remove some const modifier to spec compliance.

[mirror_edk2.git] / MdeModulePkg / Bus / Usb / UsbBusDxe / UsbHub.h

/** @file\r
\r
    The definition for USB hub.\r
\r
Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#ifndef _USB_HUB_H_\r
#define _USB_HUB_H_\r
\r
#include <IndustryStandard/Usb.h>\r
\r
#define USB_ENDPOINT_ADDR(EpAddr) ((EpAddr) & 0x7F)\r
#define USB_ENDPOINT_TYPE(Desc)   ((Desc)->Attributes & USB_ENDPOINT_TYPE_MASK)\r
\r
\r
#define USB_DESC_TYPE_HUB     0x29\r
//\r
// Hub class control transfer target\r
//\r
#define USB_HUB_TARGET_HUB    0\r
#define USB_HUB_TARGET_PORT   3\r
//\r
// HUB class specific contrl transfer request type\r
//\r
#define USB_HUB_REQ_GET_STATUS      0\r
#define USB_HUB_REQ_CLEAR_FEATURE   1\r
#define USB_HUB_REQ_SET_FEATURE     3\r
#define USB_HUB_REQ_GET_DESC        6\r
#define USB_HUB_REQ_SET_DESC        7\r
#define USB_HUB_REQ_CLEAR_TT        8\r
#define USB_HUB_REQ_RESET_TT        9\r
#define USB_HUB_REQ_GET_TT_STATE    10\r
#define USB_HUB_REQ_STOP_TT         11\r
//\r
// USB hub class feature selector\r
//\r
#define USB_HUB_C_HUB_LOCAL_POWER   0\r
#define USB_HUB_C_HUB_OVER_CURRENT  1\r
#define USB_HUB_PORT_CONNECTION     0\r
#define USB_HUB_PORT_ENABLE         1\r
#define USB_HUB_PORT_SUSPEND        2\r
#define USB_HUB_PORT_OVER_CURRENT   3\r
#define USB_HUB_PORT_RESET          4\r
#define USB_HUB_PORT_POWER          8\r
#define USB_HUB_PORT_LOW_SPEED      9\r
#define USB_HUB_C_PORT_CONNECT      16\r
#define USB_HUB_C_PORT_ENABLE       17\r
#define USB_HUB_C_PORT_SUSPEND      18\r
#define USB_HUB_C_PORT_OVER_CURRENT 19\r
#define USB_HUB_C_PORT_RESET        20\r
#define USB_HUB_PORT_TEST           21\r
#define USB_HUB_PORT_INDICATOR      22\r
//\r
// USB hub power control method. In gang power control\r
//\r
#define USB_HUB_GANG_POWER_CTRL     0\r
#define USB_HUB_PORT_POWER_CTRL     0x01\r
//\r
// USB hub status bits\r
//\r
#define USB_HUB_STAT_LOCAL_POWER    0x01\r
#define USB_HUB_STAT_OVER_CURRENT   0x02\r
#define USB_HUB_STAT_C_LOCAL_POWER  0x01\r
#define USB_HUB_STAT_C_OVER_CURRENT 0x02\r
\r
#define USB_HUB_CLASS_CODE          0x09\r
#define USB_HUB_SUBCLASS_CODE       0x00\r
\r
//\r
// Host software return timeout if port status doesn't change \r
// after 500ms(LOOP * STALL = 100 * 5ms), set by experience\r
//\r
#define USB_WAIT_PORT_STS_CHANGE_LOOP  100\r
\r
#pragma pack(1)\r
//\r
// Hub descriptor, the last two fields are of variable lenght.\r
//\r
typedef struct {\r
  UINT8           Length;\r
  UINT8           DescType;\r
  UINT8           NumPorts;\r
  UINT16          HubCharacter;\r
  UINT8           PwrOn2PwrGood;\r
  UINT8           HubContrCurrent;\r
  UINT8           Filler[16];\r
} EFI_USB_HUB_DESCRIPTOR;\r
#pragma pack()\r
\r
\r
typedef struct {\r
  UINT16                ChangedBit;\r
  EFI_USB_PORT_FEATURE  Feature;\r
} USB_CHANGE_FEATURE_MAP;\r
\r
\r
/**\r
  Clear the transaction translate buffer if full/low\r
  speed control/bulk transfer failed and the transfer\r
  uses this hub as translator.Remember to clear the TT\r
  buffer of transaction translator, not that of the\r
  parent.\r
\r
  @param  UsbDev                The Usb device.\r
  @param  Port                  The port of the hub.\r
  @param  DevAddr               Address of the failed transaction.\r
  @param  EpNum                 The endpoint number of the failed transaction.\r
  @param  EpType                The type of failed transaction.\r
\r
  @retval EFI_SUCCESS           The TT buffer is cleared.\r
  @retval Others                Failed to clear the TT buffer.\r
\r
**/\r
EFI_STATUS\r
UsbHubCtrlClearTTBuffer (\r
  IN USB_DEVICE           *UsbDev,\r
  IN UINT8                Port,\r
  IN UINT16               DevAddr,\r
  IN UINT16               EpNum,\r
  IN UINT16               EpType\r
  );\r
\r
\r
/**\r
  Test whether the interface is a hub interface.\r
\r
  @param  UsbIf                 The interface to test.\r
\r
  @retval TRUE                  The interface is a hub interface.\r
  @retval FALSE                 The interface isn't a hub interface.\r
\r
**/\r
BOOLEAN\r
UsbIsHubInterface (\r
  IN USB_INTERFACE        *UsbIf\r
  );\r
\r
\r
/**\r
  Ack the hub change bits. If these bits are not ACKed, Hub will\r
  always return changed bit map from its interrupt endpoint.\r
\r
  @param  UsbDev                The Usb device.\r
\r
  @retval EFI_SUCCESS           The hub change status is ACKed.\r
  @retval Others                Failed to ACK the hub status.\r
\r
**/\r
EFI_STATUS\r
UsbHubAckHubStatus (\r
  IN  USB_DEVICE         *UsbDev\r
  );\r
\r
extern USB_HUB_API        mUsbHubApi;\r
extern USB_HUB_API        mUsbRootHubApi;\r
#endif\r
\r