]> git.proxmox.com Git - mirror_edk2.git/blobdiff - EdkCompatibilityPkg/Compatibility/MpServicesOnFrameworkMpServicesThunk/X64/MpFuncs.S
EdkCompatibilityPkg: Remove EdkCompatibilityPkg
[mirror_edk2.git] / EdkCompatibilityPkg / Compatibility / MpServicesOnFrameworkMpServicesThunk / X64 / MpFuncs.S
diff --git a/EdkCompatibilityPkg/Compatibility/MpServicesOnFrameworkMpServicesThunk/X64/MpFuncs.S b/EdkCompatibilityPkg/Compatibility/MpServicesOnFrameworkMpServicesThunk/X64/MpFuncs.S
deleted file mode 100644 (file)
index 9585d32..0000000
+++ /dev/null
@@ -1,210 +0,0 @@
-#------------------------------------------------------------------------------\r
-# X64 assembly file for AP startup vector.\r
-#\r
-# Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR>\r
-# This program and the accompanying materials\r
-# are licensed and made available under the terms and conditions of the BSD License\r
-# which accompanies this distribution.  The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-#\r
-#------------------------------------------------------------------------------\r
-\r
-\r
-.set                   VacantFlag,       0x0\r
-.set                   NotVacantFlag,    0xff\r
-\r
-.set                   LockLocation,              RendezvousFunnelProcEnd - RendezvousFunnelProcStart\r
-.set                   StackStartAddressLocation, RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x08\r
-.set                   StackSizeLocation,         RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x10\r
-.set                   CProcedureLocation,        RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x18\r
-.set                   GdtrLocation,              RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x20\r
-.set                   IdtrLocation,              RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x2A\r
-.set                   BufferStartLocation,       RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x34\r
-.set                   Cr3OffsetLocation,         RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x38\r
-.set                   ProcessorNumberLocation,   RendezvousFunnelProcEnd - RendezvousFunnelProcStart + 0x38\r
-\r
-#-------------------------------------------------------------------------------------\r
-\r
-#-------------------------------------------------------------------------------------\r
-#RendezvousFunnelProc  procedure follows. All APs execute their procedure. This\r
-#procedure serializes all the AP processors through an Init sequence. It must be\r
-#noted that APs arrive here very raw...ie: real mode, no stack.\r
-#ALSO THIS PROCEDURE IS EXECUTED BY APs ONLY ON 16 BIT MODE. HENCE THIS PROC\r
-#IS IN MACHINE CODE.\r
-#-------------------------------------------------------------------------------------\r
-#RendezvousFunnelProc (&WakeUpBuffer,MemAddress);\r
-\r
-.text\r
-\r
-ASM_GLOBAL ASM_PFX(RendezvousFunnelProc)\r
-ASM_PFX(RendezvousFunnelProc):\r
-RendezvousFunnelProcStart:\r
-\r
-# At this point CS = 0x(vv00) and ip= 0x0.\r
-\r
-        .byte 0x8c,0xc8               # mov        ax,  cs\r
-        .byte 0x8e,0xd8               # mov        ds,  ax\r
-        .byte 0x8e,0xc0               # mov        es,  ax\r
-        .byte 0x8e,0xd0               # mov        ss,  ax \r
-        .byte 0x33,0xc0               # xor        ax,  ax\r
-        .byte 0x8e,0xe0               # mov        fs,  ax\r
-        .byte 0x8e,0xe8               # mov        gs,  ax\r
-\r
-# Switch to flat mode.\r
-\r
-        .byte 0xBE\r
-        .word BufferStartLocation\r
-        .byte 0x66,0x8B,0x14          # mov        edx,dword ptr [si]          ; EDX is keeping the start address of wakeup buffer\r
-\r
-        .byte 0xBE\r
-        .word Cr3OffsetLocation\r
-        .byte 0x66,0x8B,0xC           # mov        ecx,dword ptr [si]          ; ECX is keeping the value of CR3\r
-\r
-        .byte 0xBE\r
-        .word GdtrLocation\r
-        .byte 0x66                    # db         66h\r
-        .byte 0x2E,0xF,0x1,0x14       # lgdt       fword ptr cs:[si]\r
-\r
-        .byte 0xBE\r
-        .word IdtrLocation\r
-        .byte 0x66                    # db         66h\r
-        .byte 0x2E,0xF,0x1,0x1C       # lidt       fword ptr cs:[si]\r
-\r
-        .byte 0x33,0xC0               # xor        ax,  ax\r
-        .byte 0x8E,0xD8               # mov        ds,  ax\r
-\r
-        .byte 0xF,0x20,0xC0           # mov        eax, cr0                    ; Get control register 0\r
-        .byte 0x66,0x83,0xC8,0x1      # or         eax, 000000001h             ; Set PE bit (bit #0)\r
-        .byte 0xF,0x22,0xC0           # mov        cr0, eax\r
-\r
-FLAT32_JUMP:\r
-\r
-        .byte 0x66,0x67,0xEA          # far jump\r
-        .long 0x0                     # 32-bit offset\r
-        .word 0x20                    # 16-bit selector\r
-\r
-ProtectedModeStart:\r
-\r
-        .byte 0x66,0xB8,0x18,0x0      # mov        ax,  18h\r
-        .byte 0x66,0x8E,0xD8          # mov        ds,  ax\r
-        .byte 0x66,0x8E,0xC0          # mov        es,  ax\r
-        .byte 0x66,0x8E,0xE0          # mov        fs,  ax\r
-        .byte 0x66,0x8E,0xE8          # mov        gs,  ax\r
-        .byte 0x66,0x8E,0xD0          # mov        ss,  ax                     ; Flat mode setup.\r
-\r
-        .byte 0xF,0x20,0xE0           # mov        eax, cr4\r
-        .byte 0xF,0xBA,0xE8,0x5       # bts        eax, 5\r
-        .byte 0xF,0x22,0xE0           # mov        cr4, eax\r
-\r
-        .byte 0xF,0x22,0xD9           # mov        cr3, ecx\r
-\r
-        .byte 0x8B,0xF2               # mov        esi, edx                    ; Save wakeup buffer address\r
-\r
-        .byte 0xB9\r
-        .long 0xC0000080              # mov        ecx, 0c0000080h             ; EFER MSR number.\r
-        .byte 0xF,0x32                # rdmsr                                  ; Read EFER.\r
-        .byte 0xF,0xBA,0xE8,0x8       # bts        eax, 8                      ; Set LME=1.\r
-        .byte 0xF,0x30                # wrmsr                                  ; Write EFER.\r
-\r
-        .byte 0xF,0x20,0xC0           # mov        eax, cr0                    ; Read CR0.\r
-        .byte 0xF,0xBA,0xE8,0x1F      # bts        eax, 31                     ; Set PG=1.\r
-        .byte 0xF,0x22,0xC0           # mov        cr0, eax                    ; Write CR0.\r
-\r
-LONG_JUMP:\r
-\r
-        .byte 0x67,0xEA               # far jump\r
-        .long 0x0                     # 32-bit offset\r
-        .word 0x38                    # 16-bit selector\r
-\r
-LongModeStart:\r
-\r
-        movw        $0x30,%ax\r
-        .byte       0x66\r
-        movw        %ax,%ds\r
-        .byte       0x66\r
-        movw        %ax,%es\r
-        .byte       0x66\r
-        movw        %ax,%ss\r
-\r
-        #\r
-        # ProgramStack\r
-        #\r
-        movl        $0x1b, %ecx\r
-        rdmsr\r
-\r
-        btl         $10, %eax         # Check for x2apic mode\r
-        jnc         LegacyApicMode\r
-        movl        $0x802, %ecx      # Read APIC_ID\r
-        rdmsr\r
-        movl        %eax, %ebx        # ebx == apicid\r
-        jmp         GetCpuNumber\r
-\r
-LegacyApicMode:\r
-        andl        $0xfffff000, %eax\r
-        addl        $0x20, %eax\r
-        movl        (%eax), %ebx\r
-        shrl        $24, %ebx         # ebx == apicid\r
-        \r
-GetCpuNumber:        \r
-        xorq        %rcx, %rcx\r
-        movl        %esi,%edi\r
-        addl        $ProcessorNumberLocation, %edi\r
-        movl        (%edi, %ebx, 4), %ecx\r
-\r
-        movl        %esi,%edi\r
-        addl        $StackSizeLocation, %edi\r
-        movq        (%edi), %rax\r
-        incq        %rcx\r
-        mulq        %rcx\r
-\r
-        movl        %esi,%edi\r
-        addl        $StackStartAddressLocation, %edi\r
-        movq        (%edi), %rbx\r
-        addq        %rbx, %rax\r
-\r
-        movq        %rax, %rsp\r
-\r
-        #\r
-        # Call C Function\r
-        #\r
-        movl        %esi,%edi\r
-        addl        $CProcedureLocation, %edi\r
-        movq        (%edi), %rax\r
-\r
-        testq       %rax, %rax\r
-        jz          GoToSleep\r
-\r
-        subq        $0x20, %rsp\r
-        call        *%rax\r
-        addq        $0x20, %rsp\r
-\r
-GoToSleep:\r
-\r
-        cli\r
-        hlt\r
-        jmp         .-2\r
-\r
-RendezvousFunnelProcEnd:\r
-\r
-\r
-#-------------------------------------------------------------------------------------\r
-#  AsmGetAddressMap (&AddressMap);\r
-#-------------------------------------------------------------------------------------\r
-# comments here for definition of address map\r
-ASM_GLOBAL ASM_PFX(AsmGetAddressMap)\r
-ASM_PFX(AsmGetAddressMap):\r
-#ifdef __APPLE__\r
-        int          $3\r
-#else\r
-        movq         $RendezvousFunnelProcStart, %rax\r
-        movq         %rax, (%rcx)\r
-        movq         $(ProtectedModeStart - RendezvousFunnelProcStart), 0x08(%rcx)\r
-        movq         $(FLAT32_JUMP - RendezvousFunnelProcStart), 0x10(%rcx)\r
-        movq         $(LongModeStart - RendezvousFunnelProcStart), 0x18(%rcx)\r
-        movq         $(LONG_JUMP - RendezvousFunnelProcStart), 0x20(%rcx)\r
-        movq         $(RendezvousFunnelProcEnd - RendezvousFunnelProcStart), 0x28(%rcx)\r
-#endif\r
-        ret\r