Jitendra Patidar [Tue, 27 Aug 2024 00:36:49 +0000 (06:06 +0530)]
Fix issig() to check signal_pending after dequeue SIGSTOP/SIGTSTP
When process got SIGSTOP/SIGTSTP, issig() dequeue them and return 0.
But process could still have another signal pending after dequeue. So,
after dequeue, check and return 1, if signal_pending.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes #16464
zpool: Provide GUID to zpool-reguid(8) with -g (#16239)
This commit extends the zpool-reguid(8) command with a -g flag, which
allows the user to specify the GUID to set.
This change also adds some general tests for zpool-reguid(8).
Sponsored-by: Wasabi Technology, Inc. Sponsored-by: Klara, Inc. Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Rob Norris [Fri, 23 Aug 2024 17:40:45 +0000 (03:40 +1000)]
spl-taskq: fix task counts for delayed and cancelled tasks
Dispatched delayed tasks were not added to tasks_total, and cancelled
tasks were not removed. This notably could make tasks_total go to
UNIT64_MAX, but just generally meant the count could be wrong. So lets
not!
Sponsored-by: Klara, Inc. Sponsored-by: Syneto Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16473
Low-power [Fri, 23 Aug 2024 17:39:09 +0000 (01:39 +0800)]
Make mount.zfs(8) calling zfs_mount_at for legacy mounts as well
Commit 329e2ffa4bca456e65c3db7f5c5c04931c551b61 has made mount.zfs(8) to
call libzfs function 'zfs_mount_at', in order to propagate dataset
properties into mount options. This fix however, is limited to a special
use case where mount.zfs(8) is used in initrd with option '-o zfsutil'.
If either initrd or the user need to use mount.zfs(8) to mount a file
system with 'mountpoint' set to 'legacy', '-o zfsutil' can't be used and
the original issue #7947 will still happen.
Since the existing code already excluded the possibility of calling
'zfs_mount_at' when it was invoked as a helper program from zfs(8), by
checking 'ZFS_MOUNT_HELPER' environment variable, it makes no sense to
avoid calling 'zfs_mount_at' without '-o zfsutil'.
An exception however, is when mount.zfs(8) was invoked with '-o remount'
to update the mount options for an existing mount point. In this case
call mount(2) directly without modifying the mount options passed from
command line.
Furthermore, don't run mount.zfs(8) helper for automounting snapshot.
The above change to make mount.zfs(8) to call 'zfs_mount_at'
apparently caused it to trigger an automount for the snapshot
directory. When the helper was invoked as a result of a snapshot
automount, an infinite recursion will occur.
Since the need of invoking user mode mount(8) for automounting was to
overcome that the 'vfs_kern_mount' being GPL-only, just run mount(8)
without the mount.zfs(8) helper by adding option '-i'.
Rob Norris [Tue, 23 Jul 2024 01:43:18 +0000 (11:43 +1000)]
zstream recompress: fix zero recompressed buffer and output
If compression happend, any garbage past the compress size was not
zeroed out.
If compression didn't happen, then the payload size was still set to
the rounded-up return from zio_compress_data(), which is dependent on
the input, which is not necessarily the logical size.
So that's all fixed too, mostly from stealing the math from zio.c.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Rob Norris [Tue, 23 Jul 2024 01:43:18 +0000 (11:43 +1000)]
zstream decompress: fix decompress size and output
This was incorrectly using the compressed length for the size of the
decompress buffer, and quietly doing nothing if the decompressor refused
to decompress the block because there wasn't enough space.
After that, it wasn't correctly rewriting the record to indicate
"not compressed".
So that's fixed now. Sigh.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Rob Norris [Fri, 5 Jul 2024 03:39:33 +0000 (13:39 +1000)]
zio_compress_data: limit dest length to ABD size
Some callers (eg `do_corrective_recv()`) pass in a dest buffer much
smaller than the wanted 87.5% of the source buffer, because the
incoming abd is larger than the source data and they "know" what the
decompressed size with be.
However, `abd_borrow_buf()` rightly asserts if we try to borrow more
than is available, so these callers fail.
Previously when all we had was a dest buffer, we didn't know how big it
was, so we couldn't do anything. Now we have a dest abd, with a size, so
we can clamp dest size to the abd size.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Rob Norris [Sun, 30 Jun 2024 02:10:00 +0000 (12:10 +1000)]
compress: change compression providers API to use ABDs
This commit changes the provider compress and decompress API to take ABD
pointers instead of buffer pointers for both data source and
destination. It then updates all providers to match.
This doesn't actually change the providers to do chunked compression,
just changes the API to allow such an update in the future. Helper
macros are added to easily adapt the ABD functions to their buffer-based
implementations.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Rob Norris [Thu, 4 Jul 2024 06:11:12 +0000 (16:11 +1000)]
compress: rework callers to always use the zio_compress calls
This will make future refactoring easier.
There are two we can't change for the moment, because zio_compress_data
does hole detection & collapsing which zio_decompress_data does not
actually know how to handle.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Tony Hutter [Thu, 22 Aug 2024 00:38:06 +0000 (17:38 -0700)]
Linux 6.10 compat: META
Update the META file to reflect compatibility with the 6.10 kernel.
Reviewed-by: Rob Norris <robn@despairlabs.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #16466
Rob Norris [Sun, 21 Apr 2024 06:37:06 +0000 (16:37 +1000)]
libzpool/abd_os: iovec-based scatter abd
This is intended to be a simple userspace scatter abd based on struct
iovec. It's not very sophisticated as-is, but sets a base for something
much more interesting.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16253
Rob Norris [Mon, 1 Apr 2024 04:37:34 +0000 (15:37 +1100)]
abd_os: break out platform-specific header parts
Removing the platform #ifdefs from shared headers in favour of
per-platform headers. Makes abd_t much leaner, among other things.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16253
Rob Norris [Mon, 25 Dec 2023 11:25:48 +0000 (22:25 +1100)]
abd_os: split userspace and Linux kernel code
The Linux abd_os.c serves double-duty as the userspace scatter abd
implementation, by carrying an emulation of kernel scatterlists. This
commit lifts common and userspace-specific parts out into a separate
abd_os.c for libzpool.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16253
Rob Norris [Tue, 4 Jun 2024 17:13:05 +0000 (13:13 -0400)]
zio: no alloc canary in userspace
Makes it harder to use memory debuggers like valgrind directly, because
they can't see canary overruns.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16253
Rob Norris [Fri, 7 Jun 2024 08:00:31 +0000 (18:00 +1000)]
abd: remove ABD_FLAG_ZEROS
Nothing ever checks it.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16253
shodanshok [Wed, 21 Aug 2024 17:00:33 +0000 (19:00 +0200)]
Ignore zfs_arc_shrinker_limit in direct reclaim mode
zfs_arc_shrinker_limit (default: 10000) avoids ARC collapse
due to excessive memory reclaim. However, when the kernel is
in direct reclaim mode (ie: low on memory), limiting ARC reclaim
increases OOM risk. This is especially true on system without
(or with inadequate) swap.
This patch ignores zfs_arc_shrinker_limit when the kernel is in
direct reclaim mode, avoiding most OOM. It also restores
"echo 3 > /proc/sys/vm/drop_caches" ability to correctly drop
(almost) all ARC.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Adam Moss <c@yotes.com> Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes #16313
Ameer Hamza [Tue, 20 Aug 2024 13:45:26 +0000 (18:45 +0500)]
linux/zvol_os.c: cleanup limits for non-blk mq case
Rob Noris suggested that we could clean up redundant limits for the case
of non-blk mq scenario.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Rob Norris <robn@despairlabs.com> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #16462
Ameer Hamza [Mon, 19 Aug 2024 20:30:57 +0000 (01:30 +0500)]
linux/zvol_os.c: Fix max_discard_sectors limit for 6.8+ kernel
In kernels 6.8 and later, the zvol block device is allocated with
qlimits passed during initialization. However, the zvol driver does not
set `max_hw_discard_sectors`, which is necessary to properly
initialize `max_discard_sectors`. This causes the `zvol_misc_trim` test
to fail on 6.8+ kernels when invoking the `blkdiscard` command. Setting
`max_hw_discard_sectors` in the `HAVE_BLK_ALLOC_DISK_2ARG` case resolve
the issue.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Rob Norris <robn@despairlabs.com> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #16462
Rob Norris [Fri, 3 May 2024 04:42:51 +0000 (14:42 +1000)]
spl-taskq: per-taskq kstats
This exposes a variety of per-taskq stats under /proc/spl/kstat/taskq,
one file per taskq, named for the taskq name.instance.
These include a small amount of info about the taskq config, the current
state of the threads and queues, and various counters for thread and
queue activity since the taskq was created.
To assist with decrementing queue size counters, the list an entry is on
is encoded in spare bits in the entry flags.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: Syneto
Closes #16171
Chunwei Chen [Mon, 19 Aug 2024 16:42:17 +0000 (09:42 -0700)]
Skip ro check for snaps when multi-mount
Skip ro check for snapshots since they are always ro regardless if ro
flag is passed by mount or not. This allows multi-mounting snapshots
without requiring to specify ro flag.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@nutanix.com>
Closes #16299
shodanshok [Fri, 16 Aug 2024 20:34:07 +0000 (22:34 +0200)]
Enable L2 cache of all (MRU+MFU) metadata but MFU data only
`l2arc_mfuonly` was added to avoid wasting L2 ARC on read-once MRU
data and metadata. However it can be useful to cache as much
metadata as possible while, at the same time, restricting data
cache to MFU buffers only.
This patch allow for such behavior by setting `l2arc_mfuonly` to 2
(or higher). The list of possible values is the following:
0: cache both MRU and MFU for both data and metadata;
1: cache only MFU for both data and metadata;
2: cache both MRU and MFU for metadata, but only MFU for data.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Gionatan Danti <g.danti@assyoma.it>
Closes #16343
Closes #16402
Allan Jude [Tue, 23 Jul 2024 20:51:01 +0000 (20:51 +0000)]
Man page updates for dmu_ddt_copies
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Allan Jude <allan@klarasystems.com>
Closes #15895
Rob Norris [Mon, 25 Sep 2023 01:02:46 +0000 (11:02 +1000)]
ddt: lookup and log stats
Adds per-DDT stats counting lookups and where they were serviced from
(either log or backing zap), number of log entries in memory, and flow
rates.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Mon, 16 Oct 2023 00:52:17 +0000 (11:52 +1100)]
ddt: block scan until log is flushed, and flush aggressively
The dedup log does not have a stable cursor, so its not possible to
persist our current scan location within it across pool reloads.
Beccause of this, when walking (scanning), we can't treat it like just
another source of dedup entries.
Instead, when a scan is wanted, we switch to an aggressive flushing
mode, pushing out entries older than the scan start txg as fast as we
can, before starting the scan proper.
Entries after the scan start txg will be handled via other methods; the
DDT ZAPs and logs will be written as normal, and blocks not seen yet
will be offered to the scan machinery as normal.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Thu, 22 Jun 2023 07:46:22 +0000 (17:46 +1000)]
ddt: dedup log
Adds a log/journal to dedup. At the end of txg, instead of writing the
entry directly to the ZAP, instead its adding to an in-memory tree and
appended to an on-disk object. The on-disk object is only read at
import, to reload the in-memory tree.
Lookups first go the the log tree before going to the ZAP, so
recently-used entries will remain close by in memory. This vastly
reduces overhead from dedup IO, as it will not have to do so many
read/update/write cycles on ZAP leaf nodes.
A flushing facility is added at end of txg, to push logged entries out
to the ZAP. There's actually two separate "logs" (in-memory tree and
on-disk object), one active (recieving updated entries) and one flushing
(writing out to disk). These are swapped (ie flushing begins) based on
memory used by the in-memory log trees and time since we last flushed
something.
The flushing facility monitors the amount of entries coming in and being
flushed out, and calibrates itself to try to flush enough each txg to
keep up with the ingest rate without competing too much with other IO.
Multiple tuneables are provided to control the flushing facility.
All the histograms and stats are update to accomodate the log as a
separate entry store. zdb gains knowledge of how to count them and dump
them. Documentation included!
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Fri, 6 Oct 2023 06:06:34 +0000 (17:06 +1100)]
ddt: tuneable to override copies= on dedup metadata objects
All objects stored in the MOS get copies=3. For a large dedup table,
this requires significant extra IO and disk space, when its not really
necessary - the dedup table itself isn't needed to read or write data,
only to keep data usage down. Losing the dedup table does not render the
pool unusable, it just messes up the accounting somewhat.
This adds a dmu_ddt_copies tuneable. When set to 0, the existing
behaviour is used. When set higher, dedup table blocks (ZAP and log)
will have this many copies rather than the usual 3, while indirect
blocks will have one more again.
This is a tuneable for now mostly for testing. Losing a dedup table can
cause blocks to be leaked, and we currently have no facilities to repair
that.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Wed, 11 Oct 2023 01:46:55 +0000 (12:46 +1100)]
ddt: compare keys 64-bits at a time, trying to match ZAP order
This yields substantial performance improvements when we only write out
some small % of entries at a time, as it will cause entries that will go
into "nearby" ZAP leaf nodes to be grouped closer together in the AVL, and
so touch fewer blocks. Without this, the distribution is an even spread,
so we touch a lot more ZAP leaf nodes for any given number of entries.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Thu, 15 Jun 2023 07:19:41 +0000 (17:19 +1000)]
ddt: cleanup the stats & histogram code
Both the API and the code were kinda mangled and I was really struggling
to follow it. The worst offender was the old ddt_stat_add(); after
fixing it up the rest of the changes are mostly knock-on effects and
targets of opportunity.
Note that the old ddt_stat_add() was safe against overflows - it could
produce crazy numbers, but the compiler wouldn't do anything stupid. The
assertions in ddt_stat_sub() go a lot of the way to protecting against
this; getting in a position where overflows are a problem is definitely
a programming error.
Also expanding ddt_stat_add() and ddt_histogram_empty() produces less
efficient assembly. I'm not bothered about this right now though; these
should not be hot functions, and if they are we'll optimise them later.
If we have to go back to the old form, we'll comment it like crazy.
Finally, I've removed the assertion that the bucket will never be
negative, as it will soon be possible to have entries with zero
refcounts: an entry for a block that is no longer on the pool, but is on
the log waiting to be synced out. It might be better to have a separate
bucket for these, since they're still using real space on disk, but
ultimately these stats are driving UI, and for now I've chosen to keep
them matching how they've looked in the past, as well as match the
operators mental model - pool usage is managed elsewhere.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15895
Rob Norris [Tue, 20 Jun 2023 01:09:48 +0000 (11:09 +1000)]
ddt: add "flat phys" feature
Traditional dedup keeps a separate ddt_phys_t "type" for each possible
count of DVAs (that is, copies=) parameter. Each of these are tracked
independently of each other, and have their own set of DVAs. This leads
to an (admittedly rare) situation where you can create as many as six
copies of the data, by changing the copies= parameter between copying.
This is both a waste of storage on disk, but also a waste of space in
the stored DDT entries, since there never needs to be more than three
DVAs to handle all possible values of copies=.
This commit adds a new FDT feature, DDT_FLAG_FLAT. When active, only the
first ddt_phys_t is used. Each time a block is written with the dedup
bit set, this single phys is checked to see if it has enough DVAs to
fulfill the request. If it does, the block is filled with the saved DVAs
as normal. If not, an adjusted write is issued to create as many extra
copies as are needed to fulfill the request, which are then saved into
the entry too.
Because a single phys is no longer an all-or-nothing, but can be
transitioning from fewer to more DVAs, the write path now has to keep a
copy of the previous "known good" DVA set so we can revert to it in case
an error occurs. zio_ddt_write() has been restructured and heavily
commented to make it much easier to see what's happening.
Backwards compatibility is maintained simply by allocating four
ddt_phys_t when the DDT_FLAG_FLAT flag is not set, and updating the phys
selection macros to check the flag. In the old arrangement, each number
of copies gets a whole phys, so it will always have either zero or all
necessary DVAs filled, with no in-between, so the old behaviour
naturally falls out of the new code.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15893
Rob Norris [Mon, 3 Jul 2023 09:54:40 +0000 (19:54 +1000)]
ddt: slim down ddt_entry_t
This slims down the in-memory entry to as small as it can be. The
IO-related parts are made into a separate entry, since they're
relatively rarely needed.
The variable allocation for dde_phys is to support the upcoming flat
format.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15893
Rob Norris [Mon, 3 Jul 2023 12:16:04 +0000 (22:16 +1000)]
ddt: introduce lightweight entry
The idea here is that sometimes you need the contents of an entry with
no intent to modify it, and/or from a place where its difficult to get
hold of its originating ddt_t to know how to interpret it.
A lightweight entry contains everything you might need to "read" an
entry - its key, type and phys contents - but none of the extras for
modifying it or using it in a larger context. It also has the full
complement of phys slots, so it can represent any kind of dedup entry
without having to know the specific configuration of the table it came
from.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15893
Rob Norris [Mon, 3 Jul 2023 05:16:02 +0000 (15:16 +1000)]
ddt: rework access to phys array slots
The "flat phys" feature will use only a single phys slot for all
entries, which means the old "single", "double" etc naming now makes no
sense, and more importantly, means that choosing the right slot for a
given block pointer will depend on how many slots are in use for a given
DDT.
This removes the old names, and adds accessor macros to decouple
specific phys array indexes from any particular meaning.
(These macros look strange in isolation, mainly in the way they take the
ddt_t* as an arg but don't use it. This is mostly a separate commit to
introduce the concept to the reader before the "flat phys" commit
extends it).
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15893
Rob Norris [Tue, 18 Jun 2024 04:11:11 +0000 (14:11 +1000)]
zdb: rework DDT block count and leak check to just count the blocks
The upcoming dedup features break the long held assumption that all
blocks on disk with a 'D' dedup bit will always be present in the DDT,
or will have the same set of DVA allocations on disk as in the DDT.
If the DDT is no longer a complete picture of all the dedup blocks that
will be and should be on disk, then it does us no good to walk and prime
it up front, since it won't necessarily match up with every block we'll
see anyway.
Instead, we rework things here to be more like the BRT checks. When we
see a dedup'd block, we look it up in the DDT, consume a refcount, and
for the second-or-later instances, count them as duplicates.
The DDT and BRT are moved ahead of the space accounting. This will
become important for the "flat" feature, which may need to count a
modified version of the block.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Co-authored-by: Don Brady <don.brady@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15892
Rob Norris [Thu, 13 Jun 2024 04:50:33 +0000 (14:50 +1000)]
ZTS: tests for dedup legacy/FDT tables
Very basic coverage to make sure things appear to work, have the right
format on disk, and pool upgrades and mixed table types work as
expected.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15892
Rob Norris [Tue, 20 Jun 2023 02:06:13 +0000 (12:06 +1000)]
ddt: add FDT feature and support for legacy and new on-disk formats
This is the supporting infrastructure for the upcoming dedup features.
Traditionally, dedup objects live directly in the MOS root. While their
details vary (checksum, type and class), they are all the same "kind" of
thing - a store of dedup entries.
The new features are more varied than that, and are better thought of as
a set of related stores for the overall state of a dedup table.
This adds a new feature flag, SPA_FEATURE_FAST_DEDUP. Enabling this will
cause new DDTs to be created as a ZAP in the MOS root, named
DDT-<checksum>. The is used as the root object for the normal type/class
store objects, but will also be a place for any storage required by new
features.
This commit adds two new fields to ddt_t, for version and flags. These
are intended to describe the structure and features of the overall dedup
table, and are stored as-is in the DDT root. In this commit, flags are
always zero, but the intent is that they can be used to hang optional
logic or state onto for new dedup features. Version is always 1.
For a "legacy" dedup table, where no DDT root directory exists, the
version will be 0.
ddt_configure() is expected to determine the version and flags features
currently in operation based on whether or not the fast_dedup feature is
enabled, and from what's available on disk. In this way, its possible to
support both old and new tables.
This also provides a migration path. A legacy setup can be upgraded to
FDT by creating the DDT root ZAP, moving the existing objects into it,
and setting version and flags appropriately. There's no support for that
here, but it would be straightforward to add later and allows the
possibility that newer features could be applied to existing dedup
tables.
Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Co-authored-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Rob Norris <rob.norris@klarasystems.com> Sponsored-by: Klara, Inc. Sponsored-by: iXsystems, Inc.
Closes #15892
zvol queue limits initialization depends on `zv_volblocksize`, but it is
initialized later, leading to several limits being initialized with
incorrect values, including `max_discard_*` limits. This also causes
`blkdiscard` command to consistently fail, as `blk_ioctl_discard` reads
`bdev_max_discard_sectors()` limits as 0, leading to failure. The fix is
straightforward: initialize `zv->zv_volblocksize` early, before setting
the queue limits. This PR should fix `zvol/zvol_misc/zvol_misc_trim`
failure on recent PRs, as the test case issues `blkdiscard` for a zvol.
Additionally, `zvol_misc_trim` was recently enabled in `6c7d41a`,
which is why the issue wasn't identified earlier.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #16454
Justin Gottula [Thu, 15 Aug 2024 21:13:18 +0000 (14:13 -0700)]
Fix null ptr deref when renaming a zvol with snaps and snapdev=visible (#16316)
If a zvol is renamed, and it has one or more snapshots, and
snapdev=visible is true for the zvol, then the rename causes a kernel
null pointer dereference error. This has the effect (on Linux, anyway)
of killing the z_zvol taskq kthread, with locks still held; which in
turn causes a variety of zvol-related operations afterward to hang
indefinitely (such as udev workers, among other things).
The problem occurs because of an oversight in #15486
(e36ff84c338d2f7b15aef2538f6a9507115bbf4a). As documented in
dataset_kstats_create, some datasets may not actually have kstats
allocated for them; and at least at the present time, this is true for
snapshots. In practical terms, this means that for snapshots,
dk->dk_kstats will be NULL. The dataset_kstats_rename function
introduced in the patch above does not first check whether dk->dk_kstats
is NULL before proceeding, unlike e.g. the nearby
dataset_kstats_update_* functions.
In the very particular circumstance in which a zvol is renamed, AND that
zvol has one or more snapshots, AND that zvol also has snapdev=visible,
zvol_rename_minors_impl will loop over not just the zvol dataset itself,
but each of the zvol's snapshots as well, so that their device nodes
will be renamed as well. This results in dataset_kstats_create being
called for snapshots, where, as we've established, dk->dk_kstats is
NULL.
Fix this by simply adding a NULL check before doing anything in
dataset_kstats_rename.
This still allows the dataset_name kstat value for the zvol to be
updated (as was the intent of the original patch), and merely blocks
attempts by the code to act upon the zvol's non-kstat-having snapshots.
If at some future time, kstats are added for snapshots, then things
should work as intended in that case as well.
Signed-off-by: Justin Gottula <justin@jgottula.com> Reviewed-by: Rob Norris <robn@despairlabs.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Alan Somers <asomers@gmail.com> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Tony Hutter [Thu, 15 Aug 2024 21:00:18 +0000 (14:00 -0700)]
Linux 6.10 compat: fix rpm-kmod and builtin
The 6.10 kernel broke our rpm-kmod builds. The 6.10 kernel really
wants the source files in the same directory as the object files.
This workaround makes rpm-kmod work again. It also updates
the builtin kernel codepath to work correctly with 6.10.
See kernel commits:
b1992c3772e6 kbuild: use $(src) instead of $(srctree)/$(src) for source
directory 9a0ebe5011f4 kbuild: use $(obj)/ instead of $(src)/ for common pattern
rules
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #16439
Closes #16450
Ameer Hamza [Thu, 15 Aug 2024 19:39:44 +0000 (00:39 +0500)]
Fix incorrect error report on vdev attach/replace
Report the correct error message in libzfs when attaching/replacing a
vdev with a higher ashift.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #16449
Jitendra Patidar [Thu, 15 Aug 2024 00:59:19 +0000 (06:29 +0530)]
Fix projid accounting for xattr objects
zpool upgraded with 'feature@project_quota' needs re-layout of SA's
to fix the SA_ZPL_PROJID at SA_PROJID_OFFSET (128). Its necessary for
the correct accounting of object usage against its projid.
Old object (created before upgrade) when gets a projid assigned, its
SA gets re-layout via sa_add_projid(). If object has xattr dir, SA
of xattr dir also gets re-layout. But SA re-layout of xattr objects
inside a xattr dir is not done.
Fix zfs_setattr_dir() to re-layout SA's on xattr objects, when setting
projid on old xattr object (created before upgrade).
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Jitendra Patidar <jitendra.patidar@nutanix.com>
Closes #16355
Closes #16356
Paul Dagnelie [Wed, 14 Aug 2024 21:18:46 +0000 (14:18 -0700)]
Add missing kstats to dataset kstats
Reviewed-by: Tony Nguyen <tony.nguyen@delphix.com> Reviewed-by: Rob Norris <robn@despairlabs.com> Signed-off-by: Paul Dagnelie <pcd@delphix.com>
Closes #16431
Tony Hutter [Wed, 14 Aug 2024 19:27:07 +0000 (12:27 -0700)]
ZTS: Use /dev/urandom instead of /dev/random
Use /dev/urandom so we never have to wait on entropy.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #16442
Rob Norris [Tue, 30 Jul 2024 11:40:35 +0000 (21:40 +1000)]
Linux 6.11: enable queue flush through queue limits
In 6.11 struct queue_limits gains a 'features' field, where, among other
things, flush and write-cache are enabled. Detect it and use it.
Along the way, the blk_queue_set_write_cache() compat wrapper gets a
little cleanup. Since both flags are alway set together, its now a
single bool. Also the very very ancient version that sets q->flush_flags
directly couldn't actually turn it off, so I've fixed that. Not that we
use it, but still.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <robn@despairlabs.com> Sponsored-by: https://despairlabs.com/sponsor/
Closes #16400
Ameer Hamza [Fri, 9 Aug 2024 23:49:19 +0000 (04:49 +0500)]
Github workflow: fix typo in `zloop` artifact
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #16432
Alan Somers [Fri, 9 Aug 2024 21:32:59 +0000 (15:32 -0600)]
Make txg_wait_synced conditional in zfsvfs_teardown, for FreeBSD
This applies the same change in #9115 to FreeBSD. This was actually the
old behavior in FreeBSD 12; it only regressed when FreeBSD support was
added to OpenZFS. As far as I can tell, the timeline went like this:
* Illumos's zfsvfs_teardown used an unconditional txg_wait_synced
* Illumos added the dirty data check [^4]
* FreeBSD merged in Illumos's conditional check [^3]
* OpenZFS forked from Illumos
* OpenZFS removed the dirty data check in #7795 [^5]
* @mattmacy forked the OpenZFS repo and began to add FreeBSD support
* OpenZFS PR #9115[^1] recreated the same dirty data check that Illumos
used, in slightly different form. At this point the OpenZFS repo did
not yet have multi-OS support.
* Matt Macy merged in FreeBSD support in #8987[^2] , but it was based on
slightly outdated OpenZFS code.
In my local testing, this vastly improves the reboot speed of a server
with a large pool that has 1000 datasets and is resilvering an HDD.
Rob Norris [Fri, 9 Aug 2024 21:31:41 +0000 (07:31 +1000)]
zstream: remove duplicate highbit64 definition
When building a static build (--disable-shared), zstream fails to link
because of the duplicate highbit64() in libzpool/kernel.c. Since they're
identical, and the libzpool one is visible to zstream, we remove
zstream's copy and just use the common one.
Sponsored-by: https://despairlabs.com/sponsor/ Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <robn@despairlabs.com>
Closes #16426
Rob Norris [Fri, 9 Aug 2024 21:30:26 +0000 (07:30 +1000)]
abd: lift ABD zero scan from zio_compress_data() to abd_cmp_zero()
It's now the caller's responsibility do special handling for holes if
that's something it wants.
This also makes zio_compress_data() and zio_decompress_data() properly
the inverse of each other.
Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Jason Lee <jasonlee@lanl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16326
Brian Atkinson [Thu, 8 Aug 2024 22:39:25 +0000 (18:39 -0400)]
Updating bash completion build file
Commit 46ebd0a updated the build system to make symbolic link for zpool.
However, this commit did not update the automake file to also add the
symbolic link to the CLEANFILES variable. This is necessary so the link
is removed when running make clean/distclean.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Signed-off-by: Brian Atkinson <batkinson@lanl.gov>
Closes #16422
Alexander Motin [Thu, 8 Aug 2024 22:33:36 +0000 (18:33 -0400)]
Linux: Make zfs_prune() fair on NUMA systems
Previous code evicted nr_to_scan items from each NUMA node. This
not only multiplied the eviction by the number of nodes, but could
exhaust the smaller ones, evicting inodes used by acive workload
and requiring their immediate recreation. This patch spreads the
requested eviction between all NUMA nodes proportionally to their
evictable counts, which should be closer to expected LRU logic.
See kernel's super_cache_scan() as a similar logic example.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #16397
Alexander Motin [Thu, 8 Aug 2024 22:26:35 +0000 (18:26 -0400)]
Soften pruning threshold on not evictable metadata
Previous code pruned 10% of dnodes once 3/4 of metadata appeared
unevictable. On workloads with many millions of dnodes and little
other metadata it creates significant load spikes for many seconds
straight. This change instead gradually increases pruning as
unevictable metadata grow above the 3/4, which may allow it to
stabilize at some level.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #16401
Alexander Motin [Thu, 8 Aug 2024 22:25:10 +0000 (18:25 -0400)]
Improve zfs_blkptr_verify()
- Skip config lock enter/exit for embedded blocks. They have no
DVAs, so there is nothing to check under the lock.
- Skip CHECKSUM check and properly check PSIZE for embedded blocks.
- Add static branch predictions for unlikely conditions.
- Do not verify DVAs for blocks already in ARC. ARC hit already
"verified" the first (often the only) DVA, and it does not worth to
enter/exit config lock for nothing.
Some profiles show me up to 3% of CPU saving from this change.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Closes #16387
libzfs.h: Set ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN to ZAP_MAXVALUELEN
So far, the values of ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN were equal to
MAXPATHLEN, which is 1024 on FreeBSD and 4096 on Linux. This wasn't
ideal. Some of the surprising outcomes of this implementation are:
1. When creating a pool user property with zpool-set(8), libzfs makes
sure that the length of the property's value is less than
ZFS_MAXPROPLEN. However, the ZFS kernel module does not do that.
Instead, it checks the length against ZAP_MAXVALUELEN. As a result,
it is possible to create a property the length of which is going to
be larger than zpool(8) is ready to read.
2. A pool user property created on Linux is too big to be read on
FreeBSD.
This change sets both ZFS_MAXPROPLEN and ZPOOL_MAXPROPLEN to
ZAP_MAXVALUELEN, which is 8192 at the moment.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc.
Closes #16248
zpoolprops.7: Fix max length of name of user property
The documentation mentioned that the property name can be 256 characters
long. This was incorrect. The last byte is reserved for NUL, so the
name provided by the operator can be only 255 characters long.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Allan Jude <allan@klarasystems.com> Signed-off-by: Mateusz Piotrowski <0mp@FreeBSD.org> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc.
Closes #16248
Ameer Hamza [Thu, 8 Aug 2024 22:16:46 +0000 (03:16 +0500)]
Sync AUX label during pool import
Spare and l2cache vdev labels are not updated during import. Therefore,
if disk paths are updated between pool export and import, the AUX label
still shows the old paths. This patch syncs the AUX label
during import to show the correct path information.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Umer Saleem <usaleem@ixsystems.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Signed-off-by: Ameer Hamza <ahamza@ixsystems.com>
Closes #15817
Mark Johnston [Mon, 5 Aug 2024 15:57:44 +0000 (15:57 +0000)]
ZTS: Add a test to verify that copy_file_range obeys RLIMIT_FSIZE
Signed-off-by: Mark Johnston <markj@FreeBSD.org> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Mark Johnston [Tue, 23 Jul 2024 14:20:46 +0000 (10:20 -0400)]
FreeBSD: Fix RLIMIT_FSIZE handling for block cloning
ZFS implements copy_file_range(2) using block cloning when possible.
This implementation must respect the RLIMIT_FSIZE limit.
zfs_clone_range() already checks the limit, so it is safe to remove this
check in zfs_freebsd_copy_file_range(). Moreover, the removed check
produces false positives: the length passed to copy_file_range(2) may be
larger than the input file size; as the man page notes, "for best
performance, call copy_file_range() with the largest len value
possible." In particular, some existing code passes SSIZE_MAX there.
The check in zfs_clone_range() clamps the length to the input file's
size before checking, but the removed check uses the caller supplied
length, so something like
fails because FreeBSD's cat(1) uses copy_file_range(2) in the manner
described above.
Reported-by: Philip Paeps <philip@FreeBSD.org> Signed-off-by: Mark Johnston <markj@FreeBSD.org> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
Alan Somers [Wed, 7 Aug 2024 20:44:55 +0000 (14:44 -0600)]
Fix memory corruption during parallel zpool import with -o cachefile (#16419)
When importing multiple pools, the nvlist of properties given with "-o"
is shared amongst the several threads. So no thread should modify it.
Previously, in the course of validating the cachefile property, the
zpool_valid_proplist function would temporarily modify the value, and
then change it back. Now it will operate on a clone of the value.
Sponsored by: Axcient
Fixes #16405 Signed-off-by: Alan Somers <asomers@gmail.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Allan Jude <allan@klarasystems.com> Reviewed-by: George Wilson <gwilson@delphix.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org>
Tino Reichardt [Wed, 7 Aug 2024 16:52:37 +0000 (18:52 +0200)]
ZTS: small fix for SEEK_DATA/SEEK_HOLE tests (#16413)
Some libc's like uClibc lag the proper definition of SEEK_DATA
and SEEK_HOLE. Since we have only two files in ZTS which use
these definitons, let's define them by hand:
There should be no failures, because:
- FreeBSD has support for SEEK_DATA/SEEK_HOLE since FreeBSD 8
- Linux has it since Linux 3.1
- the libc will submit the parameters unchanged to the kernel
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Allan Jude [Tue, 6 Aug 2024 23:36:55 +0000 (19:36 -0400)]
Fix the names of some FreeBSD sysctls in include/tunables.cfg (#16395)
Sponsored-by: Klara, Inc. Signed-off-by: Allan Jude <allan@klarasystems.com> Reviewed-by: Alexander Motin <mav@FreeBSD.org> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Umer Saleem [Thu, 9 May 2024 11:54:47 +0000 (16:54 +0500)]
JSON output support for zpool status
This commit adds support for zpool status command to displpay status
of ZFS pools in JSON format using '-j' option. Status information is
collected in nvlist which is later dumped on stdout in JSON format.
Existing options for zpool status work with '-j' flag. man page for
zpool status is updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for zpool list command to output the list of
ZFS pools in JSON format using '-j' option.. Information about available
pools is collected in nvlist which is later printed to stdout in JSON
format.
Existing options for zfs list command work with '-j' flag. man page for
zpool list is updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for zpool get command to output the list of
properties for ZFS Pools and VDEVS in JSON format using '-j' option.
Man page for zpool get is updated to include '-j' option.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for zpool version to output in JSON format
using '-j' option. Userland kernel module version is collected in nvlist
which is later displayed in JSON format. man page for zpool is updated.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for zfs mount to display mounted file systems
in JSON format using '-j' option. Data is collected in nvlist which is
printed in JSON format. man page for zfs mount is updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for JSON output for zfs list using '-j' option.
Information is collected in JSON format which is later printed in jSON
format. Existing options for zfs list also work with '-j'. man pages are
updated with relevant information.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
This commit adds support for JSON output for zfs version and zfs get
commands. '-j' flag can be used to get output in JSON format.
Information is collected in nvlist objects which is later printed in
JSON format. Existing options that work for zfs get and zfs version
also work with '-j' flag.
man pages for zfs get and zfs version are updated accordingly.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Signed-off-by: Umer Saleem <usaleem@ixsystems.com>
Closes #16217
Rob Norris [Thu, 18 Jul 2024 09:53:35 +0000 (19:53 +1000)]
ZTS: remove skips for zvol_misc tests
Last commit should fix the underlying problem, so these should be
passing reliably again.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16364
Rob Norris [Thu, 18 Jul 2024 03:24:05 +0000 (13:24 +1000)]
zvol: ensure device minors are properly cleaned up
Currently, if a minor is in use when we try to remove it, we'll skip it
and never come back to it again. Since the zvol state is hung off the
minor in the kernel, this can get us into weird situations if something
tries to use it after the removal fails. It's even worse at pool export,
as there's now a vestigial zvol state with no pool under it. It's
weirder again if the pool is subsequently reimported, as the zvol code
(reasonably) assumes the zvol state has been properly setup, when it's
actually left over from the previous import of the pool.
This commit attempts to tackle that by setting a flag on the zvol if its
minor can't be removed, and then checking that flag when a request is
made and rejecting it, thus stopping new work coming in.
The flag also causes a condvar to be signaled when the last client
finishes. For the case where a single minor is being removed (eg
changing volmode), it will wait for this signal before proceeding.
Meanwhile, when removing all minors, a background task is created for
each minor that couldn't be removed on the spot, and those tasks then
wake and clean up.
Since any new tasks are queued on to the pool's spa_zvol_taskq,
spa_export_common() will continue to wait at export until all minors are
removed.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #14872
Closes #16364
Rob Norris [Thu, 18 Jul 2024 03:13:44 +0000 (13:13 +1000)]
linux/zvol_os: fix SET_ERROR with negative return codes
SET_ERROR is our facility for tracking errors internally. The negation
is to match the what the kernel expects from us. Thus, the negation
should happen outside of the SET_ERROR.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16364
Rob Norris [Thu, 18 Jul 2024 02:37:43 +0000 (12:37 +1000)]
zvol_impl: document and tidy flags
ZVOL_DUMPIFIED is a vestigial Solaris leftover, and not used anywhere.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Sponsored-by: Klara, Inc. Sponsored-by: Wasabi Technology, Inc. Signed-off-by: Rob Norris <rob.norris@klarasystems.com>
Closes #16364
Tino Reichardt [Mon, 5 Aug 2024 23:17:23 +0000 (01:17 +0200)]
ZTS: fix history_007_pos test on Ubuntu 24.04 (#16410)
The timezone "US/Mountain" isn't supported on newer linux versions.
Using the correct timezone "America/Denver" like it's done in FreeBSD
will fix this. Older Linux distros should behave also okay with this.
Signed-off-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru>
Shengqi Chen [Mon, 5 Aug 2024 16:44:10 +0000 (00:44 +0800)]
contrib: link zpool to zfs in bash-completion (#16376)
Currently user won't have completion of `zpool` command until they
trigger completion of `zfs` first. This patch adds a link to `zfs`,
thus user can use both to initialize the completion.
Fixes: #16320 Signed-off-by: Shengqi Chen <harry-chen@outlook.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Rob Norris <rob.norris@klarasystems.com> Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de>
Alexander Motin [Thu, 1 Aug 2024 19:27:29 +0000 (15:27 -0400)]
Once more refactor arc_summary output
Before this arc_summary was not reporting any information about
evictable ARC memory. As result I've found difficult to analyze
behavior of dnode-heavy workload with lots of unevictable buffers.
This change adds evictable sizes into states breakdown section.
While there, add/refactor sections for global memory statistics,
for ARC breakdown between different structures, for data/metadata.
Add information about memory reclamation requests.
While there, refactor and polish graph mode, neglected for a while.
Signed-off-by: Alexander Motin <mav@FreeBSD.org>
Sponsored by: iXsystems, Inc.
Reviewed-by: Tino Reichardt <milky-zfs@mcmilk.de> Reviewed-by: Umer Saleem <usaleem@ixsystems.com> Reviewed-by: Ameer Hamza <ahamza@ixsystems.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov>
projects / mirror_zfs.git / log