386
params = (void *)(phys_ram_base + KERNEL_PARAMS_ADDR);
memset(params, 0, sizeof(struct linux_params));
params->mount_root_rdonly = 0;
stw_raw(¶ms->cl_magic, 0xA33F);
stw_raw(¶ms->cl_offset, params->commandline - (uint8_t *)params);
- stl_raw(¶ms->alt_mem_k, (phys_ram_size / 1024) - 1024);
+ stl_raw(¶ms->alt_mem_k, (ram_size / 1024) - 1024);
pstrcat(params->commandline, sizeof(params->commandline), kernel_cmdline);
params->loader_type = 0x01;
if (initrd_size > 0) {
params->orig_video_cols = 80;
/* setup basic memory access */
- env->cr[0] = 0x00000033;
- cpu_x86_init_mmu(env);
+ cpu_x86_update_cr0(env, 0x00000033);
memset(params->idt_table, 0, sizeof(params->idt_table));
env->eip = KERNEL_LOAD_ADDR;
env->regs[R_ESI] = KERNEL_PARAMS_ADDR;
env->eflags = 0x2;
-
+#elif defined (TARGET_PPC)
+ PPC_init_hw(env, ram_size, KERNEL_LOAD_ADDR, ret,
+ KERNEL_STACK_ADDR, boot_device);
+#endif
} else {
char buf[1024];
/* RAW PC boot */
-
+#if defined(TARGET_I386)
/* BIOS load */
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
ret = load_image(buf, phys_ram_base + 0x000f0000);
if (ret != 0x10000) {
- fprintf(stderr, "vl: could not load PC bios '%s'\n", buf);
+ fprintf(stderr, "qemu: could not load PC bios '%s'\n", buf);
exit(1);
}
ret = load_image(buf, phys_ram_base + 0x000c0000);
/* setup basic memory access */
- env->cr[0] = 0x60000010;
- cpu_x86_init_mmu(env);
-
- env->idt.limit = 0xffff;
- env->gdt.limit = 0xffff;
- env->ldt.limit = 0xffff;
-
- /* not correct (CS base=0xffff0000) */
- cpu_x86_load_seg_cache(env, R_CS, 0xf000, (uint8_t *)0x000f0000, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_DS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_ES, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_SS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_FS, 0, NULL, 0xffff, 0);
- cpu_x86_load_seg_cache(env, R_GS, 0, NULL, 0xffff, 0);
-
- env->eip = 0xfff0;
- env->regs[R_EDX] = 0x600; /* indicate P6 processor */
-
- env->eflags = 0x2;
+ cpu_register_physical_memory(0xc0000, 0x10000, 0xc0000 | IO_MEM_ROM);
+ cpu_register_physical_memory(0xf0000, 0x10000, 0xf0000 | IO_MEM_ROM);
bochs_bios_init();
+#elif defined(TARGET_PPC)
+ /* allocate ROM */
+ // snprintf(buf, sizeof(buf), "%s/%s", bios_dir, BIOS_FILENAME);
+ snprintf(buf, sizeof(buf), "%s", BIOS_FILENAME);
+ printf("load BIOS at %p\n", phys_ram_base + 0x000f0000);
+ ret = load_image(buf, phys_ram_base + 0x000f0000);
+ if (ret != 0x10000) {
+ fprintf(stderr, "qemu: could not load PPC bios '%s' (%d)\n%m\n",
+ buf, ret);
+ exit(1);
+ }
+#endif
}
/* terminal init */
/* init basic PC hardware */
register_ioport_write(0x80, 1, ioport80_write, 1);
- vga_init(ds, phys_ram_base + phys_ram_size, phys_ram_size,
+ vga_initialize(ds, phys_ram_base + ram_size, ram_size,
vga_ram_size);
+#if defined (TARGET_I386)
cmos_init();
+#endif
pic_init();
pit_init();
serial_init();
+#if defined (TARGET_I386)
ne2000_init();
+#endif
ide_init();
kbd_init();
-
+ AUD_init();
+ DMA_init();
+#if defined (TARGET_I386)
+ SB16_init();
+#endif
+#if defined (TARGET_PPC)
+ PPC_end_init();
+#endif
+ fdctrl_register((unsigned char **)fd_filename, snapshot, boot_device);
/* setup cpu signal handlers for MMU / self modifying code handling */
sigfillset(&act.sa_mask);
act.sa_flags = SA_SIGINFO;