update max_variance limit in zdb_block_size_histogram test for CI
Commit 2d7843401a628ef8c483229742dd58bca70bc27e had previously
updated this hardcoded limit to allow for CI testing. As there
is no deterministic pass/fail value, the need has arisen for
one more small increase.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Edmund Nadolski <edmund.nadolski@ixsystems.com>
Closes #15252
Alexander Motin [Sat, 9 Sep 2023 17:22:36 +0000 (13:22 -0400)]
Add more constraints for block cloning.
- We cannot clone into files with smaller block size if there is
more than one block, since we can not grow the block size.
- Block size must be power-of-2 if destination offset != 0, since
there can be no multiple blocks of non-power-of-2 size.
The first should handle the case when destination file has several
blocks but still is not bigger than one block of the source file.
The second fixes panic in dmu_buf_hold_array_by_dnode() on attempt
to concatenate files with equal but non-power-of-2 block sizes.
While there, assert that error is reported if we made no progress.
Reviewed-by: Pawel Jakub Dawidek <pawel@dawidek.net> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Reviewed-by: Kay Pedersen <mail@mkwg.de> Reviewed-by: Umer Saleem <usaleem@ixsystems.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15251
Fix by cleaning up all the sub-entries inside "kernel/spl" when the
spl module is unloaded.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15239
ZFS historically has had several space allocators that were
dynamically selectable. While these have been retained in
OpenZFS, only a single allocator has been statically compiled
in. This patch compiles all allocators for OpenZFS and provides
a module parameter to allow for manual selection between them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Edmund Nadolski <edmund.nadolski@ixsystems.com>
Closes #15218
Relax error reporting in zpool import and zpool split
For zpool import and zpool split, zpool_enable_datasets is called
to mount and share all datasets in a pool. If there is an error
while mounting or sharing any dataset in the pool, the status of
import or split is reported as failure. However, the changes do
show up in zpool list.
This commit updates the error reporting in zpool import and zpool
split path. More descriptive messages are shown to user in case
there is an error during mount or share. Errors in mount or share
do not effect the overall status of zpool import and zpool split.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15216
Andrea Righi [Sat, 2 Sep 2023 00:21:40 +0000 (02:21 +0200)]
Linux 6.5 compat: safe cleanup in spl_proc_fini()
If we fail to create a proc entry in spl_proc_init() we may end up
calling unregister_sysctl_table() twice: one in the failure path of
spl_proc_init() and another time during spl_proc_fini().
Avoid the double call to unregister_sysctl_table() and while at it
refactor the code a bit to reduce code duplication.
This was accidentally introduced when the spl code was
updated for Linux 6.5 compatibility.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Closes #15234
Closes #15235
Alexander Motin [Sat, 2 Sep 2023 00:14:50 +0000 (20:14 -0400)]
ZIL: Change ZIOs issue order.
In zil_lwb_write_issue(), after issuing lwb_root_zio/lwb_write_zio,
we have no right to access lwb->lwb_child_zio. If it was not there,
the first two ZIOs may have already completed and freed the lwb.
ZIOs issue in opposite order from children to parent should keep
the lwb valid till the end, since the lwb can be freed only after
lwb_root_zio completion callback.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15233
Alexander Motin [Sat, 2 Sep 2023 00:13:52 +0000 (20:13 -0400)]
ZIL: Revert zl_lock scope reduction.
While I have no reports of it, I suspect possible use-after-free
scenario when zil_commit_waiter() tries to dereference zcw_lwb
for lwb already freed by zil_sync(), while zcw_done is not set.
Extension of zl_lock scope as it was originally should block
zil_sync() from freeing the lwb, closing this race.
This reverts #14959 and couple chunks of #14841.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15228
dmu_buf_will_clone: change assertion to fix 32-bit compiler warning
Building module/zfs/dbuf.c for 32-bit targets can result in a warning:
In file included from
/usr/src/sys/contrib/openzfs/include/sys/zfs_context.h:97,
from /usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:32:
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c: In function
'dmu_buf_will_clone':
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:116:33: error:
cast from pointer to integer of different size
[-Werror=pointer-to-int-cast]
116 | const uint64_t __left = (uint64_t)(LEFT);
\
| ^
/usr/src/sys/contrib/openzfs/lib/libspl/include/assert.h:148:25: note:
in expansion of macro 'VERIFY0'
148 | #define ASSERT0 VERIFY0
| ^~~~~~~
/usr/src/sys/contrib/openzfs/module/zfs/dbuf.c:2704:9: note: in
expansion of macro 'ASSERT0'
2704 | ASSERT0(dbuf_find_dirty_eq(db, tx->tx_txg));
| ^~~~~~~
This is because dbuf_find_dirty_eq() returns a pointer, which if
pointers are 32-bit results in a warning about the cast to uint64_t.
Instead, use the ASSERT3P() macro, with == and NULL as second and third
arguments, which should work regardless of the target's bitness.
Reviewed-by: Kay Pedersen <mail@mkwg.de> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Dimitry Andric <dimitry@andric.com>
Closes #15224
Paul Dagnelie [Sat, 26 Aug 2023 18:34:43 +0000 (11:34 -0700)]
Increase limit of redaction list by using spill block
Currently redaction bookmarks and their associated redaction lists
have a relatively low limit of 36 redaction snapshots. This is imposed
by the number of snapshot GUIDs that fit in the bonus buffer of the
redaction list object. While this is more than enough for most use
cases, there are some limited cases where larger numbers would be
useful to support.
We tweak the redaction list creation code to use a spill block if
the number of redaction snapshots is above the amount that would fit
in the bonus buffer. We also make a small change to allow spill blocks
to be use for types of data besides SA. In order to fully leverage
this logic, we also change the redaction code to use vmem_alloc, to
handle extremely large allocations if needed. Finally, small tweaks
were made to the zfs commands and the test suite.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #15018
Rich Ercolani [Sat, 26 Aug 2023 18:25:46 +0000 (14:25 -0400)]
Avoid save/restoring AMX registers to avoid a SPR erratum
Intel SPR erratum SPR4 says that if you trip into a vmexit while
doing FPU save/restore, your AMX register state might misbehave...
and by misbehave, I mean save all zeroes incorrectly, leading to
explosions if you restore it.
Since we're not using AMX for anything, the simple way to avoid
this is to just not save/restore those when we do anything, since
we're killing preemption of any sort across our save/restores.
If we ever decide to use AMX, it's not clear that we have any
way to mitigate this, on Linux...but I am not an expert.
Rob N [Fri, 25 Aug 2023 17:31:29 +0000 (03:31 +1000)]
tests/block_cloning: rename and document get_same_blocks helper
`get_same_blocks` is a helper to compare two files and return a list of
the blocks that are clones of each other. Its very necessary for block
cloning tests.
Previously it was incorrectly called `unique_blocks`, which is the
_inverse_ of what it does (an early version did list unique blocks; it
was changed but the name was not). So if nothing else, it should be
called `duplicate_blocks`.
But, keeping the details of a clone operation in your head is actually
quite difficult, without the additional overhead of wondering how the
tools work. So I've renamed it to better describe what it does, added a
usage note, and changed it to return block indexes from 0 instead of 1,
to match how L0 blocks are normally counted.
Reviewed-by: Umer Saleem <usaleem@ixsystems.com> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15181
As part of some internal gang block testing within Delphix
we hit the assertion removed by this patch. The assertion
was triggered by a ZIO that had two copies and was a gang
block making the following expression equal to 3:
```
MIN(zp->zp_copies + BP_IS_GANG(bp), spa_max_replication(spa))
```
and failing when we expected the above to be equal to
`BP_GET_NDVAS(bp)`.
The assertion is no longer valid since the following commit:
```
commit 14872aaa4f909d72c6b5e4105dadcfa13c7d9d66
Author: Matthew Ahrens <matthew.ahrens@delphix.com>
Date: Mon Feb 6 09:37:06 2023 -0800
EIO caused by encryption + recursive gang
```
The above commit changed gang block headers so they can't
have more than 2 copies but the assertion in question from
this PR was never updated.
Reviewed-by: George Wilson <george.wilson@delphix.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #15180
Alexander Motin [Fri, 25 Aug 2023 00:08:49 +0000 (20:08 -0400)]
ZIL: Second attempt to reduce scope of zl_issuer_lock.
The previous patch #14841 appeared to have significant flaw, causing
deadlocks if zl_get_data callback got blocked waiting for TXG sync. I
already handled some of such cases in the original patch, but issue
#14982 shown cases that were impossible to solve in that design.
This patch fixes the problem by postponing log blocks allocation till
the very end, just before the zios issue, leaving nothing blocking after
that point to cause deadlocks. Before that point though any sleeps are
now allowed, not causing sync thread blockage. This require slightly
more complicated lwb state machine to allocate blocks and issue zios
in proper order. But with removal of special early issue workarounds
the new code is much cleaner now, and should even be more efficient.
Since this patch uses null zios between write, I've found that null
zios do not wait for logical children ready status in zio_ready(),
that makes parent write to proceed prematurely, producing incorrect
log blocks. Added ZIO_CHILD_LOGICAL_BIT to zio_wait_for_children()
fixes it.
Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15122
Tony Hutter [Thu, 24 Aug 2023 18:59:03 +0000 (11:59 -0700)]
zed: Add zedlet to power off slot when drive is faulted
If ZED_POWER_OFF_ENCLOUSRE_SLOT_ON_FAULT is enabled in zed.rc, then
power off the drive's slot in the enclosure if it becomes FAULTED.
This can help silence misbehaving drives. This assumes your drive
enclosure fully supports slot power control via sysfs.
Reviewed-by: @AllKind Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15200
Rob N [Tue, 15 Aug 2023 00:34:14 +0000 (10:34 +1000)]
copy_file_range: fix fallback when source create on same txg
In 019dea0a5 we removed the conversion from EAGAIN->EXDEV inside
zfs_clone_range(), but forgot to add a test for EAGAIN to the
copy_file_range() entry points to trigger fallback to a content copy.
This commit fixes that.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15170
Closes #15172
Alexander Motin [Fri, 11 Aug 2023 16:04:44 +0000 (12:04 -0400)]
ZIL: Replay blocks without next block pointer.
If we get next block allocation error during log write, we trigger
transaction commit. But the block we have just completed is still
written and transactions it covers will be acknowledged normally.
If after that we ignore the block during replay just because it is
the last in the chain, we may not replay some transactions that we
have acknowledged as synced, that is not right.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15132
Alexander Motin [Fri, 11 Aug 2023 16:04:08 +0000 (12:04 -0400)]
ZIL: Avoid dbuf_read() before dmu_sync().
In most cases dmu_sync() works with dirty records directly and does
not need actual data. The only exception is dmu_sync_late_arrival().
To save some CPU time use dmu_buf_hold_noread*() in z*_get_data()
and explicitly call dbuf_read() in dmu_sync_late_arrival(). There
is also a chance that by that time TXG will already be synced and
we won't have to do it at all.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15153
Coleman Kane [Tue, 8 Aug 2023 22:42:32 +0000 (18:42 -0400)]
Linux 6.5 compat: Use copy_splice_read instead of filemap_splice_read
Using the filemap_splice_read function for the splice_read handler was
leading to occasional data corruption under certain circumstances. Favor
using copy_splice_read instead, which does not demonstrate the same
erroneous behavior under the tested failure cases.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15164
Umer Saleem [Tue, 8 Aug 2023 16:40:36 +0000 (21:40 +0500)]
Move zinject from openzfs-zfs-test to openzfs-zfsutils
For Native Debian packaging, zinject binary and man page is
packaged in ZFS test package. zinject is not not directly related
to ZTS and should be packaged with other utilities, like it is
present in zfs_<ver>.rpm/deb packages.
This commit moves zinject binary and man page from openzfs-zfs-test
to openzfs-zfsutils package.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #15160
oromenahar [Tue, 8 Aug 2023 16:37:06 +0000 (18:37 +0200)]
zfs_clone_range should return a descriptive error codes
Return the more descriptive error codes instead of `EXDEV` when
the parameters don't match the requirements of the clone function.
Updated the comments in `brt.c` accordingly.
The first three errors are just invalid parameters, which zfs can
not handle.
The fourth error indicates that the block which should be cloned
is created and cloned or modified in the same transaction
group (`txg`).
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes #15148
Coleman Kane [Mon, 7 Aug 2023 22:47:46 +0000 (18:47 -0400)]
Linux 6.5 compat: replace generic_file_splice_read with filemap_splice_read
The generic_file_splice_read function was removed in Linux 6.5 in favor
of filemap_splice_read. Add an autoconf test for filemap_splice_read and
use it if it is found as the handler for .splice_read in the
file_operations struct. Additionally, ITER_PIPE was removed in 6.5. This
change removes the ITER_* macros that OpenZFS doesn't use from being
tested in config/kernel-vfs-iov_iter.m4. The removal of ITER_PIPE was
causing the test to fail, which also affected the code responsible for
setting the .splice_read handler, above. That behavior caused run-time
panics on Linux 6.5.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15155
Ryan Lahfa [Mon, 7 Aug 2023 20:55:59 +0000 (22:55 +0200)]
linux/spl/kmem_cache: undefine `kmem_cache_alloc` before defining it
When compiling a kernel with bcachefs and zfs,
the two macros will collide, making it impossible
to have both filesystems.
It is sufficient to just undefine the macro before calling it.
On why this should be in ZFS rather than bcachefs, currently,
bcachefs is not a in-tree filesystem, but,
it has a reasonably high chance of getting included soon.
This avoids the breakage in ZFS early,
this patch may be distributed downstream in NixOS
and is already used there.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ryan Lahfa <ryan@lahfa.xyz>
Closes #15144
Alexander Motin [Mon, 7 Aug 2023 20:54:41 +0000 (16:54 -0400)]
Refactor dmu_prefetch().
- Split dmu_prefetch_dnode() from dmu_prefetch() into a separate
function. It is quite inconvenient to read the code where len = 0
means dnode prefetch instead indirect/data prefetch. One function
doing both has no benefits, since the code paths are independent.
- Improve dmu_prefetch() handling of long block ranges. Instead
of limiting L0 data length to prefetch for to dmu_prefetch_max,
make dmu_prefetch_max limit the actual amount of prefetch at the
specified level, and, if there is more, prefetch all the rest at
higher indirection level. It should improve random access times
within the prefetched range of any length, reducing importance of
specific dmu_prefetch_max value.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15076
Coleman Kane [Wed, 2 Aug 2023 21:05:46 +0000 (17:05 -0400)]
Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15138
This reverts commit b35374fd6474603170fd9a3c7503da6eb13ac712 as there
are error messages when loading the SPL module. Errors seemed to be tied
to duplicate a duplicate entry.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #15134
zpool_vdev_remove() should handle EALREADY error return
When the vdev properties features was merged an extra check
was added in `spa_vdev_remove_top_check()` which checked
whether the vdev that we want to remove is already being
removed and if so return an EALREADY error.
```
static int
spa_vdev_remove_top_check(vdev_t *vd)
{
... <snip> ...
/*
* This device is already being removed
*/
if (vd->vdev_removing)
return (SET_ERROR(EALREADY));
```
Before that change we'd still fail with an error but it
was a more generic one - here is the check that failed
later in the same function:
```
/*
* There can not be a removal in progress.
*/
if (spa->spa_removing_phys.sr_state == DSS_SCANNING)
return (SET_ERROR(EBUSY));
```
Changing the error code returned from that function changed
the behavior of the removal's library interface exposed to
the userland - `spa_vdev_remove()` now returns `EZFS_UNKNOWN`
instead of `EZFS_EBUSY` that was returning before.
This patch adds logic to make `spa_vdev_remove()` mindful
of the new EALREADY code and propagating `EZFS_EBUSY`
reverting to the previously established semantics of that
function.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Serapheim Dimitropoulos <serapheim@delphix.com>
Closes #15013
Closes #15129
Rob N [Tue, 1 Aug 2023 18:31:11 +0000 (04:31 +1000)]
linux/copy_file_range: properly request a fallback copy on Linux <5.3
Before Linux 5.3, the filesystem's copy_file_range handler had to signal
back to the kernel that we can't fulfill the request and it should
fallback to a content copy. This is done by returning -EOPNOTSUPP.
This commit converts the EXDEV return from zfs_clone_range to
EOPNOTSUPP, to force the kernel to fallback for all the valid reasons it
might be unable to clone. Without it the copy_file_range() syscall will
return EXDEV to userspace, breaking its semantics.
Add test for copy_file_range fallbacks. copy_file_range should always
fallback to a content copy whenever ZFS can't service the request with
cloning.
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #15131
Rob N [Tue, 1 Aug 2023 15:56:30 +0000 (01:56 +1000)]
zdb: include cloned blocks in block statistics
This gives `zdb -b` support for clone blocks.
Previously, it didn't know what clones were, so would count their space
allocation multiple times and then report leaked space (or, in debug,
would assert trying to claim blocks a second time).
This commit fixes those bugs, and reports the number of clones and the
space "used" (saved) by them.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15123
наб [Tue, 1 Aug 2023 15:50:17 +0000 (17:50 +0200)]
linux: zfs: ctldir: set [amc]time to snapshot's creation property
If looking up a snapdir inode failed, hold pool config – hold the
snapshot – get its creation property – release it – release it,
then use that as the [amc]time in the allocated inode. If that
fails then fall back to current time. No performance impact since
this is only done when allocating a new snapdir inode.
Coleman Kane [Sun, 30 Jul 2023 19:23:47 +0000 (15:23 -0400)]
Linux 4.20 compat: wrapper function for iov_iter type access
An iov_iter_type() function to access the "type" member of the struct
iov_iter was added at one point. Move the conditional logic to decide
which method to use for accessing it into a macro and simplify the
zpl_uio_init code.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
Coleman Kane [Sun, 23 Jul 2023 05:34:29 +0000 (01:34 -0400)]
Linux 6.4 compat: iter_iov() function now used to get old iov member
The iov_iter->iov member is now iov_iter->__iov and must be accessed via
the accessor function iter_iov(). Create a wrapper that is conditionally
compiled to use the access method appropriate for the target kernel
version.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15100
Coleman Kane [Tue, 1 Aug 2023 15:37:20 +0000 (11:37 -0400)]
Linux 6.5 compat: blkdev changes
Multiple changes to the blkdev API were introduced in Linux 6.5. This
includes passing (void* holder) to blkdev_put, adding a new
blk_holder_ops* arg to blkdev_get_by_path, adding a new blk_mode_t type
that replaces uses of fmode_t, and removing an argument from the release
handler on block_device_operations that we weren't using. The open
function definition has also changed to take gendisk* and blk_mode_t, so
update it accordingly, too.
Implement local wrappers for blkdev_get_by_path() and
vdev_blkdev_put() so that the in-line calls are cleaner, and place the
conditionally-compiled implementation details inside of both of these
local wrappers. Both calls are exclusively used within vdev_disk.c, at
this time.
Add blk_mode_is_open_write() to test FMODE_WRITE / BLK_OPEN_WRITE
The wrapper function is now used for testing using the appropriate
method for the kernel, whether the open mode is writable or not.
Emphasize fmode_t arg in zvol_release is not used
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15099
Coleman Kane [Tue, 1 Aug 2023 15:32:38 +0000 (11:32 -0400)]
Linux 6.5 compat: use disk_check_media_change when it exists
When disk_check_media_change() exists, then define
zfs_check_media_change() to simply call disk_check_media_change() on
the bd_disk member of its argument. Since disk_check_media_change()
is newer than when revalidate_disk was present in bops, we should
be able to safely do this via a macro, instead of recreating a new
implementation of the inline function that forces revalidation.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15101
Coleman Kane [Tue, 1 Aug 2023 15:27:58 +0000 (11:27 -0400)]
Linux 6.5 compat: register_sysctl_table removed
Additionally, the .child element of ctl_table has been removed in 6.5.
This change adds a new test for the pre-6.5 register_sysctl_table()
function, and uses the old code in that case. If it isn't found, then
the parentage entries in the tables are removed, and the register_sysctl
call is provided the paths of "kernel/spl", "kernel/spl/kmem", and
"kernel/spl/kstat" directly, to populate each subdirectory over three
calls, as is the new API.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15098
oromenahar [Tue, 1 Aug 2023 15:26:12 +0000 (17:26 +0200)]
Check the return value in clonefile test
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes #15128
Alexander Motin [Fri, 28 Jul 2023 20:30:33 +0000 (16:30 -0400)]
Remove fastwrite mechanism.
Fastwrite was introduced many years ago to improve ZIL writes spread
between multiple top-level vdevs by tracking number of allocated but
not written blocks and choosing vdev with smaller count. It suposed
to reduce ZIL knowledge about allocation, but actually made ZIL to
even more actively report allocation code about the allocations,
complicating both ZIL and metaslabs code.
On top of that, it seems ZIO_FLAG_FASTWRITE setting in dmu_sync()
was lost many years ago, that was one of the declared benefits. Plus
introduction of embedded log metaslab class solved another problem
with allocation rotor accounting both normal and log allocations,
since in most cases those are now in different metaslab classes.
After all that, I'd prefer to simplify already too complicated ZIL,
ZIO and metaslab code if the benefit of complexity is not obvious.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Wilson <george.wilson@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15107
Return the more descriptive EOPNOTSUPP instead of EXDEV when the
storage pool doesn't support block cloning.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Signed-off-by: Kay Pedersen <mail@mkwg.de>
Closes #15097
Alexander Motin [Thu, 27 Jul 2023 16:07:09 +0000 (12:07 -0400)]
Avoid waiting in dmu_sync_late_arrival().
The transaction there does not produce any dirty data or log blocks,
so it should not be throttled. All other cases wait for TXG sync, by
which time the log block we are writing will be obsolete, so we can
skip waiting and just return error here instead.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15096
Brian Behlendorf [Tue, 25 Jul 2023 20:55:29 +0000 (13:55 -0700)]
zed: Reduce log noise for large JBODs
For large JBODs the log message "zfs_iter_vdev: no match" can
account for the bulk of the log messages (over 70%). Since this
message is purely informational and not that useful we remove it.
Reviewed-by: Olaf Faaland <faaland1@llnl.gov> Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #15086
Closes #15094
Alexander Motin [Tue, 25 Jul 2023 16:08:36 +0000 (12:08 -0400)]
Remove zl_issuer_lock from zil_suspend().
This locking was recently added as part of #14979. But appears it
is illegal to take zl_issuer_lock while holding dp_config_rwlock,
taken by dsl_pool_hold(). It causes deadlock with sync thread in
spa_sync_upgrades(). On a second thought, we should not
need this locking, since zil_commit_impl() we call below takes
zl_issuer_lock, that should sufficiently protect zl_suspend reads,
combined with other logic from #14979.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15103
Rob Norris [Tue, 11 Jul 2023 10:46:33 +0000 (20:46 +1000)]
zts: block cloning tests
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Closes #405
Closes #13349
Rob Norris [Sun, 25 Jun 2023 10:50:19 +0000 (20:50 +1000)]
linux: implement filesystem-side copy/clone functions for EL7
Redhat have backported copy_file_range and clone_file_range to the EL7
kernel using an "extended file operations" wrapper structure. This
connects all that up to let cloning work there too.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Rob Norris [Tue, 27 Jun 2023 13:45:00 +0000 (23:45 +1000)]
linux: implement filesystem-side clone ioctls
Prior to Linux 4.5, the FICLONE etc ioctls were specific to BTRFS, and
were implemented as regular filesystem-specific ioctls. This implements
those ioctls directly in OpenZFS, allowing cloning to work on older
kernels.
There's no need to gate these behind version checks; on later kernels
Linux will simply never deliver these ioctls, instead calling the
approprate VFS op.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Note that dedupe_file_range() and remap_file_range(REMAP_FILE_DEDUP) are
hooked up here, but are not implemented yet.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Rob Norris [Mon, 24 Jul 2023 08:02:21 +0000 (18:02 +1000)]
dbuf_sync_leaf: check DB_READ in state assertions
Block cloning introduced a new state transition from DB_NOFILL to
DB_READ. This occurs when a block is cloned and then read on the
current txg.
In this case, the clone will move the dbuf to DB_NOFILL, and then the
read will be issued for the overidden block pointer. If that read is
still outstanding when it comes time to write, the dbuf will be in
DB_READ, which is not handled by the checks in dbuf_sync_leaf, thus
tripping the assertions.
This updates those checks to allow DB_READ as a valid state iff the
dirty record is for a BRT write and there is a override block pointer.
This is a safe situation because the block already exists, so there's
nothing that could change from underneath the read.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Original-patch-by: Kay Pedersen <mail@mkwg.de> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Rob Norris [Mon, 24 Jul 2023 07:54:05 +0000 (17:54 +1000)]
dmu_buf_will_clone: only check that current txg is clean
dbuf_undirty() will (correctly) only removed dirty records for the given
(open) txg. If there is a dirty record for an earlier closed txg that
has not been synced out yet, then db_dirty_records will still have
entries on it, tripping the assertion.
Instead, change the assertion to only consider the current txg. To some
extent this is redundant, as its really just saying "did dbuf_undirty()
work?", but it it doesn't hurt and accurately expresses our
expectations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Original-patch-by: Kay Pedersen <mail@mkwg.de> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Rob Norris [Thu, 22 Jun 2023 03:44:00 +0000 (13:44 +1000)]
brt_vdev_realloc: use vmem_alloc for large allocation
bv_entcount can be a relatively large allocation (see comment for
BRT_RANGESIZE), so get it from the big allocator.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Rob Norris [Thu, 22 Jun 2023 03:44:00 +0000 (13:44 +1000)]
zfs_clone_range: use vmem_malloc for large allocation
Just silencing the warning about large allocations.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kay Pedersen <mail@mkwg.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: OpenDrives Inc. Sponsored-By: Klara Inc.
Closes #15050
Alexander Motin [Mon, 24 Jul 2023 20:41:11 +0000 (16:41 -0400)]
ZIL: Fix config lock deadlock.
When we have some LWBs closed and their ZIOs ready to be issued, we
can not afford sleeping on config lock if somebody else try to lock
it as writer, or it will cause a deadlock.
To solve it, move spa_config_enter() from zil_lwb_write_issue() to
zil_lwb_write_close() under zl_issuer_lock to enforce lock ordering
with other threads. Now if we can't immediately lock config, issue
all previously closed LWBs so that they could drop their config
locks after completion, and only then allow sleeping on our lock.
Reviewed-by: Mark Maybee <mark.maybee@delphix.com> Reviewed-by: Prakash Surya <prakash.surya@delphix.com> Reviewed-by: George Wilson <george.wilson@delphix.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15078
Closes #15080
Brian Behlendorf [Mon, 24 Jul 2023 18:20:42 +0000 (11:20 -0700)]
Linux 6.4 compat: META
Update the META file to reflect compatibility with the 6.4 kernel.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #15095
Rob N [Fri, 21 Jul 2023 18:52:32 +0000 (04:52 +1000)]
metaslab: tuneable to better control force ganging
metaslab_force_ganging isn't enough to actually force ganging, because
it still only forces 3% of the time. This adds
metaslab_force_ganging_pct so we can configure how often to force
ganging.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc.
Closes #15088
Alexander Motin [Fri, 21 Jul 2023 18:51:47 +0000 (14:51 -0400)]
Adjust prefetch parameters.
- Reduce maximum prefetch distance for 32bit platforms to 8MB as it
was previously. Those systems didn't grow much probably, so better
stay conservative there.
- Retire array_rd_sz tunable, blocking prefetch for large requests.
We should not penalize applications trying to be more efficient. The
speculative prefetcher by itself has reasonable distance limits, and
1MB is not much at all these days.
Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15072
Alexander Motin [Fri, 21 Jul 2023 18:50:48 +0000 (14:50 -0400)]
Add explicit prefetches to bpobj_iterate().
To simplify error handling bpobj_iterate_blkptrs() iterates through
the list of block pointers backwards. Unfortunately speculative
prefetcher is currently unable to detect such patterns, that makes
each block read there synchronous and very slow on HDD pools.
According to my tests, added explicit prefetch reduces time needed
to asynchronously delete 8 snapshots of 4 million blocks each from
20 seconds to less than one, that should free sync thread for other
useful work, such as async writes, scrub, etc.
While there, plug one memory leak in case of bpobj_open() error and
harmonize some variable names.
Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15071
Alan Somers [Tue, 11 Jul 2023 21:13:57 +0000 (15:13 -0600)]
Don't emit cksum_{actual_expected} in ereport.fs.zfs.checksum events
With anything but fletcher-4, even a tiny change in the input will cause
the checksum value to change completely. So knowing the actual and
expected checksums doesn't provide much more information than "they
don't match". The harm in sending them is simply that they bloat the
event. In particular, on FreeBSD the event must fit into a 1016 byte
buffer.
Fixes #14717 for mirrored pools.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rich Ercolani <rincebrain@gmail.com> Signed-off-by: Alan Somers <asomers@gmail.com> Sponsored-by: Axcient
Closes #14717
Closes #15052
Alan Somers [Tue, 11 Jul 2023 20:45:06 +0000 (14:45 -0600)]
Don't emit checksum histograms in ereport.fs.zfs.checksum events
The checksum histograms were intended to be used with ATA and parallel
SCSI, which are obsolete. With modern storage hardware, they will
almost always look like white noise; all bits will be wrong. They only
serve to bloat the event. That's a particular problem on FreeBSD, where
events must fit into a 1016 byte buffer.
This fixes issue #14717 for RAIDZ pools, but not for mirror pools.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Rich Ercolani <rincebrain@gmail.com> Signed-off-by: Alan Somers <asomers@gmail.com> Sponsored-by: Axcient
Closes #15052
Tony Hutter [Fri, 21 Jul 2023 18:46:58 +0000 (11:46 -0700)]
zed: Fix zed ASSERT on slot power cycle
We would see zed assert on one of our systems if we powered off a
slot. Further examination showed zfs_retire_recv() was reporting
a GUID of 0, which in turn would return a NULL nvlist. Add
in a check for a zero GUID.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #15084
We cannot call zpl_enter in zpl_test_super, because zpl_test_super is
under spinlock so we can't sleep, and also because zpl_test_super is
called without sb->s_umount taken, so it's possible we would race with
zfs_umount and call zpl_enter on freed zfsvfs.
Ameer Hamza [Thu, 20 Jul 2023 17:23:52 +0000 (22:23 +0500)]
spa_min_alloc should be GCD, not min
Since spa_min_alloc may not be a power of 2, unlike ashifts, in the
case of DRAID, we should not select the minimal value among several
vdevs. Rounding to a multiple of it is unlikely to work for other
vdevs. Instead, using the greatest common divisor produces smaller
yet more reasonable results.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15067
Ameer Hamza [Thu, 20 Jul 2023 16:57:16 +0000 (21:57 +0500)]
Ignore pool ashift property during vdev attachment
Ashift can be set for a vdev only during its creation, and the
top-level vdev does not change when a vdev is attached or replaced.
The ashift property should not be used during attachment, as it
does not allow attaching/replacing a vdev if the pool's ashift
property is increased after the existing vdev was created. Instead,
we should be able to attach the vdev if the attached vdev can
satisfy the ashift requirement with its parent.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15061
On my machines I observe random failures caused by rollback happening
after zfs root is mounted. I've observed two types of failures:
- zfs-rollback-bootfs.service fails saying that rollback must be
done just before mounting the dataset
- boot process fails and rescue console is entered.
After making this modification and testing it for couple of days
none of those problems have been observed anymore.
I don't know if `dracut-mount.service` is still needed in the
`After` directive. Maybe someone else is able to address this?
Reviewed-by: Gregory Bartholomew <gregory.lee.bartholomew@gmail.com> Signed-off-by: Wojciech Małota-Wójcik <59281144+outofforest@users.noreply.github.com>
Closes #15025
Alexander Motin [Thu, 20 Jul 2023 16:10:04 +0000 (12:10 -0400)]
Do not request data L1 buffers on scan prefetch.
Set ARC_FLAG_NO_BUF when prefetching data L1 buffers for scan. We
do not prefetch data L0 buffers, so we do not need the L1 buffers,
only want them to be ready in ARC. This saves some CPU time on the
buffers decompression.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15029
Coleman Kane [Thu, 20 Jul 2023 16:09:25 +0000 (12:09 -0400)]
Linux 6.5 compat: disk_check_media_change() was added
The disk_check_media_change() function was added which replaces
bdev_check_media_change. This change was introduced in 6.5rc1 444aa2c58cb3b6cfe3b7cc7db6c294d73393a894 and the new function takes a
gendisk* as its argument, no longer a block_device*. Thus, bdev->bd_disk
is now used to pass the expected data.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15060
As it turns out having autotrim default to 'on' on FreeBSD never really
worked due to mess with defines where userland and kernel module were
getting different default values (userland was defaulting to 'off',
module was thinking it's 'on').
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Yuri Pankov <yuripv@FreeBSD.org>
Closes #15079
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15059
Coleman Kane [Fri, 14 Jul 2023 23:32:49 +0000 (19:32 -0400)]
intptr_t definition is canonically signed
Make the version here match that elsewhere in the kernel and system
headers.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Coleman Kane <ckane@colemankane.org>
Closes #15058
Alexander Motin [Fri, 14 Jul 2023 23:16:40 +0000 (19:16 -0400)]
Fix raw receive with different indirect block size.
Unlike regular receive, raw receive require destination to have the
same block structure as the source. In case of dnode reclaim this
triggers two special cases, requiring special handling:
- If dn_nlevels == 1, we can change the ibs, but dnode_set_blksz()
should not dirty the data buffer if block size does not change, or
durign receive dbuf_dirty_lightweight() will trigger assertion.
- If dn_nlevels > 1, we just can't change the ibs, dnode_set_blksz()
would fail and receive_object would trigger assertion, so we should
destroy and recreate the dnode from scratch.
Reviewed-by: Paul Dagnelie <pcd@delphix.com>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15039
Alan Somers [Fri, 14 Jul 2023 23:13:15 +0000 (17:13 -0600)]
Fix the ZFS checksum error histograms with larger record sizes
My analysis in PR #14716 was incorrect. Each histogram bucket contains
the number of incorrect bits, by position in a 64-bit word, over the
entire record. 8-bit buckets can overflow for record sizes above 2k.
To forestall that, saturate each bucket at 255. That should still get
the point across: either all bits are equally wrong, or just a couple
are.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Alan Somers <asomers@gmail.com> Sponsored-by: Axcient
Closes #15049
Alexander Motin [Fri, 14 Jul 2023 23:11:46 +0000 (19:11 -0400)]
Avoid extra snprintf() in dsl_deadlist_merge().
Since we are already iterating the ZAP, we have exact string key to
remove, we do not need to call zap_remove_int() with the int key we
just converted, we can call zap_remove() for the original string.
This should make no functional change, only a micro-optimization.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15056
Alexander Motin [Thu, 13 Jul 2023 16:12:55 +0000 (12:12 -0400)]
Add missed DMU_PROJECTUSED_OBJECT prefetch.
It seems 9c5167d19f "Project Quota on ZFS" missed to add prefetch
for DMU_PROJECTUSED_OBJECT during scan (scrub/resilver). It should
not cause visible problems, but may affect scub/resilver performance.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15024
Starting approximately from version 1302506 vn_lock_pair() grown two
additional arguments following head. There is a one week hole, but
that is closet reference point we have.
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15047
Brian Behlendorf [Fri, 30 Jun 2023 20:32:18 +0000 (13:32 -0700)]
Update META
Increase the version to 2.2.99 to indicate the master branch is
newer than the 2.2.x release. This ensures packages built from
master branch are considered to be newer than the last release.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Prakash Surya [Fri, 30 Jun 2023 18:34:05 +0000 (11:34 -0700)]
Enable tuning of ZVOL open timeout value
The default timeout for ZVOL opens may not be sufficient for all cases,
so we should enable the value to be more easily tuned to account for
systems where the default value is insufficient.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Signed-off-by: Prakash Surya <prakash.surya@delphix.com>
Closes #15023
Rich Ercolani [Fri, 30 Jun 2023 16:42:02 +0000 (12:42 -0400)]
Pack our DDT ZAPs a bit denser.
The DDT is really inefficient on 4k and up vdevs, because it always
allocates 4k blocks, and while compression could save us somewhat
at ashift 9, that stops being true.
So let's change the default to 32 KiB, which seems like a reasonable
compromise between improved space savings and inflated write sizes
for DDT updates.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rich Ercolani <rincebrain@gmail.com>
Closes #14654
Rob N [Fri, 30 Jun 2023 16:01:58 +0000 (02:01 +1000)]
ddt_addref: remove unnecessary phys fill when refcount is 0
The previous comment wondered if this case could happen; it turns out
that it really can't.
This block can only be entered if dde_type and dde_class are "real";
that only happens when a ddt entry has been previously synced to a ddt
store, that is, it was created on a previous txg. Since its gone through
that sync, its dde_refcount must be >0.
ddt_addref() is called from brt_pending_apply(), which is called at the
beginning of spa_sync(), before pending DMU writes/frees are issued.
Freeing a dedup block is the only thing that can decrement dde_refcount,
so there's no way for it to drop to zero before applying the clone bumps
it.
Further, even if it _could_ go to zero, it wouldn't be necessary to fill
the entry from the block. The phys content is not cleared until the free
is issued, which happens when the refcount goes to zero, when the last
real free comes through. The cloned block should be identical to what's
in the phys already, so the fill should be a no-op anyway.
I've replaced this with an assertion because this is all very dependent
on the ordering in which BRT and DDT changes are applied, and that might
change in the future.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-By: Klara, Inc.
Closes #15004
Alexander Motin [Fri, 30 Jun 2023 15:59:39 +0000 (11:59 -0400)]
Again fix race between zil_commit() and zil_suspend().
With zl_suspend read in zil_commit() not protected by any locks it
is possible for new ZIL writes to be in progress while zil_destroy()
called by zil_suspend() freeing them. This patch closes the race
by taking zl_issuer_lock in zil_suspend() and adding the second
zl_suspend check to zil_get_commit_list(), protected by the lock.
It allows all already queued transactions to be logged normally,
while blocks any new ones, calling txg_wait_synced() for the TXGs.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #14979
Alexander Motin [Fri, 30 Jun 2023 15:54:00 +0000 (11:54 -0400)]
Some ZIO micro-optimizations.
- Pack struct zio_prop by 4 bytes from 84 to 80.
- Skip new child ZIO locking while linking to parent. The newly
allocated ZIO is not externally visible yet, so nobody should care.
- Skip io_bp_copy writes when not used (write && non-debug).
Reviewed-by: Brian Atkinson <batkinson@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #14985
Alexander Motin [Fri, 30 Jun 2023 15:47:13 +0000 (11:47 -0400)]
Do not report bytes skipped by scan as issued.
Scan process may skip blocks based on their birth time, DVA, etc.
Traditionally those blocks were accounted as issued, that caused
reporting of hugely over-inflated numbers, having nothing to do
with actual disk I/O. This change utilizes never used field in
struct dsl_scan_phys to account such skipped bytes, allowing to
report how much data were actually scrubbed/resilvered and what
is the actual I/O speed. While formally it is an on-disk format
change, it should be compatible both ways, so should not need a
feature flag.
This should partially address the same issue as c85ac731a0e, but
from a different perspective, complementing it.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Akash B <akash-b@hpe.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15007
Arshad Hussain [Fri, 30 Jun 2023 15:37:26 +0000 (21:07 +0530)]
Don't use hard-coded 'size' value in snprintf()
This patch changes the passing of "size" to snprintf
from hard-coded (openended) to sizeof(errbuf). This
is bringing to standard with rest of the code where-
ever 'errbuf' is used.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Arshad Hussain <arshad.hussain@aeoncomputing.com>
Closes #15003
Alexander Motin [Fri, 30 Jun 2023 15:36:43 +0000 (11:36 -0400)]
Fix remount when setting multiple properties.
The previous code was checking zfs_is_namespace_prop() only for the
last property on the list. If one was not "namespace", then remount
wasn't called. To fix that move zfs_is_namespace_prop() inside the
loop and remount if at least one of properties was "namespace".
Reviewed-by: Umer Saleem <usaleem@ixsystems.com> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #15000
projects / mirror_zfs.git / log