[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / ArmVExpress-CTA9x4.fdf

# FLASH layout file for ARM VE.\r
#\r
#  Copyright (c) 2011, ARM Limited. All rights reserved.\r
#  \r
#  This program and the accompanying materials                          \r
#  are licensed and made available under the terms and conditions of the BSD License         \r
#  which accompanies this distribution.  The full text of the license may be found at        \r
#  http://opensource.org/licenses/bsd-license.php                                            \r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.Sec_ArmVExpress_EFI]\r
BaseAddress   = 0x44000000|gArmTokenSpaceGuid.PcdSecureFdBaseAddress  #The base address of the Secure FLASH Device.\r
Size          = 0x00080000|gArmTokenSpaceGuid.PcdSecureFdSize         #The size in bytes of the Secure FLASH Device\r
ErasePolarity = 1\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x80\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00080000\r
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
FV = FVMAIN_SEC\r
\r
\r
[FD.ArmVExpress_EFI]\r
!if $(EDK2_ARMVE_STANDALONE) == 1\r
BaseAddress   = 0x45000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
!else\r
BaseAddress   = 0x80000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in remapped DRAM.\r
!endif\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00200000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FVMAIN_SEC]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/Sec/Sec.inf\r
\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services) \r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf\r
  INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
  INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf\r
\r
  #\r
\r
!if $(EDK2_ARMVE_STANDALONE) != 1\r
  #\r
  # Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
!endif\r
  \r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # Multimedia Card Interface\r
  #\r
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
  INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
  \r
  #\r
  # UEFI application (Shell Embedded Boot Loader) \r
  #  \r
  INF ShellBinPkg/UefiShell/UefiShell.inf \r
    \r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
!if $(EDK2_SKIP_PEICORE) == 1\r
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
!else\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
!endif\r
  \r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # \r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
66f530ed	1	# FLASH layout file for ARM VE.\r
	2	#\r
	3	# Copyright (c) 2011, ARM Limited. All rights reserved.\r
	4	# \r
	5	# This program and the accompanying materials \r
	6	# are licensed and made available under the terms and conditions of the BSD License \r
	7	# which accompanies this distribution. The full text of the license may be found at \r
	8	# http://opensource.org/licenses/bsd-license.php \r
	9	#\r
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
	12	#\r
	13	\r
	14	################################################################################\r
	15	#\r
	16	# FD Section\r
	17	# The [FD] Section is made up of the definition statements and a\r
	18	# description of what goes into the Flash Device Image. Each FD section\r
	19	# defines one flash "device" image. A flash device image may be one of\r
	20	# the following: Removable media bootable image (like a boot floppy\r
	21	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	22	# card,) a System "Flash" image (that would be burned into a system's\r
	23	# flash) or an Update ("Capsule") image that will be used to update and\r
	24	# existing system flash.\r
	25	#\r
	26	################################################################################\r
	27	\r
	28	[FD.Sec_ArmVExpress_EFI]\r
	29	BaseAddress = 0x44000000\|gArmTokenSpaceGuid.PcdSecureFdBaseAddress #The base address of the Secure FLASH Device.\r
	30	Size = 0x00080000\|gArmTokenSpaceGuid.PcdSecureFdSize #The size in bytes of the Secure FLASH Device\r
	31	ErasePolarity = 1\r
	32	BlockSize = 0x00001000\r
	33	NumBlocks = 0x80\r
	34	\r
	35	################################################################################\r
	36	#\r
	37	# Following are lists of FD Region layout which correspond to the locations of different\r
	38	# images within the flash device.\r
	39	#\r
	40	# Regions must be defined in ascending order and may not overlap.\r
	41	#\r
	42	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	43	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	44	# "0x" characters. Like:\r
	45	# Offset\|Size\r
	46	# PcdOffsetCName\|PcdSizeCName\r
	47	# RegionType <FV, DATA, or FILE>\r
	48	#\r
	49	################################################################################\r
	50	\r
	51	0x00000000\|0x00080000\r
ce5ed6c8	52	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize\r
66f530ed	53	FV = FVMAIN_SEC\r
	54	\r
	55	\r
	56	[FD.ArmVExpress_EFI]\r
	57	!if $(EDK2_ARMVE_STANDALONE) == 1\r
	58	BaseAddress = 0x45000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
	59	!else\r
	60	BaseAddress = 0x80000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in remapped DRAM.\r
	61	!endif\r
	62	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	63	ErasePolarity = 1\r
	64	\r
	65	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	66	BlockSize = 0x00001000\r
	67	NumBlocks = 0x200\r
	68	\r
	69	################################################################################\r
	70	#\r
	71	# Following are lists of FD Region layout which correspond to the locations of different\r
	72	# images within the flash device.\r
	73	#\r
	74	# Regions must be defined in ascending order and may not overlap.\r
	75	#\r
	76	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	77	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	78	# "0x" characters. Like:\r
	79	# Offset\|Size\r
	80	# PcdOffsetCName\|PcdSizeCName\r
	81	# RegionType <FV, DATA, or FILE>\r
	82	#\r
	83	################################################################################\r
	84	\r
	85	0x00000000\|0x00200000\r
ce5ed6c8	86	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
66f530ed	87	FV = FVMAIN_COMPACT\r
	88	\r
	89	\r
	90	################################################################################\r
	91	#\r
	92	# FV Section\r
	93	#\r
	94	# [FV] section is used to define what components or modules are placed within a flash\r
	95	# device file. This section also defines order the components and modules are positioned\r
	96	# within the image. The [FV] section consists of define statements, set statements and\r
	97	# module statements.\r
	98	#\r
	99	################################################################################\r
	100	\r
	101	[FV.FVMAIN_SEC]\r
	102	FvAlignment = 8\r
	103	ERASE_POLARITY = 1\r
	104	MEMORY_MAPPED = TRUE\r
	105	STICKY_WRITE = TRUE\r
	106	LOCK_CAP = TRUE\r
	107	LOCK_STATUS = TRUE\r
	108	WRITE_DISABLED_CAP = TRUE\r
	109	WRITE_ENABLED_CAP = TRUE\r
	110	WRITE_STATUS = TRUE\r
	111	WRITE_LOCK_CAP = TRUE\r
	112	WRITE_LOCK_STATUS = TRUE\r
	113	READ_DISABLED_CAP = TRUE\r
	114	READ_ENABLED_CAP = TRUE\r
	115	READ_STATUS = TRUE\r
	116	READ_LOCK_CAP = TRUE\r
	117	READ_LOCK_STATUS = TRUE\r
	118	\r
	119	INF ArmPlatformPkg/Sec/Sec.inf\r
	120	\r
	121	\r
	122	[FV.FvMain]\r
	123	BlockSize = 0x40\r
	124	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
	125	FvAlignment = 8 # FV alignment and FV attributes setting.\r
	126	ERASE_POLARITY = 1\r
	127	MEMORY_MAPPED = TRUE\r
	128	STICKY_WRITE = TRUE\r
	129	LOCK_CAP = TRUE\r
	130	LOCK_STATUS = TRUE\r
	131	WRITE_DISABLED_CAP = TRUE\r
	132	WRITE_ENABLED_CAP = TRUE\r
	133	WRITE_STATUS = TRUE\r
	134	WRITE_LOCK_CAP = TRUE\r
	135	WRITE_LOCK_STATUS = TRUE\r
	136	READ_DISABLED_CAP = TRUE\r
	137	READ_ENABLED_CAP = TRUE\r
	138	READ_STATUS = TRUE\r
	139	READ_LOCK_CAP = TRUE\r
	140	READ_LOCK_STATUS = TRUE\r
	141	\r
	142	INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
	143	\r
	144	#\r
	145	# PI DXE Drivers producing Architectural Protocols (EFI Services) \r
	146	#\r
	147	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
	148	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
	149	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
	150	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
151	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
152	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
153	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
154	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
155	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
156	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
157	\r
158	#\r
159	# Multiple Console IO support\r
160	#\r
161	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
162	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
163	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
164	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
165	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
166	\r
167	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
168	\r
169	INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf\r
170	INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
171	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
172	INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
173	INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf\r
174	\r
175	#\r
176	\r
177	!if $(EDK2_ARMVE_STANDALONE) != 1\r
178	#\r
179	# Semi-hosting filesystem (Required the Hardware Debugger to be connected)\r
180	#\r
181	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
182	!endif\r
183	\r
184	#\r
185	# FAT filesystem + GPT/MBR partitioning\r
186	#\r
187	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
188	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
e1772adf	189	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
66f530ed	190	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	191	\r
	192	#\r
	193	# Multimedia Card Interface\r
	194	#\r
	195	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
	196	INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
	197	\r
	198	#\r
	199	# UEFI application (Shell Embedded Boot Loader) \r
	200	# \r
e1772adf	201	INF ShellBinPkg/UefiShell/UefiShell.inf \r
66f530ed	202	\r
66f530ed	203	#\r
	204	# Bds\r
	205	#\r
	206	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	207	INF ArmPlatformPkg/Bds/Bds.inf\r
	208	\r
	209	\r
	210	[FV.FVMAIN_COMPACT]\r
	211	FvAlignment = 8\r
	212	ERASE_POLARITY = 1\r
	213	MEMORY_MAPPED = TRUE\r
	214	STICKY_WRITE = TRUE\r
	215	LOCK_CAP = TRUE\r
	216	LOCK_STATUS = TRUE\r
	217	WRITE_DISABLED_CAP = TRUE\r
	218	WRITE_ENABLED_CAP = TRUE\r
	219	WRITE_STATUS = TRUE\r
	220	WRITE_LOCK_CAP = TRUE\r
	221	WRITE_LOCK_STATUS = TRUE\r
	222	READ_DISABLED_CAP = TRUE\r
	223	READ_ENABLED_CAP = TRUE\r
	224	READ_STATUS = TRUE\r
	225	READ_LOCK_CAP = TRUE\r
	226	READ_LOCK_STATUS = TRUE\r
	227	\r
	228	!if $(EDK2_SKIP_PEICORE) == 1\r
	229	INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
	230	!else\r
	231	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
	232	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	233	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
	234	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
	235	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
	236	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	237	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
	238	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	239	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
	240	!endif\r
	241	\r
	242	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	243	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	244	SECTION FV_IMAGE = FVMAIN\r
	245	}\r
	246	}\r
	247	\r
	248	\r
	249	################################################################################\r
	250	#\r
	251	# Rules are use with the [FV] section's module INF type to define\r
	252	# how an FFS file is created for a given INF file. The following Rule are the default\r
	253	# rules for the different module type. User can add the customized rules to define the\r
	254	# content of the FFS file.\r
	255	#\r
	256	################################################################################\r
	257	\r
	258	\r
	259	############################################################################\r
	260	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
	261	############################################################################\r
	262	#\r
	263	#[Rule.Common.DXE_DRIVER]\r
	264	# FILE DRIVER = $(NAMED_GUID) {\r
	265	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
	266	# COMPRESS PI_STD {\r
267	# GUIDED {\r
268	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
269	# UI STRING="$(MODULE_NAME)" Optional\r
270	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
271	# }\r
272	# }\r
273	# }\r
274	#\r
275	############################################################################\r
276	\r
277	[Rule.Common.SEC]\r
278	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
279	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
280	}\r
281	\r
282	[Rule.Common.PEI_CORE]\r
283	FILE PEI_CORE = $(NAMED_GUID) {\r
284	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
285	UI STRING ="$(MODULE_NAME)" Optional \r
286	}\r
287	\r
288	[Rule.Common.PEIM]\r
289	FILE PEIM = $(NAMED_GUID) {\r
290	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
291	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
292	UI STRING="$(MODULE_NAME)" Optional \r
293	}\r
294	\r
295	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
296	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
297	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
298	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
299	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
300	UI STRING="$(MODULE_NAME)" Optional\r
301	}\r
302	}\r
303	\r
304	[Rule.Common.DXE_CORE]\r
305	FILE DXE_CORE = $(NAMED_GUID) {\r
306	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
307	UI STRING="$(MODULE_NAME)" Optional\r
308	}\r
309	\r
310	[Rule.Common.UEFI_DRIVER]\r
311	FILE DRIVER = $(NAMED_GUID) {\r
312	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
313	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
314	UI STRING="$(MODULE_NAME)" Optional\r
315	}\r
316	\r
317	[Rule.Common.DXE_DRIVER]\r
318	FILE DRIVER = $(NAMED_GUID) {\r
319	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
320	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
321	UI STRING="$(MODULE_NAME)" Optional\r
322	}\r
323	\r
324	[Rule.Common.DXE_RUNTIME_DRIVER]\r
325	FILE DRIVER = $(NAMED_GUID) {\r
326	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
327	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
328	UI STRING="$(MODULE_NAME)" Optional\r
329	}\r
330	\r
331	[Rule.Common.UEFI_APPLICATION]\r
332	FILE APPLICATION = $(NAMED_GUID) {\r
333	UI STRING ="$(MODULE_NAME)" Optional \r
334	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
335	}\r
e1772adf	336	\r
	337	[Rule.Common.UEFI_DRIVER.BINARY]\r
	338	FILE DRIVER = $(NAMED_GUID) {\r
	339	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
	340	PE32 PE32 \|.efi\r
	341	UI STRING="$(MODULE_NAME)" Optional\r
	342	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	343	}\r
	344	\r
	345	[Rule.Common.UEFI_APPLICATION.BINARY]\r
	346	FILE APPLICATION = $(NAMED_GUID) {\r
	347	PE32 PE32 \|.efi\r
	348	UI STRING="$(MODULE_NAME)" Optional\r
	349	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
	350	}\r