-/*++\r
-\r
-Copyright (c) 2006, Intel Corporation \r
-All rights reserved. This program and the accompanying materials \r
-are licensed and made available under the terms and conditions of the BSD License \r
-which accompanies this distribution. The full text of the license may be found at \r
-http://opensource.org/licenses/bsd-license.php \r
- \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
-\r
-Module Name:\r
-\r
- DxeLoad.c\r
-\r
-Abstract:\r
-\r
- Last PEIM.\r
- Responsibility of this module is to load the DXE Core from a Firmware Volume.\r
-\r
---*/\r
-\r
-#include <DxeIpl.h>\r
-\r
-#ifndef __GNUC__\r
-#pragma warning( disable : 4305 )\r
-#endif\r
-\r
-BOOLEAN gInMemory = FALSE;\r
-\r
-//\r
-// Module Globals used in the DXE to PEI handoff\r
-// These must be module globals, so the stack can be switched\r
-//\r
-static EFI_DXE_IPL_PPI mDxeIplPpi = {\r
- DxeLoadCore\r
-};\r
-\r
-static EFI_PEI_FV_FILE_LOADER_PPI mLoadFilePpi = {\r
- DxeIplLoadFile\r
-};\r
-\r
-static EFI_PEI_PPI_DESCRIPTOR mPpiLoadFile = {\r
- (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
- &gEfiPeiFvFileLoaderPpiGuid,\r
- &mLoadFilePpi\r
-};\r
-\r
-static EFI_PEI_PPI_DESCRIPTOR mPpiList = {\r
- (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
- &gEfiDxeIplPpiGuid,\r
- &mDxeIplPpi\r
-};\r
-\r
-static EFI_PEI_PPI_DESCRIPTOR mPpiSignal = {\r
- (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
- &gEfiEndOfPeiSignalPpiGuid,\r
- NULL\r
-};\r
-\r
-GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gEfiDecompress = {\r
- UefiDecompressGetInfo,\r
- UefiDecompress\r
-};\r
-\r
-GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gTianoDecompress = {\r
- TianoDecompressGetInfo,\r
- TianoDecompress\r
-};\r
-\r
-GLOBAL_REMOVE_IF_UNREFERENCED DECOMPRESS_LIBRARY gCustomDecompress = {\r
- CustomDecompressGetInfo,\r
- CustomDecompress\r
-};\r
-\r
-STATIC\r
-UINTN\r
-GetOccupiedSize (\r
- IN UINTN ActualSize,\r
- IN UINTN Alignment\r
- )\r
-{\r
- UINTN OccupiedSize;\r
-\r
- OccupiedSize = ActualSize;\r
- while ((OccupiedSize & (Alignment - 1)) != 0) {\r
- OccupiedSize++;\r
- }\r
-\r
- return OccupiedSize;\r
-}\r
-\r
-EFI_STATUS\r
-EFIAPI\r
-PeimInitializeDxeIpl (\r
- IN EFI_FFS_FILE_HEADER *FfsHeader,\r
- IN EFI_PEI_SERVICES **PeiServices\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Initializes the Dxe Ipl PPI\r
-\r
-Arguments:\r
-\r
- FfsHeader - Pointer to FFS file header\r
- PeiServices - General purpose services available to every PEIM.\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS\r
-\r
---*/\r
-{\r
- EFI_STATUS Status;\r
- EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r
- EFI_BOOT_MODE BootMode;\r
-\r
- Status = PeiServicesGetBootMode (&BootMode);\r
-\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- if (!gInMemory && (BootMode != BOOT_ON_S3_RESUME)) { \r
- //\r
- // The DxeIpl has not yet been shadowed\r
- //\r
- PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r
-\r
- //\r
- // Shadow DxeIpl and then re-run its entry point\r
- //\r
- Status = ShadowDxeIpl (FfsHeader, PeiEfiPeiPeCoffLoader);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- } else {\r
- if (BootMode != BOOT_ON_S3_RESUME) {\r
-\r
- //\r
- // Install LoadFile PPI\r
- //\r
- Status = PeiServicesInstallPpi (&mPpiLoadFile);\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- }\r
- //\r
- // Install DxeIpl PPI\r
- //\r
- Status = PeiServicesInstallPpi (&mPpiList);\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-EFI_STATUS\r
-EFIAPI\r
-DxeLoadCore (\r
- IN EFI_DXE_IPL_PPI *This,\r
- IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_HOB_POINTERS HobList\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Main entry point to last PEIM\r
-\r
-Arguments:\r
-\r
- This - Entry point for DXE IPL PPI\r
- PeiServices - General purpose services available to every PEIM.\r
- HobList - Address to the Pei HOB list\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - DEX core was successfully loaded.\r
- EFI_OUT_OF_RESOURCES - There are not enough resources to load DXE core.\r
-\r
---*/\r
-{\r
- EFI_STATUS Status;\r
- EFI_PHYSICAL_ADDRESS TopOfStack;\r
- EFI_PHYSICAL_ADDRESS BaseOfStack;\r
- EFI_PHYSICAL_ADDRESS BspStore;\r
- EFI_GUID DxeCoreFileName;\r
- EFI_GUID FirmwareFileName;\r
- VOID *DxeCorePe32Data;\r
- VOID *FvImageData; \r
- EFI_PHYSICAL_ADDRESS DxeCoreAddress;\r
- UINT64 DxeCoreSize;\r
- EFI_PHYSICAL_ADDRESS DxeCoreEntryPoint;\r
- EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r
- EFI_BOOT_MODE BootMode;\r
- EFI_PEI_RECOVERY_MODULE_PPI *PeiRecovery;\r
- EFI_PEI_S3_RESUME_PPI *S3Resume;\r
- EFI_PHYSICAL_ADDRESS PageTables;\r
- \r
- TopOfStack = 0;\r
- BaseOfStack = 0;\r
- BspStore = 0;\r
- Status = EFI_SUCCESS;\r
-\r
- //\r
- // if in S3 Resume, restore configure\r
- //\r
- Status = PeiServicesGetBootMode (&BootMode);\r
-\r
- if (!EFI_ERROR (Status) && (BootMode == BOOT_ON_S3_RESUME)) {\r
- Status = PeiServicesLocatePpi (\r
- &gEfiPeiS3ResumePpiGuid,\r
- 0,\r
- NULL,\r
- (VOID **)&S3Resume\r
- );\r
-\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- Status = S3Resume->S3RestoreConfig (PeiServices);\r
-\r
- ASSERT_EFI_ERROR (Status);\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- //\r
- // Install the PEI Protocols that are shared between PEI and DXE\r
- //\r
- PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r
- ASSERT (PeiEfiPeiPeCoffLoader != NULL);\r
-\r
- //\r
- // Allocate 128KB for the Stack\r
- //\r
- PeiServicesAllocatePages (EfiBootServicesData, EFI_SIZE_TO_PAGES (STACK_SIZE), &BaseOfStack);\r
- ASSERT (BaseOfStack != 0);\r
-\r
- //\r
- // Compute the top of the stack we were allocated, which is used to load X64 dxe core. \r
- // Pre-allocate a 32 bytes which confroms to x64 calling convention.\r
- //\r
- // The first four parameters to a function are passed in rcx, rdx, r8 and r9. \r
- // Any further parameters are pushed on the stack. Furthermore, space (4 * 8bytes) for the \r
- // register parameters is reserved on the stack, in case the called function \r
- // wants to spill them; this is important if the function is variadic. \r
- //\r
- TopOfStack = BaseOfStack + EFI_SIZE_TO_PAGES (STACK_SIZE) * EFI_PAGE_SIZE - 32;\r
-\r
- //\r
- // X64 Calling Conventions requires that the stack must be aligned to 16 bytes\r
- //\r
- TopOfStack = (EFI_PHYSICAL_ADDRESS) (UINTN) ALIGN_POINTER (TopOfStack, 16);\r
-\r
- //\r
- // Add architecture-specifc HOBs (including the BspStore HOB)\r
- //\r
- Status = CreateArchSpecificHobs (&BspStore);\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- //\r
- // See if we are in crisis recovery\r
- //\r
- Status = PeiServicesGetBootMode (&BootMode);\r
- if (!EFI_ERROR (Status) && (BootMode == BOOT_IN_RECOVERY_MODE)) {\r
- Status = PeiServicesLocatePpi (\r
- &gEfiPeiRecoveryModulePpiGuid,\r
- 0,\r
- NULL,\r
- (VOID **)&PeiRecovery\r
- );\r
-\r
- ASSERT_EFI_ERROR (Status);\r
- Status = PeiRecovery->LoadRecoveryCapsule (PeiServices, PeiRecovery);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "Load Recovery Capsule Failed.(Status = %r)\n", Status));\r
- CpuDeadLoop ();\r
- }\r
- }\r
-\r
- //\r
- // Find the EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE type compressed Firmware Volume file\r
- // The file found will be processed by PeiProcessFile: It will first be decompressed to\r
- // a normal FV, then a corresponding FV type hob will be built. \r
- //\r
- Status = PeiFindFile (\r
- EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE,\r
- EFI_SECTION_FIRMWARE_VOLUME_IMAGE,\r
- &FirmwareFileName,\r
- &FvImageData\r
- );\r
-\r
- //\r
- // Find the DXE Core in a Firmware Volume\r
- //\r
- Status = PeiFindFile (\r
- EFI_FV_FILETYPE_DXE_CORE,\r
- EFI_SECTION_PE32,\r
- &DxeCoreFileName,\r
- &DxeCorePe32Data\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- //\r
- // Load the GDT of Go64. Since the GDT of 32-bit Tiano locates in the BS_DATA\r
- // memory, it may be corrupted when copying FV to high-end memory \r
- //\r
- LoadGo64Gdt();\r
-\r
- //\r
- // Limit to 36 bits of addressing for debug. Should get it from CPU\r
- //\r
- PageTables = CreateIdentityMappingPageTables (36);\r
-\r
-\r
- //\r
- // Load the DXE Core from a Firmware Volume\r
- //\r
- Status = PeiLoadPeImage (\r
- PeiEfiPeiPeCoffLoader,\r
- DxeCorePe32Data,\r
- EfiBootServicesData,\r
- &DxeCoreAddress,\r
- &DxeCoreSize,\r
- &DxeCoreEntryPoint\r
- );\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- //\r
- // Transfer control to the DXE Core\r
- // The handoff state is simply a pointer to the HOB list\r
- //\r
-\r
- Status = PeiServicesInstallPpi (&mPpiSignal);\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- //\r
- //\r
- // Add HOB for the DXE Core\r
- //\r
- BuildModuleHob (\r
- &DxeCoreFileName,\r
- DxeCoreAddress,\r
- DxeCoreSize,\r
- DxeCoreEntryPoint\r
- );\r
-\r
- //\r
- // Report Status Code EFI_SW_PEI_PC_HANDOFF_TO_NEXT\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- EFI_SOFTWARE_PEI_MODULE | EFI_SW_PEI_CORE_PC_HANDOFF_TO_NEXT\r
- );\r
-\r
- DEBUG ((EFI_D_INFO, "DXE Core Entry\n"));\r
- //\r
- // Go to Long Mode. Interrupts will not get turned on until the CPU AP is loaded.\r
- // Call x64 drivers passing in single argument, a pointer to the HOBs.\r
- //\r
- ActivateLongMode (\r
- PageTables, \r
- (EFI_PHYSICAL_ADDRESS)(UINTN)(HobList.Raw), \r
- TopOfStack,\r
- 0x00000000,\r
- DxeCoreEntryPoint\r
- );\r
-\r
- //\r
- // If we get here, then the DXE Core returned. This is an error\r
- // Dxe Core should not return.\r
- //\r
- ASSERT (FALSE);\r
- CpuDeadLoop ();\r
-\r
- return EFI_OUT_OF_RESOURCES;\r
-}\r
-\r
-EFI_STATUS\r
-PeiFindFile (\r
- IN UINT8 Type,\r
- IN UINT16 SectionType,\r
- OUT EFI_GUID *FileName,\r
- OUT VOID **Pe32Data\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Finds a PE/COFF of a specific Type and SectionType in the Firmware Volumes\r
- described in the HOB list. Able to search in a compression set in a FFS file.\r
- But only one level of compression is supported, that is, not able to search\r
- in a compression set that is within another compression set.\r
-\r
-Arguments:\r
-\r
- Type - The Type of file to retrieve\r
-\r
- SectionType - The type of section to retrieve from a file\r
-\r
- FileName - The name of the file found in the Firmware Volume\r
-\r
- Pe32Data - Pointer to the beginning of the PE/COFF file found in the Firmware Volume\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - The file was found, and the name is returned in FileName, and a pointer to\r
- the PE/COFF image is returned in Pe32Data\r
-\r
- EFI_NOT_FOUND - The file was not found in the Firmware Volumes present in the HOB List\r
-\r
---*/\r
-{\r
- EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;\r
- EFI_FFS_FILE_HEADER *FfsFileHeader;\r
- VOID *SectionData;\r
- EFI_STATUS Status;\r
- EFI_PEI_HOB_POINTERS Hob;\r
-\r
-\r
- FwVolHeader = NULL;\r
- FfsFileHeader = NULL;\r
- SectionData = NULL;\r
- Status = EFI_SUCCESS;\r
-\r
- //\r
- // For each Firmware Volume, look for a specified type\r
- // of file and break out until no one is found \r
- //\r
- Hob.Raw = GetHobList ();\r
- while ((Hob.Raw = GetNextHob (EFI_HOB_TYPE_FV, Hob.Raw)) != NULL) {\r
- FwVolHeader = (EFI_FIRMWARE_VOLUME_HEADER *) (UINTN) (Hob.FirmwareVolume->BaseAddress);\r
- Status = PeiServicesFfsFindNextFile (\r
- Type,\r
- FwVolHeader,\r
- &FfsFileHeader\r
- );\r
- if (!EFI_ERROR (Status)) {\r
- Status = PeiProcessFile (\r
- SectionType,\r
- FfsFileHeader,\r
- Pe32Data,\r
- &Hob\r
- );\r
- CopyMem (FileName, &FfsFileHeader->Name, sizeof (EFI_GUID));\r
- if (!EFI_ERROR (Status)) {\r
- return EFI_SUCCESS;\r
- }\r
- }\r
- Hob.Raw = GET_NEXT_HOB (Hob);\r
- }\r
- return EFI_NOT_FOUND;\r
-}\r
-\r
-EFI_STATUS\r
-PeiLoadPeImage (\r
- IN EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader,\r
- IN VOID *Pe32Data,\r
- IN EFI_MEMORY_TYPE MemoryType,\r
- OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r
- OUT UINT64 *ImageSize,\r
- OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Loads and relocates a PE/COFF image into memory.\r
-\r
-Arguments:\r
-\r
- PeiEfiPeiPeCoffLoader - Pointer to a PE COFF loader protocol\r
-\r
- Pe32Data - The base address of the PE/COFF file that is to be loaded and relocated\r
-\r
- ImageAddress - The base address of the relocated PE/COFF image\r
-\r
- ImageSize - The size of the relocated PE/COFF image\r
-\r
- EntryPoint - The entry point of the relocated PE/COFF image\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - The file was loaded and relocated\r
- EFI_OUT_OF_RESOURCES - There was not enough memory to load and relocate the PE/COFF file\r
-\r
---*/\r
-{\r
- EFI_STATUS Status;\r
- PE_COFF_LOADER_IMAGE_CONTEXT ImageContext;\r
- EFI_PHYSICAL_ADDRESS MemoryBuffer;\r
-\r
- ZeroMem (&ImageContext, sizeof (ImageContext));\r
- ImageContext.Handle = Pe32Data;\r
- Status = GetImageReadFunction (&ImageContext);\r
-\r
- ASSERT_EFI_ERROR (Status);\r
-\r
- Status = PeiEfiPeiPeCoffLoader->GetImageInfo (PeiEfiPeiPeCoffLoader, &ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // Allocate Memory for the image\r
- //\r
- //\r
- // Allocate Memory for the image\r
- //\r
- PeiServicesAllocatePages (MemoryType, EFI_SIZE_TO_PAGES ((UINT32) ImageContext.ImageSize), &MemoryBuffer);\r
- ImageContext.ImageAddress = MemoryBuffer;\r
- ASSERT (ImageContext.ImageAddress != 0);\r
-\r
- //\r
- // Load the image to our new buffer\r
- //\r
-\r
- Status = PeiEfiPeiPeCoffLoader->LoadImage (PeiEfiPeiPeCoffLoader, &ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- \r
- //\r
- // Relocate the image in our new buffer\r
- //\r
- Status = PeiEfiPeiPeCoffLoader->RelocateImage (PeiEfiPeiPeCoffLoader, &ImageContext);\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- //\r
- // Flush the instruction cache so the image data is written before we execute it\r
- //\r
- InvalidateInstructionCacheRange ((VOID *)(UINTN)ImageContext.ImageAddress, (UINTN)ImageContext.ImageSize);\r
-\r
- *ImageAddress = ImageContext.ImageAddress;\r
- *ImageSize = ImageContext.ImageSize;\r
- *EntryPoint = ImageContext.EntryPoint;\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-EFI_STATUS\r
-ShadowDxeIpl (\r
- IN EFI_FFS_FILE_HEADER *DxeIplFileHeader,\r
- IN EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Shadow the DXE IPL to a different memory location. This occurs after permanent\r
- memory has been discovered.\r
-\r
-Arguments:\r
-\r
- DxeIplFileHeader - Pointer to the FFS file header of the DXE IPL driver\r
-\r
- PeiEfiPeiPeCoffLoader - Pointer to a PE COFF loader protocol\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - DXE IPL was successfully shadowed to a different memory location.\r
-\r
- EFI_ ERROR - The shadow was unsuccessful.\r
-\r
-\r
---*/\r
-{\r
- UINTN SectionLength;\r
- UINTN OccupiedSectionLength;\r
- EFI_PHYSICAL_ADDRESS DxeIplAddress;\r
- UINT64 DxeIplSize;\r
- EFI_PHYSICAL_ADDRESS DxeIplEntryPoint;\r
- EFI_STATUS Status;\r
- EFI_COMMON_SECTION_HEADER *Section;\r
-\r
- Section = (EFI_COMMON_SECTION_HEADER *) (DxeIplFileHeader + 1);\r
-\r
- while ((Section->Type != EFI_SECTION_PE32) && (Section->Type != EFI_SECTION_TE)) {\r
- SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r
- OccupiedSectionLength = GetOccupiedSize (SectionLength, 4);\r
- Section = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) Section + OccupiedSectionLength);\r
- }\r
- \r
- //\r
- // Relocate DxeIpl into memory by using loadfile service\r
- //\r
- Status = PeiLoadPeImage (\r
- PeiEfiPeiPeCoffLoader,\r
- (VOID *) (Section + 1),\r
- EfiBootServicesData,\r
- &DxeIplAddress,\r
- &DxeIplSize,\r
- &DxeIplEntryPoint\r
- );\r
- \r
- if (Status == EFI_SUCCESS) {\r
- //\r
- // Set gInMemory global variable to TRUE to indicate the dxeipl is shadowed.\r
- //\r
- *(BOOLEAN *) ((UINTN) &gInMemory + (UINTN) DxeIplEntryPoint - (UINTN) _ModuleEntryPoint) = TRUE;\r
- Status = ((EFI_PEIM_ENTRY_POINT) (UINTN) DxeIplEntryPoint) (DxeIplFileHeader, GetPeiServicesTablePointer());\r
- }\r
-\r
- return Status;\r
-}\r
-\r
-EFI_STATUS\r
-EFIAPI\r
-DxeIplLoadFile (\r
- IN EFI_PEI_FV_FILE_LOADER_PPI *This,\r
- IN EFI_FFS_FILE_HEADER *FfsHeader,\r
- OUT EFI_PHYSICAL_ADDRESS *ImageAddress,\r
- OUT UINT64 *ImageSize,\r
- OUT EFI_PHYSICAL_ADDRESS *EntryPoint\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
- Given a pointer to an FFS file containing a PE32 image, get the\r
- information on the PE32 image, and then "load" it so that it\r
- can be executed.\r
-\r
-Arguments:\r
-\r
- This - pointer to our file loader protocol\r
- FfsHeader - pointer to the FFS file header of the FFS file that\r
- contains the PE32 image we want to load\r
- ImageAddress - returned address where the PE32 image is loaded\r
- ImageSize - returned size of the loaded PE32 image\r
- EntryPoint - entry point to the loaded PE32 image\r
-\r
-Returns:\r
- \r
- EFI_SUCCESS - The FFS file was successfully loaded.\r
- EFI_ERROR - Unable to load the FFS file.\r
-\r
---*/\r
-{\r
- EFI_PEI_PE_COFF_LOADER_PROTOCOL *PeiEfiPeiPeCoffLoader;\r
- EFI_STATUS Status;\r
- VOID *Pe32Data;\r
-\r
- Pe32Data = NULL;\r
- PeiEfiPeiPeCoffLoader = (EFI_PEI_PE_COFF_LOADER_PROTOCOL *)GetPeCoffLoaderProtocol ();\r
-\r
- //\r
- // Preprocess the FFS file to get a pointer to the PE32 information\r
- // in the enclosed PE32 image.\r
- //\r
- Status = PeiProcessFile (\r
- EFI_SECTION_PE32,\r
- FfsHeader,\r
- &Pe32Data,\r
- NULL\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // Load the PE image from the FFS file\r
- //\r
- Status = PeiLoadPeImage (\r
- PeiEfiPeiPeCoffLoader,\r
- Pe32Data,\r
- EfiBootServicesData,\r
- ImageAddress,\r
- ImageSize,\r
- EntryPoint\r
- );\r
-\r
- return Status;\r
-}\r
-\r
-EFI_STATUS\r
-PeiProcessFile (\r
- IN UINT16 SectionType,\r
- IN EFI_FFS_FILE_HEADER *FfsFileHeader,\r
- OUT VOID **Pe32Data,\r
- IN EFI_PEI_HOB_POINTERS *OrigHob\r
- )\r
-/*++\r
-\r
-Routine Description:\r
-\r
-Arguments:\r
-\r
- SectionType - The type of section in the FFS file to process.\r
-\r
- FfsFileHeader - Pointer to the FFS file to process, looking for the\r
- specified SectionType\r
-\r
- Pe32Data - returned pointer to the start of the PE32 image found\r
- in the FFS file.\r
-\r
-Returns:\r
-\r
- EFI_SUCCESS - found the PE32 section in the FFS file\r
-\r
---*/\r
-{\r
- EFI_STATUS Status;\r
- VOID *SectionData;\r
- DECOMPRESS_LIBRARY *DecompressLibrary;\r
- UINT8 *DstBuffer;\r
- UINT8 *ScratchBuffer;\r
- UINT32 DstBufferSize;\r
- UINT32 ScratchBufferSize;\r
- EFI_COMMON_SECTION_HEADER *CmpSection;\r
- UINTN CmpSectionLength;\r
- UINTN OccupiedCmpSectionLength;\r
- VOID *CmpFileData;\r
- UINTN CmpFileSize;\r
- EFI_COMMON_SECTION_HEADER *Section;\r
- UINTN SectionLength;\r
- UINTN OccupiedSectionLength;\r
- UINT64 FileSize;\r
- EFI_GUID_DEFINED_SECTION *GuidedSectionHeader;\r
- UINT32 AuthenticationStatus;\r
- EFI_PEI_SECTION_EXTRACTION_PPI *SectionExtract;\r
- UINT32 BufferSize;\r
- UINT8 *Buffer;\r
- EFI_PEI_SECURITY_PPI *Security;\r
- BOOLEAN StartCrisisRecovery;\r
- EFI_GUID TempGuid;\r
- EFI_FIRMWARE_VOLUME_HEADER *FvHeader;\r
- EFI_COMPRESSION_SECTION *CompressionSection;\r
- UINT32 FvAlignment;\r
-\r
- Status = PeiServicesFfsFindSectionData (\r
- EFI_SECTION_COMPRESSION,\r
- FfsFileHeader,\r
- &SectionData\r
- );\r
-\r
- //\r
- // First process the compression section\r
- //\r
- if (!EFI_ERROR (Status)) {\r
- //\r
- // Yes, there is a compression section, so extract the contents\r
- // Decompress the image here\r
- //\r
- Section = (EFI_COMMON_SECTION_HEADER *) (UINTN) (VOID *) ((UINT8 *) (FfsFileHeader) + (UINTN) sizeof (EFI_FFS_FILE_HEADER));\r
-\r
- do {\r
- SectionLength = *(UINT32 *) (Section->Size) & 0x00ffffff;\r
- OccupiedSectionLength = GetOccupiedSize (SectionLength, 4);\r
-\r
- //\r
- // Was the DXE Core file encapsulated in a GUID'd section?\r
- //\r
- if (Section->Type == EFI_SECTION_GUID_DEFINED) {\r
- //\r
- // Locate the GUID'd Section Extractor\r
- //\r
- GuidedSectionHeader = (VOID *) (Section + 1);\r
-\r
- //\r
- // This following code constitutes the addition of the security model\r
- // to the DXE IPL.\r
- //\r
- //\r
- // Set a default authenticatino state\r
- //\r
- AuthenticationStatus = 0;\r
-\r
- Status = PeiServicesLocatePpi (\r
- &gEfiPeiSectionExtractionPpiGuid,\r
- 0,\r
- NULL,\r
- (VOID **)&SectionExtract\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // Verify Authentication State\r
- //\r
- CopyMem (&TempGuid, Section + 1, sizeof (EFI_GUID));\r
-\r
- Status = SectionExtract->PeiGetSection (\r
- GetPeiServicesTablePointer(),\r
- SectionExtract,\r
- (EFI_SECTION_TYPE *) &SectionType,\r
- &TempGuid,\r
- 0,\r
- (VOID **) &Buffer,\r
- &BufferSize,\r
- &AuthenticationStatus\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // If not ask the Security PPI, if exists, for disposition\r
- //\r
- //\r
- Status = PeiServicesLocatePpi (\r
- &gEfiPeiSecurityPpiGuid,\r
- 0,\r
- NULL,\r
- (VOID **)&Security\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- Status = Security->AuthenticationState (\r
- GetPeiServicesTablePointer(),\r
- (struct _EFI_PEI_SECURITY_PPI *) Security,\r
- AuthenticationStatus,\r
- FfsFileHeader,\r
- &StartCrisisRecovery\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- //\r
- // If there is a security violation, report to caller and have\r
- // the upper-level logic possible engender a crisis recovery\r
- //\r
- if (StartCrisisRecovery) {\r
- return EFI_SECURITY_VIOLATION;\r
- }\r
- }\r
-\r
- if (Section->Type == EFI_SECTION_PE32) {\r
- //\r
- // This is what we want\r
- //\r
- *Pe32Data = (VOID *) (Section + 1);\r
- return EFI_SUCCESS;\r
- } else if (Section->Type == EFI_SECTION_COMPRESSION) {\r
- //\r
- // This is a compression set, expand it\r
- //\r
- CompressionSection = (EFI_COMPRESSION_SECTION *) Section;\r
-\r
- switch (CompressionSection->CompressionType) {\r
- case EFI_STANDARD_COMPRESSION:\r
- if (FeaturePcdGet (PcdDxeIplSupportTianoDecompress)) {\r
- DecompressLibrary = &gTianoDecompress;\r
- } else {\r
- ASSERT (FALSE);\r
- return EFI_NOT_FOUND;\r
- }\r
- break;\r
-\r
- case EFI_CUSTOMIZED_COMPRESSION:\r
- //\r
- // Load user customized compression protocol.\r
- //\r
- if (FeaturePcdGet (PcdDxeIplSupportCustomDecompress)) {\r
- DecompressLibrary = &gCustomDecompress;\r
- } else {\r
- ASSERT (FALSE);\r
- return EFI_NOT_FOUND;\r
- }\r
- break;\r
-\r
- case EFI_NOT_COMPRESSED:\r
- default:\r
- //\r
- // Need to support not compressed file\r
- //\r
- ASSERT_EFI_ERROR (Status);\r
- return EFI_NOT_FOUND;\r
- }\r
-\r
- Status = DecompressLibrary->GetInfo (\r
- (UINT8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
- (UINT32) SectionLength - sizeof (EFI_COMPRESSION_SECTION),\r
- &DstBufferSize,\r
- &ScratchBufferSize\r
- );\r
- if (EFI_ERROR (Status)) {\r
- //\r
- // GetInfo failed\r
- //\r
- return EFI_NOT_FOUND;\r
- }\r
-\r
- //\r
- // Allocate scratch buffer\r
- //\r
- ScratchBuffer = AllocatePages (EFI_SIZE_TO_PAGES (ScratchBufferSize));\r
- if (ScratchBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
-\r
- //\r
- // Allocate destination buffer\r
- //\r
- DstBuffer = AllocatePages (EFI_SIZE_TO_PAGES (DstBufferSize));\r
- if (DstBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
-\r
- //\r
- // Call decompress function\r
- //\r
- Status = DecompressLibrary->Decompress (\r
- (CHAR8 *) ((EFI_COMPRESSION_SECTION *) Section + 1),\r
- DstBuffer,\r
- ScratchBuffer\r
- );\r
-\r
- CmpSection = (EFI_COMMON_SECTION_HEADER *) DstBuffer;\r
- if (CmpSection->Type == EFI_SECTION_FIRMWARE_VOLUME_IMAGE) {\r
- // \r
- // Firmware Volume Image in this Section\r
- // Skip the section header to get FvHeader\r
- //\r
- FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) (CmpSection + 1);\r
-\r
- if (FvHeader->Signature == EFI_FVH_SIGNATURE) { \r
- //\r
- // Adjust Fv Base Address Alignment based on Align Attributes in Fv Header\r
- //\r
- \r
- //\r
- // When FvImage support Alignment, we need to check whether \r
- // its alignment is correct. \r
- //\r
- if (FvHeader->Attributes | EFI_FVB_ALIGNMENT_CAP) {\r
- \r
- //\r
- // Calculate the mini alignment for this FvImage\r
- //\r
- FvAlignment = 1 << (LowBitSet32 (FvHeader->Attributes >> 16) + 1);\r
- \r
- //\r
- // If current FvImage base address doesn't meet the its alignment,\r
- // we need to reload this FvImage to another correct memory address.\r
- //\r
- if (((UINTN) FvHeader % FvAlignment) != 0) {\r
- DstBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES ((UINTN) FvHeader->FvLength), FvAlignment);\r
- if (DstBuffer == NULL) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- CopyMem (DstBuffer, FvHeader, (UINTN) FvHeader->FvLength);\r
- FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) DstBuffer; \r
- }\r
- }\r
- //\r
- // Build new FvHob for new decompressed Fv image.\r
- //\r
- BuildFvHob ((EFI_PHYSICAL_ADDRESS) (UINTN) FvHeader, FvHeader->FvLength);\r
- \r
- //\r
- // Set the original FvHob to unused.\r
- //\r
- if (OrigHob != NULL) {\r
- OrigHob->Header->HobType = EFI_HOB_TYPE_UNUSED;\r
- }\r
- \r
- //\r
- // when search FvImage Section return true.\r
- //\r
- if (SectionType == EFI_SECTION_FIRMWARE_VOLUME_IMAGE) {\r
- *Pe32Data = (VOID *) FvHeader;\r
- return EFI_SUCCESS;\r
- } else {\r
- return EFI_NOT_FOUND;\r
- }\r
-\r
- }\r
- }\r
- //\r
- // Decompress successfully.\r
- // Loop the decompressed data searching for expected section.\r
- //\r
- CmpFileData = (VOID *) DstBuffer;\r
- CmpFileSize = DstBufferSize;\r
- do {\r
- CmpSectionLength = *(UINT32 *) (CmpSection->Size) & 0x00ffffff;\r
- if (CmpSection->Type == EFI_SECTION_PE32) {\r
- //\r
- // This is what we want\r
- //\r
- *Pe32Data = (VOID *) (CmpSection + 1);\r
- return EFI_SUCCESS;\r
- }\r
-\r
- OccupiedCmpSectionLength = GetOccupiedSize (CmpSectionLength, 4);\r
- CmpSection = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) CmpSection + OccupiedCmpSectionLength);\r
- } while (CmpSection->Type != 0 && (UINTN) ((UINT8 *) CmpSection - (UINT8 *) CmpFileData) < CmpFileSize);\r
- }\r
- //\r
- // End of the decompression activity\r
- //\r
-\r
- Section = (EFI_COMMON_SECTION_HEADER *) ((UINT8 *) Section + OccupiedSectionLength);\r
- FileSize = FfsFileHeader->Size[0] & 0xFF;\r
- FileSize += (FfsFileHeader->Size[1] << 8) & 0xFF00;\r
- FileSize += (FfsFileHeader->Size[2] << 16) & 0xFF0000;\r
- FileSize &= 0x00FFFFFF;\r
- } while (Section->Type != 0 && (UINTN) ((UINT8 *) Section - (UINT8 *) FfsFileHeader) < FileSize);\r
- \r
- //\r
- // search all sections (compression and non compression) in this FFS, don't \r
- // find expected section.\r
- //\r
- return EFI_NOT_FOUND;\r
- } else {\r
- //\r
- // For those FFS that doesn't contain compression section, directly search \r
- // PE or TE section in this FFS.\r
- //\r
-\r
- Status = PeiServicesFfsFindSectionData (\r
- EFI_SECTION_PE32,\r
- FfsFileHeader,\r
- &SectionData\r
- );\r
-\r
- if (EFI_ERROR (Status)) {\r
- Status = PeiServicesFfsFindSectionData (\r
- EFI_SECTION_TE,\r
- FfsFileHeader,\r
- &SectionData\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
- }\r
- }\r
-\r
- *Pe32Data = SectionData;\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r