[mirror_edk2.git] / MdePkg / Library / BaseDebugLibSerialPort / DebugLib.c

/** @file\r
  Base Debug library instance base on Serial Port library.\r
  It uses PrintLib to send debug messages to serial port device.\r
\r
  NOTE: If the Serial Port library enables hardware flow control, then a call\r
  to DebugPrint() or DebugAssert() may hang if writes to the serial port are\r
  being blocked.  This may occur if a key(s) are pressed in a terminal emulator\r
  used to monitor the DEBUG() and ASSERT() messages.\r
\r
  Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>\r
  This program and the accompanying materials\r
  are licensed and made available under the terms and conditions of the BSD License\r
  which accompanies this distribution.  The full text of the license may be found at\r
  http://opensource.org/licenses/bsd-license.php.\r
\r
  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
**/\r
\r
#include <Base.h>\r
#include <Library/DebugLib.h>\r
#include <Library/BaseLib.h>\r
#include <Library/PrintLib.h>\r
#include <Library/PcdLib.h>\r
#include <Library/BaseMemoryLib.h>\r
#include <Library/SerialPortLib.h>\r
#include <Library/DebugPrintErrorLevelLib.h>\r
\r
//\r
// Define the maximum debug and assert message length that this library supports\r
//\r
#define MAX_DEBUG_MESSAGE_LENGTH  0x100\r
\r
//\r
// VA_LIST can not initialize to NULL for all compiler, so we use this to\r
// indicate a null VA_LIST\r
//\r
VA_LIST     mVaListNull;\r
\r
/**\r
  The constructor function initialize the Serial Port Library\r
\r
  @retval EFI_SUCCESS   The constructor always returns RETURN_SUCCESS.\r
\r
**/\r
RETURN_STATUS\r
EFIAPI\r
BaseDebugLibSerialPortConstructor (\r
  VOID\r
  )\r
{\r
  return SerialPortInitialize ();\r
}\r
\r
/**\r
  Prints a debug message to the debug output device if the specified error level is enabled.\r
\r
  If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
  GetDebugPrintErrorLevel (), then print the message specified by Format and the\r
  associated variable argument list to the debug output device.\r
\r
  If Format is NULL, then ASSERT().\r
\r
  @param  ErrorLevel  The error level of the debug message.\r
  @param  Format      Format string for the debug message to print.\r
  @param  ...         Variable argument list whose contents are accessed\r
                      based on the format string specified by Format.\r
\r
**/\r
VOID\r
EFIAPI\r
DebugPrint (\r
  IN  UINTN        ErrorLevel,\r
  IN  CONST CHAR8  *Format,\r
  ...\r
  )\r
{\r
  VA_LIST  Marker;\r
\r
  VA_START (Marker, Format);\r
  DebugVPrint (ErrorLevel, Format, Marker);\r
  VA_END (Marker);\r
}\r
\r
\r
/**\r
  Prints a debug message to the debug output device if the specified\r
  error level is enabled base on Null-terminated format string and a\r
  VA_LIST argument list or a BASE_LIST argument list.\r
\r
  If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
  GetDebugPrintErrorLevel (), then print the message specified by Format and\r
  the associated variable argument list to the debug output device.\r
\r
  If Format is NULL, then ASSERT().\r
\r
  @param  ErrorLevel      The error level of the debug message.\r
  @param  Format          Format string for the debug message to print.\r
  @param  VaListMarker    VA_LIST marker for the variable argument list.\r
  @param  BaseListMarker  BASE_LIST marker for the variable argument list.\r
\r
**/\r
VOID\r
DebugPrintMarker (\r
  IN  UINTN         ErrorLevel,\r
  IN  CONST CHAR8   *Format,\r
  IN  VA_LIST       VaListMarker,\r
  IN  BASE_LIST     BaseListMarker\r
  )\r
{\r
  CHAR8    Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
\r
  //\r
  // If Format is NULL, then ASSERT().\r
  //\r
  ASSERT (Format != NULL);\r
\r
  //\r
  // Check driver debug mask value and global mask\r
  //\r
  if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) {\r
    return;\r
  }\r
\r
  //\r
  // Convert the DEBUG() message to an ASCII String\r
  //\r
  if (BaseListMarker == NULL) {\r
    AsciiVSPrint (Buffer, sizeof (Buffer), Format, VaListMarker);\r
  } else {\r
    AsciiBSPrint (Buffer, sizeof (Buffer), Format, BaseListMarker);\r
  }\r
\r
  //\r
  // Send the print string to a Serial Port\r
  //\r
  SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));\r
}\r
\r
\r
/**\r
  Prints a debug message to the debug output device if the specified\r
  error level is enabled.\r
\r
  If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
  GetDebugPrintErrorLevel (), then print the message specified by Format and\r
  the associated variable argument list to the debug output device.\r
\r
  If Format is NULL, then ASSERT().\r
\r
  @param  ErrorLevel    The error level of the debug message.\r
  @param  Format        Format string for the debug message to print.\r
  @param  VaListMarker  VA_LIST marker for the variable argument list.\r
\r
**/\r
VOID\r
EFIAPI\r
DebugVPrint (\r
  IN  UINTN         ErrorLevel,\r
  IN  CONST CHAR8   *Format,\r
  IN  VA_LIST       VaListMarker\r
  )\r
{\r
  DebugPrintMarker (ErrorLevel, Format, VaListMarker, NULL);\r
}\r
\r
\r
/**\r
  Prints a debug message to the debug output device if the specified\r
  error level is enabled.\r
  This function use BASE_LIST which would provide a more compatible\r
  service than VA_LIST.\r
\r
  If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
  GetDebugPrintErrorLevel (), then print the message specified by Format and\r
  the associated variable argument list to the debug output device.\r
\r
  If Format is NULL, then ASSERT().\r
\r
  @param  ErrorLevel      The error level of the debug message.\r
  @param  Format          Format string for the debug message to print.\r
  @param  BaseListMarker  BASE_LIST marker for the variable argument list.\r
\r
**/\r
VOID\r
EFIAPI\r
DebugBPrint (\r
  IN  UINTN         ErrorLevel,\r
  IN  CONST CHAR8   *Format,\r
  IN  BASE_LIST     BaseListMarker\r
  )\r
{\r
  DebugPrintMarker (ErrorLevel, Format, mVaListNull, BaseListMarker);\r
}\r
\r
\r
/**\r
  Prints an assert message containing a filename, line number, and description.\r
  This may be followed by a breakpoint or a dead loop.\r
\r
  Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"\r
  to the debug output device.  If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of\r
  PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if\r
  DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then\r
  CpuDeadLoop() is called.  If neither of these bits are set, then this function\r
  returns immediately after the message is printed to the debug output device.\r
  DebugAssert() must actively prevent recursion.  If DebugAssert() is called while\r
  processing another DebugAssert(), then DebugAssert() must return immediately.\r
\r
  If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.\r
  If Description is NULL, then a <Description> string of "(NULL) Description" is printed.\r
\r
  @param  FileName     The pointer to the name of the source file that generated the assert condition.\r
  @param  LineNumber   The line number in the source file that generated the assert condition\r
  @param  Description  The pointer to the description of the assert condition.\r
\r
**/\r
VOID\r
EFIAPI\r
DebugAssert (\r
  IN CONST CHAR8  *FileName,\r
  IN UINTN        LineNumber,\r
  IN CONST CHAR8  *Description\r
  )\r
{\r
  CHAR8  Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
\r
  //\r
  // Generate the ASSERT() message in Ascii format\r
  //\r
  AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", gEfiCallerBaseName, FileName, LineNumber, Description);\r
\r
  //\r
  // Send the print string to the Console Output device\r
  //\r
  SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));\r
\r
  //\r
  // Generate a Breakpoint, DeadLoop, or NOP based on PCD settings\r
  //\r
  if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {\r
    CpuBreakpoint ();\r
  } else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {\r
    CpuDeadLoop ();\r
  }\r
}\r
\r
\r
/**\r
  Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.\r
\r
  This function fills Length bytes of Buffer with the value specified by\r
  PcdDebugClearMemoryValue, and returns Buffer.\r
\r
  If Buffer is NULL, then ASSERT().\r
  If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
\r
  @param   Buffer  The pointer to the target buffer to be filled with PcdDebugClearMemoryValue.\r
  @param   Length  The number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.\r
\r
  @return  Buffer  The pointer to the target buffer filled with PcdDebugClearMemoryValue.\r
\r
**/\r
VOID *\r
EFIAPI\r
DebugClearMemory (\r
  OUT VOID  *Buffer,\r
  IN UINTN  Length\r
  )\r
{\r
  //\r
  // If Buffer is NULL, then ASSERT().\r
  //\r
  ASSERT (Buffer != NULL);\r
\r
  //\r
  // SetMem() checks for the the ASSERT() condition on Length and returns Buffer\r
  //\r
  return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));\r
}\r
\r
\r
/**\r
  Returns TRUE if ASSERT() macros are enabled.\r
\r
  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of\r
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.\r
\r
  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.\r
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.\r
\r
**/\r
BOOLEAN\r
EFIAPI\r
DebugAssertEnabled (\r
  VOID\r
  )\r
{\r
  return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);\r
}\r
\r
\r
/**\r
  Returns TRUE if DEBUG() macros are enabled.\r
\r
  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of\r
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.\r
\r
  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.\r
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.\r
\r
**/\r
BOOLEAN\r
EFIAPI\r
DebugPrintEnabled (\r
  VOID\r
  )\r
{\r
  return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);\r
}\r
\r
\r
/**\r
  Returns TRUE if DEBUG_CODE() macros are enabled.\r
\r
  This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of\r
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.\r
\r
  @retval  TRUE    The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.\r
  @retval  FALSE   The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.\r
\r
**/\r
BOOLEAN\r
EFIAPI\r
DebugCodeEnabled (\r
  VOID\r
  )\r
{\r
  return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
}\r
\r
\r
/**\r
  Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.\r
\r
  This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of\r
  PcdDebugProperyMask is set.  Otherwise FALSE is returned.\r
\r
  @retval  TRUE    The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.\r
  @retval  FALSE   The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.\r
\r
**/\r
BOOLEAN\r
EFIAPI\r
DebugClearMemoryEnabled (\r
  VOID\r
  )\r
{\r
  return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);\r
}\r
\r
/**\r
  Returns TRUE if any one of the bit is set both in ErrorLevel and PcdFixedDebugPrintErrorLevel.\r
\r
  This function compares the bit mask of ErrorLevel and PcdFixedDebugPrintErrorLevel.\r
\r
  @retval  TRUE    Current ErrorLevel is supported.\r
  @retval  FALSE   Current ErrorLevel is not supported.\r
\r
**/\r
BOOLEAN\r
EFIAPI\r
DebugPrintLevelEnabled (\r
  IN  CONST UINTN        ErrorLevel\r
  )\r
{\r
  return (BOOLEAN) ((ErrorLevel & PcdGet32(PcdFixedDebugPrintErrorLevel)) != 0);\r
}\r
\r
Commit	Line	Data
	1	/** @file\r
	2	Base Debug library instance base on Serial Port library.\r
	3	It uses PrintLib to send debug messages to serial port device.\r
	4	\r
	5	NOTE: If the Serial Port library enables hardware flow control, then a call\r
	6	to DebugPrint() or DebugAssert() may hang if writes to the serial port are\r
	7	being blocked. This may occur if a key(s) are pressed in a terminal emulator\r
	8	used to monitor the DEBUG() and ASSERT() messages.\r
	9	\r
	10	Copyright (c) 2006 - 2019, Intel Corporation. All rights reserved.<BR>\r
	11	This program and the accompanying materials\r
	12	are licensed and made available under the terms and conditions of the BSD License\r
	13	which accompanies this distribution. The full text of the license may be found at\r
	14	http://opensource.org/licenses/bsd-license.php.\r
	15	\r
	16	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
	17	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
	18	\r
	19	**/\r
	20	\r
	21	#include <Base.h>\r
	22	#include <Library/DebugLib.h>\r
	23	#include <Library/BaseLib.h>\r
	24	#include <Library/PrintLib.h>\r
	25	#include <Library/PcdLib.h>\r
	26	#include <Library/BaseMemoryLib.h>\r
	27	#include <Library/SerialPortLib.h>\r
	28	#include <Library/DebugPrintErrorLevelLib.h>\r
	29	\r
	30	//\r
	31	// Define the maximum debug and assert message length that this library supports\r
	32	//\r
	33	#define MAX_DEBUG_MESSAGE_LENGTH 0x100\r
	34	\r
	35	//\r
	36	// VA_LIST can not initialize to NULL for all compiler, so we use this to\r
	37	// indicate a null VA_LIST\r
	38	//\r
	39	VA_LIST mVaListNull;\r
	40	\r
	41	/**\r
	42	The constructor function initialize the Serial Port Library\r
	43	\r
	44	@retval EFI_SUCCESS The constructor always returns RETURN_SUCCESS.\r
	45	\r
	46	**/\r
	47	RETURN_STATUS\r
	48	EFIAPI\r
	49	BaseDebugLibSerialPortConstructor (\r
	50	VOID\r
	51	)\r
	52	{\r
	53	return SerialPortInitialize ();\r
	54	}\r
	55	\r
	56	/**\r
	57	Prints a debug message to the debug output device if the specified error level is enabled.\r
	58	\r
	59	If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
	60	GetDebugPrintErrorLevel (), then print the message specified by Format and the\r
	61	associated variable argument list to the debug output device.\r
	62	\r
	63	If Format is NULL, then ASSERT().\r
	64	\r
	65	@param ErrorLevel The error level of the debug message.\r
	66	@param Format Format string for the debug message to print.\r
	67	@param ... Variable argument list whose contents are accessed\r
	68	based on the format string specified by Format.\r
	69	\r
	70	**/\r
	71	VOID\r
	72	EFIAPI\r
	73	DebugPrint (\r
	74	IN UINTN ErrorLevel,\r
	75	IN CONST CHAR8 *Format,\r
	76	...\r
	77	)\r
	78	{\r
	79	VA_LIST Marker;\r
	80	\r
	81	VA_START (Marker, Format);\r
	82	DebugVPrint (ErrorLevel, Format, Marker);\r
	83	VA_END (Marker);\r
	84	}\r
	85	\r
	86	\r
	87	/**\r
	88	Prints a debug message to the debug output device if the specified\r
	89	error level is enabled base on Null-terminated format string and a\r
	90	VA_LIST argument list or a BASE_LIST argument list.\r
	91	\r
	92	If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
	93	GetDebugPrintErrorLevel (), then print the message specified by Format and\r
	94	the associated variable argument list to the debug output device.\r
	95	\r
	96	If Format is NULL, then ASSERT().\r
	97	\r
	98	@param ErrorLevel The error level of the debug message.\r
	99	@param Format Format string for the debug message to print.\r
	100	@param VaListMarker VA_LIST marker for the variable argument list.\r
	101	@param BaseListMarker BASE_LIST marker for the variable argument list.\r
	102	\r
	103	**/\r
	104	VOID\r
	105	DebugPrintMarker (\r
	106	IN UINTN ErrorLevel,\r
	107	IN CONST CHAR8 *Format,\r
	108	IN VA_LIST VaListMarker,\r
	109	IN BASE_LIST BaseListMarker\r
	110	)\r
	111	{\r
	112	CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
	113	\r
	114	//\r
	115	// If Format is NULL, then ASSERT().\r
	116	//\r
	117	ASSERT (Format != NULL);\r
	118	\r
	119	//\r
	120	// Check driver debug mask value and global mask\r
	121	//\r
	122	if ((ErrorLevel & GetDebugPrintErrorLevel ()) == 0) {\r
	123	return;\r
	124	}\r
	125	\r
	126	//\r
	127	// Convert the DEBUG() message to an ASCII String\r
	128	//\r
	129	if (BaseListMarker == NULL) {\r
	130	AsciiVSPrint (Buffer, sizeof (Buffer), Format, VaListMarker);\r
	131	} else {\r
	132	AsciiBSPrint (Buffer, sizeof (Buffer), Format, BaseListMarker);\r
	133	}\r
	134	\r
	135	//\r
	136	// Send the print string to a Serial Port\r
	137	//\r
	138	SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));\r
	139	}\r
	140	\r
	141	\r
	142	/**\r
	143	Prints a debug message to the debug output device if the specified\r
	144	error level is enabled.\r
	145	\r
	146	If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
	147	GetDebugPrintErrorLevel (), then print the message specified by Format and\r
	148	the associated variable argument list to the debug output device.\r
	149	\r
	150	If Format is NULL, then ASSERT().\r
	151	\r
	152	@param ErrorLevel The error level of the debug message.\r
	153	@param Format Format string for the debug message to print.\r
	154	@param VaListMarker VA_LIST marker for the variable argument list.\r
	155	\r
	156	**/\r
	157	VOID\r
	158	EFIAPI\r
	159	DebugVPrint (\r
	160	IN UINTN ErrorLevel,\r
	161	IN CONST CHAR8 *Format,\r
	162	IN VA_LIST VaListMarker\r
	163	)\r
	164	{\r
	165	DebugPrintMarker (ErrorLevel, Format, VaListMarker, NULL);\r
	166	}\r
	167	\r
	168	\r
	169	/**\r
	170	Prints a debug message to the debug output device if the specified\r
	171	error level is enabled.\r
	172	This function use BASE_LIST which would provide a more compatible\r
	173	service than VA_LIST.\r
	174	\r
	175	If any bit in ErrorLevel is also set in DebugPrintErrorLevelLib function\r
	176	GetDebugPrintErrorLevel (), then print the message specified by Format and\r
	177	the associated variable argument list to the debug output device.\r
	178	\r
	179	If Format is NULL, then ASSERT().\r
	180	\r
	181	@param ErrorLevel The error level of the debug message.\r
	182	@param Format Format string for the debug message to print.\r
	183	@param BaseListMarker BASE_LIST marker for the variable argument list.\r
	184	\r
	185	**/\r
	186	VOID\r
	187	EFIAPI\r
	188	DebugBPrint (\r
	189	IN UINTN ErrorLevel,\r
	190	IN CONST CHAR8 *Format,\r
	191	IN BASE_LIST BaseListMarker\r
	192	)\r
	193	{\r
	194	DebugPrintMarker (ErrorLevel, Format, mVaListNull, BaseListMarker);\r
	195	}\r
	196	\r
	197	\r
	198	/**\r
	199	Prints an assert message containing a filename, line number, and description.\r
	200	This may be followed by a breakpoint or a dead loop.\r
	201	\r
	202	Print a message of the form "ASSERT <FileName>(<LineNumber>): <Description>\n"\r
	203	to the debug output device. If DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED bit of\r
	204	PcdDebugProperyMask is set then CpuBreakpoint() is called. Otherwise, if\r
	205	DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED bit of PcdDebugProperyMask is set then\r
	206	CpuDeadLoop() is called. If neither of these bits are set, then this function\r
	207	returns immediately after the message is printed to the debug output device.\r
	208	DebugAssert() must actively prevent recursion. If DebugAssert() is called while\r
	209	processing another DebugAssert(), then DebugAssert() must return immediately.\r
	210	\r
	211	If FileName is NULL, then a <FileName> string of "(NULL) Filename" is printed.\r
	212	If Description is NULL, then a <Description> string of "(NULL) Description" is printed.\r
	213	\r
	214	@param FileName The pointer to the name of the source file that generated the assert condition.\r
	215	@param LineNumber The line number in the source file that generated the assert condition\r
	216	@param Description The pointer to the description of the assert condition.\r
	217	\r
	218	**/\r
	219	VOID\r
	220	EFIAPI\r
	221	DebugAssert (\r
	222	IN CONST CHAR8 *FileName,\r
	223	IN UINTN LineNumber,\r
	224	IN CONST CHAR8 *Description\r
	225	)\r
	226	{\r
	227	CHAR8 Buffer[MAX_DEBUG_MESSAGE_LENGTH];\r
	228	\r
	229	//\r
	230	// Generate the ASSERT() message in Ascii format\r
	231	//\r
	232	AsciiSPrint (Buffer, sizeof (Buffer), "ASSERT [%a] %a(%d): %a\n", gEfiCallerBaseName, FileName, LineNumber, Description);\r
	233	\r
	234	//\r
	235	// Send the print string to the Console Output device\r
	236	//\r
	237	SerialPortWrite ((UINT8 *)Buffer, AsciiStrLen (Buffer));\r
	238	\r
	239	//\r
	240	// Generate a Breakpoint, DeadLoop, or NOP based on PCD settings\r
	241	//\r
	242	if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_BREAKPOINT_ENABLED) != 0) {\r
	243	CpuBreakpoint ();\r
	244	} else if ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_ASSERT_DEADLOOP_ENABLED) != 0) {\r
	245	CpuDeadLoop ();\r
	246	}\r
	247	}\r
	248	\r
	249	\r
	250	/**\r
	251	Fills a target buffer with PcdDebugClearMemoryValue, and returns the target buffer.\r
	252	\r
	253	This function fills Length bytes of Buffer with the value specified by\r
	254	PcdDebugClearMemoryValue, and returns Buffer.\r
	255	\r
	256	If Buffer is NULL, then ASSERT().\r
	257	If Length is greater than (MAX_ADDRESS - Buffer + 1), then ASSERT().\r
	258	\r
	259	@param Buffer The pointer to the target buffer to be filled with PcdDebugClearMemoryValue.\r
	260	@param Length The number of bytes in Buffer to fill with zeros PcdDebugClearMemoryValue.\r
	261	\r
	262	@return Buffer The pointer to the target buffer filled with PcdDebugClearMemoryValue.\r
	263	\r
	264	**/\r
	265	VOID *\r
	266	EFIAPI\r
	267	DebugClearMemory (\r
	268	OUT VOID *Buffer,\r
	269	IN UINTN Length\r
	270	)\r
	271	{\r
	272	//\r
	273	// If Buffer is NULL, then ASSERT().\r
	274	//\r
	275	ASSERT (Buffer != NULL);\r
	276	\r
	277	//\r
	278	// SetMem() checks for the the ASSERT() condition on Length and returns Buffer\r
	279	//\r
	280	return SetMem (Buffer, Length, PcdGet8(PcdDebugClearMemoryValue));\r
	281	}\r
	282	\r
	283	\r
	284	/**\r
	285	Returns TRUE if ASSERT() macros are enabled.\r
	286	\r
	287	This function returns TRUE if the DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of\r
	288	PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
	289	\r
	290	@retval TRUE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is set.\r
	291	@retval FALSE The DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED bit of PcdDebugProperyMask is clear.\r
	292	\r
	293	**/\r
	294	BOOLEAN\r
	295	EFIAPI\r
	296	DebugAssertEnabled (\r
	297	VOID\r
	298	)\r
	299	{\r
	300	return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_ASSERT_ENABLED) != 0);\r
	301	}\r
	302	\r
	303	\r
	304	/**\r
	305	Returns TRUE if DEBUG() macros are enabled.\r
	306	\r
	307	This function returns TRUE if the DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of\r
	308	PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
	309	\r
	310	@retval TRUE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is set.\r
	311	@retval FALSE The DEBUG_PROPERTY_DEBUG_PRINT_ENABLED bit of PcdDebugProperyMask is clear.\r
	312	\r
	313	**/\r
	314	BOOLEAN\r
	315	EFIAPI\r
	316	DebugPrintEnabled (\r
	317	VOID\r
	318	)\r
	319	{\r
	320	return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_PRINT_ENABLED) != 0);\r
	321	}\r
	322	\r
	323	\r
	324	/**\r
	325	Returns TRUE if DEBUG_CODE() macros are enabled.\r
	326	\r
	327	This function returns TRUE if the DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of\r
	328	PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
	329	\r
	330	@retval TRUE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is set.\r
	331	@retval FALSE The DEBUG_PROPERTY_DEBUG_CODE_ENABLED bit of PcdDebugProperyMask is clear.\r
	332	\r
	333	**/\r
	334	BOOLEAN\r
	335	EFIAPI\r
	336	DebugCodeEnabled (\r
	337	VOID\r
	338	)\r
	339	{\r
	340	return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_DEBUG_CODE_ENABLED) != 0);\r
	341	}\r
	342	\r
	343	\r
	344	/**\r
	345	Returns TRUE if DEBUG_CLEAR_MEMORY() macro is enabled.\r
	346	\r
	347	This function returns TRUE if the DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of\r
	348	PcdDebugProperyMask is set. Otherwise FALSE is returned.\r
	349	\r
	350	@retval TRUE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is set.\r
	351	@retval FALSE The DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED bit of PcdDebugProperyMask is clear.\r
	352	\r
	353	**/\r
	354	BOOLEAN\r
	355	EFIAPI\r
	356	DebugClearMemoryEnabled (\r
	357	VOID\r
	358	)\r
	359	{\r
	360	return (BOOLEAN) ((PcdGet8(PcdDebugPropertyMask) & DEBUG_PROPERTY_CLEAR_MEMORY_ENABLED) != 0);\r
	361	}\r
	362	\r
	363	/**\r
	364	Returns TRUE if any one of the bit is set both in ErrorLevel and PcdFixedDebugPrintErrorLevel.\r
	365	\r
	366	This function compares the bit mask of ErrorLevel and PcdFixedDebugPrintErrorLevel.\r
	367	\r
	368	@retval TRUE Current ErrorLevel is supported.\r
	369	@retval FALSE Current ErrorLevel is not supported.\r
	370	\r
	371	**/\r
	372	BOOLEAN\r
	373	EFIAPI\r
	374	DebugPrintLevelEnabled (\r
	375	IN CONST UINTN ErrorLevel\r
	376	)\r
	377	{\r
	378	return (BOOLEAN) ((ErrorLevel & PcdGet32(PcdFixedDebugPrintErrorLevel)) != 0);\r
	379	}\r
	380	\r