[mirror_edk2.git] / ArmPlatformPkg / ArmRealViewEbPkg / ArmRealViewEb-RTSM-MPCore.fdf

# FLASH layout file for ARM RealView EB.\r
#\r
#  Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
\r
[FD.ArmRealViewEb_EFI]\r
BaseAddress   = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize\r
ErasePolarity = 1\r
BlockSize     = 0x00010000\r
NumBlocks     = 0x20\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00050000\r
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
FV = FVMAIN_SEC\r
\r
0x00050000|0x00150000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FVMAIN_SEC]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/Sec/Sec.inf\r
\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
FvNameGuid         = 14801114-da6a-4113-985b-dc876337a15e\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
\r
  #\r
  # Semi-hosting filesystem\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
\r
  #\r
  # Multimedia Card Interface\r
  #\r
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
  INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
\r
  # FV Filesystem\r
  INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF ShellBinPkg/UefiShell/UefiShell.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
  # Legacy Linux Loader\r
  INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
!if $(EDK2_SKIP_PEICORE) == 1\r
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
!else\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
!endif\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
9e2e89f0	1	# FLASH layout file for ARM RealView EB.\r
1e57a462	2	#\r
0ead5ec4	3	# Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
1e57a462	4	#\r
3402aac7 RC	5	# This program and the accompanying materials\r
	6	# are licensed and made available under the terms and conditions of the BSD License\r
	7	# which accompanies this distribution. The full text of the license may be found at\r
	8	# http://opensource.org/licenses/bsd-license.php\r
	9	#\r
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
1e57a462	12	#\r
	13	\r
	14	################################################################################\r
	15	#\r
	16	# FD Section\r
	17	# The [FD] Section is made up of the definition statements and a\r
	18	# description of what goes into the Flash Device Image. Each FD section\r
	19	# defines one flash "device" image. A flash device image may be one of\r
	20	# the following: Removable media bootable image (like a boot floppy\r
	21	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	22	# card,) a System "Flash" image (that would be burned into a system's\r
	23	# flash) or an Update ("Capsule") image that will be used to update and\r
	24	# existing system flash.\r
	25	#\r
	26	################################################################################\r
	27	\r
	28	\r
	29	[FD.ArmRealViewEb_EFI]\r
	30	BaseAddress = 0x40000000\|gArmTokenSpaceGuid.PcdFdBaseAddress\r
55b0a24a	31	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize\r
1e57a462	32	ErasePolarity = 1\r
1e57a462	33	BlockSize = 0x00010000\r
55b0a24a	34	NumBlocks = 0x20\r
1e57a462	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x00050000\r
	53	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize\r
	54	FV = FVMAIN_SEC\r
	55	\r
55b0a24a	56	0x00050000\|0x00150000\r
1e57a462	57	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	58	FV = FVMAIN_COMPACT\r
	59	\r
	60	################################################################################\r
	61	#\r
	62	# FV Section\r
	63	#\r
	64	# [FV] section is used to define what components or modules are placed within a flash\r
	65	# device file. This section also defines order the components and modules are positioned\r
	66	# within the image. The [FV] section consists of define statements, set statements and\r
	67	# module statements.\r
	68	#\r
	69	################################################################################\r
	70	\r
	71	[FV.FVMAIN_SEC]\r
	72	FvAlignment = 8\r
	73	ERASE_POLARITY = 1\r
	74	MEMORY_MAPPED = TRUE\r
	75	STICKY_WRITE = TRUE\r
	76	LOCK_CAP = TRUE\r
	77	LOCK_STATUS = TRUE\r
	78	WRITE_DISABLED_CAP = TRUE\r
	79	WRITE_ENABLED_CAP = TRUE\r
	80	WRITE_STATUS = TRUE\r
	81	WRITE_LOCK_CAP = TRUE\r
	82	WRITE_LOCK_STATUS = TRUE\r
	83	READ_DISABLED_CAP = TRUE\r
	84	READ_ENABLED_CAP = TRUE\r
	85	READ_STATUS = TRUE\r
	86	READ_LOCK_CAP = TRUE\r
	87	READ_LOCK_STATUS = TRUE\r
	88	\r
	89	INF ArmPlatformPkg/Sec/Sec.inf\r
	90	\r
	91	\r
	92	[FV.FvMain]\r
	93	BlockSize = 0x40\r
	94	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
	95	FvAlignment = 8 # FV alignment and FV attributes setting.\r
	96	ERASE_POLARITY = 1\r
	97	MEMORY_MAPPED = TRUE\r
	98	STICKY_WRITE = TRUE\r
	99	LOCK_CAP = TRUE\r
	100	LOCK_STATUS = TRUE\r
	101	WRITE_DISABLED_CAP = TRUE\r
	102	WRITE_ENABLED_CAP = TRUE\r
	103	WRITE_STATUS = TRUE\r
	104	WRITE_LOCK_CAP = TRUE\r
	105	WRITE_LOCK_STATUS = TRUE\r
	106	READ_DISABLED_CAP = TRUE\r
	107	READ_ENABLED_CAP = TRUE\r
	108	READ_STATUS = TRUE\r
	109	READ_LOCK_CAP = TRUE\r
	110	READ_LOCK_STATUS = TRUE\r
e6c51eaf	111	FvNameGuid = 14801114-da6a-4113-985b-dc876337a15e\r
1e57a462	112	\r
3402aac7	113	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
1e57a462	114	\r
1e57a462	115	#\r
3402aac7	116	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
1e57a462	117	#\r
	118	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
	119	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	120	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	121	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
	122	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
	123	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
	124	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
	125	INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
	126	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
	127	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
	128	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
	129	\r
	130	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
	131	INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
	132	\r
	133	#\r
	134	# Multiple Console IO support\r
	135	#\r
	136	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
	137	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
	138	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
	139	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
	140	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
3402aac7	141	\r
017baa1c	142	INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
1e57a462	143	INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
3402aac7	144	\r
1e57a462	145	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
	146	\r
	147	#\r
	148	# Semi-hosting filesystem\r
	149	#\r
	150	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
b0824968 OM	151	\r
	152	#\r
	153	# Multimedia Card Interface\r
	154	#\r
	155	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
	156	INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
	157	\r
439a5321 OM	158	# FV Filesystem\r
	159	INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
	160	\r
1e57a462	161	#\r
	162	# FAT filesystem + GPT/MBR partitioning\r
	163	#\r
	164	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	165	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	166	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
	167	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	168	\r
	169	#\r
3402aac7 RC	170	# UEFI application (Shell Embedded Boot Loader)\r
	171	#\r
	172	INF ShellBinPkg/UefiShell/UefiShell.inf\r
1e57a462	173	\r
	174	#\r
	175	# Bds\r
	176	#\r
	177	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	178	INF ArmPlatformPkg/Bds/Bds.inf\r
	179	\r
0ead5ec4 RC	180	# Legacy Linux Loader\r
0ead5ec4 RC	181	INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
1e57a462	182	\r
	183	[FV.FVMAIN_COMPACT]\r
	184	FvAlignment = 8\r
	185	ERASE_POLARITY = 1\r
	186	MEMORY_MAPPED = TRUE\r
	187	STICKY_WRITE = TRUE\r
	188	LOCK_CAP = TRUE\r
	189	LOCK_STATUS = TRUE\r
	190	WRITE_DISABLED_CAP = TRUE\r
	191	WRITE_ENABLED_CAP = TRUE\r
	192	WRITE_STATUS = TRUE\r
	193	WRITE_LOCK_CAP = TRUE\r
	194	WRITE_LOCK_STATUS = TRUE\r
	195	READ_DISABLED_CAP = TRUE\r
	196	READ_ENABLED_CAP = TRUE\r
	197	READ_STATUS = TRUE\r
	198	READ_LOCK_CAP = TRUE\r
	199	READ_LOCK_STATUS = TRUE\r
	200	\r
	201	!if $(EDK2_SKIP_PEICORE) == 1\r
	202	INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
	203	!else\r
	204	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
	205	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	206	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
	207	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
	208	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
	209	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	210	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
	211	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	212	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
	213	!endif\r
	214	\r
	215	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	216	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	217	SECTION FV_IMAGE = FVMAIN\r
	218	}\r
	219	}\r
	220	\r
	221	################################################################################\r
	222	#\r
	223	# Rules are use with the [FV] section's module INF type to define\r
	224	# how an FFS file is created for a given INF file. The following Rule are the default\r
	225	# rules for the different module type. User can add the customized rules to define the\r
	226	# content of the FFS file.\r
	227	#\r
	228	################################################################################\r
	229	\r
	230	\r
	231	############################################################################\r
3402aac7	232	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
1e57a462	233	############################################################################\r
	234	#\r
	235	#[Rule.Common.DXE_DRIVER]\r
	236	# FILE DRIVER = $(NAMED_GUID) {\r
	237	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	238	# COMPRESS PI_STD {\r
	239	# GUIDED {\r
	240	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	241	# UI STRING="$(MODULE_NAME)" Optional\r
	242	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	243	# }\r
	244	# }\r
	245	# }\r
	246	#\r
	247	############################################################################\r
	248	\r
	249	[Rule.Common.SEC]\r
	250	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
	251	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	252	}\r
	253	\r
	254	[Rule.Common.PEI_CORE]\r
	255	FILE PEI_CORE = $(NAMED_GUID) {\r
	256	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
3402aac7	257	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	258	}\r
	259	\r
	260	[Rule.Common.PEIM]\r
	261	FILE PEIM = $(NAMED_GUID) {\r
	262	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	263	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
3402aac7	264	UI STRING="$(MODULE_NAME)" Optional\r
1e57a462	265	}\r
	266	\r
	267	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
	268	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
	269	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	270	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
	271	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	272	UI STRING="$(MODULE_NAME)" Optional\r
	273	}\r
	274	}\r
	275	\r
	276	[Rule.Common.DXE_CORE]\r
	277	FILE DXE_CORE = $(NAMED_GUID) {\r
	278	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	279	UI STRING="$(MODULE_NAME)" Optional\r
	280	}\r
	281	\r
	282	[Rule.Common.UEFI_DRIVER]\r
	283	FILE DRIVER = $(NAMED_GUID) {\r
	284	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	285	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	286	UI STRING="$(MODULE_NAME)" Optional\r
	287	}\r
	288	\r
	289	[Rule.Common.DXE_DRIVER]\r
	290	FILE DRIVER = $(NAMED_GUID) {\r
	291	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	292	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	293	UI STRING="$(MODULE_NAME)" Optional\r
	294	}\r
	295	\r
	296	[Rule.Common.DXE_RUNTIME_DRIVER]\r
	297	FILE DRIVER = $(NAMED_GUID) {\r
	298	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	299	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	300	UI STRING="$(MODULE_NAME)" Optional\r
	301	}\r
	302	\r
	303	[Rule.Common.UEFI_APPLICATION]\r
	304	FILE APPLICATION = $(NAMED_GUID) {\r
3402aac7	305	UI STRING ="$(MODULE_NAME)" Optional\r
1e57a462	306	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
	307	}\r
	308	\r
	309	[Rule.Common.UEFI_DRIVER.BINARY]\r
	310	FILE DRIVER = $(NAMED_GUID) {\r
	311	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	312	PE32 PE32 \|.efi\r
	313	UI STRING="$(MODULE_NAME)" Optional\r
	314	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	315	}\r
	316	\r
	317	[Rule.Common.UEFI_APPLICATION.BINARY]\r
	318	FILE APPLICATION = $(NAMED_GUID) {\r
	319	PE32 PE32 \|.efi\r
	320	UI STRING="$(MODULE_NAME)" Optional\r
	321	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	322	}\r