[mirror_edk2.git] / ArmPlatformPkg / ArmVirtualizationPkg / ArmVirtualizationQemu.fdf

#\r
#  Copyright (c) 2011, 2013, ARM Limited. All rights reserved.\r
#  Copyright (c) 2014, Linaro Limited. All rights reserved.\r
#\r
#  This program and the accompanying materials\r
#  are licensed and made available under the terms and conditions of the BSD License\r
#  which accompanies this distribution.  The full text of the license may be found at\r
#  http://opensource.org/licenses/bsd-license.php\r
#\r
#  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
#  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
\r
################################################################################\r
#\r
# FD Section\r
# The [FD] Section is made up of the definition statements and a\r
# description of what goes into  the Flash Device Image.  Each FD section\r
# defines one flash "device" image.  A flash device image may be one of\r
# the following: Removable media bootable image (like a boot floppy\r
# image,) an Option ROM image (that would be "flashed" into an add-in\r
# card,) a System "Flash"  image (that would be burned into a system's\r
# flash) or an Update ("Capsule") image that will be used to update and\r
# existing system flash.\r
#\r
################################################################################\r
\r
[FD.QEMU_EFI]\r
BaseAddress   = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress  # QEMU assigns 0 - 0x8000000 for a BootROM\r
Size          = 0x00200000|gArmTokenSpaceGuid.PcdFdSize         # The size in bytes of the FLASH Device\r
ErasePolarity = 1\r
\r
# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
BlockSize     = 0x00001000\r
NumBlocks     = 0x200\r
\r
################################################################################\r
#\r
# Following are lists of FD Region layout which correspond to the locations of different\r
# images within the flash device.\r
#\r
# Regions must be defined in ascending order and may not overlap.\r
#\r
# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
# "0x" characters. Like:\r
# Offset|Size\r
# PcdOffsetCName|PcdSizeCName\r
# RegionType <FV, DATA, or FILE>\r
#\r
################################################################################\r
\r
#\r
# UEFI has trouble dealing with FVs that reside at physical address 0x0.\r
# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the\r
# real FV at offset 0x1000\r
#\r
0x00000000|0x00001000\r
DATA = {\r
!if $(ARCH) == AARCH64\r
  0x00, 0x04, 0x00, 0x14   # 'b 0x1000' in AArch64 ASM\r
!else\r
  0xfe, 0x03, 0x00, 0xea   # 'b 0x1000' in AArch32 ASM\r
!endif\r
}\r
\r
0x00001000|0x001ff000\r
gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
FV = FVMAIN_COMPACT\r
\r
\r
################################################################################\r
#\r
# FV Section\r
#\r
# [FV] section is used to define what components or modules are placed within a flash\r
# device file.  This section also defines order the components and modules are positioned\r
# within the image.  The [FV] section consists of define statements, set statements and\r
# module statements.\r
#\r
################################################################################\r
\r
[FV.FvMain]\r
BlockSize          = 0x40\r
NumBlocks          = 0         # This FV gets compressed so make it just big enough\r
FvAlignment        = 16        # FV alignment and FV attributes setting.\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  APRIORI DXE {\r
    INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
    INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf\r
  }\r
  INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
  INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
  INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf\r
\r
  #\r
  # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
  #\r
  INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
  INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
  INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
  INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
  INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
  INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
  INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
  INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
  INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
  INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
\r
  #\r
  # Multiple Console IO support\r
  #\r
  INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
  INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
  INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
  INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
  INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
\r
  INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
  INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
  INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
  INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
\r
  #\r
  # FAT filesystem + GPT/MBR partitioning\r
  #\r
  INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
  INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
  INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
  INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
\r
  #\r
  # Platform Driver\r
  #\r
  INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf\r
  INF OvmfPkg/VirtioNetDxe/VirtioNet.inf\r
  INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf\r
\r
  #\r
  # UEFI application (Shell Embedded Boot Loader)\r
  #\r
  INF ShellBinPkg/UefiShell/UefiShell.inf\r
\r
  #\r
  # Bds\r
  #\r
  INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
!ifdef INTEL_BDS\r
  INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
  INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
  INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
!else\r
  INF ArmPlatformPkg/Bds/Bds.inf\r
!endif\r
\r
  #\r
  # Networking stack\r
  #\r
  INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
  INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
  INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
  INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
  INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
  INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
  INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
\r
  #\r
  # SCSI Bus and Disk Driver\r
  #\r
  INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
  INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
\r
[FV.FVMAIN_COMPACT]\r
FvAlignment        = 16\r
ERASE_POLARITY     = 1\r
MEMORY_MAPPED      = TRUE\r
STICKY_WRITE       = TRUE\r
LOCK_CAP           = TRUE\r
LOCK_STATUS        = TRUE\r
WRITE_DISABLED_CAP = TRUE\r
WRITE_ENABLED_CAP  = TRUE\r
WRITE_STATUS       = TRUE\r
WRITE_LOCK_CAP     = TRUE\r
WRITE_LOCK_STATUS  = TRUE\r
READ_DISABLED_CAP  = TRUE\r
READ_ENABLED_CAP   = TRUE\r
READ_STATUS        = TRUE\r
READ_LOCK_CAP      = TRUE\r
READ_LOCK_STATUS   = TRUE\r
\r
  APRIORI PEI {\r
    INF  MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  }\r
  INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
  INF MdeModulePkg/Core/Pei/PeiMain.inf\r
  INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
  INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
  INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
  INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
  INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
  INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
\r
  FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
    SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
      SECTION FV_IMAGE = FVMAIN\r
    }\r
  }\r
\r
\r
################################################################################\r
#\r
# Rules are use with the [FV] section's module INF type to define\r
# how an FFS file is created for a given INF file. The following Rule are the default\r
# rules for the different module type. User can add the customized rules to define the\r
# content of the FFS file.\r
#\r
################################################################################\r
\r
\r
############################################################################\r
# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section   #\r
############################################################################\r
#\r
#[Rule.Common.DXE_DRIVER]\r
#  FILE DRIVER = $(NAMED_GUID) {\r
#    DXE_DEPEX    DXE_DEPEX               Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
#    COMPRESS PI_STD {\r
#      GUIDED {\r
#        PE32     PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
#        UI       STRING="$(MODULE_NAME)" Optional\r
#        VERSION  STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
#      }\r
#    }\r
#  }\r
#\r
############################################################################\r
\r
[Rule.Common.SEC]\r
  FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
    TE  TE Align = 128                  $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.PEI_CORE]\r
  FILE PEI_CORE = $(NAMED_GUID) {\r
    TE     TE Align = 8                 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI     STRING ="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM]\r
  FILE PEIM = $(NAMED_GUID) {\r
     PEI_DEPEX PEI_DEPEX Optional       $(INF_OUTPUT)/$(MODULE_NAME).depex\r
     TE       TE Align = 8              $(INF_OUTPUT)/$(MODULE_NAME).efi\r
     UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.PEIM.TIANOCOMPRESSED]\r
  FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
    PEI_DEPEX PEI_DEPEX Optional        $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
      PE32      PE32                    $(INF_OUTPUT)/$(MODULE_NAME).efi\r
      UI        STRING="$(MODULE_NAME)" Optional\r
    }\r
  }\r
\r
[Rule.Common.DXE_CORE]\r
  FILE DXE_CORE = $(NAMED_GUID) {\r
    PE32     PE32                       $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI       STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.DXE_RUNTIME_DRIVER]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX    DXE_DEPEX              Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
    PE32         PE32                   $(INF_OUTPUT)/$(MODULE_NAME).efi\r
    UI           STRING="$(MODULE_NAME)" Optional\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    UI     STRING ="$(MODULE_NAME)"     Optional\r
    PE32   PE32                         $(INF_OUTPUT)/$(MODULE_NAME).efi\r
  }\r
\r
[Rule.Common.UEFI_DRIVER.BINARY]\r
  FILE DRIVER = $(NAMED_GUID) {\r
    DXE_DEPEX DXE_DEPEX Optional      |.depex\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.UEFI_APPLICATION.BINARY]\r
  FILE APPLICATION = $(NAMED_GUID) {\r
    PE32      PE32                    |.efi\r
    UI        STRING="$(MODULE_NAME)" Optional\r
    VERSION   STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
  }\r
\r
[Rule.Common.USER_DEFINED.ACPITABLE]\r
  FILE FREEFORM = $(NAMED_GUID) {\r
    RAW       ACPI                    |.acpi\r
    RAW       ASL                     |.aml\r
    UI        STRING="$(MODULE_NAME)" Optional\r
  }\r
Commit	Line	Data
6f5872b1 MC	1	#\r
	2	# Copyright (c) 2011, 2013, ARM Limited. All rights reserved.\r
	3	# Copyright (c) 2014, Linaro Limited. All rights reserved.\r
	4	#\r
	5	# This program and the accompanying materials\r
	6	# are licensed and made available under the terms and conditions of the BSD License\r
	7	# which accompanies this distribution. The full text of the license may be found at\r
	8	# http://opensource.org/licenses/bsd-license.php\r
	9	#\r
	10	# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	11	# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	12	#\r
	13	\r
	14	################################################################################\r
	15	#\r
	16	# FD Section\r
	17	# The [FD] Section is made up of the definition statements and a\r
	18	# description of what goes into the Flash Device Image. Each FD section\r
	19	# defines one flash "device" image. A flash device image may be one of\r
	20	# the following: Removable media bootable image (like a boot floppy\r
	21	# image,) an Option ROM image (that would be "flashed" into an add-in\r
	22	# card,) a System "Flash" image (that would be burned into a system's\r
	23	# flash) or an Update ("Capsule") image that will be used to update and\r
	24	# existing system flash.\r
	25	#\r
	26	################################################################################\r
	27	\r
	28	[FD.QEMU_EFI]\r
	29	BaseAddress = 0x00000000\|gArmTokenSpaceGuid.PcdFdBaseAddress # QEMU assigns 0 - 0x8000000 for a BootROM\r
	30	Size = 0x00200000\|gArmTokenSpaceGuid.PcdFdSize # The size in bytes of the FLASH Device\r
	31	ErasePolarity = 1\r
	32	\r
	33	# This one is tricky, it must be: BlockSize * NumBlocks = Size\r
	34	BlockSize = 0x00001000\r
	35	NumBlocks = 0x200\r
	36	\r
	37	################################################################################\r
	38	#\r
	39	# Following are lists of FD Region layout which correspond to the locations of different\r
	40	# images within the flash device.\r
	41	#\r
	42	# Regions must be defined in ascending order and may not overlap.\r
	43	#\r
	44	# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
	45	# the pipe "\|" character, followed by the size of the region, also in hex with the leading\r
	46	# "0x" characters. Like:\r
	47	# Offset\|Size\r
	48	# PcdOffsetCName\|PcdSizeCName\r
	49	# RegionType <FV, DATA, or FILE>\r
	50	#\r
	51	################################################################################\r
	52	\r
	53	#\r
	54	# UEFI has trouble dealing with FVs that reside at physical address 0x0.\r
	55	# So instead, put a hardcoded 'jump to 0x1000' at offset 0x0, and put the\r
	56	# real FV at offset 0x1000\r
	57	#\r
	58	0x00000000\|0x00001000\r
	59	DATA = {\r
	60	!if $(ARCH) == AARCH64\r
	61	0x00, 0x04, 0x00, 0x14 # 'b 0x1000' in AArch64 ASM\r
	62	!else\r
	63	0xfe, 0x03, 0x00, 0xea # 'b 0x1000' in AArch32 ASM\r
	64	!endif\r
65	}\r
66	\r
67	0x00001000\|0x001ff000\r
68	gArmTokenSpaceGuid.PcdFvBaseAddress\|gArmTokenSpaceGuid.PcdFvSize\r
69	FV = FVMAIN_COMPACT\r
70	\r
71	\r
72	################################################################################\r
73	#\r
74	# FV Section\r
75	#\r
76	# [FV] section is used to define what components or modules are placed within a flash\r
77	# device file. This section also defines order the components and modules are positioned\r
78	# within the image. The [FV] section consists of define statements, set statements and\r
79	# module statements.\r
80	#\r
81	################################################################################\r
82	\r
83	[FV.FvMain]\r
84	BlockSize = 0x40\r
85	NumBlocks = 0 # This FV gets compressed so make it just big enough\r
86	FvAlignment = 16 # FV alignment and FV attributes setting.\r
87	ERASE_POLARITY = 1\r
88	MEMORY_MAPPED = TRUE\r
89	STICKY_WRITE = TRUE\r
90	LOCK_CAP = TRUE\r
91	LOCK_STATUS = TRUE\r
92	WRITE_DISABLED_CAP = TRUE\r
93	WRITE_ENABLED_CAP = TRUE\r
94	WRITE_STATUS = TRUE\r
95	WRITE_LOCK_CAP = TRUE\r
96	WRITE_LOCK_STATUS = TRUE\r
97	READ_DISABLED_CAP = TRUE\r
98	READ_ENABLED_CAP = TRUE\r
99	READ_STATUS = TRUE\r
100	READ_LOCK_CAP = TRUE\r
101	READ_LOCK_STATUS = TRUE\r
102	\r
103	APRIORI DXE {\r
104	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
105	INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf\r
106	}\r
107	INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
108	INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
109	INF ArmPlatformPkg/ArmVirtualizationPkg/VirtFdtDxe/VirtFdtDxe.inf\r
110	\r
111	#\r
112	# PI DXE Drivers producing Architectural Protocols (EFI Services)\r
113	#\r
114	INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
115	INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
116	INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
117	INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
118	INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
119	INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
120	INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
121	INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
122	INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
123	INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
124	INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
125	\r
126	#\r
127	# Multiple Console IO support\r
128	#\r
129	INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
130	INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
131	INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
132	INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
133	INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
134	\r
135	INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
136	INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf\r
137	INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
138	INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
139	\r
140	#\r
141	# FAT filesystem + GPT/MBR partitioning\r
142	#\r
143	INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
144	INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
145	INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
146	INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
147	\r
148	#\r
149	# Platform Driver\r
150	#\r
151	INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf\r
152	INF OvmfPkg/VirtioNetDxe/VirtioNet.inf\r
153	INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf\r
154	\r
155	#\r
156	# UEFI application (Shell Embedded Boot Loader)\r
157	#\r
158	INF ShellBinPkg/UefiShell/UefiShell.inf\r
159	\r
160	#\r
161	# Bds\r
162	#\r
163	INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
43ac100e OM	164	!ifdef INTEL_BDS\r
	165	INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
	166	INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
	167	INF IntelFrameworkModulePkg/Universal/BdsDxe/BdsDxe.inf\r
	168	!else\r
6f5872b1	169	INF ArmPlatformPkg/Bds/Bds.inf\r
43ac100e	170	!endif\r
6f5872b1 MC	171	\r
	172	#\r
	173	# Networking stack\r
	174	#\r
	175	INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
	176	INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
	177	INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
	178	INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
	179	INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
	180	INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
	181	INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
	182	INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
	183	INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
	184	INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
	185	INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
	186	INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
	187	\r
	188	#\r
	189	# SCSI Bus and Disk Driver\r
	190	#\r
	191	INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf\r
	192	INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf\r
	193	\r
	194	[FV.FVMAIN_COMPACT]\r
	195	FvAlignment = 16\r
	196	ERASE_POLARITY = 1\r
	197	MEMORY_MAPPED = TRUE\r
	198	STICKY_WRITE = TRUE\r
	199	LOCK_CAP = TRUE\r
	200	LOCK_STATUS = TRUE\r
	201	WRITE_DISABLED_CAP = TRUE\r
	202	WRITE_ENABLED_CAP = TRUE\r
	203	WRITE_STATUS = TRUE\r
	204	WRITE_LOCK_CAP = TRUE\r
	205	WRITE_LOCK_STATUS = TRUE\r
	206	READ_DISABLED_CAP = TRUE\r
	207	READ_ENABLED_CAP = TRUE\r
	208	READ_STATUS = TRUE\r
	209	READ_LOCK_CAP = TRUE\r
	210	READ_LOCK_STATUS = TRUE\r
	211	\r
	212	APRIORI PEI {\r
	213	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	214	}\r
	215	INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
	216	INF MdeModulePkg/Core/Pei/PeiMain.inf\r
	217	INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
	218	INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
	219	INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
	220	INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
	221	INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
	222	INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
	223	\r
	224	FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
	225	SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
	226	SECTION FV_IMAGE = FVMAIN\r
	227	}\r
	228	}\r
	229	\r
	230	\r
	231	################################################################################\r
	232	#\r
	233	# Rules are use with the [FV] section's module INF type to define\r
	234	# how an FFS file is created for a given INF file. The following Rule are the default\r
235	# rules for the different module type. User can add the customized rules to define the\r
236	# content of the FFS file.\r
237	#\r
238	################################################################################\r
239	\r
240	\r
241	############################################################################\r
242	# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
243	############################################################################\r
244	#\r
245	#[Rule.Common.DXE_DRIVER]\r
246	# FILE DRIVER = $(NAMED_GUID) {\r
247	# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
248	# COMPRESS PI_STD {\r
249	# GUIDED {\r
250	# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
251	# UI STRING="$(MODULE_NAME)" Optional\r
252	# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
253	# }\r
254	# }\r
255	# }\r
256	#\r
257	############################################################################\r
258	\r
259	[Rule.Common.SEC]\r
260	FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
261	TE TE Align = 128 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
262	}\r
263	\r
264	[Rule.Common.PEI_CORE]\r
265	FILE PEI_CORE = $(NAMED_GUID) {\r
266	TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
267	UI STRING ="$(MODULE_NAME)" Optional\r
268	}\r
269	\r
270	[Rule.Common.PEIM]\r
271	FILE PEIM = $(NAMED_GUID) {\r
272	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
273	TE TE Align = 8 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
274	UI STRING="$(MODULE_NAME)" Optional\r
275	}\r
276	\r
277	[Rule.Common.PEIM.TIANOCOMPRESSED]\r
278	FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
279	PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
280	GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
281	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
282	UI STRING="$(MODULE_NAME)" Optional\r
283	}\r
284	}\r
285	\r
286	[Rule.Common.DXE_CORE]\r
287	FILE DXE_CORE = $(NAMED_GUID) {\r
288	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
289	UI STRING="$(MODULE_NAME)" Optional\r
290	}\r
291	\r
292	[Rule.Common.UEFI_DRIVER]\r
293	FILE DRIVER = $(NAMED_GUID) {\r
294	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
295	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
296	UI STRING="$(MODULE_NAME)" Optional\r
297	}\r
298	\r
299	[Rule.Common.DXE_DRIVER]\r
300	FILE DRIVER = $(NAMED_GUID) {\r
301	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
302	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
303	UI STRING="$(MODULE_NAME)" Optional\r
304	}\r
305	\r
306	[Rule.Common.DXE_RUNTIME_DRIVER]\r
307	FILE DRIVER = $(NAMED_GUID) {\r
308	DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
309	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
310	UI STRING="$(MODULE_NAME)" Optional\r
311	}\r
312	\r
313	[Rule.Common.UEFI_APPLICATION]\r
314	FILE APPLICATION = $(NAMED_GUID) {\r
315	UI STRING ="$(MODULE_NAME)" Optional\r
316	PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
317	}\r
318	\r
319	[Rule.Common.UEFI_DRIVER.BINARY]\r
320	FILE DRIVER = $(NAMED_GUID) {\r
321	DXE_DEPEX DXE_DEPEX Optional \|.depex\r
322	PE32 PE32 \|.efi\r
323	UI STRING="$(MODULE_NAME)" Optional\r
324	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
325	}\r
326	\r
327	[Rule.Common.UEFI_APPLICATION.BINARY]\r
328	FILE APPLICATION = $(NAMED_GUID) {\r
329	PE32 PE32 \|.efi\r
330	UI STRING="$(MODULE_NAME)" Optional\r
331	VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
332	}\r
333	\r
334	[Rule.Common.USER_DEFINED.ACPITABLE]\r
335	FILE FREEFORM = $(NAMED_GUID) {\r
336	RAW ACPI \|.acpi\r
337	RAW ASL \|.aml\r
338	UI STRING="$(MODULE_NAME)" Optional\r
339	}\r