[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / ArmVExpress-RTSM-AEMv8Ax4-foundation.fdf

#\r
#  Copyright (c) 2011, 2013, ARM Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.RTSM_VE_Foundationv8_EFI]\r
BaseAddress   = 0xA0000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # The base address of the Firmware in RAM (Foundation model has no NOR Flash).\r
Size          = 0x00300000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x300\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
0x00000000|0x00080000\r
gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
FV = FVMAIN_SEC\r
\r
0x00080000|0x00280000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FVMAIN_SEC]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF ArmPlatformPkg/Sec/Sec.inf\r
\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 16        # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
\r
  #\r
  # Semi-hosting filesystem\r
  #\r
  INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF ShellBinPkg/UefiShell/UefiShell.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
!if $(EDK2_SKIP_PEICORE) == 1\r
  INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
!else\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
!endif\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)"     Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
Commit	Line	Data
f9cec5f1 HL	1	#\r
	2	# Copyright (c) 2011, 2013, ARM Limited. All rights reserved.\r
	3	#\r
	4	# This program and the accompanying materials\r
	5	# are licensed and made available under the terms and conditions of the BSD License\r
	6	# which accompanies this distribution. The full text of the license may be found at\r
	7	# http://opensource.org/licenses/bsd-license.php\r
	8	#\r
	9	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	10	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	11	#\r
	12	\r
	13	################################################################################\r
	14	#\r
	15	# FD Section\r
	16	# The [FD] Section is made up of the definition statements and a\r
	17	# description of what goes into the Flash Device Image. Each FD section\r
	18	# defines one flash "device" image. A flash device image may be one of\r
	19	# the following: Removable media bootable image (like a boot floppy\r
	20	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	21	# card,) a System "Flash" image (that would be burned into a system's\r
	22	# flash) or an Update ("Capsule") image that will be used to update and\r
	23	# existing system flash.\r
	24	#\r
	25	################################################################################\r
	26	\r
	27	[FD.RTSM_VE_Foundationv8_EFI]\r
	28	BaseAddress = 0xA0000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # The base address of the Firmware in RAM (Foundation model has no NOR Flash).\r
	29	Size = 0x00300000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	30	ErasePolarity = 1\r
	31	\r
	32	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	33	BlockSize = 0x00001000\r
	34	NumBlocks = 0x300\r
	35	\r
	36	################################################################################\r
	37	#\r
	38	# Following are lists of FD Region layout which correspond to the locations of different\r
	39	# images within the flash device.\r
	40	#\r
	41	# Regions must be defined in ascending order and may not overlap.\r
	42	#\r
	43	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	44	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	45	# "0x" characters. Like:\r
	46	# Offset\|Size\r
	47	# PcdOffsetCName\|PcdSizeCName\r
	48	# RegionType <FV, DATA, or FILE>\r
	49	#\r
	50	################################################################################\r
	51	\r
	52	0x00000000\|0x00080000\r
	53	gArmTokenSpaceGuid.PcdSecureFvBaseAddress\|gArmTokenSpaceGuid.PcdSecureFvSize\r
	54	FV = FVMAIN_SEC\r
	55	\r
	56	0x00080000\|0x00280000\r
	57	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
	58	FV = FVMAIN_COMPACT\r
	59	\r
	60	\r
	61	################################################################################\r
	62	#\r
	63	# FV Section\r
	64	#\r
65	# [FV] section is used to define what components or modules are placed within a flash\r
66	# device file. This section also defines order the components and modules are positioned\r
67	# within the image. The [FV] section consists of define statements, set statements and\r
68	# module statements.\r
69	#\r
70	################################################################################\r
71	\r
72	[FV.FVMAIN_SEC]\r
73	FvAlignment = 16\r
74	ERASE_POLARITY = 1\r
75	MEMORY_MAPPED = TRUE\r
76	STICKY_WRITE = TRUE\r
77	LOCK_CAP = TRUE\r
78	LOCK_STATUS = TRUE\r
79	WRITE_DISABLED_CAP = TRUE\r
80	WRITE_ENABLED_CAP = TRUE\r
81	WRITE_STATUS = TRUE\r
82	WRITE_LOCK_CAP = TRUE\r
83	WRITE_LOCK_STATUS = TRUE\r
84	READ_DISABLED_CAP = TRUE\r
85	READ_ENABLED_CAP = TRUE\r
86	READ_STATUS = TRUE\r
87	READ_LOCK_CAP = TRUE\r
88	READ_LOCK_STATUS = TRUE\r
89	\r
90	INF ArmPlatformPkg/Sec/Sec.inf\r
91	\r
92	\r
93	[FV.FvMain]\r
94	BlockSize = 0x40\r
95	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
96	FvAlignment = 16 # FV alignment and FV attributes setting.\r
97	ERASE_POLARITY = 1\r
98	MEMORY_MAPPED = TRUE\r
99	STICKY_WRITE = TRUE\r
100	LOCK_CAP = TRUE\r
101	LOCK_STATUS = TRUE\r
102	WRITE_DISABLED_CAP = TRUE\r
103	WRITE_ENABLED_CAP = TRUE\r
104	WRITE_STATUS = TRUE\r
105	WRITE_LOCK_CAP = TRUE\r
106	WRITE_LOCK_STATUS = TRUE\r
107	READ_DISABLED_CAP = TRUE\r
108	READ_ENABLED_CAP = TRUE\r
109	READ_STATUS = TRUE\r
110	READ_LOCK_CAP = TRUE\r
111	READ_LOCK_STATUS = TRUE\r
112	\r
113	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
114	\r
115	#\r
116	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
117	#\r
118	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
119	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
120	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
121	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
122	INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf\r
123	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
124	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
125	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
126	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
127	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
128	\r
129	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
130	\r
131	#\r
132	# Multiple Console IO support\r
133	#\r
134	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
135	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
136	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
137	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
138	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
139	\r
140	INF ArmPkg/Drivers/PL390Gic/PL390GicDxe.inf\r
141	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
142	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
143	\r
144	#\r
145	# Semi-hosting filesystem\r
146	#\r
147	INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
148	\r
149	#\r
150	# FAT filesystem + GPT/MBR partitioning\r
151	#\r
152	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
153	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
154	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
155	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
156	\r
157	#\r
158	# UEFI application (Shell Embedded Boot Loader)\r
159	#\r
160	INF ShellBinPkg/UefiShell/UefiShell.inf\r
161	\r
162	#\r
163	# Bds\r
164	#\r
165	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
166	INF ArmPlatformPkg/Bds/Bds.inf\r
167	\r
168	\r
169	[FV.FVMAIN_COMPACT]\r
170	FvAlignment = 16\r
171	ERASE_POLARITY = 1\r
172	MEMORY_MAPPED = TRUE\r
173	STICKY_WRITE = TRUE\r
174	LOCK_CAP = TRUE\r
175	LOCK_STATUS = TRUE\r
176	WRITE_DISABLED_CAP = TRUE\r
177	WRITE_ENABLED_CAP = TRUE\r
178	WRITE_STATUS = TRUE\r
179	WRITE_LOCK_CAP = TRUE\r
180	WRITE_LOCK_STATUS = TRUE\r
181	READ_DISABLED_CAP = TRUE\r
182	READ_ENABLED_CAP = TRUE\r
183	READ_STATUS = TRUE\r
184	READ_LOCK_CAP = TRUE\r
185	READ_LOCK_STATUS = TRUE\r
186	\r
187	!if $(EDK2_SKIP_PEICORE) == 1\r
188	INF ArmPlatformPkg/PrePi/PeiMPCore.inf\r
189	!else\r
190	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreMPCore.inf\r
191	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
192	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
193	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
194	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
195	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
196	INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
197	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
198	!endif\r
199	\r
200	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
201	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
202	SECTION FV_IMAGE = FVMAIN\r
203	}\r
204	}\r
205	\r
206	\r
207	################################################################################\r
208	#\r
209	# Rules are use with the [FV] section's module INF type to define\r
210	# how an FFS file is created for a given INF file. The following Rule are the default\r
211	# rules for the different module type. User can add the customized rules to define the\r
212	# content of the FFS file.\r
213	#\r
214	################################################################################\r
215	\r
216	\r
217	############################################################################\r
218	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
219	############################################################################\r
220	#\r
221	#[Rule.Common.DXE_DRIVER]\r
222	# FILE DRIVER = $(NAMED_GUID) {\r
223	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
224	# COMPRESS PI_STD {\r
225	# GUIDED {\r
226	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
227	# UI STRING="$(MODULE_NAME)" Optional\r
228	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
229	# }\r
230	# }\r
231	# }\r
232	#\r
233	############################################################################\r
234	\r
235	[Rule.Common.SEC]\r
236	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
237	TE TE Align = 128 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
238	}\r
239	\r
240	[Rule.Common.PEI_CORE]\r
241	FILE PEI_CORE = $(NAMED_GUID) {\r
242	TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
243	UI STRING ="$(MODULE_NAME)" Optional\r
244	}\r
245	\r
246	[Rule.Common.PEIM]\r
247	FILE PEIM = $(NAMED_GUID) {\r
248	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
249	TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
250	UI STRING="$(MODULE_NAME)" Optional\r
251	}\r
252	\r
253	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
254	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
255	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
256	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
257	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
258	UI STRING="$(MODULE_NAME)" Optional\r
259	}\r
260	}\r
261	\r
262	[Rule.Common.DXE_CORE]\r
263	FILE DXE_CORE = $(NAMED_GUID) {\r
264	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
265	UI STRING="$(MODULE_NAME)" Optional\r
266	}\r
267	\r
268	[Rule.Common.UEFI_DRIVER]\r
269	FILE DRIVER = $(NAMED_GUID) {\r
270	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
271	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
272	UI STRING="$(MODULE_NAME)" Optional\r
273	}\r
274	\r
275	[Rule.Common.DXE_DRIVER]\r
276	FILE DRIVER = $(NAMED_GUID) {\r
277	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
278	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
279	UI STRING="$(MODULE_NAME)" Optional\r
280	}\r
281	\r
282	[Rule.Common.DXE_RUNTIME_DRIVER]\r
283	FILE DRIVER = $(NAMED_GUID) {\r
284	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
285	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
286	UI STRING="$(MODULE_NAME)" Optional\r
287	}\r
288	\r
289	[Rule.Common.UEFI_APPLICATION]\r
290	FILE APPLICATION = $(NAMED_GUID) {\r
291	UI STRING ="$(MODULE_NAME)" Optional\r
292	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
293	}\r
294	\r
295	[Rule.Common.UEFI_DRIVER.BINARY]\r
296	FILE DRIVER = $(NAMED_GUID) {\r
297	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
298	PE32 PE32 \|.efi\r
299	UI STRING="$(MODULE_NAME)" Optional\r
300	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
301	}\r
302	\r
303	[Rule.Common.UEFI_APPLICATION.BINARY]\r
304	FILE APPLICATION = $(NAMED_GUID) {\r
305	PE32 PE32 \|.efi\r
306	UI STRING="$(MODULE_NAME)" Optional\r
307	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
308	}\r