]>
Commit | Line | Data |
---|---|---|
9060e3ec | 1 | /** @file\r |
2 | PCI emumeration support functions implementation for PCI Bus module.\r | |
3 | \r | |
48495aae | 4 | Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>\r |
25a26646 | 5 | (C) Copyright 2015 Hewlett Packard Enterprise Development LP<BR>\r |
cd5ebaa0 | 6 | This program and the accompanying materials\r |
9060e3ec | 7 | are licensed and made available under the terms and conditions of the BSD License\r |
8 | which accompanies this distribution. The full text of the license may be found at\r | |
9 | http://opensource.org/licenses/bsd-license.php\r | |
10 | \r | |
11 | THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r | |
12 | WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r | |
13 | \r | |
14 | **/\r | |
15 | \r | |
16 | #include "PciBus.h"\r | |
17 | \r | |
8db6a82c RN |
18 | extern CHAR16 *mBarTypeStr[];\r |
19 | \r | |
9060e3ec | 20 | /**\r |
21 | This routine is used to check whether the pci device is present.\r | |
22 | \r | |
23 | @param PciRootBridgeIo Pointer to instance of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.\r | |
24 | @param Pci Output buffer for PCI device configuration space.\r | |
25 | @param Bus PCI bus NO.\r | |
26 | @param Device PCI device NO.\r | |
27 | @param Func PCI Func NO.\r | |
28 | \r | |
29 | @retval EFI_NOT_FOUND PCI device not present.\r | |
30 | @retval EFI_SUCCESS PCI device is found.\r | |
31 | \r | |
32 | **/\r | |
33 | EFI_STATUS\r | |
34 | PciDevicePresent (\r | |
35 | IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo,\r | |
36 | OUT PCI_TYPE00 *Pci,\r | |
37 | IN UINT8 Bus,\r | |
38 | IN UINT8 Device,\r | |
39 | IN UINT8 Func\r | |
40 | )\r | |
41 | {\r | |
42 | UINT64 Address;\r | |
43 | EFI_STATUS Status;\r | |
44 | \r | |
45 | //\r | |
46 | // Create PCI address map in terms of Bus, Device and Func\r | |
47 | //\r | |
48 | Address = EFI_PCI_ADDRESS (Bus, Device, Func, 0);\r | |
49 | \r | |
50 | //\r | |
51 | // Read the Vendor ID register\r | |
52 | //\r | |
53 | Status = PciRootBridgeIo->Pci.Read (\r | |
54 | PciRootBridgeIo,\r | |
55 | EfiPciWidthUint32,\r | |
56 | Address,\r | |
57 | 1,\r | |
58 | Pci\r | |
59 | );\r | |
60 | \r | |
61 | if (!EFI_ERROR (Status) && (Pci->Hdr).VendorId != 0xffff) {\r | |
62 | //\r | |
63 | // Read the entire config header for the device\r | |
64 | //\r | |
65 | Status = PciRootBridgeIo->Pci.Read (\r | |
66 | PciRootBridgeIo,\r | |
67 | EfiPciWidthUint32,\r | |
68 | Address,\r | |
69 | sizeof (PCI_TYPE00) / sizeof (UINT32),\r | |
70 | Pci\r | |
71 | );\r | |
72 | \r | |
73 | return EFI_SUCCESS;\r | |
74 | }\r | |
75 | \r | |
76 | return EFI_NOT_FOUND;\r | |
77 | }\r | |
78 | \r | |
79 | /**\r | |
80 | Collect all the resource information under this root bridge.\r | |
81 | \r | |
82 | A database that records all the information about pci device subject to this\r | |
83 | root bridge will then be created.\r | |
84 | \r | |
85 | @param Bridge Parent bridge instance.\r | |
86 | @param StartBusNumber Bus number of begining.\r | |
87 | \r | |
88 | @retval EFI_SUCCESS PCI device is found.\r | |
89 | @retval other Some error occurred when reading PCI bridge information.\r | |
90 | \r | |
91 | **/\r | |
92 | EFI_STATUS\r | |
93 | PciPciDeviceInfoCollector (\r | |
94 | IN PCI_IO_DEVICE *Bridge,\r | |
95 | IN UINT8 StartBusNumber\r | |
96 | )\r | |
97 | {\r | |
98 | EFI_STATUS Status;\r | |
99 | PCI_TYPE00 Pci;\r | |
100 | UINT8 Device;\r | |
101 | UINT8 Func;\r | |
102 | UINT8 SecBus;\r | |
103 | PCI_IO_DEVICE *PciIoDevice;\r | |
104 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
105 | \r | |
106 | Status = EFI_SUCCESS;\r | |
107 | SecBus = 0;\r | |
108 | \r | |
109 | for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {\r | |
110 | \r | |
111 | for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {\r | |
112 | \r | |
113 | //\r | |
114 | // Check to see whether PCI device is present\r | |
115 | //\r | |
116 | Status = PciDevicePresent (\r | |
117 | Bridge->PciRootBridgeIo,\r | |
118 | &Pci,\r | |
119 | (UINT8) StartBusNumber,\r | |
120 | (UINT8) Device,\r | |
121 | (UINT8) Func\r | |
122 | );\r | |
25a26646 JS |
123 | \r |
124 | if (EFI_ERROR (Status) && Func == 0) {\r | |
125 | //\r | |
126 | // go to next device if there is no Function 0\r | |
127 | //\r | |
128 | break;\r | |
129 | }\r | |
130 | \r | |
9060e3ec | 131 | if (!EFI_ERROR (Status)) {\r |
132 | \r | |
133 | //\r | |
134 | // Call back to host bridge function\r | |
135 | //\r | |
136 | PreprocessController (Bridge, (UINT8) StartBusNumber, Device, Func, EfiPciBeforeResourceCollection);\r | |
137 | \r | |
138 | //\r | |
139 | // Collect all the information about the PCI device discovered\r | |
140 | //\r | |
141 | Status = PciSearchDevice (\r | |
142 | Bridge,\r | |
143 | &Pci,\r | |
144 | (UINT8) StartBusNumber,\r | |
145 | Device,\r | |
146 | Func,\r | |
147 | &PciIoDevice\r | |
148 | );\r | |
149 | \r | |
150 | //\r | |
151 | // Recursively scan PCI busses on the other side of PCI-PCI bridges\r | |
152 | //\r | |
153 | //\r | |
154 | if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci) || IS_CARDBUS_BRIDGE (&Pci))) {\r | |
155 | \r | |
156 | //\r | |
157 | // If it is PPB, we need to get the secondary bus to continue the enumeration\r | |
158 | //\r | |
159 | PciIo = &(PciIoDevice->PciIo);\r | |
160 | \r | |
161 | Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, PCI_BRIDGE_SECONDARY_BUS_REGISTER_OFFSET, 1, &SecBus);\r | |
162 | \r | |
163 | if (EFI_ERROR (Status)) {\r | |
164 | return Status;\r | |
165 | }\r | |
166 | \r | |
c28306c3 MM |
167 | //\r |
168 | // Ensure secondary bus number is greater than the primary bus number to avoid\r | |
169 | // any potential dead loop when PcdPciDisableBusEnumeration is set to TRUE\r | |
170 | //\r | |
171 | if (SecBus <= StartBusNumber) {\r | |
172 | break;\r | |
173 | }\r | |
174 | \r | |
9060e3ec | 175 | //\r |
176 | // Get resource padding for PPB\r | |
177 | //\r | |
178 | GetResourcePaddingPpb (PciIoDevice);\r | |
179 | \r | |
180 | //\r | |
181 | // Deep enumerate the next level bus\r | |
182 | //\r | |
183 | Status = PciPciDeviceInfoCollector (\r | |
184 | PciIoDevice,\r | |
185 | (UINT8) (SecBus)\r | |
186 | );\r | |
187 | \r | |
188 | }\r | |
189 | \r | |
190 | if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {\r | |
191 | \r | |
192 | //\r | |
193 | // Skip sub functions, this is not a multi function device\r | |
194 | //\r | |
195 | Func = PCI_MAX_FUNC;\r | |
196 | }\r | |
197 | }\r | |
198 | \r | |
199 | }\r | |
200 | }\r | |
201 | \r | |
202 | return EFI_SUCCESS;\r | |
203 | }\r | |
204 | \r | |
205 | /**\r | |
206 | Seach required device and create PCI device instance.\r | |
207 | \r | |
208 | @param Bridge Parent bridge instance.\r | |
209 | @param Pci Input PCI device information block.\r | |
210 | @param Bus PCI bus NO.\r | |
211 | @param Device PCI device NO.\r | |
212 | @param Func PCI func NO.\r | |
213 | @param PciDevice Output of searched PCI device instance.\r | |
214 | \r | |
215 | @retval EFI_SUCCESS Successfully created PCI device instance.\r | |
216 | @retval EFI_OUT_OF_RESOURCES Cannot get PCI device information.\r | |
217 | \r | |
218 | **/\r | |
219 | EFI_STATUS\r | |
220 | PciSearchDevice (\r | |
221 | IN PCI_IO_DEVICE *Bridge,\r | |
222 | IN PCI_TYPE00 *Pci,\r | |
223 | IN UINT8 Bus,\r | |
224 | IN UINT8 Device,\r | |
225 | IN UINT8 Func,\r | |
226 | OUT PCI_IO_DEVICE **PciDevice\r | |
227 | )\r | |
228 | {\r | |
229 | PCI_IO_DEVICE *PciIoDevice;\r | |
230 | \r | |
231 | PciIoDevice = NULL;\r | |
232 | \r | |
8db6a82c RN |
233 | DEBUG ((\r |
234 | EFI_D_INFO,\r | |
235 | "PciBus: Discovered %s @ [%02x|%02x|%02x]\n",\r | |
236 | IS_PCI_BRIDGE (Pci) ? L"PPB" :\r | |
237 | IS_CARDBUS_BRIDGE (Pci) ? L"P2C" :\r | |
238 | L"PCI",\r | |
239 | Bus, Device, Func\r | |
240 | ));\r | |
241 | \r | |
9060e3ec | 242 | if (!IS_PCI_BRIDGE (Pci)) {\r |
243 | \r | |
244 | if (IS_CARDBUS_BRIDGE (Pci)) {\r | |
245 | PciIoDevice = GatherP2CInfo (\r | |
246 | Bridge,\r | |
247 | Pci,\r | |
248 | Bus,\r | |
249 | Device,\r | |
250 | Func\r | |
251 | );\r | |
252 | if ((PciIoDevice != NULL) && gFullEnumeration) {\r | |
253 | InitializeP2C (PciIoDevice);\r | |
254 | }\r | |
255 | } else {\r | |
256 | \r | |
257 | //\r | |
258 | // Create private data for Pci Device\r | |
259 | //\r | |
260 | PciIoDevice = GatherDeviceInfo (\r | |
261 | Bridge,\r | |
262 | Pci,\r | |
263 | Bus,\r | |
264 | Device,\r | |
265 | Func\r | |
266 | );\r | |
267 | \r | |
268 | }\r | |
269 | \r | |
270 | } else {\r | |
271 | \r | |
272 | //\r | |
273 | // Create private data for PPB\r | |
274 | //\r | |
275 | PciIoDevice = GatherPpbInfo (\r | |
276 | Bridge,\r | |
277 | Pci,\r | |
278 | Bus,\r | |
279 | Device,\r | |
280 | Func\r | |
281 | );\r | |
282 | \r | |
283 | //\r | |
284 | // Special initialization for PPB including making the PPB quiet\r | |
285 | //\r | |
286 | if ((PciIoDevice != NULL) && gFullEnumeration) {\r | |
287 | InitializePpb (PciIoDevice);\r | |
288 | }\r | |
289 | }\r | |
290 | \r | |
291 | if (PciIoDevice == NULL) {\r | |
292 | return EFI_OUT_OF_RESOURCES;\r | |
293 | }\r | |
294 | \r | |
295 | //\r | |
296 | // Update the bar information for this PCI device so as to support some specific device\r | |
297 | //\r | |
298 | UpdatePciInfo (PciIoDevice);\r | |
299 | \r | |
300 | if (PciIoDevice->DevicePath == NULL) {\r | |
301 | return EFI_OUT_OF_RESOURCES;\r | |
302 | }\r | |
303 | \r | |
304 | //\r | |
305 | // Detect this function has option rom\r | |
306 | //\r | |
307 | if (gFullEnumeration) {\r | |
308 | \r | |
309 | if (!IS_CARDBUS_BRIDGE (Pci)) {\r | |
310 | \r | |
311 | GetOpRomInfo (PciIoDevice);\r | |
312 | \r | |
313 | }\r | |
314 | \r | |
315 | ResetPowerManagementFeature (PciIoDevice);\r | |
316 | \r | |
317 | }\r | |
318 | \r | |
319 | //\r | |
320 | // Insert it into a global tree for future reference\r | |
321 | //\r | |
322 | InsertPciDevice (Bridge, PciIoDevice);\r | |
323 | \r | |
324 | //\r | |
325 | // Determine PCI device attributes\r | |
326 | //\r | |
327 | \r | |
328 | if (PciDevice != NULL) {\r | |
329 | *PciDevice = PciIoDevice;\r | |
330 | }\r | |
331 | \r | |
332 | return EFI_SUCCESS;\r | |
333 | }\r | |
334 | \r | |
f67bd32d RN |
335 | /**\r |
336 | Dump the PPB padding resource information.\r | |
337 | \r | |
338 | @param PciIoDevice PCI IO instance.\r | |
339 | @param ResourceType The desired resource type to dump.\r | |
340 | PciBarTypeUnknown means to dump all types of resources.\r | |
341 | **/\r | |
342 | VOID\r | |
343 | DumpPpbPaddingResource (\r | |
344 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
345 | IN PCI_BAR_TYPE ResourceType\r | |
346 | )\r | |
347 | {\r | |
348 | EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptor;\r | |
349 | PCI_BAR_TYPE Type;\r | |
350 | \r | |
351 | if (PciIoDevice->ResourcePaddingDescriptors == NULL) {\r | |
352 | return;\r | |
353 | }\r | |
354 | \r | |
355 | if (ResourceType == PciBarTypeIo16 || ResourceType == PciBarTypeIo32) {\r | |
356 | ResourceType = PciBarTypeIo;\r | |
357 | }\r | |
358 | \r | |
359 | for (Descriptor = PciIoDevice->ResourcePaddingDescriptors; Descriptor->Desc != ACPI_END_TAG_DESCRIPTOR; Descriptor++) {\r | |
360 | \r | |
361 | Type = PciBarTypeUnknown;\r | |
362 | if (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_IO) {\r | |
363 | Type = PciBarTypeIo;\r | |
364 | } else if (Descriptor->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR && Descriptor->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {\r | |
365 | \r | |
366 | if (Descriptor->AddrSpaceGranularity == 32) {\r | |
367 | //\r | |
368 | // prefechable\r | |
369 | //\r | |
370 | if (Descriptor->SpecificFlag == EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) {\r | |
371 | Type = PciBarTypePMem32;\r | |
372 | }\r | |
373 | \r | |
374 | //\r | |
375 | // Non-prefechable\r | |
376 | //\r | |
377 | if (Descriptor->SpecificFlag == 0) {\r | |
378 | Type = PciBarTypeMem32;\r | |
379 | }\r | |
380 | }\r | |
381 | \r | |
382 | if (Descriptor->AddrSpaceGranularity == 64) {\r | |
383 | //\r | |
384 | // prefechable\r | |
385 | //\r | |
386 | if (Descriptor->SpecificFlag == EFI_ACPI_MEMORY_RESOURCE_SPECIFIC_FLAG_CACHEABLE_PREFETCHABLE) {\r | |
387 | Type = PciBarTypePMem64;\r | |
388 | }\r | |
389 | \r | |
390 | //\r | |
391 | // Non-prefechable\r | |
392 | //\r | |
393 | if (Descriptor->SpecificFlag == 0) {\r | |
394 | Type = PciBarTypeMem64;\r | |
395 | }\r | |
396 | }\r | |
397 | }\r | |
398 | \r | |
399 | if ((Type != PciBarTypeUnknown) && ((ResourceType == PciBarTypeUnknown) || (ResourceType == Type))) {\r | |
400 | DEBUG ((\r | |
401 | EFI_D_INFO,\r | |
402 | " Padding: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx\n",\r | |
403 | mBarTypeStr[Type], Descriptor->AddrRangeMax, Descriptor->AddrLen\r | |
404 | ));\r | |
405 | }\r | |
406 | }\r | |
407 | \r | |
408 | }\r | |
409 | \r | |
8db6a82c RN |
410 | /**\r |
411 | Dump the PCI BAR information.\r | |
412 | \r | |
413 | @param PciIoDevice PCI IO instance.\r | |
414 | **/\r | |
415 | VOID\r | |
416 | DumpPciBars (\r | |
417 | IN PCI_IO_DEVICE *PciIoDevice\r | |
418 | )\r | |
419 | {\r | |
420 | UINTN Index;\r | |
421 | \r | |
422 | for (Index = 0; Index < PCI_MAX_BAR; Index++) {\r | |
423 | if (PciIoDevice->PciBar[Index].BarType == PciBarTypeUnknown) {\r | |
424 | continue;\r | |
425 | }\r | |
426 | \r | |
427 | DEBUG ((\r | |
428 | EFI_D_INFO,\r | |
980050bc | 429 | " BAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset = 0x%02x\n",\r |
8db6a82c RN |
430 | Index, mBarTypeStr[MIN (PciIoDevice->PciBar[Index].BarType, PciBarTypeMaxType)],\r |
431 | PciIoDevice->PciBar[Index].Alignment, PciIoDevice->PciBar[Index].Length, PciIoDevice->PciBar[Index].Offset\r | |
432 | ));\r | |
433 | }\r | |
434 | \r | |
435 | for (Index = 0; Index < PCI_MAX_BAR; Index++) {\r | |
436 | if ((PciIoDevice->VfPciBar[Index].BarType == PciBarTypeUnknown) && (PciIoDevice->VfPciBar[Index].Length == 0)) {\r | |
437 | continue;\r | |
438 | }\r | |
439 | \r | |
440 | DEBUG ((\r | |
441 | EFI_D_INFO,\r | |
980050bc | 442 | " VFBAR[%d]: Type = %s; Alignment = 0x%lx;\tLength = 0x%lx;\tOffset = 0x%02x\n",\r |
8db6a82c RN |
443 | Index, mBarTypeStr[MIN (PciIoDevice->VfPciBar[Index].BarType, PciBarTypeMaxType)],\r |
444 | PciIoDevice->VfPciBar[Index].Alignment, PciIoDevice->VfPciBar[Index].Length, PciIoDevice->VfPciBar[Index].Offset\r | |
445 | ));\r | |
446 | }\r | |
447 | DEBUG ((EFI_D_INFO, "\n"));\r | |
448 | }\r | |
449 | \r | |
9060e3ec | 450 | /**\r |
451 | Create PCI device instance for PCI device.\r | |
452 | \r | |
453 | @param Bridge Parent bridge instance.\r | |
454 | @param Pci Input PCI device information block.\r | |
455 | @param Bus PCI device Bus NO.\r | |
456 | @param Device PCI device Device NO.\r | |
457 | @param Func PCI device's func NO.\r | |
458 | \r | |
459 | @return Created PCI device instance.\r | |
460 | \r | |
461 | **/\r | |
462 | PCI_IO_DEVICE *\r | |
463 | GatherDeviceInfo (\r | |
464 | IN PCI_IO_DEVICE *Bridge,\r | |
465 | IN PCI_TYPE00 *Pci,\r | |
466 | IN UINT8 Bus,\r | |
467 | IN UINT8 Device,\r | |
468 | IN UINT8 Func\r | |
469 | )\r | |
470 | {\r | |
471 | UINTN Offset;\r | |
472 | UINTN BarIndex;\r | |
473 | PCI_IO_DEVICE *PciIoDevice;\r | |
9060e3ec | 474 | \r |
9060e3ec | 475 | PciIoDevice = CreatePciIoDevice (\r |
d4048391 | 476 | Bridge,\r |
9060e3ec | 477 | Pci,\r |
478 | Bus,\r | |
479 | Device,\r | |
480 | Func\r | |
481 | );\r | |
482 | \r | |
483 | if (PciIoDevice == NULL) {\r | |
484 | return NULL;\r | |
485 | }\r | |
486 | \r | |
9060e3ec | 487 | //\r |
488 | // If it is a full enumeration, disconnect the device in advance\r | |
489 | //\r | |
490 | if (gFullEnumeration) {\r | |
491 | \r | |
492 | PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);\r | |
493 | \r | |
494 | }\r | |
495 | \r | |
496 | //\r | |
497 | // Start to parse the bars\r | |
498 | //\r | |
499 | for (Offset = 0x10, BarIndex = 0; Offset <= 0x24 && BarIndex < PCI_MAX_BAR; BarIndex++) {\r | |
500 | Offset = PciParseBar (PciIoDevice, Offset, BarIndex);\r | |
501 | }\r | |
502 | \r | |
503 | //\r | |
504 | // Parse the SR-IOV VF bars\r | |
505 | //\r | |
d4048391 | 506 | if (PcdGetBool (PcdSrIovSupport) && PciIoDevice->SrIovCapabilityOffset != 0) {\r |
9060e3ec | 507 | for (Offset = PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_BAR0, BarIndex = 0;\r |
508 | Offset <= PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_BAR5;\r | |
509 | BarIndex++) {\r | |
510 | \r | |
511 | ASSERT (BarIndex < PCI_MAX_BAR);\r | |
512 | Offset = PciIovParseVfBar (PciIoDevice, Offset, BarIndex);\r | |
513 | }\r | |
514 | }\r | |
8db6a82c RN |
515 | \r |
516 | DEBUG_CODE (DumpPciBars (PciIoDevice););\r | |
9060e3ec | 517 | return PciIoDevice;\r |
518 | }\r | |
519 | \r | |
520 | /**\r | |
521 | Create PCI device instance for PCI-PCI bridge.\r | |
522 | \r | |
523 | @param Bridge Parent bridge instance.\r | |
524 | @param Pci Input PCI device information block.\r | |
525 | @param Bus PCI device Bus NO.\r | |
526 | @param Device PCI device Device NO.\r | |
527 | @param Func PCI device's func NO.\r | |
528 | \r | |
529 | @return Created PCI device instance.\r | |
530 | \r | |
531 | **/\r | |
532 | PCI_IO_DEVICE *\r | |
533 | GatherPpbInfo (\r | |
534 | IN PCI_IO_DEVICE *Bridge,\r | |
535 | IN PCI_TYPE00 *Pci,\r | |
536 | IN UINT8 Bus,\r | |
537 | IN UINT8 Device,\r | |
538 | IN UINT8 Func\r | |
539 | )\r | |
540 | {\r | |
9060e3ec | 541 | PCI_IO_DEVICE *PciIoDevice;\r |
542 | EFI_STATUS Status;\r | |
543 | UINT8 Value;\r | |
544 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
545 | UINT8 Temp;\r | |
07bcff9d | 546 | UINT32 PMemBaseLimit;\r |
547 | UINT16 PrefetchableMemoryBase;\r | |
548 | UINT16 PrefetchableMemoryLimit;\r | |
9060e3ec | 549 | \r |
9060e3ec | 550 | PciIoDevice = CreatePciIoDevice (\r |
d4048391 | 551 | Bridge,\r |
9060e3ec | 552 | Pci,\r |
553 | Bus,\r | |
554 | Device,\r | |
555 | Func\r | |
556 | );\r | |
557 | \r | |
558 | if (PciIoDevice == NULL) {\r | |
559 | return NULL;\r | |
560 | }\r | |
561 | \r | |
9060e3ec | 562 | if (gFullEnumeration) {\r |
563 | PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);\r | |
564 | \r | |
565 | //\r | |
566 | // Initalize the bridge control register\r | |
567 | //\r | |
568 | PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_BITS_OWNED);\r | |
569 | \r | |
570 | }\r | |
571 | \r | |
572 | //\r | |
573 | // PPB can have two BARs\r | |
574 | //\r | |
575 | if (PciParseBar (PciIoDevice, 0x10, PPB_BAR_0) == 0x14) {\r | |
576 | //\r | |
577 | // Not 64-bit bar\r | |
578 | //\r | |
579 | PciParseBar (PciIoDevice, 0x14, PPB_BAR_1);\r | |
580 | }\r | |
581 | \r | |
582 | PciIo = &PciIoDevice->PciIo;\r | |
583 | \r | |
584 | //\r | |
585 | // Test whether it support 32 decode or not\r | |
586 | //\r | |
587 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);\r | |
588 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);\r | |
589 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);\r | |
590 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);\r | |
591 | \r | |
592 | if (Value != 0) {\r | |
593 | if ((Value & 0x01) != 0) {\r | |
594 | PciIoDevice->Decodes |= EFI_BRIDGE_IO32_DECODE_SUPPORTED;\r | |
595 | } else {\r | |
596 | PciIoDevice->Decodes |= EFI_BRIDGE_IO16_DECODE_SUPPORTED;\r | |
597 | }\r | |
598 | }\r | |
599 | \r | |
1ef26783 | 600 | //\r |
601 | // if PcdPciBridgeIoAlignmentProbe is TRUE, PCI bus driver probes\r | |
ed356b9e | 602 | // PCI bridge supporting non-standard I/O window alignment less than 4K.\r |
1ef26783 | 603 | //\r |
604 | \r | |
605 | PciIoDevice->BridgeIoAlignment = 0xFFF;\r | |
606 | if (FeaturePcdGet (PcdPciBridgeIoAlignmentProbe)) {\r | |
607 | //\r | |
608 | // Check any bits of bit 3-1 of I/O Base Register are writable.\r | |
ed356b9e | 609 | // if so, it is assumed non-standard I/O window alignment is supported by this bridge.\r |
1ef26783 | 610 | // Per spec, bit 3-1 of I/O Base Register are reserved bits, so its content can't be assumed.\r |
611 | //\r | |
f00b5d83 | 612 | Value = (UINT8)(Temp ^ (BIT3 | BIT2 | BIT1));\r |
1ef26783 | 613 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);\r |
614 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Value);\r | |
615 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &Temp);\r | |
f00b5d83 | 616 | Value = (UINT8)((Value ^ Temp) & (BIT3 | BIT2 | BIT1));\r |
1ef26783 | 617 | switch (Value) {\r |
618 | case BIT3:\r | |
619 | PciIoDevice->BridgeIoAlignment = 0x7FF;\r | |
620 | break;\r | |
621 | case BIT3 | BIT2:\r | |
622 | PciIoDevice->BridgeIoAlignment = 0x3FF;\r | |
623 | break;\r | |
624 | case BIT3 | BIT2 | BIT1:\r | |
625 | PciIoDevice->BridgeIoAlignment = 0x1FF;\r | |
626 | break;\r | |
627 | }\r | |
628 | }\r | |
629 | \r | |
9060e3ec | 630 | Status = BarExisted (\r |
631 | PciIoDevice,\r | |
632 | 0x24,\r | |
633 | NULL,\r | |
07bcff9d | 634 | &PMemBaseLimit\r |
9060e3ec | 635 | );\r |
636 | \r | |
637 | //\r | |
638 | // Test if it supports 64 memory or not\r | |
639 | //\r | |
07bcff9d | 640 | // The bottom 4 bits of both the Prefetchable Memory Base and Prefetchable Memory Limit\r |
641 | // registers:\r | |
642 | // 0 - the bridge supports only 32 bit addresses.\r | |
643 | // 1 - the bridge supports 64-bit addresses.\r | |
644 | //\r | |
571e9831 | 645 | PrefetchableMemoryBase = (UINT16)(PMemBaseLimit & 0xffff);\r |
646 | PrefetchableMemoryLimit = (UINT16)(PMemBaseLimit >> 16);\r | |
07bcff9d | 647 | if (!EFI_ERROR (Status) &&\r |
648 | (PrefetchableMemoryBase & 0x000f) == 0x0001 &&\r | |
649 | (PrefetchableMemoryLimit & 0x000f) == 0x0001) {\r | |
9060e3ec | 650 | Status = BarExisted (\r |
651 | PciIoDevice,\r | |
652 | 0x28,\r | |
653 | NULL,\r | |
654 | NULL\r | |
655 | );\r | |
656 | \r | |
657 | if (!EFI_ERROR (Status)) {\r | |
658 | PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;\r | |
659 | PciIoDevice->Decodes |= EFI_BRIDGE_PMEM64_DECODE_SUPPORTED;\r | |
660 | } else {\r | |
661 | PciIoDevice->Decodes |= EFI_BRIDGE_PMEM32_DECODE_SUPPORTED;\r | |
662 | }\r | |
663 | }\r | |
664 | \r | |
665 | //\r | |
666 | // Memory 32 code is required for ppb\r | |
667 | //\r | |
668 | PciIoDevice->Decodes |= EFI_BRIDGE_MEM32_DECODE_SUPPORTED;\r | |
669 | \r | |
670 | GetResourcePaddingPpb (PciIoDevice);\r | |
671 | \r | |
f67bd32d RN |
672 | DEBUG_CODE (\r |
673 | DumpPpbPaddingResource (PciIoDevice, PciBarTypeUnknown);\r | |
674 | DumpPciBars (PciIoDevice);\r | |
675 | );\r | |
8db6a82c | 676 | \r |
9060e3ec | 677 | return PciIoDevice;\r |
678 | }\r | |
679 | \r | |
680 | \r | |
681 | /**\r | |
682 | Create PCI device instance for PCI Card bridge device.\r | |
683 | \r | |
684 | @param Bridge Parent bridge instance.\r | |
685 | @param Pci Input PCI device information block.\r | |
686 | @param Bus PCI device Bus NO.\r | |
687 | @param Device PCI device Device NO.\r | |
688 | @param Func PCI device's func NO.\r | |
689 | \r | |
690 | @return Created PCI device instance.\r | |
691 | \r | |
692 | **/\r | |
693 | PCI_IO_DEVICE *\r | |
694 | GatherP2CInfo (\r | |
695 | IN PCI_IO_DEVICE *Bridge,\r | |
696 | IN PCI_TYPE00 *Pci,\r | |
697 | IN UINT8 Bus,\r | |
698 | IN UINT8 Device,\r | |
699 | IN UINT8 Func\r | |
700 | )\r | |
701 | {\r | |
9060e3ec | 702 | PCI_IO_DEVICE *PciIoDevice;\r |
703 | \r | |
9060e3ec | 704 | PciIoDevice = CreatePciIoDevice (\r |
d4048391 | 705 | Bridge,\r |
9060e3ec | 706 | Pci,\r |
707 | Bus,\r | |
708 | Device,\r | |
709 | Func\r | |
710 | );\r | |
711 | \r | |
712 | if (PciIoDevice == NULL) {\r | |
713 | return NULL;\r | |
714 | }\r | |
715 | \r | |
9060e3ec | 716 | if (gFullEnumeration) {\r |
717 | PCI_DISABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_BITS_OWNED);\r | |
718 | \r | |
719 | //\r | |
720 | // Initalize the bridge control register\r | |
721 | //\r | |
722 | PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCCARD_BRIDGE_CONTROL_BITS_OWNED);\r | |
723 | }\r | |
724 | \r | |
725 | //\r | |
726 | // P2C only has one bar that is in 0x10\r | |
727 | //\r | |
728 | PciParseBar (PciIoDevice, 0x10, P2C_BAR_0);\r | |
729 | \r | |
730 | //\r | |
731 | // Read PciBar information from the bar register\r | |
732 | //\r | |
733 | GetBackPcCardBar (PciIoDevice);\r | |
734 | PciIoDevice->Decodes = EFI_BRIDGE_MEM32_DECODE_SUPPORTED |\r | |
735 | EFI_BRIDGE_PMEM32_DECODE_SUPPORTED |\r | |
736 | EFI_BRIDGE_IO32_DECODE_SUPPORTED;\r | |
737 | \r | |
8db6a82c RN |
738 | DEBUG_CODE (DumpPciBars (PciIoDevice););\r |
739 | \r | |
9060e3ec | 740 | return PciIoDevice;\r |
741 | }\r | |
742 | \r | |
743 | /**\r | |
744 | Create device path for pci deivce.\r | |
745 | \r | |
746 | @param ParentDevicePath Parent bridge's path.\r | |
747 | @param PciIoDevice Pci device instance.\r | |
748 | \r | |
749 | @return Device path protocol instance for specific pci device.\r | |
750 | \r | |
751 | **/\r | |
752 | EFI_DEVICE_PATH_PROTOCOL *\r | |
753 | CreatePciDevicePath (\r | |
754 | IN EFI_DEVICE_PATH_PROTOCOL *ParentDevicePath,\r | |
755 | IN PCI_IO_DEVICE *PciIoDevice\r | |
756 | )\r | |
757 | {\r | |
758 | \r | |
759 | PCI_DEVICE_PATH PciNode;\r | |
760 | \r | |
761 | //\r | |
762 | // Create PCI device path\r | |
763 | //\r | |
764 | PciNode.Header.Type = HARDWARE_DEVICE_PATH;\r | |
765 | PciNode.Header.SubType = HW_PCI_DP;\r | |
766 | SetDevicePathNodeLength (&PciNode.Header, sizeof (PciNode));\r | |
767 | \r | |
768 | PciNode.Device = PciIoDevice->DeviceNumber;\r | |
769 | PciNode.Function = PciIoDevice->FunctionNumber;\r | |
770 | PciIoDevice->DevicePath = AppendDevicePathNode (ParentDevicePath, &PciNode.Header);\r | |
771 | \r | |
772 | return PciIoDevice->DevicePath;\r | |
773 | }\r | |
774 | \r | |
775 | /**\r | |
776 | Check whether the PCI IOV VF bar is existed or not.\r | |
777 | \r | |
778 | @param PciIoDevice A pointer to the PCI_IO_DEVICE.\r | |
779 | @param Offset The offset.\r | |
780 | @param BarLengthValue The bar length value returned.\r | |
781 | @param OriginalBarValue The original bar value returned.\r | |
782 | \r | |
783 | @retval EFI_NOT_FOUND The bar doesn't exist.\r | |
784 | @retval EFI_SUCCESS The bar exist.\r | |
785 | \r | |
786 | **/\r | |
787 | EFI_STATUS\r | |
788 | VfBarExisted (\r | |
789 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
790 | IN UINTN Offset,\r | |
791 | OUT UINT32 *BarLengthValue,\r | |
792 | OUT UINT32 *OriginalBarValue\r | |
793 | )\r | |
794 | {\r | |
795 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
796 | UINT32 OriginalValue;\r | |
797 | UINT32 Value;\r | |
798 | EFI_TPL OldTpl;\r | |
799 | \r | |
800 | //\r | |
801 | // Ensure it is called properly\r | |
802 | //\r | |
803 | ASSERT (PciIoDevice->SrIovCapabilityOffset != 0);\r | |
804 | if (PciIoDevice->SrIovCapabilityOffset == 0) {\r | |
805 | return EFI_NOT_FOUND;\r | |
806 | }\r | |
807 | \r | |
808 | PciIo = &PciIoDevice->PciIo;\r | |
809 | \r | |
810 | //\r | |
811 | // Preserve the original value\r | |
812 | //\r | |
813 | \r | |
814 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &OriginalValue);\r | |
815 | \r | |
816 | //\r | |
817 | // Raise TPL to high level to disable timer interrupt while the BAR is probed\r | |
818 | //\r | |
819 | OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);\r | |
820 | \r | |
821 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &gAllOne);\r | |
822 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &Value);\r | |
823 | \r | |
824 | //\r | |
825 | // Write back the original value\r | |
826 | //\r | |
827 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT32)Offset, 1, &OriginalValue);\r | |
828 | \r | |
829 | //\r | |
830 | // Restore TPL to its original level\r | |
831 | //\r | |
832 | gBS->RestoreTPL (OldTpl);\r | |
833 | \r | |
834 | if (BarLengthValue != NULL) {\r | |
835 | *BarLengthValue = Value;\r | |
836 | }\r | |
837 | \r | |
838 | if (OriginalBarValue != NULL) {\r | |
839 | *OriginalBarValue = OriginalValue;\r | |
840 | }\r | |
841 | \r | |
842 | if (Value == 0) {\r | |
843 | return EFI_NOT_FOUND;\r | |
844 | } else {\r | |
845 | return EFI_SUCCESS;\r | |
846 | }\r | |
847 | }\r | |
848 | \r | |
849 | /**\r | |
850 | Check whether the bar is existed or not.\r | |
851 | \r | |
852 | @param PciIoDevice A pointer to the PCI_IO_DEVICE.\r | |
853 | @param Offset The offset.\r | |
854 | @param BarLengthValue The bar length value returned.\r | |
855 | @param OriginalBarValue The original bar value returned.\r | |
856 | \r | |
857 | @retval EFI_NOT_FOUND The bar doesn't exist.\r | |
858 | @retval EFI_SUCCESS The bar exist.\r | |
859 | \r | |
860 | **/\r | |
861 | EFI_STATUS\r | |
862 | BarExisted (\r | |
863 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
864 | IN UINTN Offset,\r | |
865 | OUT UINT32 *BarLengthValue,\r | |
866 | OUT UINT32 *OriginalBarValue\r | |
867 | )\r | |
868 | {\r | |
869 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
870 | UINT32 OriginalValue;\r | |
871 | UINT32 Value;\r | |
872 | EFI_TPL OldTpl;\r | |
873 | \r | |
874 | PciIo = &PciIoDevice->PciIo;\r | |
875 | \r | |
876 | //\r | |
877 | // Preserve the original value\r | |
878 | //\r | |
879 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);\r | |
880 | \r | |
881 | //\r | |
882 | // Raise TPL to high level to disable timer interrupt while the BAR is probed\r | |
883 | //\r | |
884 | OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);\r | |
885 | \r | |
886 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &gAllOne);\r | |
887 | PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &Value);\r | |
888 | \r | |
889 | //\r | |
890 | // Write back the original value\r | |
891 | //\r | |
892 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, (UINT8) Offset, 1, &OriginalValue);\r | |
893 | \r | |
894 | //\r | |
895 | // Restore TPL to its original level\r | |
896 | //\r | |
897 | gBS->RestoreTPL (OldTpl);\r | |
898 | \r | |
899 | if (BarLengthValue != NULL) {\r | |
900 | *BarLengthValue = Value;\r | |
901 | }\r | |
902 | \r | |
903 | if (OriginalBarValue != NULL) {\r | |
904 | *OriginalBarValue = OriginalValue;\r | |
905 | }\r | |
906 | \r | |
907 | if (Value == 0) {\r | |
908 | return EFI_NOT_FOUND;\r | |
909 | } else {\r | |
910 | return EFI_SUCCESS;\r | |
911 | }\r | |
912 | }\r | |
913 | \r | |
914 | /**\r | |
915 | Test whether the device can support given attributes.\r | |
916 | \r | |
917 | @param PciIoDevice Pci device instance.\r | |
918 | @param Command Input command register value, and\r | |
919 | returned supported register value.\r | |
920 | @param BridgeControl Inout bridge control value for PPB or P2C, and\r | |
921 | returned supported bridge control value.\r | |
922 | @param OldCommand Returned and stored old command register offset.\r | |
923 | @param OldBridgeControl Returned and stored old Bridge control value for PPB or P2C.\r | |
924 | \r | |
925 | **/\r | |
926 | VOID\r | |
927 | PciTestSupportedAttribute (\r | |
928 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
929 | IN OUT UINT16 *Command,\r | |
930 | IN OUT UINT16 *BridgeControl,\r | |
931 | OUT UINT16 *OldCommand,\r | |
932 | OUT UINT16 *OldBridgeControl\r | |
933 | )\r | |
934 | {\r | |
935 | EFI_TPL OldTpl;\r | |
936 | \r | |
937 | //\r | |
938 | // Preserve the original value\r | |
939 | //\r | |
940 | PCI_READ_COMMAND_REGISTER (PciIoDevice, OldCommand);\r | |
941 | \r | |
942 | //\r | |
943 | // Raise TPL to high level to disable timer interrupt while the BAR is probed\r | |
944 | //\r | |
945 | OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);\r | |
946 | \r | |
947 | PCI_SET_COMMAND_REGISTER (PciIoDevice, *Command);\r | |
948 | PCI_READ_COMMAND_REGISTER (PciIoDevice, Command);\r | |
949 | \r | |
950 | //\r | |
951 | // Write back the original value\r | |
952 | //\r | |
953 | PCI_SET_COMMAND_REGISTER (PciIoDevice, *OldCommand);\r | |
954 | \r | |
955 | //\r | |
956 | // Restore TPL to its original level\r | |
957 | //\r | |
958 | gBS->RestoreTPL (OldTpl);\r | |
959 | \r | |
960 | if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {\r | |
961 | \r | |
962 | //\r | |
963 | // Preserve the original value\r | |
964 | //\r | |
965 | PCI_READ_BRIDGE_CONTROL_REGISTER (PciIoDevice, OldBridgeControl);\r | |
966 | \r | |
967 | //\r | |
968 | // Raise TPL to high level to disable timer interrupt while the BAR is probed\r | |
969 | //\r | |
970 | OldTpl = gBS->RaiseTPL (TPL_HIGH_LEVEL);\r | |
971 | \r | |
972 | PCI_SET_BRIDGE_CONTROL_REGISTER (PciIoDevice, *BridgeControl);\r | |
973 | PCI_READ_BRIDGE_CONTROL_REGISTER (PciIoDevice, BridgeControl);\r | |
974 | \r | |
975 | //\r | |
976 | // Write back the original value\r | |
977 | //\r | |
978 | PCI_SET_BRIDGE_CONTROL_REGISTER (PciIoDevice, *OldBridgeControl);\r | |
979 | \r | |
980 | //\r | |
981 | // Restore TPL to its original level\r | |
982 | //\r | |
983 | gBS->RestoreTPL (OldTpl);\r | |
984 | \r | |
985 | } else {\r | |
986 | *OldBridgeControl = 0;\r | |
987 | *BridgeControl = 0;\r | |
988 | }\r | |
989 | }\r | |
990 | \r | |
991 | /**\r | |
992 | Set the supported or current attributes of a PCI device.\r | |
993 | \r | |
994 | @param PciIoDevice Structure pointer for PCI device.\r | |
995 | @param Command Command register value.\r | |
996 | @param BridgeControl Bridge control value for PPB or P2C.\r | |
997 | @param Option Make a choice of EFI_SET_SUPPORTS or EFI_SET_ATTRIBUTES.\r | |
998 | \r | |
999 | **/\r | |
1000 | VOID\r | |
1001 | PciSetDeviceAttribute (\r | |
1002 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
1003 | IN UINT16 Command,\r | |
1004 | IN UINT16 BridgeControl,\r | |
1005 | IN UINTN Option\r | |
1006 | )\r | |
1007 | {\r | |
1008 | UINT64 Attributes;\r | |
1009 | \r | |
1010 | Attributes = 0;\r | |
1011 | \r | |
1012 | if ((Command & EFI_PCI_COMMAND_IO_SPACE) != 0) {\r | |
1013 | Attributes |= EFI_PCI_IO_ATTRIBUTE_IO;\r | |
1014 | }\r | |
1015 | \r | |
1016 | if ((Command & EFI_PCI_COMMAND_MEMORY_SPACE) != 0) {\r | |
1017 | Attributes |= EFI_PCI_IO_ATTRIBUTE_MEMORY;\r | |
1018 | }\r | |
1019 | \r | |
1020 | if ((Command & EFI_PCI_COMMAND_BUS_MASTER) != 0) {\r | |
1021 | Attributes |= EFI_PCI_IO_ATTRIBUTE_BUS_MASTER;\r | |
1022 | }\r | |
1023 | \r | |
1024 | if ((Command & EFI_PCI_COMMAND_VGA_PALETTE_SNOOP) != 0) {\r | |
1025 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;\r | |
1026 | }\r | |
1027 | \r | |
1028 | if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_ISA) != 0) {\r | |
1029 | Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_IO;\r | |
1030 | }\r | |
1031 | \r | |
1032 | if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA) != 0) {\r | |
1033 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO;\r | |
1034 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY;\r | |
1035 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO;\r | |
1036 | }\r | |
1037 | \r | |
1038 | if ((BridgeControl & EFI_PCI_BRIDGE_CONTROL_VGA_16) != 0) {\r | |
1039 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_IO_16;\r | |
1040 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16;\r | |
1041 | }\r | |
1042 | \r | |
1043 | if (Option == EFI_SET_SUPPORTS) {\r | |
1044 | \r | |
6e1e5405 | 1045 | Attributes |= (UINT64) (EFI_PCI_IO_ATTRIBUTE_MEMORY_WRITE_COMBINE |\r |
9060e3ec | 1046 | EFI_PCI_IO_ATTRIBUTE_MEMORY_CACHED |\r |
1047 | EFI_PCI_IO_ATTRIBUTE_MEMORY_DISABLE |\r | |
1048 | EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE |\r | |
1049 | EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM |\r | |
6e1e5405 | 1050 | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE);\r |
9060e3ec | 1051 | \r |
e0ee9d93 | 1052 | if (IS_PCI_LPC (&PciIoDevice->Pci)) {\r |
1053 | Attributes |= EFI_PCI_IO_ATTRIBUTE_ISA_MOTHERBOARD_IO;\r | |
980050bc RN |
1054 | Attributes |= (mReserveIsaAliases ? (UINT64) EFI_PCI_IO_ATTRIBUTE_ISA_IO : \\r |
1055 | (UINT64) EFI_PCI_IO_ATTRIBUTE_ISA_IO_16);\r | |
9060e3ec | 1056 | }\r |
1057 | \r | |
1058 | if (IS_PCI_BRIDGE (&PciIoDevice->Pci) || IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {\r | |
1059 | //\r | |
1060 | // For bridge, it should support IDE attributes\r | |
1061 | //\r | |
1062 | Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO;\r | |
1063 | Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO;\r | |
e0ee9d93 | 1064 | \r |
1065 | if (mReserveVgaAliases) {\r | |
1066 | Attributes &= ~(UINT64)(EFI_PCI_IO_ATTRIBUTE_VGA_IO_16 | \\r | |
1067 | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO_16);\r | |
1068 | } else {\r | |
1069 | Attributes &= ~(UINT64)(EFI_PCI_IO_ATTRIBUTE_VGA_IO | \\r | |
1070 | EFI_PCI_IO_ATTRIBUTE_VGA_PALETTE_IO);\r | |
1071 | }\r | |
9060e3ec | 1072 | } else {\r |
1073 | \r | |
1074 | if (IS_PCI_IDE (&PciIoDevice->Pci)) {\r | |
1075 | Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_SECONDARY_IO;\r | |
1076 | Attributes |= EFI_PCI_IO_ATTRIBUTE_IDE_PRIMARY_IO;\r | |
1077 | }\r | |
1078 | \r | |
1079 | if (IS_PCI_VGA (&PciIoDevice->Pci)) {\r | |
1080 | Attributes |= EFI_PCI_IO_ATTRIBUTE_VGA_MEMORY;\r | |
980050bc RN |
1081 | Attributes |= (mReserveVgaAliases ? (UINT64) EFI_PCI_IO_ATTRIBUTE_VGA_IO : \\r |
1082 | (UINT64) EFI_PCI_IO_ATTRIBUTE_VGA_IO_16);\r | |
9060e3ec | 1083 | }\r |
1084 | }\r | |
1085 | \r | |
1086 | PciIoDevice->Supports = Attributes;\r | |
1087 | PciIoDevice->Supports &= ( (PciIoDevice->Parent->Supports) | \\r | |
1088 | EFI_PCI_IO_ATTRIBUTE_IO | EFI_PCI_IO_ATTRIBUTE_MEMORY | \\r | |
1089 | EFI_PCI_IO_ATTRIBUTE_BUS_MASTER );\r | |
1090 | \r | |
1091 | } else {\r | |
4ed4e19c | 1092 | //\r |
1093 | // When this attribute is clear, the RomImage and RomSize fields in the PCI IO were\r | |
1094 | // initialized based on the PCI option ROM found through the ROM BAR of the PCI controller.\r | |
1095 | // When this attribute is set, the PCI option ROM described by the RomImage and RomSize\r | |
1096 | // fields is not from the the ROM BAR of the PCI controller.\r | |
1097 | //\r | |
1098 | if (!PciIoDevice->EmbeddedRom) {\r | |
1099 | Attributes |= EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM;\r | |
1100 | }\r | |
9060e3ec | 1101 | PciIoDevice->Attributes = Attributes;\r |
1102 | }\r | |
1103 | }\r | |
1104 | \r | |
1105 | /**\r | |
1106 | Determine if the device can support Fast Back to Back attribute.\r | |
1107 | \r | |
1108 | @param PciIoDevice Pci device instance.\r | |
1109 | @param StatusIndex Status register value.\r | |
1110 | \r | |
1111 | @retval EFI_SUCCESS This device support Fast Back to Back attribute.\r | |
1112 | @retval EFI_UNSUPPORTED This device doesn't support Fast Back to Back attribute.\r | |
1113 | \r | |
1114 | **/\r | |
1115 | EFI_STATUS\r | |
1116 | GetFastBackToBackSupport (\r | |
1117 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
1118 | IN UINT8 StatusIndex\r | |
1119 | )\r | |
1120 | {\r | |
1121 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
1122 | EFI_STATUS Status;\r | |
1123 | UINT32 StatusRegister;\r | |
1124 | \r | |
1125 | //\r | |
1126 | // Read the status register\r | |
1127 | //\r | |
1128 | PciIo = &PciIoDevice->PciIo;\r | |
1129 | Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint16, StatusIndex, 1, &StatusRegister);\r | |
1130 | if (EFI_ERROR (Status)) {\r | |
1131 | return EFI_UNSUPPORTED;\r | |
1132 | }\r | |
1133 | \r | |
1134 | //\r | |
1135 | // Check the Fast B2B bit\r | |
1136 | //\r | |
1137 | if ((StatusRegister & EFI_PCI_FAST_BACK_TO_BACK_CAPABLE) != 0) {\r | |
1138 | return EFI_SUCCESS;\r | |
1139 | } else {\r | |
1140 | return EFI_UNSUPPORTED;\r | |
1141 | }\r | |
1142 | }\r | |
1143 | \r | |
1144 | /**\r | |
1145 | Process the option ROM for all the children of the specified parent PCI device.\r | |
1146 | It can only be used after the first full Option ROM process.\r | |
1147 | \r | |
1148 | @param PciIoDevice Pci device instance.\r | |
1149 | \r | |
1150 | **/\r | |
1151 | VOID\r | |
1152 | ProcessOptionRomLight (\r | |
1153 | IN PCI_IO_DEVICE *PciIoDevice\r | |
1154 | )\r | |
1155 | {\r | |
1156 | PCI_IO_DEVICE *Temp;\r | |
1157 | LIST_ENTRY *CurrentLink;\r | |
1158 | \r | |
1159 | //\r | |
1160 | // For RootBridge, PPB , P2C, go recursively to traverse all its children\r | |
1161 | //\r | |
1162 | CurrentLink = PciIoDevice->ChildList.ForwardLink;\r | |
1163 | while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {\r | |
1164 | \r | |
1165 | Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);\r | |
1166 | \r | |
1167 | if (!IsListEmpty (&Temp->ChildList)) {\r | |
1168 | ProcessOptionRomLight (Temp);\r | |
1169 | }\r | |
1170 | \r | |
1171 | PciRomGetImageMapping (Temp);\r | |
1172 | \r | |
1173 | //\r | |
1174 | // The OpRom has already been processed in the first round\r | |
1175 | //\r | |
1176 | Temp->AllOpRomProcessed = TRUE;\r | |
1177 | \r | |
1178 | CurrentLink = CurrentLink->ForwardLink;\r | |
1179 | }\r | |
1180 | }\r | |
1181 | \r | |
1182 | /**\r | |
1183 | Determine the related attributes of all devices under a Root Bridge.\r | |
1184 | \r | |
1185 | @param PciIoDevice PCI device instance.\r | |
1186 | \r | |
1187 | **/\r | |
1188 | EFI_STATUS\r | |
1189 | DetermineDeviceAttribute (\r | |
1190 | IN PCI_IO_DEVICE *PciIoDevice\r | |
1191 | )\r | |
1192 | {\r | |
1193 | UINT16 Command;\r | |
1194 | UINT16 BridgeControl;\r | |
1195 | UINT16 OldCommand;\r | |
1196 | UINT16 OldBridgeControl;\r | |
1197 | BOOLEAN FastB2BSupport;\r | |
1198 | PCI_IO_DEVICE *Temp;\r | |
1199 | LIST_ENTRY *CurrentLink;\r | |
1200 | EFI_STATUS Status;\r | |
1201 | \r | |
1202 | //\r | |
1203 | // For Root Bridge, just copy it by RootBridgeIo proctocol\r | |
1204 | // so as to keep consistent with the actual attribute\r | |
1205 | //\r | |
1206 | if (PciIoDevice->Parent == NULL) {\r | |
1207 | Status = PciIoDevice->PciRootBridgeIo->GetAttributes (\r | |
1208 | PciIoDevice->PciRootBridgeIo,\r | |
1209 | &PciIoDevice->Supports,\r | |
1210 | &PciIoDevice->Attributes\r | |
1211 | );\r | |
1212 | if (EFI_ERROR (Status)) {\r | |
1213 | return Status;\r | |
1214 | }\r | |
5a3a6aa7 | 1215 | //\r |
1216 | // Assume the PCI Root Bridge supports DAC\r | |
1217 | //\r | |
6e1e5405 | 1218 | PciIoDevice->Supports |= (UINT64)(EFI_PCI_IO_ATTRIBUTE_EMBEDDED_DEVICE |\r |
5a3a6aa7 | 1219 | EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM |\r |
1220 | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE);\r | |
7afa5ea8 | 1221 | \r |
9060e3ec | 1222 | } else {\r |
1223 | \r | |
1224 | //\r | |
1225 | // Set the attributes to be checked for common PCI devices and PPB or P2C\r | |
1226 | // Since some devices only support part of them, it is better to set the\r | |
1227 | // attribute according to its command or bridge control register\r | |
1228 | //\r | |
1229 | Command = EFI_PCI_COMMAND_IO_SPACE |\r | |
1230 | EFI_PCI_COMMAND_MEMORY_SPACE |\r | |
1231 | EFI_PCI_COMMAND_BUS_MASTER |\r | |
1232 | EFI_PCI_COMMAND_VGA_PALETTE_SNOOP;\r | |
1233 | \r | |
1234 | BridgeControl = EFI_PCI_BRIDGE_CONTROL_ISA | EFI_PCI_BRIDGE_CONTROL_VGA | EFI_PCI_BRIDGE_CONTROL_VGA_16;\r | |
1235 | \r | |
1236 | //\r | |
1237 | // Test whether the device can support attributes above\r | |
1238 | //\r | |
1239 | PciTestSupportedAttribute (PciIoDevice, &Command, &BridgeControl, &OldCommand, &OldBridgeControl);\r | |
1240 | \r | |
1241 | //\r | |
1242 | // Set the supported attributes for specified PCI device\r | |
1243 | //\r | |
1244 | PciSetDeviceAttribute (PciIoDevice, Command, BridgeControl, EFI_SET_SUPPORTS);\r | |
1245 | \r | |
1246 | //\r | |
1247 | // Set the current attributes for specified PCI device\r | |
1248 | //\r | |
1249 | PciSetDeviceAttribute (PciIoDevice, OldCommand, OldBridgeControl, EFI_SET_ATTRIBUTES);\r | |
1250 | \r | |
1251 | //\r | |
1252 | // Enable other supported attributes but not defined in PCI_IO_PROTOCOL\r | |
1253 | //\r | |
1254 | PCI_ENABLE_COMMAND_REGISTER (PciIoDevice, EFI_PCI_COMMAND_MEMORY_WRITE_AND_INVALIDATE);\r | |
1255 | }\r | |
1256 | \r | |
1257 | FastB2BSupport = TRUE;\r | |
1258 | \r | |
1259 | //\r | |
1260 | // P2C can not support FB2B on the secondary side\r | |
1261 | //\r | |
1262 | if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {\r | |
1263 | FastB2BSupport = FALSE;\r | |
1264 | }\r | |
1265 | \r | |
1266 | //\r | |
1267 | // For RootBridge, PPB , P2C, go recursively to traverse all its children\r | |
1268 | //\r | |
1269 | CurrentLink = PciIoDevice->ChildList.ForwardLink;\r | |
1270 | while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {\r | |
1271 | \r | |
1272 | Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);\r | |
1273 | Status = DetermineDeviceAttribute (Temp);\r | |
1274 | if (EFI_ERROR (Status)) {\r | |
1275 | return Status;\r | |
1276 | }\r | |
1277 | //\r | |
1278 | // Detect Fast Bact to Bact support for the device under the bridge\r | |
1279 | //\r | |
1280 | Status = GetFastBackToBackSupport (Temp, PCI_PRIMARY_STATUS_OFFSET);\r | |
1281 | if (FastB2BSupport && EFI_ERROR (Status)) {\r | |
1282 | FastB2BSupport = FALSE;\r | |
1283 | }\r | |
1284 | \r | |
1285 | CurrentLink = CurrentLink->ForwardLink;\r | |
1286 | }\r | |
1287 | //\r | |
1288 | // Set or clear Fast Back to Back bit for the whole bridge\r | |
1289 | //\r | |
1290 | if (!IsListEmpty (&PciIoDevice->ChildList)) {\r | |
1291 | \r | |
1292 | if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {\r | |
1293 | \r | |
1294 | Status = GetFastBackToBackSupport (PciIoDevice, PCI_BRIDGE_STATUS_REGISTER_OFFSET);\r | |
1295 | \r | |
1296 | if (EFI_ERROR (Status) || (!FastB2BSupport)) {\r | |
1297 | FastB2BSupport = FALSE;\r | |
1298 | PCI_DISABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK);\r | |
1299 | } else {\r | |
1300 | PCI_ENABLE_BRIDGE_CONTROL_REGISTER (PciIoDevice, EFI_PCI_BRIDGE_CONTROL_FAST_BACK_TO_BACK);\r | |
1301 | }\r | |
1302 | }\r | |
1303 | \r | |
1304 | CurrentLink = PciIoDevice->ChildList.ForwardLink;\r | |
1305 | while (CurrentLink != NULL && CurrentLink != &PciIoDevice->ChildList) {\r | |
1306 | Temp = PCI_IO_DEVICE_FROM_LINK (CurrentLink);\r | |
1307 | if (FastB2BSupport) {\r | |
1308 | PCI_ENABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK);\r | |
1309 | } else {\r | |
1310 | PCI_DISABLE_COMMAND_REGISTER (Temp, EFI_PCI_COMMAND_FAST_BACK_TO_BACK);\r | |
1311 | }\r | |
1312 | \r | |
1313 | CurrentLink = CurrentLink->ForwardLink;\r | |
1314 | }\r | |
1315 | }\r | |
1316 | //\r | |
1317 | // End for IsListEmpty\r | |
1318 | //\r | |
1319 | return EFI_SUCCESS;\r | |
1320 | }\r | |
1321 | \r | |
1322 | /**\r | |
1323 | This routine is used to update the bar information for those incompatible PCI device.\r | |
1324 | \r | |
1325 | @param PciIoDevice Input Pci device instance. Output Pci device instance with updated\r | |
1326 | Bar information.\r | |
1327 | \r | |
1328 | @retval EFI_SUCCESS Successfully updated bar information.\r | |
1329 | @retval EFI_UNSUPPORTED Given PCI device doesn't belong to incompatible PCI device list.\r | |
1330 | \r | |
1331 | **/\r | |
1332 | EFI_STATUS\r | |
1333 | UpdatePciInfo (\r | |
1334 | IN OUT PCI_IO_DEVICE *PciIoDevice\r | |
1335 | )\r | |
1336 | {\r | |
1337 | EFI_STATUS Status;\r | |
1338 | UINTN BarIndex;\r | |
1339 | UINTN BarEndIndex;\r | |
1340 | BOOLEAN SetFlag;\r | |
1341 | VOID *Configuration;\r | |
1342 | EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr;\r | |
1343 | \r | |
1344 | Configuration = NULL;\r | |
1345 | Status = EFI_SUCCESS;\r | |
1346 | \r | |
ea669c1b | 1347 | if (gIncompatiblePciDeviceSupport == NULL) {\r |
9060e3ec | 1348 | //\r |
1349 | // It can only be supported after the Incompatible PCI Device\r | |
1350 | // Support Protocol has been installed\r | |
1351 | //\r | |
1352 | Status = gBS->LocateProtocol (\r | |
1353 | &gEfiIncompatiblePciDeviceSupportProtocolGuid,\r | |
1354 | NULL,\r | |
ea669c1b | 1355 | (VOID **) &gIncompatiblePciDeviceSupport\r |
9060e3ec | 1356 | );\r |
1357 | }\r | |
1358 | if (Status == EFI_SUCCESS) {\r | |
1359 | //\r | |
1360 | // Check whether the device belongs to incompatible devices from protocol or not\r | |
1361 | // If it is , then get its special requirement in the ACPI table\r | |
1362 | //\r | |
ea669c1b RN |
1363 | Status = gIncompatiblePciDeviceSupport->CheckDevice (\r |
1364 | gIncompatiblePciDeviceSupport,\r | |
1365 | PciIoDevice->Pci.Hdr.VendorId,\r | |
1366 | PciIoDevice->Pci.Hdr.DeviceId,\r | |
1367 | PciIoDevice->Pci.Hdr.RevisionID,\r | |
1368 | PciIoDevice->Pci.Device.SubsystemVendorID,\r | |
1369 | PciIoDevice->Pci.Device.SubsystemID,\r | |
1370 | &Configuration\r | |
1371 | );\r | |
9060e3ec | 1372 | \r |
1373 | }\r | |
1374 | \r | |
1375 | if (EFI_ERROR (Status) || Configuration == NULL ) {\r | |
1376 | return EFI_UNSUPPORTED;\r | |
1377 | }\r | |
1378 | \r | |
1379 | //\r | |
1380 | // Update PCI device information from the ACPI table\r | |
1381 | //\r | |
1382 | Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Configuration;\r | |
1383 | \r | |
1384 | while (Ptr->Desc != ACPI_END_TAG_DESCRIPTOR) {\r | |
1385 | \r | |
1386 | if (Ptr->Desc != ACPI_ADDRESS_SPACE_DESCRIPTOR) {\r | |
1387 | //\r | |
1388 | // The format is not support\r | |
1389 | //\r | |
1390 | break;\r | |
1391 | }\r | |
1392 | \r | |
1393 | BarIndex = (UINTN) Ptr->AddrTranslationOffset;\r | |
1394 | BarEndIndex = BarIndex;\r | |
1395 | \r | |
1396 | //\r | |
1397 | // Update all the bars in the device\r | |
1398 | //\r | |
1399 | if (BarIndex == PCI_BAR_ALL) {\r | |
1400 | BarIndex = 0;\r | |
1401 | BarEndIndex = PCI_MAX_BAR - 1;\r | |
1402 | }\r | |
1403 | \r | |
1404 | if (BarIndex > PCI_MAX_BAR) {\r | |
1405 | Ptr++;\r | |
1406 | continue;\r | |
1407 | }\r | |
1408 | \r | |
1409 | for (; BarIndex <= BarEndIndex; BarIndex++) {\r | |
1410 | SetFlag = FALSE;\r | |
1411 | switch (Ptr->ResType) {\r | |
1412 | case ACPI_ADDRESS_SPACE_TYPE_MEM:\r | |
1413 | \r | |
1414 | //\r | |
1415 | // Make sure the bar is memory type\r | |
1416 | //\r | |
1417 | if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeMem)) {\r | |
1418 | SetFlag = TRUE;\r | |
05070c1b RN |
1419 | \r |
1420 | //\r | |
1421 | // Ignored if granularity is 0.\r | |
1422 | // Ignored if PCI BAR is I/O or 32-bit memory.\r | |
1423 | // If PCI BAR is 64-bit memory and granularity is 32, then\r | |
1424 | // the PCI BAR resource is allocated below 4GB.\r | |
1425 | // If PCI BAR is 64-bit memory and granularity is 64, then\r | |
1426 | // the PCI BAR resource is allocated above 4GB.\r | |
1427 | //\r | |
1428 | if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypeMem64) {\r | |
1429 | switch (Ptr->AddrSpaceGranularity) {\r | |
1430 | case 32:\r | |
1431 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32;\r | |
1432 | case 64:\r | |
1433 | PciIoDevice->PciBar[BarIndex].BarTypeFixed = TRUE;\r | |
1434 | break;\r | |
1435 | default:\r | |
1436 | break;\r | |
1437 | }\r | |
1438 | }\r | |
1439 | \r | |
1440 | if (PciIoDevice->PciBar[BarIndex].BarType == PciBarTypePMem64) {\r | |
1441 | switch (Ptr->AddrSpaceGranularity) {\r | |
1442 | case 32:\r | |
1443 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32;\r | |
1444 | case 64:\r | |
1445 | PciIoDevice->PciBar[BarIndex].BarTypeFixed = TRUE;\r | |
1446 | break;\r | |
1447 | default:\r | |
1448 | break;\r | |
1449 | }\r | |
1450 | }\r | |
9060e3ec | 1451 | }\r |
1452 | break;\r | |
1453 | \r | |
1454 | case ACPI_ADDRESS_SPACE_TYPE_IO:\r | |
1455 | \r | |
1456 | //\r | |
1457 | // Make sure the bar is IO type\r | |
1458 | //\r | |
1459 | if (CheckBarType (PciIoDevice, (UINT8) BarIndex, PciBarTypeIo)) {\r | |
1460 | SetFlag = TRUE;\r | |
1461 | }\r | |
1462 | break;\r | |
1463 | }\r | |
1464 | \r | |
1465 | if (SetFlag) {\r | |
1466 | \r | |
1467 | //\r | |
1468 | // Update the new alignment for the device\r | |
1469 | //\r | |
1470 | SetNewAlign (&(PciIoDevice->PciBar[BarIndex].Alignment), Ptr->AddrRangeMax);\r | |
1471 | \r | |
1472 | //\r | |
1473 | // Update the new length for the device\r | |
1474 | //\r | |
1475 | if (Ptr->AddrLen != PCI_BAR_NOCHANGE) {\r | |
1476 | PciIoDevice->PciBar[BarIndex].Length = Ptr->AddrLen;\r | |
1477 | }\r | |
1478 | }\r | |
1479 | }\r | |
1480 | \r | |
1481 | Ptr++;\r | |
1482 | }\r | |
1483 | \r | |
1484 | FreePool (Configuration);\r | |
1485 | \r | |
1486 | return EFI_SUCCESS;\r | |
1487 | }\r | |
1488 | \r | |
1489 | /**\r | |
1490 | This routine will update the alignment with the new alignment.\r | |
1491 | \r | |
1492 | @param Alignment Input Old alignment. Output updated alignment.\r | |
1493 | @param NewAlignment New alignment.\r | |
1494 | \r | |
1495 | **/\r | |
1496 | VOID\r | |
1497 | SetNewAlign (\r | |
1498 | IN OUT UINT64 *Alignment,\r | |
1499 | IN UINT64 NewAlignment\r | |
1500 | )\r | |
1501 | {\r | |
1502 | UINT64 OldAlignment;\r | |
1503 | UINTN ShiftBit;\r | |
1504 | \r | |
1505 | //\r | |
1506 | // The new alignment is the same as the original,\r | |
1507 | // so skip it\r | |
1508 | //\r | |
1509 | if (NewAlignment == PCI_BAR_OLD_ALIGN) {\r | |
1510 | return ;\r | |
1511 | }\r | |
1512 | //\r | |
1513 | // Check the validity of the parameter\r | |
1514 | //\r | |
1515 | if (NewAlignment != PCI_BAR_EVEN_ALIGN &&\r | |
1516 | NewAlignment != PCI_BAR_SQUAD_ALIGN &&\r | |
1517 | NewAlignment != PCI_BAR_DQUAD_ALIGN ) {\r | |
1518 | *Alignment = NewAlignment;\r | |
1519 | return ;\r | |
1520 | }\r | |
1521 | \r | |
1522 | OldAlignment = (*Alignment) + 1;\r | |
1523 | ShiftBit = 0;\r | |
1524 | \r | |
1525 | //\r | |
1526 | // Get the first non-zero hex value of the length\r | |
1527 | //\r | |
1528 | while ((OldAlignment & 0x0F) == 0x00) {\r | |
1529 | OldAlignment = RShiftU64 (OldAlignment, 4);\r | |
1530 | ShiftBit += 4;\r | |
1531 | }\r | |
1532 | \r | |
1533 | //\r | |
1534 | // Adjust the alignment to even, quad or double quad boundary\r | |
1535 | //\r | |
1536 | if (NewAlignment == PCI_BAR_EVEN_ALIGN) {\r | |
1537 | if ((OldAlignment & 0x01) != 0) {\r | |
1538 | OldAlignment = OldAlignment + 2 - (OldAlignment & 0x01);\r | |
1539 | }\r | |
1540 | } else if (NewAlignment == PCI_BAR_SQUAD_ALIGN) {\r | |
1541 | if ((OldAlignment & 0x03) != 0) {\r | |
1542 | OldAlignment = OldAlignment + 4 - (OldAlignment & 0x03);\r | |
1543 | }\r | |
1544 | } else if (NewAlignment == PCI_BAR_DQUAD_ALIGN) {\r | |
1545 | if ((OldAlignment & 0x07) != 0) {\r | |
1546 | OldAlignment = OldAlignment + 8 - (OldAlignment & 0x07);\r | |
1547 | }\r | |
1548 | }\r | |
1549 | \r | |
1550 | //\r | |
1551 | // Update the old value\r | |
1552 | //\r | |
1553 | NewAlignment = LShiftU64 (OldAlignment, ShiftBit) - 1;\r | |
1554 | *Alignment = NewAlignment;\r | |
1555 | \r | |
1556 | return ;\r | |
1557 | }\r | |
1558 | \r | |
1559 | /**\r | |
1560 | Parse PCI IOV VF bar information and fill them into PCI device instance.\r | |
1561 | \r | |
1562 | @param PciIoDevice Pci device instance.\r | |
1563 | @param Offset Bar offset.\r | |
1564 | @param BarIndex Bar index.\r | |
1565 | \r | |
1566 | @return Next bar offset.\r | |
1567 | \r | |
1568 | **/\r | |
1569 | UINTN\r | |
1570 | PciIovParseVfBar (\r | |
1571 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
1572 | IN UINTN Offset,\r | |
1573 | IN UINTN BarIndex\r | |
1574 | )\r | |
1575 | {\r | |
1576 | UINT32 Value;\r | |
1577 | UINT32 OriginalValue;\r | |
1578 | UINT32 Mask;\r | |
9060e3ec | 1579 | EFI_STATUS Status;\r |
1580 | \r | |
1581 | //\r | |
1582 | // Ensure it is called properly\r | |
1583 | //\r | |
1584 | ASSERT (PciIoDevice->SrIovCapabilityOffset != 0);\r | |
1585 | if (PciIoDevice->SrIovCapabilityOffset == 0) {\r | |
1586 | return 0;\r | |
1587 | }\r | |
1588 | \r | |
1589 | OriginalValue = 0;\r | |
1590 | Value = 0;\r | |
1591 | \r | |
1592 | Status = VfBarExisted (\r | |
1593 | PciIoDevice,\r | |
1594 | Offset,\r | |
1595 | &Value,\r | |
1596 | &OriginalValue\r | |
1597 | );\r | |
1598 | \r | |
1599 | if (EFI_ERROR (Status)) {\r | |
1600 | PciIoDevice->VfPciBar[BarIndex].BaseAddress = 0;\r | |
1601 | PciIoDevice->VfPciBar[BarIndex].Length = 0;\r | |
1602 | PciIoDevice->VfPciBar[BarIndex].Alignment = 0;\r | |
1603 | \r | |
1604 | //\r | |
1605 | // Scan all the BARs anyway\r | |
1606 | //\r | |
d4048391 | 1607 | PciIoDevice->VfPciBar[BarIndex].Offset = (UINT16) Offset;\r |
9060e3ec | 1608 | return Offset + 4;\r |
1609 | }\r | |
1610 | \r | |
d4048391 | 1611 | PciIoDevice->VfPciBar[BarIndex].Offset = (UINT16) Offset;\r |
aa75dfec | 1612 | if ((Value & 0x01) != 0) {\r |
9060e3ec | 1613 | //\r |
1614 | // Device I/Os. Impossible\r | |
1615 | //\r | |
1616 | ASSERT (FALSE);\r | |
1617 | return Offset + 4;\r | |
1618 | \r | |
1619 | } else {\r | |
1620 | \r | |
1621 | Mask = 0xfffffff0;\r | |
1622 | \r | |
1623 | PciIoDevice->VfPciBar[BarIndex].BaseAddress = OriginalValue & Mask;\r | |
1624 | \r | |
1625 | switch (Value & 0x07) {\r | |
1626 | \r | |
1627 | //\r | |
1628 | //memory space; anywhere in 32 bit address space\r | |
1629 | //\r | |
1630 | case 0x00:\r | |
aa75dfec | 1631 | if ((Value & 0x08) != 0) {\r |
9060e3ec | 1632 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypePMem32;\r |
1633 | } else {\r | |
1634 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeMem32;\r | |
1635 | }\r | |
1636 | \r | |
1637 | PciIoDevice->VfPciBar[BarIndex].Length = (~(Value & Mask)) + 1;\r | |
1638 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;\r | |
1639 | \r | |
1640 | //\r | |
1641 | // Adjust Length\r | |
1642 | //\r | |
1643 | PciIoDevice->VfPciBar[BarIndex].Length = MultU64x32 (PciIoDevice->VfPciBar[BarIndex].Length, PciIoDevice->InitialVFs);\r | |
1644 | //\r | |
1645 | // Adjust Alignment\r | |
1646 | //\r | |
1647 | if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {\r | |
1648 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;\r | |
1649 | }\r | |
1650 | \r | |
1651 | break;\r | |
1652 | \r | |
1653 | //\r | |
1654 | // memory space; anywhere in 64 bit address space\r | |
1655 | //\r | |
1656 | case 0x04:\r | |
aa75dfec | 1657 | if ((Value & 0x08) != 0) {\r |
9060e3ec | 1658 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypePMem64;\r |
1659 | } else {\r | |
1660 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeMem64;\r | |
1661 | }\r | |
1662 | \r | |
1663 | //\r | |
1664 | // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar\r | |
1665 | // is regarded as an extension for the first bar. As a result\r | |
1666 | // the sizing will be conducted on combined 64 bit value\r | |
1667 | // Here just store the masked first 32bit value for future size\r | |
1668 | // calculation\r | |
1669 | //\r | |
1670 | PciIoDevice->VfPciBar[BarIndex].Length = Value & Mask;\r | |
1671 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;\r | |
1672 | \r | |
1673 | if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {\r | |
1674 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;\r | |
1675 | }\r | |
1676 | \r | |
1677 | //\r | |
1678 | // Increment the offset to point to next DWORD\r | |
1679 | //\r | |
1680 | Offset += 4;\r | |
1681 | \r | |
1682 | Status = VfBarExisted (\r | |
1683 | PciIoDevice,\r | |
1684 | Offset,\r | |
1685 | &Value,\r | |
1686 | &OriginalValue\r | |
1687 | );\r | |
1688 | \r | |
1689 | if (EFI_ERROR (Status)) {\r | |
1690 | return Offset + 4;\r | |
1691 | }\r | |
1692 | \r | |
1693 | //\r | |
1694 | // Fix the length to support some spefic 64 bit BAR\r | |
1695 | //\r | |
c0394e04 | 1696 | Value |= ((UINT32) -1 << HighBitSet32 (Value));\r |
9060e3ec | 1697 | \r |
1698 | //\r | |
1699 | // Calculate the size of 64bit bar\r | |
1700 | //\r | |
1701 | PciIoDevice->VfPciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32);\r | |
1702 | \r | |
1703 | PciIoDevice->VfPciBar[BarIndex].Length = PciIoDevice->VfPciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32);\r | |
1704 | PciIoDevice->VfPciBar[BarIndex].Length = (~(PciIoDevice->VfPciBar[BarIndex].Length)) + 1;\r | |
1705 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;\r | |
1706 | \r | |
1707 | //\r | |
1708 | // Adjust Length\r | |
1709 | //\r | |
1710 | PciIoDevice->VfPciBar[BarIndex].Length = MultU64x32 (PciIoDevice->VfPciBar[BarIndex].Length, PciIoDevice->InitialVFs);\r | |
1711 | //\r | |
1712 | // Adjust Alignment\r | |
1713 | //\r | |
1714 | if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {\r | |
1715 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;\r | |
1716 | }\r | |
1717 | \r | |
1718 | break;\r | |
1719 | \r | |
1720 | //\r | |
1721 | // reserved\r | |
1722 | //\r | |
1723 | default:\r | |
1724 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeUnknown;\r | |
1725 | PciIoDevice->VfPciBar[BarIndex].Length = (~(Value & Mask)) + 1;\r | |
1726 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->VfPciBar[BarIndex].Length - 1;\r | |
1727 | \r | |
1728 | if (PciIoDevice->VfPciBar[BarIndex].Alignment < PciIoDevice->SystemPageSize - 1) {\r | |
1729 | PciIoDevice->VfPciBar[BarIndex].Alignment = PciIoDevice->SystemPageSize - 1;\r | |
1730 | }\r | |
1731 | \r | |
1732 | break;\r | |
1733 | }\r | |
1734 | }\r | |
1735 | \r | |
1736 | //\r | |
1737 | // Check the length again so as to keep compatible with some special bars\r | |
1738 | //\r | |
1739 | if (PciIoDevice->VfPciBar[BarIndex].Length == 0) {\r | |
1740 | PciIoDevice->VfPciBar[BarIndex].BarType = PciBarTypeUnknown;\r | |
1741 | PciIoDevice->VfPciBar[BarIndex].BaseAddress = 0;\r | |
1742 | PciIoDevice->VfPciBar[BarIndex].Alignment = 0;\r | |
1743 | }\r | |
1744 | \r | |
1745 | //\r | |
1746 | // Increment number of bar\r | |
1747 | //\r | |
1748 | return Offset + 4;\r | |
1749 | }\r | |
1750 | \r | |
1751 | /**\r | |
1752 | Parse PCI bar information and fill them into PCI device instance.\r | |
1753 | \r | |
1754 | @param PciIoDevice Pci device instance.\r | |
1755 | @param Offset Bar offset.\r | |
1756 | @param BarIndex Bar index.\r | |
1757 | \r | |
1758 | @return Next bar offset.\r | |
1759 | \r | |
1760 | **/\r | |
1761 | UINTN\r | |
1762 | PciParseBar (\r | |
1763 | IN PCI_IO_DEVICE *PciIoDevice,\r | |
1764 | IN UINTN Offset,\r | |
1765 | IN UINTN BarIndex\r | |
1766 | )\r | |
1767 | {\r | |
1768 | UINT32 Value;\r | |
1769 | UINT32 OriginalValue;\r | |
1770 | UINT32 Mask;\r | |
9060e3ec | 1771 | EFI_STATUS Status;\r |
1772 | \r | |
1773 | OriginalValue = 0;\r | |
1774 | Value = 0;\r | |
1775 | \r | |
1776 | Status = BarExisted (\r | |
1777 | PciIoDevice,\r | |
1778 | Offset,\r | |
1779 | &Value,\r | |
1780 | &OriginalValue\r | |
1781 | );\r | |
1782 | \r | |
1783 | if (EFI_ERROR (Status)) {\r | |
1784 | PciIoDevice->PciBar[BarIndex].BaseAddress = 0;\r | |
1785 | PciIoDevice->PciBar[BarIndex].Length = 0;\r | |
1786 | PciIoDevice->PciBar[BarIndex].Alignment = 0;\r | |
1787 | \r | |
1788 | //\r | |
1789 | // Some devices don't fully comply to PCI spec 2.2. So be to scan all the BARs anyway\r | |
1790 | //\r | |
1791 | PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;\r | |
1792 | return Offset + 4;\r | |
1793 | }\r | |
1794 | \r | |
05070c1b | 1795 | PciIoDevice->PciBar[BarIndex].BarTypeFixed = FALSE;\r |
9060e3ec | 1796 | PciIoDevice->PciBar[BarIndex].Offset = (UINT8) Offset;\r |
1797 | if ((Value & 0x01) != 0) {\r | |
1798 | //\r | |
1799 | // Device I/Os\r | |
1800 | //\r | |
1801 | Mask = 0xfffffffc;\r | |
1802 | \r | |
1803 | if ((Value & 0xFFFF0000) != 0) {\r | |
1804 | //\r | |
1805 | // It is a IO32 bar\r | |
1806 | //\r | |
1807 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo32;\r | |
1808 | PciIoDevice->PciBar[BarIndex].Length = ((~(Value & Mask)) + 1);\r | |
1809 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1810 | \r | |
1811 | } else {\r | |
1812 | //\r | |
1813 | // It is a IO16 bar\r | |
1814 | //\r | |
1815 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeIo16;\r | |
1816 | PciIoDevice->PciBar[BarIndex].Length = 0x0000FFFF & ((~(Value & Mask)) + 1);\r | |
1817 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1818 | \r | |
1819 | }\r | |
1820 | //\r | |
1821 | // Workaround. Some platforms inplement IO bar with 0 length\r | |
1822 | // Need to treat it as no-bar\r | |
1823 | //\r | |
1824 | if (PciIoDevice->PciBar[BarIndex].Length == 0) {\r | |
1825 | PciIoDevice->PciBar[BarIndex].BarType = (PCI_BAR_TYPE) 0;\r | |
1826 | }\r | |
1827 | \r | |
9060e3ec | 1828 | PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask;\r |
1829 | \r | |
1830 | } else {\r | |
1831 | \r | |
1832 | Mask = 0xfffffff0;\r | |
1833 | \r | |
1834 | PciIoDevice->PciBar[BarIndex].BaseAddress = OriginalValue & Mask;\r | |
1835 | \r | |
1836 | switch (Value & 0x07) {\r | |
1837 | \r | |
1838 | //\r | |
1839 | //memory space; anywhere in 32 bit address space\r | |
1840 | //\r | |
1841 | case 0x00:\r | |
1842 | if ((Value & 0x08) != 0) {\r | |
1843 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem32;\r | |
1844 | } else {\r | |
1845 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem32;\r | |
1846 | }\r | |
1847 | \r | |
1848 | PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1;\r | |
1849 | if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {\r | |
1850 | //\r | |
1851 | // Force minimum 4KByte alignment for Virtualization technology for Directed I/O\r | |
1852 | //\r | |
1853 | PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);\r | |
1854 | } else {\r | |
1855 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1856 | }\r | |
1857 | break;\r | |
1858 | \r | |
1859 | //\r | |
1860 | // memory space; anywhere in 64 bit address space\r | |
1861 | //\r | |
1862 | case 0x04:\r | |
1863 | if ((Value & 0x08) != 0) {\r | |
1864 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypePMem64;\r | |
1865 | } else {\r | |
1866 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeMem64;\r | |
1867 | }\r | |
1868 | \r | |
1869 | //\r | |
1870 | // According to PCI 2.2,if the bar indicates a memory 64 decoding, next bar\r | |
1871 | // is regarded as an extension for the first bar. As a result\r | |
1872 | // the sizing will be conducted on combined 64 bit value\r | |
1873 | // Here just store the masked first 32bit value for future size\r | |
1874 | // calculation\r | |
1875 | //\r | |
1876 | PciIoDevice->PciBar[BarIndex].Length = Value & Mask;\r | |
1877 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1878 | \r | |
1879 | //\r | |
1880 | // Increment the offset to point to next DWORD\r | |
1881 | //\r | |
1882 | Offset += 4;\r | |
1883 | \r | |
1884 | Status = BarExisted (\r | |
1885 | PciIoDevice,\r | |
1886 | Offset,\r | |
1887 | &Value,\r | |
1888 | &OriginalValue\r | |
1889 | );\r | |
1890 | \r | |
1891 | if (EFI_ERROR (Status)) {\r | |
1892 | //\r | |
1893 | // the high 32 bit does not claim any BAR, we need to re-check the low 32 bit BAR again\r | |
1894 | //\r | |
1895 | if (PciIoDevice->PciBar[BarIndex].Length == 0) {\r | |
1896 | //\r | |
1897 | // some device implement MMIO bar with 0 length, need to treat it as no-bar\r | |
1898 | //\r | |
1899 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;\r | |
5c13180c | 1900 | return Offset + 4;\r |
9060e3ec | 1901 | }\r |
9060e3ec | 1902 | }\r |
1903 | \r | |
1904 | //\r | |
1905 | // Fix the length to support some spefic 64 bit BAR\r | |
1906 | //\r | |
5c13180c RN |
1907 | if (Value == 0) {\r |
1908 | DEBUG ((EFI_D_INFO, "[PciBus]BAR probing for upper 32bit of MEM64 BAR returns 0, change to 0xFFFFFFFF.\n"));\r | |
1909 | Value = (UINT32) -1;\r | |
1910 | } else {\r | |
1911 | Value |= ((UINT32)(-1) << HighBitSet32 (Value));\r | |
1912 | }\r | |
9060e3ec | 1913 | \r |
1914 | //\r | |
1915 | // Calculate the size of 64bit bar\r | |
1916 | //\r | |
1917 | PciIoDevice->PciBar[BarIndex].BaseAddress |= LShiftU64 ((UINT64) OriginalValue, 32);\r | |
1918 | \r | |
1919 | PciIoDevice->PciBar[BarIndex].Length = PciIoDevice->PciBar[BarIndex].Length | LShiftU64 ((UINT64) Value, 32);\r | |
1920 | PciIoDevice->PciBar[BarIndex].Length = (~(PciIoDevice->PciBar[BarIndex].Length)) + 1;\r | |
1921 | if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {\r | |
1922 | //\r | |
1923 | // Force minimum 4KByte alignment for Virtualization technology for Directed I/O\r | |
1924 | //\r | |
1925 | PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);\r | |
1926 | } else {\r | |
1927 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1928 | }\r | |
1929 | \r | |
1930 | break;\r | |
1931 | \r | |
1932 | //\r | |
1933 | // reserved\r | |
1934 | //\r | |
1935 | default:\r | |
1936 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;\r | |
1937 | PciIoDevice->PciBar[BarIndex].Length = (~(Value & Mask)) + 1;\r | |
1938 | if (PciIoDevice->PciBar[BarIndex].Length < (SIZE_4KB)) {\r | |
1939 | //\r | |
1940 | // Force minimum 4KByte alignment for Virtualization technology for Directed I/O\r | |
1941 | //\r | |
1942 | PciIoDevice->PciBar[BarIndex].Alignment = (SIZE_4KB - 1);\r | |
1943 | } else {\r | |
1944 | PciIoDevice->PciBar[BarIndex].Alignment = PciIoDevice->PciBar[BarIndex].Length - 1;\r | |
1945 | }\r | |
1946 | break;\r | |
1947 | }\r | |
1948 | }\r | |
1949 | \r | |
1950 | //\r | |
1951 | // Check the length again so as to keep compatible with some special bars\r | |
1952 | //\r | |
1953 | if (PciIoDevice->PciBar[BarIndex].Length == 0) {\r | |
1954 | PciIoDevice->PciBar[BarIndex].BarType = PciBarTypeUnknown;\r | |
1955 | PciIoDevice->PciBar[BarIndex].BaseAddress = 0;\r | |
1956 | PciIoDevice->PciBar[BarIndex].Alignment = 0;\r | |
1957 | }\r | |
1958 | \r | |
1959 | //\r | |
1960 | // Increment number of bar\r | |
1961 | //\r | |
1962 | return Offset + 4;\r | |
1963 | }\r | |
1964 | \r | |
1965 | /**\r | |
1966 | This routine is used to initialize the bar of a PCI device.\r | |
1967 | \r | |
1968 | @param PciIoDevice Pci device instance.\r | |
1969 | \r | |
1970 | @note It can be called typically when a device is going to be rejected.\r | |
1971 | \r | |
1972 | **/\r | |
1973 | VOID\r | |
1974 | InitializePciDevice (\r | |
1975 | IN PCI_IO_DEVICE *PciIoDevice\r | |
1976 | )\r | |
1977 | {\r | |
1978 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
1979 | UINT8 Offset;\r | |
1980 | \r | |
1981 | PciIo = &(PciIoDevice->PciIo);\r | |
1982 | \r | |
1983 | //\r | |
1984 | // Put all the resource apertures\r | |
1985 | // Resource base is set to all ones so as to indicate its resource\r | |
1986 | // has not been alloacted\r | |
1987 | //\r | |
1988 | for (Offset = 0x10; Offset <= 0x24; Offset += sizeof (UINT32)) {\r | |
1989 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, Offset, 1, &gAllOne);\r | |
1990 | }\r | |
1991 | }\r | |
1992 | \r | |
1993 | /**\r | |
1994 | This routine is used to initialize the bar of a PCI-PCI Bridge device.\r | |
1995 | \r | |
1996 | @param PciIoDevice PCI-PCI bridge device instance.\r | |
1997 | \r | |
1998 | **/\r | |
1999 | VOID\r | |
2000 | InitializePpb (\r | |
2001 | IN PCI_IO_DEVICE *PciIoDevice\r | |
2002 | )\r | |
2003 | {\r | |
2004 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
2005 | \r | |
2006 | PciIo = &(PciIoDevice->PciIo);\r | |
2007 | \r | |
2008 | //\r | |
2009 | // Put all the resource apertures including IO16\r | |
2010 | // Io32, pMem32, pMem64 to quiescent state\r | |
2011 | // Resource base all ones, Resource limit all zeros\r | |
2012 | //\r | |
2013 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1C, 1, &gAllOne);\r | |
2014 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x1D, 1, &gAllZero);\r | |
2015 | \r | |
2016 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x20, 1, &gAllOne);\r | |
2017 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x22, 1, &gAllZero);\r | |
2018 | \r | |
2019 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x24, 1, &gAllOne);\r | |
2020 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x26, 1, &gAllZero);\r | |
2021 | \r | |
2022 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllOne);\r | |
2023 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2C, 1, &gAllZero);\r | |
2024 | \r | |
2025 | //\r | |
2026 | // Don't support use io32 as for now\r | |
2027 | //\r | |
2028 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x30, 1, &gAllOne);\r | |
2029 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint16, 0x32, 1, &gAllZero);\r | |
2030 | \r | |
2031 | //\r | |
2032 | // Force Interrupt line to zero for cards that come up randomly\r | |
2033 | //\r | |
2034 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero);\r | |
2035 | }\r | |
2036 | \r | |
2037 | /**\r | |
2038 | This routine is used to initialize the bar of a PCI Card Bridge device.\r | |
2039 | \r | |
2040 | @param PciIoDevice PCI Card bridge device.\r | |
2041 | \r | |
2042 | **/\r | |
2043 | VOID\r | |
2044 | InitializeP2C (\r | |
2045 | IN PCI_IO_DEVICE *PciIoDevice\r | |
2046 | )\r | |
2047 | {\r | |
2048 | EFI_PCI_IO_PROTOCOL *PciIo;\r | |
2049 | \r | |
2050 | PciIo = &(PciIoDevice->PciIo);\r | |
2051 | \r | |
2052 | //\r | |
2053 | // Put all the resource apertures including IO16\r | |
2054 | // Io32, pMem32, pMem64 to quiescent state(\r | |
2055 | // Resource base all ones, Resource limit all zeros\r | |
2056 | //\r | |
2057 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x1c, 1, &gAllOne);\r | |
2058 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x20, 1, &gAllZero);\r | |
2059 | \r | |
2060 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x24, 1, &gAllOne);\r | |
2061 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x28, 1, &gAllZero);\r | |
2062 | \r | |
2063 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x2c, 1, &gAllOne);\r | |
2064 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x30, 1, &gAllZero);\r | |
2065 | \r | |
2066 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x34, 1, &gAllOne);\r | |
2067 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint32, 0x38, 1, &gAllZero);\r | |
2068 | \r | |
2069 | //\r | |
2070 | // Force Interrupt line to zero for cards that come up randomly\r | |
2071 | //\r | |
2072 | PciIo->Pci.Write (PciIo, EfiPciIoWidthUint8, 0x3C, 1, &gAllZero);\r | |
2073 | }\r | |
2074 | \r | |
2075 | /**\r | |
2076 | Create and initiliaze general PCI I/O device instance for\r | |
2077 | PCI device/bridge device/hotplug bridge device.\r | |
2078 | \r | |
2079 | @param PciRootBridgeIo Pointer to instance of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.\r | |
2080 | @param Pci Input Pci information block.\r | |
2081 | @param Bus Device Bus NO.\r | |
2082 | @param Device Device device NO.\r | |
2083 | @param Func Device func NO.\r | |
2084 | \r | |
2085 | @return Instance of PCI device. NULL means no instance created.\r | |
2086 | \r | |
2087 | **/\r | |
2088 | PCI_IO_DEVICE *\r | |
2089 | CreatePciIoDevice (\r | |
d4048391 | 2090 | IN PCI_IO_DEVICE *Bridge,\r |
9060e3ec | 2091 | IN PCI_TYPE00 *Pci,\r |
2092 | IN UINT8 Bus,\r | |
2093 | IN UINT8 Device,\r | |
2094 | IN UINT8 Func\r | |
2095 | )\r | |
2096 | {\r | |
d4048391 | 2097 | PCI_IO_DEVICE *PciIoDevice;\r |
9060e3ec | 2098 | EFI_PCI_IO_PROTOCOL *PciIo;\r |
2099 | EFI_STATUS Status;\r | |
2100 | \r | |
2101 | PciIoDevice = AllocateZeroPool (sizeof (PCI_IO_DEVICE));\r | |
2102 | if (PciIoDevice == NULL) {\r | |
2103 | return NULL;\r | |
2104 | }\r | |
2105 | \r | |
2106 | PciIoDevice->Signature = PCI_IO_DEVICE_SIGNATURE;\r | |
2107 | PciIoDevice->Handle = NULL;\r | |
d4048391 | 2108 | PciIoDevice->PciRootBridgeIo = Bridge->PciRootBridgeIo;\r |
9060e3ec | 2109 | PciIoDevice->DevicePath = NULL;\r |
2110 | PciIoDevice->BusNumber = Bus;\r | |
2111 | PciIoDevice->DeviceNumber = Device;\r | |
2112 | PciIoDevice->FunctionNumber = Func;\r | |
2113 | PciIoDevice->Decodes = 0;\r | |
2114 | \r | |
2115 | if (gFullEnumeration) {\r | |
2116 | PciIoDevice->Allocated = FALSE;\r | |
2117 | } else {\r | |
2118 | PciIoDevice->Allocated = TRUE;\r | |
2119 | }\r | |
2120 | \r | |
2121 | PciIoDevice->Registered = FALSE;\r | |
2122 | PciIoDevice->Attributes = 0;\r | |
2123 | PciIoDevice->Supports = 0;\r | |
2124 | PciIoDevice->BusOverride = FALSE;\r | |
2125 | PciIoDevice->AllOpRomProcessed = FALSE;\r | |
2126 | \r | |
2127 | PciIoDevice->IsPciExp = FALSE;\r | |
2128 | \r | |
2129 | CopyMem (&(PciIoDevice->Pci), Pci, sizeof (PCI_TYPE01));\r | |
2130 | \r | |
2131 | //\r | |
2132 | // Initialize the PCI I/O instance structure\r | |
2133 | //\r | |
2134 | InitializePciIoInstance (PciIoDevice);\r | |
2135 | InitializePciDriverOverrideInstance (PciIoDevice);\r | |
2136 | InitializePciLoadFile2 (PciIoDevice);\r | |
2137 | PciIo = &PciIoDevice->PciIo;\r | |
2138 | \r | |
b0bc24af AW |
2139 | //\r |
2140 | // Create a device path for this PCI device and store it into its private data\r | |
2141 | //\r | |
2142 | CreatePciDevicePath (\r | |
2143 | Bridge->DevicePath,\r | |
2144 | PciIoDevice\r | |
2145 | );\r | |
2146 | \r | |
9060e3ec | 2147 | //\r |
2148 | // Detect if PCI Express Device\r | |
2149 | //\r | |
2150 | PciIoDevice->PciExpressCapabilityOffset = 0;\r | |
2151 | Status = LocateCapabilityRegBlock (\r | |
2152 | PciIoDevice,\r | |
2153 | EFI_PCI_CAPABILITY_ID_PCIEXP,\r | |
2154 | &PciIoDevice->PciExpressCapabilityOffset,\r | |
2155 | NULL\r | |
2156 | );\r | |
2157 | if (!EFI_ERROR (Status)) {\r | |
2158 | PciIoDevice->IsPciExp = TRUE;\r | |
2159 | }\r | |
2160 | \r | |
d4048391 | 2161 | if (PcdGetBool (PcdAriSupport)) {\r |
2162 | //\r | |
2163 | // Check if the device is an ARI device.\r | |
2164 | //\r | |
2165 | Status = LocatePciExpressCapabilityRegBlock (\r | |
2166 | PciIoDevice,\r | |
2167 | EFI_PCIE_CAPABILITY_ID_ARI,\r | |
2168 | &PciIoDevice->AriCapabilityOffset,\r | |
2169 | NULL\r | |
2170 | );\r | |
2171 | if (!EFI_ERROR (Status)) {\r | |
2172 | //\r | |
2173 | // We need to enable ARI feature before calculate BusReservation,\r | |
2174 | // because FirstVFOffset and VFStride may change after that.\r | |
2175 | //\r | |
2176 | EFI_PCI_IO_PROTOCOL *ParentPciIo;\r | |
2177 | UINT32 Data32;\r | |
9060e3ec | 2178 | \r |
d4048391 | 2179 | //\r |
2180 | // Check if its parent supports ARI forwarding.\r | |
2181 | //\r | |
2182 | ParentPciIo = &Bridge->PciIo;\r | |
2183 | ParentPciIo->Pci.Read (\r | |
2184 | ParentPciIo, \r | |
2185 | EfiPciIoWidthUint32,\r | |
2186 | Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_OFFSET,\r | |
2187 | 1,\r | |
2188 | &Data32\r | |
2189 | );\r | |
2190 | if ((Data32 & EFI_PCIE_CAPABILITY_DEVICE_CAPABILITIES_2_ARI_FORWARDING) != 0) {\r | |
2191 | //\r | |
2192 | // ARI forward support in bridge, so enable it.\r | |
2193 | //\r | |
2194 | ParentPciIo->Pci.Read (\r | |
2195 | ParentPciIo,\r | |
2196 | EfiPciIoWidthUint32,\r | |
2197 | Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET,\r | |
2198 | 1,\r | |
2199 | &Data32\r | |
2200 | );\r | |
2201 | if ((Data32 & EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_ARI_FORWARDING) == 0) {\r | |
2202 | Data32 |= EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_ARI_FORWARDING;\r | |
2203 | ParentPciIo->Pci.Write (\r | |
2204 | ParentPciIo,\r | |
2205 | EfiPciIoWidthUint32,\r | |
2206 | Bridge->PciExpressCapabilityOffset + EFI_PCIE_CAPABILITY_DEVICE_CONTROL_2_OFFSET,\r | |
2207 | 1,\r | |
2208 | &Data32\r | |
2209 | );\r | |
2210 | DEBUG ((\r | |
2211 | EFI_D_INFO,\r | |
8db6a82c RN |
2212 | " ARI: forwarding enabled for PPB[%02x:%02x:%02x]\n",\r |
2213 | Bridge->BusNumber,\r | |
2214 | Bridge->DeviceNumber,\r | |
2215 | Bridge->FunctionNumber\r | |
d4048391 | 2216 | ));\r |
2217 | }\r | |
2218 | }\r | |
9060e3ec | 2219 | \r |
8db6a82c | 2220 | DEBUG ((EFI_D_INFO, " ARI: CapOffset = 0x%x\n", PciIoDevice->AriCapabilityOffset));\r |
d4048391 | 2221 | }\r |
9060e3ec | 2222 | }\r |
2223 | \r | |
2224 | //\r | |
d4048391 | 2225 | // Initialization for SR-IOV\r |
9060e3ec | 2226 | //\r |
9060e3ec | 2227 | \r |
d4048391 | 2228 | if (PcdGetBool (PcdSrIovSupport)) {\r |
2229 | Status = LocatePciExpressCapabilityRegBlock (\r | |
2230 | PciIoDevice,\r | |
2231 | EFI_PCIE_CAPABILITY_ID_SRIOV,\r | |
2232 | &PciIoDevice->SrIovCapabilityOffset,\r | |
2233 | NULL\r | |
2234 | );\r | |
2235 | if (!EFI_ERROR (Status)) {\r | |
8db6a82c | 2236 | UINT32 SupportedPageSize;\r |
d4048391 | 2237 | UINT16 VFStride;\r |
2238 | UINT16 FirstVFOffset;\r | |
2239 | UINT16 Data16;\r | |
2240 | UINT32 PFRid;\r | |
2241 | UINT32 LastVF;\r | |
2242 | \r | |
2243 | //\r | |
2244 | // If the SR-IOV device is an ARI device, then Set ARI Capable Hierarchy for the device.\r | |
2245 | //\r | |
2246 | if (PcdGetBool (PcdAriSupport) && PciIoDevice->AriCapabilityOffset != 0) {\r | |
2247 | PciIo->Pci.Read (\r | |
2248 | PciIo,\r | |
2249 | EfiPciIoWidthUint16,\r | |
2250 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL,\r | |
2251 | 1,\r | |
2252 | &Data16\r | |
2253 | );\r | |
2254 | Data16 |= EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL_ARI_HIERARCHY;\r | |
2255 | PciIo->Pci.Write (\r | |
2256 | PciIo,\r | |
2257 | EfiPciIoWidthUint16,\r | |
2258 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_CONTROL,\r | |
2259 | 1,\r | |
2260 | &Data16\r | |
2261 | );\r | |
2262 | }\r | |
9060e3ec | 2263 | \r |
d4048391 | 2264 | //\r |
2265 | // Calculate SystemPageSize\r | |
2266 | //\r | |
9060e3ec | 2267 | \r |
d4048391 | 2268 | PciIo->Pci.Read (\r |
2269 | PciIo,\r | |
2270 | EfiPciIoWidthUint32,\r | |
2271 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_SUPPORTED_PAGE_SIZE,\r | |
2272 | 1,\r | |
8db6a82c | 2273 | &SupportedPageSize\r |
d4048391 | 2274 | );\r |
8db6a82c | 2275 | PciIoDevice->SystemPageSize = (PcdGet32 (PcdSrIovSystemPageSize) & SupportedPageSize);\r |
d4048391 | 2276 | ASSERT (PciIoDevice->SystemPageSize != 0);\r |
2277 | \r | |
2278 | PciIo->Pci.Write (\r | |
2279 | PciIo,\r | |
2280 | EfiPciIoWidthUint32,\r | |
2281 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_SYSTEM_PAGE_SIZE,\r | |
2282 | 1,\r | |
2283 | &PciIoDevice->SystemPageSize\r | |
2284 | );\r | |
d4048391 | 2285 | //\r |
2286 | // Adjust SystemPageSize for Alignment usage later\r | |
2287 | //\r | |
2288 | PciIoDevice->SystemPageSize <<= 12;\r | |
9060e3ec | 2289 | \r |
d4048391 | 2290 | //\r |
2291 | // Calculate BusReservation for PCI IOV\r | |
2292 | //\r | |
9060e3ec | 2293 | \r |
d4048391 | 2294 | //\r |
2295 | // Read First FirstVFOffset, InitialVFs, and VFStride\r | |
2296 | //\r | |
2297 | PciIo->Pci.Read (\r | |
2298 | PciIo,\r | |
2299 | EfiPciIoWidthUint16,\r | |
2300 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_FIRSTVF,\r | |
2301 | 1,\r | |
2302 | &FirstVFOffset\r | |
2303 | );\r | |
d4048391 | 2304 | PciIo->Pci.Read (\r |
2305 | PciIo,\r | |
2306 | EfiPciIoWidthUint16,\r | |
2307 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_INITIALVFS,\r | |
2308 | 1,\r | |
2309 | &PciIoDevice->InitialVFs\r | |
2310 | );\r | |
d4048391 | 2311 | PciIo->Pci.Read (\r |
2312 | PciIo,\r | |
2313 | EfiPciIoWidthUint16,\r | |
2314 | PciIoDevice->SrIovCapabilityOffset + EFI_PCIE_CAPABILITY_ID_SRIOV_VFSTRIDE,\r | |
2315 | 1,\r | |
2316 | &VFStride\r | |
2317 | );\r | |
d4048391 | 2318 | //\r |
2319 | // Calculate LastVF\r | |
2320 | //\r | |
2321 | PFRid = EFI_PCI_RID(Bus, Device, Func);\r | |
2322 | LastVF = PFRid + FirstVFOffset + (PciIoDevice->InitialVFs - 1) * VFStride;\r | |
9060e3ec | 2323 | \r |
d4048391 | 2324 | //\r |
2325 | // Calculate ReservedBusNum for this PF\r | |
2326 | //\r | |
2327 | PciIoDevice->ReservedBusNum = (UINT16)(EFI_PCI_BUS_OF_RID (LastVF) - Bus + 1);\r | |
8db6a82c | 2328 | \r |
d4048391 | 2329 | DEBUG ((\r |
2330 | EFI_D_INFO,\r | |
8db6a82c RN |
2331 | " SR-IOV: SupportedPageSize = 0x%x; SystemPageSize = 0x%x; FirstVFOffset = 0x%x;\n",\r |
2332 | SupportedPageSize, PciIoDevice->SystemPageSize >> 12, FirstVFOffset\r | |
d4048391 | 2333 | ));\r |
d4048391 | 2334 | DEBUG ((\r |
2335 | EFI_D_INFO,\r | |
8db6a82c RN |
2336 | " InitialVFs = 0x%x; ReservedBusNum = 0x%x; CapOffset = 0x%x\n",\r |
2337 | PciIoDevice->InitialVFs, PciIoDevice->ReservedBusNum, PciIoDevice->SrIovCapabilityOffset\r | |
d4048391 | 2338 | ));\r |
2339 | }\r | |
9060e3ec | 2340 | }\r |
2341 | \r | |
d4048391 | 2342 | if (PcdGetBool (PcdMrIovSupport)) {\r |
2343 | Status = LocatePciExpressCapabilityRegBlock (\r | |
2344 | PciIoDevice,\r | |
2345 | EFI_PCIE_CAPABILITY_ID_MRIOV,\r | |
2346 | &PciIoDevice->MrIovCapabilityOffset,\r | |
2347 | NULL\r | |
2348 | );\r | |
2349 | if (!EFI_ERROR (Status)) {\r | |
8db6a82c | 2350 | DEBUG ((EFI_D_INFO, " MR-IOV: CapOffset = 0x%x\n", PciIoDevice->MrIovCapabilityOffset));\r |
d4048391 | 2351 | }\r |
2352 | }\r | |
9060e3ec | 2353 | \r |
2354 | //\r | |
2355 | // Initialize the reserved resource list\r | |
2356 | //\r | |
2357 | InitializeListHead (&PciIoDevice->ReservedResourceList);\r | |
2358 | \r | |
2359 | //\r | |
2360 | // Initialize the driver list\r | |
2361 | //\r | |
2362 | InitializeListHead (&PciIoDevice->OptionRomDriverList);\r | |
2363 | \r | |
2364 | //\r | |
2365 | // Initialize the child list\r | |
2366 | //\r | |
2367 | InitializeListHead (&PciIoDevice->ChildList);\r | |
2368 | \r | |
2369 | return PciIoDevice;\r | |
2370 | }\r | |
2371 | \r | |
2372 | /**\r | |
2373 | This routine is used to enumerate entire pci bus system\r | |
2374 | in a given platform.\r | |
2375 | \r | |
2376 | It is only called on the second start on the same Root Bridge.\r | |
2377 | \r | |
2378 | @param Controller Parent bridge handler.\r | |
2379 | \r | |
2380 | @retval EFI_SUCCESS PCI enumeration finished successfully.\r | |
2381 | @retval other Some error occurred when enumerating the pci bus system.\r | |
2382 | \r | |
2383 | **/\r | |
2384 | EFI_STATUS\r | |
2385 | PciEnumeratorLight (\r | |
2386 | IN EFI_HANDLE Controller\r | |
2387 | )\r | |
2388 | {\r | |
2389 | \r | |
2390 | EFI_STATUS Status;\r | |
2391 | EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;\r | |
2392 | PCI_IO_DEVICE *RootBridgeDev;\r | |
2393 | UINT16 MinBus;\r | |
2394 | UINT16 MaxBus;\r | |
2395 | EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Descriptors;\r | |
2396 | \r | |
2397 | MinBus = 0;\r | |
2398 | MaxBus = PCI_MAX_BUS;\r | |
2399 | Descriptors = NULL;\r | |
2400 | \r | |
2401 | //\r | |
2402 | // If this root bridge has been already enumerated, then return successfully\r | |
2403 | //\r | |
2404 | if (GetRootBridgeByHandle (Controller) != NULL) {\r | |
2405 | return EFI_SUCCESS;\r | |
2406 | }\r | |
2407 | \r | |
2408 | //\r | |
2409 | // Open pci root bridge io protocol\r | |
2410 | //\r | |
2411 | Status = gBS->OpenProtocol (\r | |
2412 | Controller,\r | |
2413 | &gEfiPciRootBridgeIoProtocolGuid,\r | |
2414 | (VOID **) &PciRootBridgeIo,\r | |
2415 | gPciBusDriverBinding.DriverBindingHandle,\r | |
2416 | Controller,\r | |
2417 | EFI_OPEN_PROTOCOL_BY_DRIVER\r | |
2418 | );\r | |
2419 | if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {\r | |
2420 | return Status;\r | |
2421 | }\r | |
2422 | \r | |
2423 | Status = PciRootBridgeIo->Configuration (PciRootBridgeIo, (VOID **) &Descriptors);\r | |
2424 | \r | |
2425 | if (EFI_ERROR (Status)) {\r | |
2426 | return Status;\r | |
2427 | }\r | |
2428 | \r | |
2429 | while (PciGetBusRange (&Descriptors, &MinBus, &MaxBus, NULL) == EFI_SUCCESS) {\r | |
2430 | \r | |
2431 | //\r | |
2432 | // Create a device node for root bridge device with a NULL host bridge controller handle\r | |
2433 | //\r | |
2434 | RootBridgeDev = CreateRootBridge (Controller);\r | |
2435 | \r | |
2436 | if (RootBridgeDev == NULL) {\r | |
2437 | Descriptors++;\r | |
2438 | continue;\r | |
2439 | }\r | |
2440 | \r | |
2441 | //\r | |
2442 | // Record the root bridgeio protocol\r | |
2443 | //\r | |
2444 | RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo;\r | |
2445 | \r | |
2446 | Status = PciPciDeviceInfoCollector (\r | |
2447 | RootBridgeDev,\r | |
2448 | (UINT8) MinBus\r | |
2449 | );\r | |
2450 | \r | |
2451 | if (!EFI_ERROR (Status)) {\r | |
2452 | \r | |
2453 | //\r | |
2454 | // Remove those PCI devices which are rejected when full enumeration\r | |
2455 | //\r | |
2456 | RemoveRejectedPciDevices (RootBridgeDev->Handle, RootBridgeDev);\r | |
2457 | \r | |
2458 | //\r | |
2459 | // Process option rom light\r | |
2460 | //\r | |
2461 | ProcessOptionRomLight (RootBridgeDev);\r | |
2462 | \r | |
2463 | //\r | |
2464 | // Determine attributes for all devices under this root bridge\r | |
2465 | //\r | |
2466 | DetermineDeviceAttribute (RootBridgeDev);\r | |
2467 | \r | |
2468 | //\r | |
2469 | // If successfully, insert the node into device pool\r | |
2470 | //\r | |
2471 | InsertRootBridge (RootBridgeDev);\r | |
2472 | } else {\r | |
2473 | \r | |
2474 | //\r | |
2475 | // If unsuccessly, destroy the entire node\r | |
2476 | //\r | |
2477 | DestroyRootBridge (RootBridgeDev);\r | |
2478 | }\r | |
2479 | \r | |
2480 | Descriptors++;\r | |
2481 | }\r | |
2482 | \r | |
2483 | return EFI_SUCCESS;\r | |
2484 | }\r | |
2485 | \r | |
2486 | /**\r | |
2487 | Get bus range from PCI resource descriptor list.\r | |
2488 | \r | |
2489 | @param Descriptors A pointer to the address space descriptor.\r | |
2490 | @param MinBus The min bus returned.\r | |
2491 | @param MaxBus The max bus returned.\r | |
2492 | @param BusRange The bus range returned.\r | |
2493 | \r | |
2494 | @retval EFI_SUCCESS Successfully got bus range.\r | |
2495 | @retval EFI_NOT_FOUND Can not find the specific bus.\r | |
2496 | \r | |
2497 | **/\r | |
2498 | EFI_STATUS\r | |
2499 | PciGetBusRange (\r | |
2500 | IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR **Descriptors,\r | |
2501 | OUT UINT16 *MinBus,\r | |
2502 | OUT UINT16 *MaxBus,\r | |
2503 | OUT UINT16 *BusRange\r | |
2504 | )\r | |
2505 | {\r | |
2506 | while ((*Descriptors)->Desc != ACPI_END_TAG_DESCRIPTOR) {\r | |
2507 | if ((*Descriptors)->ResType == ACPI_ADDRESS_SPACE_TYPE_BUS) {\r | |
2508 | if (MinBus != NULL) {\r | |
2509 | *MinBus = (UINT16) (*Descriptors)->AddrRangeMin;\r | |
2510 | }\r | |
2511 | \r | |
2512 | if (MaxBus != NULL) {\r | |
2513 | *MaxBus = (UINT16) (*Descriptors)->AddrRangeMax;\r | |
2514 | }\r | |
2515 | \r | |
2516 | if (BusRange != NULL) {\r | |
2517 | *BusRange = (UINT16) (*Descriptors)->AddrLen;\r | |
2518 | }\r | |
2519 | \r | |
2520 | return EFI_SUCCESS;\r | |
2521 | }\r | |
2522 | \r | |
2523 | (*Descriptors)++;\r | |
2524 | }\r | |
2525 | \r | |
2526 | return EFI_NOT_FOUND;\r | |
2527 | }\r | |
2528 | \r | |
2529 | /**\r | |
2530 | This routine can be used to start the root bridge.\r | |
2531 | \r | |
2532 | @param RootBridgeDev Pci device instance.\r | |
2533 | \r | |
2534 | @retval EFI_SUCCESS This device started.\r | |
2535 | @retval other Failed to get PCI Root Bridge I/O protocol.\r | |
2536 | \r | |
2537 | **/\r | |
2538 | EFI_STATUS\r | |
2539 | StartManagingRootBridge (\r | |
2540 | IN PCI_IO_DEVICE *RootBridgeDev\r | |
2541 | )\r | |
2542 | {\r | |
2543 | EFI_HANDLE RootBridgeHandle;\r | |
2544 | EFI_STATUS Status;\r | |
2545 | EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;\r | |
2546 | \r | |
2547 | //\r | |
2548 | // Get the root bridge handle\r | |
2549 | //\r | |
2550 | RootBridgeHandle = RootBridgeDev->Handle;\r | |
2551 | PciRootBridgeIo = NULL;\r | |
2552 | \r | |
2553 | //\r | |
2554 | // Get the pci root bridge io protocol\r | |
2555 | //\r | |
2556 | Status = gBS->OpenProtocol (\r | |
2557 | RootBridgeHandle,\r | |
2558 | &gEfiPciRootBridgeIoProtocolGuid,\r | |
2559 | (VOID **) &PciRootBridgeIo,\r | |
2560 | gPciBusDriverBinding.DriverBindingHandle,\r | |
2561 | RootBridgeHandle,\r | |
2562 | EFI_OPEN_PROTOCOL_BY_DRIVER\r | |
2563 | );\r | |
2564 | \r | |
2565 | if (EFI_ERROR (Status) && Status != EFI_ALREADY_STARTED) {\r | |
2566 | return Status;\r | |
2567 | }\r | |
2568 | \r | |
2569 | //\r | |
2570 | // Store the PciRootBridgeIo protocol into root bridge private data\r | |
2571 | //\r | |
2572 | RootBridgeDev->PciRootBridgeIo = PciRootBridgeIo;\r | |
2573 | \r | |
2574 | return EFI_SUCCESS;\r | |
2575 | \r | |
2576 | }\r | |
2577 | \r | |
2578 | /**\r | |
2579 | This routine can be used to check whether a PCI device should be rejected when light enumeration.\r | |
2580 | \r | |
2581 | @param PciIoDevice Pci device instance.\r | |
2582 | \r | |
2583 | @retval TRUE This device should be rejected.\r | |
2584 | @retval FALSE This device shouldn't be rejected.\r | |
2585 | \r | |
2586 | **/\r | |
2587 | BOOLEAN\r | |
2588 | IsPciDeviceRejected (\r | |
2589 | IN PCI_IO_DEVICE *PciIoDevice\r | |
2590 | )\r | |
2591 | {\r | |
2592 | EFI_STATUS Status;\r | |
2593 | UINT32 TestValue;\r | |
2594 | UINT32 OldValue;\r | |
2595 | UINT32 Mask;\r | |
2596 | UINT8 BarOffset;\r | |
2597 | \r | |
2598 | //\r | |
2599 | // PPB should be skip!\r | |
2600 | //\r | |
2601 | if (IS_PCI_BRIDGE (&PciIoDevice->Pci)) {\r | |
2602 | return FALSE;\r | |
2603 | }\r | |
2604 | \r | |
2605 | if (IS_CARDBUS_BRIDGE (&PciIoDevice->Pci)) {\r | |
2606 | //\r | |
2607 | // Only test base registers for P2C\r | |
2608 | //\r | |
2609 | for (BarOffset = 0x1C; BarOffset <= 0x38; BarOffset += 2 * sizeof (UINT32)) {\r | |
2610 | \r | |
2611 | Mask = (BarOffset < 0x2C) ? 0xFFFFF000 : 0xFFFFFFFC;\r | |
2612 | Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);\r | |
2613 | if (EFI_ERROR (Status)) {\r | |
2614 | continue;\r | |
2615 | }\r | |
2616 | \r | |
2617 | TestValue = TestValue & Mask;\r | |
2618 | if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {\r | |
2619 | //\r | |
2620 | // The bar isn't programed, so it should be rejected\r | |
2621 | //\r | |
2622 | return TRUE;\r | |
2623 | }\r | |
2624 | }\r | |
2625 | \r | |
2626 | return FALSE;\r | |
2627 | }\r | |
2628 | \r | |
2629 | for (BarOffset = 0x14; BarOffset <= 0x24; BarOffset += sizeof (UINT32)) {\r | |
2630 | //\r | |
2631 | // Test PCI devices\r | |
2632 | //\r | |
2633 | Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);\r | |
2634 | if (EFI_ERROR (Status)) {\r | |
2635 | continue;\r | |
2636 | }\r | |
2637 | \r | |
2638 | if ((TestValue & 0x01) != 0) {\r | |
2639 | \r | |
2640 | //\r | |
2641 | // IO Bar\r | |
2642 | //\r | |
2643 | Mask = 0xFFFFFFFC;\r | |
2644 | TestValue = TestValue & Mask;\r | |
2645 | if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {\r | |
2646 | return TRUE;\r | |
2647 | }\r | |
2648 | \r | |
2649 | } else {\r | |
2650 | \r | |
2651 | //\r | |
2652 | // Mem Bar\r | |
2653 | //\r | |
2654 | Mask = 0xFFFFFFF0;\r | |
2655 | TestValue = TestValue & Mask;\r | |
2656 | \r | |
2657 | if ((TestValue & 0x07) == 0x04) {\r | |
2658 | \r | |
2659 | //\r | |
2660 | // Mem64 or PMem64\r | |
2661 | //\r | |
2662 | BarOffset += sizeof (UINT32);\r | |
2663 | if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {\r | |
2664 | \r | |
2665 | //\r | |
2666 | // Test its high 32-Bit BAR\r | |
2667 | //\r | |
2668 | Status = BarExisted (PciIoDevice, BarOffset, &TestValue, &OldValue);\r | |
2669 | if (TestValue == OldValue) {\r | |
2670 | return TRUE;\r | |
2671 | }\r | |
2672 | }\r | |
2673 | \r | |
2674 | } else {\r | |
2675 | \r | |
2676 | //\r | |
2677 | // Mem32 or PMem32\r | |
2678 | //\r | |
2679 | if ((TestValue != 0) && (TestValue == (OldValue & Mask))) {\r | |
2680 | return TRUE;\r | |
2681 | }\r | |
2682 | }\r | |
2683 | }\r | |
2684 | }\r | |
2685 | \r | |
2686 | return FALSE;\r | |
2687 | }\r | |
2688 | \r | |
2689 | /**\r | |
2690 | Reset all bus number from specific bridge.\r | |
2691 | \r | |
2692 | @param Bridge Parent specific bridge.\r | |
2693 | @param StartBusNumber Start bus number.\r | |
2694 | \r | |
2695 | **/\r | |
2696 | VOID\r | |
2697 | ResetAllPpbBusNumber (\r | |
2698 | IN PCI_IO_DEVICE *Bridge,\r | |
2699 | IN UINT8 StartBusNumber\r | |
2700 | )\r | |
2701 | {\r | |
2702 | EFI_STATUS Status;\r | |
2703 | PCI_TYPE00 Pci;\r | |
2704 | UINT8 Device;\r | |
2705 | UINT32 Register;\r | |
2706 | UINT8 Func;\r | |
2707 | UINT64 Address;\r | |
2708 | UINT8 SecondaryBus;\r | |
2709 | EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *PciRootBridgeIo;\r | |
2710 | \r | |
2711 | PciRootBridgeIo = Bridge->PciRootBridgeIo;\r | |
2712 | \r | |
2713 | for (Device = 0; Device <= PCI_MAX_DEVICE; Device++) {\r | |
2714 | for (Func = 0; Func <= PCI_MAX_FUNC; Func++) {\r | |
2715 | \r | |
2716 | //\r | |
2717 | // Check to see whether a pci device is present\r | |
2718 | //\r | |
2719 | Status = PciDevicePresent (\r | |
2720 | PciRootBridgeIo,\r | |
2721 | &Pci,\r | |
2722 | StartBusNumber,\r | |
2723 | Device,\r | |
2724 | Func\r | |
2725 | );\r | |
2726 | \r | |
25a26646 JS |
2727 | if (EFI_ERROR (Status) && Func == 0) {\r |
2728 | //\r | |
2729 | // go to next device if there is no Function 0\r | |
2730 | //\r | |
2731 | break;\r | |
2732 | }\r | |
2733 | \r | |
9060e3ec | 2734 | if (!EFI_ERROR (Status) && (IS_PCI_BRIDGE (&Pci))) {\r |
2735 | \r | |
2736 | Register = 0;\r | |
2737 | Address = EFI_PCI_ADDRESS (StartBusNumber, Device, Func, 0x18);\r | |
2738 | Status = PciRootBridgeIo->Pci.Read (\r | |
2739 | PciRootBridgeIo,\r | |
2740 | EfiPciWidthUint32,\r | |
2741 | Address,\r | |
2742 | 1,\r | |
2743 | &Register\r | |
2744 | );\r | |
2745 | SecondaryBus = (UINT8)(Register >> 8);\r | |
2746 | \r | |
2747 | if (SecondaryBus != 0) {\r | |
2748 | ResetAllPpbBusNumber (Bridge, SecondaryBus);\r | |
2749 | }\r | |
2750 | \r | |
2751 | //\r | |
2752 | // Reset register 18h, 19h, 1Ah on PCI Bridge\r | |
2753 | //\r | |
2754 | Register &= 0xFF000000;\r | |
2755 | Status = PciRootBridgeIo->Pci.Write (\r | |
2756 | PciRootBridgeIo,\r | |
2757 | EfiPciWidthUint32,\r | |
2758 | Address,\r | |
2759 | 1,\r | |
2760 | &Register\r | |
2761 | );\r | |
2762 | }\r | |
2763 | \r | |
2764 | if (Func == 0 && !IS_PCI_MULTI_FUNC (&Pci)) {\r | |
2765 | //\r | |
2766 | // Skip sub functions, this is not a multi function device\r | |
2767 | //\r | |
2768 | Func = PCI_MAX_FUNC;\r | |
2769 | }\r | |
2770 | }\r | |
2771 | }\r | |
2772 | }\r | |
2773 | \r |