+++ /dev/null
-# FLASH layout file for ARM RealView EB.\r
-#\r
-# Copyright (c) 2009 - 2010, Apple Inc. All rights reserved.<BR>\r
-# Copyright (c) 2011 - 2015, ARM Limited. All rights reserved.\r
-#\r
-# This program and the accompanying materials\r
-# are licensed and made available under the terms and conditions of the BSD License\r
-# which accompanies this distribution. The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-#\r
-\r
-################################################################################\r
-#\r
-# FD Section\r
-# The [FD] Section is made up of the definition statements and a\r
-# description of what goes into the Flash Device Image. Each FD section\r
-# defines one flash "device" image. A flash device image may be one of\r
-# the following: Removable media bootable image (like a boot floppy\r
-# image,) an Option ROM image (that would be "flashed" into an add-in\r
-# card,) a System "Flash" image (that would be burned into a system's\r
-# flash) or an Update ("Capsule") image that will be used to update and\r
-# existing system flash.\r
-#\r
-################################################################################\r
-\r
-\r
-[FD.ArmRealViewEb_EFI]\r
-BaseAddress = 0x40000000|gArmTokenSpaceGuid.PcdFdBaseAddress\r
-Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize\r
-ErasePolarity = 1\r
-BlockSize = 0x00010000\r
-NumBlocks = 0x20\r
-\r
-################################################################################\r
-#\r
-# Following are lists of FD Region layout which correspond to the locations of different\r
-# images within the flash device.\r
-#\r
-# Regions must be defined in ascending order and may not overlap.\r
-#\r
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
-# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
-# "0x" characters. Like:\r
-# Offset|Size\r
-# PcdOffsetCName|PcdSizeCName\r
-# RegionType <FV, DATA, or FILE>\r
-#\r
-################################################################################\r
-\r
-0x00000000|0x00050000\r
-gArmTokenSpaceGuid.PcdSecureFvBaseAddress|gArmTokenSpaceGuid.PcdSecureFvSize\r
-FV = FVMAIN_SEC\r
-\r
-0x00050000|0x00150000\r
-gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize\r
-FV = FVMAIN_COMPACT\r
-\r
-################################################################################\r
-#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
-#\r
-################################################################################\r
-\r
-[FV.FVMAIN_SEC]\r
-FvAlignment = 8\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
- INF ArmPlatformPkg/Sec/Sec.inf\r
-\r
-\r
-[FV.FvMain]\r
-BlockSize = 0x40\r
-NumBlocks = 0 # This FV gets compressed so make it just big enough\r
-FvAlignment = 8 # FV alignment and FV attributes setting.\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-FvNameGuid = 14801114-da6a-4113-985b-dc876337a15e\r
-\r
- INF MdeModulePkg/Core/Dxe/DxeMain.inf\r
-\r
- #\r
- # PI DXE Drivers producing Architectural Protocols (EFI Services)\r
- #\r
- INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf\r
- INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
- INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
- INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
- INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
- INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
- INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
- INF EmbeddedPkg/EmbeddedMonotonicCounter/EmbeddedMonotonicCounter.inf\r
- INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf\r
- INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf\r
- INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf\r
-\r
- INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
- INF ArmPlatformPkg/Drivers/LcdGraphicsOutputDxe/PL111LcdGraphicsOutputDxe.inf\r
-\r
- #\r
- # Multiple Console IO support\r
- #\r
- INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf\r
- INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf\r
- INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf\r
- INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf\r
- INF EmbeddedPkg/SerialDxe/SerialDxe.inf\r
-\r
- INF ArmPkg/Drivers/ArmGic/ArmGicDxe.inf\r
- INF ArmPlatformPkg/Drivers/SP804TimerDxe/SP804TimerDxe.inf\r
-\r
- INF ArmPlatformPkg/Drivers/NorFlashDxe/NorFlashDxe.inf\r
-\r
- #\r
- # Semi-hosting filesystem\r
- #\r
- INF ArmPkg/Filesystem/SemihostFs/SemihostFs.inf\r
-\r
- #\r
- # Multimedia Card Interface\r
- #\r
- INF EmbeddedPkg/Universal/MmcDxe/MmcDxe.inf\r
- INF ArmPlatformPkg/Drivers/PL180MciDxe/PL180MciDxe.inf\r
-\r
- # FV Filesystem\r
- INF MdeModulePkg/Universal/FvSimpleFileSystemDxe/FvSimpleFileSystemDxe.inf\r
-\r
- #\r
- # FAT filesystem + GPT/MBR partitioning\r
- #\r
- INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf\r
- INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf\r
- INF FatBinPkg/EnhancedFatDxe/Fat.inf\r
- INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf\r
-\r
- #\r
- # UEFI application (Shell Embedded Boot Loader)\r
- #\r
- INF ShellBinPkg/UefiShell/UefiShell.inf\r
-\r
- #\r
- # Bds\r
- #\r
- INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
- INF ArmPlatformPkg/Bds/Bds.inf\r
-\r
- # Legacy Linux Loader\r
- INF ArmPkg/Application/LinuxLoader/LinuxLoader.inf\r
-\r
-\r
-[FV.FVMAIN_COMPACT]\r
-FvAlignment = 8\r
-ERASE_POLARITY = 1\r
-MEMORY_MAPPED = TRUE\r
-STICKY_WRITE = TRUE\r
-LOCK_CAP = TRUE\r
-LOCK_STATUS = TRUE\r
-WRITE_DISABLED_CAP = TRUE\r
-WRITE_ENABLED_CAP = TRUE\r
-WRITE_STATUS = TRUE\r
-WRITE_LOCK_CAP = TRUE\r
-WRITE_LOCK_STATUS = TRUE\r
-READ_DISABLED_CAP = TRUE\r
-READ_ENABLED_CAP = TRUE\r
-READ_STATUS = TRUE\r
-READ_LOCK_CAP = TRUE\r
-READ_LOCK_STATUS = TRUE\r
-\r
-!if $(EDK2_SKIP_PEICORE) == 1\r
- INF ArmPlatformPkg/PrePi/PeiUniCore.inf\r
-!else\r
- INF ArmPlatformPkg/PrePeiCore/PrePeiCoreUniCore.inf\r
- INF MdeModulePkg/Core/Pei/PeiMain.inf\r
- INF ArmPlatformPkg/PlatformPei/PlatformPeim.inf\r
- INF ArmPlatformPkg/MemoryInitPei/MemoryInitPeim.inf\r
- INF ArmPkg/Drivers/CpuPei/CpuPei.inf\r
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
- INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
- INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf\r
- INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
-!endif\r
-\r
- FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
- SECTION FV_IMAGE = FVMAIN\r
- }\r
- }\r
-\r
-################################################################################\r
-#\r
-# Rules are use with the [FV] section's module INF type to define\r
-# how an FFS file is created for a given INF file. The following Rule are the default\r
-# rules for the different module type. User can add the customized rules to define the\r
-# content of the FFS file.\r
-#\r
-################################################################################\r
-\r
-\r
-############################################################################\r
-# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #\r
-############################################################################\r
-#\r
-#[Rule.Common.DXE_DRIVER]\r
-# FILE DRIVER = $(NAMED_GUID) {\r
-# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
-# COMPRESS PI_STD {\r
-# GUIDED {\r
-# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
-# UI STRING="$(MODULE_NAME)" Optional\r
-# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
-# }\r
-# }\r
-# }\r
-#\r
-############################################################################\r
-\r
-[Rule.Common.SEC]\r
- FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED {\r
- TE TE Align = 32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- }\r
-\r
-[Rule.Common.PEI_CORE]\r
- FILE PEI_CORE = $(NAMED_GUID) {\r
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING ="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.PEIM]\r
- FILE PEIM = $(NAMED_GUID) {\r
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- TE TE $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.PEIM.TIANOCOMPRESSED]\r
- FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {\r
- PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
- }\r
-\r
-[Rule.Common.DXE_CORE]\r
- FILE DXE_CORE = $(NAMED_GUID) {\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.UEFI_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.DXE_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.DXE_RUNTIME_DRIVER]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- UI STRING ="$(MODULE_NAME)" Optional\r
- PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
- }\r
-\r
-[Rule.Common.UEFI_DRIVER.BINARY]\r
- FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
-[Rule.Common.UEFI_APPLICATION.BINARY]\r
- FILE APPLICATION = $(NAMED_GUID) {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
projects / mirror_edk2.git / blobdiff