/* Needed early for HOST_BSD etc. */
#include "config-host.h"
+/* Needed early to override system queue definitions on BSD */
+#include "sys-queue.h"
#ifndef _WIN32
#include <libgen.h>
#include <pty.h>
#include <malloc.h>
#include <linux/rtc.h>
+#include <sys/prctl.h>
/* For the benefit of older linux systems which don't supply it,
we use a local copy of hpet.h. */
#include "qemu_socket.h"
-#if defined(CONFIG_SLIRP)
-#include "libslirp.h"
-#endif
+#include "slirp/libslirp.h"
-//#define DEBUG_UNUSED_IOPORT
-//#define DEBUG_IOPORT
//#define DEBUG_NET
//#define DEBUG_SLIRP
-
-#ifdef DEBUG_IOPORT
-# define LOG_IOPORT(...) qemu_log_mask(CPU_LOG_IOPORT, ## __VA_ARGS__)
-#else
-# define LOG_IOPORT(...) do { } while (0)
-#endif
-
#define DEFAULT_RAM_SIZE 128
/* Max number of USB devices that can be specified on the commandline. */
/* Max number of bluetooth switches on the commandline. */
#define MAX_BT_CMDLINE 10
-/* XXX: use a two level table to limit memory usage */
-#define MAX_IOPORTS 65536
-
static const char *data_dir;
const char *bios_name = NULL;
-static void *ioport_opaque[MAX_IOPORTS];
-static IOPortReadFunc *ioport_read_table[3][MAX_IOPORTS];
-static IOPortWriteFunc *ioport_write_table[3][MAX_IOPORTS];
/* Note: drives_table[MAX_DRIVES] is a dummy block driver if none available
to store the VM snapshots */
DriveInfo drives_table[MAX_DRIVES+1];
int nb_nics;
NICInfo nd_table[MAX_NICS];
int vm_running;
-static int autostart;
+int autostart;
static int rtc_utc = 1;
static int rtc_date_offset = -1; /* -1 means no change */
int cirrus_vga_enabled = 1;
const char *vnc_display;
int acpi_enabled = 1;
int no_hpet = 0;
-int no_virtio_balloon = 0;
+int virtio_balloon = 1;
+const char *virtio_balloon_devaddr;
int fd_bootchk = 1;
int no_reboot = 0;
int no_shutdown = 0;
#endif
int nb_drives_opt;
struct drive_opt drives_opt[MAX_DRIVES];
+int boot_menu;
int nb_numa_nodes;
uint64_t node_mem[MAX_NODES];
uint8_t qemu_uuid[16];
+static QEMUBootSetHandler *boot_set_handler;
+static void *boot_set_opaque;
+
/***********************************************************/
/* x86 ISA bus support */
target_phys_addr_t isa_mem_base = 0;
PicState2 *isa_pic;
-static IOPortReadFunc default_ioport_readb, default_ioport_readw, default_ioport_readl;
-static IOPortWriteFunc default_ioport_writeb, default_ioport_writew, default_ioport_writel;
-
-static uint32_t ioport_read(int index, uint32_t address)
-{
- static IOPortReadFunc *default_func[3] = {
- default_ioport_readb,
- default_ioport_readw,
- default_ioport_readl
- };
- IOPortReadFunc *func = ioport_read_table[index][address];
- if (!func)
- func = default_func[index];
- return func(ioport_opaque[address], address);
-}
-
-static void ioport_write(int index, uint32_t address, uint32_t data)
-{
- static IOPortWriteFunc *default_func[3] = {
- default_ioport_writeb,
- default_ioport_writew,
- default_ioport_writel
- };
- IOPortWriteFunc *func = ioport_write_table[index][address];
- if (!func)
- func = default_func[index];
- func(ioport_opaque[address], address, data);
-}
-
-static uint32_t default_ioport_readb(void *opaque, uint32_t address)
-{
-#ifdef DEBUG_UNUSED_IOPORT
- fprintf(stderr, "unused inb: port=0x%04x\n", address);
-#endif
- return 0xff;
-}
-
-static void default_ioport_writeb(void *opaque, uint32_t address, uint32_t data)
-{
-#ifdef DEBUG_UNUSED_IOPORT
- fprintf(stderr, "unused outb: port=0x%04x data=0x%02x\n", address, data);
-#endif
-}
-
-/* default is to make two byte accesses */
-static uint32_t default_ioport_readw(void *opaque, uint32_t address)
-{
- uint32_t data;
- data = ioport_read(0, address);
- address = (address + 1) & (MAX_IOPORTS - 1);
- data |= ioport_read(0, address) << 8;
- return data;
-}
-
-static void default_ioport_writew(void *opaque, uint32_t address, uint32_t data)
-{
- ioport_write(0, address, data & 0xff);
- address = (address + 1) & (MAX_IOPORTS - 1);
- ioport_write(0, address, (data >> 8) & 0xff);
-}
-
-static uint32_t default_ioport_readl(void *opaque, uint32_t address)
-{
-#ifdef DEBUG_UNUSED_IOPORT
- fprintf(stderr, "unused inl: port=0x%04x\n", address);
-#endif
- return 0xffffffff;
-}
-
-static void default_ioport_writel(void *opaque, uint32_t address, uint32_t data)
-{
-#ifdef DEBUG_UNUSED_IOPORT
- fprintf(stderr, "unused outl: port=0x%04x data=0x%02x\n", address, data);
-#endif
-}
-
-/* size is the word size in byte */
-int register_ioport_read(int start, int length, int size,
- IOPortReadFunc *func, void *opaque)
-{
- int i, bsize;
-
- if (size == 1) {
- bsize = 0;
- } else if (size == 2) {
- bsize = 1;
- } else if (size == 4) {
- bsize = 2;
- } else {
- hw_error("register_ioport_read: invalid size");
- return -1;
- }
- for(i = start; i < start + length; i += size) {
- ioport_read_table[bsize][i] = func;
- if (ioport_opaque[i] != NULL && ioport_opaque[i] != opaque)
- hw_error("register_ioport_read: invalid opaque");
- ioport_opaque[i] = opaque;
- }
- return 0;
-}
-
-/* size is the word size in byte */
-int register_ioport_write(int start, int length, int size,
- IOPortWriteFunc *func, void *opaque)
-{
- int i, bsize;
-
- if (size == 1) {
- bsize = 0;
- } else if (size == 2) {
- bsize = 1;
- } else if (size == 4) {
- bsize = 2;
- } else {
- hw_error("register_ioport_write: invalid size");
- return -1;
- }
- for(i = start; i < start + length; i += size) {
- ioport_write_table[bsize][i] = func;
- if (ioport_opaque[i] != NULL && ioport_opaque[i] != opaque)
- hw_error("register_ioport_write: invalid opaque");
- ioport_opaque[i] = opaque;
- }
- return 0;
-}
-
-void isa_unassign_ioport(int start, int length)
-{
- int i;
-
- for(i = start; i < start + length; i++) {
- ioport_read_table[0][i] = default_ioport_readb;
- ioport_read_table[1][i] = default_ioport_readw;
- ioport_read_table[2][i] = default_ioport_readl;
-
- ioport_write_table[0][i] = default_ioport_writeb;
- ioport_write_table[1][i] = default_ioport_writew;
- ioport_write_table[2][i] = default_ioport_writel;
-
- ioport_opaque[i] = NULL;
- }
-}
-
-/***********************************************************/
-
-void cpu_outb(CPUState *env, int addr, int val)
-{
- LOG_IOPORT("outb: %04x %02x\n", addr, val);
- ioport_write(0, addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
-}
-
-void cpu_outw(CPUState *env, int addr, int val)
-{
- LOG_IOPORT("outw: %04x %04x\n", addr, val);
- ioport_write(1, addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
-}
-
-void cpu_outl(CPUState *env, int addr, int val)
-{
- LOG_IOPORT("outl: %04x %08x\n", addr, val);
- ioport_write(2, addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
-}
-
-int cpu_inb(CPUState *env, int addr)
-{
- int val;
- val = ioport_read(0, addr);
- LOG_IOPORT("inb : %04x %02x\n", addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
- return val;
-}
-
-int cpu_inw(CPUState *env, int addr)
-{
- int val;
- val = ioport_read(1, addr);
- LOG_IOPORT("inw : %04x %04x\n", addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
- return val;
-}
-
-int cpu_inl(CPUState *env, int addr)
-{
- int val;
- val = ioport_read(2, addr);
- LOG_IOPORT("inl : %04x %08x\n", addr, val);
-#ifdef CONFIG_KQEMU
- if (env)
- env->last_io_time = cpu_get_time_fast();
-#endif
- return val;
-}
-
/***********************************************************/
void hw_error(const char *fmt, ...)
{
va_end(ap);
abort();
}
+
+static void set_proc_name(const char *s)
+{
+#ifdef __linux__
+ char name[16];
+ if (!s)
+ return;
+ name[sizeof(name) - 1] = 0;
+ strncpy(name, s, sizeof(name));
+ /* Could rewrite argv[0] too, but that's a bit more complicated.
+ This simple way is enough for `top'. */
+ prctl(PR_SET_NAME, name);
+#endif
+}
/***************/
/* ballooning */
unit_id = -1;
translation = BIOS_ATA_TRANSLATION_AUTO;
index = -1;
- cache = 3;
+ cache = 1;
if (machine->use_scsi) {
type = IF_SCSI;
bdrv_flags |= BDRV_O_NOCACHE;
else if (cache == 2) /* write-back */
bdrv_flags |= BDRV_O_CACHE_WB;
- else if (cache == 3) /* not specified */
- bdrv_flags |= BDRV_O_CACHE_DEF;
if (bdrv_open2(bdrv, file, bdrv_flags, drv) < 0) {
fprintf(stderr, "qemu: could not open disk image %s\n",
file);
return drives_table_idx;
}
+void qemu_register_boot_set(QEMUBootSetHandler *func, void *opaque)
+{
+ boot_set_handler = func;
+ boot_set_opaque = opaque;
+}
+
+int qemu_boot_set(const char *boot_devices)
+{
+ if (!boot_set_handler) {
+ return -EINVAL;
+ }
+ return boot_set_handler(boot_set_opaque, boot_devices);
+}
+
+static int parse_bootdevices(char *devices)
+{
+ /* We just do some generic consistency checks */
+ const char *p;
+ int bitmap = 0;
+
+ for (p = devices; *p != '\0'; p++) {
+ /* Allowed boot devices are:
+ * a-b: floppy disk drives
+ * c-f: IDE disk drives
+ * g-m: machine implementation dependant drives
+ * n-p: network devices
+ * It's up to each machine implementation to check if the given boot
+ * devices match the actual hardware implementation and firmware
+ * features.
+ */
+ if (*p < 'a' || *p > 'p') {
+ fprintf(stderr, "Invalid boot device '%c'\n", *p);
+ exit(1);
+ }
+ if (bitmap & (1 << (*p - 'a'))) {
+ fprintf(stderr, "Boot device '%c' was given twice\n", *p);
+ exit(1);
+ }
+ bitmap |= 1 << (*p - 'a');
+ }
+ return bitmap;
+}
+
+static void restore_boot_devices(void *opaque)
+{
+ char *standard_boot_devices = opaque;
+
+ qemu_boot_set(standard_boot_devices);
+
+ qemu_unregister_reset(restore_boot_devices, standard_boot_devices);
+ qemu_free(standard_boot_devices);
+}
+
static void numa_add(const char *optarg)
{
char option[128];
for(m = first_machine; m != NULL; m = m->next) {
if (!strcmp(m->name, name))
return m;
+ if (m->alias && !strcmp(m->alias, name))
+ return m;
}
return NULL;
}
/* reset/shutdown handler */
typedef struct QEMUResetEntry {
+ TAILQ_ENTRY(QEMUResetEntry) entry;
QEMUResetHandler *func;
void *opaque;
- int order;
- struct QEMUResetEntry *next;
} QEMUResetEntry;
-static QEMUResetEntry *first_reset_entry;
+static TAILQ_HEAD(reset_handlers, QEMUResetEntry) reset_handlers =
+ TAILQ_HEAD_INITIALIZER(reset_handlers);
static int reset_requested;
static int shutdown_requested;
static int powerdown_requested;
}
}
-void qemu_register_reset(QEMUResetHandler *func, int order, void *opaque)
+void qemu_register_reset(QEMUResetHandler *func, void *opaque)
{
- QEMUResetEntry **pre, *re;
+ QEMUResetEntry *re = qemu_mallocz(sizeof(QEMUResetEntry));
- pre = &first_reset_entry;
- while (*pre != NULL && (*pre)->order >= order) {
- pre = &(*pre)->next;
- }
- re = qemu_mallocz(sizeof(QEMUResetEntry));
re->func = func;
re->opaque = opaque;
- re->order = order;
- re->next = NULL;
- *pre = re;
+ TAILQ_INSERT_TAIL(&reset_handlers, re, entry);
}
-void qemu_system_reset(void)
+void qemu_unregister_reset(QEMUResetHandler *func, void *opaque)
{
QEMUResetEntry *re;
+ TAILQ_FOREACH(re, &reset_handlers, entry) {
+ if (re->func == func && re->opaque == opaque) {
+ TAILQ_REMOVE(&reset_handlers, re, entry);
+ qemu_free(re);
+ return;
+ }
+ }
+}
+
+void qemu_system_reset(void)
+{
+ QEMUResetEntry *re, *nre;
+
/* reset all devices */
- for(re = first_reset_entry; re != NULL; re = re->next) {
+ TAILQ_FOREACH_SAFE(re, &reset_handlers, entry, nre) {
re->func(re->opaque);
}
}
tv.tv_sec = timeout / 1000;
tv.tv_usec = (timeout % 1000) * 1000;
-#if defined(CONFIG_SLIRP)
- if (slirp_is_inited()) {
- slirp_select_fill(&nfds, &rfds, &wfds, &xfds);
- }
-#endif
+ slirp_select_fill(&nfds, &rfds, &wfds, &xfds);
+
qemu_mutex_unlock_iothread();
ret = select(nfds + 1, &rfds, &wfds, &xfds, &tv);
qemu_mutex_lock_iothread();
pioh = &ioh->next;
}
}
-#if defined(CONFIG_SLIRP)
- if (slirp_is_inited()) {
- if (ret < 0) {
- FD_ZERO(&rfds);
- FD_ZERO(&wfds);
- FD_ZERO(&xfds);
- }
- slirp_select_poll(&rfds, &wfds, &xfds);
- }
-#endif
+
+ slirp_select_poll(&rfds, &wfds, &xfds, (ret < 0));
/* rearm timer, if not periodic */
if (alarm_timer->flags & ALARM_FLAG_EXPIRED) {
}
}
+#ifdef TARGET_I386
+static int balloon_parse(const char *arg)
+{
+ char buf[128];
+ const char *p;
+
+ if (!strcmp(arg, "none")) {
+ virtio_balloon = 0;
+ } else if (!strncmp(arg, "virtio", 6)) {
+ virtio_balloon = 1;
+ if (arg[6] == ',') {
+ p = arg + 7;
+ if (get_param_value(buf, sizeof(buf), "addr", p)) {
+ virtio_balloon_devaddr = strdup(buf);
+ }
+ }
+ } else {
+ return -1;
+ }
+ return 0;
+}
+#endif
+
#ifdef _WIN32
static BOOL WINAPI qemu_ctrl_handler(DWORD type)
{
int snapshot, linux_boot, net_boot;
const char *initrd_filename;
const char *kernel_filename, *kernel_cmdline;
- const char *boot_devices = "";
+ char boot_devices[33] = "cad"; /* default to HD->floppy->CD-ROM */
DisplayState *ds;
DisplayChangeListener *dcl;
int cyls, heads, secs, translation;
QEMUMachine *m;
printf("Supported machines are:\n");
for(m = first_machine; m != NULL; m = m->next) {
+ if (m->alias)
+ printf("%-10s %s (alias of %s)\n",
+ m->alias, m->desc, m->name);
printf("%-10s %s%s\n",
m->name, m->desc,
m->is_default ? " (default)" : "");
drive_add(optarg, CDROM_ALIAS);
break;
case QEMU_OPTION_boot:
- boot_devices = optarg;
- /* We just do some generic consistency checks */
{
- /* Could easily be extended to 64 devices if needed */
- const char *p;
-
- boot_devices_bitmap = 0;
- for (p = boot_devices; *p != '\0'; p++) {
- /* Allowed boot devices are:
- * a b : floppy disk drives
- * c ... f : IDE disk drives
- * g ... m : machine implementation dependant drives
- * n ... p : network devices
- * It's up to each machine implementation to check
- * if the given boot devices match the actual hardware
- * implementation and firmware features.
- */
- if (*p < 'a' || *p > 'q') {
- fprintf(stderr, "Invalid boot device '%c'\n", *p);
- exit(1);
+ static const char * const params[] = {
+ "order", "once", "menu", NULL
+ };
+ char buf[sizeof(boot_devices)];
+ char *standard_boot_devices;
+ int legacy = 0;
+
+ if (!strchr(optarg, '=')) {
+ legacy = 1;
+ pstrcpy(buf, sizeof(buf), optarg);
+ } else if (check_params(buf, sizeof(buf), params, optarg) < 0) {
+ fprintf(stderr,
+ "qemu: unknown boot parameter '%s' in '%s'\n",
+ buf, optarg);
+ exit(1);
+ }
+
+ if (legacy ||
+ get_param_value(buf, sizeof(buf), "order", optarg)) {
+ boot_devices_bitmap = parse_bootdevices(buf);
+ pstrcpy(boot_devices, sizeof(boot_devices), buf);
+ }
+ if (!legacy) {
+ if (get_param_value(buf, sizeof(buf),
+ "once", optarg)) {
+ boot_devices_bitmap |= parse_bootdevices(buf);
+ standard_boot_devices = qemu_strdup(boot_devices);
+ pstrcpy(boot_devices, sizeof(boot_devices), buf);
+ qemu_register_reset(restore_boot_devices,
+ standard_boot_devices);
}
- if (boot_devices_bitmap & (1 << (*p - 'a'))) {
- fprintf(stderr,
- "Boot device '%c' was given twice\n",*p);
- exit(1);
+ if (get_param_value(buf, sizeof(buf),
+ "menu", optarg)) {
+ if (!strcmp(buf, "on")) {
+ boot_menu = 1;
+ } else if (!strcmp(buf, "off")) {
+ boot_menu = 0;
+ } else {
+ fprintf(stderr,
+ "qemu: invalid option value '%s'\n",
+ buf);
+ exit(1);
+ }
}
- boot_devices_bitmap |= 1 << (*p - 'a');
}
}
break;
break;
#ifdef CONFIG_SLIRP
case QEMU_OPTION_tftp:
- tftp_prefix = optarg;
+ legacy_tftp_prefix = optarg;
break;
case QEMU_OPTION_bootp:
- bootp_filename = optarg;
+ legacy_bootp_filename = optarg;
break;
#ifndef _WIN32
case QEMU_OPTION_smb:
- net_slirp_smb(optarg);
+ net_slirp_smb(optarg);
break;
#endif
case QEMU_OPTION_redir:
- net_slirp_redir(NULL, optarg, NULL);
+ net_slirp_redir(optarg);
break;
#endif
case QEMU_OPTION_bt:
break;
#endif
#ifdef CONFIG_KQEMU
- case QEMU_OPTION_no_kqemu:
- kqemu_allowed = 0;
+ case QEMU_OPTION_enable_kqemu:
+ kqemu_allowed = 1;
break;
case QEMU_OPTION_kernel_kqemu:
kqemu_allowed = 2;
case QEMU_OPTION_no_hpet:
no_hpet = 1;
break;
- case QEMU_OPTION_no_virtio_balloon:
- no_virtio_balloon = 1;
+ case QEMU_OPTION_balloon:
+ if (balloon_parse(optarg) < 0) {
+ fprintf(stderr, "Unknown -balloon argument %s\n", optarg);
+ exit(1);
+ }
break;
#endif
case QEMU_OPTION_no_reboot:
break;
#endif
case QEMU_OPTION_name:
- qemu_name = optarg;
+ qemu_name = qemu_strdup(optarg);
+ {
+ char *p = strchr(qemu_name, ',');
+ if (p != NULL) {
+ *p++ = 0;
+ if (strncmp(p, "process=", 8)) {
+ fprintf(stderr, "Unknown subargument %s to -name", p);
+ exit(1);
+ }
+ p += 8;
+ set_proc_name(p);
+ }
+ }
break;
#if defined(TARGET_SPARC) || defined(TARGET_PPC)
case QEMU_OPTION_prom_env:
exit(1);
}
- /* boot to floppy or the default cd if no hard disk defined yet */
- if (!boot_devices[0]) {
- boot_devices = "cad";
- }
setvbuf(stdout, NULL, _IOLBF, 0);
init_timers();
module_call_init(MODULE_INIT_DEVICE);
+ if (machine->compat_props) {
+ qdev_prop_register_compat(machine->compat_props);
+ }
machine->init(ram_size, boot_devices,
kernel_filename, kernel_cmdline, initrd_filename, cpu_model);
current_machine = machine;
- /* Set KVM's vcpu state to qemu's initial CPUState. */
- if (kvm_enabled()) {
- int ret;
-
- ret = kvm_sync_vcpus();
- if (ret < 0) {
- fprintf(stderr, "failed to initialize vcpus\n");
- exit(1);
- }
- }
-
/* init USB devices */
if (usb_enabled) {
for(i = 0; i < usb_devices_index; i++) {
do_loadvm(cur_mon, loadvm);
if (incoming) {
- autostart = 0; /* fixme how to deal with -daemonize */
+ autostart = 0;
qemu_start_incoming_migration(incoming);
}
- if (autostart)
+ else if (autostart)
vm_start();
#ifndef _WIN32