[mirror_edk2.git] / ArmPlatformPkg / ArmJunoPkg / ArmJuno.fdf

#\r
#  Copyright (c) 2013-2014, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.BL33_AP_UEFI]\r
BaseAddress   = 0xE0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x000F0000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0xF0\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x000F0000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
  INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf\r
\r
  # NOR Flash driver\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
\r
  # Versatile Express FileSystem\r
  INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # Usb Support\r
  #\r
  INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
  INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf\r
\r
  #\r
  # Networking stack\r
  #\r
  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
  INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf\r
\r
  #\r
  # UEFI applications\r
  #\r
  INF ShellBinPkg/UefiShell/UefiShell.inf\r
\r
  #\r
  # Juno platform driver\r
  #\r
  INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
#\r
# These SEC rules are used for ArmPlatformPkg/PrePi module.\r
# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the\r
# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint\r
#\r
[Rule.ARM.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.AARCH64.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
# A shim specific rule is required to ensure the alignment is 4K.\r
# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)\r
[Rule.ARM.SEC.SHIM]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
9f38945f OM	1	#\r
	2	# Copyright (c) 2013-2014, ARM Limited. All rights reserved.\r
	3	#\r
	4	# This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.BL33_AP_UEFI]\r
	28	BaseAddress = 0xE0000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	29	Size = 0x000F0000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
	34	NumBlocks = 0xF0\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x000F0000\r
	53	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	54	FV = FVMAIN_COMPACT\r
	55	\r
	56	\r
	57	################################################################################\r
	58	#\r
	59	# FV Section\r
	60	#\r
	61	# [FV] section is used to define what components or modules are placed within a flash\r
	62	# device file. This section also defines order the components and modules are positioned\r
	63	# within the image. The [FV] section consists of define statements, set statements and\r
	64	# module statements.\r
65	#\r
66	################################################################################\r
67	\r
68	[FV.FvMain]\r
69	BlockSize = 0x40\r
70	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
71	FvAlignment = 8 # FV alignment and FV attributes setting.\r
72	ERASE_POLARITY = 1\r
73	MEMORY_MAPPED = TRUE\r
74	STICKY_WRITE = TRUE\r
75	LOCK_CAP = TRUE\r
76	LOCK_STATUS = TRUE\r
77	WRITE_DISABLED_CAP = TRUE\r
78	WRITE_ENABLED_CAP = TRUE\r
79	WRITE_STATUS = TRUE\r
80	WRITE_LOCK_CAP = TRUE\r
81	WRITE_LOCK_STATUS = TRUE\r
82	READ_DISABLED_CAP = TRUE\r
83	READ_ENABLED_CAP = TRUE\r
84	READ_STATUS = TRUE\r
85	READ_LOCK_CAP = TRUE\r
86	READ_LOCK_STATUS = TRUE\r
87	\r
88	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
89	\r
90	#\r
91	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
92	#\r
93	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
94	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
95	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
96	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
97	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
98	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
99	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
100	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
101	\r
102	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
103	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
104	\r
105	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
106	\r
107	#\r
108	# Multiple Console IO support\r
109	#\r
110	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
111	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
112	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
113	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
114	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
115	\r
116	INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
117	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
0b4d97a0	118	INF ArmPkg/Drivers/GenericWatchdogDxe/GenericWatchdogDxe.inf\r
9f38945f OM	119	\r
	120	# NOR Flash driver\r
	121	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
	122	\r
	123	# Versatile Express FileSystem\r
	124	INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
	125	\r
	126	#\r
	127	# FAT filesystem + GPT/MBR partitioning\r
	128	#\r
	129	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	130	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	131	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
	132	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	133	\r
	134	#\r
	135	# Usb Support\r
	136	#\r
	137	INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
	138	INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
	139	INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
	140	INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
	141	INF MdeModulePkg/Bus/Usb/UsbMouseDxe/UsbMouseDxe.inf\r
	142	\r
	143	#\r
	144	# Networking stack\r
	145	#\r
	146	INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
	147	INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
	148	INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
	149	INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
	150	INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
	151	INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
	152	INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
	153	INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
	154	INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
	155	INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
	156	INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
	157	INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
	158	INF EmbeddedPkg/Drivers/Lan9118Dxe/Lan9118Dxe.inf\r
	159	\r
	160	#\r
	161	# UEFI applications\r
	162	#\r
	163	INF ShellBinPkg/UefiShell/UefiShell.inf\r
	164	\r
	165	#\r
	166	# Juno platform driver\r
	167	#\r
	168	INF ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.inf\r
	169	\r
	170	#\r
	171	# Bds\r
	172	#\r
	173	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	174	INF ArmPlatformPkg/Bds/Bds.inf\r
	175	\r
	176	[FV.FVMAIN_COMPACT]\r
	177	FvAlignment = 8\r
	178	ERASE_POLARITY = 1\r
	179	MEMORY_MAPPED = TRUE\r
	180	STICKY_WRITE = TRUE\r
	181	LOCK_CAP = TRUE\r
	182	LOCK_STATUS = TRUE\r
183	WRITE_DISABLED_CAP = TRUE\r
184	WRITE_ENABLED_CAP = TRUE\r
185	WRITE_STATUS = TRUE\r
186	WRITE_LOCK_CAP = TRUE\r
187	WRITE_LOCK_STATUS = TRUE\r
188	READ_DISABLED_CAP = TRUE\r
189	READ_ENABLED_CAP = TRUE\r
190	READ_STATUS = TRUE\r
191	READ_LOCK_CAP = TRUE\r
192	READ_LOCK_STATUS = TRUE\r
193	\r
194	INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
195	\r
196	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
197	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
198	SECTION FV_IMAGE = FVMAIN\r
199	}\r
200	}\r
201	\r
202	\r
203	################################################################################\r
204	#\r
205	# Rules are use with the [FV] section's module INF type to define\r
206	# how an FFS file is created for a given INF file. The following Rule are the default\r
207	# rules for the different module type. User can add the customized rules to define the\r
208	# content of the FFS file.\r
209	#\r
210	################################################################################\r
211	\r
212	\r
213	############################################################################\r
214	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
215	############################################################################\r
216	#\r
217	#[Rule.Common.DXE_DRIVER]\r
218	# FILE DRIVER = $(NAMED_GUID) {\r
219	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
220	# COMPRESS PI_STD {\r
221	# GUIDED {\r
222	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
223	# UI STRING="$(MODULE_NAME)" Optional\r
224	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
225	# }\r
226	# }\r
227	# }\r
228	#\r
229	############################################################################\r
230	\r
231	#\r
232	# These SEC rules are used for ArmPlatformPkg/PrePi module.\r
233	# ArmPlatformPkg/PrePi is declared as a SEC module to make GenFv patch the\r
234	# UEFI Firmware to jump to ArmPlatformPkg/PrePi entrypoint\r
235	#\r
236	[Rule.ARM.SEC]\r
237	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
238	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
239	}\r
240	\r
241	[Rule.AARCH64.SEC]\r
242	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
243	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
244	}\r
245	\r
246	# A shim specific rule is required to ensure the alignment is 4K.\r
247	# Otherwise BaseTools pick up the AArch32 alignment (ie: 32)\r
248	[Rule.ARM.SEC.SHIM]\r
249	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
250	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
251	}\r
252	\r
253	[Rule.Common.PEI_CORE]\r
254	FILE PEI_CORE = $(NAMED_GUID) {\r
255	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
256	UI STRING ="$(MODULE_NAME)" Optional\r
257	}\r
258	\r
259	[Rule.Common.PEIM]\r
260	FILE PEIM = $(NAMED_GUID) {\r
261	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
262	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
263	UI STRING="$(MODULE_NAME)" Optional\r
264	}\r
265	\r
266	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
267	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
268	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
269	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
270	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
271	UI STRING="$(MODULE_NAME)" Optional\r
272	}\r
273	}\r
274	\r
275	[Rule.Common.DXE_CORE]\r
276	FILE DXE_CORE = $(NAMED_GUID) {\r
277	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
278	UI STRING="$(MODULE_NAME)" Optional\r
279	}\r
280	\r
281	[Rule.Common.UEFI_DRIVER]\r
282	FILE DRIVER = $(NAMED_GUID) {\r
283	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
284	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
285	UI STRING="$(MODULE_NAME)" Optional\r
286	}\r
287	\r
288	[Rule.Common.DXE_DRIVER]\r
289	FILE DRIVER = $(NAMED_GUID) {\r
290	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
291	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
292	UI STRING="$(MODULE_NAME)" Optional\r
293	}\r
294	\r
295	[Rule.Common.DXE_RUNTIME_DRIVER]\r
296	FILE DRIVER = $(NAMED_GUID) {\r
297	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
298	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
299	UI STRING="$(MODULE_NAME)" Optional\r
300	}\r
301	\r
302	[Rule.Common.UEFI_APPLICATION]\r
303	FILE APPLICATION = $(NAMED_GUID) {\r
304	UI STRING ="$(MODULE_NAME)" Optional\r
305	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
306	}\r
307	\r
308	[Rule.Common.UEFI_DRIVER.BINARY]\r
309	FILE DRIVER = $(NAMED_GUID) {\r
310	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
311	PE32 PE32 \|.efi\r
312	UI STRING="$(MODULE_NAME)" Optional\r
313	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
314	}\r
315	\r
316	[Rule.Common.UEFI_APPLICATION.BINARY]\r
317	FILE APPLICATION = $(NAMED_GUID) {\r
318	PE32 PE32 \|.efi\r
319	UI STRING="$(MODULE_NAME)" Optional\r
320	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
321	}\r