[mirror_edk2.git] / MdePkg / Include / Ppi / Smbus2.h

/** @file\r
  This file declares Smbus2 PPI.\r
\r
  Copyright (c) 2006 - 2007, Intel Corporation                                                         \r
  All rights reserved. This program and the accompanying materials                          \r
  are licensed and made available under the terms and conditions of the BSD License         \r
  which accompanies this distribution.  The full text of the license may be found at        \r
  http://opensource.org/licenses/bsd-license.php                                            \r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             \r
\r
  @par Revision Reference:\r
  This PPI is defined in PI.\r
  Version 1.00\r
\r
**/\r
\r
#ifndef _PEI_SMBUS2_PPI_H\r
#define _PEI_SMBUS2_PPI_H\r
\r
#include <IndustryStandard/SmBus.h>\r
\r
#define EFI_PEI_SMBUS2_PPI_GUID \\r
  { 0x9ca93627, 0xb65b, 0x4324, { 0xa2, 0x2, 0xc0, 0xb4, 0x61, 0x76, 0x45, 0x43 } }\r
\r
\r
typedef struct _EFI_PEI_SMBUS2_PPI EFI_PEI_SMBUS2_PPI;\r
\r
//\r
// EFI_SMBUS_DEVICE_COMMAND\r
//\r
typedef UINTN   EFI_SMBUS_DEVICE_COMMAND;\r
\r
\r
/*\r
  Executes an SMBus operation to an SMBus controller.\r
\r
  @param  This            A pointer to the EFI_PEI_SMBUS2_PPI instance.\r
  @param  SlaveAddress    The SMBUS hardware address to which the SMBUS device is preassigned or\r
                          allocated.\r
  @param  Command         This command is transmitted by the SMBus host controller to the SMBus slave \r
                          device and the interpretation is SMBus slave device specific. \r
                          It can mean the offset to a list of functions inside \r
                          an SMBus slave device. Not all operations or slave devices support\r
                          this command's registers.\r
\r
  @param  Operation       Signifies which particular SMBus hardware protocol instance that it \r
                          will use to execute the SMBus transactions. \r
                          This SMBus hardware protocol is defined by the System Management Bus (SMBus) \r
                          Specification and is not related to UEFI.\r
\r
  @param  PecCheck        Defines if Packet Error Code (PEC) checking is required for this operation.\r
\r
  @param  Length          Signifies the number of bytes that this operation will do. \r
                          The maximum number of bytes can be revision specific and operation specific.\r
                          This parameter will contain the actual number of bytes that are executed\r
                          for this operation. Not all operations require this argument.\r
\r
  @param  Buffer          Contains the value of data to execute to the SMBus slave device. \r
                          Not all operations require this argument. \r
                          The length of this buffer is identified by Length.\r
\r
\r
  @retval EFI_SUCCESS           The last data that was returned from the access\r
                                matched the poll exit criteria.\r
  @retval EFI_CRC_ERROR         The checksum is not correct (PEC is incorrect)\r
  @retval EFI_TIMEOUT           Timeout expired before the operation was completed.\r
                                Timeout is determined by the SMBus host controller device.\r
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed\r
                                due to a lack of resources.\r
  @retval EFI_DEVICE_ERROR      The request was not completed because\r
                                a failure reflected in the Host Status Register bit.\r
  @retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.\r
                                Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
                                EfiSmbusQuickWrite. Length is outside the range of valid values.\r
  @retval EFI_UNSUPPORTED       The SMBus operation or PEC is not supported.\r
  @retval EFI_BUFFER_TOO_SMALL  Buffer is not sufficient for this operation.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION) (\r
  IN CONST  EFI_PEI_SMBUS2_PPI        *This,\r
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,\r
  IN CONST  EFI_SMBUS_DEVICE_COMMAND  Command,\r
  IN CONST  EFI_SMBUS_OPERATION       Operation,\r
  IN CONST  BOOLEAN                   PecCheck,\r
  IN OUT    UINTN                     *Length,\r
  IN OUT    VOID                      *Buffer\r
);\r
\r
/**\r
  CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.\r
\r
  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.\r
  @param  SlaveAddress   The SMBUS hardware address to which the SMBUS\r
                         device is preassigned or allocated.\r
  @param  Data           Data of the SMBus host notify command that\r
                         the caller wants to be called.\r
\r
  @return Status Code\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS_NOTIFY2_FUNCTION) (\r
  IN CONST  EFI_PEI_SMBUS2_PPI        *SmbusPpi,\r
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS  SlaveAddress,\r
  IN CONST  UINTN                     Data\r
);\r
/**\r
  The ArpDevice() function enumerates the entire bus or enumerates a specific \r
  device that is identified by SmbusUdid. \r
\r
  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.\r
  @param  ArpAll         A Boolean expression that indicates if the host drivers need\r
                         to enumerate all the devices or enumerate only the device that is identified\r
                         by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.\r
                         If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
                         will be at SlaveAddress.\r
  @param  SmbusUdid      The targeted SMBus Unique Device Identifier (UDID).\r
                         The UDID may not exist for SMBus devices with fixed addresses.\r
  @param  SlaveAddress   The new SMBus address for the slave device for\r
                         which the operation is targeted.\r
\r
  @retval EFI_SUCCESS           The SMBus slave device address was set.\r
  @retval EFI_INVALID_PARAMETER SlaveAddress is NULL.\r
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed\r
                                due to a lack of resources.\r
  @retval EFI_TIMEOUT           The SMBus slave device did not respond.\r
  @retval EFI_DEVICE_ERROR      The request was not completed because the transaction failed.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS2_PPI_ARP_DEVICE) (\r
  IN CONST  EFI_PEI_SMBUS2_PPI        *This,\r
  IN CONST  BOOLEAN                   ArpAll,\r
  IN CONST  EFI_SMBUS_UDID            *SmbusUdid, OPTIONAL\r
  IN OUT    EFI_SMBUS_DEVICE_ADDRESS  *SlaveAddress OPTIONAL\r
);\r
\r
\r
typedef struct {\r
  EFI_SMBUS_DEVICE_ADDRESS  SmbusDeviceAddress;\r
  EFI_SMBUS_UDID            SmbusDeviceUdid;\r
} EFI_SMBUS_DEVICE_MAP;\r
\r
/**\r
  The GetArpMap() function returns the mapping of all the SMBus devices \r
  that are enumerated by the SMBus host driver. \r
\r
  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.\r
  @param  Length         Size of the buffer that contains the SMBus device map.\r
  @param  SmbusDeviceMap The pointer to the device map as enumerated\r
                         by the SMBus controller driver.\r
\r
  @retval EFI_SUCCESS           The device map was returned correctly in the buffer.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS2_PPI_GET_ARP_MAP) (\r
  IN CONST  EFI_PEI_SMBUS2_PPI    *This,\r
  IN OUT    UINTN                 *Length,\r
  IN OUT    EFI_SMBUS_DEVICE_MAP  **SmbusDeviceMap\r
);\r
\r
\r
/**\r
  The Notify() function registers all the callback functions to allow the \r
  bus driver to call these functions when the SlaveAddress/Data pair happens.\r
\r
  @param  PeiServices    A pointer to the system PEI Services Table.\r
  @param  This           A pointer to the EFI_PEI_SMBUS_PPI instance.\r
  @param  SlaveAddress   Address that the host controller detects as\r
                         sending a message and calls all the registered functions.\r
  @param  Data           Data that the host controller detects as sending a message\r
                         and calls all the registered functions.\r
  @param  NotifyFunction The function to call when the bus driver\r
                         detects the SlaveAddress and Data pair.\r
\r
  @retval EFI_SUCCESS           NotifyFunction has been registered.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS2_PPI_NOTIFY) (\r
  IN CONST  EFI_PEI_SMBUS2_PPI              *This,\r
  IN CONST  EFI_SMBUS_DEVICE_ADDRESS        SlaveAddress,\r
  IN CONST  UINTN                           Data,\r
  IN CONST  EFI_PEI_SMBUS_NOTIFY2_FUNCTION  NotifyFunction\r
);\r
\r
/**\r
  @par Ppi Description:\r
  Provides the basic I/O interfaces that a PEIM uses to access \r
  its SMBus controller and the slave devices attached to it.\r
\r
  @param Execute\r
  Executes the SMBus operation to an SMBus slave device.\r
\r
  @param ArpDevice\r
  Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)\r
\r
  @param GetArpMap\r
  Allows a PEIM to retrieve the address that was allocated by the SMBus \r
  host controller during enumeration/ARP.\r
\r
  @param Notify\r
  Allows a driver to register for a callback to the SMBus host \r
  controller driver when the bus issues a notification to the bus controller PEIM.\r
\r
  @param Identifier\r
  Identifier which uniquely identifies this SMBus controller in a system.\r
\r
**/\r
struct _EFI_PEI_SMBUS2_PPI {\r
  EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION  Execute;\r
  EFI_PEI_SMBUS2_PPI_ARP_DEVICE         ArpDevice;\r
  EFI_PEI_SMBUS2_PPI_GET_ARP_MAP        GetArpMap;\r
  EFI_PEI_SMBUS2_PPI_NOTIFY             Notify;\r
  EFI_GUID                              Identifier;\r
};\r
\r
extern EFI_GUID gEfiPeiSmbus2PpiGuid;\r
\r
#endif\r
Commit	Line	Data
5879b875	1	/** @file\r
	2	This file declares Smbus2 PPI.\r
	3	\r
	4	Copyright (c) 2006 - 2007, Intel Corporation \r
	5	All rights reserved. This program and the accompanying materials \r
	6	are licensed and made available under the terms and conditions of the BSD License \r
	7	which accompanies this distribution. The full text of the license may be found at \r
	8	http://opensource.org/licenses/bsd-license.php \r
	9	\r
	10	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
	11	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
	12	\r
5879b875	13	@par Revision Reference:\r
	14	This PPI is defined in PI.\r
	15	Version 1.00\r
	16	\r
	17	**/\r
	18	\r
	19	#ifndef _PEI_SMBUS2_PPI_H\r
	20	#define _PEI_SMBUS2_PPI_H\r
	21	\r
	22	#include <IndustryStandard/SmBus.h>\r
	23	\r
	24	#define EFI_PEI_SMBUS2_PPI_GUID \\r
00edb218	25	{ 0x9ca93627, 0xb65b, 0x4324, { 0xa2, 0x2, 0xc0, 0xb4, 0x61, 0x76, 0x45, 0x43 } }\r
5879b875	26	\r
	27	\r
	28	typedef struct _EFI_PEI_SMBUS2_PPI EFI_PEI_SMBUS2_PPI;\r
	29	\r
	30	//\r
	31	// EFI_SMBUS_DEVICE_COMMAND\r
	32	//\r
00edb218	33	typedef UINTN EFI_SMBUS_DEVICE_COMMAND;\r
5879b875	34	\r
	35	\r
	36	/*\r
	37	Executes an SMBus operation to an SMBus controller.\r
	38	\r
00edb218 A	39	@param This A pointer to the EFI_PEI_SMBUS2_PPI instance.\r
	40	@param SlaveAddress The SMBUS hardware address to which the SMBUS device is preassigned or\r
	41	allocated.\r
	42	@param Command This command is transmitted by the SMBus host controller to the SMBus slave \r
	43	device and the interpretation is SMBus slave device specific. \r
	44	It can mean the offset to a list of functions inside \r
	45	an SMBus slave device. Not all operations or slave devices support\r
	46	this command's registers.\r
5879b875	47	\r
00edb218 A	48	@param Operation Signifies which particular SMBus hardware protocol instance that it \r
	49	will use to execute the SMBus transactions. \r
	50	This SMBus hardware protocol is defined by the System Management Bus (SMBus) \r
	51	Specification and is not related to UEFI.\r
5879b875	52	\r
00edb218	53	@param PecCheck Defines if Packet Error Code (PEC) checking is required for this operation.\r
5879b875	54	\r
00edb218 A	55	@param Length Signifies the number of bytes that this operation will do. \r
	56	The maximum number of bytes can be revision specific and operation specific.\r
	57	This parameter will contain the actual number of bytes that are executed\r
	58	for this operation. Not all operations require this argument.\r
5879b875	59	\r
00edb218 A	60	@param Buffer Contains the value of data to execute to the SMBus slave device. \r
	61	Not all operations require this argument. \r
	62	The length of this buffer is identified by Length.\r
5879b875	63	\r
	64	\r
	65	@retval EFI_SUCCESS The last data that was returned from the access\r
	66	matched the poll exit criteria.\r
	67	@retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
	68	@retval EFI_TIMEOUT Timeout expired before the operation was completed.\r
	69	Timeout is determined by the SMBus host controller device.\r
	70	@retval EFI_OUT_OF_RESOURCES The request could not be completed\r
	71	due to a lack of resources.\r
	72	@retval EFI_DEVICE_ERROR The request was not completed because\r
	73	a failure reflected in the Host Status Register bit.\r
	74	@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.\r
	75	Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
	76	EfiSmbusQuickWrite. Length is outside the range of valid values.\r
	77	@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.\r
	78	@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.\r
	79	\r
	80	**/\r
	81	typedef\r
	82	EFI_STATUS\r
	83	(EFIAPI *EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION) (\r
00edb218 A	84	IN CONST EFI_PEI_SMBUS2_PPI *This,\r
	85	IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
	86	IN CONST EFI_SMBUS_DEVICE_COMMAND Command,\r
	87	IN CONST EFI_SMBUS_OPERATION Operation,\r
	88	IN CONST BOOLEAN PecCheck,\r
	89	IN OUT UINTN *Length,\r
	90	IN OUT VOID *Buffer\r
5879b875	91	);\r
5879b875	92	\r
5879b875	93	/**\r
	94	CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.\r
	95	\r
	96	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
	97	@param SlaveAddress The SMBUS hardware address to which the SMBUS\r
	98	device is preassigned or allocated.\r
	99	@param Data Data of the SMBus host notify command that\r
	100	the caller wants to be called.\r
	101	\r
	102	@return Status Code\r
	103	\r
	104	**/\r
	105	typedef\r
	106	EFI_STATUS\r
	107	(EFIAPI *EFI_PEI_SMBUS_NOTIFY2_FUNCTION) (\r
00edb218 A	108	IN CONST EFI_PEI_SMBUS2_PPI *SmbusPpi,\r
	109	IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
	110	IN CONST UINTN Data\r
5879b875	111	);\r
	112	/**\r
	113	The ArpDevice() function enumerates the entire bus or enumerates a specific \r
	114	device that is identified by SmbusUdid. \r
	115	\r
	116	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
	117	@param ArpAll A Boolean expression that indicates if the host drivers need\r
	118	to enumerate all the devices or enumerate only the device that is identified\r
	119	by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.\r
	120	If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
	121	will be at SlaveAddress.\r
	122	@param SmbusUdid The targeted SMBus Unique Device Identifier (UDID).\r
	123	The UDID may not exist for SMBus devices with fixed addresses.\r
	124	@param SlaveAddress The new SMBus address for the slave device for\r
	125	which the operation is targeted.\r
	126	\r
	127	@retval EFI_SUCCESS The SMBus slave device address was set.\r
	128	@retval EFI_INVALID_PARAMETER SlaveAddress is NULL.\r
	129	@retval EFI_OUT_OF_RESOURCES The request could not be completed\r
	130	due to a lack of resources.\r
	131	@retval EFI_TIMEOUT The SMBus slave device did not respond.\r
	132	@retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.\r
	133	\r
	134	**/\r
	135	typedef\r
	136	EFI_STATUS\r
	137	(EFIAPI *EFI_PEI_SMBUS2_PPI_ARP_DEVICE) (\r
00edb218 A	138	IN CONST EFI_PEI_SMBUS2_PPI *This,\r
	139	IN CONST BOOLEAN ArpAll,\r
	140	IN CONST EFI_SMBUS_UDID *SmbusUdid, OPTIONAL\r
	141	IN OUT EFI_SMBUS_DEVICE_ADDRESS *SlaveAddress OPTIONAL\r
5879b875	142	);\r
	143	\r
	144	\r
	145	typedef struct {\r
	146	EFI_SMBUS_DEVICE_ADDRESS SmbusDeviceAddress;\r
	147	EFI_SMBUS_UDID SmbusDeviceUdid;\r
	148	} EFI_SMBUS_DEVICE_MAP;\r
	149	\r
	150	/**\r
	151	The GetArpMap() function returns the mapping of all the SMBus devices \r
	152	that are enumerated by the SMBus host driver. \r
	153	\r
	154	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
	155	@param Length Size of the buffer that contains the SMBus device map.\r
	156	@param SmbusDeviceMap The pointer to the device map as enumerated\r
	157	by the SMBus controller driver.\r
	158	\r
	159	@retval EFI_SUCCESS The device map was returned correctly in the buffer.\r
	160	\r
	161	**/\r
	162	typedef\r
	163	EFI_STATUS\r
	164	(EFIAPI *EFI_PEI_SMBUS2_PPI_GET_ARP_MAP) (\r
00edb218 A	165	IN CONST EFI_PEI_SMBUS2_PPI *This,\r
	166	IN OUT UINTN *Length,\r
	167	IN OUT EFI_SMBUS_DEVICE_MAP **SmbusDeviceMap\r
5879b875	168	);\r
	169	\r
	170	\r
	171	/**\r
	172	The Notify() function registers all the callback functions to allow the \r
	173	bus driver to call these functions when the SlaveAddress/Data pair happens.\r
	174	\r
	175	@param PeiServices A pointer to the system PEI Services Table.\r
	176	@param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
	177	@param SlaveAddress Address that the host controller detects as\r
	178	sending a message and calls all the registered functions.\r
	179	@param Data Data that the host controller detects as sending a message\r
	180	and calls all the registered functions.\r
	181	@param NotifyFunction The function to call when the bus driver\r
	182	detects the SlaveAddress and Data pair.\r
	183	\r
	184	@retval EFI_SUCCESS NotifyFunction has been registered.\r
	185	\r
	186	**/\r
	187	typedef\r
	188	EFI_STATUS\r
	189	(EFIAPI *EFI_PEI_SMBUS2_PPI_NOTIFY) (\r
00edb218 A	190	IN CONST EFI_PEI_SMBUS2_PPI *This,\r
	191	IN CONST EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
	192	IN CONST UINTN Data,\r
	193	IN CONST EFI_PEI_SMBUS_NOTIFY2_FUNCTION NotifyFunction\r
5879b875	194	);\r
	195	\r
	196	/**\r
	197	@par Ppi Description:\r
	198	Provides the basic I/O interfaces that a PEIM uses to access \r
	199	its SMBus controller and the slave devices attached to it.\r
	200	\r
	201	@param Execute\r
	202	Executes the SMBus operation to an SMBus slave device.\r
	203	\r
	204	@param ArpDevice\r
	205	Allows an SMBus 2.0 device(s) to be Address Resolution Protocol (ARP)\r
	206	\r
	207	@param GetArpMap\r
	208	Allows a PEIM to retrieve the address that was allocated by the SMBus \r
	209	host controller during enumeration/ARP.\r
	210	\r
	211	@param Notify\r
	212	Allows a driver to register for a callback to the SMBus host \r
	213	controller driver when the bus issues a notification to the bus controller PEIM.\r
	214	\r
	215	@param Identifier\r
	216	Identifier which uniquely identifies this SMBus controller in a system.\r
	217	\r
	218	**/\r
	219	struct _EFI_PEI_SMBUS2_PPI {\r
00edb218 A	220	EFI_PEI_SMBUS2_PPI_EXECUTE_OPERATION Execute;\r
	221	EFI_PEI_SMBUS2_PPI_ARP_DEVICE ArpDevice;\r
	222	EFI_PEI_SMBUS2_PPI_GET_ARP_MAP GetArpMap;\r
	223	EFI_PEI_SMBUS2_PPI_NOTIFY Notify;\r
	224	EFI_GUID Identifier;\r
5879b875	225	};\r
	226	\r
	227	extern EFI_GUID gEfiPeiSmbus2PpiGuid;\r
	228	\r
	229	#endif\r