UefiCpuPkg/PiSmmCpuDxeSmm: Enable MM MP Protocol

[mirror_edk2.git] / UefiCpuPkg / PiSmmCpuDxeSmm / MpService.c

/** @file\r
SMM MP service implementation\r
\r
Copyright (c) 2009 - 2019, Intel Corporation. All rights reserved.<BR>\r
Copyright (c) 2017, AMD Incorporated. All rights reserved.<BR>\r
\r
SPDX-License-Identifier: BSD-2-Clause-Patent\r
\r
**/\r
\r
#include "PiSmmCpuDxeSmm.h"\r
\r
//\r
// Slots for all MTRR( FIXED MTRR + VARIABLE MTRR + MTRR_LIB_IA32_MTRR_DEF_TYPE)\r
//\r
MTRR_SETTINGS                               gSmiMtrrs;\r
UINT64                                      gPhyMask;\r
SMM_DISPATCHER_MP_SYNC_DATA                 *mSmmMpSyncData = NULL;\r
UINTN                                       mSmmMpSyncDataSize;\r
SMM_CPU_SEMAPHORES                          mSmmCpuSemaphores;\r
UINTN                                       mSemaphoreSize;\r
SPIN_LOCK                                   *mPFLock = NULL;\r
SMM_CPU_SYNC_MODE                           mCpuSmmSyncMode;\r
BOOLEAN                                     mMachineCheckSupported = FALSE;\r
\r
/**\r
  Performs an atomic compare exchange operation to get semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: original integer - 1\r
  @return     Original integer - 1\r
\r
**/\r
UINT32\r
WaitForSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (Value == 0 ||\r
           InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value,\r
             Value - 1\r
             ) != Value);\r
  return Value - 1;\r
}\r
\r
\r
/**\r
  Performs an atomic compare exchange operation to release semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: original integer + 1\r
  @return     Original integer + 1\r
\r
**/\r
UINT32\r
ReleaseSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (Value + 1 != 0 &&\r
           InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value,\r
             Value + 1\r
             ) != Value);\r
  return Value + 1;\r
}\r
\r
/**\r
  Performs an atomic compare exchange operation to lock semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: -1\r
  @return     Original integer\r
\r
**/\r
UINT32\r
LockdownSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value, (UINT32)-1\r
             ) != Value);\r
  return Value;\r
}\r
\r
/**\r
  Wait all APs to performs an atomic compare exchange operation to release semaphore.\r
\r
  @param   NumberOfAPs      AP number\r
\r
**/\r
VOID\r
WaitForAllAPs (\r
  IN      UINTN                     NumberOfAPs\r
  )\r
{\r
  UINTN                             BspIndex;\r
\r
  BspIndex = mSmmMpSyncData->BspIndex;\r
  while (NumberOfAPs-- > 0) {\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
}\r
\r
/**\r
  Performs an atomic compare exchange operation to release semaphore\r
  for each AP.\r
\r
**/\r
VOID\r
ReleaseAllAPs (\r
  VOID\r
  )\r
{\r
  UINTN                             Index;\r
\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (IsPresentAp (Index)) {\r
      ReleaseSemaphore (mSmmMpSyncData->CpuData[Index].Run);\r
    }\r
  }\r
}\r
\r
/**\r
  Checks if all CPUs (with certain exceptions) have checked in for this SMI run\r
\r
  @param   Exceptions     CPU Arrival exception flags.\r
\r
  @retval   TRUE  if all CPUs the have checked in.\r
  @retval   FALSE  if at least one Normal AP hasn't checked in.\r
\r
**/\r
BOOLEAN\r
AllCpusInSmmWithExceptions (\r
  SMM_CPU_ARRIVAL_EXCEPTIONS  Exceptions\r
  )\r
{\r
  UINTN                             Index;\r
  SMM_CPU_DATA_BLOCK                *CpuData;\r
  EFI_PROCESSOR_INFORMATION         *ProcessorInfo;\r
\r
  ASSERT (*mSmmMpSyncData->Counter <= mNumberOfCpus);\r
\r
  if (*mSmmMpSyncData->Counter == mNumberOfCpus) {\r
    return TRUE;\r
  }\r
\r
  CpuData = mSmmMpSyncData->CpuData;\r
  ProcessorInfo = gSmmCpuPrivate->ProcessorInfo;\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (!(*(CpuData[Index].Present)) && ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {\r
      if (((Exceptions & ARRIVAL_EXCEPTION_DELAYED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmDelayed) != 0) {\r
        continue;\r
      }\r
      if (((Exceptions & ARRIVAL_EXCEPTION_BLOCKED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmBlocked) != 0) {\r
        continue;\r
      }\r
      if (((Exceptions & ARRIVAL_EXCEPTION_SMI_DISABLED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmEnable) != 0) {\r
        continue;\r
      }\r
      return FALSE;\r
    }\r
  }\r
\r
\r
  return TRUE;\r
}\r
\r
/**\r
  Has OS enabled Lmce in the MSR_IA32_MCG_EXT_CTL\r
\r
  @retval TRUE     Os enable lmce.\r
  @retval FALSE    Os not enable lmce.\r
\r
**/\r
BOOLEAN\r
IsLmceOsEnabled (\r
  VOID\r
  )\r
{\r
  MSR_IA32_MCG_CAP_REGISTER          McgCap;\r
  MSR_IA32_FEATURE_CONTROL_REGISTER  FeatureCtrl;\r
  MSR_IA32_MCG_EXT_CTL_REGISTER      McgExtCtrl;\r
\r
  McgCap.Uint64 = AsmReadMsr64 (MSR_IA32_MCG_CAP);\r
  if (McgCap.Bits.MCG_LMCE_P == 0) {\r
    return FALSE;\r
  }\r
\r
  FeatureCtrl.Uint64 = AsmReadMsr64 (MSR_IA32_FEATURE_CONTROL);\r
  if (FeatureCtrl.Bits.LmceOn == 0) {\r
    return FALSE;\r
  }\r
\r
  McgExtCtrl.Uint64 = AsmReadMsr64 (MSR_IA32_MCG_EXT_CTL);\r
  return (BOOLEAN) (McgExtCtrl.Bits.LMCE_EN == 1);\r
}\r
\r
/**\r
  Return if Local machine check exception signaled.\r
\r
  Indicates (when set) that a local machine check exception was generated. This indicates that the current machine-check event was\r
  delivered to only the logical processor.\r
\r
  @retval TRUE    LMCE was signaled.\r
  @retval FALSE   LMCE was not signaled.\r
\r
**/\r
BOOLEAN\r
IsLmceSignaled (\r
  VOID\r
  )\r
{\r
  MSR_IA32_MCG_STATUS_REGISTER McgStatus;\r
\r
  McgStatus.Uint64 = AsmReadMsr64 (MSR_IA32_MCG_STATUS);\r
  return (BOOLEAN) (McgStatus.Bits.LMCE_S == 1);\r
}\r
\r
/**\r
  Given timeout constraint, wait for all APs to arrive, and insure when this function returns, no AP will execute normal mode code before\r
  entering SMM, except SMI disabled APs.\r
\r
**/\r
VOID\r
SmmWaitForApArrival (\r
  VOID\r
  )\r
{\r
  UINT64                            Timer;\r
  UINTN                             Index;\r
  BOOLEAN                           LmceEn;\r
  BOOLEAN                           LmceSignal;\r
\r
  ASSERT (*mSmmMpSyncData->Counter <= mNumberOfCpus);\r
\r
  LmceEn     = FALSE;\r
  LmceSignal = FALSE;\r
  if (mMachineCheckSupported) {\r
    LmceEn     = IsLmceOsEnabled ();\r
    LmceSignal = IsLmceSignaled();\r
  }\r
\r
  //\r
  // Platform implementor should choose a timeout value appropriately:\r
  // - The timeout value should balance the SMM time constrains and the likelihood that delayed CPUs are excluded in the SMM run. Note\r
  //   the SMI Handlers must ALWAYS take into account the cases that not all APs are available in an SMI run.\r
  // - The timeout value must, in the case of 2nd timeout, be at least long enough to give time for all APs to receive the SMI IPI\r
  //   and either enter SMM or buffer the SMI, to insure there is no CPU running normal mode code when SMI handling starts. This will\r
  //   be TRUE even if a blocked CPU is brought out of the blocked state by a normal mode CPU (before the normal mode CPU received the\r
  //   SMI IPI), because with a buffered SMI, and CPU will enter SMM immediately after it is brought out of the blocked state.\r
  // - The timeout value must be longer than longest possible IO operation in the system\r
  //\r
\r
  //\r
  // Sync with APs 1st timeout\r
  //\r
  for (Timer = StartSyncTimer ();\r
       !IsSyncTimerTimeout (Timer) && !(LmceEn && LmceSignal) &&\r
       !AllCpusInSmmWithExceptions (ARRIVAL_EXCEPTION_BLOCKED | ARRIVAL_EXCEPTION_SMI_DISABLED );\r
       ) {\r
    CpuPause ();\r
  }\r
\r
  //\r
  // Not all APs have arrived, so we need 2nd round of timeout. IPIs should be sent to ALL none present APs,\r
  // because:\r
  // a) Delayed AP may have just come out of the delayed state. Blocked AP may have just been brought out of blocked state by some AP running\r
  //    normal mode code. These APs need to be guaranteed to have an SMI pending to insure that once they are out of delayed / blocked state, they\r
  //    enter SMI immediately without executing instructions in normal mode. Note traditional flow requires there are no APs doing normal mode\r
  //    work while SMI handling is on-going.\r
  // b) As a consequence of SMI IPI sending, (spurious) SMI may occur after this SMM run.\r
  // c) ** NOTE **: Use SMI disabling feature VERY CAREFULLY (if at all) for traditional flow, because a processor in SMI-disabled state\r
  //    will execute normal mode code, which breaks the traditional SMI handlers' assumption that no APs are doing normal\r
  //    mode work while SMI handling is on-going.\r
  // d) We don't add code to check SMI disabling status to skip sending IPI to SMI disabled APs, because:\r
  //    - In traditional flow, SMI disabling is discouraged.\r
  //    - In relaxed flow, CheckApArrival() will check SMI disabling status before calling this function.\r
  //    In both cases, adding SMI-disabling checking code increases overhead.\r
  //\r
  if (*mSmmMpSyncData->Counter < mNumberOfCpus) {\r
    //\r
    // Send SMI IPIs to bring outside processors in\r
    //\r
    for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
      if (!(*(mSmmMpSyncData->CpuData[Index].Present)) && gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {\r
        SendSmiIpi ((UINT32)gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId);\r
      }\r
    }\r
\r
    //\r
    // Sync with APs 2nd timeout.\r
    //\r
    for (Timer = StartSyncTimer ();\r
         !IsSyncTimerTimeout (Timer) &&\r
         !AllCpusInSmmWithExceptions (ARRIVAL_EXCEPTION_BLOCKED | ARRIVAL_EXCEPTION_SMI_DISABLED );\r
         ) {\r
      CpuPause ();\r
    }\r
  }\r
\r
  return;\r
}\r
\r
\r
/**\r
  Replace OS MTRR's with SMI MTRR's.\r
\r
  @param    CpuIndex             Processor Index\r
\r
**/\r
VOID\r
ReplaceOSMtrrs (\r
  IN      UINTN                     CpuIndex\r
  )\r
{\r
  SmmCpuFeaturesDisableSmrr ();\r
\r
  //\r
  // Replace all MTRRs registers\r
  //\r
  MtrrSetAllMtrrs (&gSmiMtrrs);\r
}\r
\r
/**\r
  Wheck whether task has been finished by all APs.\r
\r
  @param       BlockMode   Whether did it in block mode or non-block mode.\r
\r
  @retval      TRUE        Task has been finished by all APs.\r
  @retval      FALSE       Task not has been finished by all APs.\r
\r
**/\r
BOOLEAN\r
WaitForAllAPsNotBusy (\r
  IN BOOLEAN                        BlockMode\r
  )\r
{\r
  UINTN                             Index;\r
\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    //\r
    // Ignore BSP and APs which not call in SMM.\r
    //\r
    if (!IsPresentAp(Index)) {\r
      continue;\r
    }\r
\r
    if (BlockMode) {\r
      AcquireSpinLock(mSmmMpSyncData->CpuData[Index].Busy);\r
      ReleaseSpinLock(mSmmMpSyncData->CpuData[Index].Busy);\r
    } else {\r
      if (AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[Index].Busy)) {\r
        ReleaseSpinLock(mSmmMpSyncData->CpuData[Index].Busy);\r
      } else {\r
        return FALSE;\r
      }\r
    }\r
  }\r
\r
  return TRUE;\r
}\r
\r
/**\r
  Check whether it is an present AP.\r
\r
  @param   CpuIndex      The AP index which calls this function.\r
\r
  @retval  TRUE           It's a present AP.\r
  @retval  TRUE           This is not an AP or it is not present.\r
\r
**/\r
BOOLEAN\r
IsPresentAp (\r
  IN UINTN        CpuIndex\r
  )\r
{\r
  return ((CpuIndex != gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) &&\r
    *(mSmmMpSyncData->CpuData[CpuIndex].Present));\r
}\r
\r
/**\r
  Check whether execute in single AP or all APs.\r
\r
  Compare two Tokens used by different APs to know whether in StartAllAps call.\r
\r
  Whether is an valid AP base on AP's Present flag.\r
\r
  @retval  TRUE      IN StartAllAps call.\r
  @retval  FALSE     Not in StartAllAps call.\r
\r
**/\r
BOOLEAN\r
InStartAllApsCall (\r
  VOID\r
  )\r
{\r
  UINTN      ApIndex;\r
  UINTN      ApIndex2;\r
\r
  for (ApIndex = mMaxNumberOfCpus; ApIndex-- > 0;) {\r
    if (IsPresentAp (ApIndex) && (mSmmMpSyncData->CpuData[ApIndex].Token != NULL)) {\r
      for (ApIndex2 = ApIndex; ApIndex2-- > 0;) {\r
        if (IsPresentAp (ApIndex2) && (mSmmMpSyncData->CpuData[ApIndex2].Token != NULL)) {\r
          return mSmmMpSyncData->CpuData[ApIndex2].Token == mSmmMpSyncData->CpuData[ApIndex].Token;\r
        }\r
      }\r
    }\r
  }\r
\r
  return FALSE;\r
}\r
\r
/**\r
  Clean up the status flags used during executing the procedure.\r
\r
  @param   CpuIndex      The AP index which calls this function.\r
\r
**/\r
VOID\r
ReleaseToken (\r
  IN UINTN                  CpuIndex\r
  )\r
{\r
  UINTN                             Index;\r
  BOOLEAN                           Released;\r
\r
  if (InStartAllApsCall ()) {\r
    //\r
    // In Start All APs mode, make sure all APs have finished task.\r
    //\r
    if (WaitForAllAPsNotBusy (FALSE)) {\r
      //\r
      // Clean the flags update in the function call.\r
      //\r
      Released = FALSE;\r
      for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
        //\r
        // Only In SMM APs need to be clean up.\r
        //\r
        if (mSmmMpSyncData->CpuData[Index].Present && mSmmMpSyncData->CpuData[Index].Token != NULL) {\r
          if (!Released) {\r
            ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Token);\r
            Released = TRUE;\r
          }\r
          mSmmMpSyncData->CpuData[Index].Token = NULL;\r
        }\r
      }\r
    }\r
  } else {\r
    //\r
    // In single AP mode.\r
    //\r
    if (mSmmMpSyncData->CpuData[CpuIndex].Token != NULL) {\r
      ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Token);\r
      mSmmMpSyncData->CpuData[CpuIndex].Token = NULL;\r
    }\r
  }\r
}\r
\r
/**\r
  Free the tokens in the maintained list.\r
\r
**/\r
VOID\r
FreeTokens (\r
  VOID\r
  )\r
{\r
  LIST_ENTRY            *Link;\r
  PROCEDURE_TOKEN       *ProcToken;\r
\r
  while (!IsListEmpty (&gSmmCpuPrivate->TokenList)) {\r
    Link = GetFirstNode (&gSmmCpuPrivate->TokenList);\r
    ProcToken = PROCEDURE_TOKEN_FROM_LINK (Link);\r
\r
    RemoveEntryList (&ProcToken->Link);\r
\r
    FreePool ((VOID *)ProcToken->ProcedureToken);\r
    FreePool (ProcToken);\r
  }\r
}\r
\r
/**\r
  SMI handler for BSP.\r
\r
  @param     CpuIndex         BSP processor Index\r
  @param     SyncMode         SMM MP sync mode\r
\r
**/\r
VOID\r
BSPHandler (\r
  IN      UINTN                     CpuIndex,\r
  IN      SMM_CPU_SYNC_MODE         SyncMode\r
  )\r
{\r
  UINTN                             Index;\r
  MTRR_SETTINGS                     Mtrrs;\r
  UINTN                             ApCount;\r
  BOOLEAN                           ClearTopLevelSmiResult;\r
  UINTN                             PresentCount;\r
\r
  ASSERT (CpuIndex == mSmmMpSyncData->BspIndex);\r
  ApCount = 0;\r
\r
  //\r
  // Flag BSP's presence\r
  //\r
  *mSmmMpSyncData->InsideSmm = TRUE;\r
\r
  //\r
  // Initialize Debug Agent to start source level debug in BSP handler\r
  //\r
  InitializeDebugAgent (DEBUG_AGENT_INIT_ENTER_SMI, NULL, NULL);\r
\r
  //\r
  // Mark this processor's presence\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = TRUE;\r
\r
  //\r
  // Clear platform top level SMI status bit before calling SMI handlers. If\r
  // we cleared it after SMI handlers are run, we would miss the SMI that\r
  // occurs after SMI handlers are done and before SMI status bit is cleared.\r
  //\r
  ClearTopLevelSmiResult = ClearTopLevelSmiStatus();\r
  ASSERT (ClearTopLevelSmiResult == TRUE);\r
\r
  //\r
  // Set running processor index\r
  //\r
  gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu = CpuIndex;\r
\r
  //\r
  // If Traditional Sync Mode or need to configure MTRRs: gather all available APs.\r
  //\r
  if (SyncMode == SmmCpuSyncModeTradition || SmmCpuFeaturesNeedConfigureMtrrs()) {\r
\r
    //\r
    // Wait for APs to arrive\r
    //\r
    SmmWaitForApArrival();\r
\r
    //\r
    // Lock the counter down and retrieve the number of APs\r
    //\r
    *mSmmMpSyncData->AllCpusInSync = TRUE;\r
    ApCount = LockdownSemaphore (mSmmMpSyncData->Counter) - 1;\r
\r
    //\r
    // Wait for all APs to get ready for programming MTRRs\r
    //\r
    WaitForAllAPs (ApCount);\r
\r
    if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
      //\r
      // Signal all APs it's time for backup MTRRs\r
      //\r
      ReleaseAllAPs ();\r
\r
      //\r
      // WaitForSemaphore() may wait for ever if an AP happens to enter SMM at\r
      // exactly this point. Please make sure PcdCpuSmmMaxSyncLoops has been set\r
      // to a large enough value to avoid this situation.\r
      // Note: For HT capable CPUs, threads within a core share the same set of MTRRs.\r
      // We do the backup first and then set MTRR to avoid race condition for threads\r
      // in the same core.\r
      //\r
      MtrrGetAllMtrrs(&Mtrrs);\r
\r
      //\r
      // Wait for all APs to complete their MTRR saving\r
      //\r
      WaitForAllAPs (ApCount);\r
\r
      //\r
      // Let all processors program SMM MTRRs together\r
      //\r
      ReleaseAllAPs ();\r
\r
      //\r
      // WaitForSemaphore() may wait for ever if an AP happens to enter SMM at\r
      // exactly this point. Please make sure PcdCpuSmmMaxSyncLoops has been set\r
      // to a large enough value to avoid this situation.\r
      //\r
      ReplaceOSMtrrs (CpuIndex);\r
\r
      //\r
      // Wait for all APs to complete their MTRR programming\r
      //\r
      WaitForAllAPs (ApCount);\r
    }\r
  }\r
\r
  //\r
  // The BUSY lock is initialized to Acquired state\r
  //\r
  AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
\r
  //\r
  // Perform the pre tasks\r
  //\r
  PerformPreTasks ();\r
\r
  //\r
  // Invoke SMM Foundation EntryPoint with the processor information context.\r
  //\r
  gSmmCpuPrivate->SmmCoreEntry (&gSmmCpuPrivate->SmmCoreEntryContext);\r
\r
  //\r
  // Make sure all APs have completed their pending none-block tasks\r
  //\r
  WaitForAllAPsNotBusy (TRUE);\r
\r
  //\r
  // Perform the remaining tasks\r
  //\r
  PerformRemainingTasks ();\r
\r
  //\r
  // If Relaxed-AP Sync Mode: gather all available APs after BSP SMM handlers are done, and\r
  // make those APs to exit SMI synchronously. APs which arrive later will be excluded and\r
  // will run through freely.\r
  //\r
  if (SyncMode != SmmCpuSyncModeTradition && !SmmCpuFeaturesNeedConfigureMtrrs()) {\r
\r
    //\r
    // Lock the counter down and retrieve the number of APs\r
    //\r
    *mSmmMpSyncData->AllCpusInSync = TRUE;\r
    ApCount = LockdownSemaphore (mSmmMpSyncData->Counter) - 1;\r
    //\r
    // Make sure all APs have their Present flag set\r
    //\r
    while (TRUE) {\r
      PresentCount = 0;\r
      for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
        if (*(mSmmMpSyncData->CpuData[Index].Present)) {\r
          PresentCount ++;\r
        }\r
      }\r
      if (PresentCount > ApCount) {\r
        break;\r
      }\r
    }\r
  }\r
\r
  //\r
  // Notify all APs to exit\r
  //\r
  *mSmmMpSyncData->InsideSmm = FALSE;\r
  ReleaseAllAPs ();\r
\r
  //\r
  // Wait for all APs to complete their pending tasks\r
  //\r
  WaitForAllAPs (ApCount);\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Signal APs to restore MTRRs\r
    //\r
    ReleaseAllAPs ();\r
\r
    //\r
    // Restore OS MTRRs\r
    //\r
    SmmCpuFeaturesReenableSmrr ();\r
    MtrrSetAllMtrrs(&Mtrrs);\r
\r
    //\r
    // Wait for all APs to complete MTRR programming\r
    //\r
    WaitForAllAPs (ApCount);\r
  }\r
\r
  //\r
  // Stop source level debug in BSP handler, the code below will not be\r
  // debugged.\r
  //\r
  InitializeDebugAgent (DEBUG_AGENT_INIT_EXIT_SMI, NULL, NULL);\r
\r
  //\r
  // Signal APs to Reset states/semaphore for this processor\r
  //\r
  ReleaseAllAPs ();\r
\r
  //\r
  // Perform pending operations for hot-plug\r
  //\r
  SmmCpuUpdate ();\r
\r
  //\r
  // Clear the Present flag of BSP\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = FALSE;\r
\r
  //\r
  // Gather APs to exit SMM synchronously. Note the Present flag is cleared by now but\r
  // WaitForAllAps does not depend on the Present flag.\r
  //\r
  WaitForAllAPs (ApCount);\r
\r
  //\r
  // Clean the tokens buffer.\r
  //\r
  FreeTokens ();\r
\r
  //\r
  // Reset BspIndex to -1, meaning BSP has not been elected.\r
  //\r
  if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
    mSmmMpSyncData->BspIndex = (UINT32)-1;\r
  }\r
\r
  //\r
  // Allow APs to check in from this point on\r
  //\r
  *mSmmMpSyncData->Counter = 0;\r
  *mSmmMpSyncData->AllCpusInSync = FALSE;\r
}\r
\r
/**\r
  SMI handler for AP.\r
\r
  @param     CpuIndex         AP processor Index.\r
  @param     ValidSmi         Indicates that current SMI is a valid SMI or not.\r
  @param     SyncMode         SMM MP sync mode.\r
\r
**/\r
VOID\r
APHandler (\r
  IN      UINTN                     CpuIndex,\r
  IN      BOOLEAN                   ValidSmi,\r
  IN      SMM_CPU_SYNC_MODE         SyncMode\r
  )\r
{\r
  UINT64                            Timer;\r
  UINTN                             BspIndex;\r
  MTRR_SETTINGS                     Mtrrs;\r
  EFI_STATUS                        ProcedureStatus;\r
\r
  //\r
  // Timeout BSP\r
  //\r
  for (Timer = StartSyncTimer ();\r
       !IsSyncTimerTimeout (Timer) &&\r
       !(*mSmmMpSyncData->InsideSmm);\r
       ) {\r
    CpuPause ();\r
  }\r
\r
  if (!(*mSmmMpSyncData->InsideSmm)) {\r
    //\r
    // BSP timeout in the first round\r
    //\r
    if (mSmmMpSyncData->BspIndex != -1) {\r
      //\r
      // BSP Index is known\r
      //\r
      BspIndex = mSmmMpSyncData->BspIndex;\r
      ASSERT (CpuIndex != BspIndex);\r
\r
      //\r
      // Send SMI IPI to bring BSP in\r
      //\r
      SendSmiIpi ((UINT32)gSmmCpuPrivate->ProcessorInfo[BspIndex].ProcessorId);\r
\r
      //\r
      // Now clock BSP for the 2nd time\r
      //\r
      for (Timer = StartSyncTimer ();\r
           !IsSyncTimerTimeout (Timer) &&\r
           !(*mSmmMpSyncData->InsideSmm);\r
           ) {\r
        CpuPause ();\r
      }\r
\r
      if (!(*mSmmMpSyncData->InsideSmm)) {\r
        //\r
        // Give up since BSP is unable to enter SMM\r
        // and signal the completion of this AP\r
        WaitForSemaphore (mSmmMpSyncData->Counter);\r
        return;\r
      }\r
    } else {\r
      //\r
      // Don't know BSP index. Give up without sending IPI to BSP.\r
      //\r
      WaitForSemaphore (mSmmMpSyncData->Counter);\r
      return;\r
    }\r
  }\r
\r
  //\r
  // BSP is available\r
  //\r
  BspIndex = mSmmMpSyncData->BspIndex;\r
  ASSERT (CpuIndex != BspIndex);\r
\r
  //\r
  // Mark this processor's presence\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = TRUE;\r
\r
  if (SyncMode == SmmCpuSyncModeTradition || SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Notify BSP of arrival at this point\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Wait for the signal from BSP to backup MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Backup OS MTRRs\r
    //\r
    MtrrGetAllMtrrs(&Mtrrs);\r
\r
    //\r
    // Signal BSP the completion of this AP\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
    //\r
    // Wait for BSP's signal to program MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Replace OS MTRRs with SMI MTRRs\r
    //\r
    ReplaceOSMtrrs (CpuIndex);\r
\r
    //\r
    // Signal BSP the completion of this AP\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
\r
  while (TRUE) {\r
    //\r
    // Wait for something to happen\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Check if BSP wants to exit SMM\r
    //\r
    if (!(*mSmmMpSyncData->InsideSmm)) {\r
      break;\r
    }\r
\r
    //\r
    // BUSY should be acquired by SmmStartupThisAp()\r
    //\r
    ASSERT (\r
      !AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy)\r
      );\r
\r
    //\r
    // Invoke the scheduled procedure\r
    //\r
    ProcedureStatus = (*mSmmMpSyncData->CpuData[CpuIndex].Procedure) (\r
                          (VOID*)mSmmMpSyncData->CpuData[CpuIndex].Parameter\r
                          );\r
    if (mSmmMpSyncData->CpuData[CpuIndex].Status != NULL) {\r
      *mSmmMpSyncData->CpuData[CpuIndex].Status = ProcedureStatus;\r
    }\r
\r
    //\r
    // Release BUSY\r
    //\r
    ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
\r
    ReleaseToken (CpuIndex);\r
  }\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Notify BSP the readiness of this AP to program MTRRs\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
    //\r
    // Wait for the signal from BSP to program MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Restore OS MTRRs\r
    //\r
    SmmCpuFeaturesReenableSmrr ();\r
    MtrrSetAllMtrrs(&Mtrrs);\r
  }\r
\r
  //\r
  // Notify BSP the readiness of this AP to Reset states/semaphore for this processor\r
  //\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
  //\r
  // Wait for the signal from BSP to Reset states/semaphore for this processor\r
  //\r
  WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
  //\r
  // Reset states/semaphore for this processor\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = FALSE;\r
\r
  //\r
  // Notify BSP the readiness of this AP to exit SMM\r
  //\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
}\r
\r
/**\r
  Create 4G PageTable in SMRAM.\r
\r
  @param[in]      Is32BitPageTable Whether the page table is 32-bit PAE\r
  @return         PageTable Address\r
\r
**/\r
UINT32\r
Gen4GPageTable (\r
  IN      BOOLEAN                   Is32BitPageTable\r
  )\r
{\r
  VOID    *PageTable;\r
  UINTN   Index;\r
  UINT64  *Pte;\r
  UINTN   PagesNeeded;\r
  UINTN   Low2MBoundary;\r
  UINTN   High2MBoundary;\r
  UINTN   Pages;\r
  UINTN   GuardPage;\r
  UINT64  *Pdpte;\r
  UINTN   PageIndex;\r
  UINTN   PageAddress;\r
\r
  Low2MBoundary = 0;\r
  High2MBoundary = 0;\r
  PagesNeeded = 0;\r
  if (FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    //\r
    // Add one more page for known good stack, then find the lower 2MB aligned address.\r
    //\r
    Low2MBoundary = (mSmmStackArrayBase + EFI_PAGE_SIZE) & ~(SIZE_2MB-1);\r
    //\r
    // Add two more pages for known good stack and stack guard page,\r
    // then find the lower 2MB aligned address.\r
    //\r
    High2MBoundary = (mSmmStackArrayEnd - mSmmStackSize + EFI_PAGE_SIZE * 2) & ~(SIZE_2MB-1);\r
    PagesNeeded = ((High2MBoundary - Low2MBoundary) / SIZE_2MB) + 1;\r
  }\r
  //\r
  // Allocate the page table\r
  //\r
  PageTable = AllocatePageTableMemory (5 + PagesNeeded);\r
  ASSERT (PageTable != NULL);\r
\r
  PageTable = (VOID *)((UINTN)PageTable);\r
  Pte = (UINT64*)PageTable;\r
\r
  //\r
  // Zero out all page table entries first\r
  //\r
  ZeroMem (Pte, EFI_PAGES_TO_SIZE (1));\r
\r
  //\r
  // Set Page Directory Pointers\r
  //\r
  for (Index = 0; Index < 4; Index++) {\r
    Pte[Index] = ((UINTN)PageTable + EFI_PAGE_SIZE * (Index + 1)) | mAddressEncMask |\r
                   (Is32BitPageTable ? IA32_PAE_PDPTE_ATTRIBUTE_BITS : PAGE_ATTRIBUTE_BITS);\r
  }\r
  Pte += EFI_PAGE_SIZE / sizeof (*Pte);\r
\r
  //\r
  // Fill in Page Directory Entries\r
  //\r
  for (Index = 0; Index < EFI_PAGE_SIZE * 4 / sizeof (*Pte); Index++) {\r
    Pte[Index] = (Index << 21) | mAddressEncMask | IA32_PG_PS | PAGE_ATTRIBUTE_BITS;\r
  }\r
\r
  Pdpte = (UINT64*)PageTable;\r
  if (FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    Pages = (UINTN)PageTable + EFI_PAGES_TO_SIZE (5);\r
    GuardPage = mSmmStackArrayBase + EFI_PAGE_SIZE;\r
    for (PageIndex = Low2MBoundary; PageIndex <= High2MBoundary; PageIndex += SIZE_2MB) {\r
      Pte = (UINT64*)(UINTN)(Pdpte[BitFieldRead32 ((UINT32)PageIndex, 30, 31)] & ~mAddressEncMask & ~(EFI_PAGE_SIZE - 1));\r
      Pte[BitFieldRead32 ((UINT32)PageIndex, 21, 29)] = (UINT64)Pages | mAddressEncMask | PAGE_ATTRIBUTE_BITS;\r
      //\r
      // Fill in Page Table Entries\r
      //\r
      Pte = (UINT64*)Pages;\r
      PageAddress = PageIndex;\r
      for (Index = 0; Index < EFI_PAGE_SIZE / sizeof (*Pte); Index++) {\r
        if (PageAddress == GuardPage) {\r
          //\r
          // Mark the guard page as non-present\r
          //\r
          Pte[Index] = PageAddress | mAddressEncMask;\r
          GuardPage += mSmmStackSize;\r
          if (GuardPage > mSmmStackArrayEnd) {\r
            GuardPage = 0;\r
          }\r
        } else {\r
          Pte[Index] = PageAddress | mAddressEncMask | PAGE_ATTRIBUTE_BITS;\r
        }\r
        PageAddress+= EFI_PAGE_SIZE;\r
      }\r
      Pages += EFI_PAGE_SIZE;\r
    }\r
  }\r
\r
  if ((PcdGet8 (PcdNullPointerDetectionPropertyMask) & BIT1) != 0) {\r
    Pte = (UINT64*)(UINTN)(Pdpte[0] & ~mAddressEncMask & ~(EFI_PAGE_SIZE - 1));\r
    if ((Pte[0] & IA32_PG_PS) == 0) {\r
      // 4K-page entries are already mapped. Just hide the first one anyway.\r
      Pte = (UINT64*)(UINTN)(Pte[0] & ~mAddressEncMask & ~(EFI_PAGE_SIZE - 1));\r
      Pte[0] &= ~(UINT64)IA32_PG_P; // Hide page 0\r
    } else {\r
      // Create 4K-page entries\r
      Pages = (UINTN)AllocatePageTableMemory (1);\r
      ASSERT (Pages != 0);\r
\r
      Pte[0] = (UINT64)(Pages | mAddressEncMask | PAGE_ATTRIBUTE_BITS);\r
\r
      Pte = (UINT64*)Pages;\r
      PageAddress = 0;\r
      Pte[0] = PageAddress | mAddressEncMask; // Hide page 0 but present left\r
      for (Index = 1; Index < EFI_PAGE_SIZE / sizeof (*Pte); Index++) {\r
        PageAddress += EFI_PAGE_SIZE;\r
        Pte[Index] = PageAddress | mAddressEncMask | PAGE_ATTRIBUTE_BITS;\r
      }\r
    }\r
  }\r
\r
  return (UINT32)(UINTN)PageTable;\r
}\r
\r
/**\r
  Checks whether the input token is the current used token.\r
\r
  @param[in]  Token      This parameter describes the token that was passed into DispatchProcedure or\r
                         BroadcastProcedure.\r
\r
  @retval TRUE           The input token is the current used token.\r
  @retval FALSE          The input token is not the current used token.\r
**/\r
BOOLEAN\r
IsTokenInUse (\r
  IN SPIN_LOCK           *Token\r
  )\r
{\r
  LIST_ENTRY        *Link;\r
  PROCEDURE_TOKEN   *ProcToken;\r
\r
  if (Token == NULL) {\r
    return FALSE;\r
  }\r
\r
  Link = GetFirstNode (&gSmmCpuPrivate->TokenList);\r
  while (!IsNull (&gSmmCpuPrivate->TokenList, Link)) {\r
    ProcToken = PROCEDURE_TOKEN_FROM_LINK (Link);\r
\r
    if (ProcToken->ProcedureToken == Token) {\r
      return TRUE;\r
    }\r
\r
    Link = GetNextNode (&gSmmCpuPrivate->TokenList, Link);\r
  }\r
\r
  return FALSE;\r
}\r
\r
/**\r
  create token and save it to the maintain list.\r
\r
  @retval    return the spin lock used as token.\r
\r
**/\r
SPIN_LOCK *\r
CreateToken (\r
  VOID\r
  )\r
{\r
  PROCEDURE_TOKEN    *ProcToken;\r
  SPIN_LOCK           *CpuToken;\r
  UINTN               SpinLockSize;\r
\r
  SpinLockSize = GetSpinLockProperties ();\r
  CpuToken = AllocatePool (SpinLockSize);\r
  ASSERT (CpuToken != NULL);\r
  InitializeSpinLock (CpuToken);\r
  AcquireSpinLock (CpuToken);\r
\r
  ProcToken = AllocatePool (sizeof (PROCEDURE_TOKEN));\r
  ASSERT (ProcToken != NULL);\r
  ProcToken->Signature = PROCEDURE_TOKEN_SIGNATURE;\r
  ProcToken->ProcedureToken = CpuToken;\r
\r
  InsertTailList (&gSmmCpuPrivate->TokenList, &ProcToken->Link);\r
\r
  return CpuToken;\r
}\r
\r
/**\r
  Checks status of specified AP.\r
\r
  This function checks whether the specified AP has finished the task assigned\r
  by StartupThisAP(), and whether timeout expires.\r
\r
  @param[in]  Token             This parameter describes the token that was passed into DispatchProcedure or\r
                                BroadcastProcedure.\r
\r
  @retval EFI_SUCCESS           Specified AP has finished task assigned by StartupThisAPs().\r
  @retval EFI_NOT_READY         Specified AP has not finished task and timeout has not expired.\r
**/\r
EFI_STATUS\r
IsApReady (\r
  IN SPIN_LOCK          *Token\r
  )\r
{\r
  if (AcquireSpinLockOrFail (Token)) {\r
    ReleaseSpinLock (Token);\r
    return EFI_SUCCESS;\r
  }\r
\r
  return EFI_NOT_READY;\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU.\r
\r
  @param[in]       Procedure                The address of the procedure to run\r
  @param[in]       CpuIndex                 Target CPU Index\r
  @param[in,out]   ProcArguments            The parameter to pass to the procedure\r
  @param[in]       Token                    This is an optional parameter that allows the caller to execute the\r
                                            procedure in a blocking or non-blocking fashion. If it is NULL the\r
                                            call is blocking, and the call will not return until the AP has\r
                                            completed the procedure. If the token is not NULL, the call will\r
                                            return immediately. The caller can check whether the procedure has\r
                                            completed with CheckOnProcedure or WaitForProcedure.\r
  @param[in]       TimeoutInMicroseconds    Indicates the time limit in microseconds for the APs to finish\r
                                            execution of Procedure, either for blocking or non-blocking mode.\r
                                            Zero means infinity. If the timeout expires before all APs return\r
                                            from Procedure, then Procedure on the failed APs is terminated. If\r
                                            the timeout expires in blocking mode, the call returns EFI_TIMEOUT.\r
                                            If the timeout expires in non-blocking mode, the timeout determined\r
                                            can be through CheckOnProcedure or WaitForProcedure.\r
                                            Note that timeout support is optional. Whether an implementation\r
                                            supports this feature can be determined via the Attributes data\r
                                            member.\r
  @param[in,out]   CpuStatus                This optional pointer may be used to get the status code returned\r
                                            by Procedure when it completes execution on the target AP, or with\r
                                            EFI_TIMEOUT if the Procedure fails to complete within the optional\r
                                            timeout. The implementation will update this variable with\r
                                            EFI_NOT_READY prior to starting Procedure on the target AP.\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
InternalSmmStartupThisAp (\r
  IN      EFI_AP_PROCEDURE2              Procedure,\r
  IN      UINTN                          CpuIndex,\r
  IN OUT  VOID                           *ProcArguments OPTIONAL,\r
  IN      MM_COMPLETION                  *Token,\r
  IN      UINTN                          TimeoutInMicroseconds,\r
  IN OUT  EFI_STATUS                     *CpuStatus\r
  )\r
{\r
  if (CpuIndex >= gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus) {\r
    DEBUG((DEBUG_ERROR, "CpuIndex(%d) >= gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus(%d)\n", CpuIndex, gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus));\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (CpuIndex == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) {\r
    DEBUG((DEBUG_ERROR, "CpuIndex(%d) == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu\n", CpuIndex));\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (gSmmCpuPrivate->ProcessorInfo[CpuIndex].ProcessorId == INVALID_APIC_ID) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (!(*(mSmmMpSyncData->CpuData[CpuIndex].Present))) {\r
    if (mSmmMpSyncData->EffectiveSyncMode == SmmCpuSyncModeTradition) {\r
      DEBUG((DEBUG_ERROR, "!mSmmMpSyncData->CpuData[%d].Present\n", CpuIndex));\r
    }\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (gSmmCpuPrivate->Operation[CpuIndex] == SmmCpuRemove) {\r
    if (!FeaturePcdGet (PcdCpuHotPlugSupport)) {\r
      DEBUG((DEBUG_ERROR, "gSmmCpuPrivate->Operation[%d] == SmmCpuRemove\n", CpuIndex));\r
    }\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if ((TimeoutInMicroseconds != 0) && ((mSmmMp.Attributes & EFI_MM_MP_TIMEOUT_SUPPORTED) == 0)) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (Procedure == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  if (Token == NULL) {\r
    AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
  } else {\r
    if (!AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy)) {\r
      DEBUG((DEBUG_ERROR, "Can't acquire mSmmMpSyncData->CpuData[%d].Busy\n", CpuIndex));\r
      return EFI_NOT_READY;\r
    }\r
\r
    *Token = (MM_COMPLETION) CreateToken ();\r
  }\r
\r
  mSmmMpSyncData->CpuData[CpuIndex].Procedure = Procedure;\r
  mSmmMpSyncData->CpuData[CpuIndex].Parameter = ProcArguments;\r
  if (Token != NULL) {\r
    mSmmMpSyncData->CpuData[CpuIndex].Token   = (SPIN_LOCK *)(*Token);\r
  }\r
  mSmmMpSyncData->CpuData[CpuIndex].Status    = CpuStatus;\r
  if (mSmmMpSyncData->CpuData[CpuIndex].Status != NULL) {\r
    *mSmmMpSyncData->CpuData[CpuIndex].Status = EFI_NOT_READY;\r
  }\r
\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
  if (Token == NULL) {\r
    AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
    ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
  }\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Worker function to execute a caller provided function on all enabled APs.\r
\r
  @param[in]     Procedure               A pointer to the function to be run on\r
                                         enabled APs of the system.\r
  @param[in]     TimeoutInMicroseconds   Indicates the time limit in microseconds for\r
                                         APs to return from Procedure, either for\r
                                         blocking or non-blocking mode.\r
  @param[in,out] ProcedureArguments      The parameter passed into Procedure for\r
                                         all APs.\r
  @param[in,out] Token                   This is an optional parameter that allows the caller to execute the\r
                                         procedure in a blocking or non-blocking fashion. If it is NULL the\r
                                         call is blocking, and the call will not return until the AP has\r
                                         completed the procedure. If the token is not NULL, the call will\r
                                         return immediately. The caller can check whether the procedure has\r
                                         completed with CheckOnProcedure or WaitForProcedure.\r
  @param[in,out] CPUStatus               This optional pointer may be used to get the status code returned\r
                                         by Procedure when it completes execution on the target AP, or with\r
                                         EFI_TIMEOUT if the Procedure fails to complete within the optional\r
                                         timeout. The implementation will update this variable with\r
                                         EFI_NOT_READY prior to starting Procedure on the target AP.\r
\r
\r
  @retval EFI_SUCCESS             In blocking mode, all APs have finished before\r
                                  the timeout expired.\r
  @retval EFI_SUCCESS             In non-blocking mode, function has been dispatched\r
                                  to all enabled APs.\r
  @retval others                  Failed to Startup all APs.\r
\r
**/\r
EFI_STATUS\r
InternalSmmStartupAllAPs (\r
  IN       EFI_AP_PROCEDURE2             Procedure,\r
  IN       UINTN                         TimeoutInMicroseconds,\r
  IN OUT   VOID                          *ProcedureArguments OPTIONAL,\r
  IN OUT   MM_COMPLETION                 *Token,\r
  IN OUT   EFI_STATUS                    *CPUStatus\r
  )\r
{\r
  UINTN               Index;\r
  UINTN               CpuCount;\r
\r
  if ((TimeoutInMicroseconds != 0) && ((mSmmMp.Attributes & EFI_MM_MP_TIMEOUT_SUPPORTED) == 0)) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (Procedure == NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  CpuCount = 0;\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (IsPresentAp (Index)) {\r
      CpuCount ++;\r
\r
      if (gSmmCpuPrivate->Operation[Index] == SmmCpuRemove) {\r
        return EFI_INVALID_PARAMETER;\r
      }\r
\r
      if (!AcquireSpinLockOrFail(mSmmMpSyncData->CpuData[Index].Busy)) {\r
        return EFI_NOT_READY;\r
      }\r
      ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Busy);\r
    }\r
  }\r
  if (CpuCount == 0) {\r
    return EFI_NOT_STARTED;\r
  }\r
\r
  if (Token != NULL) {\r
    *Token = (MM_COMPLETION) CreateToken ();\r
  }\r
\r
  //\r
  // Make sure all BUSY should be acquired.\r
  //\r
  // Because former code already check mSmmMpSyncData->CpuData[***].Busy for each AP.\r
  // Here code always use AcquireSpinLock instead of AcquireSpinLockOrFail for not\r
  // block mode.\r
  //\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (IsPresentAp (Index)) {\r
      AcquireSpinLock (mSmmMpSyncData->CpuData[Index].Busy);\r
    }\r
  }\r
\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (IsPresentAp (Index)) {\r
      mSmmMpSyncData->CpuData[Index].Procedure = (EFI_AP_PROCEDURE2) Procedure;\r
      mSmmMpSyncData->CpuData[Index].Parameter = ProcedureArguments;\r
      if (Token != NULL) {\r
        mSmmMpSyncData->CpuData[Index].Token   = (SPIN_LOCK *)(*Token);\r
      }\r
      if (CPUStatus != NULL) {\r
        mSmmMpSyncData->CpuData[Index].Status    = &CPUStatus[Index];\r
        if (mSmmMpSyncData->CpuData[Index].Status != NULL) {\r
          *mSmmMpSyncData->CpuData[Index].Status = EFI_NOT_READY;\r
        }\r
      }\r
    } else {\r
      //\r
      // PI spec requirement:\r
      // For every excluded processor, the array entry must contain a value of EFI_NOT_STARTED.\r
      //\r
      if (CPUStatus != NULL) {\r
        CPUStatus[Index] = EFI_NOT_STARTED;\r
      }\r
    }\r
  }\r
\r
  ReleaseAllAPs ();\r
\r
  if (Token == NULL) {\r
    //\r
    // Make sure all APs have completed their tasks.\r
    //\r
    WaitForAllAPsNotBusy (TRUE);\r
  }\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  ISO C99 6.5.2.2 "Function calls", paragraph 9:\r
  If the function is defined with a type that is not compatible with\r
  the type (of the expression) pointed to by the expression that\r
  denotes the called function, the behavior is undefined.\r
\r
  So add below wrapper function to convert between EFI_AP_PROCEDURE\r
  and EFI_AP_PROCEDURE2.\r
\r
  Wrapper for Procedures.\r
\r
  @param[in]  Buffer              Pointer to PROCEDURE_WRAPPER buffer.\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
ProcedureWrapper (\r
  IN OUT VOID *Buffer\r
  )\r
{\r
  PROCEDURE_WRAPPER *Wrapper;\r
\r
  Wrapper = Buffer;\r
  Wrapper->Procedure (Wrapper->ProcedureArgument);\r
\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU in blocking mode.\r
\r
  @param[in]       Procedure                The address of the procedure to run\r
  @param[in]       CpuIndex                 Target CPU Index\r
  @param[in, out]  ProcArguments            The parameter to pass to the procedure\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmBlockingStartupThisAp (\r
  IN      EFI_AP_PROCEDURE          Procedure,\r
  IN      UINTN                     CpuIndex,\r
  IN OUT  VOID                      *ProcArguments OPTIONAL\r
  )\r
{\r
  PROCEDURE_WRAPPER  Wrapper;\r
\r
  Wrapper.Procedure = Procedure;\r
  Wrapper.ProcedureArgument = ProcArguments;\r
\r
  //\r
  // Use wrapper function to convert EFI_AP_PROCEDURE to EFI_AP_PROCEDURE2.\r
  //\r
  return InternalSmmStartupThisAp (ProcedureWrapper, CpuIndex, &Wrapper, NULL, 0, NULL);\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU.\r
\r
  @param  Procedure                The address of the procedure to run\r
  @param  CpuIndex                 Target CPU Index\r
  @param  ProcArguments            The parameter to pass to the procedure\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmStartupThisAp (\r
  IN      EFI_AP_PROCEDURE          Procedure,\r
  IN      UINTN                     CpuIndex,\r
  IN OUT  VOID                      *ProcArguments OPTIONAL\r
  )\r
{\r
  MM_COMPLETION               Token;\r
\r
  gSmmCpuPrivate->ApWrapperFunc[CpuIndex].Procedure = Procedure;\r
  gSmmCpuPrivate->ApWrapperFunc[CpuIndex].ProcedureArgument = ProcArguments;\r
\r
  //\r
  // Use wrapper function to convert EFI_AP_PROCEDURE to EFI_AP_PROCEDURE2.\r
  //\r
  return InternalSmmStartupThisAp (\r
    ProcedureWrapper,\r
    CpuIndex,\r
    &gSmmCpuPrivate->ApWrapperFunc[CpuIndex],\r
    FeaturePcdGet (PcdCpuSmmBlockStartupThisAp) ? NULL : &Token,\r
    0,\r
    NULL\r
    );\r
}\r
\r
/**\r
  This function sets DR6 & DR7 according to SMM save state, before running SMM C code.\r
  They are useful when you want to enable hardware breakpoints in SMM without entry SMM mode.\r
\r
  NOTE: It might not be appreciated in runtime since it might\r
        conflict with OS debugging facilities. Turn them off in RELEASE.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
CpuSmmDebugEntry (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
  SMRAM_SAVE_STATE_MAP *CpuSaveState;\r
\r
  if (FeaturePcdGet (PcdCpuSmmDebug)) {\r
    ASSERT(CpuIndex < mMaxNumberOfCpus);\r
    CpuSaveState = (SMRAM_SAVE_STATE_MAP *)gSmmCpuPrivate->CpuSaveState[CpuIndex];\r
    if (mSmmSaveStateRegisterLma == EFI_SMM_SAVE_STATE_REGISTER_LMA_32BIT) {\r
      AsmWriteDr6 (CpuSaveState->x86._DR6);\r
      AsmWriteDr7 (CpuSaveState->x86._DR7);\r
    } else {\r
      AsmWriteDr6 ((UINTN)CpuSaveState->x64._DR6);\r
      AsmWriteDr7 ((UINTN)CpuSaveState->x64._DR7);\r
    }\r
  }\r
}\r
\r
/**\r
  This function restores DR6 & DR7 to SMM save state.\r
\r
  NOTE: It might not be appreciated in runtime since it might\r
        conflict with OS debugging facilities. Turn them off in RELEASE.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
CpuSmmDebugExit (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
  SMRAM_SAVE_STATE_MAP *CpuSaveState;\r
\r
  if (FeaturePcdGet (PcdCpuSmmDebug)) {\r
    ASSERT(CpuIndex < mMaxNumberOfCpus);\r
    CpuSaveState = (SMRAM_SAVE_STATE_MAP *)gSmmCpuPrivate->CpuSaveState[CpuIndex];\r
    if (mSmmSaveStateRegisterLma == EFI_SMM_SAVE_STATE_REGISTER_LMA_32BIT) {\r
      CpuSaveState->x86._DR7 = (UINT32)AsmReadDr7 ();\r
      CpuSaveState->x86._DR6 = (UINT32)AsmReadDr6 ();\r
    } else {\r
      CpuSaveState->x64._DR7 = AsmReadDr7 ();\r
      CpuSaveState->x64._DR6 = AsmReadDr6 ();\r
    }\r
  }\r
}\r
\r
/**\r
  C function for SMI entry, each processor comes here upon SMI trigger.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
SmiRendezvous (\r
  IN      UINTN                     CpuIndex\r
  )\r
{\r
  EFI_STATUS                     Status;\r
  BOOLEAN                        ValidSmi;\r
  BOOLEAN                        IsBsp;\r
  BOOLEAN                        BspInProgress;\r
  UINTN                          Index;\r
  UINTN                          Cr2;\r
\r
  ASSERT(CpuIndex < mMaxNumberOfCpus);\r
\r
  //\r
  // Save Cr2 because Page Fault exception in SMM may override its value,\r
  // when using on-demand paging for above 4G memory.\r
  //\r
  Cr2 = 0;\r
  SaveCr2 (&Cr2);\r
\r
  //\r
  // Call the user register Startup function first.\r
  //\r
  if (mSmmMpSyncData->StartupProcedure != NULL) {\r
    mSmmMpSyncData->StartupProcedure (mSmmMpSyncData->StartupProcArgs);\r
  }\r
\r
  //\r
  // Perform CPU specific entry hooks\r
  //\r
  SmmCpuFeaturesRendezvousEntry (CpuIndex);\r
\r
  //\r
  // Determine if this is a valid SMI\r
  //\r
  ValidSmi = PlatformValidSmi();\r
\r
  //\r
  // Determine if BSP has been already in progress. Note this must be checked after\r
  // ValidSmi because BSP may clear a valid SMI source after checking in.\r
  //\r
  BspInProgress = *mSmmMpSyncData->InsideSmm;\r
\r
  if (!BspInProgress && !ValidSmi) {\r
    //\r
    // If we reach here, it means when we sampled the ValidSmi flag, SMI status had not\r
    // been cleared by BSP in a new SMI run (so we have a truly invalid SMI), or SMI\r
    // status had been cleared by BSP and an existing SMI run has almost ended. (Note\r
    // we sampled ValidSmi flag BEFORE judging BSP-in-progress status.) In both cases, there\r
    // is nothing we need to do.\r
    //\r
    goto Exit;\r
  } else {\r
    //\r
    // Signal presence of this processor\r
    //\r
    if (ReleaseSemaphore (mSmmMpSyncData->Counter) == 0) {\r
      //\r
      // BSP has already ended the synchronization, so QUIT!!!\r
      //\r
\r
      //\r
      // Wait for BSP's signal to finish SMI\r
      //\r
      while (*mSmmMpSyncData->AllCpusInSync) {\r
        CpuPause ();\r
      }\r
      goto Exit;\r
    } else {\r
\r
      //\r
      // The BUSY lock is initialized to Released state.\r
      // This needs to be done early enough to be ready for BSP's SmmStartupThisAp() call.\r
      // E.g., with Relaxed AP flow, SmmStartupThisAp() may be called immediately\r
      // after AP's present flag is detected.\r
      //\r
      InitializeSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
    }\r
\r
    if (FeaturePcdGet (PcdCpuSmmProfileEnable)) {\r
      ActivateSmmProfile (CpuIndex);\r
    }\r
\r
    if (BspInProgress) {\r
      //\r
      // BSP has been elected. Follow AP path, regardless of ValidSmi flag\r
      // as BSP may have cleared the SMI status\r
      //\r
      APHandler (CpuIndex, ValidSmi, mSmmMpSyncData->EffectiveSyncMode);\r
    } else {\r
      //\r
      // We have a valid SMI\r
      //\r
\r
      //\r
      // Elect BSP\r
      //\r
      IsBsp = FALSE;\r
      if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
        if (!mSmmMpSyncData->SwitchBsp || mSmmMpSyncData->CandidateBsp[CpuIndex]) {\r
          //\r
          // Call platform hook to do BSP election\r
          //\r
          Status = PlatformSmmBspElection (&IsBsp);\r
          if (EFI_SUCCESS == Status) {\r
            //\r
            // Platform hook determines successfully\r
            //\r
            if (IsBsp) {\r
              mSmmMpSyncData->BspIndex = (UINT32)CpuIndex;\r
            }\r
          } else {\r
            //\r
            // Platform hook fails to determine, use default BSP election method\r
            //\r
            InterlockedCompareExchange32 (\r
              (UINT32*)&mSmmMpSyncData->BspIndex,\r
              (UINT32)-1,\r
              (UINT32)CpuIndex\r
              );\r
          }\r
        }\r
      }\r
\r
      //\r
      // "mSmmMpSyncData->BspIndex == CpuIndex" means this is the BSP\r
      //\r
      if (mSmmMpSyncData->BspIndex == CpuIndex) {\r
\r
        //\r
        // Clear last request for SwitchBsp.\r
        //\r
        if (mSmmMpSyncData->SwitchBsp) {\r
          mSmmMpSyncData->SwitchBsp = FALSE;\r
          for (Index = 0; Index < mMaxNumberOfCpus; Index++) {\r
            mSmmMpSyncData->CandidateBsp[Index] = FALSE;\r
          }\r
        }\r
\r
        if (FeaturePcdGet (PcdCpuSmmProfileEnable)) {\r
          SmmProfileRecordSmiNum ();\r
        }\r
\r
        //\r
        // BSP Handler is always called with a ValidSmi == TRUE\r
        //\r
        BSPHandler (CpuIndex, mSmmMpSyncData->EffectiveSyncMode);\r
      } else {\r
        APHandler (CpuIndex, ValidSmi, mSmmMpSyncData->EffectiveSyncMode);\r
      }\r
    }\r
\r
    ASSERT (*mSmmMpSyncData->CpuData[CpuIndex].Run == 0);\r
\r
    //\r
    // Wait for BSP's signal to exit SMI\r
    //\r
    while (*mSmmMpSyncData->AllCpusInSync) {\r
      CpuPause ();\r
    }\r
  }\r
\r
Exit:\r
  SmmCpuFeaturesRendezvousExit (CpuIndex);\r
\r
  //\r
  // Restore Cr2\r
  //\r
  RestoreCr2 (Cr2);\r
}\r
\r
/**\r
  Allocate buffer for SpinLock and Wrapper function buffer.\r
\r
**/\r
VOID\r
InitializeDataForMmMp (\r
  VOID\r
  )\r
{\r
  gSmmCpuPrivate->ApWrapperFunc = AllocatePool (sizeof (PROCEDURE_WRAPPER) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);\r
  ASSERT (gSmmCpuPrivate->ApWrapperFunc != NULL);\r
\r
  InitializeListHead (&gSmmCpuPrivate->TokenList);\r
}\r
\r
/**\r
  Allocate buffer for all semaphores and spin locks.\r
\r
**/\r
VOID\r
InitializeSmmCpuSemaphores (\r
  VOID\r
  )\r
{\r
  UINTN                      ProcessorCount;\r
  UINTN                      TotalSize;\r
  UINTN                      GlobalSemaphoresSize;\r
  UINTN                      CpuSemaphoresSize;\r
  UINTN                      SemaphoreSize;\r
  UINTN                      Pages;\r
  UINTN                      *SemaphoreBlock;\r
  UINTN                      SemaphoreAddr;\r
\r
  SemaphoreSize   = GetSpinLockProperties ();\r
  ProcessorCount = gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
  GlobalSemaphoresSize = (sizeof (SMM_CPU_SEMAPHORE_GLOBAL) / sizeof (VOID *)) * SemaphoreSize;\r
  CpuSemaphoresSize    = (sizeof (SMM_CPU_SEMAPHORE_CPU) / sizeof (VOID *)) * ProcessorCount * SemaphoreSize;\r
  TotalSize = GlobalSemaphoresSize + CpuSemaphoresSize;\r
  DEBUG((EFI_D_INFO, "One Semaphore Size    = 0x%x\n", SemaphoreSize));\r
  DEBUG((EFI_D_INFO, "Total Semaphores Size = 0x%x\n", TotalSize));\r
  Pages = EFI_SIZE_TO_PAGES (TotalSize);\r
  SemaphoreBlock = AllocatePages (Pages);\r
  ASSERT (SemaphoreBlock != NULL);\r
  ZeroMem (SemaphoreBlock, TotalSize);\r
\r
  SemaphoreAddr = (UINTN)SemaphoreBlock;\r
  mSmmCpuSemaphores.SemaphoreGlobal.Counter       = (UINT32 *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.InsideSmm     = (BOOLEAN *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.AllCpusInSync = (BOOLEAN *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.PFLock        = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.CodeAccessCheckLock\r
                                                  = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
\r
  SemaphoreAddr = (UINTN)SemaphoreBlock + GlobalSemaphoresSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Busy    = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += ProcessorCount * SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Run     = (UINT32 *)SemaphoreAddr;\r
  SemaphoreAddr += ProcessorCount * SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Present = (BOOLEAN *)SemaphoreAddr;\r
\r
  mPFLock                       = mSmmCpuSemaphores.SemaphoreGlobal.PFLock;\r
  mConfigSmmCodeAccessCheckLock = mSmmCpuSemaphores.SemaphoreGlobal.CodeAccessCheckLock;\r
\r
  mSemaphoreSize = SemaphoreSize;\r
}\r
\r
/**\r
  Initialize un-cacheable data.\r
\r
**/\r
VOID\r
EFIAPI\r
InitializeMpSyncData (\r
  VOID\r
  )\r
{\r
  UINTN                      CpuIndex;\r
\r
  if (mSmmMpSyncData != NULL) {\r
    //\r
    // mSmmMpSyncDataSize includes one structure of SMM_DISPATCHER_MP_SYNC_DATA, one\r
    // CpuData array of SMM_CPU_DATA_BLOCK and one CandidateBsp array of BOOLEAN.\r
    //\r
    ZeroMem (mSmmMpSyncData, mSmmMpSyncDataSize);\r
    mSmmMpSyncData->CpuData = (SMM_CPU_DATA_BLOCK *)((UINT8 *)mSmmMpSyncData + sizeof (SMM_DISPATCHER_MP_SYNC_DATA));\r
    mSmmMpSyncData->CandidateBsp = (BOOLEAN *)(mSmmMpSyncData->CpuData + gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);\r
    if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
      //\r
      // Enable BSP election by setting BspIndex to -1\r
      //\r
      mSmmMpSyncData->BspIndex = (UINT32)-1;\r
    }\r
    mSmmMpSyncData->EffectiveSyncMode = mCpuSmmSyncMode;\r
\r
    mSmmMpSyncData->Counter       = mSmmCpuSemaphores.SemaphoreGlobal.Counter;\r
    mSmmMpSyncData->InsideSmm     = mSmmCpuSemaphores.SemaphoreGlobal.InsideSmm;\r
    mSmmMpSyncData->AllCpusInSync = mSmmCpuSemaphores.SemaphoreGlobal.AllCpusInSync;\r
    ASSERT (mSmmMpSyncData->Counter != NULL && mSmmMpSyncData->InsideSmm != NULL &&\r
            mSmmMpSyncData->AllCpusInSync != NULL);\r
    *mSmmMpSyncData->Counter       = 0;\r
    *mSmmMpSyncData->InsideSmm     = FALSE;\r
    *mSmmMpSyncData->AllCpusInSync = FALSE;\r
\r
    for (CpuIndex = 0; CpuIndex < gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus; CpuIndex ++) {\r
      mSmmMpSyncData->CpuData[CpuIndex].Busy    =\r
        (SPIN_LOCK *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Busy + mSemaphoreSize * CpuIndex);\r
      mSmmMpSyncData->CpuData[CpuIndex].Run     =\r
        (UINT32 *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Run + mSemaphoreSize * CpuIndex);\r
      mSmmMpSyncData->CpuData[CpuIndex].Present =\r
        (BOOLEAN *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Present + mSemaphoreSize * CpuIndex);\r
      *(mSmmMpSyncData->CpuData[CpuIndex].Busy)    = 0;\r
      *(mSmmMpSyncData->CpuData[CpuIndex].Run)     = 0;\r
      *(mSmmMpSyncData->CpuData[CpuIndex].Present) = FALSE;\r
    }\r
  }\r
}\r
\r
/**\r
  Initialize global data for MP synchronization.\r
\r
  @param Stacks             Base address of SMI stack buffer for all processors.\r
  @param StackSize          Stack size for each processor in SMM.\r
  @param ShadowStackSize    Shadow Stack size for each processor in SMM.\r
\r
**/\r
UINT32\r
InitializeMpServiceData (\r
  IN VOID        *Stacks,\r
  IN UINTN       StackSize,\r
  IN UINTN       ShadowStackSize\r
  )\r
{\r
  UINT32                    Cr3;\r
  UINTN                     Index;\r
  UINT8                     *GdtTssTables;\r
  UINTN                     GdtTableStepSize;\r
  CPUID_VERSION_INFO_EDX    RegEdx;\r
\r
  //\r
  // Determine if this CPU supports machine check\r
  //\r
  AsmCpuid (CPUID_VERSION_INFO, NULL, NULL, NULL, &RegEdx.Uint32);\r
  mMachineCheckSupported = (BOOLEAN)(RegEdx.Bits.MCA == 1);\r
\r
  //\r
  // Allocate memory for all locks and semaphores\r
  //\r
  InitializeSmmCpuSemaphores ();\r
\r
  //\r
  // Initialize mSmmMpSyncData\r
  //\r
  mSmmMpSyncDataSize = sizeof (SMM_DISPATCHER_MP_SYNC_DATA) +\r
                       (sizeof (SMM_CPU_DATA_BLOCK) + sizeof (BOOLEAN)) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
  mSmmMpSyncData = (SMM_DISPATCHER_MP_SYNC_DATA*) AllocatePages (EFI_SIZE_TO_PAGES (mSmmMpSyncDataSize));\r
  ASSERT (mSmmMpSyncData != NULL);\r
  mCpuSmmSyncMode = (SMM_CPU_SYNC_MODE)PcdGet8 (PcdCpuSmmSyncMode);\r
  InitializeMpSyncData ();\r
\r
  //\r
  // Initialize physical address mask\r
  // NOTE: Physical memory above virtual address limit is not supported !!!\r
  //\r
  AsmCpuid (0x80000008, (UINT32*)&Index, NULL, NULL, NULL);\r
  gPhyMask = LShiftU64 (1, (UINT8)Index) - 1;\r
  gPhyMask &= (1ull << 48) - EFI_PAGE_SIZE;\r
\r
  //\r
  // Create page tables\r
  //\r
  Cr3 = SmmInitPageTable ();\r
\r
  GdtTssTables = InitGdt (Cr3, &GdtTableStepSize);\r
\r
  //\r
  // Install SMI handler for each CPU\r
  //\r
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {\r
    InstallSmiHandler (\r
      Index,\r
      (UINT32)mCpuHotPlugData.SmBase[Index],\r
      (VOID*)((UINTN)Stacks + (StackSize + ShadowStackSize) * Index),\r
      StackSize,\r
      (UINTN)(GdtTssTables + GdtTableStepSize * Index),\r
      gcSmiGdtr.Limit + 1,\r
      gcSmiIdtr.Base,\r
      gcSmiIdtr.Limit + 1,\r
      Cr3\r
      );\r
  }\r
\r
  //\r
  // Record current MTRR settings\r
  //\r
  ZeroMem (&gSmiMtrrs, sizeof (gSmiMtrrs));\r
  MtrrGetAllMtrrs (&gSmiMtrrs);\r
\r
  return Cr3;\r
}\r
\r
/**\r
\r
  Register the SMM Foundation entry point.\r
\r
  @param          This              Pointer to EFI_SMM_CONFIGURATION_PROTOCOL instance\r
  @param          SmmEntryPoint     SMM Foundation EntryPoint\r
\r
  @retval         EFI_SUCCESS       Successfully to register SMM foundation entry point\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
RegisterSmmEntry (\r
  IN CONST EFI_SMM_CONFIGURATION_PROTOCOL  *This,\r
  IN EFI_SMM_ENTRY_POINT                   SmmEntryPoint\r
  )\r
{\r
  //\r
  // Record SMM Foundation EntryPoint, later invoke it on SMI entry vector.\r
  //\r
  gSmmCpuPrivate->SmmCoreEntry = SmmEntryPoint;\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
\r
  Register the SMM Foundation entry point.\r
\r
  @param[in]      Procedure            A pointer to the code stream to be run on the designated target AP\r
                                       of the system. Type EFI_AP_PROCEDURE is defined below in Volume 2\r
                                       with the related definitions of\r
                                       EFI_MP_SERVICES_PROTOCOL.StartupAllAPs.\r
                                       If caller may pass a value of NULL to deregister any existing\r
                                       startup procedure.\r
  @param[in]      ProcedureArguments   Allows the caller to pass a list of parameters to the code that is\r
                                       run by the AP. It is an optional common mailbox between APs and\r
                                       the caller to share information\r
\r
  @retval EFI_SUCCESS                  The Procedure has been set successfully.\r
  @retval EFI_INVALID_PARAMETER        The Procedure is NULL but ProcedureArguments not NULL.\r
\r
**/\r
EFI_STATUS\r
RegisterStartupProcedure (\r
  IN EFI_AP_PROCEDURE    Procedure,\r
  IN VOID                *ProcedureArguments OPTIONAL\r
  )\r
{\r
  if (Procedure == NULL && ProcedureArguments != NULL) {\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (mSmmMpSyncData == NULL) {\r
    return EFI_NOT_READY;\r
  }\r
\r
  mSmmMpSyncData->StartupProcedure = Procedure;\r
  mSmmMpSyncData->StartupProcArgs  = ProcedureArguments;\r
\r
  return EFI_SUCCESS;\r
}\r