]> git.proxmox.com Git - mirror_edk2.git/blame_incremental - MdeModulePkg/MdeModulePkg.dec
projects / mirror_edk2.git / blame_incremental
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (non-incremental) | history | HEAD
Remove some useless functions for EhciPei driver.
[mirror_edk2.git] / MdeModulePkg / MdeModulePkg.dec
... / ...
CommitLineData
1## @file MdeModulePkg.dec\r
2#\r
3# This package provides the modules that conform to UEFI/PI Industry standards.\r
4# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
5# and libraries instances, which are used for those modules.\r
6#\r
7# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
8# This program and the accompanying materials are licensed and made available under \r
9# the terms and conditions of the BSD License that accompanies this distribution. \r
10# The full text of the license may be found at\r
11# http://opensource.org/licenses/bsd-license.php. \r
12# \r
13# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
14# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
15#\r
16##\r
17\r
18\r
19[Defines]\r
20 DEC_SPECIFICATION = 0x00010005\r
21 PACKAGE_NAME = MdeModulePkg\r
22 PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
23 PACKAGE_VERSION = 0.91\r
24\r
25[Includes]\r
26 Include\r
27\r
28\r
29[LibraryClasses]\r
30 ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
31 # This library is only intended to be used by UEFI network stack modules.\r
32 IpIoLib|Include/Library/IpIoLib.h\r
33\r
34 ## @libraryclass Basic function for UEFI network stack.\r
35 # This library is only intended to be used by UEFI network stack modules.\r
36 NetLib|Include/Library/NetLib.h\r
37\r
38 ## @libraryclass The helper routines to access UDP service.\r
39 # This library is only intended to be used by UEFI network stack modules.\r
40 UdpIoLib|Include/Library/UdpIoLib.h\r
41\r
42 ## @libraryclass The helper routines to access TCP service.\r
43 # This library is only intended to be used by UEFI network stack modules.\r
44 TcpIoLib|Include/Library/TcpIoLib.h\r
45\r
46 ## @libraryclass Defines a set of methods to reset whole system.\r
47 ResetSystemLib|Include/Library/ResetSystemLib.h\r
48\r
49 ## @libraryclass Defines a set of methods related do S3 mode.\r
50 # This library class is no longer used and modules using this library should\r
51 # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
52 S3Lib|Include/Library/S3Lib.h\r
53\r
54 ## @libraryclass Defines a set of methods related recovery mode.\r
55 # This library class is no longer used and modules using this library should\r
56 # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
57 RecoveryLib|Include/Library/RecoveryLib.h\r
58\r
59 ## @libraryclass Provides HII related functions.\r
60 HiiLib|Include/Library/HiiLib.h\r
61\r
62 ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
63 CapsuleLib|Include/Library/CapsuleLib.h\r
64\r
65 ## @libraryclass Library for Deferred Procedure Calls.\r
66 DpcLib|Include/Library/DpcLib.h\r
67\r
68 ## @libraryclass Provides global variables that are pointers\r
69 # to the UEFI HII related protocols.\r
70 #\r
71 UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
72\r
73 ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
74 #\r
75 SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
76\r
77 ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
78 #\r
79 OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
80\r
81 ## @libraryclass Debug Agent is used to provide soft debug capability.\r
82 #\r
83 DebugAgentLib|Include/Library/DebugAgentLib.h\r
84\r
85 ## @libraryclass Provide platform specific hooks.\r
86 #\r
87 PlatformHookLib|Include/Library/PlatformHookLib.h\r
88\r
89 ## @libraryclass Provide platform specific hooks for SMM core.\r
90 #\r
91 SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
92\r
93 ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
94 #\r
95 LockBoxLib|Include/Library/LockBoxLib.h\r
96 \r
97[Guids]\r
98 ## MdeModule package token space guid\r
99 # Include/Guid/MdeModulePkgTokenSpace.h\r
100 gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
101\r
102 ## Hob guid for Pcd DataBase\r
103 # Include/Guid/PcdDataBaseHobGuid.h\r
104 gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
105\r
106 ## Guid for EDKII implementation GUIDed opcodes\r
107 # Include/Guid/MdeModuleHii.h\r
108 gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
109\r
110 ## Guid for Framework vfr GUIDed opcodes.\r
111 # Include/Guid/MdeModuleHii.h\r
112 gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
113\r
114 ## Guid to specify the System Non Volatile FV\r
115 # Include/Guid/SystemNvDataGuid.h\r
116 gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
117\r
118 ## Guid specify the device is the console out device.\r
119 # Include/Guid/ConsoleOutDevice.h\r
120 gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
121\r
122 ## Guid specify the device is the console in device.\r
123 # Include/Guid/ConsoleInDevice.h\r
124 gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
125\r
126 ## Hob and Variable guid specify the platform memory type information.\r
127 # Include/Guid/MemoryTypeInformation.h\r
128 gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
129\r
130 ## Capsule update hob and variable guid\r
131 # Include/Guid/CapsuleVendor.h\r
132 gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
133\r
134 ## Guid specifiy the device is the StdErr device.\r
135 # Include/Guid/StandardErrorDevice.h\r
136 gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
137\r
138 ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
139 # Include/Guid/VariableFormat.h\r
140 gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
141\r
142 # Include/Guid/VariableIndexTable.h\r
143 gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
144\r
145 ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
146 # Include/Guid/SmmVariableCommon.h\r
147 gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
148 \r
149 ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
150 # Include/Guid/Performance.h\r
151 gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
152 gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
153\r
154 ## Guid is defined for CRC32 encapsulation scheme.\r
155 # Include/Guid/Crc32GuidedSectionExtraction.h\r
156 gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
157\r
158 ## Include/Guid/NicIp4ConfigNvData.h\r
159 gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
160\r
161 ## Include/Guid/StatusCodeCallbackGuid.h\r
162 gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
163\r
164 ## GUID identifies status code records HOB that originate from the PEI status code\r
165 # Include/Guid/MemoryStatusCodeRecord.h\r
166 gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
167\r
168 ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
169 # Include/Guid/StatusCodeDataTypeDebug.h\r
170 gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
171\r
172 ## A configuration Table Guid for Load module at fixed address \r
173 # Include/Guid/LoadModuleAtFixedAddress.h\r
174 gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
175\r
176 ## GUID used to store the global debug mask value into an EFI Variable\r
177 # Include/Guid/DebugMask.h \r
178 gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
179 \r
180 ## Event for the DXE Core to signal idle events\r
181 # Include/Guid/EventIdle.h\r
182 gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
183\r
184 ## Include/Guid/RecoveryDevice.h\r
185 gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
186\r
187 ## Include/Guid/RecoveryDevice.h\r
188 gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
189\r
190 ## Include/Guid/RecoveryDevice.h\r
191 gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
192\r
193 ## Include/Guid/RecoveryDevice.h\r
194 gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
195\r
196 ## Include/Guid/SmmLockBox.h\r
197 gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
198\r
199 ## Include/Guid/AcpiS3Context.h\r
200 gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
201\r
202 ## Include/Guid/AcpiS3Context.h\r
203 gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
204\r
205 ## Include/Guid/BootScriptExecutorVariable.h\r
206 gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
207 gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
208\r
209 ## Include/Guid/UsbKeyBoardLayout.h\r
210 gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
211 gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
212 \r
213 ## Include/Guid/HiiResourceSampleHii.h\r
214 gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
215\r
216 ## Include/Guid/DriverSampleHii.h\r
217 gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
218 gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
219 gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
220\r
221 ## Include/Guid/PlatDriOverrideHii.h\r
222 gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
223\r
224 ## Include/Guid/Ip4ConfigHii.h\r
225 gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
226\r
227 ## Include/Guid/VlanConfigHii.h\r
228 gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
229\r
230 ## Include/Guid/Ip4IScsiConfigHii.h\r
231 gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
232 gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
233\r
234 ## Include/Guid/ZeroGuid.h\r
235 gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
236 \r
237 ## Include/Guid/MtcVendor.h\r
238 gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
239\r
240[Ppis]\r
241 ## Include/Ppi/AtaController.h\r
242 gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
243\r
244 ## Include/Ppi/UsbHostController.h\r
245 gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
246\r
247 ## Include/Ppi/Usb2HostController.h\r
248 gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
249\r
250 ## Include/Ppi/UsbController.h\r
251 gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
252\r
253 ## Include/Ppi/UsbIo.h\r
254 gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
255\r
256 ## Include/Ppi/Capsule.h\r
257 gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
258\r
259 ## Include/Ppi/SecPerformance.h\r
260 gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
261\r
262 ## Include/Ppi/SmmCommunication.h\r
263 gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
264\r
265 ## Include/Ppi/SmmAccess.h\r
266 gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
267\r
268 ## Include/Ppi/SmmControl.h\r
269 gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
270\r
271 ## Include/Ppi/PostBootScriptTable.h\r
272 gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
273\r
274[Protocols]\r
275 ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
276 # Include/Protocol/LoadPe32Image.h\r
277 # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
278 # If developer need implement such functionality, they should use BasePeCoffLib.\r
279 gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
280\r
281 ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
282 # Include/Protocol/Print2.h\r
283 gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
284\r
285 ## This protocol defines the generic memory test interfaces in Dxe phase.\r
286 # Include/Protocol/GenericMemoryTest.h\r
287 gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
288\r
289 ## Include/Protocol/Dpc.h\r
290 gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
291\r
292 ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
293 # Include/Protocol/FaultTolerantWrite.h\r
294 gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
295\r
296 ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
297 # Include/Protocol/SmmFaultTolerantWrite.h\r
298 gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
299 \r
300 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
301 # Include/Protocol/SwapAddressRange.h\r
302 gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
303 \r
304 ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
305 # Include/Protocol/SmmSwapAddressRange.h\r
306 gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
307 \r
308 ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
309 # Include/Protocol/SmmVariableProtocol.h\r
310 gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
311\r
312 ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
313 # Include/Protocol/SmmFirmwareVolumeBlock.h\r
314 gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
315\r
316 ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
317 # Include/Guid/DebugMask.h \r
318 gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
319\r
320 ## Include/Protocol/LockBox.h\r
321 gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
322 \r
323 ## Include/Protocol/FormBrowserEx.h\r
324 gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
325\r
326 ## Include/Protocol/EbcVmTest.h\r
327 gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
328\r
329 ## Include/Protocol/EbcSimpleDebugger.h\r
330 gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
331\r
332 ## Include/Protocol/BootLogo.h\r
333 gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
334\r
335[PcdsFeatureFlag]\r
336 ## Indicate whether platform can support update capsule across a system reset\r
337 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
338\r
339 ## This feature flag can be used to enable or disable all PCD PEIM services.\r
340 # If TRUE, all PCD PPI services will be produced.\r
341 # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
342 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
343\r
344 ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
345 # It can be disabled to save size.\r
346 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
347\r
348 ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
349 # It can be disabled to save size.\r
350 gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
351\r
352 ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
353 # stored as a vendor configuration table into the EFI system table.\r
354 # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
355 # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
356 # not output useful info.\r
357 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
358\r
359 ## If TRUE, Unicode Collation Protocol will be installed.\r
360 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
361\r
362 ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
363 gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
364\r
365 ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
366 # It could be set FALSE to save size.\r
367 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
368\r
369 ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
370 # It could be set FALSE to save size.\r
371 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
372\r
373 ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
374 # If TE section is not found, then PeiCore will search PE section.\r
375 # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
376 # This PCD is used to tune Pei phase performance to reduce the search image time.\r
377 # It can be set according to the generated image section type.\r
378 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
379\r
380 ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
381 # interrupt to access usb device in the case of absence of usb stack. \r
382 # DUET platform requires the token to be TRUE.\r
383 gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
384 \r
385 ## If TRUE, HiiImageProtocol will be installed.\r
386 # FALSE is for size reduction.\r
387 gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
388\r
389 ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
390 # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
391 # from HII database.\r
392 gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
393\r
394 ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
395 # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
396 # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
397 gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
398\r
399 ## If TRUE, HelloWorld Application will print the verbose information.\r
400 # This PCD is a sample to explain FeatureFlag PCD usage.\r
401 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
402\r
403 ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
404 # If FASLE, only FTW Write service is available.\r
405 gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
406\r
407 ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
408 # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
409 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
410\r
411 ## This PCD specifies whether PciBus supports the hot plug device.\r
412 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
413\r
414 ## This PCD specifies whether the PCI bus driver probes non-standard, \r
415 # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
416 gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
417 ## This PCD specifies whether StatusCode is reported via Serial port.\r
418 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
419\r
420 ## This PCD specifies whether StatusCode is stored in memory.\r
421 # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
422 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
423\r
424 ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
425 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
426\r
427 ## This PCD specified whether ACPI SDT protocol is installed.\r
428 gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
429\r
430 ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
431 # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
432 # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
433 gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
434\r
435 ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
436 # If TRUE, TEXT statement will always be set to GrayOut.\r
437 # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
438 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
439 \r
440 ## If TRUE, recovery from IDE disk will be supported.\r
441 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
442\r
443 ## If TRUE, recovery from FAT floppy disk will be supported.\r
444 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
445\r
446 ## If TRUE, recovery from data CD will be supported.\r
447 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
448\r
449 ## If TRUE, recovery from FAT USB disk will be supported.\r
450 gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
451\r
452[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
453 ##\r
454 # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
455 # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
456 # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
457 # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
458 # is built in firmware.\r
459 #\r
460 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
461\r
462 ##\r
463 # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
464 # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
465 #\r
466 gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
467\r
468[PcdsFixedAtBuild]\r
469 ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
470 # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
471 # for a dynamic PCD used in PEI phase.\r
472 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
473\r
474 ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
475 # to store PCD value.\r
476 #\r
477 gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
478\r
479 ## Maximum number of FV is supported by PeiCore's dispatching.\r
480 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
481\r
482 ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
483 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
484\r
485 ## Maximum stack size for PeiCore.\r
486 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
487\r
488 ## Maximum PPI count is supported by PeiCore's PPI database.\r
489 gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
490\r
491 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
492 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
493 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
494 # be reflushed through the manner of fault tolerant write.\r
495 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
496\r
497 ## The maximum size of single common variable, that is non-HwErr type varible.\r
498 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
499\r
500 ## The maximum size of single hardware error record variable.\r
501 # In IA32/X64 platforms, this value should be larger than 1KB.\r
502 # In IA64 platforms, this value should be larger than 128KB.\r
503 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
504\r
505 ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
506 # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
507 # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
508 # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
509 gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
510\r
511 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
512 gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
513\r
514 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
515 # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
516 # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
517 # be reflushed through the manner of fault tolerant write.\r
518 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
519\r
520 ## Size of the FTW working block range.\r
521 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
522\r
523 ## FFS filename to find the ACPI tables\r
524 gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
525\r
526 ## FFS filename to find the capsule coalesce image.\r
527 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
528\r
529 ## Single root I/O virtualization virtual function memory BAR alignment\r
530 # BITN set indicates 2 of n+12 power\r
531 # BIT0 set indicates 4KB alignment\r
532 # BIT1 set indicates 8KB alignment\r
533 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
534 \r
535 ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
536 # -1: Enable the feature as fixed offset to TOLM\r
537 # 0: Disable the feature.\r
538 # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
539 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
540 \r
541 ## Smbios version\r
542 gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
543\r
544 ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
545 # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
546 #\r
547 gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
548\r
549 ## Progress Code for OS Loader LoadImage start.\r
550 # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
551 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
552\r
553 ## Progress Code for OS Loader StartImage start.\r
554 # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
555 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
556\r
557 ## Progress Code for S3 Suspend start.\r
558 # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r
559 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
560\r
561 ## Progress Code for S3 Suspend end.\r
562 # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r
563 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
564\r
565[PcdsFixedAtBuild,PcdsPatchableInModule]\r
566 ## Maximun number of performance log entries during PEI phase.\r
567 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
568\r
569 ## RTC Update Timeout Value\r
570 gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
571\r
572 ## If TRUE, then 16550 serial port registers are in MMIO space. \r
573 # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
574 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
575 \r
576 ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
577 # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
578 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
579\r
580 ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
581 # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
582 # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
583 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
584 \r
585 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
586 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
587\r
588 ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
589 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
590\r
591 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
592 # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
593 # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
594 # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
595 # BIT7..BIT6 - Reserved. Must be 0.\r
596 #\r
597 # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
598 #\r
599 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
600\r
601 ## FIFO Control Register (FCR) for the 16550 serial port. \r
602 # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
603 # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
604 # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
605 # BIT4..BIT3 - Reserved. Must be 0.\r
606 # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
607 # BIT7..BIT6 - Reserved. Must be 0.\r
608 #\r
609 # Default is to enable and clear all FIFOs.\r
610 #\r
611 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
612\r
613 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
614 # structure. The default value for this PCD is 0, which means that the DXE Core\r
615 # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
616 # boundary as close to the top of memory as feasible. If this PCD is set to a \r
617 # value other than 0, then the DXE Core will first attempt to allocate the \r
618 # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
619 # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
620 # boundary as close to the top of memory as feasible.\r
621 #\r
622 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
623 \r
624[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
625 ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
626 # This PCD could be set to 0 then console output could be at max column and max row.\r
627 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
628\r
629 ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r
630 # This PCD could be set to 0 then console output could be at max column and max row.\r
631 gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
632\r
633 ## This PCD defines the video horizontal resolution.\r
634 # This PCD could be set to 0 then video resolution could be at highest resolution.\r
635 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
636\r
637 ## This PCD defines the video vertical resolution.\r
638 # This PCD could be set to 0 then video resolution could be at highest resolution.\r
639 gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
640\r
641[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
642 ## Base address of the NV variable range in flash device\r
643 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
644\r
645 ## Base address of the FTW spare block range in flash device.\r
646 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
647\r
648 ## Base address of the FTW working block range in flash device.\r
649 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
650\r
651 ## 64-bit Base address of the NV variable range in flash device\r
652 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
653\r
654 ## 64-bit Base address of the FTW spare block range in flash device.\r
655 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
656\r
657 ## 64-bit Base address of the FTW working block range in flash device.\r
658 gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
659\r
660 ## This PCD defines the print string.\r
661 # This PCD is a sample to explain String typed PCD usage.\r
662 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
663\r
664 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
665 # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
666 gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
667\r
668 ## This PCD specifies whether the Single Root I/O virtualization support.\r
669 gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
670\r
671 ## This PCD specifies whether the Alternative Routing-ID support.\r
672 gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
673\r
674 ## This PCD specifies whether the Multi Root I/O virtualization support.\r
675 gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
676\r
677[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
678 ## This PCD defines the times to print hello world string.\r
679 # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
680 gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
681\r
682 ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
683 # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
684 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
685\r
686 ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
687 # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
688 gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
689\r
690 ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
691 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
692\r
693 ## Firmware revision that is default value filled into the EFI System Table\r
694 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
695\r
696 ## Null-terminated Unicode string that described the firmware version\r
697 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
698\r
699 ## Null-terminated Unicode string that contains the date the formware was released\r
700 gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
701\r
702 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
703 # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
704 # The default value in PeiPhase is 1 KBytes.\r
705 # The default value in DxePhase is 128 KBytes.\r
706 gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
707\r
708 ## This PCD specifies whether to reset system when memory type information changes.\r
709 gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
710\r
711 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
712 # Only following values defined in UEFI specification are valid:\r
713 # 0x00 (EFI_BLACK)\r
714 # 0x01 (EFI_BLUE)\r
715 # 0x02 (EFI_GREEN)\r
716 # 0x03 (EFI_CYAN)\r
717 # 0x04 (EFI_RED)\r
718 # 0x05 (EFI_MAGENTA)\r
719 # 0x06 (EFI_BROWN)\r
720 # 0x07 (EFI_LIGHTGRAY)\r
721 # 0x08 (EFI_DARKGRAY) \r
722 # 0x09 (EFI_LIGHTBLUE)\r
723 # 0x0A (EFI_LIGHTGREEN)\r
724 # 0x0B (EFI_LIGHTCYAN)\r
725 # 0x0C (EFI_LIGHTRED)\r
726 # 0x0D (EFI_LIGHTMAGENTA)\r
727 # 0x0E (EFI_YELLOW)\r
728 # 0x0F (EFI_WHITE)\r
729 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
730 \r
731 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
732 # Only following values defined in UEFI specification are valid:\r
733 # 0x00 (EFI_BLACK)\r
734 # 0x01 (EFI_BLUE)\r
735 # 0x02 (EFI_GREEN)\r
736 # 0x03 (EFI_CYAN)\r
737 # 0x04 (EFI_RED)\r
738 # 0x05 (EFI_MAGENTA)\r
739 # 0x06 (EFI_BROWN)\r
740 # 0x07 (EFI_LIGHTGRAY)\r
741 # 0x08 (EFI_DARKGRAY) \r
742 # 0x09 (EFI_LIGHTBLUE)\r
743 # 0x0A (EFI_LIGHTGREEN)\r
744 # 0x0B (EFI_LIGHTCYAN)\r
745 # 0x0C (EFI_LIGHTRED)\r
746 # 0x0D (EFI_LIGHTMAGENTA)\r
747 # 0x0E (EFI_YELLOW)\r
748 # 0x0F (EFI_WHITE)\r
749 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
750 \r
751 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
752 # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
753 # 0x00 (EFI_BLACK)\r
754 # 0x01 (EFI_BLUE)\r
755 # 0x02 (EFI_GREEN)\r
756 # 0x03 (EFI_CYAN)\r
757 # 0x04 (EFI_RED)\r
758 # 0x05 (EFI_MAGENTA)\r
759 # 0x06 (EFI_BROWN)\r
760 # 0x07 (EFI_LIGHTGRAY)\r
761 # 0x08 (EFI_DARKGRAY) \r
762 # 0x09 (EFI_LIGHTBLUE)\r
763 # 0x0A (EFI_LIGHTGREEN)\r
764 # 0x0B (EFI_LIGHTCYAN)\r
765 # 0x0C (EFI_LIGHTRED)\r
766 # 0x0D (EFI_LIGHTMAGENTA)\r
767 # 0x0E (EFI_YELLOW)\r
768 # 0x0F (EFI_WHITE)\r
769 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
770 \r
771 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
772 # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
773 # 0x00 (EFI_BACKGROUND_BLACK)\r
774 # 0x10 (EFI_BACKGROUND_BLUE)\r
775 # 0x20 (EFI_BACKGROUND_GREEN)\r
776 # 0x30 (EFI_BACKGROUND_CYAN)\r
777 # 0x40 (EFI_BACKGROUND_RED)\r
778 # 0x50 (EFI_BACKGROUND_MAGENTA)\r
779 # 0x60 (EFI_BACKGROUND_BROWN)\r
780 # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
781 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
782\r
783 ## Time in second to delay for SATA devices to spin-up for recovery.\r
784 gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
785\r
786 ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
787 # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
788 # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
789 # script node created in runtime phase.\r
790 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
791\r
792 ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
793 # The default size 32K. When changing the value of this PCD, the platform developer should\r
794 # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r
795 gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
796\r
797 ## This PCD specifies whether 1G page table is enabled.\r
798 gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
799\r
800[PcdsPatchableInModule]\r
801 ## Specify memory size with page number for PEI code when \r
802 # the feature of Loading Module at Fixed Address is enabled\r
803 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
804 \r
805 ## Specify memory size with page number for DXE boot time code when \r
806 # the feature of Loading Module at Fixed Address is enabled\r
807 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
808 \r
809 ## Specify memory size with page number for DXE runtime code when \r
810 # the feature of Loading Module at Fixed Address is enabled\r
811 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
812 \r
813 ## Specify memory size with page number for SMM code when \r
814 # the feature of Loading Module at Fixed Address is enabled\r
815 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
816\r
817[PcdsDynamic, PcdsDynamicEx]\r
818 ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
819 # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
820 # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
821 # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
822 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
823\r
EFI Development Kit II mirror for PVE