[mirror_edk2.git] / ArmPlatformPkg / ArmPlatformPkg-2ndstage.fdf

#\r
#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.ArmPlatform_EFI]\r
BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00200000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
FvNameGuid         = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  # Simple TextIn/TextOut for UEFI Terminal\r
  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
\r
  #\r
  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF EmbeddedPkg/Ebl/Ebl.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
  # Legacy Linux Loader\r
  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.ARM.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
# The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.\r
# It is the reason 4K is used instead of 2K for the module alignment.\r
[Rule.AARCH64.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 4K                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
Commit	Line	Data
1e57a462	1	#\r
0ead5ec4	2	# Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
1e57a462	3	#\r
6d0ca257 OM	4	# This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
1e57a462	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.ArmPlatform_EFI]\r
	28	BaseAddress = 0xEC200000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	29	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
	34	NumBlocks = 0x200\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x00200000\r
	53	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	54	FV = FVMAIN_COMPACT\r
	55	\r
	56	\r
	57	################################################################################\r
	58	#\r
	59	# FV Section\r
	60	#\r
	61	# [FV] section is used to define what components or modules are placed within a flash\r
	62	# device file. This section also defines order the components and modules are positioned\r
	63	# within the image. The [FV] section consists of define statements, set statements and\r
	64	# module statements.\r
	65	#\r
	66	################################################################################\r
	67	\r
	68	[FV.FvMain]\r
	69	BlockSize = 0x40\r
	70	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
	71	FvAlignment = 8 # FV alignment and FV attributes setting.\r
	72	ERASE_POLARITY = 1\r
	73	MEMORY_MAPPED = TRUE\r
	74	STICKY_WRITE = TRUE\r
75	LOCK_CAP = TRUE\r
76	LOCK_STATUS = TRUE\r
77	WRITE_DISABLED_CAP = TRUE\r
78	WRITE_ENABLED_CAP = TRUE\r
79	WRITE_STATUS = TRUE\r
80	WRITE_LOCK_CAP = TRUE\r
81	WRITE_LOCK_STATUS = TRUE\r
82	READ_DISABLED_CAP = TRUE\r
83	READ_ENABLED_CAP = TRUE\r
84	READ_STATUS = TRUE\r
85	READ_LOCK_CAP = TRUE\r
86	READ_LOCK_STATUS = TRUE\r
e6c51eaf	87	FvNameGuid = 5eda4200-2c5f-43cb-9da3-0baf74b1b30c\r
1e57a462	88	\r
3402aac7	89	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
1e57a462	90	\r
1e57a462	91	#\r
3402aac7	92	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
1e57a462	93	#\r
	94	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
	95	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	96	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	97	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
	98	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
	99	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
	100	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
	101	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
	102	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
	103	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
	104	\r
	105	# Simple TextIn/TextOut for UEFI Terminal\r
	106	INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
3402aac7	107	\r
1e57a462	108	#\r
	109	# Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
	110	#\r
	111	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
3402aac7	112	\r
1e57a462	113	#\r
	114	# FAT filesystem + GPT/MBR partitioning\r
	115	#\r
	116	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	117	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
67fb865c	118	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
1e57a462	119	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
3402aac7 RC	120	\r
	121	#\r
	122	# UEFI application (Shell Embedded Boot Loader)\r
1e57a462	123	#\r
1e57a462	124	INF EmbeddedPkg/Ebl/Ebl.inf\r
3402aac7	125	\r
1e57a462	126	#\r
	127	# Bds\r
	128	#\r
	129	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	130	INF ArmPlatformPkg/Bds/Bds.inf\r
	131	\r
0ead5ec4 RC	132	# Legacy Linux Loader\r
0ead5ec4 RC	133	INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
1e57a462	134	\r
	135	[FV.FVMAIN_COMPACT]\r
	136	FvAlignment = 8\r
	137	ERASE_POLARITY = 1\r
	138	MEMORY_MAPPED = TRUE\r
	139	STICKY_WRITE = TRUE\r
	140	LOCK_CAP = TRUE\r
	141	LOCK_STATUS = TRUE\r
	142	WRITE_DISABLED_CAP = TRUE\r
	143	WRITE_ENABLED_CAP = TRUE\r
	144	WRITE_STATUS = TRUE\r
	145	WRITE_LOCK_CAP = TRUE\r
	146	WRITE_LOCK_STATUS = TRUE\r
	147	READ_DISABLED_CAP = TRUE\r
	148	READ_ENABLED_CAP = TRUE\r
	149	READ_STATUS = TRUE\r
	150	READ_LOCK_CAP = TRUE\r
	151	READ_LOCK_STATUS = TRUE\r
	152	\r
	153	INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
3402aac7	154	\r
1e57a462	155	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	156	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	157	SECTION FV_IMAGE = FVMAIN\r
	158	}\r
	159	}\r
	160	\r
	161	\r
	162	################################################################################\r
	163	#\r
	164	# Rules are use with the [FV] section's module INF type to define\r
	165	# how an FFS file is created for a given INF file. The following Rule are the default\r
	166	# rules for the different module type. User can add the customized rules to define the\r
	167	# content of the FFS file.\r
	168	#\r
	169	################################################################################\r
	170	\r
	171	\r
	172	############################################################################\r
3402aac7	173	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
1e57a462	174	############################################################################\r
	175	#\r
	176	#[Rule.Common.DXE_DRIVER]\r
	177	# FILE DRIVER = $(NAMED_GUID) {\r
	178	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	179	# COMPRESS PI_STD {\r
	180	# GUIDED {\r
	181	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	182	# UI STRING="$(MODULE_NAME)" Optional\r
	183	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	184	# }\r
	185	# }\r
	186	# }\r
	187	#\r
	188	############################################################################\r
	189	\r
6d0ca257	190	[Rule.ARM.SEC]\r
1e57a462	191	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	192	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	193	}\r
	194	\r
6d0ca257 OM	195	# The AArch64 Vector Table requires a 2K alignment that is not supported by the FDF specification.\r
	196	# It is the reason 4K is used instead of 2K for the module alignment.\r
	197	[Rule.AARCH64.SEC]\r
	198	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	199	TE TE Align = 4K $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	200	}\r
	201	\r
1e57a462	202	[Rule.Common.PEI_CORE]\r
	203	FILE PEI_CORE = $(NAMED_GUID) {\r
	204	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
febad023	205	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	206	}\r
	207	\r
	208	[Rule.Common.PEIM]\r
	209	FILE PEIM = $(NAMED_GUID) {\r
	210	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	211	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
febad023	212	UI STRING="$(MODULE_NAME)" Optional\r
1e57a462	213	}\r
	214	\r
	215	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
	216	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
	217	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	218	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
	219	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	220	UI STRING="$(MODULE_NAME)" Optional\r
	221	}\r
	222	}\r
	223	\r
	224	[Rule.Common.DXE_CORE]\r
	225	FILE DXE_CORE = $(NAMED_GUID) {\r
	226	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	227	UI STRING="$(MODULE_NAME)" Optional\r
	228	}\r
	229	\r
	230	[Rule.Common.UEFI_DRIVER]\r
	231	FILE DRIVER = $(NAMED_GUID) {\r
	232	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	233	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	234	UI STRING="$(MODULE_NAME)" Optional\r
	235	}\r
	236	\r
67fb865c	237	[Rule.Common.UEFI_DRIVER.BINARY]\r
	238	FILE DRIVER = $(NAMED_GUID) {\r
	239	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	240	PE32 PE32 \|.efi\r
	241	UI STRING="$(MODULE_NAME)" Optional\r
	242	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	243	}\r
	244	\r
1e57a462	245	[Rule.Common.DXE_DRIVER]\r
	246	FILE DRIVER = $(NAMED_GUID) {\r
	247	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	248	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	249	UI STRING="$(MODULE_NAME)" Optional\r
	250	}\r
	251	\r
	252	[Rule.Common.DXE_RUNTIME_DRIVER]\r
	253	FILE DRIVER = $(NAMED_GUID) {\r
	254	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	255	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	256	UI STRING="$(MODULE_NAME)" Optional\r
	257	}\r
	258	\r
	259	[Rule.Common.UEFI_APPLICATION]\r
	260	FILE APPLICATION = $(NAMED_GUID) {\r
3402aac7	261	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	262	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
1e57a462	263	}\r