[mirror_edk2.git] / UefiCpuPkg / PiSmmCpuDxeSmm / MpService.c

/** @file\r
SMM MP service implementation\r
\r
Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution.  The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include "PiSmmCpuDxeSmm.h"\r
\r
//\r
// Slots for all MTRR( FIXED MTRR + VARIABLE MTRR + MTRR_LIB_IA32_MTRR_DEF_TYPE)\r
//\r
UINT64                                      gSmiMtrrs[MTRR_NUMBER_OF_FIXED_MTRR + 2 * MTRR_NUMBER_OF_VARIABLE_MTRR + 1];\r
UINT64                                      gPhyMask;\r
SMM_DISPATCHER_MP_SYNC_DATA                 *mSmmMpSyncData = NULL;\r
UINTN                                       mSmmMpSyncDataSize;\r
SMM_CPU_SEMAPHORES                          mSmmCpuSemaphores;\r
UINTN                                       mSemaphoreSize;\r
SPIN_LOCK                                   *mPFLock = NULL;\r
\r
/**\r
  Performs an atomic compare exchange operation to get semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: original integer - 1\r
  @return     Original integer - 1\r
\r
**/\r
UINT32\r
WaitForSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (Value == 0 ||\r
           InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value,\r
             Value - 1\r
             ) != Value);\r
  return Value - 1;\r
}\r
\r
\r
/**\r
  Performs an atomic compare exchange operation to release semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: original integer + 1\r
  @return     Original integer + 1\r
\r
**/\r
UINT32\r
ReleaseSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (Value + 1 != 0 &&\r
           InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value,\r
             Value + 1\r
             ) != Value);\r
  return Value + 1;\r
}\r
\r
/**\r
  Performs an atomic compare exchange operation to lock semaphore.\r
  The compare exchange operation must be performed using\r
  MP safe mechanisms.\r
\r
  @param      Sem        IN:  32-bit unsigned integer\r
                         OUT: -1\r
  @return     Original integer\r
\r
**/\r
UINT32\r
LockdownSemaphore (\r
  IN OUT  volatile UINT32           *Sem\r
  )\r
{\r
  UINT32                            Value;\r
\r
  do {\r
    Value = *Sem;\r
  } while (InterlockedCompareExchange32 (\r
             (UINT32*)Sem,\r
             Value, (UINT32)-1\r
             ) != Value);\r
  return Value;\r
}\r
\r
/**\r
  Wait all APs to performs an atomic compare exchange operation to release semaphore.\r
\r
  @param   NumberOfAPs      AP number\r
\r
**/\r
VOID\r
WaitForAllAPs (\r
  IN      UINTN                     NumberOfAPs\r
  )\r
{\r
  UINTN                             BspIndex;\r
\r
  BspIndex = mSmmMpSyncData->BspIndex;\r
  while (NumberOfAPs-- > 0) {\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
}\r
\r
/**\r
  Performs an atomic compare exchange operation to release semaphore\r
  for each AP.\r
\r
**/\r
VOID\r
ReleaseAllAPs (\r
  VOID\r
  )\r
{\r
  UINTN                             Index;\r
  UINTN                             BspIndex;\r
\r
  BspIndex = mSmmMpSyncData->BspIndex;\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (Index != BspIndex && *(mSmmMpSyncData->CpuData[Index].Present)) {\r
      ReleaseSemaphore (mSmmMpSyncData->CpuData[Index].Run);\r
    }\r
  }\r
}\r
\r
/**\r
  Checks if all CPUs (with certain exceptions) have checked in for this SMI run\r
\r
  @param   Exceptions     CPU Arrival exception flags.\r
\r
  @retval   TRUE  if all CPUs the have checked in.\r
  @retval   FALSE  if at least one Normal AP hasn't checked in.\r
\r
**/\r
BOOLEAN\r
AllCpusInSmmWithExceptions (\r
  SMM_CPU_ARRIVAL_EXCEPTIONS  Exceptions\r
  )\r
{\r
  UINTN                             Index;\r
  SMM_CPU_DATA_BLOCK                *CpuData;\r
  EFI_PROCESSOR_INFORMATION         *ProcessorInfo;\r
\r
  ASSERT (*mSmmMpSyncData->Counter <= mNumberOfCpus);\r
\r
  if (*mSmmMpSyncData->Counter == mNumberOfCpus) {\r
    return TRUE;\r
  }\r
\r
  CpuData = mSmmMpSyncData->CpuData;\r
  ProcessorInfo = gSmmCpuPrivate->ProcessorInfo;\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (!(*(CpuData[Index].Present)) && ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {\r
      if (((Exceptions & ARRIVAL_EXCEPTION_DELAYED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmDelayed) != 0) {\r
        continue;\r
      }\r
      if (((Exceptions & ARRIVAL_EXCEPTION_BLOCKED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmBlocked) != 0) {\r
        continue;\r
      }\r
      if (((Exceptions & ARRIVAL_EXCEPTION_SMI_DISABLED) != 0) && SmmCpuFeaturesGetSmmRegister (Index, SmmRegSmmEnable) != 0) {\r
        continue;\r
      }\r
      return FALSE;\r
    }\r
  }\r
\r
\r
  return TRUE;\r
}\r
\r
\r
/**\r
  Given timeout constraint, wait for all APs to arrive, and insure when this function returns, no AP will execute normal mode code before\r
  entering SMM, except SMI disabled APs.\r
\r
**/\r
VOID\r
SmmWaitForApArrival (\r
  VOID\r
  )\r
{\r
  UINT64                            Timer;\r
  UINTN                             Index;\r
\r
  ASSERT (*mSmmMpSyncData->Counter <= mNumberOfCpus);\r
\r
  //\r
  // Platform implementor should choose a timeout value appropriately:\r
  // - The timeout value should balance the SMM time constrains and the likelihood that delayed CPUs are excluded in the SMM run. Note\r
  //   the SMI Handlers must ALWAYS take into account the cases that not all APs are available in an SMI run.\r
  // - The timeout value must, in the case of 2nd timeout, be at least long enough to give time for all APs to receive the SMI IPI\r
  //   and either enter SMM or buffer the SMI, to insure there is no CPU running normal mode code when SMI handling starts. This will\r
  //   be TRUE even if a blocked CPU is brought out of the blocked state by a normal mode CPU (before the normal mode CPU received the\r
  //   SMI IPI), because with a buffered SMI, and CPU will enter SMM immediately after it is brought out of the blocked state.\r
  // - The timeout value must be longer than longest possible IO operation in the system\r
  //\r
\r
  //\r
  // Sync with APs 1st timeout\r
  //\r
  for (Timer = StartSyncTimer ();\r
       !IsSyncTimerTimeout (Timer) &&\r
       !AllCpusInSmmWithExceptions (ARRIVAL_EXCEPTION_BLOCKED | ARRIVAL_EXCEPTION_SMI_DISABLED );\r
       ) {\r
    CpuPause ();\r
  }\r
\r
  //\r
  // Not all APs have arrived, so we need 2nd round of timeout. IPIs should be sent to ALL none present APs,\r
  // because:\r
  // a) Delayed AP may have just come out of the delayed state. Blocked AP may have just been brought out of blocked state by some AP running\r
  //    normal mode code. These APs need to be guaranteed to have an SMI pending to insure that once they are out of delayed / blocked state, they\r
  //    enter SMI immediately without executing instructions in normal mode. Note traditional flow requires there are no APs doing normal mode\r
  //    work while SMI handling is on-going.\r
  // b) As a consequence of SMI IPI sending, (spurious) SMI may occur after this SMM run.\r
  // c) ** NOTE **: Use SMI disabling feature VERY CAREFULLY (if at all) for traditional flow, because a processor in SMI-disabled state\r
  //    will execute normal mode code, which breaks the traditional SMI handlers' assumption that no APs are doing normal\r
  //    mode work while SMI handling is on-going.\r
  // d) We don't add code to check SMI disabling status to skip sending IPI to SMI disabled APs, because:\r
  //    - In traditional flow, SMI disabling is discouraged.\r
  //    - In relaxed flow, CheckApArrival() will check SMI disabling status before calling this function.\r
  //    In both cases, adding SMI-disabling checking code increases overhead.\r
  //\r
  if (*mSmmMpSyncData->Counter < mNumberOfCpus) {\r
    //\r
    // Send SMI IPIs to bring outside processors in\r
    //\r
    for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
      if (!(*(mSmmMpSyncData->CpuData[Index].Present)) && gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId != INVALID_APIC_ID) {\r
        SendSmiIpi ((UINT32)gSmmCpuPrivate->ProcessorInfo[Index].ProcessorId);\r
      }\r
    }\r
\r
    //\r
    // Sync with APs 2nd timeout.\r
    //\r
    for (Timer = StartSyncTimer ();\r
         !IsSyncTimerTimeout (Timer) &&\r
         !AllCpusInSmmWithExceptions (ARRIVAL_EXCEPTION_BLOCKED | ARRIVAL_EXCEPTION_SMI_DISABLED );\r
         ) {\r
      CpuPause ();\r
    }\r
  }\r
\r
  return;\r
}\r
\r
\r
/**\r
  Replace OS MTRR's with SMI MTRR's.\r
\r
  @param    CpuIndex             Processor Index\r
\r
**/\r
VOID\r
ReplaceOSMtrrs (\r
  IN      UINTN                     CpuIndex\r
  )\r
{\r
  PROCESSOR_SMM_DESCRIPTOR       *Psd;\r
  UINT64                         *SmiMtrrs;\r
  MTRR_SETTINGS                  *BiosMtrr;\r
\r
  Psd = (PROCESSOR_SMM_DESCRIPTOR*)(mCpuHotPlugData.SmBase[CpuIndex] + SMM_PSD_OFFSET);\r
  SmiMtrrs = (UINT64*)(UINTN)Psd->MtrrBaseMaskPtr;\r
\r
  SmmCpuFeaturesDisableSmrr ();\r
\r
  //\r
  // Replace all MTRRs registers\r
  //\r
  BiosMtrr  = (MTRR_SETTINGS*)SmiMtrrs;\r
  MtrrSetAllMtrrs(BiosMtrr);\r
}\r
\r
/**\r
  SMI handler for BSP.\r
\r
  @param     CpuIndex         BSP processor Index\r
  @param     SyncMode         SMM MP sync mode\r
\r
**/\r
VOID\r
BSPHandler (\r
  IN      UINTN                     CpuIndex,\r
  IN      SMM_CPU_SYNC_MODE         SyncMode\r
  )\r
{\r
  UINTN                             Index;\r
  MTRR_SETTINGS                     Mtrrs;\r
  UINTN                             ApCount;\r
  BOOLEAN                           ClearTopLevelSmiResult;\r
  UINTN                             PresentCount;\r
\r
  ASSERT (CpuIndex == mSmmMpSyncData->BspIndex);\r
  ApCount = 0;\r
\r
  //\r
  // Flag BSP's presence\r
  //\r
  *mSmmMpSyncData->InsideSmm = TRUE;\r
\r
  //\r
  // Initialize Debug Agent to start source level debug in BSP handler\r
  //\r
  InitializeDebugAgent (DEBUG_AGENT_INIT_ENTER_SMI, NULL, NULL);\r
\r
  //\r
  // Mark this processor's presence\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = TRUE;\r
\r
  //\r
  // Clear platform top level SMI status bit before calling SMI handlers. If\r
  // we cleared it after SMI handlers are run, we would miss the SMI that\r
  // occurs after SMI handlers are done and before SMI status bit is cleared.\r
  //\r
  ClearTopLevelSmiResult = ClearTopLevelSmiStatus();\r
  ASSERT (ClearTopLevelSmiResult == TRUE);\r
\r
  //\r
  // Set running processor index\r
  //\r
  gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu = CpuIndex;\r
\r
  //\r
  // If Traditional Sync Mode or need to configure MTRRs: gather all available APs.\r
  //\r
  if (SyncMode == SmmCpuSyncModeTradition || SmmCpuFeaturesNeedConfigureMtrrs()) {\r
\r
    //\r
    // Wait for APs to arrive\r
    //\r
    SmmWaitForApArrival();\r
\r
    //\r
    // Lock the counter down and retrieve the number of APs\r
    //\r
    *mSmmMpSyncData->AllCpusInSync = TRUE;\r
    ApCount = LockdownSemaphore (mSmmMpSyncData->Counter) - 1;\r
\r
    //\r
    // Wait for all APs to get ready for programming MTRRs\r
    //\r
    WaitForAllAPs (ApCount);\r
\r
    if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
      //\r
      // Signal all APs it's time for backup MTRRs\r
      //\r
      ReleaseAllAPs ();\r
\r
      //\r
      // WaitForSemaphore() may wait for ever if an AP happens to enter SMM at\r
      // exactly this point. Please make sure PcdCpuSmmMaxSyncLoops has been set\r
      // to a large enough value to avoid this situation.\r
      // Note: For HT capable CPUs, threads within a core share the same set of MTRRs.\r
      // We do the backup first and then set MTRR to avoid race condition for threads\r
      // in the same core.\r
      //\r
      MtrrGetAllMtrrs(&Mtrrs);\r
\r
      //\r
      // Wait for all APs to complete their MTRR saving\r
      //\r
      WaitForAllAPs (ApCount);\r
\r
      //\r
      // Let all processors program SMM MTRRs together\r
      //\r
      ReleaseAllAPs ();\r
\r
      //\r
      // WaitForSemaphore() may wait for ever if an AP happens to enter SMM at\r
      // exactly this point. Please make sure PcdCpuSmmMaxSyncLoops has been set\r
      // to a large enough value to avoid this situation.\r
      //\r
      ReplaceOSMtrrs (CpuIndex);\r
\r
      //\r
      // Wait for all APs to complete their MTRR programming\r
      //\r
      WaitForAllAPs (ApCount);\r
    }\r
  }\r
\r
  //\r
  // The BUSY lock is initialized to Acquired state\r
  //\r
  AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
\r
  //\r
  // Perform the pre tasks\r
  //\r
  PerformPreTasks ();\r
\r
  //\r
  // Invoke SMM Foundation EntryPoint with the processor information context.\r
  //\r
  gSmmCpuPrivate->SmmCoreEntry (&gSmmCpuPrivate->SmmCoreEntryContext);\r
\r
  //\r
  // Make sure all APs have completed their pending none-block tasks\r
  //\r
  for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
    if (Index != CpuIndex && *(mSmmMpSyncData->CpuData[Index].Present)) {\r
      AcquireSpinLock (mSmmMpSyncData->CpuData[Index].Busy);\r
      ReleaseSpinLock (mSmmMpSyncData->CpuData[Index].Busy);\r
    }\r
  }\r
\r
  //\r
  // Perform the remaining tasks\r
  //\r
  PerformRemainingTasks ();\r
\r
  //\r
  // If Relaxed-AP Sync Mode: gather all available APs after BSP SMM handlers are done, and\r
  // make those APs to exit SMI synchronously. APs which arrive later will be excluded and\r
  // will run through freely.\r
  //\r
  if (SyncMode != SmmCpuSyncModeTradition && !SmmCpuFeaturesNeedConfigureMtrrs()) {\r
\r
    //\r
    // Lock the counter down and retrieve the number of APs\r
    //\r
    *mSmmMpSyncData->AllCpusInSync = TRUE;\r
    ApCount = LockdownSemaphore (mSmmMpSyncData->Counter) - 1;\r
    //\r
    // Make sure all APs have their Present flag set\r
    //\r
    while (TRUE) {\r
      PresentCount = 0;\r
      for (Index = mMaxNumberOfCpus; Index-- > 0;) {\r
        if (*(mSmmMpSyncData->CpuData[Index].Present)) {\r
          PresentCount ++;\r
        }\r
      }\r
      if (PresentCount > ApCount) {\r
        break;\r
      }\r
    }\r
  }\r
\r
  //\r
  // Notify all APs to exit\r
  //\r
  *mSmmMpSyncData->InsideSmm = FALSE;\r
  ReleaseAllAPs ();\r
\r
  //\r
  // Wait for all APs to complete their pending tasks\r
  //\r
  WaitForAllAPs (ApCount);\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Signal APs to restore MTRRs\r
    //\r
    ReleaseAllAPs ();\r
\r
    //\r
    // Restore OS MTRRs\r
    //\r
    SmmCpuFeaturesReenableSmrr ();\r
    MtrrSetAllMtrrs(&Mtrrs);\r
\r
    //\r
    // Wait for all APs to complete MTRR programming\r
    //\r
    WaitForAllAPs (ApCount);\r
  }\r
\r
  //\r
  // Stop source level debug in BSP handler, the code below will not be\r
  // debugged.\r
  //\r
  InitializeDebugAgent (DEBUG_AGENT_INIT_EXIT_SMI, NULL, NULL);\r
\r
  //\r
  // Signal APs to Reset states/semaphore for this processor\r
  //\r
  ReleaseAllAPs ();\r
\r
  //\r
  // Perform pending operations for hot-plug\r
  //\r
  SmmCpuUpdate ();\r
\r
  //\r
  // Clear the Present flag of BSP\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = FALSE;\r
\r
  //\r
  // Gather APs to exit SMM synchronously. Note the Present flag is cleared by now but\r
  // WaitForAllAps does not depend on the Present flag.\r
  //\r
  WaitForAllAPs (ApCount);\r
\r
  //\r
  // Reset BspIndex to -1, meaning BSP has not been elected.\r
  //\r
  if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
    mSmmMpSyncData->BspIndex = (UINT32)-1;\r
  }\r
\r
  //\r
  // Allow APs to check in from this point on\r
  //\r
  *mSmmMpSyncData->Counter = 0;\r
  *mSmmMpSyncData->AllCpusInSync = FALSE;\r
}\r
\r
/**\r
  SMI handler for AP.\r
\r
  @param     CpuIndex         AP processor Index.\r
  @param     ValidSmi         Indicates that current SMI is a valid SMI or not.\r
  @param     SyncMode         SMM MP sync mode.\r
\r
**/\r
VOID\r
APHandler (\r
  IN      UINTN                     CpuIndex,\r
  IN      BOOLEAN                   ValidSmi,\r
  IN      SMM_CPU_SYNC_MODE         SyncMode\r
  )\r
{\r
  UINT64                            Timer;\r
  UINTN                             BspIndex;\r
  MTRR_SETTINGS                     Mtrrs;\r
\r
  //\r
  // Timeout BSP\r
  //\r
  for (Timer = StartSyncTimer ();\r
       !IsSyncTimerTimeout (Timer) &&\r
       !(*mSmmMpSyncData->InsideSmm);\r
       ) {\r
    CpuPause ();\r
  }\r
\r
  if (!(*mSmmMpSyncData->InsideSmm)) {\r
    //\r
    // BSP timeout in the first round\r
    //\r
    if (mSmmMpSyncData->BspIndex != -1) {\r
      //\r
      // BSP Index is known\r
      //\r
      BspIndex = mSmmMpSyncData->BspIndex;\r
      ASSERT (CpuIndex != BspIndex);\r
\r
      //\r
      // Send SMI IPI to bring BSP in\r
      //\r
      SendSmiIpi ((UINT32)gSmmCpuPrivate->ProcessorInfo[BspIndex].ProcessorId);\r
\r
      //\r
      // Now clock BSP for the 2nd time\r
      //\r
      for (Timer = StartSyncTimer ();\r
           !IsSyncTimerTimeout (Timer) &&\r
           !(*mSmmMpSyncData->InsideSmm);\r
           ) {\r
        CpuPause ();\r
      }\r
\r
      if (!(*mSmmMpSyncData->InsideSmm)) {\r
        //\r
        // Give up since BSP is unable to enter SMM\r
        // and signal the completion of this AP\r
        WaitForSemaphore (mSmmMpSyncData->Counter);\r
        return;\r
      }\r
    } else {\r
      //\r
      // Don't know BSP index. Give up without sending IPI to BSP.\r
      //\r
      WaitForSemaphore (mSmmMpSyncData->Counter);\r
      return;\r
    }\r
  }\r
\r
  //\r
  // BSP is available\r
  //\r
  BspIndex = mSmmMpSyncData->BspIndex;\r
  ASSERT (CpuIndex != BspIndex);\r
\r
  //\r
  // Mark this processor's presence\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = TRUE;\r
\r
  if (SyncMode == SmmCpuSyncModeTradition || SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Notify BSP of arrival at this point\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Wait for the signal from BSP to backup MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Backup OS MTRRs\r
    //\r
    MtrrGetAllMtrrs(&Mtrrs);\r
\r
    //\r
    // Signal BSP the completion of this AP\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
    //\r
    // Wait for BSP's signal to program MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Replace OS MTRRs with SMI MTRRs\r
    //\r
    ReplaceOSMtrrs (CpuIndex);\r
\r
    //\r
    // Signal BSP the completion of this AP\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
  }\r
\r
  while (TRUE) {\r
    //\r
    // Wait for something to happen\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Check if BSP wants to exit SMM\r
    //\r
    if (!(*mSmmMpSyncData->InsideSmm)) {\r
      break;\r
    }\r
\r
    //\r
    // BUSY should be acquired by SmmStartupThisAp()\r
    //\r
    ASSERT (\r
      !AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy)\r
      );\r
\r
    //\r
    // Invoke the scheduled procedure\r
    //\r
    (*mSmmMpSyncData->CpuData[CpuIndex].Procedure) (\r
      (VOID*)mSmmMpSyncData->CpuData[CpuIndex].Parameter\r
      );\r
\r
    //\r
    // Release BUSY\r
    //\r
    ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
  }\r
\r
  if (SmmCpuFeaturesNeedConfigureMtrrs()) {\r
    //\r
    // Notify BSP the readiness of this AP to program MTRRs\r
    //\r
    ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
    //\r
    // Wait for the signal from BSP to program MTRRs\r
    //\r
    WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
    //\r
    // Restore OS MTRRs\r
    //\r
    SmmCpuFeaturesReenableSmrr ();\r
    MtrrSetAllMtrrs(&Mtrrs);\r
  }\r
\r
  //\r
  // Notify BSP the readiness of this AP to Reset states/semaphore for this processor\r
  //\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
  //\r
  // Wait for the signal from BSP to Reset states/semaphore for this processor\r
  //\r
  WaitForSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
  //\r
  // Reset states/semaphore for this processor\r
  //\r
  *(mSmmMpSyncData->CpuData[CpuIndex].Present) = FALSE;\r
\r
  //\r
  // Notify BSP the readiness of this AP to exit SMM\r
  //\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[BspIndex].Run);\r
\r
}\r
\r
/**\r
  Create 4G PageTable in SMRAM.\r
\r
  @param[in]      Is32BitPageTable Whether the page table is 32-bit PAE\r
  @return         PageTable Address\r
\r
**/\r
UINT32\r
Gen4GPageTable (\r
  IN      BOOLEAN                   Is32BitPageTable\r
  )\r
{\r
  VOID    *PageTable;\r
  UINTN   Index;\r
  UINT64  *Pte;\r
  UINTN   PagesNeeded;\r
  UINTN   Low2MBoundary;\r
  UINTN   High2MBoundary;\r
  UINTN   Pages;\r
  UINTN   GuardPage;\r
  UINT64  *Pdpte;\r
  UINTN   PageIndex;\r
  UINTN   PageAddress;\r
\r
  Low2MBoundary = 0;\r
  High2MBoundary = 0;\r
  PagesNeeded = 0;\r
  if (FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    //\r
    // Add one more page for known good stack, then find the lower 2MB aligned address.\r
    //\r
    Low2MBoundary = (mSmmStackArrayBase + EFI_PAGE_SIZE) & ~(SIZE_2MB-1);\r
    //\r
    // Add two more pages for known good stack and stack guard page,\r
    // then find the lower 2MB aligned address.\r
    //\r
    High2MBoundary = (mSmmStackArrayEnd - mSmmStackSize + EFI_PAGE_SIZE * 2) & ~(SIZE_2MB-1);\r
    PagesNeeded = ((High2MBoundary - Low2MBoundary) / SIZE_2MB) + 1;\r
  }\r
  //\r
  // Allocate the page table\r
  //\r
  PageTable = AllocatePageTableMemory (5 + PagesNeeded);\r
  ASSERT (PageTable != NULL);\r
\r
  PageTable = (VOID *)((UINTN)PageTable);\r
  Pte = (UINT64*)PageTable;\r
\r
  //\r
  // Zero out all page table entries first\r
  //\r
  ZeroMem (Pte, EFI_PAGES_TO_SIZE (1));\r
\r
  //\r
  // Set Page Directory Pointers\r
  //\r
  for (Index = 0; Index < 4; Index++) {\r
    Pte[Index] = (UINTN)PageTable + EFI_PAGE_SIZE * (Index + 1) + (Is32BitPageTable ? IA32_PAE_PDPTE_ATTRIBUTE_BITS : PAGE_ATTRIBUTE_BITS);\r
  }\r
  Pte += EFI_PAGE_SIZE / sizeof (*Pte);\r
\r
  //\r
  // Fill in Page Directory Entries\r
  //\r
  for (Index = 0; Index < EFI_PAGE_SIZE * 4 / sizeof (*Pte); Index++) {\r
    Pte[Index] = (Index << 21) | IA32_PG_PS | PAGE_ATTRIBUTE_BITS;\r
  }\r
\r
  if (FeaturePcdGet (PcdCpuSmmStackGuard)) {\r
    Pages = (UINTN)PageTable + EFI_PAGES_TO_SIZE (5);\r
    GuardPage = mSmmStackArrayBase + EFI_PAGE_SIZE;\r
    Pdpte = (UINT64*)PageTable;\r
    for (PageIndex = Low2MBoundary; PageIndex <= High2MBoundary; PageIndex += SIZE_2MB) {\r
      Pte = (UINT64*)(UINTN)(Pdpte[BitFieldRead32 ((UINT32)PageIndex, 30, 31)] & ~(EFI_PAGE_SIZE - 1));\r
      Pte[BitFieldRead32 ((UINT32)PageIndex, 21, 29)] = (UINT64)Pages | PAGE_ATTRIBUTE_BITS;\r
      //\r
      // Fill in Page Table Entries\r
      //\r
      Pte = (UINT64*)Pages;\r
      PageAddress = PageIndex;\r
      for (Index = 0; Index < EFI_PAGE_SIZE / sizeof (*Pte); Index++) {\r
        if (PageAddress == GuardPage) {\r
          //\r
          // Mark the guard page as non-present\r
          //\r
          Pte[Index] = PageAddress;\r
          GuardPage += mSmmStackSize;\r
          if (GuardPage > mSmmStackArrayEnd) {\r
            GuardPage = 0;\r
          }\r
        } else {\r
          Pte[Index] = PageAddress | PAGE_ATTRIBUTE_BITS;\r
        }\r
        PageAddress+= EFI_PAGE_SIZE;\r
      }\r
      Pages += EFI_PAGE_SIZE;\r
    }\r
  }\r
\r
  return (UINT32)(UINTN)PageTable;\r
}\r
\r
/**\r
  Set memory cache ability.\r
\r
  @param    PageTable              PageTable Address\r
  @param    Address                Memory Address to change cache ability\r
  @param    Cacheability           Cache ability to set\r
\r
**/\r
VOID\r
SetCacheability (\r
  IN      UINT64                    *PageTable,\r
  IN      UINTN                     Address,\r
  IN      UINT8                     Cacheability\r
  )\r
{\r
  UINTN   PTIndex;\r
  VOID    *NewPageTableAddress;\r
  UINT64  *NewPageTable;\r
  UINTN   Index;\r
\r
  ASSERT ((Address & EFI_PAGE_MASK) == 0);\r
\r
  if (sizeof (UINTN) == sizeof (UINT64)) {\r
    PTIndex = (UINTN)RShiftU64 (Address, 39) & 0x1ff;\r
    ASSERT (PageTable[PTIndex] & IA32_PG_P);\r
    PageTable = (UINT64*)(UINTN)(PageTable[PTIndex] & gPhyMask);\r
  }\r
\r
  PTIndex = (UINTN)RShiftU64 (Address, 30) & 0x1ff;\r
  ASSERT (PageTable[PTIndex] & IA32_PG_P);\r
  PageTable = (UINT64*)(UINTN)(PageTable[PTIndex] & gPhyMask);\r
\r
  //\r
  // A perfect implementation should check the original cacheability with the\r
  // one being set, and break a 2M page entry into pieces only when they\r
  // disagreed.\r
  //\r
  PTIndex = (UINTN)RShiftU64 (Address, 21) & 0x1ff;\r
  if ((PageTable[PTIndex] & IA32_PG_PS) != 0) {\r
    //\r
    // Allocate a page from SMRAM\r
    //\r
    NewPageTableAddress = AllocatePageTableMemory (1);\r
    ASSERT (NewPageTableAddress != NULL);\r
\r
    NewPageTable = (UINT64 *)NewPageTableAddress;\r
\r
    for (Index = 0; Index < 0x200; Index++) {\r
      NewPageTable[Index] = PageTable[PTIndex];\r
      if ((NewPageTable[Index] & IA32_PG_PAT_2M) != 0) {\r
        NewPageTable[Index] &= ~((UINT64)IA32_PG_PAT_2M);\r
        NewPageTable[Index] |= (UINT64)IA32_PG_PAT_4K;\r
      }\r
      NewPageTable[Index] |= (UINT64)(Index << EFI_PAGE_SHIFT);\r
    }\r
\r
    PageTable[PTIndex] = ((UINTN)NewPageTableAddress & gPhyMask) | PAGE_ATTRIBUTE_BITS;\r
  }\r
\r
  ASSERT (PageTable[PTIndex] & IA32_PG_P);\r
  PageTable = (UINT64*)(UINTN)(PageTable[PTIndex] & gPhyMask);\r
\r
  PTIndex = (UINTN)RShiftU64 (Address, 12) & 0x1ff;\r
  ASSERT (PageTable[PTIndex] & IA32_PG_P);\r
  PageTable[PTIndex] &= ~((UINT64)((IA32_PG_PAT_4K | IA32_PG_CD | IA32_PG_WT)));\r
  PageTable[PTIndex] |= (UINT64)Cacheability;\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU.\r
\r
  @param[in]       Procedure                The address of the procedure to run\r
  @param[in]       CpuIndex                 Target CPU Index\r
  @param[in, OUT]  ProcArguments            The parameter to pass to the procedure\r
  @param[in]       BlockingMode             Startup AP in blocking mode or not\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
InternalSmmStartupThisAp (\r
  IN      EFI_AP_PROCEDURE          Procedure,\r
  IN      UINTN                     CpuIndex,\r
  IN OUT  VOID                      *ProcArguments OPTIONAL,\r
  IN      BOOLEAN                   BlockingMode\r
  )\r
{\r
  if (CpuIndex >= gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus) {\r
    DEBUG((DEBUG_ERROR, "CpuIndex(%d) >= gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus(%d)\n", CpuIndex, gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus));\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (CpuIndex == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu) {\r
    DEBUG((DEBUG_ERROR, "CpuIndex(%d) == gSmmCpuPrivate->SmmCoreEntryContext.CurrentlyExecutingCpu\n", CpuIndex));\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (!(*(mSmmMpSyncData->CpuData[CpuIndex].Present))) {\r
    if (mSmmMpSyncData->EffectiveSyncMode == SmmCpuSyncModeTradition) {\r
      DEBUG((DEBUG_ERROR, "!mSmmMpSyncData->CpuData[%d].Present\n", CpuIndex));\r
    }\r
    return EFI_INVALID_PARAMETER;\r
  }\r
  if (gSmmCpuPrivate->Operation[CpuIndex] == SmmCpuRemove) {\r
    if (!FeaturePcdGet (PcdCpuHotPlugSupport)) {\r
      DEBUG((DEBUG_ERROR, "gSmmCpuPrivate->Operation[%d] == SmmCpuRemove\n", CpuIndex));\r
    }\r
    return EFI_INVALID_PARAMETER;\r
  }\r
\r
  if (BlockingMode) {\r
    AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
  } else {\r
    if (!AcquireSpinLockOrFail (mSmmMpSyncData->CpuData[CpuIndex].Busy)) {\r
      DEBUG((DEBUG_ERROR, "mSmmMpSyncData->CpuData[%d].Busy\n", CpuIndex));\r
      return EFI_INVALID_PARAMETER;\r
    }\r
  }\r
\r
  mSmmMpSyncData->CpuData[CpuIndex].Procedure = Procedure;\r
  mSmmMpSyncData->CpuData[CpuIndex].Parameter = ProcArguments;\r
  ReleaseSemaphore (mSmmMpSyncData->CpuData[CpuIndex].Run);\r
\r
  if (BlockingMode) {\r
    AcquireSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
    ReleaseSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
  }\r
  return EFI_SUCCESS;\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU in blocking mode.\r
\r
  @param[in]       Procedure                The address of the procedure to run\r
  @param[in]       CpuIndex                 Target CPU Index\r
  @param[in, out]  ProcArguments            The parameter to pass to the procedure\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmBlockingStartupThisAp (\r
  IN      EFI_AP_PROCEDURE          Procedure,\r
  IN      UINTN                     CpuIndex,\r
  IN OUT  VOID                      *ProcArguments OPTIONAL\r
  )\r
{\r
  return InternalSmmStartupThisAp(Procedure, CpuIndex, ProcArguments, TRUE);\r
}\r
\r
/**\r
  Schedule a procedure to run on the specified CPU.\r
\r
  @param  Procedure                The address of the procedure to run\r
  @param  CpuIndex                 Target CPU Index\r
  @param  ProcArguments            The parameter to pass to the procedure\r
\r
  @retval EFI_INVALID_PARAMETER    CpuNumber not valid\r
  @retval EFI_INVALID_PARAMETER    CpuNumber specifying BSP\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber did not enter SMM\r
  @retval EFI_INVALID_PARAMETER    The AP specified by CpuNumber is busy\r
  @retval EFI_SUCCESS              The procedure has been successfully scheduled\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
SmmStartupThisAp (\r
  IN      EFI_AP_PROCEDURE          Procedure,\r
  IN      UINTN                     CpuIndex,\r
  IN OUT  VOID                      *ProcArguments OPTIONAL\r
  )\r
{\r
  return InternalSmmStartupThisAp(Procedure, CpuIndex, ProcArguments, FeaturePcdGet (PcdCpuSmmBlockStartupThisAp));\r
}\r
\r
/**\r
  This function sets DR6 & DR7 according to SMM save state, before running SMM C code.\r
  They are useful when you want to enable hardware breakpoints in SMM without entry SMM mode.\r
\r
  NOTE: It might not be appreciated in runtime since it might\r
        conflict with OS debugging facilities. Turn them off in RELEASE.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
CpuSmmDebugEntry (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
  SMRAM_SAVE_STATE_MAP *CpuSaveState;\r
  \r
  if (FeaturePcdGet (PcdCpuSmmDebug)) {\r
    ASSERT(CpuIndex < mMaxNumberOfCpus);\r
    CpuSaveState = (SMRAM_SAVE_STATE_MAP *)gSmmCpuPrivate->CpuSaveState[CpuIndex];\r
    if (mSmmSaveStateRegisterLma == EFI_SMM_SAVE_STATE_REGISTER_LMA_32BIT) {\r
      AsmWriteDr6 (CpuSaveState->x86._DR6);\r
      AsmWriteDr7 (CpuSaveState->x86._DR7);\r
    } else {\r
      AsmWriteDr6 ((UINTN)CpuSaveState->x64._DR6);\r
      AsmWriteDr7 ((UINTN)CpuSaveState->x64._DR7);\r
    }\r
  }\r
}\r
\r
/**\r
  This function restores DR6 & DR7 to SMM save state.\r
\r
  NOTE: It might not be appreciated in runtime since it might\r
        conflict with OS debugging facilities. Turn them off in RELEASE.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
CpuSmmDebugExit (\r
  IN UINTN  CpuIndex\r
  )\r
{\r
  SMRAM_SAVE_STATE_MAP *CpuSaveState;\r
\r
  if (FeaturePcdGet (PcdCpuSmmDebug)) {\r
    ASSERT(CpuIndex < mMaxNumberOfCpus);\r
    CpuSaveState = (SMRAM_SAVE_STATE_MAP *)gSmmCpuPrivate->CpuSaveState[CpuIndex];\r
    if (mSmmSaveStateRegisterLma == EFI_SMM_SAVE_STATE_REGISTER_LMA_32BIT) {\r
      CpuSaveState->x86._DR7 = (UINT32)AsmReadDr7 ();\r
      CpuSaveState->x86._DR6 = (UINT32)AsmReadDr6 ();\r
    } else {\r
      CpuSaveState->x64._DR7 = AsmReadDr7 ();\r
      CpuSaveState->x64._DR6 = AsmReadDr6 ();\r
    }\r
  }\r
}\r
\r
/**\r
  C function for SMI entry, each processor comes here upon SMI trigger.\r
\r
  @param    CpuIndex              CPU Index\r
\r
**/\r
VOID\r
EFIAPI\r
SmiRendezvous (\r
  IN      UINTN                     CpuIndex\r
  )\r
{\r
  EFI_STATUS                     Status;\r
  BOOLEAN                        ValidSmi;\r
  BOOLEAN                        IsBsp;\r
  BOOLEAN                        BspInProgress;\r
  UINTN                          Index;\r
  UINTN                          Cr2;\r
\r
  ASSERT(CpuIndex < mMaxNumberOfCpus);\r
\r
  //\r
  // Save Cr2 because Page Fault exception in SMM may override its value\r
  //\r
  Cr2 = AsmReadCr2 ();\r
\r
  //\r
  // Perform CPU specific entry hooks\r
  //\r
  SmmCpuFeaturesRendezvousEntry (CpuIndex);\r
\r
  //\r
  // Determine if this is a valid SMI\r
  //\r
  ValidSmi = PlatformValidSmi();\r
\r
  //\r
  // Determine if BSP has been already in progress. Note this must be checked after\r
  // ValidSmi because BSP may clear a valid SMI source after checking in.\r
  //\r
  BspInProgress = *mSmmMpSyncData->InsideSmm;\r
\r
  if (!BspInProgress && !ValidSmi) {\r
    //\r
    // If we reach here, it means when we sampled the ValidSmi flag, SMI status had not\r
    // been cleared by BSP in a new SMI run (so we have a truly invalid SMI), or SMI\r
    // status had been cleared by BSP and an existing SMI run has almost ended. (Note\r
    // we sampled ValidSmi flag BEFORE judging BSP-in-progress status.) In both cases, there\r
    // is nothing we need to do.\r
    //\r
    goto Exit;\r
  } else {\r
    //\r
    // Signal presence of this processor\r
    //\r
    if (ReleaseSemaphore (mSmmMpSyncData->Counter) == 0) {\r
      //\r
      // BSP has already ended the synchronization, so QUIT!!!\r
      //\r
\r
      //\r
      // Wait for BSP's signal to finish SMI\r
      //\r
      while (*mSmmMpSyncData->AllCpusInSync) {\r
        CpuPause ();\r
      }\r
      goto Exit;\r
    } else {\r
\r
      //\r
      // The BUSY lock is initialized to Released state.\r
      // This needs to be done early enough to be ready for BSP's SmmStartupThisAp() call.\r
      // E.g., with Relaxed AP flow, SmmStartupThisAp() may be called immediately\r
      // after AP's present flag is detected.\r
      //\r
      InitializeSpinLock (mSmmMpSyncData->CpuData[CpuIndex].Busy);\r
    }\r
\r
    if (FeaturePcdGet (PcdCpuSmmProfileEnable)) {\r
      ActivateSmmProfile (CpuIndex);\r
    }\r
\r
    if (BspInProgress) {\r
      //\r
      // BSP has been elected. Follow AP path, regardless of ValidSmi flag\r
      // as BSP may have cleared the SMI status\r
      //\r
      APHandler (CpuIndex, ValidSmi, mSmmMpSyncData->EffectiveSyncMode);\r
    } else {\r
      //\r
      // We have a valid SMI\r
      //\r
\r
      //\r
      // Elect BSP\r
      //\r
      IsBsp = FALSE;\r
      if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
        if (!mSmmMpSyncData->SwitchBsp || mSmmMpSyncData->CandidateBsp[CpuIndex]) {\r
          //\r
          // Call platform hook to do BSP election\r
          //\r
          Status = PlatformSmmBspElection (&IsBsp);\r
          if (EFI_SUCCESS == Status) {\r
            //\r
            // Platform hook determines successfully\r
            //\r
            if (IsBsp) {\r
              mSmmMpSyncData->BspIndex = (UINT32)CpuIndex;\r
            }\r
          } else {\r
            //\r
            // Platform hook fails to determine, use default BSP election method\r
            //\r
            InterlockedCompareExchange32 (\r
              (UINT32*)&mSmmMpSyncData->BspIndex,\r
              (UINT32)-1,\r
              (UINT32)CpuIndex\r
              );\r
          }\r
        }\r
      }\r
\r
      //\r
      // "mSmmMpSyncData->BspIndex == CpuIndex" means this is the BSP\r
      //\r
      if (mSmmMpSyncData->BspIndex == CpuIndex) {\r
\r
        //\r
        // Clear last request for SwitchBsp.\r
        //\r
        if (mSmmMpSyncData->SwitchBsp) {\r
          mSmmMpSyncData->SwitchBsp = FALSE;\r
          for (Index = 0; Index < mMaxNumberOfCpus; Index++) {\r
            mSmmMpSyncData->CandidateBsp[Index] = FALSE;\r
          }\r
        }\r
\r
        if (FeaturePcdGet (PcdCpuSmmProfileEnable)) {\r
          SmmProfileRecordSmiNum ();\r
        }\r
\r
        //\r
        // BSP Handler is always called with a ValidSmi == TRUE\r
        //\r
        BSPHandler (CpuIndex, mSmmMpSyncData->EffectiveSyncMode);\r
      } else {\r
        APHandler (CpuIndex, ValidSmi, mSmmMpSyncData->EffectiveSyncMode);\r
      }\r
    }\r
\r
    ASSERT (*mSmmMpSyncData->CpuData[CpuIndex].Run == 0);\r
\r
    //\r
    // Wait for BSP's signal to exit SMI\r
    //\r
    while (*mSmmMpSyncData->AllCpusInSync) {\r
      CpuPause ();\r
    }\r
  }\r
\r
Exit:\r
  SmmCpuFeaturesRendezvousExit (CpuIndex);\r
  //\r
  // Restore Cr2\r
  //\r
  AsmWriteCr2 (Cr2);\r
}\r
\r
/**\r
  Allocate buffer for all semaphores and spin locks.\r
\r
**/\r
VOID\r
InitializeSmmCpuSemaphores (\r
  VOID\r
  )\r
{\r
  UINTN                      ProcessorCount;\r
  UINTN                      TotalSize;\r
  UINTN                      GlobalSemaphoresSize;\r
  UINTN                      CpuSemaphoresSize;\r
  UINTN                      MsrSemahporeSize;\r
  UINTN                      SemaphoreSize;\r
  UINTN                      Pages;\r
  UINTN                      *SemaphoreBlock;\r
  UINTN                      SemaphoreAddr;\r
\r
  SemaphoreSize   = GetSpinLockProperties ();\r
  ProcessorCount = gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
  GlobalSemaphoresSize = (sizeof (SMM_CPU_SEMAPHORE_GLOBAL) / sizeof (VOID *)) * SemaphoreSize;\r
  CpuSemaphoresSize    = (sizeof (SMM_CPU_SEMAPHORE_CPU) / sizeof (VOID *)) * ProcessorCount * SemaphoreSize;\r
  MsrSemahporeSize     = MSR_SPIN_LOCK_INIT_NUM * SemaphoreSize;\r
  TotalSize = GlobalSemaphoresSize + CpuSemaphoresSize + MsrSemahporeSize;\r
  DEBUG((EFI_D_INFO, "One Semaphore Size    = 0x%x\n", SemaphoreSize));\r
  DEBUG((EFI_D_INFO, "Total Semaphores Size = 0x%x\n", TotalSize));\r
  Pages = EFI_SIZE_TO_PAGES (TotalSize);\r
  SemaphoreBlock = AllocatePages (Pages);\r
  ASSERT (SemaphoreBlock != NULL);\r
  ZeroMem (SemaphoreBlock, TotalSize);\r
\r
  SemaphoreAddr = (UINTN)SemaphoreBlock;\r
  mSmmCpuSemaphores.SemaphoreGlobal.Counter       = (UINT32 *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.InsideSmm     = (BOOLEAN *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.AllCpusInSync = (BOOLEAN *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.PFLock        = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.CodeAccessCheckLock\r
                                                  = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreGlobal.MemoryMappedLock\r
                                                  = (SPIN_LOCK *)SemaphoreAddr;\r
\r
  SemaphoreAddr = (UINTN)SemaphoreBlock + GlobalSemaphoresSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Busy    = (SPIN_LOCK *)SemaphoreAddr;\r
  SemaphoreAddr += ProcessorCount * SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Run     = (UINT32 *)SemaphoreAddr;\r
  SemaphoreAddr += ProcessorCount * SemaphoreSize;\r
  mSmmCpuSemaphores.SemaphoreCpu.Present = (BOOLEAN *)SemaphoreAddr;\r
\r
  SemaphoreAddr = (UINTN)SemaphoreBlock + GlobalSemaphoresSize + CpuSemaphoresSize;\r
  mSmmCpuSemaphores.SemaphoreMsr.Msr              = (SPIN_LOCK *)SemaphoreAddr;\r
  mSmmCpuSemaphores.SemaphoreMsr.AvailableCounter =\r
        ((UINTN)SemaphoreBlock + Pages * SIZE_4KB - SemaphoreAddr) / SemaphoreSize;\r
  ASSERT (mSmmCpuSemaphores.SemaphoreMsr.AvailableCounter >= MSR_SPIN_LOCK_INIT_NUM);\r
\r
  mPFLock                       = mSmmCpuSemaphores.SemaphoreGlobal.PFLock;\r
  mConfigSmmCodeAccessCheckLock = mSmmCpuSemaphores.SemaphoreGlobal.CodeAccessCheckLock;\r
  mMemoryMappedLock             = mSmmCpuSemaphores.SemaphoreGlobal.MemoryMappedLock;\r
\r
  mSemaphoreSize = SemaphoreSize;\r
}\r
\r
/**\r
  Initialize un-cacheable data.\r
\r
**/\r
VOID\r
EFIAPI\r
InitializeMpSyncData (\r
  VOID\r
  )\r
{\r
  UINTN                      CpuIndex;\r
\r
  if (mSmmMpSyncData != NULL) {\r
    //\r
    // mSmmMpSyncDataSize includes one structure of SMM_DISPATCHER_MP_SYNC_DATA, one\r
    // CpuData array of SMM_CPU_DATA_BLOCK and one CandidateBsp array of BOOLEAN.\r
    //\r
    ZeroMem (mSmmMpSyncData, mSmmMpSyncDataSize);\r
    mSmmMpSyncData->CpuData = (SMM_CPU_DATA_BLOCK *)((UINT8 *)mSmmMpSyncData + sizeof (SMM_DISPATCHER_MP_SYNC_DATA));\r
    mSmmMpSyncData->CandidateBsp = (BOOLEAN *)(mSmmMpSyncData->CpuData + gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus);\r
    if (FeaturePcdGet (PcdCpuSmmEnableBspElection)) {\r
      //\r
      // Enable BSP election by setting BspIndex to -1\r
      //\r
      mSmmMpSyncData->BspIndex = (UINT32)-1;\r
    }\r
    mSmmMpSyncData->EffectiveSyncMode = (SMM_CPU_SYNC_MODE) PcdGet8 (PcdCpuSmmSyncMode);\r
\r
    mSmmMpSyncData->Counter       = mSmmCpuSemaphores.SemaphoreGlobal.Counter;\r
    mSmmMpSyncData->InsideSmm     = mSmmCpuSemaphores.SemaphoreGlobal.InsideSmm;\r
    mSmmMpSyncData->AllCpusInSync = mSmmCpuSemaphores.SemaphoreGlobal.AllCpusInSync;\r
    ASSERT (mSmmMpSyncData->Counter != NULL && mSmmMpSyncData->InsideSmm != NULL &&\r
            mSmmMpSyncData->AllCpusInSync != NULL);\r
    *mSmmMpSyncData->Counter       = 0;\r
    *mSmmMpSyncData->InsideSmm     = FALSE;\r
    *mSmmMpSyncData->AllCpusInSync = FALSE;\r
\r
    for (CpuIndex = 0; CpuIndex < gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus; CpuIndex ++) {\r
      mSmmMpSyncData->CpuData[CpuIndex].Busy    =\r
        (SPIN_LOCK *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Busy + mSemaphoreSize * CpuIndex);\r
      mSmmMpSyncData->CpuData[CpuIndex].Run     =\r
        (UINT32 *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Run + mSemaphoreSize * CpuIndex);\r
      mSmmMpSyncData->CpuData[CpuIndex].Present =\r
        (BOOLEAN *)((UINTN)mSmmCpuSemaphores.SemaphoreCpu.Present + mSemaphoreSize * CpuIndex);\r
    }\r
  }\r
}\r
\r
/**\r
  Initialize global data for MP synchronization.\r
\r
  @param Stacks       Base address of SMI stack buffer for all processors.\r
  @param StackSize    Stack size for each processor in SMM.\r
\r
**/\r
UINT32\r
InitializeMpServiceData (\r
  IN VOID        *Stacks,\r
  IN UINTN       StackSize\r
  )\r
{\r
  UINT32                    Cr3;\r
  UINTN                     Index;\r
  MTRR_SETTINGS             *Mtrr;\r
  PROCESSOR_SMM_DESCRIPTOR  *Psd;\r
  UINT8                     *GdtTssTables;\r
  UINTN                     GdtTableStepSize;\r
\r
  //\r
  // Allocate memory for all locks and semaphores\r
  //\r
  InitializeSmmCpuSemaphores ();\r
\r
  //\r
  // Initialize mSmmMpSyncData\r
  //\r
  mSmmMpSyncDataSize = sizeof (SMM_DISPATCHER_MP_SYNC_DATA) +\r
                       (sizeof (SMM_CPU_DATA_BLOCK) + sizeof (BOOLEAN)) * gSmmCpuPrivate->SmmCoreEntryContext.NumberOfCpus;\r
  mSmmMpSyncData = (SMM_DISPATCHER_MP_SYNC_DATA*) AllocatePages (EFI_SIZE_TO_PAGES (mSmmMpSyncDataSize));\r
  ASSERT (mSmmMpSyncData != NULL);\r
  InitializeMpSyncData ();\r
\r
  //\r
  // Initialize physical address mask\r
  // NOTE: Physical memory above virtual address limit is not supported !!!\r
  //\r
  AsmCpuid (0x80000008, (UINT32*)&Index, NULL, NULL, NULL);\r
  gPhyMask = LShiftU64 (1, (UINT8)Index) - 1;\r
  gPhyMask &= (1ull << 48) - EFI_PAGE_SIZE;\r
\r
  //\r
  // Create page tables\r
  //\r
  Cr3 = SmmInitPageTable ();\r
\r
  GdtTssTables = InitGdt (Cr3, &GdtTableStepSize);\r
\r
  //\r
  // Initialize PROCESSOR_SMM_DESCRIPTOR for each CPU\r
  //\r
  for (Index = 0; Index < mMaxNumberOfCpus; Index++) {\r
    Psd = (PROCESSOR_SMM_DESCRIPTOR *)(VOID *)(UINTN)(mCpuHotPlugData.SmBase[Index] + SMM_PSD_OFFSET);\r
    CopyMem (Psd, &gcPsd, sizeof (gcPsd));\r
    Psd->SmmGdtPtr = (UINT64)(UINTN)(GdtTssTables + GdtTableStepSize * Index);\r
    Psd->SmmGdtSize = gcSmiGdtr.Limit + 1;\r
\r
    //\r
    // Install SMI handler\r
    //\r
    InstallSmiHandler (\r
      Index,\r
      (UINT32)mCpuHotPlugData.SmBase[Index],\r
      (VOID*)((UINTN)Stacks + (StackSize * Index)),\r
      StackSize,\r
      (UINTN)Psd->SmmGdtPtr,\r
      Psd->SmmGdtSize,\r
      gcSmiIdtr.Base,\r
      gcSmiIdtr.Limit + 1,\r
      Cr3\r
      );\r
  }\r
\r
  //\r
  // Record current MTRR settings\r
  //\r
  ZeroMem(gSmiMtrrs, sizeof (gSmiMtrrs));\r
  Mtrr =  (MTRR_SETTINGS*)gSmiMtrrs;\r
  MtrrGetAllMtrrs (Mtrr);\r
\r
  return Cr3;\r
}\r
\r
/**\r
\r
  Register the SMM Foundation entry point.\r
\r
  @param          This              Pointer to EFI_SMM_CONFIGURATION_PROTOCOL instance\r
  @param          SmmEntryPoint     SMM Foundation EntryPoint\r
\r
  @retval         EFI_SUCCESS       Successfully to register SMM foundation entry point\r
\r
**/\r
EFI_STATUS\r
EFIAPI\r
RegisterSmmEntry (\r
  IN CONST EFI_SMM_CONFIGURATION_PROTOCOL  *This,\r
  IN EFI_SMM_ENTRY_POINT                   SmmEntryPoint\r
  )\r
{\r
  //\r
  // Record SMM Foundation EntryPoint, later invoke it on SMI entry vector.\r
  //\r
  gSmmCpuPrivate->SmmCoreEntry = SmmEntryPoint;\r
  return EFI_SUCCESS;\r
}\r