Update the copyright notice format

[mirror_edk2.git] / MdePkg / Library / SecPeiDxeTimerLibCpu / IpfTimerLib.c

/** @file\r
  Timer Library functions built upon ITC on IPF.\r
\r
  Copyright (c) 2006 - 2008, Intel Corporation. All rights reserved.<BR>\r
  This program and the accompanying materials\r
  are licensed and made available under the terms and conditions of the BSD License\r
  which accompanies this distribution.  The full text of the license may be found at\r
  http://opensource.org/licenses/bsd-license.php\r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include <Base.h>\r
#include <Library/TimerLib.h>\r
#include <Library/BaseLib.h>\r
#include <Library/PalLib.h>\r
\r
\r
/**\r
  Performs a delay measured as number of ticks.\r
\r
  An internal function to perform a delay measured as number of ticks. It's\r
  invoked by MicroSecondDelay() and NanoSecondDelay().\r
\r
  @param  Delay Number of ticks to delay.\r
\r
**/\r
VOID\r
EFIAPI\r
InternalIpfDelay (\r
  IN      INT64                     Delay\r
  )\r
{\r
  INT64                             Ticks;\r
\r
  //\r
  // The target timer count is calculated here\r
  //\r
  Ticks = (INT64)AsmReadItc () + Delay;\r
\r
  //\r
  // Wait until time out\r
  // Delay > 2^63 could not be handled by this function\r
  // Timer wrap-arounds are handled correctly by this function\r
  //\r
  while (Ticks - (INT64)AsmReadItc() >= 0);\r
}\r
\r
/**\r
  Stalls the CPU for at least the given number of microseconds.\r
\r
  Stalls the CPU for the number of microseconds specified by MicroSeconds.\r
\r
  @param  MicroSeconds  The minimum number of microseconds to delay.\r
\r
  @return The value of MicroSeconds inputted.\r
\r
**/\r
UINTN\r
EFIAPI\r
MicroSecondDelay (\r
  IN      UINTN                     MicroSeconds\r
  )\r
{\r
  InternalIpfDelay (\r
    GetPerformanceCounterProperties (NULL, NULL) *\r
    MicroSeconds /\r
    1000000\r
    );\r
  return MicroSeconds;\r
}\r
\r
/**\r
  Stalls the CPU for at least the given number of nanoseconds.\r
\r
  Stalls the CPU for the number of nanoseconds specified by NanoSeconds.\r
\r
  @param  NanoSeconds The minimum number of nanoseconds to delay.\r
\r
  @return The value of NanoSeconds inputted.\r
\r
**/\r
UINTN\r
EFIAPI\r
NanoSecondDelay (\r
  IN      UINTN                     NanoSeconds\r
  )\r
{\r
  InternalIpfDelay (\r
    GetPerformanceCounterProperties (NULL, NULL) *\r
    NanoSeconds /\r
    1000000000\r
    );\r
  return NanoSeconds;\r
}\r
\r
/**\r
  Retrieves the current value of a 64-bit free running performance counter.\r
\r
  The counter can either count up by 1 or count down by 1. If the physical\r
  performance counter counts by a larger increment, then the counter values\r
  must be translated. The properties of the counter can be retrieved from\r
  GetPerformanceCounterProperties().\r
\r
  @return The current value of the free running performance counter.\r
\r
**/\r
UINT64\r
EFIAPI\r
GetPerformanceCounter (\r
  VOID\r
  )\r
{\r
  return AsmReadItc ();\r
}\r
\r
/**\r
  Retrieves the 64-bit frequency in Hz and the range of performance counter\r
  values.\r
\r
  If StartValue is not NULL, then the value that the performance counter starts\r
  with immediately after is it rolls over is returned in StartValue. If\r
  EndValue is not NULL, then the value that the performance counter end with\r
  immediately before it rolls over is returned in EndValue. The 64-bit\r
  frequency of the performance counter in Hz is always returned. If StartValue\r
  is less than EndValue, then the performance counter counts up. If StartValue\r
  is greater than EndValue, then the performance counter counts down. For\r
  example, a 64-bit free running counter that counts up would have a StartValue\r
  of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter\r
  that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.\r
\r
  @param  StartValue  The value the performance counter starts with when it\r
                      rolls over.\r
  @param  EndValue    The value that the performance counter ends with before\r
                      it rolls over.\r
\r
  @return The frequency in Hz.\r
\r
**/\r
UINT64\r
EFIAPI\r
GetPerformanceCounterProperties (\r
  OUT      UINT64                    *StartValue,  OPTIONAL\r
  OUT      UINT64                    *EndValue     OPTIONAL\r
  )\r
{\r
  PAL_CALL_RETURN                   PalRet;\r
  UINT64                            BaseFrequence;\r
\r
  if (StartValue != NULL) {\r
    *StartValue = 0;\r
  }\r
\r
  if (EndValue != NULL) {\r
    *EndValue = (UINT64)(-1);\r
  }\r
\r
  PalRet = PalCall (PAL_FREQ_BASE, 0, 0, 0);\r
  if (PalRet.Status != 0) {\r
    return 1000000;\r
  }\r
  BaseFrequence = PalRet.r9;\r
\r
  PalRet = PalCall (PAL_FREQ_RATIOS, 0, 0, 0);\r
  if (PalRet.Status != 0) {\r
    return 1000000;\r
  }\r
\r
  return BaseFrequence * (PalRet.r11 >> 32) / (UINT32)PalRet.r11;\r
}\r