[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / ArmVExpress-RTSM-A15.fdf

# FLASH layout file for ARM VE.
#
#  Copyright (c) 2011, ARM Limited. All rights reserved.
#  
#  This program and the accompanying materials                          
#  are licensed and made available under the terms and conditions of the BSD License         
#  which accompanies this distribution.  The full text of the license may be found at        
#  http://opensource.org/licenses/bsd-license.php                                            
#
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
#

################################################################################
#
# FD Section
# The [FD] Section is made up of the definition statements and a
# description of what goes into  the Flash Device Image.  Each FD section
# defines one flash "device" image.  A flash device image may be one of
# the following: Removable media bootable image (like a boot floppy
# image,) an Option ROM image (that would be "flashed" into an add-in
# card,) a System "Flash"  image (that would be burned into a system's
# flash) or an Update ("Capsule") image that will be used to update and
# existing system flash.
#
################################################################################

[FD.RTSM_VE_Cortex-A15_EFI]
BaseAddress   = 0x08000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in NOR Flash.
Size          = 0x00280000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device
ErasePolarity = 1

# This one is tricky, it must be: BlockSize * NumBlocks = Size
BlockSize     = 0x00001000
NumBlocks     = 0x280

################################################################################
#
# Following are lists of FD Region layout which correspond to the locations of different
# images within the flash device.
#
# Regions must be defined in ascending order and may not overlap.
#
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
# the pipe "|" character, followed by the size of the region, also in hex with the leading
# "0x" characters. Like:
# Offset|Size
# PcdOffsetCName|PcdSizeCName
# RegionType <FV, DATA, or FILE>
#
################################################################################

0x00000000|0x00080000
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize
FV = FVMAIN_SEC

0x00080000|0x00280000
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
FV = FVMAIN_COMPACT


################################################################################
#
# FV Section
#
# [FV] section is used to define what components or modules are placed within a flash
# device file.  This section also defines order the components and modules are positioned
# within the image.  The [FV] section consists of define statements, set statements and
# module statements.
#
################################################################################

[FV.FVMAIN_SEC]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF ArmPlatformPkg/Sec/Sec.inf


[FV.FvMain]
BlockSize          = 0x40
NumBlocks          = 0         # This FV gets compressed so make it just big enough
FvAlignment        = 8         # FV alignment and FV attributes setting.
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

  INF MdeModulePkg/Core/Dxe/DxeMain.inf 

  #
  # PI DXE Drivers producing Architectural Protocols (EFI Services) 
  #
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf

  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
  
  #
  # Multiple Console IO support
  #
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf

  INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
  INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
  INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf

  #
  # Semi-hosting filesystem
  #
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
  
  #
  # FAT filesystem + GPT/MBR partitioning
  #
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
  INF FatBinPkg/EnhancedFatDxe/Fat.inf
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf

  #
  # Multimedia Card Interface
  #
  INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
  INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf

  #
  # UEFI application (Shell Embedded Boot Loader) 
  #  
  INF ShellBinPkg/UefiShell/UefiShell.inf 
  
  #
  # Bds
  #
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
  INF ArmPlatformPkg/Bds/Bds.inf


[FV.FVMAIN_COMPACT]
FvAlignment        = 8
ERASE_POLARITY     = 1
MEMORY_MAPPED      = TRUE
STICKY_WRITE       = TRUE
LOCK_CAP           = TRUE
LOCK_STATUS        = TRUE
WRITE_DISABLED_CAP = TRUE
WRITE_ENABLED_CAP  = TRUE
WRITE_STATUS       = TRUE
WRITE_LOCK_CAP     = TRUE
WRITE_LOCK_STATUS  = TRUE
READ_DISABLED_CAP  = TRUE
READ_ENABLED_CAP   = TRUE
READ_STATUS        = TRUE
READ_LOCK_CAP      = TRUE
READ_LOCK_STATUS   = TRUE

!if $(EDK2_SKIP_PEICORE) == 1
  INF ArmPlatformPkg/PrePi/PeiUniCore.inf
!else
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
  INF MdeModulePkg/Core/Pei/PeiMain.inf
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
!endif
  
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
      SECTION FV_IMAGE = FVMAIN
    }
  }


################################################################################
#
# Rules are use with the [FV] section's module INF type to define
# how an FFS file is created for a given INF file. The following Rule are the default
# rules for the different module type. User can add the customized rules to define the
# content of the FFS file.
#
################################################################################


############################################################################
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   # 
############################################################################
#
#[Rule.Common.DXE_DRIVER]
#  FILE DRIVER = $(NAMED_GUID) {
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
#    COMPRESS PI_STD {
#      GUIDED {
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
#        UI       STRING="$(MODULE_NAME)" Optional
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
#      }
#    }
#  }
#
############################################################################

[Rule.Common.SEC]
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
    TE  TE    Align = 32                $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.PEI_CORE]
  FILE PEI_CORE = $(NAMED_GUID) {
    TE     TE                           $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI     STRING ="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM]
  FILE PEIM = $(NAMED_GUID) {
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex
     TE       TE                        $(INF_OUTPUT)/$(MODULE_NAME).efi
     UI       STRING="$(MODULE_NAME)" Optional         
  }

[Rule.Common.PEIM.TIANOCOMPRESSED]
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi
      UI        STRING="$(MODULE_NAME)" Optional
    }
  }

[Rule.Common.DXE_CORE]
  FILE DXE_CORE = $(NAMED_GUID) {
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI       STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.DXE_RUNTIME_DRIVER]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi
    UI           STRING="$(MODULE_NAME)" Optional
  }

[Rule.Common.UEFI_APPLICATION]
  FILE APPLICATION = $(NAMED_GUID) {
    UI     STRING ="$(MODULE_NAME)" Optional         
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi
  }

[Rule.Common.UEFI_DRIVER.BINARY]
  FILE DRIVER = $(NAMED_GUID) {
    DXE_DEPEX DXE_DEPEX Optional      |.depex
    PE32      PE32                    |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }

[Rule.Common.UEFI_APPLICATION.BINARY]
  FILE APPLICATION = $(NAMED_GUID) {
    PE32      PE32                    |.efi
    UI        STRING="$(MODULE_NAME)" Optional
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
  }
Commit	Line	Data
88d4f51d	1	# FLASH layout file for ARM VE.
	2	#
	3	# Copyright (c) 2011, ARM Limited. All rights reserved.
	4	#
	5	# This program and the accompanying materials
	6	# are licensed and made available under the terms and conditions of the BSD License
	7	# which accompanies this distribution. The full text of the license may be found at
	8	# http://opensource.org/licenses/bsd-license.php
	9	#
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
	12	#
	13
	14	################################################################################
	15	#
	16	# FD Section
	17	# The [FD] Section is made up of the definition statements and a
	18	# description of what goes into the Flash Device Image. Each FD section
	19	# defines one flash "device" image. A flash device image may be one of
	20	# the following: Removable media bootable image (like a boot floppy
	21	# image,) an Option ROM image (that would be "flashed" into an add-in
	22	# card,) a System "Flash" image (that would be burned into a system's
	23	# flash) or an Update ("Capsule") image that will be used to update and
	24	# existing system flash.
	25	#
	26	################################################################################
	27
	28	[FD.RTSM_VE_Cortex-A15_EFI]
	29	BaseAddress = 0x08000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in NOR Flash.
	30	Size = 0x00280000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device
	31	ErasePolarity = 1
	32
	33	# This one is tricky, it must be: BlockSize * NumBlocks = Size
	34	BlockSize = 0x00001000
	35	NumBlocks = 0x280
	36
	37	################################################################################
	38	#
	39	# Following are lists of FD Region layout which correspond to the locations of different
	40	# images within the flash device.
	41	#
	42	# Regions must be defined in ascending order and may not overlap.
	43	#
	44	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
	45	# the pipe "\|" character, followed by the size of the region, also in hex with the leading
	46	# "0x" characters. Like:
	47	# Offset\|Size
	48	# PcdOffsetCName\|PcdSizeCName
	49	# RegionType <FV, DATA, or FILE>
	50	#
	51	################################################################################
	52
	53	0x00000000\|0x00080000
ce5ed6c8	54	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize
88d4f51d	55	FV = FVMAIN_SEC
	56
	57	0x00080000\|0x00280000
ce5ed6c8	58	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize
88d4f51d	59	FV = FVMAIN_COMPACT
	60
	61
	62	################################################################################
	63	#
	64	# FV Section
	65	#
	66	# [FV] section is used to define what components or modules are placed within a flash
	67	# device file. This section also defines order the components and modules are positioned
	68	# within the image. The [FV] section consists of define statements, set statements and
	69	# module statements.
	70	#
	71	################################################################################
	72
	73	[FV.FVMAIN_SEC]
	74	FvAlignment = 8
	75	ERASE_POLARITY = 1
	76	MEMORY_MAPPED = TRUE
	77	STICKY_WRITE = TRUE
	78	LOCK_CAP = TRUE
	79	LOCK_STATUS = TRUE
	80	WRITE_DISABLED_CAP = TRUE
	81	WRITE_ENABLED_CAP = TRUE
	82	WRITE_STATUS = TRUE
	83	WRITE_LOCK_CAP = TRUE
	84	WRITE_LOCK_STATUS = TRUE
	85	READ_DISABLED_CAP = TRUE
	86	READ_ENABLED_CAP = TRUE
	87	READ_STATUS = TRUE
	88	READ_LOCK_CAP = TRUE
	89	READ_LOCK_STATUS = TRUE
	90
	91	INF ArmPlatformPkg/Sec/Sec.inf
	92
	93
	94	[FV.FvMain]
	95	BlockSize = 0x40
	96	NumBlocks = 0 # This FV gets compressed so make it just big enough
	97	FvAlignment = 8 # FV alignment and FV attributes setting.
	98	ERASE_POLARITY = 1
	99	MEMORY_MAPPED = TRUE
	100	STICKY_WRITE = TRUE
	101	LOCK_CAP = TRUE
	102	LOCK_STATUS = TRUE
	103	WRITE_DISABLED_CAP = TRUE
	104	WRITE_ENABLED_CAP = TRUE
	105	WRITE_STATUS = TRUE
	106	WRITE_LOCK_CAP = TRUE
	107	WRITE_LOCK_STATUS = TRUE
	108	READ_DISABLED_CAP = TRUE
	109	READ_ENABLED_CAP = TRUE
	110	READ_STATUS = TRUE
	111	READ_LOCK_CAP = TRUE
	112	READ_LOCK_STATUS = TRUE
	113
	114	INF MdeModulePkg/Core/Dxe/DxeMain.inf
	115
	116	#
	117	# PI DXE Drivers producing Architectural Protocols (EFI Services)
	118	#
	119	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
	120	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
	121	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
	122	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
123	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
124	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
125	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
126	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
127	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
128	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
129
130	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
131
132	#
133	# Multiple Console IO support
134	#
135	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
136	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
137	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
138	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
139	INF EmbeddedPkg/SerialDxe/SerialDxe.inf
140
141	INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf
142	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
143	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf
144	INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf
145	INF ArmPlatformPkg/Drivers/SP805WatchdogDxe/SP805WatchdogDxe.inf
146
147	#
148	# Semi-hosting filesystem
149	#
150	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf
151
152	#
153	# FAT filesystem + GPT/MBR partitioning
154	#
155	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
156	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
e1772adf	157	INF FatBinPkg/EnhancedFatDxe/Fat.inf
88d4f51d	158	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
88d4f51d	159
53f39c6c	160	#
	161	# Multimedia Card Interface
	162	#
	163	INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf
	164	INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf
	165
88d4f51d	166	#
	167	# UEFI application (Shell Embedded Boot Loader)
	168	#
e1772adf	169	INF ShellBinPkg/UefiShell/UefiShell.inf
88d4f51d	170
	171	#
	172	# Bds
	173	#
	174	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
	175	INF ArmPlatformPkg/Bds/Bds.inf
	176
	177
	178	[FV.FVMAIN_COMPACT]
	179	FvAlignment = 8
	180	ERASE_POLARITY = 1
	181	MEMORY_MAPPED = TRUE
	182	STICKY_WRITE = TRUE
	183	LOCK_CAP = TRUE
	184	LOCK_STATUS = TRUE
	185	WRITE_DISABLED_CAP = TRUE
	186	WRITE_ENABLED_CAP = TRUE
	187	WRITE_STATUS = TRUE
	188	WRITE_LOCK_CAP = TRUE
	189	WRITE_LOCK_STATUS = TRUE
	190	READ_DISABLED_CAP = TRUE
	191	READ_ENABLED_CAP = TRUE
	192	READ_STATUS = TRUE
	193	READ_LOCK_CAP = TRUE
	194	READ_LOCK_STATUS = TRUE
	195
	196	!if $(EDK2_SKIP_PEICORE) == 1
	197	INF ArmPlatformPkg/PrePi/PeiUniCore.inf
	198	!else
	199	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf
	200	INF MdeModulePkg/Core/Pei/PeiMain.inf
	201	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf
	202	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf
	203	INF ArmPkg/Drivers/CpuPei/CpuPei.inf
	204	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf
	205	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf
	206	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
	207	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf
	208	!endif
	209
	210	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
	211	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
	212	SECTION FV_IMAGE = FVMAIN
	213	}
	214	}
	215
	216
	217	################################################################################
	218	#
	219	# Rules are use with the [FV] section's module INF type to define
	220	# how an FFS file is created for a given INF file. The following Rule are the default
	221	# rules for the different module type. User can add the customized rules to define the
	222	# content of the FFS file.
	223	#
	224	################################################################################
	225
	226
	227	############################################################################
	228	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
	229	############################################################################
	230	#
	231	#[Rule.Common.DXE_DRIVER]
	232	# FILE DRIVER = $(NAMED_GUID) {
	233	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
234	# COMPRESS PI_STD {
235	# GUIDED {
236	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
237	# UI STRING="$(MODULE_NAME)" Optional
238	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
239	# }
240	# }
241	# }
242	#
243	############################################################################
244
245	[Rule.Common.SEC]
246	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {
247	TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi
248	}
249
250	[Rule.Common.PEI_CORE]
251	FILE PEI_CORE = $(NAMED_GUID) {
252	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
253	UI STRING ="$(MODULE_NAME)" Optional
254	}
255
256	[Rule.Common.PEIM]
257	FILE PEIM = $(NAMED_GUID) {
258	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
259	TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi
260	UI STRING="$(MODULE_NAME)" Optional
261	}
262
263	[Rule.Common.PEIM.TIANOCOMPRESSED]
264	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
265	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
266	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
267	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
268	UI STRING="$(MODULE_NAME)" Optional
269	}
270	}
271
272	[Rule.Common.DXE_CORE]
273	FILE DXE_CORE = $(NAMED_GUID) {
274	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
275	UI STRING="$(MODULE_NAME)" Optional
276	}
277
278	[Rule.Common.UEFI_DRIVER]
279	FILE DRIVER = $(NAMED_GUID) {
280	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
281	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
282	UI STRING="$(MODULE_NAME)" Optional
283	}
284
285	[Rule.Common.DXE_DRIVER]
286	FILE DRIVER = $(NAMED_GUID) {
287	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
288	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
289	UI STRING="$(MODULE_NAME)" Optional
290	}
291
292	[Rule.Common.DXE_RUNTIME_DRIVER]
293	FILE DRIVER = $(NAMED_GUID) {
294	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
295	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
296	UI STRING="$(MODULE_NAME)" Optional
297	}
298
299	[Rule.Common.UEFI_APPLICATION]
300	FILE APPLICATION = $(NAMED_GUID) {
301	UI STRING ="$(MODULE_NAME)" Optional
302	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
303	}
e1772adf	304
	305	[Rule.Common.UEFI_DRIVER.BINARY]
	306	FILE DRIVER = $(NAMED_GUID) {
	307	DXE_DEPEX DXE_DEPEX Optional \|.depex
	308	PE32 PE32 \|.efi
	309	UI STRING="$(MODULE_NAME)" Optional
	310	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
	311	}
	312
	313	[Rule.Common.UEFI_APPLICATION.BINARY]
	314	FILE APPLICATION = $(NAMED_GUID) {
	315	PE32 PE32 \|.efi
	316	UI STRING="$(MODULE_NAME)" Optional
	317	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
	318	}