UefiCpuPkg/PiSmmCpu: Fixed #double fault on #page fault.

[mirror_edk2.git] / UefiCpuPkg / PiSmmCpuDxeSmm / Ia32 / SmmFuncsArch.c

/** @file\r
  SMM CPU misc functions for Ia32 arch specific.\r
  \r
Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include "PiSmmCpuDxeSmm.h"\r
\r
extern UINT64 gTaskGateDescriptor;\r
\r
EFI_PHYSICAL_ADDRESS                mGdtBuffer;\r
UINTN                               mGdtBufferSize;\r
\r
/**\r
  Initialize IDT for SMM Stack Guard.\r
\r
**/\r
VOID\r
EFIAPI\r
InitializeIDTSmmStackGuard (\r
  VOID\r
  )\r
{\r
  IA32_IDT_GATE_DESCRIPTOR  *IdtGate;\r
\r
  //\r
  // If SMM Stack Guard feature is enabled, the Page Fault Exception entry in IDT\r
  // is a Task Gate Descriptor so that when a Page Fault Exception occurs,\r
  // the processors can use a known good stack in case stack is ran out.\r
  //\r
  IdtGate = (IA32_IDT_GATE_DESCRIPTOR *)gcSmiIdtr.Base;\r
  IdtGate += EXCEPT_IA32_PAGE_FAULT;\r
  IdtGate->Uint64 = gTaskGateDescriptor;\r
}\r
\r
/**\r
  Initialize Gdt for all processors.\r
  \r
  @param[in]   Cr3          CR3 value.\r
  @param[out]  GdtStepSize  The step size for GDT table.\r
\r
  @return GdtBase for processor 0.\r
          GdtBase for processor X is: GdtBase + (GdtStepSize * X)\r
**/\r
VOID *\r
InitGdt (\r
  IN  UINTN  Cr3,\r
  OUT UINTN  *GdtStepSize\r
  )\r
{\r
  UINTN                     Index;\r
  IA32_SEGMENT_DESCRIPTOR   *GdtDescriptor;\r
  UINTN                     TssBase;\r
  UINTN                     GdtTssTableSize;\r
  UINT8                     *GdtTssTables;\r
  UINTN                     GdtTableStepSize;\r
\r
  if (FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    //\r
    // For IA32 SMM, if SMM Stack Guard feature is enabled, we use 2 TSS.\r
    // in this case, we allocate separate GDT/TSS for each CPUs to avoid TSS load contention\r
    // on each SMI entry.\r
    //\r
\r
    //\r
    // Enlarge GDT to contain 2 TSS descriptors\r
    //\r
    gcSmiGdtr.Limit += (UINT16)(2 * sizeof (IA32_SEGMENT_DESCRIPTOR));\r
\r
    GdtTssTableSize = (gcSmiGdtr.Limit + 1 + TSS_SIZE * 2 + 7) & ~7; // 8 bytes aligned\r
    mGdtBufferSize = GdtTssTableSize * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
    GdtTssTables = (UINT8*)AllocateCodePages (EFI_SIZE_TO_PAGES (mGdtBufferSize));\r
    ASSERT (GdtTssTables != NULL);\r
    mGdtBuffer = (UINTN)GdtTssTables;\r
    GdtTableStepSize = GdtTssTableSize;\r
\r
    for (Index = 0; Index < gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus; Index++) {\r
      CopyMem (GdtTssTables + GdtTableStepSize * Index, (VOID*)(UINTN)gcSmiGdtr.Base, gcSmiGdtr.Limit + 1 + TSS_SIZE * 2);\r
      //\r
      // Fixup TSS descriptors\r
      //\r
      TssBase = (UINTN)(GdtTssTables + GdtTableStepSize * Index + gcSmiGdtr.Limit + 1);\r
      GdtDescriptor = (IA32_SEGMENT_DESCRIPTOR *)(TssBase) - 2;\r
      GdtDescriptor->Bits.BaseLow = (UINT16)TssBase;\r
      GdtDescriptor->Bits.BaseMid = (UINT8)(TssBase >> 16);\r
      GdtDescriptor->Bits.BaseHigh = (UINT8)(TssBase >> 24);\r
\r
      TssBase += TSS_SIZE;\r
      GdtDescriptor++;\r
      GdtDescriptor->Bits.BaseLow = (UINT16)TssBase;\r
      GdtDescriptor->Bits.BaseMid = (UINT8)(TssBase >> 16);\r
      GdtDescriptor->Bits.BaseHigh = (UINT8)(TssBase >> 24);\r
      //\r
      // Fixup TSS segments\r
      //\r
      // ESP as known good stack\r
      //\r
      *(UINTN *)(TssBase + TSS_IA32_ESP_OFFSET) =  mSmmStackArrayBase + EFI_PAGE_SIZE + Index * mSmmStackSize;\r
      *(UINT32 *)(TssBase + TSS_IA32_CR3_OFFSET) = Cr3;\r
    }\r
  } else {\r
    //\r
    // Just use original table, AllocatePage and copy them here to make sure GDTs are covered in page memory.\r
    //\r
    GdtTssTableSize = gcSmiGdtr.Limit + 1;\r
    mGdtBufferSize = GdtTssTableSize * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
    GdtTssTables = (UINT8*)AllocateCodePages (EFI_SIZE_TO_PAGES (mGdtBufferSize));\r
    ASSERT (GdtTssTables != NULL);\r
    mGdtBuffer = (UINTN)GdtTssTables;\r
    GdtTableStepSize = GdtTssTableSize;\r
\r
    for (Index = 0; Index < gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus; Index++) {\r
      CopyMem (GdtTssTables + GdtTableStepSize * Index, (VOID*)(UINTN)gcSmiGdtr.Base, gcSmiGdtr.Limit + 1);\r
    }\r
  }\r
\r
  *GdtStepSize = GdtTableStepSize;\r
  return GdtTssTables;\r
}\r
\r
/**\r
  This function sets GDT/IDT buffer to be RO and XP.\r
**/\r
VOID\r
PatchGdtIdtMap (\r
  VOID\r
  )\r
{\r
  EFI_PHYSICAL_ADDRESS       BaseAddress;\r
  UINTN                      Size;\r
\r
  //\r
  // GDT\r
  //\r
  DEBUG ((DEBUG_INFO, "PatchGdtIdtMap - GDT:\n"));\r
\r
  BaseAddress = mGdtBuffer;\r
  Size = ALIGN_VALUE(mGdtBufferSize, SIZE_4KB);\r
  if (!FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    //\r
    // Do not set RO for IA32 when stack guard feature is enabled.\r
    // Stack Guard need use task switch to switch stack.\r
    // It need write GDT and TSS.\r
    //\r
    SmmSetMemoryAttributes (\r
      BaseAddress,\r
      Size,\r
      EFI_MEMORY_RO\r
      );\r
  }\r
  SmmSetMemoryAttributes (\r
    BaseAddress,\r
    Size,\r
    EFI_MEMORY_XP\r
    );\r
\r
  //\r
  // IDT\r
  //\r
  DEBUG ((DEBUG_INFO, "PatchGdtIdtMap - IDT:\n"));\r
\r
  BaseAddress = gcSmiIdtr.Base;\r
  Size = ALIGN_VALUE(gcSmiIdtr.Limit + 1, SIZE_4KB);\r
  SmmSetMemoryAttributes (\r
    BaseAddress,\r
    Size,\r
    EFI_MEMORY_RO\r
    );\r
  SmmSetMemoryAttributes (\r
    BaseAddress,\r
    Size,\r
    EFI_MEMORY_XP\r
    );\r
}\r
\r
/**\r
  Transfer AP to safe hlt-loop after it finished restore CPU features on S3 patch.\r
\r
  @param[in] ApHltLoopCode          The address of the safe hlt-loop function.\r
  @param[in] TopOfStack             A pointer to the new stack to use for the ApHltLoopCode.\r
  @param[in] NumberToFinishAddress  Address of Semaphore of APs finish count.\r
\r
**/\r
VOID\r
TransferApToSafeState (\r
  IN UINTN  ApHltLoopCode,\r
  IN UINTN  TopOfStack,\r
  IN UINTN  NumberToFinishAddress\r
  )\r
{\r
  SwitchStack (\r
    (SWITCH_STACK_ENTRY_POINT)ApHltLoopCode,\r
    (VOID *)NumberToFinishAddress,\r
    NULL,\r
    (VOID *)TopOfStack\r
    );\r
  //\r
  // It should never reach here\r
  //\r
  ASSERT (FALSE);\r
}\r