[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / ArmVExpress-RTSM-A15.fdf

#\r
#  Copyright (c) 2011-2014, ARM Limited. All rights reserved.\r
#  \r
#  This program and the accompanying materials                          \r
#  are licensed and made available under the terms and conditions of the BSD License         \r
#  which accompanies this distribution.  The full text of the license may be found at        \r
#  http://opensource.org/licenses/bsd-license.php                                            \r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.RTSM_VE_Cortex-A15_EFI]\r
BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.\r
Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x300\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00080000\r
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
FV = FVMAIN_SEC\r
\r
0x00080000|0x00280000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FVMAIN_SEC]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/Sec/Sec.inf\r
\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 8         # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services) \r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
  \r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
  INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf\r
\r
  #\r
  # Semi-hosting filesystem\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
  \r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  # Versatile Express FileSystem\r
  INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
\r
  #\r
  # Multimedia Card Interface\r
  #\r
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
  INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
\r
  #\r
  # Platform  Driver
  #
  INF ArmPlatformPkg/ArmVExpressPkg/ArmFvpDxe/ArmFvpDxe.inf
  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf

  #
  # UEFI application (Shell Embedded Boot Loader) \r
  #  \r
  INF ShellBinPkg/UefiShell/UefiShell.inf \r
  \r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 8\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
!if $(EDK2_SKIP_PEICORE) == 1\r
  INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
!else\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
!endif\r
  \r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # \r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional         \r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)" Optional         \r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
1e57a462	1	#\r
94e0955d	2	# Copyright (c) 2011-2014, ARM Limited. All rights reserved.\r
1e57a462	3	# \r
	4	# This program and the accompanying materials \r
	5	# are licensed and made available under the terms and conditions of the BSD License \r
	6	# which accompanies this distribution. The full text of the license may be found at \r
	7	# http://opensource.org/licenses/bsd-license.php \r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.RTSM_VE_Cortex-A15_EFI]\r
	28	BaseAddress = 0x08000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.\r
9e2e89f0	29	Size = 0x00300000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
1e57a462	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
9e2e89f0	34	NumBlocks = 0x300\r
1e57a462	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x00080000\r
	53	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize\r
	54	FV = FVMAIN_SEC\r
	55	\r
	56	0x00080000\|0x00280000\r
	57	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	58	FV = FVMAIN_COMPACT\r
	59	\r
	60	\r
	61	################################################################################\r
	62	#\r
	63	# FV Section\r
	64	#\r
	65	# [FV] section is used to define what components or modules are placed within a flash\r
	66	# device file. This section also defines order the components and modules are positioned\r
	67	# within the image. The [FV] section consists of define statements, set statements and\r
	68	# module statements.\r
	69	#\r
	70	################################################################################\r
	71	\r
	72	[FV.FVMAIN_SEC]\r
	73	FvAlignment = 8\r
	74	ERASE_POLARITY = 1\r
	75	MEMORY_MAPPED = TRUE\r
	76	STICKY_WRITE = TRUE\r
	77	LOCK_CAP = TRUE\r
	78	LOCK_STATUS = TRUE\r
	79	WRITE_DISABLED_CAP = TRUE\r
	80	WRITE_ENABLED_CAP = TRUE\r
	81	WRITE_STATUS = TRUE\r
	82	WRITE_LOCK_CAP = TRUE\r
	83	WRITE_LOCK_STATUS = TRUE\r
	84	READ_DISABLED_CAP = TRUE\r
	85	READ_ENABLED_CAP = TRUE\r
	86	READ_STATUS = TRUE\r
	87	READ_LOCK_CAP = TRUE\r
	88	READ_LOCK_STATUS = TRUE\r
	89	\r
	90	INF ArmPlatformPkg/Sec/Sec.inf\r
	91	\r
	92	\r
	93	[FV.FvMain]\r
	94	BlockSize = 0x40\r
	95	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
	96	FvAlignment = 8 # FV alignment and FV attributes setting.\r
	97	ERASE_POLARITY = 1\r
	98	MEMORY_MAPPED = TRUE\r
99	STICKY_WRITE = TRUE\r
100	LOCK_CAP = TRUE\r
101	LOCK_STATUS = TRUE\r
102	WRITE_DISABLED_CAP = TRUE\r
103	WRITE_ENABLED_CAP = TRUE\r
104	WRITE_STATUS = TRUE\r
105	WRITE_LOCK_CAP = TRUE\r
106	WRITE_LOCK_STATUS = TRUE\r
107	READ_DISABLED_CAP = TRUE\r
108	READ_ENABLED_CAP = TRUE\r
109	READ_STATUS = TRUE\r
110	READ_LOCK_CAP = TRUE\r
111	READ_LOCK_STATUS = TRUE\r
112	\r
113	INF MdeModulePkg/Core/Dxe/DxeMain.inf \r
114	\r
115	#\r
116	# PI DXE Drivers producing Architectural Protocols (EFI Services) \r
117	#\r
118	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
119	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
120	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
121	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
122	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
123	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
124	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
125	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
126	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
127	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
128	\r
129	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
130	\r
131	#\r
132	# Multiple Console IO support\r
133	#\r
134	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
135	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
136	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
137	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
138	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
139	\r
017baa1c	140	INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
1e57a462	141	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
	142	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
	143	INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
	144	INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf\r
	145	\r
	146	#\r
	147	# Semi-hosting filesystem\r
	148	#\r
	149	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
	150	\r
	151	#\r
	152	# FAT filesystem + GPT/MBR partitioning\r
	153	#\r
	154	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
	155	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
	156	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
	157	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
	158	\r
94e0955d OM	159	# Versatile Express FileSystem\r
	160	INF ArmPlatformPkg/FileSystem/BootMonFs/BootMonFs.inf\r
	161	\r
1e57a462	162	#\r
	163	# Multimedia Card Interface\r
	164	#\r
	165	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
	166	INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
	167	\r
	168	#\r
bdf67cd6 RH	169	# Platform Driver
	170	#
	171	INF ArmPlatformPkg/ArmVExpressPkg/ArmFvpDxe/ArmFvpDxe.inf
	172	INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf
	173
	174	#
1e57a462	175	# UEFI application (Shell Embedded Boot Loader) \r
	176	# \r
	177	INF ShellBinPkg/UefiShell/UefiShell.inf \r
	178	\r
	179	#\r
	180	# Bds\r
	181	#\r
	182	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
	183	INF ArmPlatformPkg/Bds/Bds.inf\r
	184	\r
	185	\r
	186	[FV.FVMAIN_COMPACT]\r
	187	FvAlignment = 8\r
	188	ERASE_POLARITY = 1\r
	189	MEMORY_MAPPED = TRUE\r
	190	STICKY_WRITE = TRUE\r
	191	LOCK_CAP = TRUE\r
	192	LOCK_STATUS = TRUE\r
	193	WRITE_DISABLED_CAP = TRUE\r
	194	WRITE_ENABLED_CAP = TRUE\r
	195	WRITE_STATUS = TRUE\r
	196	WRITE_LOCK_CAP = TRUE\r
	197	WRITE_LOCK_STATUS = TRUE\r
	198	READ_DISABLED_CAP = TRUE\r
	199	READ_ENABLED_CAP = TRUE\r
	200	READ_STATUS = TRUE\r
	201	READ_LOCK_CAP = TRUE\r
	202	READ_LOCK_STATUS = TRUE\r
	203	\r
	204	!if $(EDK2_SKIP_PEICORE) == 1\r
	205	INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
	206	!else\r
	207	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
	208	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	209	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
	210	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
	211	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
	212	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	213	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
	214	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	215	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
	216	!endif\r
	217	\r
	218	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	219	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	220	SECTION FV_IMAGE = FVMAIN\r
	221	}\r
	222	}\r
	223	\r
	224	\r
	225	################################################################################\r
	226	#\r
	227	# Rules are use with the [FV] section's module INF type to define\r
	228	# how an FFS file is created for a given INF file. The following Rule are the default\r
	229	# rules for the different module type. User can add the customized rules to define the\r
	230	# content of the FFS file.\r
	231	#\r
	232	################################################################################\r
	233	\r
	234	\r
	235	############################################################################\r
	236	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section # \r
	237	############################################################################\r
	238	#\r
239	#[Rule.Common.DXE_DRIVER]\r
240	# FILE DRIVER = $(NAMED_GUID) {\r
241	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
242	# COMPRESS PI_STD {\r
243	# GUIDED {\r
244	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
245	# UI STRING="$(MODULE_NAME)" Optional\r
246	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
247	# }\r
248	# }\r
249	# }\r
250	#\r
251	############################################################################\r
252	\r
253	[Rule.Common.SEC]\r
254	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
255	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
256	}\r
257	\r
258	[Rule.Common.PEI_CORE]\r
259	FILE PEI_CORE = $(NAMED_GUID) {\r
260	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
261	UI STRING ="$(MODULE_NAME)" Optional \r
262	}\r
263	\r
264	[Rule.Common.PEIM]\r
265	FILE PEIM = $(NAMED_GUID) {\r
266	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
267	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
268	UI STRING="$(MODULE_NAME)" Optional \r
269	}\r
270	\r
271	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
272	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
273	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
274	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
275	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
276	UI STRING="$(MODULE_NAME)" Optional\r
277	}\r
278	}\r
279	\r
280	[Rule.Common.DXE_CORE]\r
281	FILE DXE_CORE = $(NAMED_GUID) {\r
282	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
283	UI STRING="$(MODULE_NAME)" Optional\r
284	}\r
285	\r
286	[Rule.Common.UEFI_DRIVER]\r
287	FILE DRIVER = $(NAMED_GUID) {\r
288	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
289	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
290	UI STRING="$(MODULE_NAME)" Optional\r
291	}\r
292	\r
293	[Rule.Common.DXE_DRIVER]\r
294	FILE DRIVER = $(NAMED_GUID) {\r
295	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
296	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
297	UI STRING="$(MODULE_NAME)" Optional\r
298	}\r
299	\r
300	[Rule.Common.DXE_RUNTIME_DRIVER]\r
301	FILE DRIVER = $(NAMED_GUID) {\r
302	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
303	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
304	UI STRING="$(MODULE_NAME)" Optional\r
305	}\r
306	\r
307	[Rule.Common.UEFI_APPLICATION]\r
308	FILE APPLICATION = $(NAMED_GUID) {\r
309	UI STRING ="$(MODULE_NAME)" Optional \r
310	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
311	}\r
312	\r
313	[Rule.Common.UEFI_DRIVER.BINARY]\r
314	FILE DRIVER = $(NAMED_GUID) {\r
315	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
316	PE32 PE32 \|.efi\r
317	UI STRING="$(MODULE_NAME)" Optional\r
318	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
319	}\r
320	\r
321	[Rule.Common.UEFI_APPLICATION.BINARY]\r
322	FILE APPLICATION = $(NAMED_GUID) {\r
323	PE32 PE32 \|.efi\r
324	UI STRING="$(MODULE_NAME)" Optional\r
325	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
326	}\r