hw/sd/sdhci: Add a comment to distinct the i.MX eSDHC functions
This file keeps the various QDev blocks separated by comments.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Cleber Rosa <crosa@redhat.com>
Message-id: 20191005154748.21718-3-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Tue, 22 Oct 2019 15:50:36 +0000 (16:50 +0100)]
hw/m68k/mcf5208.c: Switch to transaction-based ptimer API
Switch the mcf5208 code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Thomas Huth <huth@tuxfamily.org>
Message-id: 20191017132905.5604-9-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:36 +0000 (16:50 +0100)]
hw/watchdog/etraxfs_timer.c: Switch to transaction-based ptimer API
Switch the etraxfs_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017132905.5604-7-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:36 +0000 (16:50 +0100)]
hw/timer/altera_timer.c: Switch to transaction-based ptimer API
Switch the altera_timer code away from bottom-half based ptimers to
the new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017132905.5604-6-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:36 +0000 (16:50 +0100)]
hw/timer/lm32_timer: Switch to transaction-based ptimer API
Switch the lm32_timer code away from bottom-half based ptimers to the
new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the ytimer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017132905.5604-4-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:36 +0000 (16:50 +0100)]
hw/timer/sh_timer: Switch to transaction-based ptimer API
Switch the sh_timer code away from bottom-half based ptimers to the
new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017132905.5604-3-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:35 +0000 (16:50 +0100)]
hw/timer/puv3_ost.c: Switch to transaction-based ptimer API
Switch the puv3_ost code away from bottom-half based ptimers to the
new transaction-based ptimer API. This just requires adding
begin/commit calls around the various places that modify the ptimer
state, and using the new ptimer_init() function to create the timer.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017132905.5604-2-peter.maydell@linaro.org
Peter Maydell [Tue, 22 Oct 2019 15:50:35 +0000 (16:50 +0100)]
hw/timer/arm_mptimer.c: Undo accidental rename of arm_mptimer_init()
In commit b01422622b we did an automated rename of the ptimer_init()
function to ptimer_init_with_bh(). Unfortunately this caught the
unrelated arm_mptimer_init() function. Undo that accidental
renaming.
Fixes: b01422622b7c7293196fdaf1dbb4f495af44ecf9 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20191017133331.5901-1-peter.maydell@linaro.org
Guenter Roeck [Tue, 22 Oct 2019 15:50:35 +0000 (16:50 +0100)]
hw/timer/exynos4210_mct: Initialize ptimer before starting it
When booting a recent Linux kernel, the qemu message "Timer with delta
zero, disabling" is seen, apparently because a ptimer is started before
being initialized. Fix the problem by initializing the offending ptimer
before starting it.
The bug is effectively harmless in the old QEMUBH setup
because the sequence of events is:
* the delta zero means the timer expires immediately
* ptimer_reload() arranges for exynos4210_gfrc_event() to be called
* ptimer_reload() notices the zero delta and disables the timer
* later, the QEMUBH runs, and exynos4210_gfrc_event() correctly
configures the timer and restarts it
In the new transaction based API the bug is still harmless,
but differences of when the callback function runs mean the
message is not printed any more:
* ptimer_run() does nothing as it's inside a transaction block
* ptimer_transaction_commit() sees it has work to do and
calls ptimer_reload()
* the zero delta means the timer expires immediately
* ptimer_reload() calls exynos4210_gfrc_event() directly
* exynos4210_gfrc_event() configures the timer
* the delta is no longer zero so ptimer_reload() doesn't complain
(the zero-delta test is after the trigger-callback in
the ptimer_reload() function)
Regardless, the behaviour here was not intentional, and we should
just program the ptimer correctly to start with.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20191018143149.9216-1-peter.maydell@linaro.org
[PMM: Expansion/clarification of the commit message:
the message is about a zero delta, not a zero period;
added detail to the commit message of the analysis of what
is happening and why the kernel boots even with the message;
added note that the message goes away with the new ptimer API] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/vivier2/tags/trivial-branch-pull-request:
tests/migration: fix a typo in comment
qemu-doc: Remove paragraph about requiring a HD image with -kernel
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thomas Huth [Tue, 1 Oct 2019 11:01:11 +0000 (13:01 +0200)]
qemu-doc: Remove paragraph about requiring a HD image with -kernel
The need for specifying "-hda" together with "-kernel" has been removed in
commit 57a46d057995 ("Convert linux bootrom to external rom and fw_cfg"),
almost 10 years ago, so let's remove this description from our documentation
now, too.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20191001110111.4870-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
s390x/kvm: Set default cpu model for all machine classes
We have to set the default model of all machine classes, not just for
the active one. Otherwise, "query-machines" will indicate the wrong
CPU model ("qemu-s390x-cpu" instead of "host-s390x-cpu") as
"default-cpu-type".
Doing a
{"execute":"query-machines"}
under KVM now results in
{"return": [
{
"hotpluggable-cpus": true,
"name": "s390-ccw-virtio-4.0",
"numa-mem-supported": false,
"default-cpu-type": "host-s390x-cpu",
"cpu-max": 248,
"deprecated": false},
{
"hotpluggable-cpus": true,
"name": "s390-ccw-virtio-2.7",
"numa-mem-supported": false,
"default-cpu-type": "host-s390x-cpu",
"cpu-max": 248,
"deprecated": false
} ...
Libvirt probes all machines via "-machine none,accel=kvm:tcg" and will
currently see the wrong CPU model under KVM.
Reported-by: Jiri Denemark <jdenemar@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Fixes: b6805e127c6b ("s390x: use generic cpu_model parsing") Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191021100515.6978-1-david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: Fix VECTOR SUBTRACT WITH BORROW COMPUTE BORROW INDICATION
The numbers are unsigned, the computation is wrong. "Each operand is
treated as an unsigned binary integer".
Let's implement as given in the PoP:
"A subtraction is performed by adding the contents of the second operand
with the bitwise complement of the third operand along with a borrow
indication from the rightmost bit of the fourth operand."
Reuse gen_accc2_i64().
Fixes: bc725e65152c ("s390x/tcg: Implement VECTOR SUBTRACT WITH BORROW COMPUTE BORROW INDICATION") Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191021085715.3797-7-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
s390x/tcg: Fix VECTOR SUBTRACT WITH BORROW INDICATION
Testing this, there seems to be something messed up. We are dealing with
unsigned numbers. "Each operand is treated as an unsigned binary integer."
Let's just implement as written in the PoP:
"A subtraction is performed by adding the contents of
the second operand with the bitwise complement of
the third operand along with a borrow indication from
the rightmost bit position of the fourth operand and
the result is placed in the first operand."
We can reuse gen_ac2_i64().
Fixes: 48390a7c2716 ("s390x/tcg: Implement VECTOR SUBTRACT WITH BORROW INDICATION") Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20191021085715.3797-6-david@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like my idea of what a "borrow" is was wrong. The PoP says:
"If the resulting subtraction results in a carry out of bit zero, a value
of one is placed in the corresponding element of the first operand;
otherwise, a value of zero is placed in the corresponding element"
As clarified by Richard, all we have to do is invert the result.
Andrew Jones [Wed, 16 Oct 2019 14:54:34 +0000 (16:54 +0200)]
s390x/cpumodel: Add missing visit_free
Beata Michalska noticed this missing visit_free() while reviewing
arm's implementation of qmp_query_cpu_model_expansion(), which is
modeled off this s390x implementation.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20191016145434.7007-1-drjones@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Shu-Chun Weng [Fri, 18 Oct 2019 00:19:20 +0000 (17:19 -0700)]
Fix unsigned integer underflow in fd-trans.c
In any of these `*_for_each_*` functions, the last entry in the buffer (so the
"remaining length in the buffer" `len` is equal to the length of the
entry `nlmsg_len`/`nla_len`/etc) has size that is not a multiple of the
alignment, the aligned lengths `*_ALIGN(*_len)` will be greater than `len`.
Since `len` is unsigned (`size_t`), it underflows and the loop will read
pass the buffer.
This may manifest as random EINVAL or EOPNOTSUPP error on IO or network
system calls.
* remotes/kraxel/tags/audio-20191018-pull-request:
paaudio: fix channel order for usb-audio 5.1 and 7.1 streams
usbaudio: change playback counters to 64 bit
usb-audio: support more than two channels of audio
usb-audio: do not count on avail bytes actually available
audio: basic support for multichannel audio
audio: replace shift in audio_pcm_info with bytes_per_frame
audio: support more than two channels in volume setting
paaudio: get/put_buffer functions
audio: make mixeng optional
audio: add mixing-engine option (documentation)
audio: paaudio: ability to specify stream name
audio: paaudio: fix connection and stream name
audio: fix parameter dereference before NULL check
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/jnsnow/tags/bitmaps-pull-request:
dirty-bitmaps: remove deprecated autoload parameter
MAINTAINERS: Add Vladimir as a reviewer for bitmaps
qcow2-bitmap: move bitmap reopen-rw code to qcow2_reopen_commit
block/qcow2-bitmap: fix and improve qcow2_reopen_bitmaps_rw
iotests: add test 260 to check bitmap life after snapshot + commit
block/qcow2-bitmap: do not remove bitmaps on reopen-ro
block/qcow2-bitmap: drop qcow2_reopen_bitmaps_rw_hint()
block/qcow2-bitmap: get rid of bdrv_has_changed_persistent_bitmaps
iotests: add test-case to 165 to test reopening qcow2 bitmaps to RW
block: reverse order for reopen commits
block: switch reopen queue from QSIMPLEQ to QTAILQ
block/dirty-bitmap: refactor bdrv_dirty_bitmap_next
block/dirty-bitmap: drop BdrvDirtyBitmap.mutex
block/dirty-bitmap: add bs link
block/dirty-bitmap: drop meta
block/qcow2: proper locking on bitmap add/remove paths
block/dirty-bitmap: return int from bdrv_remove_persistent_dirty_bitmap
block: move bdrv_can_store_new_dirty_bitmap to block/dirty-bitmap.c
util/hbitmap: strict hbitmap_reset
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/kraxel/tags/ui-20191018-pull-request:
ui: fix keymap file search in input-barrier object
curses: correctly pass the color pair to setcchar()
curses: use the bit mask constants provided by curses
ui: Fix hanging up Cocoa display on macOS 10.15 (Catalina)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Matthew Kilgore [Fri, 4 Oct 2019 03:53:38 +0000 (23:53 -0400)]
curses: correctly pass the color pair to setcchar()
The current code does not correctly pass the color pair information to
setcchar(), it instead always passes zero. This results in the curses
output always being in white on black.
This patch fixes this by using PAIR_NUMBER() to retrieve the color pair
number from the chtype value, and then passes that value as an argument
to setcchar().
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-3-mattkilgore12@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Matthew Kilgore [Fri, 4 Oct 2019 03:53:37 +0000 (23:53 -0400)]
curses: use the bit mask constants provided by curses
The curses API provides the A_ATTRIBUTES and A_CHARTEXT bit masks for
getting the attributes and character parts of a chtype, respectively. We
should use provided constants instead of using 0xff.
Signed-off-by: Matthew Kilgore <mattkilgore12@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Tested-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Message-id: 20191004035338.25601-2-mattkilgore12@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hikaru Nishida [Tue, 15 Oct 2019 01:07:34 +0000 (10:07 +0900)]
ui: Fix hanging up Cocoa display on macOS 10.15 (Catalina)
macOS API documentation says that before applicationDidFinishLaunching
is called, any events will not be processed. However, some events are
fired before it is called in macOS Catalina. This causes deadlock of
iothread_lock in handleEvent while it will be released after the
app_started_sem is posted.
This patch avoids processing events before the app_started_sem is
posted to prevent this deadlock.
Kővágó, Zoltán [Sun, 13 Oct 2019 19:58:06 +0000 (21:58 +0200)]
usbaudio: change playback counters to 64 bit
With stereo playback, they need about 375 minutes of continuous audio
playback to overflow, which is usually not a problem (as stopping and
later resuming playback resets the counters). But with 7.1 audio, they
only need about 95 minutes to overflow.
After the overflow, the buf->prod % USBAUDIO_PACKET_SIZE(channels)
assertion no longer holds true, which will result in overflowing the
buffer. With 64 bit variables, it would take about 762000 years to
overflow.
Kővágó, Zoltán [Sun, 13 Oct 2019 19:58:05 +0000 (21:58 +0200)]
usb-audio: support more than two channels of audio
This commit adds support for 5.1 and 7.1 audio playback. This commit
adds a new property to usb-audio:
* multi=on|off
Whether to enable the 5.1 and 7.1 audio support. When off (default)
it continues to emulate the old stereo-only device. When on, it
emulates a slightly different audio device that supports 5.1 and 7.1
audio.
Kővágó, Zoltán [Sun, 13 Oct 2019 19:58:02 +0000 (21:58 +0200)]
audio: replace shift in audio_pcm_info with bytes_per_frame
The bit shifting trick worked because the number of bytes per frame was
always a power-of-two (since QEMU only supports mono, stereo and 8, 16
and 32 bit samples). But if we want to add support for surround sound,
this no longer holds true.
Kővágó, Zoltán [Sun, 13 Oct 2019 19:57:58 +0000 (21:57 +0200)]
audio: add mixing-engine option (documentation)
This will allow us to disable mixeng when we use a decent backend.
Disabling mixeng have a few advantages:
* we no longer convert the audio output from one format to another, when
the underlying audio system would just convert it to a third format.
We no longer convert, only the underlying system, when needed.
* the underlying system probably has better resampling and sample format
converting methods anyway...
* we may support formats that the mixeng currently does not support (S24
or float samples, more than two channels)
* when using an audio server (like pulseaudio) different sound card
outputs will show up as separate streams, even if we use only one
backend
Disadvantages:
* audio capturing no longer works (wavcapture, and vnc audio extension)
* some backends only support a single playback stream or very picky
about the audio format. In this case we can't disable mixeng.
Originally thw two main use cases of the disabled option was: using
unsupported audio formats (5.1 and 7.1 audio) and having different
pulseaudio streams per audio frontend. Since we can have multiple
-audiodevs, the latter is not that important, so currently you only need
this option if you want to use 5.1 or 7.1 audio (implemented in a later
patch), otherwise it's probably better to stick to the old and tried
mixeng, since it's less picky about the backends.
The ideal solution would be to port as much as possible to gstreamer,
but this is currently out of scope:
https://wiki.qemu.org/Internships/ProjectIdeas/AudioGStreamer
Kővágó, Zoltán [Tue, 10 Sep 2019 23:26:19 +0000 (01:26 +0200)]
audio: paaudio: fix connection and stream name
Connection name was previously erroneously set to the server socket
path, while connection names were simply "qemu". After this patch, the
connection name will be the vm name (falling back to "qemu" if not
specified), while stream names will be the audiodev's id.
This parameter has been deprecated since 2.12.0 and is eligible for
removal. Remove this parameter as it is actually completely ignored;
let's not give false hope.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191002232411.29968-1-jsnow@redhat.com
John Snow [Sat, 5 Oct 2019 19:44:48 +0000 (15:44 -0400)]
MAINTAINERS: Add Vladimir as a reviewer for bitmaps
I already try to make sure all bitmaps patches have been reviewed by both
Red Hat and Virtuozzo anyway, so this formalizes the arrangement.
Fam meanwhile is no longer as active, so I am removing him as a co-maintainer
simply to reflect the current practice.
Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191005194448.16629-2-jsnow@redhat.com
qcow2-bitmap: move bitmap reopen-rw code to qcow2_reopen_commit
The only reason I can imagine for this strange code at the very-end of
bdrv_reopen_commit is the fact that bs->read_only updated after
calling drv->bdrv_reopen_commit in bdrv_reopen_commit. And in the same
time, prior to previous commit, qcow2_reopen_bitmaps_rw did a wrong
check for being writable, when actually it only need writable file
child not self.
So, as it's fixed, let's move things to correct place.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190927122355.7344-10-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block/qcow2-bitmap: fix and improve qcow2_reopen_bitmaps_rw
- Correct check for write access to file child, and in correct place
(only if we want to write).
- Support reopen rw -> rw (which will be used in following commit),
for example, !bdrv_dirty_bitmap_readonly() is not a corruption if
bitmap is marked IN_USE in the image.
- Consider unexpected bitmap as a corruption and check other
combinations of in-image and in-RAM bitmaps.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-9-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
iotests: add test 260 to check bitmap life after snapshot + commit
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-8-vsementsov@virtuozzo.com
[Maintainer edit: removed 260 from auto group per Peter Maydell. --js] Signed-off-by: John Snow <jsnow@redhat.com>
block/qcow2-bitmap: do not remove bitmaps on reopen-ro
qcow2_reopen_bitmaps_ro wants to store bitmaps and then mark them all
readonly. But the latter don't work, as
qcow2_store_persistent_dirty_bitmaps removes bitmaps after storing.
It's OK for inactivation but bad idea for reopen-ro. And this leads to
the following bug:
Assume we have persistent bitmap 'bitmap0'.
Create external snapshot
bitmap0 is stored and therefore removed
Commit snapshot
now we have no bitmaps
Do some writes from guest (*)
they are not marked in bitmap
Shutdown
Start
bitmap0 is loaded as valid, but it is actually broken! It misses
writes (*)
Incremental backup
it will be inconsistent
So, let's stop removing bitmaps on reopen-ro. But don't rejoice:
reopening bitmaps to rw is broken too, so the whole scenario will not
work after this patch and we can't enable corresponding test cases in
260 iotests still. Reopening bitmaps rw will be fixed in the following
patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-7-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block/qcow2-bitmap: drop qcow2_reopen_bitmaps_rw_hint()
The function is unused, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-6-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block/qcow2-bitmap: get rid of bdrv_has_changed_persistent_bitmaps
Firstly, no reason to optimize failure path. Then, function name is
ambiguous: it checks for readonly and similar things, but someone may
think that it will ignore normal bitmaps which was just unchanged, and
this is in bad relation with the fact that we should drop IN_USE flag
for unchanged bitmaps in the image.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-5-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
iotests: add test-case to 165 to test reopening qcow2 bitmaps to RW
Reopening bitmaps to RW was broken prior to previous commit. Check that
it works now.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190927122355.7344-4-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
It's needed to fix reopening qcow2 with bitmaps to RW. Currently it
can't work, as qcow2 needs write access to file child, to mark bitmaps
in-image with IN_USE flag. But usually children goes after parents in
reopen queue and file child is still RO on qcow2 reopen commit. Reverse
reopen order to fix it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Acked-by: Max Reitz <mreitz@redhat.com> Acked-by: John Snow <jsnow@redhat.com>
Message-id: 20190927122355.7344-3-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block: switch reopen queue from QSIMPLEQ to QTAILQ
We'll need reverse-foreach in the following commit, QTAILQ support it,
so move to QTAILQ.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190927122355.7344-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
bdrv_dirty_bitmap_next is always used in same pattern. So, split it
into _next and _first, instead of combining two functions into one and
add FOR_EACH_DIRTY_BITMAP macro.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-5-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
mutex field is just a pointer to bs->dirty_bitmap_mutex, so no needs
to store it in BdrvDirtyBitmap when we have bs pointer in it (since
previous patch).
Drop mutex field. Constantly use bdrv_dirty_bitmaps_lock/unlock in
block/dirty-bitmap.c to make it more obvious that it's not per-bitmap
lock. Still, for simplicity, leave bdrv_dirty_bitmap_lock/unlock
functions as an external API.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-4-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
Add bs field to BdrvDirtyBitmap structure. Drop BlockDriverState
parameter from bitmap APIs where possible.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-3-vsementsov@virtuozzo.com
[Rebased on top of block-copy. --js] Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190916141911.5255-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block/qcow2: proper locking on bitmap add/remove paths
qmp_block_dirty_bitmap_add and do_block_dirty_bitmap_remove do acquire
aio context since 0a6c86d024c52b. But this is not enough: we also must
lock qcow2 mutex when access in-image metadata. Especially it concerns
freeing qcow2 clusters.
To achieve this, move qcow2_can_store_new_dirty_bitmap and
qcow2_remove_persistent_dirty_bitmap to coroutine context.
Since we work in coroutines in correct aio context, we don't need
context acquiring in blockdev.c anymore, drop it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-4-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block/dirty-bitmap: return int from bdrv_remove_persistent_dirty_bitmap
It's more comfortable to not deal with local_err.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-3-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
block: move bdrv_can_store_new_dirty_bitmap to block/dirty-bitmap.c
block/dirty-bitmap.c seems to be more appropriate for it and
bdrv_remove_persistent_dirty_bitmap already in it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920082543.23444-2-vsementsov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
hbitmap_reset has an unobvious property: it rounds requested region up.
It may provoke bugs, like in recently fixed write-blocking mode of
mirror: user calls reset on unaligned region, not keeping in mind that
there are possible unrelated dirty bytes, covered by rounded-up region
and information of this unrelated "dirtiness" will be lost.
Make hbitmap_reset strict: assert that arguments are aligned, allowing
only one exception when @start + @count == hb->orig_size. It's needed
to comfort users of hbitmap_next_dirty_area, which cares about
hb->orig_size.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-Id: <20190806152611.280389-1-vsementsov@virtuozzo.com>
[Maintainer edit: Max's suggestions from on-list. --js]
[Maintainer edit: Eric's suggestion for aligned macro. --js] Signed-off-by: John Snow <jsnow@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:35:43 BST
# gpg: using RSA key 5A322FD5ABC4D3DBACCFD1AA2807936F984DC5A6
# gpg: issuer "ehabkost@redhat.com"
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full]
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6
* remotes/ehabkost/tags/machine-next-pull-request:
target/i386: Add Snowridge-v2 (no MPX) CPU model
i386: Omit all-zeroes entries from KVM CPUID table
i386: Fix legacy guest with xsave panic on host kvm without update cpuid.
target/i386: drop the duplicated definition of cpuid AVX512_VBMI macro
target/i386: clean up comments over 80 chars per line
memory-device: break the loop if tmp exceed the hinted range
memory-device: not necessary to use goto for the last check
hw/misc/vmcoreinfo: Add comment about reset handler
hw/input/lm832x: Convert reset handler to DeviceReset
hw/isa/vt82c686: Convert reset handler to DeviceReset
hw/ide/via82c: Convert reset handler to DeviceReset
hw/ide/sii3112: Convert reset handler to DeviceReset
hw/ide/piix: Convert reset handler to DeviceReset
hw/isa/piix4: Convert reset handler to DeviceReset
hw/acpi/piix4: Convert reset handler to DeviceReset
numa: Introduce MachineClass::auto_enable_numa for implicit NUMA node
tests: cpu-plug-test: fix device_add for pc/q35 machines
tests: add qtest_qmp_device_add_qdict() helper
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Oct 2019 15:48:56 +0000 (16:48 +0100)]
Merge remote-tracking branch 'remotes/rth/tags/pull-tcg-20191013' into staging
Host vector support for tcg/ppc.
Fix thread=single cpu kicking.
# gpg: Signature made Mon 14 Oct 2019 15:11:55 BST
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* remotes/rth/tags/pull-tcg-20191013: (23 commits)
cpus: kick all vCPUs when running thread=single
tcg/ppc: Update vector support for v3.00 dup/dupi
tcg/ppc: Update vector support for v3.00 load/store
tcg/ppc: Update vector support for v3.00 Altivec
tcg/ppc: Update vector support for v2.07 FP
tcg/ppc: Update vector support for v2.07 VSX
tcg/ppc: Update vector support for v2.07 Altivec
tcg/ppc: Update vector support for VSX
tcg/ppc: Enable Altivec detection
tcg/ppc: Support vector dup2
tcg/ppc: Support vector multiply
tcg/ppc: Support vector shift by immediate
tcg/ppc: Add support for vector saturated add/subtract
tcg/ppc: Add support for vector add/subtract
tcg/ppc: Add support for vector maximum/minimum
tcg/ppc: Add support for load/store/logic/comparison
tcg/ppc: Enable tcg backend vector compilation
tcg/ppc: Replace HAVE_ISEL macro with a variable
tcg/ppc: Replace HAVE_ISA_2_06
tcg/ppc: Create TCGPowerISA and have_isa
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Peter Maydell [Thu, 17 Oct 2019 14:30:44 +0000 (15:30 +0100)]
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eduardo Habkost [Mon, 14 Oct 2019 15:01:33 +0000 (12:01 -0300)]
sphinx: Use separate doctree directories for different builders
sphinx-build is buggy when multiple processes are using the same
doctree directory in parallel. See the 3-year-old Sphinx bug
report at: https://github.com/sphinx-doc/sphinx/issues/2946
Instead of avoiding parallel builds or adding some kind of
locking, I'm using the simplest solution: just using a different
doctree cache for each builder.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20191014150133.14318-1-ehabkost@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Eduardo Habkost [Thu, 22 Aug 2019 22:52:10 +0000 (19:52 -0300)]
i386: Omit all-zeroes entries from KVM CPUID table
KVM has a 80-entry limit at KVM_SET_CPUID2. With the
introduction of CPUID[0x1F], it is now possible to hit this limit
with unusual CPU configurations, e.g.:
$ ./x86_64-softmmu/qemu-system-x86_64 \
-smp 1,dies=2,maxcpus=2 \
-cpu EPYC,check=off,enforce=off \
-machine accel=kvm
qemu-system-x86_64: kvm_init_vcpu failed: Argument list too long
This happens because QEMU adds a lot of all-zeroes CPUID entries
for unused CPUID leaves. In the example above, we end up
creating 48 all-zeroes CPUID entries.
KVM already returns all-zeroes when emulating the CPUID
instruction if an entry is missing, so the all-zeroes entries are
redundant. Skip those entries. This reduces the CPUID table
size by half while keeping CPUID output unchanged.
Bingsong Si [Thu, 22 Aug 2019 04:29:01 +0000 (12:29 +0800)]
i386: Fix legacy guest with xsave panic on host kvm without update cpuid.
without kvm commit 412a3c41, CPUID(EAX=0xd,ECX=0).EBX always equal to 0 even
through guest update xcr0, this will crash legacy guest(e.g., CentOS 6).
Below is the call trace on the guest.
Tao Xu [Thu, 26 Sep 2019 02:10:55 +0000 (10:10 +0800)]
target/i386: drop the duplicated definition of cpuid AVX512_VBMI macro
Drop the duplicated definition of cpuid AVX512_VBMI macro and rename
it as CPUID_7_0_ECX_AVX512_VBMI. Rename CPUID_7_0_ECX_VBMI2 as
CPUID_7_0_ECX_AVX512_VBMI2.
Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190926021055.6970-3-tao3.xu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Tao Xu [Thu, 26 Sep 2019 02:10:54 +0000 (10:10 +0800)]
target/i386: clean up comments over 80 chars per line
Add some comments, clean up comments over 80 chars per line. And there
is an extra line in comment of CPUID_8000_0008_EBX_WBNOINVD, remove
the extra enter and spaces.
Acked-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20190926021055.6970-2-tao3.xu@intel.com>
[ehabkost: rebase to latest git master] Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Wei Yang [Tue, 30 Jul 2019 00:37:40 +0000 (08:37 +0800)]
memory-device: break the loop if tmp exceed the hinted range
The memory-device list built by memory_device_build_list is ordered by
its address, this means if the tmp range exceed the hinted range, all
the following range will not overlap with it.
And this won't change default pc-dimm mapping and address assignment stay
the same as before this change.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20190730003740.20694-3-richardw.yang@linux.intel.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
hw/acpi/piix4: Convert reset handler to DeviceReset
The PIIX4/PM is a PCI device within the PIIX4 chipset, it will be reset
when the PCI bus it stands on is reset.
Convert its reset handler into a proper Device reset method.
Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191010131527.32513-2-philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Igor Mammedov [Fri, 30 Aug 2019 11:07:23 +0000 (07:07 -0400)]
tests: cpu-plug-test: fix device_add for pc/q35 machines
Commit bc1fb850a3 silently broke device_add test for CPU hotplug which
resulted in test successfully passing though it wasn't actually run.
Fix it by making sure that all non present CPUs reported
by "query-hotpluggable-cpus" are hotplugged instead of making up
and hardcoding values.
Use of query-hotpluggable-cpus also allows consolidatiate device_add
cpu testcases and reuse the same test function for all targets.
While at it also add a check that at least one CPU was hotplugged,
to avoid silent breakage in the future.
Igor Mammedov [Fri, 30 Aug 2019 11:07:22 +0000 (07:07 -0400)]
tests: add qtest_qmp_device_add_qdict() helper
Add an API that takes QDict directly, so users could skip steps
of first building json dictionary and converting it back to
QDict in existing qtest_qmp_device_add() and instead use QDict
directly without intermediate conversion.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20190830110723.15096-2-imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Peter Maydell [Tue, 15 Oct 2019 17:15:59 +0000 (18:15 +0100)]
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20191015' into staging
target-arm queue:
* Add Aspeed AST2600 SoC support (but no new board model yet)
* aspeed/wdt: Check correct register for clock source
* bcm2835: code cleanups, better logging, trace events
* implement v2.0 of the Arm semihosting specification
* provide new 'transaction-based' ptimer API and use it
for the Arm devices that use ptimers
* ARM: KVM: support more than 256 CPUs
* remotes/pmaydell/tags/pull-target-arm-20191015: (67 commits)
hw/misc/bcm2835_mbox: Add trace events
hw/arm/bcm2835: Add various unimplemented peripherals
hw/arm/bcm2835: Rename some definitions
hw/arm/bcm2835_peripherals: Name various address spaces
hw/arm/bcm2835_peripherals: Improve logging
hw/arm/raspi: Use the IEC binary prefix definitions
aspeed/soc: Add ASPEED Video stub
aspeed: add support for the Aspeed MII controller of the AST2600
aspeed: Parameterise number of MACs
m25p80: Add support for w25q512jv
aspeed/soc: Add AST2600 support
aspeed: Introduce an object class per SoC
aspeed/i2c: Add AST2600 support
aspeed/i2c: Introduce an object class per SoC
hw/gpio: Add in AST2600 specific implementation
aspeed/smc: Add AST2600 support
aspeed/smc: Introduce segment operations
hw: wdt_aspeed: Add AST2600 support
watchdog/aspeed: Introduce an object class per SoC
aspeed/sdmc: Add AST2600 support
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Properties are structures used for the ARM particular MBOX.
Since one call in bcm2835_property.c concerns the mbox block,
name this trace event in the same bcm2835_mbox* namespace.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190926173428.10713-8-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
hw/arm/bcm2835: Add various unimplemented peripherals
Base addresses and sizes taken from the "BCM2835 ARM Peripherals"
datasheet from February 06 2012:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190926173428.10713-6-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The UART1 is part of the AUX peripheral,
the PCM_CLOCK (yet unimplemented) is part of the CPRMAN.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20190926173428.10713-5-f4bug@amsat.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
projects / mirror_qemu.git / log