[mirror_edk2.git] / ArmPlatformPkg / ArmPlatformPkg-2ndstage.fdf

#\r
#  Copyright (c) 2011, ARM Limited. All rights reserved.\r
#  \r
#  This program and the accompanying materials                          \r
#  are licensed and made available under the terms and conditions of the BSD License         \r
#  which accompanies this distribution.  The full text of the license may be found at        \r
#  http://opensource.org/licenses/bsd-license.php                                            \r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.ArmPlatform_EFI]\r
BaseAddress   = 0xEC200000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00200000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services) \r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  # Simple TextIn/TextOut for UEFI Terminal\r
  INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
  \r
  #\r
  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
  \r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
  \r
  #\r
  # UEFI application (Shell Embedded Boot Loader) \r
  #  \r
  INF EmbeddedPkg/Ebl/Ebl.inf\r
    \r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
  \r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # \r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
Commit	Line	Data
1e57a462	1	#\r
	2	# Copyright (c) 2011, ARM Limited. All rights reserved.\r
	3	# \r
	4	# This program and the accompanying materials \r
	5	# are licensed and made available under the terms and conditions of the BSD License \r
	6	# which accompanies this distribution. The full text of the license may be found at \r
	7	# http://opensource.org/licenses/bsd-license.php \r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.ArmPlatform_EFI]\r
	28	BaseAddress = 0xEC200000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	29	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
	34	NumBlocks = 0x200\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x00200000\r
	53	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	54	FV = FVMAIN_COMPACT\r
	55	\r
	56	\r
	57	################################################################################\r
	58	#\r
	59	# FV Section\r
	60	#\r
	61	# [FV] section is used to define what components or modules are placed within a flash\r
	62	# device file. This section also defines order the components and modules are positioned\r
	63	# within the image. The [FV] section consists of define statements, set statements and\r
	64	# module statements.\r
65	#\r
66	################################################################################\r
67	\r
68	[FV.FvMain]\r
69	BlockSize = 0x40\r
70	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
71	FvAlignment = 8 # FV alignment and FV attributes setting.\r
72	ERASE_POLARITY = 1\r
73	MEMORY_MAPPED = TRUE\r
74	STICKY_WRITE = TRUE\r
75	LOCK_CAP = TRUE\r
76	LOCK_STATUS = TRUE\r
77	WRITE_DISABLED_CAP = TRUE\r
78	WRITE_ENABLED_CAP = TRUE\r
79	WRITE_STATUS = TRUE\r
80	WRITE_LOCK_CAP = TRUE\r
81	WRITE_LOCK_STATUS = TRUE\r
82	READ_DISABLED_CAP = TRUE\r
83	READ_ENABLED_CAP = TRUE\r
84	READ_STATUS = TRUE\r
85	READ_LOCK_CAP = TRUE\r
86	READ_LOCK_STATUS = TRUE\r
87	\r
88	INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
89	\r
90	#\r
91	# PI DXE Drivers producing Architectural Protocols (EFI Services) \r
92	#\r
93	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
94	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
95	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
96	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
97	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
98	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
99	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
100	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
101	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
102	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
103	\r
104	# Simple TextIn/TextOut for UEFI Terminal\r
105	INF EmbeddedPkg/SimpleTextInOutSerial/SimpleTextInOutSerial.inf\r
106	\r
107	#\r
108	# Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
109	#\r
110	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
111	\r
112	#\r
113	# FAT filesystem + GPT/MBR partitioning\r
114	#\r
115	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
116	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
117	INF FatPkg/EnhancedFatDxe/Fat.inf\r
118	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
119	\r
120	#\r
121	# UEFI application (Shell Embedded Boot Loader) \r
122	# \r
123	INF EmbeddedPkg/Ebl/Ebl.inf\r
124	\r
125	#\r
126	# Bds\r
127	#\r
128	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
129	INF ArmPlatformPkg/Bds/Bds.inf\r
130	\r
131	\r
132	[FV.FVMAIN_COMPACT]\r
133	FvAlignment = 8\r
134	ERASE_POLARITY = 1\r
135	MEMORY_MAPPED = TRUE\r
136	STICKY_WRITE = TRUE\r
137	LOCK_CAP = TRUE\r
138	LOCK_STATUS = TRUE\r
139	WRITE_DISABLED_CAP = TRUE\r
140	WRITE_ENABLED_CAP = TRUE\r
141	WRITE_STATUS = TRUE\r
142	WRITE_LOCK_CAP = TRUE\r
143	WRITE_LOCK_STATUS = TRUE\r
144	READ_DISABLED_CAP = TRUE\r
145	READ_ENABLED_CAP = TRUE\r
146	READ_STATUS = TRUE\r
147	READ_LOCK_CAP = TRUE\r
148	READ_LOCK_STATUS = TRUE\r
149	\r
150	INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
151	\r
152	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
153	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
154	SECTION FV_IMAGE = FVMAIN\r
155	}\r
156	}\r
157	\r
158	\r
159	################################################################################\r
160	#\r
161	# Rules are use with the [FV] section's module INF type to define\r
162	# how an FFS file is created for a given INF file. The following Rule are the default\r
163	# rules for the different module type. User can add the customized rules to define the\r
164	# content of the FFS file.\r
165	#\r
166	################################################################################\r
167	\r
168	\r
169	############################################################################\r
170	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
171	############################################################################\r
172	#\r
173	#[Rule.Common.DXE_DRIVER]\r
174	# FILE DRIVER = $(NAMED_GUID) {\r
175	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
176	# COMPRESS PI_STD {\r
177	# GUIDED {\r
178	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
179	# UI STRING="$(MODULE_NAME)" Optional\r
180	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
181	# }\r
182	# }\r
183	# }\r
184	#\r
185	############################################################################\r
186	\r
187	[Rule.Common.SEC]\r
188	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
189	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
190	}\r
191	\r
192	[Rule.Common.PEI_CORE]\r
193	FILE PEI_CORE = $(NAMED_GUID) {\r
194	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
195	UI STRING ="$(MODULE_NAME)" Optional \r
196	}\r
197	\r
198	[Rule.Common.PEIM]\r
199	FILE PEIM = $(NAMED_GUID) {\r
200	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
201	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
202	UI STRING="$(MODULE_NAME)" Optional \r
203	}\r
204	\r
205	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
206	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
207	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
208	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
209	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
210	UI STRING="$(MODULE_NAME)" Optional\r
211	}\r
212	}\r
213	\r
214	[Rule.Common.DXE_CORE]\r
215	FILE DXE_CORE = $(NAMED_GUID) {\r
216	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
217	UI STRING="$(MODULE_NAME)" Optional\r
218	}\r
219	\r
220	[Rule.Common.UEFI_DRIVER]\r
221	FILE DRIVER = $(NAMED_GUID) {\r
222	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
223	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
224	UI STRING="$(MODULE_NAME)" Optional\r
225	}\r
226	\r
227	[Rule.Common.DXE_DRIVER]\r
228	FILE DRIVER = $(NAMED_GUID) {\r
229	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
230	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
231	UI STRING="$(MODULE_NAME)" Optional\r
232	}\r
233	\r
234	[Rule.Common.DXE_RUNTIME_DRIVER]\r
235	FILE DRIVER = $(NAMED_GUID) {\r
236	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
237	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
238	UI STRING="$(MODULE_NAME)" Optional\r
239	}\r
240	\r
241	[Rule.Common.UEFI_APPLICATION]\r
242	FILE APPLICATION = $(NAMED_GUID) {\r
243	UI STRING ="$(MODULE_NAME)" Optional \r
244	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
245	}\r