Christer Ekholm [Mon, 16 May 2016 19:29:54 +0000 (21:29 +0200)]
Make zpool list -vp print individual vdev sizes parsable.
Add argument format to print_one_column(), and use it to call
zfs_nicenum_format with, instead of just zfs_nicenum. Don't print "%"
for fragmentation or capacity percent values.
The calls to print_one_colum is made with ZFS_NICENUM_RAW if
cb->cb_literal (zpool list called with -p), and ZFS_NICENUM_1024 if not.
Also zpool_get_prop is modified to don't add "%" or "x" if literal.
Signed-off-by: Christer Ekholm <che@chrekh.se> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov
Closes #4657
Brian Behlendorf [Tue, 17 May 2016 22:31:03 +0000 (15:31 -0700)]
Remove additional cruft from manpages
These changes should have been part of the original 930b0d4
commit but were overlooked because 193a37c had not yet been
merged when the original change was ported.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4631
Marcel Huber [Wed, 11 May 2016 19:23:42 +0000 (21:23 +0200)]
Fixes subtle bug in zio_handle_io_delay()
Fixed bug introduced in commit #c35b1882. Hinted by gcc:
zio_inject.c: In function ‘zio_handle_io_delay’:
zio_inject.c:382:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (handler->zi_record.zi_freq != 0 &&
^~
zio_inject.c:384:4: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the ‘if’
continue;
^~~~~~~~
The zfs range lock interface no longer tightly depends on a
znode_t and therefore can be used in ztest. This allows the
previous ztest specific implementation to be removed, and for
additional test coverage of the shared version.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4023
Issue #4024
struct zvol_state contains a dummy znode, which is around 1KB on x64,
only for zfs_range_lock. But in reality, other than z_range_lock and
z_range_avl, zfs_range_lock only need znode on regular file, which
means we add 1KB on a structure and gain nothing.
In this patch, we remove the dummy znode for zvol_state. In order to
do that, we also need to refactor zfs_range_lock a bit. We move
z_range_lock and z_range_avl pair out of znode_t to form zfs_rlock_t.
This new struct replaces znode_t as the main handle inside the range
lock functions.
We also add pointers to z_size, z_blksz, and z_max_blksz so range lock
code doesn't depend on znode_t. This allows non-ZPL consumers like
Lustre to use the range locks with their equivalent znode_t structure.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Boris Protopopov <boris.protopopov@actifio.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4510
Richard Laager [Wed, 11 May 2016 19:16:21 +0000 (14:16 -0500)]
Illumos 1502 Remove conversion cruft from manpages
Reviewed by: Alexander Eremin <alexander.eremin@nexenta.com>
Reviewed by: Gordon Ross <gordon.w.ross@gmail.com>
Reviewed by: Garrett D'Amore <garrett.damore@gmail.com>
References:
https://www.illumos.org/issues/1502
Ported-by: Richard Laager <rlaager@wiktel.com> Signed-off-by: Richard Laager <rlaager@wiktel.com>
Conflicts:
man/man8/zpool.8
Userland version of cv_timedwait_hires() always assumes absolute time.
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Denys Rtveliashvili <denys@rtveliashvili.name> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6739
OpenZFS-commit: https://github.com/illumos/illumos-gate/commit/41c6413
Porting Notes:
The ported change has revealed a number of problems in the Linux-specific code,
as it was expecting incorrect return codes from pthread_* functions.
Reviewed and improved the usage of pthread_* function in lib/libzpool/kernel.c.
Chunwei Chen [Wed, 11 May 2016 23:55:48 +0000 (16:55 -0700)]
Use cv_timedwait_sig_hires in arc_reclaim_thread
The was originally using interruptible cv_timedwait_sig, but was changed
to uninterruptible cv_timedwait_hires in ae6d0c6. Use _sig_hires instead
to allow interruptible sleep.
- In older systems without sysroot.mount, import before dracut-mount,
and re-enable old dracut mount hook
- rootflags MUST be present even if the administrator neglected to
specify it explicitly
- Check that mount.zfs exists in sbindir
- Remove awk and head as (now unused) requirements, add grep, and
install the right mount.zfs
- Eliminate one use of grep in Dracut
- Use a more accurate grepping statement to identify zfsutil in rootflags
- Ensure that pooldev is nonempty
- Properly handle /dev/sd* devices and more
- Use new -P to get list of zpool devices
- Bail out of the generator when zfs:AUTO is on the root command line
- Ignore errors from systemctl trying to load sysroot.mount, we only
care about the output
- Determine which one is the correct initqueuedir at run time.
- Add a compatibility getargbool for our detection / setup script.
- Update dracut .gitignore files
Dan McDonald [Wed, 11 May 2016 19:03:51 +0000 (12:03 -0700)]
OpenZFS 6093 - zfsctl_shares_lookup
6093 zfsctl_shares_lookup should only VN_RELE() on zfs_zget() success
Reviewed by: Gordon Ross <gwr@nexenta.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6093
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/0f92170
Closes #4630
This function was always implemented slightly differently under Linux
and therefore never suffered from this issue. The patch has been
updated and applied as cleanup in order to minimize differences with
the upstream OpenZFS code.
Brian Behlendorf [Thu, 12 May 2016 20:31:55 +0000 (13:31 -0700)]
Revert "Kill znode->z_gen field"
This reverts commit 4cd77889b684fd0dd1a0a995b692dda3db76a9ac. The
i_generation field in the inode is 32-bit and the SA code expects
64-bit fixed values. Revert this optimization for now until
this is cleanly addressed.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4538
Tony Hutter [Mon, 29 Feb 2016 18:05:23 +0000 (10:05 -0800)]
Add -lhHpw options to "zpool iostat" for avg latency, histograms, & queues
Update the zfs module to collect statistics on average latencies, queue sizes,
and keep an internal histogram of all IO latencies. Along with this, update
"zpool iostat" with some new options to print out the stats:
Marcel Huber [Wed, 11 May 2016 19:28:33 +0000 (21:28 +0200)]
Fixes bug in fix_paths()
Fixes bug introduced in commit 7d90f569a. Hinted by gcc:
libzfs_import.c: In function ‘fix_paths’:
libzfs_import.c:602:28: warning: self-comparison always evaluates to true [-Wtautological-compare]
if (best->ne_num_labels == best->ne_num_labels &&
Nikolay Borisov [Mon, 9 May 2016 19:15:30 +0000 (22:15 +0300)]
Reduce stack usage of dmu_recv_stream function
The receive_writer_arg and receive_arg structures become large
when ZFS is compiled with debugging enabled. This results in
gcc throwing an error about excessive stack usage:
module/zfs/dmu_send.c: In function ‘dmu_recv_stream’:
module/zfs/dmu_send.c:2502:1: error: the frame size of 1256 bytes is
larger than 1024 bytes [-Werror=frame-larger-than=]
Fix this by allocating those functions on the heap, rather than
on the stack.
With patch: dmu_send.c:2350:1:dmu_recv_stream 240 static
Without patch: dmu_send.c:2350:1:dmu_recv_stream 1336 static
Signed-off-by: Nikolay Borisov <n.borisov.lkml@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4620
Adam Stevko [Mon, 9 May 2016 21:03:18 +0000 (14:03 -0700)]
OpenZFS 3993, 4700
3993 zpool(1M) and zfs(1M) should support -p for "list" and "get"
4700 "zpool get" doesn't support -H or -o options
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Ported by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/3993
OpenZFS-issue: https://www.illumos.org/issues/4700
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c58b352
Porting notes:
I removed ZoL's zpool_get_prop_literal() in favor of
zpool_get_prop(..., boolean_t literal) since that's what OpenZFS
uses. The functionality is the same.
Add a script designed to facilitate in-tree development and testing
by installing symlinks on your system which refer to in-tree helper
utilities. These helper utilities must be installed to in order to
exercise all ZFS functionality. By using symbolic links and keeping
the scripts in-tree during development they can be easily modified
and those changes tracked.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #4607
Chunwei Chen [Fri, 25 Mar 2016 19:21:56 +0000 (15:21 -0400)]
OpenZFS 6842 - Fix empty xattr dir causing lockup
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Denys Rtveliashvili <denys@rtveliashvili.name> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
An initial version of this patch was applied in commit 29572cc and
subsequently refined upstream. Since the implementations do not
conflict with each other both are left applied for now.
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com> Ported-by: Denys Rtveliashvili <denys@rtveliashvili.name> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
lzc_destroy_snaps() returns an nvlist in errlist.
zfs_destroy_snaps_nvl() should nvlist_free() it before returning.
Authored by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com> Ported-by: Denys Rtveliashvili <denys@rtveliashvili.name> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Incorrect endianness swap for drr_spill.drr_length in libzfs_sendrecv.c
Instead of drr_write.drr_length, we should be assigning the result of
the byteswap to drr_spill.drr_length.
Commit e0ab3ab introduced two blocks of code which are only needed
when debugging is enabled. These blocks should be wrapped with
ZFS_DEBUG for clarity and to prevent unused variable warnings in
a production build.
Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4515
Commit e0ab3ab introduced new per-vdev ZAP tests which should have
used the $ZPOOL and $ZDB variabled. The tests passed the automated
testing since both utilities but when running in-tree all of the new
tests fail.
Signed-off-by: Don Brady <don.brady@intel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4515
OpenZFS 6286 - ZFS internal error when set large block on bootfs
6286 ZFS internal error when set large block on bootfs
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Andriy Gapon <avg@FreeBSD.org>
Approved by: Robert Mustacchi <rm@joyent.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6286
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6de9bb5
Closes #4585
Tony Hutter [Thu, 5 May 2016 16:30:05 +0000 (09:30 -0700)]
OpenZFS 6544 - incorrect comment in libzfs.h about offline status
6544 incorrect comment in libzfs.h about offline status
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/6544
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/cb605c4
Closes #4595
5669 altroot not set in zpool create when specified with -o
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/5669
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c423721
Closes #4594
Joe Stein [Mon, 11 Apr 2016 20:16:57 +0000 (16:16 -0400)]
OpenZFS 6736 - ZFS per-vdev ZAPs
6736 ZFS per-vdev ZAPs
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Don Brady <don.brady@intel.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Tim Chase [Mon, 2 May 2016 17:00:50 +0000 (12:00 -0500)]
Enable PF_FSTRANS for ioctl secpolicy callbacks (#4571)
At the very least, the zfs_secpolicy_write_perms ioctl security policy
callback, which calls dsl_dataset_hold(), can require freeing memory and,
therefore, re-enter ZFS. This patch enables PF_FSTRANS for all of the
security policy callbacks similarly to the manner in which it's enabled
for the actual ioctl callback.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4554
Brian Behlendorf [Sat, 30 Apr 2016 19:21:51 +0000 (12:21 -0700)]
Fix user namespaces uid/gid mapping
As described in torvalds/linux@5f3a4a2 the &init_user_ns, and
not the current user_ns, should be passed to posix_acl_from_xattr()
and posix_acl_to_xattr(). Conveniently the init_user_ns is
available through the init credential (kcred).
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Massimo Maggi <me@massimo-maggi.eu>
Closes #4177
Brian Behlendorf [Wed, 27 Apr 2016 00:24:41 +0000 (17:24 -0700)]
Add support for libtirpc
While OpenSolaris libc and glibc both include XDR support, the musl libc
does not in favor of depending on the BSD-licensed libtirpc library.
Adding support is a simple matter of detecting the library, including
the headers and linking against it. By default libtirpc will be checked
for and if available used. Otherwise, configure will fall back to using
the xdr implementation provided by libc if available. The options
--with-tirpc/--without-tirpc can be used to disable this checking.
In addition, the xdr_control() function has been simplied to only
handle ZFSs specific use case.
Original-patch-by: stf <s@ctrlc.hu> Original-patch-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Signed-off-by: Carlo Landmeter <clandmeter@gmail.com>
Closes #2254
Closes #4559
Alex Reece [Thu, 21 Apr 2016 18:23:37 +0000 (11:23 -0700)]
Illumos 6844 - dnode_next_offset can detect fictional holes
6844 dnode_next_offset can detect fictional holes
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
dnode_next_offset is used in a variety of places to iterate over the
holes or allocated blocks in a dnode. It operates under the premise that
it can iterate over the blockpointers of a dnode in open context while
holding only the dn_struct_rwlock as reader. Unfortunately, this premise
does not hold.
When we create the zio for a dbuf, we pass in the actual block pointer
in the indirect block above that dbuf. When we later zero the bp in
zio_write_compress, we are directly modifying the bp. The state of the
bp is now inconsistent from the perspective of dnode_next_offset: the bp
will appear to be a hole until zio_dva_allocate finally finishes filling
it in. In the meantime, dnode_next_offset can detect a hole in the dnode
when none exists.
I was able to experimentally demonstrate this behavior with the
following setup:
1. Create a file with 1 million dbufs.
2. Create a thread that randomly dirties L2 blocks by writing to the
first L0 block under them.
3. Observe dnode_next_offset, waiting for it to skip over a hole in the
middle of a file.
4. Do dnode_next_offset in a loop until we skip over such a non-existent
hole.
The fix is to ensure that it is valid to iterate over the indirect
blocks in a dnode while holding the dn_struct_rwlock by passing the zio
a copy of the BP and updating the actual BP in dbuf_write_ready while
holding the lock.
6659 nvlist_free(NULL) is a no-op
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Marcel Telka <marcel@telka.sk>
Approved by: Robert Mustacchi <rm@joyent.com>
Brian Behlendorf [Wed, 20 Apr 2016 17:17:01 +0000 (10:17 -0700)]
Fix 'zpool import' blkid device names
When importing a pool using the blkid cache only the device
node path was added to the list of known paths for a device.
This results in 'zpool import' always using the sdX names
in preference to the 'path' name stored in the label.
To fix the issue the blkid import path has been updated to
add both the 'path', 'devid', and 'devname' names from the
label to the known paths. A sanity check is done to ensure
these paths do refer to the same device identified by blkid.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4523
Closes #3043
Brian Behlendorf [Wed, 20 Apr 2016 18:39:15 +0000 (11:39 -0700)]
Disable efi_debug in --enable-debug builds
Disable the additional EFI debugging in all builds. Some users
run debug builds in production and the extra log messages can
cause confusion. Beyond that the log messages are rarely useful.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #4523
Brian Behlendorf [Tue, 19 Apr 2016 18:19:12 +0000 (11:19 -0700)]
Use udev for partition detection
When ZFS partitions a block device it must wait for udev to create
both a device node and all the device symlinks. This process takes
a variable length of time and depends on factors such how many links
must be created, the complexity of the rules, etc. Complicating
the situation further it is not uncommon for udev to create and
then remove a link multiple times while processing the udev rules.
Given the above, the existing scheme of waiting for an expected
partition to appear by name isn't 100% reliable. At this point
udev may still remove and recreate think link resulting in the
kernel modules being unable to open the device.
In order to address this the zpool_label_disk_wait() function
has been updated to use libudev. Until the registered system
device acknowledges that it in fully initialized the function
will wait. Once fully initialized all device links are checked
and allowed to settle for 50ms. This makes it far more likely
that all the device nodes will exist when the kernel modules
need to open them.
For systems without libudev an alternate zpool_label_disk_wait()
was updated to include a settle time. In addition, the kernel
modules were updated to include retry logic for this ENOENT case.
Due to the improved checks in the utilities it is unlikely this
logic will be invoked. However, if the rare event it is needed
it will prevent a failure.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #4523
Closes #3708
Closes #4077
Closes #4144
Closes #4214
Closes #4517
Brian Behlendorf [Wed, 13 Apr 2016 21:50:16 +0000 (14:50 -0700)]
Create unique partition labels
When partitioning a device a name may be specified for each partition.
Internally zfs doesn't use this partition name for anything so it
has always just been set to "zfs".
However this isn't optimal because udev will create symlinks using
this name in /dev/disk/by-partlabel/. If the name isn't unique
then all the links cannot be created.
Therefore a random 64-bit value has been added to the partition
label, i.e "zfs-1234567890abcdef". Additional information could
be encoded here but since partitions may be reused that might
result in confusion and it was decided against.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Richard Laager <rlaager@wiktel.com>
Closes #4517
Matthew Thode [Wed, 30 Mar 2016 23:59:15 +0000 (18:59 -0500)]
fix booting via dracut generated initramfs
Dracut and Systemd updated how they integrate with each other, because
of this our current integrations stopped working (around the time
4.1.13 came out). This patch addresses that issue and gets us booting
again.
Thanks to @Rudd-O for doing the work to get dracut working again and
letting me submit this on his behalf.
Signed-off-by: Manuel Amador (Rudd-O) <rudd-o@rudd-o.com> Signed-off-by: Matthew Thode <mthode@mthode.org>
Closes #3605
Closes #4478
Linux 4.5 added member "name" to xattr_handler. xattr_handler which matches to
whole name rather than prefix should use "name" instead of "prefix".
Otherwise, kernel will return with EINVAL when it tries to resolve handlers.
Also, we remove the strcmp checks when xattr_handler has name, because
xattr_resolve_name will do the check for us.
Brian Behlendorf [Wed, 13 Apr 2016 15:55:35 +0000 (08:55 -0700)]
Add pn_alloc()/pn_free() functions
In order to remove the HAVE_PN_UTILS wrappers the pn_alloc() and
pn_free() functions must be implemented. The existing illumos
implementation were used for this purpose.
The `flags` argument which was used in places wrapped by the
HAVE_PN_UTILS condition has beed added back to zfs_remove() and
zfs_link() functions. This removes a small point of divergence
between the ZoL code and upstream.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4522
Nikolay Borisov [Wed, 13 Apr 2016 06:40:42 +0000 (09:40 +0300)]
Rework zpool import excluded devices check
Current zpool import code skips directory entries which have prefixes
similar to some system files on linux such as "fd", "core" etc. However,
this means one cannot have one's zpools hosted inside files which are named
e.g. core-1 or lp. Furthermore, apart from the string checks there is already
which makes the zpool_open_func work only with regular files and block devices.
To fix this problem remove most of the checks since they are redundant but
leave the checks for the 'hpet' and 'watchdog' names. Furthermore, change
the checks to strcmp which albeit less safe than strncmp allows to have
devices whose names are prefixed by 'hpet' or 'watchdog'.
Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4438
Ned Bass [Fri, 15 Apr 2016 18:55:03 +0000 (18:55 +0000)]
Fix ZPL miswrite of default POSIX ACL
Commit 4967a3e introduced a typo that caused the ZPL to store the
intended default ACL as an access ACL. Due to caching this problem
may not become visible until the filesystem is remounted or the inode
is evicted from the cache. Fix the typo and add a regression test.
Signed-off-by: Ned Bass <bass6@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #4520
Colin Ian King [Thu, 14 Apr 2016 07:58:09 +0000 (08:58 +0100)]
Fix inverted logic on none elevator comparison
Commit d1d7e2689db9e03f1 ("cstyle: Resolve C style issues") inverted
the logic on the none elevator comparison. Fix this and make it
cstyle warning clean.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4507
In replacement test, it spawns a process to truncate a file background
and make sure that the process exists 1 second later. However, the
process may have finished its work and exited therefore it has the
chance to report a false alarm.
This patch just removed those sanity check.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4516
When ZFS is installed by 'make install', programs will be installed
into '/usr/local'. ZFS test scripts can't locate programs 'zpool'
that caused tests failure.
Fix typo in help message.
Add sanity check to for ksh and generate a useful error message.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4495
Add atime_003_pos to test relatime=on, we do check_atime_updated twice, the
first time should success and the second time should fail. We also modify
atime_001_pos to do check_atime_updated twice and both times should succeed.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4482
Chunwei Chen [Thu, 31 Mar 2016 23:52:03 +0000 (16:52 -0700)]
Enable lazytime semantic for atime
Linux 4.0 introduces lazytime. The idea is that when we update the atime, we
delay writing it to disk for as long as it is reasonably possible.
When lazytime is enabled, dirty_inode will be called with only I_DIRTY_TIME
flag whenever i_atime is updated. So under such condition, we will set
z_atime_dirty. We will only write it to disk if file is closed, inode is
evicted or setattr is called. Ideally, we should also write it whenever SA
is going to be updated, but it is left for future improvement.
There's one thing that we should take care of now that we allow i_atime to be
dirty. In original implementation, whenever SA is modified, zfs_inode_update
will be called to overwrite every thing in inode. This will cause dirty
i_atime to be discarded. We fix this by don't overwrite i_atime in
zfs_inode_update. We only overwrite i_atime when allocating new inode or doing
zfs_rezget with zfs_inode_update_new.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
Chunwei Chen [Wed, 30 Mar 2016 00:53:34 +0000 (17:53 -0700)]
Fix atime handling and relatime
The problem for atime:
We have 3 places for atime: inode->i_atime, znode->z_atime and SA. And its
handling is a mess. A huge part of mess regarding atime comes from
zfs_tstamp_update_setup, zfs_inode_update, and zfs_getattr, which behave
inconsistently with those three values.
zfs_tstamp_update_setup clears z_atime_dirty unconditionally as long as you
don't pass ATTR_ATIME. Which means every write(2) operation which only updates
ctime and mtime will cause atime changes to not be written to disk.
Also zfs_inode_update from write(2) will replace inode->i_atime with what's
inside SA(stale). But doesn't touch z_atime. So after read(2) and write(2).
You'll have i_atime(stale), z_atime(new), SA(stale) and z_atime_dirty=0.
Now, if you do stat(2), zfs_getattr will actually replace i_atime with what's
inside, z_atime. So you will have now you'll have i_atime(new), z_atime(new),
SA(stale) and z_atime_dirty=0. These will all gone after umount. And you'll
leave with a stale atime.
The problem for relatime:
We do have a relatime config inside ZFS dataset, but how it should interact
with the mount flag MS_RELATIME is not well defined. It seems it wanted
relatime mount option to override the dataset config by showing it as
temporary in `zfs get`. But at the same time, `zfs set relatime=on|off` would
also seems to want to override the mount option. Not to mention that
MS_RELATIME flag is actually never passed into ZFS, so it never really worked.
How Linux handles atime:
The Linux kernel actually handles atime completely in VFS, except for writing
it to disk. So if we remove the atime handling in ZFS, things would just work,
no matter it's strictatime, relatime, noatime, or even O_NOATIME. And whenever
VFS updates the i_atime, it will notify the underlying filesystem via
sb->dirty_inode().
And also there's one thing to note about atime flags like MS_RELATIME and
other flags like MS_NODEV, etc. They are mount point flags rather than
filesystem(sb) flags. Since native linux filesystem can be mounted at multiple
places at the same time, they can all have different atime settings. So these
flags are never passed down to filesystem drivers.
What this patch tries to do:
We remove znode->z_atime, since we won't gain anything from it. We remove most
of the atime handling and leave it to VFS. The only thing we do with atime is
to write it when dirty_inode() or setattr() is called. We also add
file_accessed() in zpl_read() since it's not provided in vfs_read().
After this patch, only the MS_RELATIME flag will have effect. The setting in
dataset won't do anything. We will make zfstuil to mount ZFS with MS_RELATIME
set according to the setting in dataset in future patch.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4482
As described in torvalds/linux@4a2d057e the macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were originally introduced
to make it possible to add bigger chunks to the page cache. This
never panned out and it has therefore been removed from the kernel.
ZFS has been updated to use the PAGE_{SIZE,SHIFT,MASK,ALIGN} macros
and calls to page_cache_release() have been replaced with put_page().
There was no need to introduce a configure check for this because
these interfaces have existed for a very long time.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <tuxoko@gmail.com>
Closes #4489
Accidentally introduced by commit e4023e4. The AM_CONDITIONAL
cannot be located where it can be invoked conditionally, as in
the `--with-config=user` case. Relocate it to the top level
ZFS_AC_CONFIG macro along with the other AM_CONDITIONALs.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4416
Colin Ian King [Wed, 30 Mar 2016 22:00:23 +0000 (23:00 +0100)]
Add support 32 bit FS_IOC32_{GET|SET}FLAGS compat ioctls
We need 32 bit userspace FS_IOC32_GETFLAGS and FS_IOC32_SETFLAGS
compat ioctls for systems such as powerpc64. We use the normal
compat ioctl idiom as used by a variety of file systems to provide
this support.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4477
Brian Behlendorf [Thu, 31 Mar 2016 21:50:16 +0000 (14:50 -0700)]
Only build devname2devid when libudev headers are available
Accidentally introduced by commit 39fc0cb. The devname2devid utility
which depends on libudev must only be built when libudev headers are
available. This is accomplished through an AM_CONDITIONAL.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #4416
Don Brady [Mon, 14 Mar 2016 16:04:21 +0000 (10:04 -0600)]
Add support for devid and phys_path keys in vdev disk labels
This is foundational work for ZED.
Updates a leaf vdev's persistent device strings on Linux platform
* only applies for a dedicated leaf vdev (aka whole disk)
* updated during pool create|add|attach|import
* used for matching device matching during auto-{online,expand,replace}
* stored in a leaf disk config label (i.e. alongside 'path' NVP)
* can opt-out using env var ZFS_VDEV_DEVID_OPT_OUT=YES
Andriy Gapon [Fri, 25 Mar 2016 14:29:35 +0000 (16:29 +0200)]
Expand EDQUOT variable
Results in failures with ksh version 93v- 2014-06-25. This appears
to not be an issue with ksh version 93u+ 2012-08-01. The expanded
versions works correctly for both.
Signed-off-by: Andriy Gapon <andriy.gapon@clusterhq.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4452
The `zfs userspace` squashes all entries with unresolved numeric
values into a single output entry due to the comparsion always
made by the string name which is empty in case of unresolved IDs.
Fix this by falling to a numerical comparison when either one
of string values is not found. This then compares any numerical
values after all with a name resolved.
Signed-off-by: Pavel Boldin <boldin.pavel@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4440
Effectively provide our own version of assert()/verify() for use
in user space. This minimizes our dependencies and aligns the
user space assertion handling with what's used in the kernel.
Signed-off-by: Carlo Landmeter <clandmeter@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4449
DHE [Sun, 27 Mar 2016 19:58:27 +0000 (15:58 -0400)]
gcc build error: -Wbool-compare in metaslab.c
When debugging is enabled on a very recent version of gcc
(tested with 5.3.0), DVA_SET_GANG(dva, !!(flags)) fails
because an assertion causes a comparison between what is
technically a boolean and an integer.
Signed-off-by: DHE <git@dehacked.net> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4465
Brian Behlendorf [Sat, 26 Mar 2016 21:17:26 +0000 (14:17 -0700)]
Fix zpool_scrub_* test cases
The zpool_scrub_002, zpool_scrub_003, zpool_scrub_004 test cases fail
reliably when running against small pools or fast storage. This
occurs because the scrub/resilver operation completes before subsequent
commands can be run.
A one second delay has been added to 10% of zio's in order to ensure
the scrub/resilver operation will run for at least several seconds.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4450
Brian Behlendorf [Fri, 25 Mar 2016 19:40:58 +0000 (12:40 -0700)]
zloop.sh requires bash
The zloop.sh script requires bash. It will require further improvements
to be compatible with the alternatives such as dash. This resolves the
ztest failures observed under Ubuntu in the automated tested.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #4441
Brian Behlendorf [Wed, 23 Mar 2016 01:08:59 +0000 (18:08 -0700)]
Add zloop.sh test script
Add Chris Williamson's "new" zloop script so that it may be
intergated with ZoLs automated testing. The original script may
be found in the openzfs-build repository on Github.
Minor modifications were made to the script so it can be run
directly from the ZoL source tree or from installed packages.
Additionally it was updated to use gdb instead of mdb to
extact debugging information from a core dump.
Brian Behlendorf [Thu, 17 Mar 2016 22:32:33 +0000 (15:32 -0700)]
Fix zdb -e and zhack thread_init()
This issue was caused by calling `thread_init()` and `thread_fini()`
multiple times resulting in `kthread_key` being invalid. To resolve
the issue the explicit calls to `thread_init()` and `thread_fini()`
required by the `zpool` command have been moved in to the command.
Consumers such as `zdb` and `zhack` perform the same initialized
through `kernel_init()` and `kernel_fini()`.
Resolving this issue allows multiple additional test cases to
be enabled.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Signed-off-by: Chunwei Chen <tuxoko@gmail.com> Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #4331
Gvozden Neskovic [Mon, 29 Feb 2016 18:42:27 +0000 (19:42 +0100)]
Support for vectorized algorithms on x86
This is initial support for x86 vectorized implementations of ZFS parity
and checksum algorithms.
For the compilation phase, configure step checks if toolchain supports relevant
instruction sets. Each implementation must ensure that the code is not passed
to compiler if relevant instruction set is not supported. For this purpose,
following new defines are provided if instruction set is supported:
- HAVE_SSE,
- HAVE_SSE2,
- HAVE_SSE3,
- HAVE_SSSE3,
- HAVE_SSE4_1,
- HAVE_SSE4_2,
- HAVE_AVX,
- HAVE_AVX2.
For detecting if an instruction set can be used in runtime, following functions
are provided in (include/linux/simd_x86.h):
- zfs_sse_available()
- zfs_sse2_available()
- zfs_sse3_available()
- zfs_ssse3_available()
- zfs_sse4_1_available()
- zfs_sse4_2_available()
- zfs_avx_available()
- zfs_avx2_available()
- zfs_bmi1_available()
- zfs_bmi2_available()
These function should be called once, on module load, or initialization.
They are safe to use from user and kernel space.
If an implementation is using more than single instruction set, both compiler
and runtime support for all relevant instruction sets should be checked.
Kernel fpu methods:
- kfpu_begin()
- kfpu_end()
Use __get_cpuid_max and __cpuid_count from <cpuid.h>
Both gcc and clang have support for these. They also handle ebx register
in case it is used for PIC code.
projects / mirror_zfs.git / log