[mirror_edk2.git] / IntelFrameworkPkg / Include / Protocol / SmmBase.h

/** @file\r
  This file declares SMM Base abstraction protocol.\r
  This protocol is used to install SMM handlers for support of subsequent SMI/PMI activations. This\r
  protocol is available on both IA-32 and Itanium based systems.\r
 \r
  The EFI_SMM_BASE_PROTOCOL is a set of services that is exported by a processor device. It is\r
  a required protocol for the platform processor. This protocol can be used in both boot services and\r
  runtime mode. However, only the following member functions need to exist into runtime:\r
  - InSmm()\r
  - Communicate()\r
  This protocol is responsible for registering the handler services. The order in which the handlers are\r
  executed is prescribed only with respect to the MakeLast flag in the RegisterCallback()\r
  service. The driver exports these registration and unregistration services in boot services mode, but\r
  the registered handlers will execute through the preboot and runtime. The only way to change the\r
  behavior of a registered driver after ExitBootServices() has been invoked is to use some\r
  private communication mechanism with the driver to order it to quiesce. This model permits typical\r
  use cases, such as invoking the handler to enter ACPI mode, where the OS loader would make this\r
  call before boot services are terminated. On the other hand, handlers for services such as chipset\r
  workarounds for the century rollover in CMOS should provide commensurate services throughout\r
  preboot and OS runtime.\r
 \r
  Copyright (c) 2007, Intel Corporation\r
  All rights reserved. This program and the accompanying materials\r
  are licensed and made available under the terms and conditions of the BSD License\r
  which accompanies this distribution.  The full text of the license may be found at\r
  http://opensource.org/licenses/bsd-license.php\r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
  @par Revision Reference:\r
  This Protocol is defined in Framework of EFI SMM Core Interface Spec\r
  Version 0.9.\r
\r
**/\r
\r
#ifndef _SMM_BASE_H_\r
#define _SMM_BASE_H_\r
\r
#include <FrameworkSmm.h>\r
\r
#define EFI_SMM_BASE_PROTOCOL_GUID \\r
  { \\r
    0x1390954D, 0xda95, 0x4227, {0x93, 0x28, 0x72, 0x82, 0xc2, 0x17, 0xda, 0xa8 } \\r
  }\r
\r
typedef struct _EFI_SMM_BASE_PROTOCOL             EFI_SMM_BASE_PROTOCOL;\r
\r
//\r
// SMM Handler Definition\r
//\r
#define EFI_HANDLER_SUCCESS         0x0000\r
#define EFI_HANDLER_CRITICAL_EXIT   0x0001\r
#define EFI_HANDLER_SOURCE_QUIESCED 0x0002\r
#define EFI_HANDLER_SOURCE_PENDING  0x0003\r
\r
/**\r
  Entry Point to Callback service\r
\r
  @param  SmmImageHandle        A handle allocated by the SMM infrastructure code\r
                                to uniquely designate a specific DXE SMM driver.\r
  @param  CommunicationBuffer   A pointer to a collection of data in memory\r
                                that will be conveyed from a non-SMM environment into an SMM environment.\r
                                The buffer must be contiguous, physically mapped, and be a physical address.\r
  @param  SourceSize            The size of the CommunicationBuffer.\r
\r
  @return Status code\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_CALLBACK_ENTRY_POINT)(\r
  IN EFI_HANDLE             SmmImageHandle,\r
  IN OUT VOID               *CommunicationBuffer OPTIONAL,\r
  IN OUT UINTN              *SourceSize OPTIONAL\r
  );\r
\r
//\r
// SMM Base Protocol Definition\r
//\r
/**\r
  Register a given driver into SMRAM.This is the equivalent of performing\r
  the LoadImage/StartImage into System Management Mode.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  FilePath              Location of the image to be installed as the handler.\r
  @param  SourceBuffer          Optional source buffer in case of the image file\r
                                being in memory.\r
  @param  SourceSize            Size of the source image file, if in memory.\r
  @param  ImageHandle           The handle that the base driver uses to decode \r
                                the handler. Unique among SMM handlers only, \r
                                not unique across DXE/EFI.\r
  @param  LegacyIA32Binary      An optional parameter that details that the associated \r
                                file is a real-mode IA-32 binary.\r
\r
  @retval EFI_SUCCESS           The operation was successful.\r
  @retval EFI_OUT_OF_RESOURCES  There were no additional SMRAM resources to load the handler\r
  @retval EFI_UNSUPPORTED       This platform does not support 16-bit handlers.\r
  @retval EFI_UNSUPPORTED       In runtime.\r
  @retval EFI_INVALID_PARAMETER The handlers was not the correct image type\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_REGISTER_HANDLER)(\r
  IN EFI_SMM_BASE_PROTOCOL                           *This,\r
  IN  EFI_DEVICE_PATH_PROTOCOL                       *FilePath,\r
  IN  VOID                                           *SourceBuffer OPTIONAL,\r
  IN  UINTN                                          SourceSize,\r
  OUT EFI_HANDLE                                     *ImageHandle,\r
  IN  BOOLEAN                                        LegacyIA32Binary OPTIONAL\r
  );\r
\r
/**\r
  Removes a handler from execution within SMRAM.  This is the equivalent of performing\r
  the UnloadImage in System Management Mode.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  ImageHandle           The handler to be removed.\r
\r
  @retval EFI_SUCCESS           The operation was successful\r
  @retval EFI_INVALID_PARAMETER The handler did not exist\r
  @retval EFI_UNSUPPORTED       In runtime.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_UNREGISTER_HANDLER)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  IN EFI_HANDLE                     ImageHandle\r
  );\r
\r
/**\r
  The SMM Inter-module Communicate Service Communicate() function\r
  provides a services to send/received messages from a registered\r
  EFI service.  The BASE protocol driver is responsible for doing\r
  any of the copies such that the data lives in boot-service-accessible RAM.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  ImageHandle           The handle of the registered driver.\r
  @param  CommunicationBuffer   Pointer to the buffer to convey into SMRAM.\r
  @param  SourceSize            The size of the data buffer being passed in.\r
\r
  @retval EFI_SUCCESS           The message was successfully posted\r
  @retval EFI_INVALID_PARAMETER The buffer was NULL\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_COMMUNICATE)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  IN EFI_HANDLE                     ImageHandle,\r
  IN OUT VOID                       *CommunicationBuffer,\r
  IN OUT UINTN                      *SourceSize\r
  );\r
\r
/**\r
  Register a callback to execute within SMM.\r
  This allows receipt of messages created with EFI_SMM_BASE_PROTOCOL.Communicate().\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  SmmImageHandle        Handle of the callback service.\r
  @param  CallbackAddress       Address of the callback service.\r
  @param  MakeLast              If present, will stipulate that the handler is posted to \r
                                be executed last in the dispatch table.\r
  @param  FloatingPointSave     This is an optional parameter which informs the\r
                                EFI_SMM_ACCESS_PROTOCOL Driver core if it needs to save\r
                                the floating point register state. If any of the handlers\r
                                require this, then the state will be saved for all of the handlers.\r
\r
  @retval EFI_SUCCESS           The operation was successful\r
  @retval EFI_OUT_OF_RESOURCES  Not enough space in the dispatch queue\r
  @retval EFI_UNSUPPORTED       In runtime.\r
  @retval EFI_UNSUPPORTED       The caller is not in SMM.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_CALLBACK_SERVICE)(\r
  IN EFI_SMM_BASE_PROTOCOL                            *This,\r
  IN EFI_HANDLE                                       SmmImageHandle,\r
  IN EFI_SMM_CALLBACK_ENTRY_POINT                     CallbackAddress,\r
  IN BOOLEAN                                          MakeLast OPTIONAL,\r
  IN BOOLEAN                                          FloatingPointSave OPTIONAL\r
  );\r
\r
/**\r
  The SmmAllocatePool() function allocates a memory region of Size bytes from memory of\r
  type PoolType and returns the address of the allocated memory in the location referenced\r
  by Buffer.  This function allocates pages from EFI SMRAM Memory as needed to grow the\r
  requested pool type.  All allocations are eight-byte aligned.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  PoolType              The type of pool to allocate.\r
                                The only supported type is EfiRuntimeServicesData;\r
                                the interface will internally map this runtime request to \r
                                SMRAM for IA-32 and leave as this type for the Itanium \r
                                processor family. Other types can be ignored.\r
  @param  Size                  The number of bytes to allocate from the pool.\r
  @param  Buffer                A pointer to a pointer to the allocated buffer if the call\r
                                succeeds; undefined otherwise.\r
\r
  @retval EFI_SUCCESS           The requested number of bytes was allocated.\r
  @retval EFI_OUT_OF_RESOURCES  The pool requested could not be allocated.\r
  @retval EFI_INVALID_PARAMETER PoolType was invalid.\r
  @retval EFI_UNSUPPORTED       In runtime.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_ALLOCATE_POOL)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  IN EFI_MEMORY_TYPE                PoolType,\r
  IN UINTN                          Size,\r
  OUT VOID                          **Buffer\r
  );\r
\r
/**\r
  The SmmFreePool() function returns the memory specified by Buffer to the system.\r
  On return, the memory's type is EFI SMRAM Memory.  The Buffer that is freed must\r
  have been allocated by SmmAllocatePool().\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  Buffer                Pointer to the buffer allocation.\r
\r
  @retval EFI_SUCCESS           The memory was returned to the system.\r
  @retval EFI_INVALID_PARAMETER Buffer was invalid.\r
  @retval EFI_UNSUPPORTED       In runtime.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_FREE_POOL)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  IN VOID                           *Buffer\r
  );\r
\r
/**\r
  This routine tells caller if execution context is SMM or not.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  InSmm                 Whether the caller is inside SMM for IA-32 or servicing a PMI for the Itanium processor family.\r
\r
  @retval EFI_SUCCESS           The operation was successful\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_INSIDE_OUT)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  OUT BOOLEAN                       *InSmm\r
  );\r
\r
/**\r
  The GetSmstLocation() function returns the locatin of the System Management\r
  Service Table.  The use of the API is such that a driver can discover the\r
  location of the SMST in its entry point and then cache it in some driver\r
  global variable so that the SMST can be invoked in subsequent callbacks.\r
\r
  @param  This                  Protocol instance pointer.\r
  @param  Smst                  Pointer to the SMST.\r
\r
  @retval EFI_SUCCESS           The operation was successful\r
  @retval EFI_INVALID_PARAMETER Smst was invalid.\r
  @retval EFI_UNSUPPORTED       Not in SMM.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_SMM_GET_SMST_LOCATION)(\r
  IN EFI_SMM_BASE_PROTOCOL          *This,\r
  IN OUT EFI_SMM_SYSTEM_TABLE       **Smst\r
  );\r
\r
/**\r
  @par Protocol Description:\r
  This protocol is used to install SMM handlers for support of subsequent SMI/PMI\r
  activations. This protocol is available on both IA-32 and Itanium-based systems.\r
\r
  @param Register\r
  Registers a handler to run in System Management RAM (SMRAM).\r
\r
  @param UnRegister\r
  Removes a handler from execution in SMRAM.\r
\r
  @param Communicate\r
  Sends/receives a message for a registered handler.\r
\r
  @param RegisterCallback\r
  Registers a callback from the constructor.\r
\r
  @param InSmm\r
  Detects whether the caller is inside or outside of SMM. SName\r
\r
  @param SmmAllocatePool\r
  Allocates SMRAM.\r
\r
  @param SmmFreePool\r
  Deallocates SMRAM.\r
\r
  @param GetSmstLocation\r
  Retrieves the location of the System Management System Table (SMST).\r
\r
**/\r
struct _EFI_SMM_BASE_PROTOCOL {\r
  EFI_SMM_REGISTER_HANDLER    Register;\r
  EFI_SMM_UNREGISTER_HANDLER  UnRegister;\r
  EFI_SMM_COMMUNICATE         Communicate;\r
  EFI_SMM_CALLBACK_SERVICE    RegisterCallback;\r
  EFI_SMM_INSIDE_OUT          InSmm;\r
  EFI_SMM_ALLOCATE_POOL       SmmAllocatePool;\r
  EFI_SMM_FREE_POOL           SmmFreePool;\r
  EFI_SMM_GET_SMST_LOCATION   GetSmstLocation;\r
};\r
\r
extern EFI_GUID gEfiSmmBaseProtocolGuid;\r
\r
#endif\r
Commit	Line	Data
	1	/** @file\r
	2	This file declares SMM Base abstraction protocol.\r
	3	This protocol is used to install SMM handlers for support of subsequent SMI/PMI activations. This\r
	4	protocol is available on both IA-32 and Itanium based systems.\r
	5	\r
	6	The EFI_SMM_BASE_PROTOCOL is a set of services that is exported by a processor device. It is\r
	7	a required protocol for the platform processor. This protocol can be used in both boot services and\r
	8	runtime mode. However, only the following member functions need to exist into runtime:\r
	9	- InSmm()\r
	10	- Communicate()\r
	11	This protocol is responsible for registering the handler services. The order in which the handlers are\r
	12	executed is prescribed only with respect to the MakeLast flag in the RegisterCallback()\r
	13	service. The driver exports these registration and unregistration services in boot services mode, but\r
	14	the registered handlers will execute through the preboot and runtime. The only way to change the\r
	15	behavior of a registered driver after ExitBootServices() has been invoked is to use some\r
	16	private communication mechanism with the driver to order it to quiesce. This model permits typical\r
	17	use cases, such as invoking the handler to enter ACPI mode, where the OS loader would make this\r
	18	call before boot services are terminated. On the other hand, handlers for services such as chipset\r
	19	workarounds for the century rollover in CMOS should provide commensurate services throughout\r
	20	preboot and OS runtime.\r
	21	\r
	22	Copyright (c) 2007, Intel Corporation\r
	23	All rights reserved. This program and the accompanying materials\r
	24	are licensed and made available under the terms and conditions of the BSD License\r
	25	which accompanies this distribution. The full text of the license may be found at\r
	26	http://opensource.org/licenses/bsd-license.php\r
	27	\r
	28	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	29	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	30	\r
	31	@par Revision Reference:\r
	32	This Protocol is defined in Framework of EFI SMM Core Interface Spec\r
	33	Version 0.9.\r
	34	\r
	35	**/\r
	36	\r
	37	#ifndef _SMM_BASE_H_\r
	38	#define _SMM_BASE_H_\r
	39	\r
	40	#include <FrameworkSmm.h>\r
	41	\r
	42	#define EFI_SMM_BASE_PROTOCOL_GUID \\r
	43	{ \\r
	44	0x1390954D, 0xda95, 0x4227, {0x93, 0x28, 0x72, 0x82, 0xc2, 0x17, 0xda, 0xa8 } \\r
	45	}\r
	46	\r
	47	typedef struct _EFI_SMM_BASE_PROTOCOL EFI_SMM_BASE_PROTOCOL;\r
	48	\r
	49	//\r
	50	// SMM Handler Definition\r
	51	//\r
	52	#define EFI_HANDLER_SUCCESS 0x0000\r
	53	#define EFI_HANDLER_CRITICAL_EXIT 0x0001\r
	54	#define EFI_HANDLER_SOURCE_QUIESCED 0x0002\r
	55	#define EFI_HANDLER_SOURCE_PENDING 0x0003\r
	56	\r
	57	/**\r
	58	Entry Point to Callback service\r
	59	\r
	60	@param SmmImageHandle A handle allocated by the SMM infrastructure code\r
	61	to uniquely designate a specific DXE SMM driver.\r
	62	@param CommunicationBuffer A pointer to a collection of data in memory\r
	63	that will be conveyed from a non-SMM environment into an SMM environment.\r
	64	The buffer must be contiguous, physically mapped, and be a physical address.\r
	65	@param SourceSize The size of the CommunicationBuffer.\r
	66	\r
	67	@return Status code\r
	68	\r
	69	**/\r
	70	typedef\r
	71	EFI_STATUS\r
	72	(EFIAPI *EFI_SMM_CALLBACK_ENTRY_POINT)(\r
	73	IN EFI_HANDLE SmmImageHandle,\r
	74	IN OUT VOID *CommunicationBuffer OPTIONAL,\r
	75	IN OUT UINTN *SourceSize OPTIONAL\r
	76	);\r
	77	\r
	78	//\r
	79	// SMM Base Protocol Definition\r
	80	//\r
	81	/**\r
	82	Register a given driver into SMRAM.This is the equivalent of performing\r
	83	the LoadImage/StartImage into System Management Mode.\r
	84	\r
	85	@param This Protocol instance pointer.\r
	86	@param FilePath Location of the image to be installed as the handler.\r
	87	@param SourceBuffer Optional source buffer in case of the image file\r
	88	being in memory.\r
	89	@param SourceSize Size of the source image file, if in memory.\r
	90	@param ImageHandle The handle that the base driver uses to decode \r
	91	the handler. Unique among SMM handlers only, \r
	92	not unique across DXE/EFI.\r
	93	@param LegacyIA32Binary An optional parameter that details that the associated \r
	94	file is a real-mode IA-32 binary.\r
	95	\r
	96	@retval EFI_SUCCESS The operation was successful.\r
	97	@retval EFI_OUT_OF_RESOURCES There were no additional SMRAM resources to load the handler\r
	98	@retval EFI_UNSUPPORTED This platform does not support 16-bit handlers.\r
	99	@retval EFI_UNSUPPORTED In runtime.\r
	100	@retval EFI_INVALID_PARAMETER The handlers was not the correct image type\r
	101	\r
	102	**/\r
	103	typedef\r
	104	EFI_STATUS\r
	105	(EFIAPI *EFI_SMM_REGISTER_HANDLER)(\r
	106	IN EFI_SMM_BASE_PROTOCOL *This,\r
	107	IN EFI_DEVICE_PATH_PROTOCOL *FilePath,\r
	108	IN VOID *SourceBuffer OPTIONAL,\r
	109	IN UINTN SourceSize,\r
	110	OUT EFI_HANDLE *ImageHandle,\r
	111	IN BOOLEAN LegacyIA32Binary OPTIONAL\r
	112	);\r
	113	\r
	114	/**\r
	115	Removes a handler from execution within SMRAM. This is the equivalent of performing\r
	116	the UnloadImage in System Management Mode.\r
	117	\r
	118	@param This Protocol instance pointer.\r
	119	@param ImageHandle The handler to be removed.\r
	120	\r
	121	@retval EFI_SUCCESS The operation was successful\r
	122	@retval EFI_INVALID_PARAMETER The handler did not exist\r
	123	@retval EFI_UNSUPPORTED In runtime.\r
	124	\r
	125	**/\r
	126	typedef\r
	127	EFI_STATUS\r
	128	(EFIAPI *EFI_SMM_UNREGISTER_HANDLER)(\r
	129	IN EFI_SMM_BASE_PROTOCOL *This,\r
	130	IN EFI_HANDLE ImageHandle\r
	131	);\r
	132	\r
	133	/**\r
	134	The SMM Inter-module Communicate Service Communicate() function\r
	135	provides a services to send/received messages from a registered\r
	136	EFI service. The BASE protocol driver is responsible for doing\r
	137	any of the copies such that the data lives in boot-service-accessible RAM.\r
	138	\r
	139	@param This Protocol instance pointer.\r
	140	@param ImageHandle The handle of the registered driver.\r
	141	@param CommunicationBuffer Pointer to the buffer to convey into SMRAM.\r
	142	@param SourceSize The size of the data buffer being passed in.\r
	143	\r
	144	@retval EFI_SUCCESS The message was successfully posted\r
	145	@retval EFI_INVALID_PARAMETER The buffer was NULL\r
	146	\r
	147	**/\r
	148	typedef\r
	149	EFI_STATUS\r
	150	(EFIAPI *EFI_SMM_COMMUNICATE)(\r
	151	IN EFI_SMM_BASE_PROTOCOL *This,\r
	152	IN EFI_HANDLE ImageHandle,\r
	153	IN OUT VOID *CommunicationBuffer,\r
	154	IN OUT UINTN *SourceSize\r
	155	);\r
	156	\r
	157	/**\r
	158	Register a callback to execute within SMM.\r
	159	This allows receipt of messages created with EFI_SMM_BASE_PROTOCOL.Communicate().\r
	160	\r
	161	@param This Protocol instance pointer.\r
	162	@param SmmImageHandle Handle of the callback service.\r
	163	@param CallbackAddress Address of the callback service.\r
	164	@param MakeLast If present, will stipulate that the handler is posted to \r
	165	be executed last in the dispatch table.\r
	166	@param FloatingPointSave This is an optional parameter which informs the\r
	167	EFI_SMM_ACCESS_PROTOCOL Driver core if it needs to save\r
	168	the floating point register state. If any of the handlers\r
	169	require this, then the state will be saved for all of the handlers.\r
	170	\r
	171	@retval EFI_SUCCESS The operation was successful\r
	172	@retval EFI_OUT_OF_RESOURCES Not enough space in the dispatch queue\r
	173	@retval EFI_UNSUPPORTED In runtime.\r
	174	@retval EFI_UNSUPPORTED The caller is not in SMM.\r
	175	\r
	176	**/\r
	177	typedef\r
	178	EFI_STATUS\r
	179	(EFIAPI *EFI_SMM_CALLBACK_SERVICE)(\r
	180	IN EFI_SMM_BASE_PROTOCOL *This,\r
	181	IN EFI_HANDLE SmmImageHandle,\r
	182	IN EFI_SMM_CALLBACK_ENTRY_POINT CallbackAddress,\r
	183	IN BOOLEAN MakeLast OPTIONAL,\r
	184	IN BOOLEAN FloatingPointSave OPTIONAL\r
	185	);\r
	186	\r
	187	/**\r
	188	The SmmAllocatePool() function allocates a memory region of Size bytes from memory of\r
	189	type PoolType and returns the address of the allocated memory in the location referenced\r
	190	by Buffer. This function allocates pages from EFI SMRAM Memory as needed to grow the\r
	191	requested pool type. All allocations are eight-byte aligned.\r
	192	\r
	193	@param This Protocol instance pointer.\r
	194	@param PoolType The type of pool to allocate.\r
	195	The only supported type is EfiRuntimeServicesData;\r
	196	the interface will internally map this runtime request to \r
	197	SMRAM for IA-32 and leave as this type for the Itanium \r
	198	processor family. Other types can be ignored.\r
	199	@param Size The number of bytes to allocate from the pool.\r
	200	@param Buffer A pointer to a pointer to the allocated buffer if the call\r
	201	succeeds; undefined otherwise.\r
	202	\r
	203	@retval EFI_SUCCESS The requested number of bytes was allocated.\r
	204	@retval EFI_OUT_OF_RESOURCES The pool requested could not be allocated.\r
	205	@retval EFI_INVALID_PARAMETER PoolType was invalid.\r
	206	@retval EFI_UNSUPPORTED In runtime.\r
	207	\r
	208	**/\r
	209	typedef\r
	210	EFI_STATUS\r
	211	(EFIAPI *EFI_SMM_ALLOCATE_POOL)(\r
	212	IN EFI_SMM_BASE_PROTOCOL *This,\r
	213	IN EFI_MEMORY_TYPE PoolType,\r
	214	IN UINTN Size,\r
	215	OUT VOID **Buffer\r
	216	);\r
	217	\r
	218	/**\r
	219	The SmmFreePool() function returns the memory specified by Buffer to the system.\r
	220	On return, the memory's type is EFI SMRAM Memory. The Buffer that is freed must\r
	221	have been allocated by SmmAllocatePool().\r
	222	\r
	223	@param This Protocol instance pointer.\r
	224	@param Buffer Pointer to the buffer allocation.\r
	225	\r
	226	@retval EFI_SUCCESS The memory was returned to the system.\r
	227	@retval EFI_INVALID_PARAMETER Buffer was invalid.\r
	228	@retval EFI_UNSUPPORTED In runtime.\r
	229	\r
	230	**/\r
	231	typedef\r
	232	EFI_STATUS\r
	233	(EFIAPI *EFI_SMM_FREE_POOL)(\r
	234	IN EFI_SMM_BASE_PROTOCOL *This,\r
	235	IN VOID *Buffer\r
	236	);\r
	237	\r
	238	/**\r
	239	This routine tells caller if execution context is SMM or not.\r
	240	\r
	241	@param This Protocol instance pointer.\r
	242	@param InSmm Whether the caller is inside SMM for IA-32 or servicing a PMI for the Itanium processor family.\r
	243	\r
	244	@retval EFI_SUCCESS The operation was successful\r
	245	\r
	246	**/\r
	247	typedef\r
	248	EFI_STATUS\r
	249	(EFIAPI *EFI_SMM_INSIDE_OUT)(\r
	250	IN EFI_SMM_BASE_PROTOCOL *This,\r
	251	OUT BOOLEAN *InSmm\r
	252	);\r
	253	\r
	254	/**\r
	255	The GetSmstLocation() function returns the locatin of the System Management\r
	256	Service Table. The use of the API is such that a driver can discover the\r
	257	location of the SMST in its entry point and then cache it in some driver\r
	258	global variable so that the SMST can be invoked in subsequent callbacks.\r
	259	\r
	260	@param This Protocol instance pointer.\r
	261	@param Smst Pointer to the SMST.\r
	262	\r
	263	@retval EFI_SUCCESS The operation was successful\r
	264	@retval EFI_INVALID_PARAMETER Smst was invalid.\r
	265	@retval EFI_UNSUPPORTED Not in SMM.\r
	266	\r
	267	**/\r
	268	typedef\r
	269	EFI_STATUS\r
	270	(EFIAPI *EFI_SMM_GET_SMST_LOCATION)(\r
	271	IN EFI_SMM_BASE_PROTOCOL *This,\r
	272	IN OUT EFI_SMM_SYSTEM_TABLE **Smst\r
	273	);\r
	274	\r
	275	/**\r
	276	@par Protocol Description:\r
	277	This protocol is used to install SMM handlers for support of subsequent SMI/PMI\r
	278	activations. This protocol is available on both IA-32 and Itanium-based systems.\r
	279	\r
	280	@param Register\r
	281	Registers a handler to run in System Management RAM (SMRAM).\r
	282	\r
	283	@param UnRegister\r
	284	Removes a handler from execution in SMRAM.\r
	285	\r
	286	@param Communicate\r
	287	Sends/receives a message for a registered handler.\r
	288	\r
	289	@param RegisterCallback\r
	290	Registers a callback from the constructor.\r
	291	\r
	292	@param InSmm\r
	293	Detects whether the caller is inside or outside of SMM. SName\r
	294	\r
	295	@param SmmAllocatePool\r
	296	Allocates SMRAM.\r
	297	\r
	298	@param SmmFreePool\r
	299	Deallocates SMRAM.\r
	300	\r
	301	@param GetSmstLocation\r
	302	Retrieves the location of the System Management System Table (SMST).\r
	303	\r
	304	**/\r
	305	struct _EFI_SMM_BASE_PROTOCOL {\r
	306	EFI_SMM_REGISTER_HANDLER Register;\r
	307	EFI_SMM_UNREGISTER_HANDLER UnRegister;\r
	308	EFI_SMM_COMMUNICATE Communicate;\r
	309	EFI_SMM_CALLBACK_SERVICE RegisterCallback;\r
	310	EFI_SMM_INSIDE_OUT InSmm;\r
	311	EFI_SMM_ALLOCATE_POOL SmmAllocatePool;\r
	312	EFI_SMM_FREE_POOL SmmFreePool;\r
	313	EFI_SMM_GET_SMST_LOCATION GetSmstLocation;\r
	314	};\r
	315	\r
	316	extern EFI_GUID gEfiSmmBaseProtocolGuid;\r
	317	\r
	318	#endif\r