ArmPlatformPkg: Introduced 'ArmPlatformSecLib'

[mirror_edk2.git] / ArmPlatformPkg / ArmVExpressPkg / Library / ArmVExpressLibRTSM / RTSMSec.c

diff --git a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibRTSM/RTSMSec.c b/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibRTSM/RTSMSec.c
deleted file mode 100644 (file)
index c65c28c..0000000
--- a/ArmPlatformPkg/ArmVExpressPkg/Library/ArmVExpressLibRTSM/RTSMSec.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/** @file
-*
-*  Copyright (c) 2011-2012, ARM Limited. All rights reserved.
-*  
-*  This program and the accompanying materials                          
-*  are licensed and made available under the terms and conditions of the BSD License         
-*  which accompanies this distribution.  The full text of the license may be found at        
-*  http://opensource.org/licenses/bsd-license.php                                            
-*
-*  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
-*  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             
-*
-**/
-
-#include <Library/IoLib.h>
-#include <Library/ArmPlatformLib.h>
-#include <Library/DebugLib.h>
-#include <Library/PcdLib.h>
-
-#include <Drivers/PL310L2Cache.h>
-#include <Drivers/SP804Timer.h>
-
-#include <ArmPlatform.h>
-
-/**
-  Initialize the Secure peripherals and memory regions
-
-  If Trustzone is supported by your platform then this function makes the required initialization
-  of the secure peripherals and memory regions.
-
-**/
-VOID
-ArmPlatformTrustzoneInit (
-  IN  UINTN                     MpId
-  )
-{
-  // No TZPC or TZASC on RTSM to initialize
-}
-
-/**
-  Initialize controllers that must setup at the early stage
-
-  Some peripherals must be initialized in Secure World.
-  For example, some L2x0 requires to be initialized in Secure World
-
-**/
-VOID
-ArmPlatformSecInitialize (
-  VOID
-  )
-{
-  // Configure periodic timer (TIMER0) for 1MHz operation
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER0_TIMCLK);
-  // Configure 1MHz clock
-  MmioOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER1_TIMCLK);
-  // Configure SP810 to use 1MHz clock and disable
-  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);
-  // Configure SP810 to use 1MHz clock and disable
-  MmioAndThenOr32 (SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER3_EN, SP810_SYS_CTRL_TIMER3_TIMCLK);
-}
-
-/**
-  Call before jumping to Normal World
-
-  This function allows the firmware platform to do extra actions before
-  jumping to the Normal World
-
-**/
-VOID
-ArmPlatformSecExtraAction (
-  IN  UINTN         MpId,
-  OUT UINTN*        JumpAddress
-  )
-{
-  *JumpAddress = PcdGet32(PcdFvBaseAddress);
-}