--- /dev/null
+/** @file\r
+*\r
+* Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
+*\r
+* This program and the accompanying materials\r
+* are licensed and made available under the terms and conditions of the BSD License\r
+* which accompanies this distribution. The full text of the license may be found at\r
+* http://opensource.org/licenses/bsd-license.php\r
+*\r
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+*\r
+**/\r
+\r
+#include "SataSiI3132.h"\r
+\r
+#include <IndustryStandard/Atapi.h>\r
+#include <Library/DevicePathLib.h>\r
+\r
+SATA_SI3132_DEVICE*\r
+GetSataDevice (\r
+ IN SATA_SI3132_INSTANCE* SataInstance,\r
+ IN UINT16 Port,\r
+ IN UINT16 PortMultiplierPort\r
+) {\r
+ LIST_ENTRY *List;\r
+ SATA_SI3132_PORT *SataPort;\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+\r
+ if (Port >= SATA_SII3132_MAXPORT) {\r
+ return NULL;\r
+ }\r
+\r
+ SataPort = &(SataInstance->Ports[Port]);\r
+ List = SataPort->Devices.ForwardLink;\r
+\r
+ while (List != &SataPort->Devices) {\r
+ SataDevice = (SATA_SI3132_DEVICE*)List;\r
+ if (SataDevice->Index == PortMultiplierPort) {\r
+ return SataDevice;\r
+ }\r
+ List = List->ForwardLink;\r
+ }\r
+ return NULL;\r
+}\r
+\r
+EFI_STATUS\r
+SiI3132AtaPassThruCommand (\r
+ IN SATA_SI3132_INSTANCE *SataSiI3132Instance,\r
+ IN SATA_SI3132_PORT *SataPort,\r
+ IN UINT16 PortMultiplierPort,\r
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,\r
+ IN EFI_EVENT Event OPTIONAL\r
+ )\r
+{\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+ EFI_PHYSICAL_ADDRESS PhysInDataBuffer;\r
+ UINTN InDataBufferLength = 0;\r
+ EFI_PHYSICAL_ADDRESS PhysOutDataBuffer;\r
+ UINTN OutDataBufferLength;\r
+ CONST UINTN EmptySlot = 0;\r
+ UINTN Control = PRB_CTRL_ATA;\r
+ UINTN Protocol = 0;\r
+ UINT32 Value32, Error, Timeout = 0;\r
+ CONST UINT32 IrqMask = (SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR) << 16;\r
+ EFI_STATUS Status;\r
+ VOID* PciAllocMapping = NULL;\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+\r
+ PciIo = SataSiI3132Instance->PciIo;\r
+ ZeroMem (SataPort->HostPRB, sizeof (SATA_SI3132_PRB));\r
+\r
+ // Construct Si3132 PRB\r
+ switch (Packet->Protocol) {\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_ATA_HARDWARE_RESET:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_ATA_SOFTWARE_RESET:\r
+ SATA_TRACE ("SiI3132AtaPassThru() EFI_ATA_PASS_THRU_PROTOCOL_ATA_SOFTWARE_RESET");\r
+ Control = PRB_CTRL_SRST;\r
+\r
+ if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {\r
+ SataPort->HostPRB->Fis.Control = 0x0F;\r
+ }\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_ATA_NON_DATA:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+\r
+ // There is no difference for SiI3132 between PIO and DMA invokation\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_IN:\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_IN:\r
+ // Fixup the size for block transfer. Following UEFI Specification, 'InTransferLength' should\r
+ // be in number of bytes. But for most data transfer commands, the value is in number of blocks\r
+ if (Packet->Acb->AtaCommand == ATA_CMD_IDENTIFY_DRIVE) {\r
+ InDataBufferLength = Packet->InTransferLength;\r
+ } else {\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);\r
+ if (!SataDevice || (SataDevice->BlockSize == 0)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ InDataBufferLength = Packet->InTransferLength * SataDevice->BlockSize;\r
+ }\r
+\r
+ Status = PciIo->Map (\r
+ PciIo, EfiPciIoOperationBusMasterRead,\r
+ Packet->InDataBuffer, &InDataBufferLength, &PhysInDataBuffer, &PciAllocMapping\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ // Construct SGEs (32-bit system)\r
+ SataPort->HostPRB->Sge[0].DataAddressLow = (UINT32)PhysInDataBuffer;\r
+ SataPort->HostPRB->Sge[0].DataAddressHigh = (UINT32)(PhysInDataBuffer >> 32);\r
+ SataPort->HostPRB->Sge[0].Attributes = SGE_TRM; // Only one SGE\r
+ SataPort->HostPRB->Sge[0].DataCount = InDataBufferLength;\r
+\r
+ // Copy the Ata Command Block\r
+ CopyMem (&SataPort->HostPRB->Fis, Packet->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));\r
+\r
+ // Fixup the FIS\r
+ SataPort->HostPRB->Fis.FisType = 0x27; // Register - Host to Device FIS\r
+ SataPort->HostPRB->Fis.Control = 1 << 7; // Is a command\r
+ if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {\r
+ SataPort->HostPRB->Fis.Control |= PortMultiplierPort & 0xFF;\r
+ }\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_UDMA_DATA_OUT:\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_PIO_DATA_OUT:\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);\r
+ if (!SataDevice || (SataDevice->BlockSize == 0)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ // Fixup the size for block transfer. Following UEFI Specification, 'InTransferLength' should\r
+ // be in number of bytes. But for most data transfer commands, the value is in number of blocks\r
+ OutDataBufferLength = Packet->OutTransferLength * SataDevice->BlockSize;\r
+\r
+ Status = PciIo->Map (\r
+ PciIo, EfiPciIoOperationBusMasterWrite,\r
+ Packet->OutDataBuffer, &OutDataBufferLength, &PhysOutDataBuffer, &PciAllocMapping\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
+\r
+ // Construct SGEs (32-bit system)\r
+ SataPort->HostPRB->Sge[0].DataAddressLow = (UINT32)PhysOutDataBuffer;\r
+ SataPort->HostPRB->Sge[0].DataAddressHigh = (UINT32)(PhysOutDataBuffer >> 32);\r
+ SataPort->HostPRB->Sge[0].Attributes = SGE_TRM; // Only one SGE\r
+ SataPort->HostPRB->Sge[0].DataCount = OutDataBufferLength;\r
+\r
+ // Copy the Ata Command Block\r
+ CopyMem (&SataPort->HostPRB->Fis, Packet->Acb, sizeof (EFI_ATA_COMMAND_BLOCK));\r
+\r
+ // Fixup the FIS\r
+ SataPort->HostPRB->Fis.FisType = 0x27; // Register - Host to Device FIS\r
+ SataPort->HostPRB->Fis.Control = 1 << 7; // Is a command\r
+ if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {\r
+ SataPort->HostPRB->Fis.Control |= PortMultiplierPort & 0xFF;\r
+ }\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_DMA:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_DMA_QUEUED:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_DIAGNOSTIC:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_DEVICE_RESET:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_FPDMA:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ case EFI_ATA_PASS_THRU_PROTOCOL_RETURN_RESPONSE:\r
+ ASSERT (0); //TODO: Implement me!\r
+ break;\r
+ default:\r
+ ASSERT (0);\r
+ break;\r
+ }\r
+\r
+ SataPort->HostPRB->Control = Control;\r
+ SataPort->HostPRB->ProtocolOverride = Protocol;\r
+\r
+ // Clear IRQ\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, IrqMask);\r
+\r
+ if (!FeaturePcdGet (PcdSataSiI3132FeatureDirectCommandIssuing)) {\r
+ // Indirect Command Issuance\r
+\r
+ //TODO: Find which slot is free (maybe use the Cmd FIFO)\r
+ //SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_CMDEXECFIFO_REG, &EmptySlot);\r
+\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDACTIV_REG + (EmptySlot * 8),\r
+ (UINT32)(SataPort->PhysAddrHostPRB & 0xFFFFFFFF));\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDACTIV_REG + (EmptySlot * 8) + 4,\r
+ (UINT32)((SataPort->PhysAddrHostPRB >> 32) & 0xFFFFFFFF));\r
+ } else {\r
+ // Direct Command Issuance\r
+ Status = PciIo->Mem.Write (PciIo, EfiPciIoWidthUint32, 1, // Bar 1\r
+ SataPort->RegBase + (EmptySlot * 0x80),\r
+ sizeof (SATA_SI3132_PRB) / 4,\r
+ SataPort->HostPRB);\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CMDEXECFIFO_REG, EmptySlot);\r
+ }\r
+\r
+#if 0\r
+ // Could need to be implemented if we run multiple command in parallel to know which slot has been completed\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_SLOTSTATUS_REG, &Value32);\r
+ Timeout = Packet->Timeout;\r
+ while (!Timeout && !Value32) {\r
+ gBS->Stall (1);\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_SLOTSTATUS_REG, &Value32);\r
+ Timeout--;\r
+ }\r
+#else\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);\r
+ if (!Packet->Timeout) {\r
+ while (!(Value32 & IrqMask)) {\r
+ gBS->Stall (1);\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);\r
+ }\r
+ } else {\r
+ Timeout = Packet->Timeout;\r
+ while (Timeout && !(Value32 & IrqMask)) {\r
+ gBS->Stall (1);\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);\r
+ Timeout--;\r
+ }\r
+ }\r
+#endif\r
+ // Fill Packet Ata Status Block\r
+ Status = PciIo->Mem.Read (PciIo, EfiPciIoWidthUint32, 1, // Bar 1\r
+ SataPort->RegBase + 0x08,\r
+ sizeof (EFI_ATA_STATUS_BLOCK) / 4,\r
+ Packet->Asb);\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+\r
+ if ((Packet->Timeout != 0) && (Timeout == 0)) {\r
+ DEBUG ((EFI_D_ERROR, "SiI3132AtaPassThru() Err:Timeout\n"));\r
+ //ASSERT (0);\r
+ return EFI_TIMEOUT;\r
+ } else if (Value32 & (SII3132_PORT_INT_CMDERR << 16)) {\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_CMDERROR_REG, &Error);\r
+ DEBUG ((EFI_D_ERROR, "SiI3132AtaPassThru() CmdErr:0x%X (SiI3132 Err:0x%X)\n", Value32, Error));\r
+ ASSERT (0);\r
+ return EFI_DEVICE_ERROR;\r
+ } else if (Value32 & (SII3132_PORT_INT_CMDCOMPL << 16)) {\r
+ // Clear Command Complete\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, SII3132_PORT_INT_CMDCOMPL << 16);\r
+\r
+ if (PciAllocMapping) {\r
+ Status = PciIo->Unmap (PciIo, PciAllocMapping);\r
+ ASSERT (!EFI_ERROR (Status));\r
+ }\r
+\r
+ // If the command was ATA_CMD_IDENTIFY_DRIVE then we need to update the BlockSize\r
+ if (Packet->Acb->AtaCommand == ATA_CMD_IDENTIFY_DRIVE) {\r
+ ATA_IDENTIFY_DATA *IdentifyData = (ATA_IDENTIFY_DATA*)Packet->InDataBuffer;\r
+\r
+ // Get the corresponding Block Device\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, SataPort->Index, PortMultiplierPort);\r
+\r
+ // Check logical block size\r
+ if ((IdentifyData->phy_logic_sector_support & BIT12) != 0) {\r
+ ASSERT (SataDevice != NULL);\r
+ SataDevice->BlockSize = (UINT32) (((IdentifyData->logic_sector_size_hi << 16) |\r
+ IdentifyData->logic_sector_size_lo) * sizeof (UINT16));\r
+ } else {\r
+ SataDevice->BlockSize = 0x200;\r
+ }\r
+ }\r
+ return EFI_SUCCESS;\r
+ } else {\r
+ ASSERT (0);\r
+ return EFI_DEVICE_ERROR;\r
+ }\r
+}\r
+\r
+/**\r
+ Sends an ATA command to an ATA device that is attached to the ATA controller. This function\r
+ supports both blocking I/O and non-blocking I/O. The blocking I/O functionality is required,\r
+ and the non-blocking I/O functionality is optional.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] Port The port number of the ATA device to send the command.\r
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to send the command.\r
+ If there is no port multiplier, then specify 0.\r
+ @param[in,out] Packet A pointer to the ATA command to send to the ATA device specified by Port\r
+ and PortMultiplierPort.\r
+ @param[in] Event If non-blocking I/O is not supported then Event is ignored, and blocking\r
+ I/O is performed. If Event is NULL, then blocking I/O is performed. If\r
+ Event is not NULL and non blocking I/O is supported, then non-blocking\r
+ I/O is performed, and Event will be signaled when the ATA command completes.\r
+\r
+ @retval EFI_SUCCESS The ATA command was sent by the host. For bi-directional commands,\r
+ InTransferLength bytes were transferred from InDataBuffer. For write and\r
+ bi-directional commands, OutTransferLength bytes were transferred by OutDataBuffer.\r
+ @retval EFI_BAD_BUFFER_SIZE The ATA command was not executed. The number of bytes that could be transferred\r
+ is returned in InTransferLength. For write and bi-directional commands,\r
+ OutTransferLength bytes were transferred by OutDataBuffer.\r
+ @retval EFI_NOT_READY The ATA command could not be sent because there are too many ATA commands\r
+ already queued. The caller may retry again later.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send the ATA command.\r
+ @retval EFI_INVALID_PARAMETER Port, PortMultiplierPort, or the contents of Acb are invalid. The ATA\r
+ command was not sent, so no additional status information is available.\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132AtaPassThru (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN UINT16 Port,\r
+ IN UINT16 PortMultiplierPort,\r
+ IN OUT EFI_ATA_PASS_THRU_COMMAND_PACKET *Packet,\r
+ IN EFI_EVENT Event OPTIONAL\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+ SATA_SI3132_PORT *SataPort;\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);\r
+ if (!SataDevice) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ SataPort = SataDevice->Port;\r
+\r
+ DEBUG ((EFI_D_INFO, "SiI3132AtaPassThru(%d,%d) : AtaCmd:0x%X Prot:%d\n", Port, PortMultiplierPort,\r
+ Packet->Acb->AtaCommand, Packet->Protocol));\r
+\r
+ return SiI3132AtaPassThruCommand (SataSiI3132Instance, SataPort, PortMultiplierPort, Packet, Event);\r
+}\r
+\r
+/**\r
+ Used to retrieve the list of legal port numbers for ATA devices on an ATA controller.\r
+ These can either be the list of ports where ATA devices are actually present or the\r
+ list of legal port numbers for the ATA controller. Regardless, the caller of this\r
+ function must probe the port number returned to see if an ATA device is actually\r
+ present at that location on the ATA controller.\r
+\r
+ The GetNextPort() function retrieves the port number on an ATA controller. If on input\r
+ Port is 0xFFFF, then the port number of the first port on the ATA controller is returned\r
+ in Port and EFI_SUCCESS is returned.\r
+\r
+ If Port is a port number that was returned on a previous call to GetNextPort(), then the\r
+ port number of the next port on the ATA controller is returned in Port, and EFI_SUCCESS\r
+ is returned. If Port is not 0xFFFF and Port was not returned on a previous call to\r
+ GetNextPort(), then EFI_INVALID_PARAMETER is returned.\r
+\r
+ If Port is the port number of the last port on the ATA controller, then EFI_NOT_FOUND is\r
+ returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in,out] Port On input, a pointer to the port number on the ATA controller.\r
+ On output, a pointer to the next port number on the ATA\r
+ controller. An input value of 0xFFFF retrieves the first port\r
+ number on the ATA controller.\r
+\r
+ @retval EFI_SUCCESS The next port number on the ATA controller was returned in Port.\r
+ @retval EFI_NOT_FOUND There are no more ports on this ATA controller.\r
+ @retval EFI_INVALID_PARAMETER Port is not 0xFFFF and Port was not returned on a previous call\r
+ to GetNextPort().\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132GetNextPort (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN OUT UINT16 *Port\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ UINTN PrevPort;\r
+ EFI_STATUS Status = EFI_SUCCESS;\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ PrevPort = *Port;\r
+\r
+ if (PrevPort == 0xFFFF) {\r
+ *Port = 0;\r
+ } else {\r
+ if (PrevPort < SATA_SII3132_MAXPORT) {\r
+ *Port = PrevPort + 1;\r
+ } else {\r
+ Status = EFI_NOT_FOUND;\r
+ }\r
+ }\r
+ return Status;\r
+}\r
+\r
+/**\r
+ Used to retrieve the list of legal port multiplier port numbers for ATA devices on a port of an ATA\r
+ controller. These can either be the list of port multiplier ports where ATA devices are actually\r
+ present on port or the list of legal port multiplier ports on that port. Regardless, the caller of this\r
+ function must probe the port number and port multiplier port number returned to see if an ATA\r
+ device is actually present.\r
+\r
+ The GetNextDevice() function retrieves the port multiplier port number of an ATA device\r
+ present on a port of an ATA controller.\r
+\r
+ If PortMultiplierPort points to a port multiplier port number value that was returned on a\r
+ previous call to GetNextDevice(), then the port multiplier port number of the next ATA device\r
+ on the port of the ATA controller is returned in PortMultiplierPort, and EFI_SUCCESS is\r
+ returned.\r
+\r
+ If PortMultiplierPort points to 0xFFFF, then the port multiplier port number of the first\r
+ ATA device on port of the ATA controller is returned in PortMultiplierPort and\r
+ EFI_SUCCESS is returned.\r
+\r
+ If PortMultiplierPort is not 0xFFFF and the value pointed to by PortMultiplierPort\r
+ was not returned on a previous call to GetNextDevice(), then EFI_INVALID_PARAMETER\r
+ is returned.\r
+\r
+ If PortMultiplierPort is the port multiplier port number of the last ATA device on the port of\r
+ the ATA controller, then EFI_NOT_FOUND is returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] Port The port number present on the ATA controller.\r
+ @param[in,out] PortMultiplierPort On input, a pointer to the port multiplier port number of an\r
+ ATA device present on the ATA controller.\r
+ If on input a PortMultiplierPort of 0xFFFF is specified,\r
+ then the port multiplier port number of the first ATA device\r
+ is returned. On output, a pointer to the port multiplier port\r
+ number of the next ATA device present on an ATA controller.\r
+\r
+ @retval EFI_SUCCESS The port multiplier port number of the next ATA device on the port\r
+ of the ATA controller was returned in PortMultiplierPort.\r
+ @retval EFI_NOT_FOUND There are no more ATA devices on this port of the ATA controller.\r
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is not 0xFFFF, and PortMultiplierPort was not\r
+ returned on a previous call to GetNextDevice().\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132GetNextDevice (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN UINT16 Port,\r
+ IN OUT UINT16 *PortMultiplierPort\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ SATA_SI3132_PORT *SataPort;\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+ LIST_ENTRY *List;\r
+ EFI_STATUS Status = EFI_SUCCESS;\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (Port >= SATA_SII3132_MAXPORT) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ SataPort = &(SataSiI3132Instance->Ports[Port]);\r
+\r
+ if (*PortMultiplierPort == 0xFFFF) {\r
+ List = SataPort->Devices.ForwardLink;\r
+ if (List != &SataPort->Devices) {\r
+ // The list is not empty, return the first device\r
+ *PortMultiplierPort = ((SATA_SI3132_DEVICE*)List)->Index;\r
+ } else {\r
+ Status = EFI_NOT_FOUND;\r
+ }\r
+ } else {\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, Port, *PortMultiplierPort);\r
+ if (SataDevice != NULL) {\r
+ // We have found the previous port multiplier, return the next one\r
+ List = SataDevice->Link.ForwardLink;\r
+ if (List != &SataPort->Devices) {\r
+ *PortMultiplierPort = ((SATA_SI3132_DEVICE*)List)->Index;\r
+ } else {\r
+ Status = EFI_NOT_FOUND;\r
+ }\r
+ } else {\r
+ Status = EFI_NOT_FOUND;\r
+ }\r
+ }\r
+ return Status;\r
+}\r
+\r
+/**\r
+ Used to allocate and build a device path node for an ATA device on an ATA controller.\r
+\r
+ The BuildDevicePath() function allocates and builds a single device node for the ATA\r
+ device specified by Port and PortMultiplierPort. If the ATA device specified by Port and\r
+ PortMultiplierPort is not present on the ATA controller, then EFI_NOT_FOUND is returned.\r
+ If DevicePath is NULL, then EFI_INVALID_PARAMETER is returned. If there are not enough\r
+ resources to allocate the device path node, then EFI_OUT_OF_RESOURCES is returned.\r
+\r
+ Otherwise, DevicePath is allocated with the boot service AllocatePool(), the contents of\r
+ DevicePath are initialized to describe the ATA device specified by Port and PortMultiplierPort,\r
+ and EFI_SUCCESS is returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] Port Port specifies the port number of the ATA device for which a\r
+ device path node is to be allocated and built.\r
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device for which a\r
+ device path node is to be allocated and built. If there is no\r
+ port multiplier, then specify 0.\r
+ @param[in,out] DevicePath A pointer to a single device path node that describes the ATA\r
+ device specified by Port and PortMultiplierPort. This function\r
+ is responsible for allocating the buffer DevicePath with the\r
+ boot service AllocatePool(). It is the caller's responsibility\r
+ to free DevicePath when the caller is finished with DevicePath.\r
+ @retval EFI_SUCCESS The device path node that describes the ATA device specified by\r
+ Port and PortMultiplierPort was allocated and returned in DevicePath.\r
+ @retval EFI_NOT_FOUND The ATA device specified by Port and PortMultiplierPort does not\r
+ exist on the ATA controller.\r
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.\r
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources to allocate DevicePath.\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132BuildDevicePath (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN UINT16 Port,\r
+ IN UINT16 PortMultiplierPort,\r
+ IN OUT EFI_DEVICE_PATH_PROTOCOL **DevicePath\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+ EFI_DEVICE_PATH_PROTOCOL *SiI3132DevicePath;\r
+\r
+ SATA_TRACE ("SiI3132BuildDevicePath()");\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);\r
+ if (SataDevice == NULL) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ SiI3132DevicePath = CreateDeviceNode (MESSAGING_DEVICE_PATH, MSG_SATA_DP, sizeof (SATA_DEVICE_PATH));\r
+ if (SiI3132DevicePath == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+\r
+ ((SATA_DEVICE_PATH*)SiI3132DevicePath)->HBAPortNumber = Port;\r
+ if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {\r
+ ((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = PortMultiplierPort;\r
+ } else {\r
+ //Temp:((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = SATA_HBA_DIRECT_CONNECT_FLAG;\r
+ ((SATA_DEVICE_PATH*)SiI3132DevicePath)->PortMultiplierPortNumber = 0;\r
+ }\r
+ ((SATA_DEVICE_PATH*)SiI3132DevicePath)->Lun = Port; //TODO: Search information how to define properly LUN (Logical Unit Number)\r
+\r
+ *DevicePath = SiI3132DevicePath;\r
+ return EFI_SUCCESS;\r
+}\r
+\r
+/**\r
+ Used to translate a device path node to a port number and port multiplier port number.\r
+\r
+ The GetDevice() function determines the port and port multiplier port number associated with\r
+ the ATA device described by DevicePath. If DevicePath is a device path node type that the\r
+ ATA Pass Thru driver supports, then the ATA Pass Thru driver will attempt to translate the contents\r
+ DevicePath into a port number and port multiplier port number.\r
+\r
+ If this translation is successful, then that port number and port multiplier port number are returned\r
+ in Port and PortMultiplierPort, and EFI_SUCCESS is returned.\r
+\r
+ If DevicePath, Port, or PortMultiplierPort are NULL, then EFI_INVALID_PARAMETER is returned.\r
+\r
+ If DevicePath is not a device path node type that the ATA Pass Thru driver supports, then\r
+ EFI_UNSUPPORTED is returned.\r
+\r
+ If DevicePath is a device path node type that the ATA Pass Thru driver supports, but there is not\r
+ a valid translation from DevicePath to a port number and port multiplier port number, then\r
+ EFI_NOT_FOUND is returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] DevicePath A pointer to the device path node that describes an ATA device on the\r
+ ATA controller.\r
+ @param[out] Port On return, points to the port number of an ATA device on the ATA controller.\r
+ @param[out] PortMultiplierPort On return, points to the port multiplier port number of an ATA device\r
+ on the ATA controller.\r
+\r
+ @retval EFI_SUCCESS DevicePath was successfully translated to a port number and port multiplier\r
+ port number, and they were returned in Port and PortMultiplierPort.\r
+ @retval EFI_INVALID_PARAMETER DevicePath is NULL.\r
+ @retval EFI_INVALID_PARAMETER Port is NULL.\r
+ @retval EFI_INVALID_PARAMETER PortMultiplierPort is NULL.\r
+ @retval EFI_UNSUPPORTED This driver does not support the device path node type in DevicePath.\r
+ @retval EFI_NOT_FOUND A valid translation from DevicePath to a port number and port multiplier\r
+ port number does not exist.\r
+**/\r
+EFI_STATUS\r
+SiI3132GetDevice (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN EFI_DEVICE_PATH_PROTOCOL *DevicePath,\r
+ OUT UINT16 *Port,\r
+ OUT UINT16 *PortMultiplierPort\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+\r
+ SATA_TRACE ("SiI3132GetDevice()");\r
+\r
+ if (!DevicePath || !Port || !PortMultiplierPort) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if ((DevicePath->Type != MESSAGING_DEVICE_PATH) || (DevicePath->SubType != MSG_SATA_DP)) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (((SATA_DEVICE_PATH*)DevicePath)->Lun >= SATA_SII3132_MAXPORT) {\r
+ return EFI_NOT_FOUND;\r
+ }\r
+\r
+ if (FeaturePcdGet (PcdSataSiI3132FeaturePMPSupport)) {\r
+ ASSERT (0); //TODO: Implement me!\r
+ return EFI_UNSUPPORTED;\r
+ } else {\r
+ *Port = ((SATA_DEVICE_PATH*)DevicePath)->Lun;\r
+ // Return the first Sata Sevice as there should be only one directly connected\r
+ *PortMultiplierPort = ((SATA_SI3132_DEVICE*)SataSiI3132Instance->Ports[*Port].Devices.ForwardLink)->Index;\r
+ return EFI_SUCCESS;\r
+ }\r
+}\r
+\r
+EFI_STATUS\r
+SiI3132HwResetPort (\r
+ IN SATA_SI3132_PORT *SataPort\r
+ )\r
+{\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+ UINT32 Value32;\r
+ UINTN Timeout;\r
+\r
+ SATA_TRACE ("SiI3132HwResetPort()");\r
+\r
+ PciIo = SataPort->Instance->PciIo;\r
+\r
+ // Clear Port Reset\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CONTROLCLEAR_REG, SII3132_PORT_CONTROL_RESET);\r
+\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);\r
+ ASSERT (!(Value32 & SII3132_PORT_CONTROL_RESET));\r
+\r
+ // Initialize error counters\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTDECODE, 0);\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTCRC, 0);\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ERRCOUNTHANDSHAKE, 0);\r
+\r
+ // Enable interrupts for command completion and command errors\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ENABLEINT_REG, SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR);\r
+\r
+ // Clear IRQ\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_ENABLEINT_REG, SII3132_PORT_INT_CMDCOMPL | SII3132_PORT_INT_CMDERR | SII3132_PORT_INT_PORTRDY | (1 << 3));\r
+\r
+ // Wait until Port Ready\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);\r
+ Timeout = 1000;\r
+ while ((Timeout > 0) && ((Value32 & SII3132_PORT_INT_PORTRDY) == 0)) {\r
+ gBS->Stall (1);\r
+ Timeout--;\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, &Value32);\r
+ }\r
+ // Clear IRQ\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_INTSTATUS_REG, SII3132_PORT_INT_PORTRDY);\r
+\r
+ if (Timeout == 0) {\r
+ SATA_TRACE ("SiI3132HwResetPort(): Timeout");\r
+ return EFI_TIMEOUT;\r
+ } else if ((Value32 & SII3132_PORT_INT_PORTRDY) == 0) {\r
+ SATA_TRACE ("SiI3132HwResetPort(): Port Not Ready");\r
+ return EFI_DEVICE_ERROR;\r
+ } else {\r
+ return EFI_SUCCESS;\r
+ }\r
+}\r
+\r
+/**\r
+ Resets a specific port on the ATA controller. This operation also resets all the ATA devices\r
+ connected to the port.\r
+\r
+ The ResetChannel() function resets an a specific port on an ATA controller. This operation\r
+ resets all the ATA devices connected to that port. If this ATA controller does not support\r
+ a reset port operation, then EFI_UNSUPPORTED is returned.\r
+\r
+ If a device error occurs while executing that port reset operation, then EFI_DEVICE_ERROR is\r
+ returned.\r
+\r
+ If a timeout occurs during the execution of the port reset operation, then EFI_TIMEOUT is returned.\r
+\r
+ If the port reset operation is completed, then EFI_SUCCESS is returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] Port The port number on the ATA controller.\r
+\r
+ @retval EFI_SUCCESS The ATA controller port was reset.\r
+ @retval EFI_UNSUPPORTED The ATA controller does not support a port reset operation.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA port.\r
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA port.\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132ResetPort (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN UINT16 Port\r
+ )\r
+{\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ SATA_SI3132_PORT *SataPort;\r
+\r
+ SATA_TRACE ("SiI3132ResetPort()");\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ if (Port >= SATA_SII3132_MAXPORT) {\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ SataPort = &(SataSiI3132Instance->Ports[Port]);\r
+ return SiI3132HwResetPort (SataPort);\r
+}\r
+\r
+/**\r
+ Resets an ATA device that is connected to an ATA controller.\r
+\r
+ The ResetDevice() function resets the ATA device specified by Port and PortMultiplierPort.\r
+ If this ATA controller does not support a device reset operation, then EFI_UNSUPPORTED is\r
+ returned.\r
+\r
+ If Port or PortMultiplierPort are not in a valid range for this ATA controller, then\r
+ EFI_INVALID_PARAMETER is returned.\r
+\r
+ If a device error occurs while executing that device reset operation, then EFI_DEVICE_ERROR\r
+ is returned.\r
+\r
+ If a timeout occurs during the execution of the device reset operation, then EFI_TIMEOUT is\r
+ returned.\r
+\r
+ If the device reset operation is completed, then EFI_SUCCESS is returned.\r
+\r
+ @param[in] This A pointer to the EFI_ATA_PASS_THRU_PROTOCOL instance.\r
+ @param[in] Port Port represents the port number of the ATA device to be reset.\r
+ @param[in] PortMultiplierPort The port multiplier port number of the ATA device to reset.\r
+ If there is no port multiplier, then specify 0.\r
+ @retval EFI_SUCCESS The ATA device specified by Port and PortMultiplierPort was reset.\r
+ @retval EFI_UNSUPPORTED The ATA controller does not support a device reset operation.\r
+ @retval EFI_INVALID_PARAMETER Port or PortMultiplierPort are invalid.\r
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to reset the ATA device\r
+ specified by Port and PortMultiplierPort.\r
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset the ATA device\r
+ specified by Port and PortMultiplierPort.\r
+\r
+**/\r
+EFI_STATUS\r
+SiI3132ResetDevice (\r
+ IN EFI_ATA_PASS_THRU_PROTOCOL *This,\r
+ IN UINT16 Port,\r
+ IN UINT16 PortMultiplierPort\r
+ )\r
+{\r
+ EFI_PCI_IO_PROTOCOL *PciIo;\r
+ SATA_SI3132_INSTANCE *SataSiI3132Instance;\r
+ SATA_SI3132_PORT *SataPort;\r
+ SATA_SI3132_DEVICE *SataDevice;\r
+ UINTN Timeout;\r
+ UINT32 Value32;\r
+\r
+ SATA_TRACE ("SiI3132ResetDevice()");\r
+\r
+ SataSiI3132Instance = INSTANCE_FROM_ATAPASSTHRU_THIS (This);\r
+ if (!SataSiI3132Instance) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ PciIo = SataSiI3132Instance->PciIo;\r
+\r
+ SataDevice = GetSataDevice (SataSiI3132Instance, Port, PortMultiplierPort);\r
+ if (!SataDevice) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ SataPort = SataDevice->Port;\r
+\r
+ SATA_PORT_WRITE32 (SataPort->RegBase + SII3132_PORT_CONTROLSET_REG, SII3132_PORT_DEVICE_RESET);\r
+\r
+ Timeout = 100;\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);\r
+ while ((Timeout > 0) && ((Value32 & SII3132_PORT_DEVICE_RESET) != 0)) {\r
+ gBS->Stall (1);\r
+ SATA_PORT_READ32 (SataPort->RegBase + SII3132_PORT_STATUS_REG, &Value32);\r
+ Timeout--;\r
+ }\r
+\r
+ if (Timeout == 0) {\r
+ SATA_TRACE ("SiI3132ResetDevice(): Timeout");\r
+ return EFI_TIMEOUT;\r
+ } else {\r
+ return EFI_SUCCESS;\r
+ }\r
+}\r
projects / mirror_edk2.git / blobdiff