Andrea Claudi [Fri, 28 Feb 2020 17:36:25 +0000 (18:36 +0100)]
man: rdma-statistic: Add filter description
Add description for filters on rdma statistics show command.
Also add a filter description on the help message of the command.
Additionally, fix some whitespace issue in the man page.
Reported-by: Zhaojuan Guo <zguo@redhat.com> Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Xin Long [Mon, 24 Feb 2020 14:57:01 +0000 (09:57 -0500)]
xfrm: not try to delete ipcomp states when using deleteall
In kernel space, ipcomp(sub) states used by main states are not
allowed to be deleted by users, they would be freed only when
all main states are destroyed and no one uses them.
In user space, ip xfrm sta deleteall doesn't filter these ipcomp
states out, and it causes errors:
# ip xfrm state add src 192.168.0.1 dst 192.168.0.2 spi 0x1000 \
proto comp comp deflate mode tunnel sel src 192.168.0.1 dst \
192.168.0.2 proto gre
# ip xfrm sta deleteall
Failed to send delete-all request
: Operation not permitted
This patch is to fix it by filtering ipcomp states with a check
xsinfo->id.proto == IPPROTO_IPIP.
Fixes: c7699875bee0 ("Import patch ipxfrm-20040707_2.diff") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Thu, 27 Feb 2020 16:45:43 +0000 (17:45 +0100)]
man: ip.8: Add missing vrf subcommand description
Add description to the vrf subcommand and a reference to the
dedicated man page.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Donald Sharp [Tue, 25 Feb 2020 13:12:13 +0000 (08:12 -0500)]
ip route: Do not imply pref and ttl-propagate are per nexthop
Currently `ip -6 route show` gives us this output:
sharpd@eva ~/i/ip (master)> ip -6 route show
::1 dev lo proto kernel metric 256 pref medium
4:5::6:7 nhid 18 proto static metric 20
nexthop via fe80::99 dev enp39s0 weight 1
nexthop via fe80::44 dev enp39s0 weight 1 pref medium
Displaying `pref medium` as the last bit of output implies
that the RTA_PREF is a per nexthop value, when it is infact
a per route piece of data.
Change the output to display RTA_PREF and RTA_TTL_PROPAGATE
before the RTA_MULTIPATH data is shown:
sharpd@eva ~/i/ip (master)> ./ip -6 route show
::1 dev lo proto kernel metric 256 pref medium
4:5::6:7 nhid 18 proto static metric 20 pref medium
nexthop via fe80::99 dev enp39s0 weight 1
nexthop via fe80::44 dev enp39s0 weight 1
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com> Reviewed-by: Andrea Claudi <aclaudi@redhat.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Mon, 17 Feb 2020 13:46:18 +0000 (14:46 +0100)]
nstat: print useful error messages in abort() cases
When nstat temporary file is corrupted or in some other corner cases,
nstat use abort() to stop its execution. This can puzzle some users,
wondering what is the reason for the crash.
This commit replaces abort() with some meaningful error messages and exit()
Reported-by: Renaud Métrich <rmetrich@redhat.com> Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Xin Long [Tue, 18 Feb 2020 03:50:20 +0000 (11:50 +0800)]
erspan: set erspan_ver to 1 by default
Commit 289763626721 ("erspan: add erspan version II support")
breaks the command:
# ip link add erspan1 type erspan key 1 seq erspan 123 \
local 10.1.0.2 remote 10.1.0.1
as erspan_ver is set to 0 by default, then IFLA_GRE_ERSPAN_INDEX
won't be set in gre_parse_opt().
# ip -d link show erspan1
...
erspan remote 10.1.0.1 local 10.1.0.2 ... erspan_index 0 erspan_ver 1
^^^^^^^^^^^^^^
This patch is to change to set erspan_ver to 1 by default.
Fixes: 289763626721 ("erspan: add erspan version II support") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: William Tu <u9012063@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
This patch adds support for the FQ-PIE packet Scheduler
Principles:
- Packets are classified on flows.
- This is a Stochastic model (as we use a hash, several flows might
be hashed to the same slot)
- Each flow has a PIE managed queue.
- Flows are linked onto two (Round Robin) lists,
so that new flows have priority on old ones.
- For a given flow, packets are not reordered.
- Drops during enqueue only.
- ECN capability is off by default.
- ECN threshold (if ECN is enabled) is at 10% by default.
- Uses timestamps to calculate queue delay by default.
Usage:
tc qdisc ... fq_pie [ limit PACKETS ] [ flows NUMBER ]
[ target TIME ] [ tupdate TIME ]
[ alpha NUMBER ] [ beta NUMBER ]
[ quantum BYTES ] [ memory_limit BYTES ]
[ ecn_prob PERCENTAGE ] [ [no]ecn ]
[ [no]bytemode ] [ [no_]dq_rate_estimator ]
defaults:
limit: 10240 packets, flows: 1024
target: 15 ms, tupdate: 15 ms (in jiffies)
alpha: 1/8, beta : 5/4
quantum: device MTU, memory_limit: 32 Mb
ecnprob: 10%, ecn: off
bytemode: off, dq_rate_estimator: off
Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Sachin D. Patil <sdp.sachin@gmail.com> Signed-off-by: V. Saicharan <vsaicharan1998@gmail.com> Signed-off-by: Mohit Bhasi <mohitbhasi1998@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
devlink.c: In function ‘cmd_dev_flash’:
devlink.c:3071:3: warning: ignoring return value of ‘write’, declared with attribute warn_unused_result [-Wunused-result]
3071 | write(pipe_w, &err, sizeof(err));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: 9b13cddfe268 ("devlink: implement flash status monitoring") Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Andrea Claudi [Wed, 29 Jan 2020 14:56:40 +0000 (15:56 +0100)]
ip-xfrm: Fix help messages
After commit 8589eb4efdf2a ("treewide: refactor help messages") help
messages for xfrm state and policy are broken, printing many times the
same protocol in UPSPEC section:
$ ip xfrm state help
[...]
UPSPEC := proto { { tcp | tcp | tcp | tcp } [ sport PORT ] [ dport PORT ] |
{ icmp | icmp | icmp } [ type NUMBER ] [ code NUMBER ] |
gre [ key { DOTTED-QUAD | NUMBER } ] | PROTO }
This happens because strxf_proto function is non-reentrant and gets called
multiple times in the same fprintf instruction.
This commit fix the issue avoiding calls to strxf_proto() with a constant
param, just hardcoding strings for protocol names.
Fixes: 8589eb4efdf2a ("treewide: refactor help messages") Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Ron Diskin [Thu, 23 Jan 2020 10:32:30 +0000 (12:32 +0200)]
devlink: Replace pr_#type_value wrapper functions with common functions
Replace calls for pr_bool/uint/uint64_value with direct calls for the
matching common json_print library function: print_bool(), print_uint()
and print_u64()
Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Ron Diskin [Thu, 23 Jan 2020 10:32:27 +0000 (12:32 +0200)]
json_print: Add new json object function not as array item
Currently new json object opens (and delete_json_obj closes) the object as
an array, what adds prints for the matching bracket '[' ']' at the
start/end of the object. This patch adds new_json_obj_plain() and the
matching delete_json_obj_plain() to enable opening and closing json object,
not as array and leave it to the using function to decide which type of
object to open/close as the main object.
Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Ron Diskin [Thu, 23 Jan 2020 10:32:26 +0000 (12:32 +0200)]
json_print: Introduce print_#type_name_value
Until now print_#type functions supported printing constant names and
unknown (variable) values only.
Add functions to allow printing when the name is also sent to the
function as a variable.
Signed-off-by: Ron Diskin <rondi@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leslie Monis [Thu, 16 Jan 2020 15:57:01 +0000 (21:27 +0530)]
tc: parse attributes with NLA_F_NESTED flag
The kernel now requires all new nested attributes to set the
NLA_F_NESTED flag. Enable tc {qdisc,class,filter} to parse
attributes that have the NLA_F_NESTED flag set.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Sabrina Dubroca [Sun, 19 Jan 2020 10:32:09 +0000 (11:32 +0100)]
ip: xfrm: add espintcp encapsulation
While at it, convert xfrm_xfrma_print and xfrm_encap_type_parse to use
the UAPI macros for encap_type as suggested by David Ahern, and add the
UAPI udp.h header (sync'd from ipsec-next to get the TCP_ENCAP_ESPINTCP
definition).
Co-developed-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David Ahern <dsahern@gmail.com>
Ethan Sommer [Wed, 8 Jan 2020 19:57:05 +0000 (14:57 -0500)]
make yacc usage POSIX compatible
config: put YACC in config.mk and use environmental variable if present
ss:
use YACC variable instead of hardcoding bison
place options before source file argument
use -b to specify file prefix instead of output file, as -o isn't POSIX
compatible, this generates ssfilter.tab.c instead of ssfilter.c
replace any references to ssfilter.c with references to ssfilter.tab.c
tc:
use -p flag to set name prefix instead of bison-specific api.prefix
directive
remove unneeded bison-specific directives
use -b instead of -o, replace references to previously generated
emp_ematch.yacc.[ch] with references to newly generated
emp_ematch.tab.[ch]
Signed-off-by: Ethan Sommer <e5ten.arch@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Jan Engelhardt [Wed, 8 Jan 2020 10:04:24 +0000 (11:04 +0100)]
build: fix build failure with -fno-common
$ make CCOPTS=-fno-common
gcc ... -o ip
ld: rt_names.o (symbol from plugin): in function "rtnl_rtprot_n2a":
(.text+0x0): multiple definition of "numeric"; ip.o (symbol from plugin):(.text+0x0): first defined here
gcc ... -o tipc
ld: ../lib/libutil.a(utils.o):(.bss+0xc): multiple definition of `pretty';
tipc.o:tipc.c:28: first defined here
References: https://bugzilla.opensuse.org/1160244 Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Vladis Dronov [Sun, 19 Jan 2020 01:12:51 +0000 (02:12 +0100)]
ip: fix link type and vlan oneline output
Move link type printing in print_linkinfo() so multiline output does not
break link options line. Add oneline support for vlan's ingress and egress
qos maps.
Before the fix:
5: veth90.4000@veth90: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:9a:05:af:db:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 0 maxmtu 65535
vlan protocol 802.1Q id 4000 <REORDER_HDR> the option line is broken ^^^
ingress-qos-map { 1:2 }
egress-qos-map { 2:1 } addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
5: veth90.4000@veth90: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000\ link/ether 26:9a:05:af:db:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 0 maxmtu 65535 \ vlan protocol 802.1Q id 4000 <REORDER_HDR>
ingress-qos-map { 1:2 } <<< a multiline output despite -oneline
egress-qos-map { 2:1 } addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
After the fix:
5: veth90.4000@veth90: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 26:9a:05:af:db:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 0 maxmtu 65535 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
vlan protocol 802.1Q id 4000 <REORDER_HDR>
ingress-qos-map { 1:2 }
egress-qos-map { 2:1 }
- Use "bands" to specify number of bands explicitly. Underspecified bands
are implicitly ETS and their quantum is taken from MTU. The following
thus gives each band the same weight:
Petr Machata [Mon, 13 Jan 2020 14:16:28 +0000 (15:16 +0100)]
libnetlink: parse_rtattr_nested should allow NLA_F_NESTED flag
In kernel commit 8cb081746c03 ("netlink: make validation more configurable
for future strictness"), Linux started implicitly flagging nests with
NLA_F_NESTED, unless the nest is created with nla_nest_start_noflag().
The ETS code uses nla_nest_start() where possible, so it does not work with
the current iproute2 code. Have libnetlink catch up by admitting the flag
in the attribute.
Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Ido Schimmel [Thu, 16 Jan 2020 18:43:48 +0000 (20:43 +0200)]
ip route: Print "rt_offload" and "rt_trap" indication
The kernel now signals the offload state of a route using the
'RTM_F_OFFLOAD' and 'RTM_F_TRAP' flags. Print these to help users
understand the offload state of each route. The "rt_" prefix is used in
order to distinguish it from the offload state of nexthops.
Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Tuong Lien [Mon, 30 Dec 2019 03:03:33 +0000 (10:03 +0700)]
tipc: fix clang warning in tipc/node.c
When building tipc with clang, the following warning is found:
tipc
CC bearer.o
CC cmdl.o
CC link.o
CC media.o
CC misc.o
CC msg.o
CC nametable.o
CC node.o
node.c:182:24: warning: field 'key' with variable sized type 'struct tipc_aead_key' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct tipc_aead_key key;
This commit fixes it by putting the memory area allocated for the user
input key along with the variable-sized 'key' structure in the 'union'
form instead.
Fixes: 24bee3bf9752 ("tipc: add new commands to set TIPC AEAD key") Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Peter Junos [Thu, 26 Dec 2019 13:07:09 +0000 (14:07 +0100)]
ss: use compact output for undetected screen width
This change fixes calculation of width in case user pipes the output.
SS output output works correctly when stdout is a terminal. When one
pipes the output, it tries to use 80 or 160 columns. That adds a
line-break if user has terminal width of 100 chars and output is of
the similar width. No width is assumed here.
To reproduce the issue, call
ss | less
and see every other line empty if your screen is between 80 and 160
columns wide.
This second version of the patch fixes screen_width being set to arbitrary
value.
Signed-off-by: Peter Junos <petoju@gmail.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Leslie Monis [Wed, 25 Dec 2019 19:04:16 +0000 (00:34 +0530)]
tc: sfq: add support for JSON output
Enable proper JSON output for the SFQ Qdisc.
Use the long double format specifier to print the value of
"probability".
Also, fix the indentation in the online output of the contents in the
tc_sfqred_stats structure.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leslie Monis [Wed, 25 Dec 2019 19:04:15 +0000 (00:34 +0530)]
tc: sfb: add support for JSON output
Enable proper JSON output for the SFB Qdisc.
Make the output for options "rehash" and "db" explicit.
Use the long double format specifier to print probability values.
Use sprint_time() to print time values.
Also, fix the indentation in sfb_print_opt().
Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leslie Monis [Wed, 25 Dec 2019 19:04:14 +0000 (00:34 +0530)]
tc: pie: add support for JSON output
Enable proper JSON output for the PIE Qdisc.
Use sprint_time() to print the value of tc_pie_xstats->delay.
Use the long double format specifier to print tc_pie_xstats->prob.
Also, fix the indentation in the oneline output of statistics and update
the man page to reflect this change.
Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Leslie Monis [Wed, 25 Dec 2019 19:04:12 +0000 (00:34 +0530)]
tc: fq: add support for JSON output
Enable proper JSON output for the FQ Qdisc.
Use the "KEY VALUE" format for oneline output of statistics instead of
"VALUE KEY", and remove unnecessary commas from the output.
Use sprint_size() to print size values in fq_print_opt().
Use sprint_time64() to print time values in fq_print_xstats().
Also, update the man page to reflect the changes in the output format.
Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Antony Antony [Thu, 19 Dec 2019 14:18:03 +0000 (15:18 +0100)]
ip: xfrm if_id -ve value is error
if_id is u32, error on -ve values instead of setting to 0
after :
ip link add ipsec1 type xfrm dev lo if_id -10
Error: argument "-10" is wrong: if_id value is invalid
before : note xfrm if_id 0
ip link add ipsec1 type xfrm dev lo if_id -10
ip -d link show dev ipsec1
9: ipsec1@lo: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/none 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500
xfrm if_id 0 addrgenmode eui64 numtxqueues 1 numrxqueues 1 gso_max_size 65536 gso_max_segs 65535
Fixes: 286446c1e8c ("ip: support for xfrm interfaces") Signed-off-by: Antony Antony <antony@phenome.org> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Michal Kubecek [Sun, 15 Dec 2019 21:06:10 +0000 (22:06 +0100)]
ip link: show permanent hardware address
Display permanent hardware address of an interface in output of
"ip link show" and "ip addr show". To reduce noise, permanent address is
only shown if it is different from current one.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David Ahern <dsahern@gmail.com>
Aya Levin [Wed, 11 Dec 2019 15:45:36 +0000 (17:45 +0200)]
devlink: Fix fmsg nesting in non JSON output
When an object or an array opening follows a name (label), add a new
line and indentation before printing the label. When name (label) is
followed by a value, print both at the same line.
Aya Levin [Wed, 11 Dec 2019 15:45:35 +0000 (17:45 +0200)]
devlink: Add a new time-stamp format for health reporter's dump
Introduce a new attribute representing a new time-stamp format: current
time in ns (to comply with y2038) instead of jiffies. If the new
attribute was received, translate the time-stamp accordingly (ns).
Fixes: 2f1242efe9d0 ("devlink: Add devlink health show command") Signed-off-by: Aya Levin <ayal@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:44 +0000 (15:43 +0900)]
bridge: Fix tunnelshow json output
repeats for "vlan tunnelshow" what commit 0f36267485e3 ("bridge: fix vlan
show formatting") did for "vlan show". This fixes problems in json output.
Note that the resulting json output format of "vlan tunnelshow" is not the
same as the original, introduced in commit 8652eeb3ab12 ("bridge: vlan:
support for per vlan tunnel info"). Changes similar to the ones done for
"vlan show" in commit 0f36267485e3 ("bridge: fix vlan show formatting") are
carried over to "vlan tunnelshow".
Fixes: c7c1a1ef51ae ("bridge: colorize output and use JSON print library") Fixes: 0f36267485e3 ("bridge: fix vlan show formatting") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:43 +0000 (15:43 +0900)]
bridge: Deduplicate vlan show functions
print_vlan() and print_vlan_tunnel() are almost identical copies, save for
a missing newline in the latter which leads to broken output of "vlan
tunnelshow" in normal mode.
Fixes: c7c1a1ef51ae ("bridge: colorize output and use JSON print library") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:42 +0000 (15:43 +0900)]
bridge: Fix vni printing
Since commit c7c1a1ef51ae ("bridge: colorize output and use JSON print
library"), print_range() is used for vid (16bits) and vni. However, the
latter are 32bits so they get truncated. They got truncated even before
that commit though.
Fixes: 8652eeb3ab12 ("bridge: vlan: support for per vlan tunnel info") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:41 +0000 (15:43 +0900)]
bridge: Fix BRIDGE_VLAN_TUNNEL attribute sizes
As per the kernel's vlan_tunnel_policy, IFLA_BRIDGE_VLAN_TUNNEL_VID and
IFLA_BRIDGE_VLAN_TUNNEL_FLAGS have type NLA_U16.
Fixes: 8652eeb3ab12 ("bridge: vlan: support for per vlan tunnel info") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:40 +0000 (15:43 +0900)]
bridge: Fix src_vni argument in man page
"SRC VNI" is only one argument and should appear as such. Moreover, this
argument to the src_vni option is documented under three forms: "SRC_VNI",
"SRC VNI" and "VNI" in different places. Consistenly use the simplest form,
"VNI".
Fixes: c5b176e5ba1f ("bridge: fdb: add support for src_vni option") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Benjamin Poirier [Mon, 16 Dec 2019 06:43:37 +0000 (15:43 +0900)]
json_print: Remove declaration without implementation
Fixes: 6377572f0aa8 ("ip: ip_print: add new API to print JSON or regular format output") Signed-off-by: Benjamin Poirier <bpoirier@cumulusnetworks.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Brian Vazquez [Wed, 4 Dec 2019 21:32:03 +0000 (13:32 -0800)]
tc: fix warning in tc/q_pie.c
Warning was:
q_pie.c:202:22: error: implicit conversion from 'unsigned long' to
'double'
Fixes: 492ec9558b30 ("tc: pie: change maximum integer value of tc_pie_xstats->prob") Cc: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Brian Vazquez <brianvv@google.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
PIE now uses per packet timestamps to calculate queuing
delay. The average dequeue rate based queue delay
calculation is now made optional. This patch adds the option
to enable or disable the use of Little's law to calculate
queuing delay.
Signed-off-by: Gautam Ramakrishnan <gautamramk@gmail.com> Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: Mohit P. Tahiliani <tahiliani@nitk.edu.in> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
which enable user to set and remove AEAD keys in kernel TIPC (requires
the kernel option - 'TIPC_CRYPTO').
For the 'set key' command, the given 'nodeid' parameter decides the
mode to be applied to the key, particularly:
- If NODEID is empty, the key is a 'cluster' key which will be used for
all message encryption/decryption from/to the node (i.e. both TX & RX).
The same key will be set in the other nodes.
- If NODEID is own node, the key is used for message encryption (TX)
from the node. Whereas, if NODEID is a peer node, the key is for
message decryption (RX) from that peer node. This is the 'per-node-key'
mode that each nodes in the cluster has its specific (TX) key.
Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David Ahern <dsahern@gmail.com>
Eli Britstein [Wed, 20 Nov 2019 12:42:45 +0000 (14:42 +0200)]
tc: flower: support masked port destination and source match
Extend destination and source port match to support masks, accepting
both decimal and hexadecimal formats.
Also add missing documentation to synopsis in manpage.
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 protocol ip parent ffff: prio 1 flower skip_hw \
ip_proto tcp dst_port 1234/0xff00 action drop
$ tc -s filter show dev eth0 parent ffff:
filter protocol ip pref 1 flower chain 0
filter protocol ip pref 1 flower chain 0 handle 0x1
eth_type ipv4
ip_proto tcp
dst_port 1234/0xff00
skip_hw
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1 installed 26 sec used 26 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
$ tc -p -j filter show dev eth0 parent ffff:
"options": {
"keys": {
"dst_port": 1234,
"dst_port_mask": 65280
...
Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Moshe Shemesh [Sun, 24 Nov 2019 16:02:38 +0000 (18:02 +0200)]
ip: fix oneline output
Ip tool oneline option should output each record on a single line. While
oneline option is active the variable _SL_ replaces line feeds with the
'\' character. However, at the end of print_linkinfo() the variable _SL_
shouldn't be used, otherwise the whole output is on a single line.
Before this fix:
$ip -o link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00\2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500
qdisc fq_codel state UP mode DEFAULT group default qlen 1000\
link/ether 52:54:00:60:0a:db brd ff:ff:ff:ff:ff:ff\3: eth1:
<BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode
DEFAULT group default qlen 1000\ link/ether 00:50:56:1b:05:cd brd
ff:ff:ff:ff:ff:ff\
After this fix:
$ip -o link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default qlen 1000\ link/loopback 00:00:00:00:00:00 brd
00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UP mode DEFAULT group default qlen 1000\ link/ether 52:54:00:60:0a:db
brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state
UP mode DEFAULT group default qlen 1000\ link/ether 00:50:56:1b:05:cd
brd ff:ff:ff:ff:ff:ff
Fixes: 3aa0e51be64b ("ip: add support for alternative name addition/deletion/list") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Jakub Kicinski [Wed, 20 Nov 2019 17:56:06 +0000 (09:56 -0800)]
devlink: fix requiring either handle
devlink sb occupancy show requires device or port handle.
It passes both device and port handle bits as required to
dl_argv_parse() so since commit 1896b100af46 ("devlink: catch
missing strings in dl_args_required") devlink will now
complain that only one is present:
$ devlink sb occupancy show pci/0000:06:00.0/0
BUG: unknown argument required but not found
Drop the bit for the handle which was not found from required.
Ido Kalir [Mon, 18 Nov 2019 08:35:30 +0000 (10:35 +0200)]
rdma: Rewrite custom JSON and prints logic to use common API
Instead of doing open-coded solution to generate JSON and prints, let's
reuse existing infrastructure and APIs to do the same as ip/*.
Before this change:
if (rd->json_output)
jsonw_uint_field(rd->jw, "sm_lid", sm_lid);
else
pr_out("sm_lid %u ", sm_lid);
After this change:
print_uint(PRINT_ANY, "sm_lid", "sm_lid %u ", sm_lid);
All the print functions are converted to support color but for now the
type of color is COLOR_NONE. This is done as a preparation to addition
of color enable option. Such change will require rewrite of command line
arguments parser which is out-of-scope for this patch.
Signed-off-by: Ido Kalir <idok@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
Danit Goldberg [Mon, 18 Nov 2019 07:49:12 +0000 (09:49 +0200)]
ip link: Add support to get SR-IOV VF node GUID and port GUID
Extend iplink to show VF GUIDs (IFLA_VF_IB_NODE_GUID, IFLA_VF_IB_PORT_GUID),
giving the ability for user-space application to print GUID values.
This ability is added to the one of setting new node GUID and port GUID values.
Suitable ip link command:
- ip link show <device>
For example:
- ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33
- ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10
- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0 link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com>
projects / mirror_iproute2.git / log